1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Driver for ITE Tech Inc. IT8712F/IT8512 CIR 4 * 5 * Copyright (C) 2010 Juan Jesús García de Soria <skandalfo@gmail.com> 6 * 7 * Inspired by the original lirc_it87 and lirc_ite8709 drivers, on top of the 8 * skeleton provided by the nuvoton-cir driver. 9 * 10 * The lirc_it87 driver was originally written by Hans-Gunter Lutke Uphues 11 * <hg_lu@web.de> in 2001, with enhancements by Christoph Bartelmus 12 * <lirc@bartelmus.de>, Andrew Calkin <r_tay@hotmail.com> and James Edwards 13 * <jimbo-lirc@edwardsclan.net>. 14 * 15 * The lirc_ite8709 driver was written by Grégory Lardière 16 * <spmf2004-lirc@yahoo.fr> in 2008. 17 */ 18 19 #include <linux/kernel.h> 20 #include <linux/module.h> 21 #include <linux/pnp.h> 22 #include <linux/io.h> 23 #include <linux/interrupt.h> 24 #include <linux/sched.h> 25 #include <linux/delay.h> 26 #include <linux/slab.h> 27 #include <linux/input.h> 28 #include <linux/bitops.h> 29 #include <media/rc-core.h> 30 #include <linux/pci_ids.h> 31 32 #include "ite-cir.h" 33 34 /* module parameters */ 35 36 /* debug level */ 37 static int debug; 38 module_param(debug, int, S_IRUGO | S_IWUSR); 39 MODULE_PARM_DESC(debug, "Enable debugging output"); 40 41 /* low limit for RX carrier freq, Hz, 0 for no RX demodulation */ 42 static int rx_low_carrier_freq; 43 module_param(rx_low_carrier_freq, int, S_IRUGO | S_IWUSR); 44 MODULE_PARM_DESC(rx_low_carrier_freq, "Override low RX carrier frequency, Hz, 0 for no RX demodulation"); 45 46 /* high limit for RX carrier freq, Hz, 0 for no RX demodulation */ 47 static int rx_high_carrier_freq; 48 module_param(rx_high_carrier_freq, int, S_IRUGO | S_IWUSR); 49 MODULE_PARM_DESC(rx_high_carrier_freq, "Override high RX carrier frequency, Hz, 0 for no RX demodulation"); 50 51 /* override tx carrier frequency */ 52 static int tx_carrier_freq; 53 module_param(tx_carrier_freq, int, S_IRUGO | S_IWUSR); 54 MODULE_PARM_DESC(tx_carrier_freq, "Override TX carrier frequency, Hz"); 55 56 /* override tx duty cycle */ 57 static int tx_duty_cycle; 58 module_param(tx_duty_cycle, int, S_IRUGO | S_IWUSR); 59 MODULE_PARM_DESC(tx_duty_cycle, "Override TX duty cycle, 1-100"); 60 61 /* override default sample period */ 62 static long sample_period; 63 module_param(sample_period, long, S_IRUGO | S_IWUSR); 64 MODULE_PARM_DESC(sample_period, "Override carrier sample period, us"); 65 66 /* override detected model id */ 67 static int model_number = -1; 68 module_param(model_number, int, S_IRUGO | S_IWUSR); 69 MODULE_PARM_DESC(model_number, "Use this model number, don't autodetect"); 70 71 72 /* HW-independent code functions */ 73 74 /* check whether carrier frequency is high frequency */ 75 static inline bool ite_is_high_carrier_freq(unsigned int freq) 76 { 77 return freq >= ITE_HCF_MIN_CARRIER_FREQ; 78 } 79 80 /* get the bits required to program the carrier frequency in CFQ bits, 81 * unshifted */ 82 static u8 ite_get_carrier_freq_bits(unsigned int freq) 83 { 84 if (ite_is_high_carrier_freq(freq)) { 85 if (freq < 425000) 86 return ITE_CFQ_400; 87 88 else if (freq < 465000) 89 return ITE_CFQ_450; 90 91 else if (freq < 490000) 92 return ITE_CFQ_480; 93 94 else 95 return ITE_CFQ_500; 96 } else { 97 /* trim to limits */ 98 if (freq < ITE_LCF_MIN_CARRIER_FREQ) 99 freq = ITE_LCF_MIN_CARRIER_FREQ; 100 if (freq > ITE_LCF_MAX_CARRIER_FREQ) 101 freq = ITE_LCF_MAX_CARRIER_FREQ; 102 103 /* convert to kHz and subtract the base freq */ 104 freq = 105 DIV_ROUND_CLOSEST(freq - ITE_LCF_MIN_CARRIER_FREQ, 106 1000); 107 108 return (u8) freq; 109 } 110 } 111 112 /* get the bits required to program the pulse with in TXMPW */ 113 static u8 ite_get_pulse_width_bits(unsigned int freq, int duty_cycle) 114 { 115 unsigned long period_ns, on_ns; 116 117 /* sanitize freq into range */ 118 if (freq < ITE_LCF_MIN_CARRIER_FREQ) 119 freq = ITE_LCF_MIN_CARRIER_FREQ; 120 if (freq > ITE_HCF_MAX_CARRIER_FREQ) 121 freq = ITE_HCF_MAX_CARRIER_FREQ; 122 123 period_ns = 1000000000UL / freq; 124 on_ns = period_ns * duty_cycle / 100; 125 126 if (ite_is_high_carrier_freq(freq)) { 127 if (on_ns < 750) 128 return ITE_TXMPW_A; 129 130 else if (on_ns < 850) 131 return ITE_TXMPW_B; 132 133 else if (on_ns < 950) 134 return ITE_TXMPW_C; 135 136 else if (on_ns < 1080) 137 return ITE_TXMPW_D; 138 139 else 140 return ITE_TXMPW_E; 141 } else { 142 if (on_ns < 6500) 143 return ITE_TXMPW_A; 144 145 else if (on_ns < 7850) 146 return ITE_TXMPW_B; 147 148 else if (on_ns < 9650) 149 return ITE_TXMPW_C; 150 151 else if (on_ns < 11950) 152 return ITE_TXMPW_D; 153 154 else 155 return ITE_TXMPW_E; 156 } 157 } 158 159 /* decode raw bytes as received by the hardware, and push them to the ir-core 160 * layer */ 161 static void ite_decode_bytes(struct ite_dev *dev, const u8 * data, int 162 length) 163 { 164 u32 sample_period; 165 unsigned long *ldata; 166 unsigned int next_one, next_zero, size; 167 struct ir_raw_event ev = {}; 168 169 if (length == 0) 170 return; 171 172 sample_period = dev->params.sample_period; 173 ldata = (unsigned long *)data; 174 size = length << 3; 175 next_one = find_next_bit_le(ldata, size, 0); 176 if (next_one > 0) { 177 ev.pulse = true; 178 ev.duration = 179 ITE_BITS_TO_US(next_one, sample_period); 180 ir_raw_event_store_with_filter(dev->rdev, &ev); 181 } 182 183 while (next_one < size) { 184 next_zero = find_next_zero_bit_le(ldata, size, next_one + 1); 185 ev.pulse = false; 186 ev.duration = ITE_BITS_TO_US(next_zero - next_one, sample_period); 187 ir_raw_event_store_with_filter(dev->rdev, &ev); 188 189 if (next_zero < size) { 190 next_one = 191 find_next_bit_le(ldata, 192 size, 193 next_zero + 1); 194 ev.pulse = true; 195 ev.duration = 196 ITE_BITS_TO_US(next_one - next_zero, 197 sample_period); 198 ir_raw_event_store_with_filter 199 (dev->rdev, &ev); 200 } else 201 next_one = size; 202 } 203 204 ir_raw_event_handle(dev->rdev); 205 206 ite_dbg_verbose("decoded %d bytes.", length); 207 } 208 209 /* set all the rx/tx carrier parameters; this must be called with the device 210 * spinlock held */ 211 static void ite_set_carrier_params(struct ite_dev *dev) 212 { 213 unsigned int freq, low_freq, high_freq; 214 int allowance; 215 bool use_demodulator; 216 bool for_tx = dev->transmitting; 217 218 ite_dbg("%s called", __func__); 219 220 if (for_tx) { 221 /* we don't need no stinking calculations */ 222 freq = dev->params.tx_carrier_freq; 223 