1 /* 2 * USB ATI Remote support 3 * 4 * Copyright (c) 2011, 2012 Anssi Hannula <anssi.hannula@iki.fi> 5 * Version 2.2.0 Copyright (c) 2004 Torrey Hoffman <thoffman@arnor.net> 6 * Version 2.1.1 Copyright (c) 2002 Vladimir Dergachev 7 * 8 * This 2.2.0 version is a rewrite / cleanup of the 2.1.1 driver, including 9 * porting to the 2.6 kernel interfaces, along with other modification 10 * to better match the style of the existing usb/input drivers. However, the 11 * protocol and hardware handling is essentially unchanged from 2.1.1. 12 * 13 * The 2.1.1 driver was derived from the usbati_remote and usbkbd drivers by 14 * Vojtech Pavlik. 15 * 16 * Changes: 17 * 18 * Feb 2004: Torrey Hoffman <thoffman@arnor.net> 19 * Version 2.2.0 20 * Jun 2004: Torrey Hoffman <thoffman@arnor.net> 21 * Version 2.2.1 22 * Added key repeat support contributed by: 23 * Vincent Vanackere <vanackere@lif.univ-mrs.fr> 24 * Added support for the "Lola" remote contributed by: 25 * Seth Cohn <sethcohn@yahoo.com> 26 * 27 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 28 * 29 * This program is free software; you can redistribute it and/or modify 30 * it under the terms of the GNU General Public License as published by 31 * the Free Software Foundation; either version 2 of the License, or 32 * (at your option) any later version. 33 * 34 * This program is distributed in the hope that it will be useful, 35 * but WITHOUT ANY WARRANTY; without even the implied warranty of 36 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 37 * GNU General Public License for more details. 38 * 39 * You should have received a copy of the GNU General Public License 40 * along with this program; if not, write to the Free Software 41 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 42 * 43 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 44 * 45 * Hardware & software notes 46 * 47 * These remote controls are distributed by ATI as part of their 48 * "All-In-Wonder" video card packages. The receiver self-identifies as a 49 * "USB Receiver" with manufacturer "X10 Wireless Technology Inc". 50 * 51 * The "Lola" remote is available from X10. See: 52 * http://www.x10.com/products/lola_sg1.htm 53 * The Lola is similar to the ATI remote but has no mouse support, and slightly 54 * different keys. 55 * 56 * It is possible to use multiple receivers and remotes on multiple computers 57 * simultaneously by configuring them to use specific channels. 58 * 59 * The RF protocol used by the remote supports 16 distinct channels, 1 to 16. 60 * Actually, it may even support more, at least in some revisions of the 61 * hardware. 62 * 63 * Each remote can be configured to transmit on one channel as follows: 64 * - Press and hold the "hand icon" button. 65 * - When the red LED starts to blink, let go of the "hand icon" button. 66 * - When it stops blinking, input the channel code as two digits, from 01 67 * to 16, and press the hand icon again. 68 * 69 * The timing can be a little tricky. Try loading the module with debug=1 70 * to have the kernel print out messages about the remote control number 71 * and mask. Note: debugging prints remote numbers as zero-based hexadecimal. 72 * 73 * The driver has a "channel_mask" parameter. This bitmask specifies which 74 * channels will be ignored by the module. To mask out channels, just add 75 * all the 2^channel_number values together. 76 * 77 * For instance, set channel_mask = 2^4 = 16 (binary 10000) to make ati_remote 78 * ignore signals coming from remote controls transmitting on channel 4, but 79 * accept all other channels. 80 * 81 * Or, set channel_mask = 65533, (0xFFFD), and all channels except 1 will be 82 * ignored. 83 * 84 * The default is 0 (respond to all channels). Bit 0 and bits 17-32 of this 85 * parameter are unused. 86 * 87 */ 88 89 #include <linux/kernel.h> 90 #include <linux/errno.h> 91 #include <linux/init.h> 92 #include <linux/slab.h> 93 #include <linux/module.h> 94 #include <linux/mutex.h> 95 #include <linux/usb/input.h> 96 #include <linux/wait.h> 97 #include <linux/jiffies.h> 98 #include <media/rc-core.h> 99 100 /* 101 * Module and Version Information, Module Parameters 102 */ 103 104 #define ATI_REMOTE_VENDOR_ID 0x0bc7 105 #define LOLA_REMOTE_PRODUCT_ID 0x0002 106 #define LOLA2_REMOTE_PRODUCT_ID 0x0003 107 #define ATI_REMOTE_PRODUCT_ID 0x0004 108 #define NVIDIA_REMOTE_PRODUCT_ID 0x0005 109 #define MEDION_REMOTE_PRODUCT_ID 0x0006 110 #define FIREFLY_REMOTE_PRODUCT_ID 0x0008 111 112 #define DRIVER_VERSION "2.2.1" 113 #define DRIVER_AUTHOR "Torrey Hoffman <thoffman@arnor.net>" 114 #define DRIVER_DESC "ATI/X10 RF USB Remote Control" 115 116 #define NAME_BUFSIZE 80 /* size of product name, path buffers */ 117 #define DATA_BUFSIZE 63 /* size of URB data buffers */ 118 119 /* 120 * Duplicate event filtering time. 121 * Sequential, identical KIND_FILTERED inputs with less than 122 * FILTER_TIME milliseconds between them are considered as repeat 123 * events. The hardware generates 5 events for the first keypress 124 * and we have to take this into account for an accurate repeat 125 * behaviour. 126 */ 127 #define FILTER_TIME 60 /* msec */ 128 #define REPEAT_DELAY 500 /* msec */ 129 130 static unsigned long channel_mask; 131 module_param(channel_mask, ulong, 0644); 132 MODULE_PARM_DESC(channel_mask, "Bitmask of remote control channels to ignore"); 133 134 static int debug; 135 module_param(debug, int, 0644); 136 MODULE_PARM_DESC(debug, "Enable extra debug messages and information"); 137 138 static int repeat_filter = FILTER_TIME; 139 module_param(repeat_filter, int, 0644); 140 MODULE_PARM_DESC(repeat_filter, "Repeat filter time, default = 60 msec"); 141 142 static int repeat_delay = REPEAT_DELAY; 143 module_param(repeat_delay, int, 0644); 144 MODULE_PARM_DESC(repeat_delay, "Delay before sending repeats, default = 500 msec"); 145 146 static bool mouse = true; 147 module_param(mouse, bool, 0444); 148 MODULE_PARM_DESC(mouse, "Enable mouse device, default = yes"); 149 150 #define dbginfo(dev, format, arg...) \ 151 do { if (debug) dev_info(dev , format , ## arg); } while (0) 152 #undef err 153 #define err(format, arg...) printk(KERN_ERR format , ## arg) 154 155 struct ati_receiver_type { 156 /* either default_keymap or get_default_keymap should be set */ 157 const char *default_keymap; 158 const char *(*get_default_keymap)(struct usb_interface *interface); 159 }; 160 161 static const char *get_medion_keymap(struct usb_interface *interface) 162 { 163 struct usb_device *udev = interface_to_usbdev(interface); 