allowance = ITE_RXDCR_DEFAULT; 224 use_demodulator = false; 225 } else { 226 low_freq = dev->params.rx_low_carrier_freq; 227 high_freq = dev->params.rx_high_carrier_freq; 228 229 if (low_freq == 0) { 230 /* don't demodulate */ 231 freq = 232 ITE_DEFAULT_CARRIER_FREQ; 233 allowance = ITE_RXDCR_DEFAULT; 234 use_demodulator = false; 235 } else { 236 /* calculate the middle freq */ 237 freq = (low_freq + high_freq) / 2; 238 239 /* calculate the allowance */ 240 allowance = 241 DIV_ROUND_CLOSEST(10000 * (high_freq - low_freq), 242 ITE_RXDCR_PER_10000_STEP 243 * (high_freq + low_freq)); 244 245 if (allowance < 1) 246 allowance = 1; 247 248 if (allowance > ITE_RXDCR_MAX) 249 allowance = ITE_RXDCR_MAX; 250 251 use_demodulator = true; 252 } 253 } 254 255 /* set the carrier parameters in a device-dependent way */ 256 dev->params.set_carrier_params(dev, ite_is_high_carrier_freq(freq), 257 use_demodulator, ite_get_carrier_freq_bits(freq), allowance, 258 ite_get_pulse_width_bits(freq, dev->params.tx_duty_cycle)); 259 } 260 261 /* interrupt service routine for incoming and outgoing CIR data */ 262 static irqreturn_t ite_cir_isr(int irq, void *data) 263 { 264 struct ite_dev *dev = data; 265 unsigned long flags; 266 irqreturn_t ret = IRQ_RETVAL(IRQ_NONE); 267 u8 rx_buf[ITE_RX_FIFO_LEN]; 268 int rx_bytes; 269 int iflags; 270 271 ite_dbg_verbose("%s firing", __func__); 272 273 /* grab the spinlock */ 274 spin_lock_irqsave(&dev->lock, flags); 275 276 /* read the interrupt flags */ 277 iflags = dev->params.get_irq_causes(dev); 278 279 /* check for the receive interrupt */ 280 if (iflags & (ITE_IRQ_RX_FIFO | ITE_IRQ_RX_FIFO_OVERRUN)) { 281 /* read the FIFO bytes */ 282 rx_bytes = 283 dev->params.get_rx_bytes(dev, rx_buf, 284 ITE_RX_FIFO_LEN); 285 286 if (rx_bytes > 0) { 287 /* drop the spinlock, since the ir-core layer 288 * may call us back again through 289 * ite_s_idle() */ 290 spin_unlock_irqrestore(&dev-> 291 lock, 292 flags); 293 294 /* decode the data we've just received */ 295 ite_decode_bytes(dev, rx_buf, 296 rx_bytes); 297 298 /* reacquire the spinlock */ 299 spin_lock_irqsave(&dev->lock, 300 flags); 301 302 /* mark the interrupt as serviced */ 303 ret = IRQ_RETVAL(IRQ_HANDLED); 304 } 305 } else if (iflags & ITE_IRQ_TX_FIFO) { 306 /* FIFO space available interrupt */ 307 ite_dbg_verbose("got interrupt for TX FIFO"); 308 309 /* wake any sleeping transmitter */ 310 wake_up_interruptible(&dev->tx_queue); 311 312 /* mark the interrupt as serviced */ 313 ret = IRQ_RETVAL(IRQ_HANDLED); 314 } 315 316 /* drop the spinlock */ 317 spin_unlock_irqrestore(&dev->lock, flags); 318 319 ite_dbg_verbose("%s done returning %d", __func__, (int)ret); 320 321 return ret; 322 } 323 324 /* set the rx carrier freq range, guess it's in Hz... */ 325 static int ite_set_rx_carrier_range(struct rc_dev *rcdev, u32 carrier_low, u32 326 carrier_high) 327 { 328 unsigned long flags; 329 struct ite_dev *dev = rcdev->priv; 330 331 spin_lock_irqsave(&dev->lock, flags); 332 dev->params.rx_low_carrier_freq = carrier_low; 333 dev->params.rx_high_carrier_freq = carrier_high; 334 ite_set_carrier_params(dev); 335 spin_unlock_irqrestore(&dev->lock, flags); 336 337 return 0; 338 } 339 340 /* set the tx carrier freq, guess it's in Hz... */ 341 static int ite_set_tx_carrier(struct rc_dev *rcdev, u32 carrier) 342 { 343 unsigned long flags; 344 struct ite_dev *dev = rcdev->priv; 345 346 spin_lock_irqsave(&dev->lock, flags); 347 dev->params.tx_carrier_freq = carrier; 348 ite_set_carrier_params(dev); 349 spin_unlock_irqrestore(&dev->lock, flags); 350 351 return 0; 352 } 353 354 /* set the tx duty cycle by controlling the pulse width */ 355 static int ite_set_tx_duty_cycle(struct rc_dev *rcdev, u32 duty_cycle) 356 { 357 unsigned long flags; 358 struct ite_dev *dev = rcdev->priv; 359 360 spin_lock_irqsave(&dev->lock, flags); 361 dev->params.tx_duty_cycle = duty_cycle; 362 ite_set_carrier_params(dev); 363 spin_unlock_irqrestore(&dev->lock, flags); 364 365 return 0; 366 } 367 368 /* transmit out IR pulses; what you get here is a batch of alternating 369 * pulse/space/pulse/space lengths that we should write out completely through 370 * the FIFO, blocking on a full FIFO */ 371 static int ite_tx_ir(struct rc_dev *rcdev, unsigned *txbuf, unsigned n) 372 { 373 unsigned long flags; 374 struct ite_dev *dev = rcdev->priv; 375 bool is_pulse = false; 376 int remaining_us, fifo_avail, fifo_remaining, last_idx = 0; 377 int max_rle_us, next_rle_us; 378 int ret = n; 379 u8 last_sent[ITE_TX_FIFO_LEN]; 380 u8 val; 381 382 ite_dbg("%s called", __func__); 383 384 /* clear the array just in case */ 385 memset(last_sent, 0, sizeof(last_sent)); 386 387 spin_lock_irqsave(&dev->lock, flags); 388 389 /* let everybody know we're now transmitting */ 390 dev->transmitting = true; 391 392 /* and set the carrier values for transmission */ 393 ite_set_carrier_params(dev); 394 395 /* calculate how much time we can send in one byte */ 396 max_rle_us = 397 (ITE_BAUDRATE_DIVISOR * dev->params.sample_period * 398 ITE_TX_MAX_RLE) / 1000; 399 400 /* disable the receiver */ 401 dev->params.disable_rx(dev); 402 403 /* this is where we'll begin filling in the FIFO, until it's full. 404 * then we'll just activate the interrupt, wait for it to wake us up 405 * again, disable it, continue filling the FIFO... until everything 406 * has been pushed out */ 407 fifo_avail = 408 ITE_TX_FIFO_LEN - dev->params.get_tx_used_slots(dev); 409 410 while (n > 0 && dev->in_use) { 411 /* transmit the next sample */ 412 is_pulse = !is_pulse; 413 remaining_us = *(txbuf++); 414 n--; 415 416 ite_dbg("%s: %ld", 417 ((is_pulse) ? "pulse" : "space"), 418 (long int) 419 remaining_us); 420 421 /* repeat while the pulse is non-zero length */ 422 while (remaining_us > 0 && dev->in_use) { 423 if (remaining_us > max_rle_us) 424 next_rle_us = max_rle_us; 425 426 else 427 next_rle_us = remaining_us; 428 429 remaining_us -= next_rle_us; 430 431 /* check what's the length we have to pump out */ 432 val = (ITE_TX_MAX_RLE * next_rle_us) / max_rle_us; 433 434 /* put it into the sent buffer */ 435 last_sent[last_idx++] = val; 436 last_idx &= (ITE_TX_FIFO_LEN); 437 438 /* encode it for 7 bits */ 439 val = (val - 1) & ITE_TX_RLE_MASK; 440 441 /* take into account pulse/space prefix */ 442 if (is_pulse) 443 val |= ITE_TX_PULSE; 444 445 else 446 val |= ITE_TX_SPACE; 447 448 /* 449 * if we get to 0 available, read again, just in case 450 * some other slot got freed 451 */ 452 if (fifo_avail <= 0) 453 fifo_avail = ITE_TX_FIFO_LEN - dev->params.get_tx_used_slots(dev); 454 455 /* if it's still full */ 456 if (fifo_avail <= 0) { 457 /* enable the tx interrupt */ 458 dev->params. 