164 165 /* 166 * There are many different Medion remotes shipped with a receiver 167 * with the same usb id, but the receivers have subtle differences 168 * in the USB descriptors allowing us to detect them. 169 */ 170 171 if (udev->manufacturer && udev->product) { 172 if (udev->actconfig->desc.bmAttributes & USB_CONFIG_ATT_WAKEUP) { 173 174 if (!strcmp(udev->manufacturer, "X10 Wireless Technology Inc") 175 && !strcmp(udev->product, "USB Receiver")) 176 return RC_MAP_MEDION_X10_DIGITAINER; 177 178 if (!strcmp(udev->manufacturer, "X10 WTI") 179 && !strcmp(udev->product, "RF receiver")) 180 return RC_MAP_MEDION_X10_OR2X; 181 } else { 182 183 if (!strcmp(udev->manufacturer, "X10 Wireless Technology Inc") 184 && !strcmp(udev->product, "USB Receiver")) 185 return RC_MAP_MEDION_X10; 186 } 187 } 188 189 dev_info(&interface->dev, 190 "Unknown Medion X10 receiver, using default ati_remote Medion keymap\n"); 191 192 return RC_MAP_MEDION_X10; 193 } 194 195 static const struct ati_receiver_type type_ati = { 196 .default_keymap = RC_MAP_ATI_X10 197 }; 198 static const struct ati_receiver_type type_medion = { 199 .get_default_keymap = get_medion_keymap 200 }; 201 static const struct ati_receiver_type type_firefly = { 202 .default_keymap = RC_MAP_SNAPSTREAM_FIREFLY 203 }; 204 205 static struct usb_device_id ati_remote_table[] = { 206 { 207 USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID), 208 .driver_info = (unsigned long)&type_ati 209 }, 210 { 211 USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA2_REMOTE_PRODUCT_ID), 212 .driver_info = (unsigned long)&type_ati 213 }, 214 { 215 USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID), 216 .driver_info = (unsigned long)&type_ati 217 }, 218 { 219 USB_DEVICE(ATI_REMOTE_VENDOR_ID, NVIDIA_REMOTE_PRODUCT_ID), 220 .driver_info = (unsigned long)&type_ati 221 }, 222 { 223 USB_DEVICE(ATI_REMOTE_VENDOR_ID, MEDION_REMOTE_PRODUCT_ID), 224 .driver_info = (unsigned long)&type_medion 225 }, 226 { 227 USB_DEVICE(ATI_REMOTE_VENDOR_ID, FIREFLY_REMOTE_PRODUCT_ID), 228 .driver_info = (unsigned long)&type_firefly 229 }, 230 {} /* Terminating entry */ 231 }; 232 233 MODULE_DEVICE_TABLE(usb, ati_remote_table); 234 235 /* Get hi and low bytes of a 16-bits int */ 236 #define HI(a) ((unsigned char)((a) >> 8)) 237 #define LO(a) ((unsigned char)((a) & 0xff)) 238 239 #define SEND_FLAG_IN_PROGRESS 1 240 #define SEND_FLAG_COMPLETE 2 241 242 /* Device initialization strings */ 243 static char init1[] = { 0x01, 0x00, 0x20, 0x14 }; 244 static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 }; 245 246 struct ati_remote { 247 struct input_dev *idev; 248 struct rc_dev *rdev; 249 struct usb_device *udev; 250 struct usb_interface *interface; 251 252 struct urb *irq_urb; 253 struct urb *out_urb; 254 struct usb_endpoint_descriptor *endpoint_in; 255 struct usb_endpoint_descriptor *endpoint_out; 256 unsigned char *inbuf; 257 unsigned char *outbuf; 258 dma_addr_t inbuf_dma; 259 dma_addr_t outbuf_dma; 260 261 unsigned char old_data; /* Detect duplicate events */ 262 unsigned long old_jiffies; 263 unsigned long acc_jiffies; /* handle acceleration */ 264 unsigned long first_jiffies; 265 266 unsigned int repeat_count; 267 268 char rc_name[NAME_BUFSIZE]; 269 char rc_phys[NAME_BUFSIZE]; 270 char mouse_name[NAME_BUFSIZE]; 271 char mouse_phys[NAME_BUFSIZE]; 272 273 wait_queue_head_t wait; 274 int send_flags; 275 276 int users; /* 0-2, users are rc and input */ 277 struct mutex open_mutex; 278 }; 279 280 /* "Kinds" of messages sent from the hardware to the driver. */ 281 #define KIND_END 0 282 #define KIND_LITERAL 1 /* Simply pass to input system */ 283 #define KIND_FILTERED 2 /* Add artificial key-up events, drop keyrepeats */ 284 #define KIND_LU 3 /* Directional keypad diagonals - left up, */ 285 #define KIND_RU 4 /* right up, */ 286 #define KIND_LD 5 /* left down, */ 287 #define KIND_RD 6 /* right down */ 288 #define KIND_ACCEL 7 /* Directional keypad - left, right, up, down.*/ 289 290 /* Translation table from hardware messages to input events. */ 291 static const struct { 292 short kind; 293 unsigned char data; 294 int type; 295 unsigned int code; 296 int value; 297 } ati_remote_tbl[] = { 298 /* Directional control pad axes */ 299 {KIND_ACCEL, 0x70, EV_REL, REL_X, -1}, /* left */ 300 {KIND_ACCEL, 0x71, EV_REL, REL_X, 1}, /* right */ 301 {KIND_ACCEL, 0x72, EV_REL, REL_Y, -1}, /* up */ 302 {KIND_ACCEL, 0x73, EV_REL, REL_Y, 1}, /* down */ 303 /* Directional control pad diagonals */ 304 {KIND_LU, 0x74, EV_REL, 0, 0}, /* left up */ 305 {KIND_RU, 0x75, EV_REL, 0, 0}, /* right up */ 306 {KIND_LD, 0x77, EV_REL, 0, 0}, /* left down */ 307 {KIND_RD, 0x76, EV_REL, 0, 0}, /* right down */ 308 309 /* "Mouse button" buttons */ 310 {KIND_LITERAL, 0x78, EV_KEY, BTN_LEFT, 1}, /* left btn down */ 311 {KIND_LITERAL, 0x79, EV_KEY, BTN_LEFT, 0}, /* left btn up */ 312 {KIND_LITERAL, 0x7c, EV_KEY, BTN_RIGHT, 1},/* right btn down */ 313 {KIND_LITERAL, 0x7d, EV_KEY, BTN_RIGHT, 0},/* right btn up */ 314 315 /* Artificial "doubleclick" events are generated by the hardware. 316 * They are mapped to the "side" and "extra" mouse buttons here. */ 317 {KIND_FILTERED, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */ 318 {KIND_FILTERED, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */ 319 320 /* Non-mouse events are handled by rc-core */ 321 {KIND_END, 0x00, EV_MAX + 1, 0, 0} 322 }; 323 324 /* 325 * ati_remote_dump_input 326 */ 327 static void ati_remote_dump(struct device *dev, unsigned char *data, 328 unsigned int len) 329 { 330 if (len == 1) { 331 if (data[0] != (unsigned char)0xff && data[0] != 0x00) 332 dev_warn(dev, "Weird byte 0x%02x\n", data[0]); 333 } else if (len == 4) 334 dev_warn(dev, "Weird key %*ph\n", 4, data); 335 else 336 dev_warn(dev, "Weird data, len=%d %*ph ...\n", len, 6, data); 337 } 338 339 /* 340 * ati_remote_open 341 */ 342 static int ati_remote_open(struct ati_remote *ati_remote) 343 { 344 int err = 0; 345 346 mutex_lock(&ati_remote->open_mutex); 347 348 if (ati_remote->users++ != 0) 349 goto out; /* one was already active */ 350 351 /* On first open, submit the read urb which was set up previously. */ 352 ati_remote->irq_urb->dev = ati_remote->udev; 353 if (usb_submit_urb(ati_remote->irq_urb, GFP_KERNEL)) { 354 dev_err(&ati_remote->interface->dev, 355 "%s: usb_submit_urb failed!