459 enable_tx_interrupt(dev); 460 461 /* drop the spinlock */ 462 spin_unlock_irqrestore(&dev->lock, flags); 463 464 /* wait for the FIFO to empty enough */ 465 wait_event_interruptible(dev->tx_queue, (fifo_avail = ITE_TX_FIFO_LEN - dev->params.get_tx_used_slots(dev)) >= 8); 466 467 /* get the spinlock again */ 468 spin_lock_irqsave(&dev->lock, flags); 469 470 /* disable the tx interrupt again. */ 471 dev->params. 472 disable_tx_interrupt(dev); 473 } 474 475 /* now send the byte through the FIFO */ 476 dev->params.put_tx_byte(dev, val); 477 fifo_avail--; 478 } 479 } 480 481 /* wait and don't return until the whole FIFO has been sent out; 482 * otherwise we could configure the RX carrier params instead of the 483 * TX ones while the transmission is still being performed! */ 484 fifo_remaining = dev->params.get_tx_used_slots(dev); 485 remaining_us = 0; 486 while (fifo_remaining > 0) { 487 fifo_remaining--; 488 last_idx--; 489 last_idx &= (ITE_TX_FIFO_LEN - 1); 490 remaining_us += last_sent[last_idx]; 491 } 492 remaining_us = (remaining_us * max_rle_us) / (ITE_TX_MAX_RLE); 493 494 /* drop the spinlock while we sleep */ 495 spin_unlock_irqrestore(&dev->lock, flags); 496 497 /* sleep remaining_us microseconds */ 498 mdelay(DIV_ROUND_UP(remaining_us, 1000)); 499 500 /* reacquire the spinlock */ 501 spin_lock_irqsave(&dev->lock, flags); 502 503 /* now we're not transmitting anymore */ 504 dev->transmitting = false; 505 506 /* and set the carrier values for reception */ 507 ite_set_carrier_params(dev); 508 509 /* re-enable the receiver */ 510 if (dev->in_use) 511 dev->params.enable_rx(dev); 512 513 /* notify transmission end */ 514 wake_up_interruptible(&dev->tx_ended); 515 516 spin_unlock_irqrestore(&dev->lock, flags); 517 518 return ret; 519 } 520 521 /* idle the receiver if needed */ 522 static void ite_s_idle(struct rc_dev *rcdev, bool enable) 523 { 524 unsigned long flags; 525 struct ite_dev *dev = rcdev->priv; 526 527 ite_dbg("%s called", __func__); 528 529 if (enable) { 530 spin_lock_irqsave(&dev->lock, flags); 531 dev->params.idle_rx(dev); 532 spin_unlock_irqrestore(&dev->lock, flags); 533 } 534 } 535 536 537 /* IT8712F HW-specific functions */ 538 539 /* retrieve a bitmask of the current causes for a pending interrupt; this may 540 * be composed of ITE_IRQ_TX_FIFO, ITE_IRQ_RX_FIFO and ITE_IRQ_RX_FIFO_OVERRUN 541 * */ 542 static int it87_get_irq_causes(struct ite_dev *dev) 543 { 544 u8 iflags; 545 int ret = 0; 546 547 ite_dbg("%s called", __func__); 548 549 /* read the interrupt flags */ 550 iflags = inb(dev->cir_addr + IT87_IIR) & IT87_II; 551 552 switch (iflags) { 553 case IT87_II_RXDS: 554 ret = ITE_IRQ_RX_FIFO; 555 break; 556 case IT87_II_RXFO: 557 ret = ITE_IRQ_RX_FIFO_OVERRUN; 558 break; 559 case IT87_II_TXLDL: 560 ret = ITE_IRQ_TX_FIFO; 561 break; 562 } 563 564 return ret; 565 } 566 567 /* set the carrier parameters; to be called with the spinlock held */ 568 static void it87_set_carrier_params(struct ite_dev *dev, bool high_freq, 569 bool use_demodulator, 570 u8 carrier_freq_bits, u8 allowance_bits, 571 u8 pulse_width_bits) 572 { 573 u8 val; 574 575 ite_dbg("%s called", __func__); 576 577 /* program the RCR register */ 578 val = inb(dev->cir_addr + IT87_RCR) 579 & ~(IT87_HCFS | IT87_RXEND | IT87_RXDCR); 580 581 if (high_freq) 582 val |= IT87_HCFS; 583 584 if (use_demodulator) 585 val |= IT87_RXEND; 586 587 val |= allowance_bits; 588 589 outb(val, dev->cir_addr + IT87_RCR); 590 591 /* program the TCR2 register */ 592 outb((carrier_freq_bits << IT87_CFQ_SHIFT) | pulse_width_bits, 593 dev->cir_addr + IT87_TCR2); 594 } 595 596 /* read up to buf_size bytes from the RX FIFO; to be called with the spinlock 597 * held */ 598 static int it87_get_rx_bytes(struct ite_dev *dev, u8 * buf, int buf_size) 599 { 600 int fifo, read = 0; 601 602 ite_dbg("%s called", __func__); 603 604 /* read how many bytes are still in the FIFO */ 605 fifo = inb(dev->cir_addr + IT87_RSR) & IT87_RXFBC; 606 607 while (fifo > 0 && buf_size > 0) { 608 *(buf++) = inb(dev->cir_addr + IT87_DR); 609 fifo--; 610 read++; 611 buf_size--; 612 } 613 614 return read; 615 } 616 617 /* return how many bytes are still in the FIFO; this will be called 618 * with the device spinlock NOT HELD while waiting for the TX FIFO to get 619 * empty; let's expect this won't be a problem */ 620 static int it87_get_tx_used_slots(struct ite_dev *dev) 621 { 622 ite_dbg("%s called", __func__); 623 624 return inb(dev->cir_addr + IT87_TSR) & IT87_TXFBC; 625 } 626 627 /* put a byte to the TX fifo; this should be called with the spinlock held */ 628 static void it87_put_tx_byte(struct ite_dev *dev, u8 value) 629 { 630 outb(value, dev->cir_addr + IT87_DR); 631 } 632 633 /* idle the receiver so that we won't receive samples until another 634 pulse is detected; this must be called with the device spinlock held */ 635 static void it87_idle_rx(struct ite_dev *dev) 636 { 637 ite_dbg("%s called", __func__); 638 639 /* disable streaming by clearing RXACT writing it as 1 */ 640 outb(inb(dev->cir_addr + IT87_RCR) | IT87_RXACT, 641 dev->cir_addr + IT87_RCR); 642 643 /* clear the FIFO */ 644 outb(inb(dev->cir_addr + IT87_TCR1) | IT87_FIFOCLR, 645 dev->cir_addr + IT87_TCR1); 646 } 647 648 /* disable the receiver; this must be called with the device spinlock held */ 649 static void it87_disable_rx(struct ite_dev *dev) 650 { 651 ite_dbg("%s called", __func__); 652 653 /* disable the receiver interrupts */ 654 outb(inb(dev->cir_addr + IT87_IER) & ~(IT87_RDAIE | IT87_RFOIE), 655 dev->cir_addr + IT87_IER); 656 657 /* disable the receiver */ 658 outb(inb(dev->cir_addr + IT87_RCR) & ~IT87_RXEN, 659 dev->cir_addr + IT87_RCR); 660 661 /* clear the FIFO and RXACT (actually RXACT should have been cleared 662 * in the previous outb() call) */ 663 it87_idle_rx(dev); 664 } 665 666 /* enable the receiver; this must be called with the device spinlock held */ 667 static void it87_enable_rx(struct ite_dev *dev) 668 { 669 ite_dbg("%s called", __func__); 670 671 /* enable the receiver by setting RXEN */ 672 outb(inb(dev->cir_addr + IT87_RCR) | IT87_RXEN, 673 dev->cir_addr + IT87_RCR); 674 