\n", __func__); 356 err = -EIO; 357 } 358 359 out: mutex_unlock(&ati_remote->open_mutex); 360 return err; 361 } 362 363 /* 364 * ati_remote_close 365 */ 366 static void ati_remote_close(struct ati_remote *ati_remote) 367 { 368 mutex_lock(&ati_remote->open_mutex); 369 if (--ati_remote->users == 0) 370 usb_kill_urb(ati_remote->irq_urb); 371 mutex_unlock(&ati_remote->open_mutex); 372 } 373 374 static int ati_remote_input_open(struct input_dev *inputdev) 375 { 376 struct ati_remote *ati_remote = input_get_drvdata(inputdev); 377 return ati_remote_open(ati_remote); 378 } 379 380 static void ati_remote_input_close(struct input_dev *inputdev) 381 { 382 struct ati_remote *ati_remote = input_get_drvdata(inputdev); 383 ati_remote_close(ati_remote); 384 } 385 386 static int ati_remote_rc_open(struct rc_dev *rdev) 387 { 388 struct ati_remote *ati_remote = rdev->priv; 389 return ati_remote_open(ati_remote); 390 } 391 392 static void ati_remote_rc_close(struct rc_dev *rdev) 393 { 394 struct ati_remote *ati_remote = rdev->priv; 395 ati_remote_close(ati_remote); 396 } 397 398 /* 399 * ati_remote_irq_out 400 */ 401 static void ati_remote_irq_out(struct urb *urb) 402 { 403 struct ati_remote *ati_remote = urb->context; 404 405 if (urb->status) { 406 dev_dbg(&ati_remote->interface->dev, "%s: status %d\n", 407 __func__, urb->status); 408 return; 409 } 410 411 ati_remote->send_flags |= SEND_FLAG_COMPLETE; 412 wmb(); 413 wake_up(&ati_remote->wait); 414 } 415 416 /* 417 * ati_remote_sendpacket 418 * 419 * Used to send device initialization strings 420 */ 421 static int ati_remote_sendpacket(struct ati_remote *ati_remote, u16 cmd, 422 unsigned char *data) 423 { 424 int retval = 0; 425 426 /* Set up out_urb */ 427 memcpy(ati_remote->out_urb->transfer_buffer + 1, data, LO(cmd)); 428 ((char *) ati_remote->out_urb->transfer_buffer)[0] = HI(cmd); 429 430 ati_remote->out_urb->transfer_buffer_length = LO(cmd) + 1; 431 ati_remote->out_urb->dev = ati_remote->udev; 432 ati_remote->send_flags = SEND_FLAG_IN_PROGRESS; 433 434 retval = usb_submit_urb(ati_remote->out_urb, GFP_ATOMIC); 435 if (retval) { 436 dev_dbg(&ati_remote->interface->dev, 437 "sendpacket: usb_submit_urb failed: %d\n", retval); 438 return retval; 439 } 440 441 wait_event_timeout(ati_remote->wait, 442 ((ati_remote->out_urb->status != -EINPROGRESS) || 443 (ati_remote->send_flags & SEND_FLAG_COMPLETE)), 444 HZ); 445 usb_kill_urb(ati_remote->out_urb); 446 447 return retval; 448 } 449 450 /* 451 * ati_remote_compute_accel 452 * 453 * Implements acceleration curve for directional control pad 454 * If elapsed time since last event is > 1/4 second, user "stopped", 455 * so reset acceleration. Otherwise, user is probably holding the control 456 * pad down, so we increase acceleration, ramping up over two seconds to 457 * a maximum speed. 458 */ 459 static int ati_remote_compute_accel(struct ati_remote *ati_remote) 460 { 461 static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 }; 462 unsigned long now = jiffies; 463 int acc; 464 465 if (time_after(now, ati_remote->old_jiffies + msecs_to_jiffies(250))) { 466 acc = 1; 467 ati_remote->acc_jiffies = now; 468 } 469 else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(125))) 470 acc = accel[0]; 471 else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(250))) 472 acc = accel[1]; 473 else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(500))) 474 acc = accel[2]; 475 else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1000))) 476 acc = accel[3]; 477 else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1500))) 478 acc = accel[4]; 479 else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(2000))) 480 acc = accel[5]; 481 else 482 acc = accel[6]; 483 484 return acc; 485 } 486 487 /* 488 * ati_remote_report_input 489 */ 490 static void ati_remote_input_report(struct urb *urb) 491 { 492 struct ati_remote *ati_remote = urb->context; 493 unsigned char *data= ati_remote->inbuf; 494 struct input_dev *dev = ati_remote->idev; 495 int index = -1; 496 int acc; 497 int remote_num; 498 unsigned char scancode; 499 u32 wheel_keycode = KEY_RESERVED; 500 int i; 501 502 /* 503 * data[0] = 0x14 504 * data[1] = data[2] + data[3] + 0xd5 (a checksum byte) 505 * data[2] = the key code (with toggle bit in MSB with some models) 506 * data[3] = channel << 4 (the low 4 bits must be zero) 507 */ 508 509 /* Deal with strange looking inputs */ 510 if ( (urb->actual_length != 4) || (data[0] != 0x14) || 511 ((data[3] & 0x0f) != 0x00) ) { 512 ati_remote_dump(&urb->dev->dev, data, urb->actual_length); 513 return; 514 } 515 516 if (data[1] != ((data[2] + data[3] + 0xd5) & 0xff)) { 517 dbginfo(&ati_remote->interface->dev, 518 "wrong checksum in input: %*ph\n", 4, data); 519 return; 520 } 521 522 /* Mask unwanted remote channels. */ 523 /* note: remote_num is 0-based, channel 1 on remote == 0 here */ 524 remote_num = (data[3] >> 4) & 0x0f; 525 if (channel_mask & (1 << (remote_num + 1))) { 526 dbginfo(&ati_remote->interface->dev, 527 "Masked input from channel 0x%02x: data %02x,%02x, " 528 "mask= 0x%02lx\n", 529 remote_num, data[1], data[2], channel_mask); 530 return; 531 } 532 533 /* 534 * MSB is a toggle code, though only used by some devices 535 * (e.g. SnapStream Firefly) 536 */ 537 scancode = data[2] & 0x7f; 538 539 dbginfo(&ati_remote->interface->dev, 540 "channel 0x%02x; key data %02x, scancode %02x\n", 541 remote_num, data[2], scancode); 542 543 if (scancode >= 0x70) { 544 /* 545 * This is either a mouse or scrollwheel event, depending on 546 * the remote/keymap. 547 * Get the keycode assigned to scancode 0x78/0x70. If it is 548 * set, assume this is a scrollwheel up/down event. 549 */ 550 wheel_keycode = rc_g_keycode_from_table(ati_remote->rdev, 551 scancode & 0x78); 552 553 if (wheel_keycode == KEY_RESERVED) { 554 /* scrollwheel was not mapped, assume mouse */ 555 556 /* Look up event code index in the mouse translation 557 * table. 558 */ 559 for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) { 560 if (scancode == ati_remote_tbl[i].data) { 561 index = i; 562 break; 563 } 564 } 565 } 566 } 567 568 if (index >= 0 && ati_remote_tbl[index].kind == KIND_LITERAL) { 569 input_event(dev, ati_remote_tbl[index].type, 570 ati_remote_tbl[index].code, 571 ati_remote_tbl[index].value); 572 input_sync(dev); 573 574 ati_remote->old_jiffies = jiffies; 575 return; 576 } 577 578 if (index < 0 || ati_remote_tbl[index].kind == KIND_FILTERED) { 579 unsigned long now = jiffies; 580 581 /* Filter duplicate events which happen "too close" together. */ 582 if (ati_remote->old_data == data[2] && 583 time_before(now, ati_remote->old_jiffies + 584 msecs_to_jiffies(repeat_filter))) { 585 ati_remote->repeat_count++; 586 } else { 587 ati_remote->repeat_count = 0; 588 ati_remote->first_jiffies = now; 589 } 590 591 ati_remote->old_data = data[2]; 592 ati_remote->old_jiffies = now; 593 594 /* Ensure we skip at least the 4 first duplicate events (generated 595 * by a single keypress), and continue skipping until repeat_delay 596 * msecs have passed 597 */ 598 if (ati_remote->repeat_count > 0 && 599 (ati_remote->repeat_count < 5 || 600 time_before(now, ati_remote->first_jiffies + 601 msecs_to_jiffies(repeat_delay)))) 602 return; 603 604 if (index < 0) { 605 /* Not a mouse event, hand it to rc-core. */ 606 int count = 1; 607 608 if (wheel_keycode != KEY_RESERVED) { 609 /* 610 * This is a scrollwheel event, send the 611 * scroll up (0x78) / down (0x70) scancode 612 * repeatedly as many times as indicated by 613 * rest of the scancode. 614 */ 615 count = (scancode & 0x07) + 1; 616 scancode &= 0x78; 617 } 618 619 while (count--) { 620 /* 621 * We don't use the rc-core repeat handling yet as 622 * it would cause ghost repeats which would be a 623 * regression for this driver. 624 */ 625 rc_keydown_notimeout(ati_remote->rdev, scancode, 626 data[2]); 627 rc_keyup(ati_remote->rdev); 628 } 629 return; 630 } 631 632 input_event(dev, ati_remote_tbl[index].type, 633 ati_remote_tbl[index].code, 1); 634 input_sync(dev); 635 input_event(dev, ati_remote_tbl[index].type, 636 ati_remote_tbl[index].code, 0); 637 input_sync(dev); 638 639 } else { 640 641 /* 642 * Other event kinds are from the directional control pad, and 643 * have an acceleration factor applied to them. Without this 644 * acceleration, the control pad is mostly unusable. 645 */ 646 acc = ati_remote_compute_accel(ati_remote); 647 648 switch (ati_remote_tbl[index].kind) { 649 case KIND_ACCEL: 650 input_event(dev, ati_remote_tbl[index].type, 651 ati_remote_tbl[index].code, 652 ati_remote_tbl[index].value * acc); 653 break; 654 case KIND_LU: 655 input_report_rel(dev, REL_X, -acc); 656 input_report_rel(dev, REL_Y, -acc); 657 break; 658 case KIND_RU: 659 input_report_rel(dev, REL_X, acc); 660 input_report_rel(dev, REL_Y, -acc); 661 break; 662 case KIND_LD: 663 input_report_rel(dev, REL_X, -acc); 664 input_report_rel(dev, REL_Y, acc); 665 break; 666 case KIND_RD: 667 input_report_rel(dev, REL_X, acc); 668 input_report_rel(dev, REL_Y, acc); 669 break; 670 default: 671 dev_dbg(&ati_remote->interface->dev, 672 "ati_remote kind=%d\n", 673 ati_remote_tbl[index].kind); 674 } 675 input_sync(dev); 676 677 ati_remote->old_jiffies = jiffies; 678 ati_remote->old_data = data[2]; 679 } 680 } 681 682 /* 683 * ati_remote_irq_in 684 */ 685 static void ati_remote_irq_in(struct urb *urb) 686 { 687 struct ati_remote *ati_remote = urb->context; 688 int retval; 689 690 switch (urb->status) { 691 case 0: /* success */ 692 ati_remote_input_report(urb); 693 break; 694 case -ECONNRESET: /* unlink */ 695 case -ENOENT: 696 case -ESHUTDOWN: 697 dev_dbg(&ati_remote->interface->dev, 698 "%s: urb error status, unlink?