675 /* just prepare it to idle for the next reception */ 676 it87_idle_rx(dev); 677 678 /* enable the receiver interrupts and master enable flag */ 679 outb(inb(dev->cir_addr + IT87_IER) | IT87_RDAIE | IT87_RFOIE | IT87_IEC, 680 dev->cir_addr + IT87_IER); 681 } 682 683 /* disable the transmitter interrupt; this must be called with the device 684 * spinlock held */ 685 static void it87_disable_tx_interrupt(struct ite_dev *dev) 686 { 687 ite_dbg("%s called", __func__); 688 689 /* disable the transmitter interrupts */ 690 outb(inb(dev->cir_addr + IT87_IER) & ~IT87_TLDLIE, 691 dev->cir_addr + IT87_IER); 692 } 693 694 /* enable the transmitter interrupt; this must be called with the device 695 * spinlock held */ 696 static void it87_enable_tx_interrupt(struct ite_dev *dev) 697 { 698 ite_dbg("%s called", __func__); 699 700 /* enable the transmitter interrupts and master enable flag */ 701 outb(inb(dev->cir_addr + IT87_IER) | IT87_TLDLIE | IT87_IEC, 702 dev->cir_addr + IT87_IER); 703 } 704 705 /* disable the device; this must be called with the device spinlock held */ 706 static void it87_disable(struct ite_dev *dev) 707 { 708 ite_dbg("%s called", __func__); 709 710 /* clear out all interrupt enable flags */ 711 outb(inb(dev->cir_addr + IT87_IER) & 712 ~(IT87_IEC | IT87_RFOIE | IT87_RDAIE | IT87_TLDLIE), 713 dev->cir_addr + IT87_IER); 714 715 /* disable the receiver */ 716 it87_disable_rx(dev); 717 718 /* erase the FIFO */ 719 outb(IT87_FIFOCLR | inb(dev->cir_addr + IT87_TCR1), 720 dev->cir_addr + IT87_TCR1); 721 } 722 723 /* initialize the hardware */ 724 static void it87_init_hardware(struct ite_dev *dev) 725 { 726 ite_dbg("%s called", __func__); 727 728 /* enable just the baud rate divisor register, 729 disabling all the interrupts at the same time */ 730 outb((inb(dev->cir_addr + IT87_IER) & 731 ~(IT87_IEC | IT87_RFOIE | IT87_RDAIE | IT87_TLDLIE)) | IT87_BR, 732 dev->cir_addr + IT87_IER); 733 734 /* write out the baud rate divisor */ 735 outb(ITE_BAUDRATE_DIVISOR & 0xff, dev->cir_addr + IT87_BDLR); 736 outb((ITE_BAUDRATE_DIVISOR >> 8) & 0xff, dev->cir_addr + IT87_BDHR); 737 738 /* disable the baud rate divisor register again */ 739 outb(inb(dev->cir_addr + IT87_IER) & ~IT87_BR, 740 dev->cir_addr + IT87_IER); 741 742 /* program the RCR register defaults */ 743 outb(ITE_RXDCR_DEFAULT, dev->cir_addr + IT87_RCR); 744 745 /* program the TCR1 register */ 746 outb(IT87_TXMPM_DEFAULT | IT87_TXENDF | IT87_TXRLE 747 | IT87_FIFOTL_DEFAULT | IT87_FIFOCLR, 748 dev->cir_addr + IT87_TCR1); 749 750 /* program the carrier parameters */ 751 ite_set_carrier_params(dev); 752 } 753 754 /* IT8512F on ITE8708 HW-specific functions */ 755 756 /* retrieve a bitmask of the current causes for a pending interrupt; this may 757 * be composed of ITE_IRQ_TX_FIFO, ITE_IRQ_RX_FIFO and ITE_IRQ_RX_FIFO_OVERRUN 758 * */ 759 static int it8708_get_irq_causes(struct ite_dev *dev) 760 { 761 u8 iflags; 762 int ret = 0; 763 764 ite_dbg("%s called", __func__); 765 766 /* read the interrupt flags */ 767 iflags = inb(dev->cir_addr + IT8708_C0IIR); 768 769 if (iflags & IT85_TLDLI) 770 ret |= ITE_IRQ_TX_FIFO; 771 if (iflags & IT85_RDAI) 772 ret |= ITE_IRQ_RX_FIFO; 773 if (iflags & IT85_RFOI) 774 ret |= ITE_IRQ_RX_FIFO_OVERRUN; 775 776 return ret; 777 } 778 779 /* set the carrier parameters; to be called with the spinlock held */ 780 static void it8708_set_carrier_params(struct ite_dev *dev, bool high_freq, 781 bool use_demodulator, 782 u8 carrier_freq_bits, u8 allowance_bits, 783 u8 pulse_width_bits) 784 { 785 u8 val; 786 787 ite_dbg("%s called", __func__); 788 789 /* program the C0CFR register, with HRAE=1 */ 790 outb(inb(dev->cir_addr + IT8708_BANKSEL) | IT8708_HRAE, 791 dev->cir_addr + IT8708_BANKSEL); 792 793 val = (inb(dev->cir_addr + IT8708_C0CFR) 794 & ~(IT85_HCFS | IT85_CFQ)) | carrier_freq_bits; 795 796 if (high_freq) 797 val |= IT85_HCFS; 798 799 outb(val, dev->cir_addr + IT8708_C0CFR); 800 801 outb(inb(dev->cir_addr + IT8708_BANKSEL) & ~IT8708_HRAE, 802 dev->cir_addr + IT8708_BANKSEL); 803 804 /* program the C0RCR register */ 805 val = inb(dev->cir_addr + IT8708_C0RCR) 806 & ~(IT85_RXEND | IT85_RXDCR); 807 808 if (use_demodulator) 809 val |= IT85_RXEND; 810 811 val |= allowance_bits; 812 813 outb(val, dev->cir_addr + IT8708_C0RCR); 814 815 /* program the C0TCR register */ 816 val = inb(dev->cir_addr + IT8708_C0TCR) & ~IT85_TXMPW; 817 val |= pulse_width_bits; 818 outb(val, dev->cir_addr + IT8708_C0TCR); 819 } 820 821 /* read up to buf_size bytes from the RX FIFO; to be called with the spinlock 822 * held */ 823 static int it8708_get_rx_bytes(struct ite_dev *dev, u8 * buf, int buf_size) 824 { 825 int fifo, read = 0; 826 827 ite_dbg("%s called", __func__); 828 829 /* read how many bytes are still in the FIFO */ 830 fifo = inb(dev->cir_addr + IT8708_C0RFSR) & IT85_RXFBC; 831 832 while (fifo > 0 && buf_size > 0) { 833 *(buf++) = inb(dev->cir_addr + IT8708_C0DR); 834 fifo--; 835 read++; 836 buf_size--; 837 } 838 839 return read; 840 } 841 842 /* return how many bytes are still in the FIFO; this will be called 843 * with the device spinlock NOT HELD while waiting for the TX FIFO to get 844 * empty; let's expect this won't be a problem */ 845 static int it8708_get_tx_used_slots(struct ite_dev *dev) 846 { 847 ite_dbg("%s called", __func__); 848 849 return inb(dev->cir_addr + IT8708_C0TFSR) & IT85_TXFBC; 850 } 851 852 /* put a byte to the TX fifo; this should be called with the spinlock held */ 853 static void it8708_put_tx_byte(struct ite_dev *dev, u8 value) 854 { 855 outb(value, dev->cir_addr + IT8708_C0DR); 856 } 857 858 /* idle the receiver so that we won't receive samples until another 859 pulse is detected; this must be called with the device spinlock held */ 860 static void it8708_idle_rx(struct ite_dev *dev) 861 { 862 ite_dbg("%s called", __func__); 863 864 /* disable streaming by clearing RXACT writing it as 1 */ 865 outb(inb(dev->cir_addr + IT8708_C0RCR) | IT85_RXACT, 866 dev->cir_addr + IT8708_C0RCR); 867 868 /* clear the FIFO */ 869 outb(inb(dev->cir_addr + IT8708_C0MSTCR) | IT85_FIFOCLR, 870 dev->cir_addr + IT8708_C0MSTCR); 871 } 872 873 /* disable the receiver; this must be called with the device spinlock held */ 874 static void it8708_disable_rx(struct ite_dev *dev) 875 { 876 ite_dbg("%s called", __func__); 877 878 /* disable the receiver interrupts */ 879 outb(inb(dev->cir_addr + IT8708_C0IER) & 880 ~(IT85_RDAIE | IT85_RFOIE), 881 dev->cir_addr + IT8708_C0IER); 882 883 /* disable the receiver */ 884 outb(inb(dev->cir_addr + IT8708_C0RCR) & ~IT85_RXEN, 885 dev->cir_addr + IT8708_C0RCR); 886 887 /* clear the FIFO and RXACT (actually RXACT should have been cleared 888 * in the previous outb() call) */ 889 it8708_idle_rx(dev); 890 } 891 892 /* enable the receiver; this must be called with the device spinlock held */ 893 static void it8708_enable_rx(struct ite_dev *dev) 894 { 895 ite_dbg("%s called", __func__); 896 897 /* enable the receiver by setting RXEN */ 898 outb(inb(dev->cir_addr + IT8708_C0RCR) | IT85_RXEN, 899 dev->cir_addr + IT8708_C0RCR); 900 901 /* just prepare it to idle for the next reception */ 902 it8708_idle_rx(dev); 903 904 /* enable the receiver interrupts and master enable flag */ 905 outb(inb(dev->cir_addr + IT8708_C0IER) 906 |IT85_RDAIE | IT85_RFOIE | IT85_IEC, 907 dev->cir_addr + IT8708_C0IER); 908 } 909 910 /* disable the transmitter interrupt; this must be called with the device 911 * spinlock held */ 912 static void it8708_disable_tx_interrupt(struct ite_dev *dev) 913 { 914 ite_dbg("%s called", __func__); 915 916 /* disable the transmitter interrupts */ 917 outb(inb(dev->cir_addr + IT8708_C0IER) & ~IT85_TLDLIE, 918 dev->cir_addr + IT8708_C0IER); 919 } 920 921 /* enable the transmitter interrupt; this must be called with the device 922 * spinlock held */ 923 static void it8708_enable_tx_interrupt(struct ite_dev *dev) 924 { 925 ite_dbg("%s called", __func__); 926 927 /* enable the transmitter interrupts and master enable flag */ 928 outb(inb(dev->cir_addr + IT8708_C0IER) 929 |IT85_TLDLIE | IT85_IEC, 930 dev->cir_addr + IT8708_C0IER); 931 } 932 933 /* disable the device; this must be called with the device spinlock held */ 934 static void it8708_disable(struct ite_dev *dev) 935 { 936 ite_dbg("%s called", __func__); 937 938 /* clear out all interrupt enable flags */ 939 outb(inb(dev->cir_addr + IT8708_C0IER) & 940 ~(IT85_IEC | IT85_RFOIE | IT85_RDAIE | IT85_TLDLIE), 941 dev->cir_addr + IT8708_C0IER); 942 943 /* disable the receiver */ 944 it8708_disable_rx(dev); 945 946 /* erase the FIFO */ 947 outb(IT85_FIFOCLR | inb(dev->cir_addr + IT8708_C0MSTCR), 948 dev->cir_addr + IT8708_C0MSTCR); 949 } 950 951 /* initialize the hardware */ 952 static void it8708_init_hardware(struct ite_dev *dev) 953 { 954 ite_dbg("%s called", __func__); 955 956 /* disable all the interrupts */ 957 outb(inb(dev->cir_addr + IT8708_C0IER) & 958 ~(IT85_IEC | IT85_RFOIE | IT85_RDAIE | IT85_TLDLIE), 959 dev->cir_addr + IT8708_C0IER); 960 961 /* program the baud rate divisor */ 962 outb(inb(dev->cir_addr + IT8708_BANKSEL) | IT8708_HRAE, 963 dev->cir_addr + IT8708_BANKSEL); 964 965 outb(ITE_BAUDRATE_DIVISOR & 0xff, dev->cir_addr + IT8708_C0BDLR); 966 outb((ITE_BAUDRATE_DIVISOR >> 8) & 0xff, 967 dev->cir_addr + IT8708_C0BDHR); 968 969 outb(inb(dev->cir_addr + IT8708_BANKSEL) & ~IT8708_HRAE, 970 dev->cir_addr + IT8708_BANKSEL); 971 972 /* program the C0MSTCR register defaults */ 973 outb((inb(dev->cir_addr + IT8708_C0MSTCR) & 974 ~(IT85_ILSEL | IT85_ILE | IT85_FIFOTL | 975 IT85_FIFOCLR | IT85_RESET)) | 976 IT85_FIFOTL_DEFAULT, 977 dev->cir_addr + IT8708_C0MSTCR); 978 979 /* program the C0RCR register defaults */ 980 outb((inb(dev->cir_addr + IT8708_C0RCR) & 981 ~(IT85_RXEN | IT85_RDWOS | IT85_RXEND | 982 IT85_RXACT | IT85_RXDCR)) | 983 ITE_RXDCR_DEFAULT, 984 dev->cir_addr + IT8708_C0RCR); 985 986 /* program the C0TCR register defaults */ 987 outb((inb(dev->cir_addr + IT8708_C0TCR) & 988 ~(IT85_TXMPM | IT85_TXMPW)) 989 |IT85_TXRLE | IT85_TXENDF | 990 IT85_TXMPM_DEFAULT | IT85_TXMPW_DEFAULT, 991 dev->cir_addr + IT8708_C0TCR); 992 993 /* program the carrier parameters */ 994 ite_set_carrier_params(dev); 995 } 996 997 /* IT8512F on ITE8709 HW-specific functions */ 998 999 /* read a byte from the SRAM module */ 1000 static inline u8 it8709_rm(struct ite_dev *dev, int index) 1001 { 1002 outb(index, dev->cir_addr + IT8709_RAM_IDX); 1003 return inb(dev->cir_addr + IT8709_RAM_VAL); 1004 } 1005 1006 /* write a byte to the SRAM module */ 1007 static inline void it8709_wm(struct ite_dev *dev, u8 val, int index) 1008 { 1009 outb(index, dev->cir_addr + IT8709_RAM_IDX); 1010 outb(val, dev->cir_addr + IT8709_RAM_VAL); 1011 } 1012 1013 static void it8709_wait(struct ite_dev *dev) 1014 { 1015 int i = 0; 1016 /* 1017 * loop until device tells it's ready to continue 1018 * iterations count is usually ~750 but can sometimes achieve 13000 1019 */ 1020 for (i = 0; i < 15000; i++) { 1021 udelay(2); 1022 if (it8709_rm(dev, IT8709_MODE) == IT8709_IDLE) 1023 break; 1024 } 1025 } 1026 1027 /* read the value of a CIR register */ 1028 static u8 it8709_rr(struct ite_dev *dev, int index) 1029 { 1030 /* just wait in case the previous access was a write */ 1031 it8709_wait(dev); 1032 it8709_wm(dev, index, IT8709_REG_IDX); 1033 it8709_wm(dev, IT8709_READ, IT8709_MODE); 1034 1035 /* wait for the read data to be available */ 1036 it8709_wait(dev); 1037 1038 /* return the read value */ 1039 return it8709_rm(dev, IT8709_REG_VAL); 1040 } 1041 1042 /* write the value of a CIR register */ 1043 static void it8709_wr(struct ite_dev *dev, u8 val, int index) 1044 { 1045 /* we wait before writing, and not afterwards, since this allows us to 1046 * pipeline the host CPU with the microcontroller */ 1047 it8709_wait(dev); 1048 it8709_wm(dev, val, IT8709_REG_VAL); 1049 it8709_wm(dev, index, IT8709_REG_IDX); 1050 it8709_wm(dev, IT8709_WRITE, IT8709_MODE); 1051 } 1052 1053 /* retrieve a bitmask of the current causes for a pending interrupt; this may 1054 * be composed of ITE_IRQ_TX_FIFO, ITE_IRQ_RX_FIFO and ITE_IRQ_RX_FIFO_OVERRUN 1055 * */ 1056 static int it8709_get_irq_causes(struct ite_dev *dev) 1057 { 1058 u8 iflags; 1059 int ret = 0; 1060 1061 ite_dbg("%s called", __func__); 1062 1063 /* read the interrupt flags */ 1064 iflags = it8709_rm(dev, IT8709_IIR); 1065 1066 if (iflags & IT85_TLDLI) 1067 ret |= ITE_IRQ_TX_FIFO; 1068 if (iflags & IT85_RDAI) 1069 ret |= ITE_IRQ_RX_FIFO; 1070 if (iflags & IT85_RFOI) 1071 ret |= ITE_IRQ_RX_FIFO_OVERRUN; 1072 1073 return ret; 1074 } 1075 1076 /* set the carrier parameters; to be called with the spinlock held */ 1077 static void it8709_set_carrier_params(struct ite_dev *dev, bool high_freq, 1078 bool use_demodulator, 1079 u8 carrier_freq_bits, u8 allowance_bits, 1080 u8 pulse_width_bits) 1081 { 1082 u8 val; 1083 1084 ite_dbg("%s called", __func__); 1085 1086 val = (it8709_rr(dev, IT85_C0CFR) 1087 &~(IT85_HCFS | IT85_CFQ)) | 1088 carrier_freq_bits; 1089 1090 if (high_freq) 1091 val |= IT85_HCFS; 1092 1093 it8709_wr(dev, val, IT85_C0CFR); 1094 1095 /* program the C0RCR register */ 1096 val = it8709_rr(dev, IT85_C0RCR) 1097 & ~(IT85_RXEND | IT85_RXDCR); 1098 1099 if (use_demodulator) 1100 val |= IT85_RXEND; 1101 1102 val |= allowance_bits; 1103 1104 it8709_wr(dev, val, IT85_C0RCR); 1105 1106 /* program the C0TCR register */ 1107 val = it8709_rr(dev, IT85_C0TCR) & ~IT85_TXMPW; 1108 val |= pulse_width_bits; 1109 it8709_wr(dev, val, IT85_C0TCR); 1110 } 1111 1112 /* read up to buf_size bytes from the RX FIFO; to be called with the spinlock 1113 * held */ 1114 static int it8709_get_rx_bytes(struct ite_dev *dev, u8 * buf, int buf_size) 1115 { 1116 int fifo, read = 0; 1117 1118 ite_dbg("%s called", __func__); 1119 1120 /* read how many bytes are still in the FIFO */ 1121 fifo = it8709_rm(dev, IT8709_RFSR) & IT85_RXFBC; 1122 1123 while (fifo > 0 && buf_size > 0) { 1124 *(buf++) = it8709_rm(dev, IT8709_FIFO + read); 1125 fifo--; 1126 read++; 1127 buf_size--; 1128 } 1129 1130 /* 'clear' the FIFO by setting the writing index to 0; this is 1131 * completely bound to be racy, but we can't help it, since it's a 1132 * limitation of the protocol */ 1133 it8709_wm(dev, 0, IT8709_RFSR); 1134 1135 return read; 1136 } 1137 1138 /* return how many bytes are still in the FIFO; this will be called 1139 * with the device spinlock NOT HELD while waiting for the TX FIFO to get 1140 * empty; let's expect this won't be a problem */ 1141 static int it8709_get_tx_used_slots(struct ite_dev *dev) 1142 { 1143 ite_dbg("%s called", __func__); 1144 1145 return it8709_rr(dev, IT85_C0TFSR) & IT85_TXFBC; 1146 } 1147 1148 /* put a byte to the TX fifo; this should be called with the spinlock held */ 1149 static void it8709_put_tx_byte(struct ite_dev *dev, u8 value) 1150 { 1151 it8709_wr(dev, value, IT85_C0DR); 1152 } 1153 1154 /* idle the receiver so that we won't receive samples until another 1155 pulse is detected; this must be called with the device spinlock held */ 1156 static void it8709_idle_rx(struct ite_dev *dev) 1157 { 1158 ite_dbg("%s called", __func__); 1159 1160 /* disable streaming by clearing RXACT writing it as 1 */ 1161 it8709_wr(dev, it8709_rr(dev, IT85_C0RCR) | IT85_RXACT, 1162 IT85_C0RCR); 1163 1164 /* clear the FIFO */ 1165 it8709_wr(dev, it8709_rr(dev, IT85_C0MSTCR) | IT85_FIFOCLR, 1166 IT85_C0MSTCR); 1167 } 1168 1169 /* disable the receiver; this must be called with the device spinlock held */ 1170 static void it8709_disable_rx(struct ite_dev *dev) 1171 { 1172 ite_dbg("%s called", __func__); 1173 1174 /* disable the receiver interrupts */ 1175 it8709_wr(dev, it8709_rr(dev, IT85_C0IER) & 1176 ~(IT85_RDAIE | IT85_RFOIE), 1177 IT85_C0IER); 1178 1179 /* disable the receiver */ 1180 it8709_wr(dev, it8709_rr(dev, IT85_C0RCR) & ~IT85_RXEN, 1181 IT85_C0RCR); 1182 1183 /* clear the FIFO and RXACT (actually RXACT should have been cleared 1184 * in the previous it8709_wr(dev, ) call) */ 1185 it8709_idle_rx(dev); 1186 } 1187 1188 /* enable the receiver; this must be called with the device spinlock held */ 1189 static void it8709_enable_rx(struct ite_dev *dev) 1190 { 1191 ite_dbg("%s called", __func__); 1192 1193 /* enable the receiver by setting RXEN */ 1194 it8709_wr(dev, it8709_rr(dev, IT85_C0RCR) | IT85_RXEN, 1195 IT85_C0RCR); 1196 1197 /* just prepare it to idle for the next reception */ 1198 it8709_idle_rx(dev); 1199 1200 /* enable the receiver interrupts and master enable flag */ 1201 it8709_wr(dev, it8709_rr(dev, IT85_C0IER) 1202 |IT85_RDAIE | IT85_RFOIE | IT85_IEC, 1203 IT85_C0IER); 1204 } 1205 1206 /* disable the transmitter interrupt; this must be called with the device 1207 * spinlock held */ 1208 static void it8709_disable_tx_interrupt(struct ite_dev *dev) 1209 { 1210 ite_dbg("%s called", __func__); 1211 1212 /* disable the transmitter interrupts */ 1213 it8709_wr(dev, it8709_rr(dev, IT85_C0IER) & ~IT85_TLDLIE, 1214 IT85_C0IER); 1215 } 1216 1217 /* enable the transmitter interrupt; this must be called with the device 1218 * spinlock held */ 1219 static void it8709_enable_tx_interrupt(struct ite_dev *dev) 1220 { 1221 ite_dbg("%s called", __func__); 1222 1223 /* enable the transmitter interrupts and master enable flag */ 1224 it8709_wr(dev, it8709_rr(dev, IT85_C0IER) 1225 |IT85_TLDLIE | IT85_IEC, 1226 IT85_C0IER); 1227 } 1228 1229 /* disable the device; this must be called with the device spinlock held */ 1230 static void it8709_disable(struct ite_dev *dev) 1231 { 1232 ite_dbg("%s called", __func__); 1233 1234 /* clear out all interrupt enable flags */ 1235 it8709_wr(dev, it8709_rr(dev, IT85_C0IER) & 1236 ~(IT85_IEC | IT85_RFOIE | IT85_RDAIE | IT85_TLDLIE), 1237 IT85_C0IER); 1238 1239 /* disable the receiver */ 1240 it8709_disable_rx(dev); 1241 1242 /* erase the FIFO */ 1243 it8709_wr(dev, IT85_FIFOCLR | it8709_rr(dev, IT85_C0MSTCR), 1244 IT85_C0MSTCR); 1245 } 1246 1247 /* initialize the hardware */ 1248 static void it8709_init_hardware(struct ite_dev *dev) 1249 { 1250 ite_dbg("%s called", __func__); 1251 1252 /* disable all the interrupts */ 1253 it8709_wr(dev, it8709_rr(dev, IT85_C0IER) & 1254 ~(IT85_IEC | IT85_RFOIE | IT85_RDAIE | IT85_TLDLIE), 1255 IT85_C0IER); 1256 1257 /* program the baud rate divisor */ 1258 it8709_wr(dev, ITE_BAUDRATE_DIVISOR & 0xff, IT85_C0BDLR); 1259 it8709_wr(dev, (ITE_BAUDRATE_DIVISOR >> 8) & 0xff, 1260 IT85_C0BDHR); 1261 1262 /* program the C0MSTCR register defaults */ 1263 it8709_wr(dev, (it8709_rr(dev, IT85_C0MSTCR) & 1264 ~(IT85_ILSEL | IT85_ILE | IT85_FIFOTL 1265 | IT85_FIFOCLR | IT85_RESET)) | IT85_FIFOTL_DEFAULT, 1266 IT85_C0MSTCR); 1267 1268 /* program the C0RCR register defaults */ 1269 it8709_wr(dev, (it8709_rr(dev, IT85_C0RCR) & 1270 ~(IT85_RXEN | IT85_RDWOS | IT85_RXEND | IT85_RXACT 1271 | IT85_RXDCR)) | ITE_RXDCR_DEFAULT, 1272 IT85_C0RCR); 1273 1274 /* program the C0TCR register defaults */ 1275 it8709_wr(dev, (it8709_rr(dev, IT85_C0TCR) & ~(IT85_TXMPM | IT85_TXMPW)) 1276 | IT85_TXRLE | IT85_TXENDF | IT85_TXMPM_DEFAULT 1277 | IT85_TXMPW_DEFAULT, 1278 IT85_C0TCR); 1279 1280 /* program the carrier parameters */ 1281 ite_set_carrier_params(dev); 1282 } 1283 1284 1285 /* generic hardware setup/teardown code */ 1286 1287 /* activate the device for use */ 1288 static int ite_open(struct rc_dev *rcdev) 1289 { 1290 struct ite_dev *dev = rcdev->priv; 1291 unsigned long flags; 1292 1293 ite_dbg("%s called", __func__); 1294 1295 spin_lock_irqsave(&dev->lock, flags); 1296 dev->in_use = true; 1297 1298 /* enable the receiver */ 1299 dev->params.enable_rx(dev); 1300 1301 spin_unlock_irqrestore(&dev->lock, flags); 1302 1303 return 0; 1304 } 1305 1306 /* deactivate the device for use */ 1307 static void ite_close(struct rc_dev *rcdev) 1308 { 1309 struct ite_dev *dev = rcdev->priv; 1310 unsigned long flags; 1311 1312 ite_dbg("%s called", __func__); 1313 1314 spin_lock_irqsave(&dev->lock, flags); 1315 dev->in_use = false; 1316 1317 /* wait for any transmission to end */ 1318 spin_unlock_irqrestore(&dev->lock, flags); 1319 wait_event_interruptible(dev->tx_ended, !dev->transmitting); 1320 spin_lock_irqsave(&dev->lock, flags); 1321 1322 dev->params.disable(dev); 1323 1324 spin_unlock_irqrestore(&dev->lock, flags); 1325 } 1326 1327 /* supported models and their parameters */ 1328 static const struct ite_dev_params ite_dev_descs[] = { 1329 { /* 0: ITE8704 */ 1330 .model = "ITE8704 CIR transceiver", 1331 .io_region_size = IT87_IOREG_LENGTH, 1332 .io_rsrc_no = 0, 1333 .hw_tx_capable = true, 1334 .sample_period = (u32) (1000000000ULL / 115200), 1335 .tx_carrier_freq = 38000, 1336 .tx_duty_cycle = 33, 1337 .rx_low_carrier_freq = 0, 1338 .rx_high_carrier_freq = 0, 1339 1340 /* operations */ 1341 .get_irq_causes = it87_get_irq_causes, 1342 .enable_rx = it87_enable_rx, 1343 .idle_rx = it87_idle_rx, 1344 .disable_rx = it87_idle_rx, 1345 .get_rx_bytes = it87_get_rx_bytes, 1346 .enable_tx_interrupt = it87_enable_tx_interrupt, 1347 .disable_tx_interrupt = it87_disable_tx_interrupt, 1348 .get_tx_used_slots = it87_get_tx_used_slots, 1349 .put_tx_byte = it87_put_tx_byte, 1350 .disable = it87_disable, 1351 .init_hardware = it87_init_hardware, 1352 .set_carrier_params = it87_set_carrier_params, 1353 }, 1354 { /* 1: ITE8713 */ 1355 .model = "ITE8713 CIR transceiver", 1356 .io_region_size = IT87_IOREG_LENGTH, 1357 .io_rsrc_no = 0, 1358 .hw_tx_capable = true, 1359 .sample_period = (u32) (1000000000ULL / 115200), 1360 .tx_carrier_freq = 38000, 1361 .tx_duty_cycle = 33, 1362 .rx_low_carrier_freq = 0, 1363 .rx_high_carrier_freq = 0, 1364 1365 /* operations */ 1366 .get_irq_causes = it87_get_irq_causes, 1367 .enable_rx = it87_enable_rx, 1368 .idle_rx = it87_idle_rx, 1369 .disable_rx = it87_idle_rx, 1370 .get_rx_bytes = it87_get_rx_bytes, 1371 .enable_tx_interrupt = it87_enable_tx_interrupt, 1372 .disable_tx_interrupt = it87_disable_tx_interrupt, 1373 .get_tx_used_slots = it87_get_tx_used_slots, 1374 .put_tx_byte = it87_put_tx_byte, 1375 .disable = it87_disable, 1376 .init_hardware = it87_init_hardware, 1377 .set_carrier_params = it87_set_carrier_params, 1378 }, 1379 { /* 2: ITE8708 */ 1380 .model = "ITE8708 CIR transceiver", 1381 .io_region_size = IT8708_IOREG_LENGTH, 1382 .io_rsrc_no = 0, 1383 .hw_tx_capable = true, 1384 .sample_period = (u32) (1000000000ULL / 115200), 1385 .tx_carrier_freq = 38000, 1386 .tx_duty_cycle = 33, 1387 .rx_low_carrier_freq = 0, 1388 .rx_high_carrier_freq = 0, 1389 1390 /* operations */ 1391 .get_irq_causes = it8708_get_irq_causes, 1392 .enable_rx = it8708_enable_rx, 1393 .idle_rx = it8708_idle_rx, 1394 .disable_rx = it8708_idle_rx, 1395 .get_rx_bytes = it8708_get_rx_bytes, 1396 .enable_tx_interrupt = it8708_enable_tx_interrupt, 1397 .disable_tx_interrupt = 1398 it8708_disable_tx_interrupt, 1399 .get_tx_used_slots = it8708_get_tx_used_slots, 1400 .put_tx_byte = it8708_put_tx_byte, 1401 .disable = it8708_disable, 1402 .init_hardware = it8708_init_hardware, 1403 .set_carrier_params = it8708_set_carrier_params, 1404 }, 1405 { /* 3: ITE8709 */ 1406 .model = "ITE8709 CIR transceiver", 1407 .io_region_size = IT8709_IOREG_LENGTH, 1408 .io_rsrc_no = 2, 1409 .hw_tx_capable = true, 1410 .sample_period = (u32) (1000000000ULL / 115200), 1411 .tx_carrier_freq = 38000, 1412 .tx_duty_cycle = 33, 1413 .rx_low_carrier_freq = 0, 1414 .rx_high_carrier_freq = 0, 1415 1416 /* operations */ 1417 .get_irq_causes = it8709_get_irq_causes, 1418 .enable_rx = it8709_enable_rx, 1419 .idle_rx = it8709_idle_rx, 1420 .disable_rx = it8709_idle_rx, 1421 .get_rx_bytes = it8709_get_rx_bytes, 1422 .enable_tx_interrupt = it8709_enable_tx_interrupt, 1423 .disable_tx_interrupt = 1424 it8709_disable_tx_interrupt, 1425 .get_tx_used_slots = it8709_get_tx_used_slots, 1426 .put_tx_byte = it8709_put_tx_byte, 1427 .disable = it8709_disable, 1428 .init_hardware = it8709_init_hardware, 1429 .set_carrier_params = it8709_set_carrier_params, 1430 }, 1431 }; 1432 1433 static const struct pnp_device_id ite_ids[] = { 1434 {"ITE8704", 0}, /* Default model */ 1435 {"ITE8713", 1}, /* CIR found in EEEBox 1501U */ 1436 {"ITE8708", 2}, /* Bridged IT8512 */ 1437 {"ITE8709", 3}, /* SRAM-Bridged IT8512 */ 1438 {"", 0}, 1439 }; 1440 1441 /* allocate memory, probe hardware, and initialize everything */ 1442 static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id 1443 *dev_id) 1444 { 1445 const struct ite_dev_params *dev_desc = NULL; 1446 struct ite_dev *itdev = NULL; 1447 struct rc_dev *rdev = NULL; 1448 int ret = -ENOMEM; 1449 int model_no; 1450 int io_rsrc_no; 1451 1452 ite_dbg("%s called", __func__); 1453 1454 itdev = kzalloc(sizeof(struct ite_dev), GFP_KERNEL); 1455 if (!itdev) 1456 return ret; 1457 1458 /* input device for IR remote (and tx) */ 1459 rdev = rc_allocate_device(RC_DRIVER_IR_RAW); 1460 if (!rdev) 1461 goto exit_free_dev_rdev; 1462 itdev->rdev = rdev; 1463 1464 ret = -ENODEV; 1465 1466 /* get the model number */ 1467 model_no = (int)dev_id->driver_data; 1468 ite_pr(KERN_NOTICE, "Auto-detected model: %s\n", 1469 ite_dev_descs[model_no].model); 1470 1471 if (model_number >= 0 && model_number < ARRAY_SIZE(ite_dev_descs)) { 1472 model_no = model_number; 1473 ite_pr(KERN_NOTICE, "The model has been fixed by a module parameter."); 1474 } 1475 1476 ite_pr(KERN_NOTICE, "Using model: %s\n", ite_dev_descs[model_no].model); 1477 1478 /* get the description for the device */ 1479 dev_desc = &ite_dev_descs[model_no]; 1480 io_rsrc_no = dev_desc->io_rsrc_no; 1481 1482 /* validate pnp resources */ 1483 if (!pnp_port_valid(pdev, io_rsrc_no) || 1484 pnp_port_len(pdev, io_rsrc_no) != dev_desc->io_region_size) { 1485 dev_err(&pdev->dev, "IR PNP Port not valid!\n"); 1486 goto exit_free_dev_rdev; 1487 } 1488 1489 if (!pnp_irq_valid(pdev, 0)) { 1490 dev_err(&pdev->dev, "PNP IRQ not valid!\n"); 1491 goto exit_free_dev_rdev; 1492 } 1493 1494 /* store resource values */ 1495 itdev->cir_addr = pnp_port_start(pdev, io_rsrc_no); 1496 itdev->cir_irq = pnp_irq(pdev, 0); 1497 1498 /* initialize spinlocks */ 1499 spin_lock_init(&itdev->lock); 1500 1501 /* set driver data into the pnp device */ 1502 pnp_set_drvdata(pdev, itdev); 1503 itdev->pdev = pdev; 1504 1505 /* initialize waitqueues for transmission */ 1506 init_waitqueue_head(&itdev->tx_queue); 1507 init_waitqueue_head(&itdev->tx_ended); 1508 1509 /* copy model-specific parameters */ 1510 itdev->params = *dev_desc; 1511 1512 /* apply any overrides */ 1513 if (sample_period > 0) 1514 itdev->params.sample_period = sample_period; 1515 1516 if (tx_carrier_freq > 0) 1517 itdev->params.tx_carrier_freq = tx_carrier_freq; 1518 1519 if (tx_duty_cycle > 0 && tx_duty_cycle <= 100) 1520 itdev->params.tx_duty_cycle = tx_duty_cycle; 1521 1522 if (rx_low_carrier_freq > 0) 1523 itdev->params.rx_low_carrier_freq = rx_low_carrier_freq; 1524 1525 if (rx_high_carrier_freq > 0) 1526 itdev->params.rx_high_carrier_freq = rx_high_carrier_freq; 1527 1528 /* print out parameters */ 1529 ite_pr(KERN_NOTICE, "TX-capable: %d\n", (int) 1530 itdev->params.hw_tx_capable); 1531 ite_pr(KERN_NOTICE, "Sample period (ns): %ld\n", (long) 1532 itdev->params.sample_period); 1533 ite_pr(KERN_NOTICE, "TX carrier frequency (Hz): %d\n", (int) 1534 itdev->params.tx_carrier_freq); 1535 ite_pr(KERN_NOTICE, "TX duty cycle (%%): %d\n", (int) 1536 itdev->params.tx_duty_cycle); 1537 ite_pr(KERN_NOTICE, "RX low carrier frequency (Hz): %d\n", (int) 1538 itdev->params.rx_low_carrier_freq); 1539 ite_pr(KERN_NOTICE, "RX high carrier frequency (Hz): %d\n", (int) 1540 itdev->params.rx_high_carrier_freq); 1541 1542 /* set up hardware initial state */ 1543 itdev->params.init_hardware(itdev); 1544 1545 /* set up ir-core props */ 1546 rdev->priv = itdev; 1547 rdev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER; 1548 rdev->open = ite_open; 1549 rdev->close = ite_close; 1550 rdev->s_idle = ite_s_idle; 1551 rdev->s_rx_carrier_range = ite_set_rx_carrier_range; 1552 /* FIFO threshold is 17 bytes, so 17 * 8 samples minimum */ 1553 rdev->min_timeout = 17 * 8 * ITE_BAUDRATE_DIVISOR * 1554 itdev->params.sample_period / 1000; 1555 rdev->timeout = IR_DEFAULT_TIMEOUT; 1556 rdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT; 1557 rdev->rx_resolution = ITE_BAUDRATE_DIVISOR * 1558 itdev->params.sample_period / 1000; 1559 rdev->tx_resolution = ITE_BAUDRATE_DIVISOR * 1560 itdev->params.sample_period / 1000; 1561 1562 /* set up transmitter related values if needed */ 1563 if (itdev->params.hw_tx_capable) { 1564 rdev->tx_ir = ite_tx_ir; 1565 rdev->s_tx_carrier = ite_set_tx_carrier; 1566 rdev->s_tx_duty_cycle = ite_set_tx_duty_cycle; 1567 } 1568 1569 rdev->device_name = dev_desc->model; 1570 rdev->input_id.bustype = BUS_HOST; 1571 rdev->input_id.vendor = PCI_VENDOR_ID_ITE; 1572 rdev->input_id.product = 0; 1573 rdev->input_id.version = 0; 1574 rdev->driver_name = ITE_DRIVER_NAME; 1575 rdev->map_name = RC_MAP_RC6_MCE; 1576 1577 ret = rc_register_device(rdev); 1578 if (ret) 1579 goto exit_free_dev_rdev; 1580 1581 ret = -EBUSY; 1582 /* now claim resources */ 1583 if (!request_region(itdev->cir_addr, 1584 dev_desc->io_region_size, ITE_DRIVER_NAME)) 1585 goto exit_unregister_device; 1586 1587 if (request_irq(itdev->cir_irq, ite_cir_isr, IRQF_SHARED, 1588 ITE_DRIVER_NAME, (void *)itdev)) 1589 goto exit_release_cir_addr; 1590 1591 ite_pr(KERN_NOTICE, "driver has been successfully loaded\n"); 1592 1593 return 0; 1594 1595 exit_release_cir_addr: 1596 release_region(itdev->cir_addr, itdev->params.io_region_size); 1597 exit_unregister_device: 1598 rc_unregister_device(rdev); 1599 rdev = NULL; 1600 exit_free_dev_rdev: 1601 rc_free_device(rdev); 1602 kfree(itdev); 1603 1604 return ret; 1605 } 1606 1607 static void ite_remove(struct pnp_dev *pdev) 1608 { 1609 struct ite_dev *dev = pnp_get_drvdata(pdev); 1610 unsigned long flags; 1611 1612 ite_dbg("%s called", __func__); 1613 1614 spin_lock_irqsave(&dev->lock, flags); 1615 1616 /* disable hardware */ 1617 dev->params.disable(dev); 1618 1619 spin_unlock_irqrestore(&dev->lock, flags); 1620 1621 /* free resources */ 1622 free_irq(dev->cir_irq, dev); 1623 release_region(dev->cir_addr, dev->params.io_region_size); 1624 1625 rc_unregister_device(dev->rdev); 1626 1627 kfree(dev); 1628 } 1629 1630 static int ite_suspend(struct pnp_dev *pdev, pm_message_t state) 1631 { 1632 struct ite_dev *dev = pnp_get_drvdata(pdev); 1633 unsigned long flags; 1634 1635 ite_dbg("%s called", __func__); 1636 1637 /* wait for any transmission to end */ 1638 wait_event_interruptible(dev->tx_ended, !dev->transmitting); 1639 1640 spin_lock_irqsave(&dev->lock, flags); 1641 1642 /* disable all interrupts */ 1643 dev->params.disable(dev); 1644 1645 spin_unlock_irqrestore(&dev->lock, flags); 1646 1647 return 0; 1648 } 1649 1650 static int ite_resume(struct pnp_dev *pdev) 1651 { 1652 struct ite_dev *dev = pnp_get_drvdata(pdev); 1653 unsigned long flags; 1654 1655 ite_dbg("%s called", __func__); 1656 1657 spin_lock_irqsave(&dev->lock, flags); 1658 1659 /* reinitialize hardware config registers */ 1660 dev->params.init_hardware(dev); 1661 /* enable the receiver */ 1662 dev->params.enable_rx(dev); 1663 1664 spin_unlock_irqrestore(&dev->lock, flags); 1665 1666 return 0; 1667 } 1668 1669 static void ite_shutdown(struct pnp_dev *pdev) 1670 { 1671 struct ite_dev *dev = pnp_get_drvdata(pdev); 1672 unsigned long flags; 1673 1674 ite_dbg("%s called", __func__); 1675 1676 spin_lock_irqsave(&dev->lock, flags); 1677 1678 /* disable all interrupts */ 1679 dev->params.disable(dev); 1680 1681 spin_unlock_irqrestore(&dev->lock, flags); 1682 } 1683 1684 static struct pnp_driver ite_driver = { 1685 .name = ITE_DRIVER_NAME, 1686 .id_table = ite_ids, 1687 .probe = ite_probe, 1688 .remove = ite_remove, 1689 .suspend = ite_suspend, 1690 .resume = ite_resume, 1691 .shutdown = ite_shutdown, 1692 }; 1693 1694 MODULE_DEVICE_TABLE(pnp, ite_ids); 1695 MODULE_DESCRIPTION("ITE Tech Inc. IT8712F/ITE8512F CIR driver"); 1696 1697 MODULE_AUTHOR("Juan J. Garcia de Soria <skandalfo@gmail.com>"); 1698 MODULE_LICENSE("GPL"); 1699 1700 module_pnp_driver(ite_driver); 1701