\n", 699 __func__); 700 return; 701 default: /* error */ 702 dev_dbg(&ati_remote->interface->dev, 703 "%s: Nonzero urb status %d\n", 704 __func__, urb->status); 705 } 706 707 retval = usb_submit_urb(urb, GFP_ATOMIC); 708 if (retval) 709 dev_err(&ati_remote->interface->dev, 710 "%s: usb_submit_urb()=%d\n", 711 __func__, retval); 712 } 713 714 /* 715 * ati_remote_alloc_buffers 716 */ 717 static int ati_remote_alloc_buffers(struct usb_device *udev, 718 struct ati_remote *ati_remote) 719 { 720 ati_remote->inbuf = usb_alloc_coherent(udev, DATA_BUFSIZE, GFP_ATOMIC, 721 &ati_remote->inbuf_dma); 722 if (!ati_remote->inbuf) 723 return -1; 724 725 ati_remote->outbuf = usb_alloc_coherent(udev, DATA_BUFSIZE, GFP_ATOMIC, 726 &ati_remote->outbuf_dma); 727 if (!ati_remote->outbuf) 728 return -1; 729 730 ati_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL); 731 if (!ati_remote->irq_urb) 732 return -1; 733 734 ati_remote->out_urb = usb_alloc_urb(0, GFP_KERNEL); 735 if (!ati_remote->out_urb) 736 return -1; 737 738 return 0; 739 } 740 741 /* 742 * ati_remote_free_buffers 743 */ 744 static void ati_remote_free_buffers(struct ati_remote *ati_remote) 745 { 746 usb_free_urb(ati_remote->irq_urb); 747 usb_free_urb(ati_remote->out_urb); 748 749 usb_free_coherent(ati_remote->udev, DATA_BUFSIZE, 750 ati_remote->inbuf, ati_remote->inbuf_dma); 751 752 usb_free_coherent(ati_remote->udev, DATA_BUFSIZE, 753 ati_remote->outbuf, ati_remote->outbuf_dma); 754 } 755 756 static void ati_remote_input_init(struct ati_remote *ati_remote) 757 { 758 struct input_dev *idev = ati_remote->idev; 759 int i; 760 761 idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); 762 idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) | 763 BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_SIDE) | BIT_MASK(BTN_EXTRA); 764 idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y); 765 for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) 766 if (ati_remote_tbl[i].type == EV_KEY) 767 set_bit(ati_remote_tbl[i].code, idev->keybit); 768 769 input_set_drvdata(idev, ati_remote); 770 771 idev->open = ati_remote_input_open; 772 idev->close = ati_remote_input_close; 773 774 idev->name = ati_remote->mouse_name; 775 idev->phys = ati_remote->mouse_phys; 776 777 usb_to_input_id(ati_remote->udev, &idev->id); 778 idev->dev.parent = &ati_remote->interface->dev; 779 } 780 781 static void ati_remote_rc_init(struct ati_remote *ati_remote) 782 { 783 struct rc_dev *rdev = ati_remote->rdev; 784 785 rdev->priv = ati_remote; 786 rdev->driver_type = RC_DRIVER_SCANCODE; 787 rdev->allowed_protos = RC_BIT_OTHER; 788 rdev->driver_name = "ati_remote"; 789 790 rdev->open = ati_remote_rc_open; 791 rdev->close = ati_remote_rc_close; 792 793 rdev->input_name = ati_remote->rc_name; 794 rdev->input_phys = ati_remote->rc_phys; 795 796 usb_to_input_id(ati_remote->udev, &rdev->input_id); 797 rdev->dev.parent = &ati_remote->interface->dev; 798 } 799 800 static int ati_remote_initialize(struct ati_remote *ati_remote) 801 { 802 struct usb_device *udev = ati_remote->udev; 803 int pipe, maxp; 804 805 init_waitqueue_head(&ati_remote->wait); 806 807 /* Set up irq_urb */ 808 pipe = usb_rcvintpipe(udev, ati_remote->endpoint_in->bEndpointAddress); 809 maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); 810 maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp; 811 812 usb_fill_int_urb(ati_remote->irq_urb, udev, pipe, ati_remote->inbuf, 813 maxp, ati_remote_irq_in, ati_remote, 814 ati_remote->endpoint_in->bInterval); 815 ati_remote->irq_urb->transfer_dma = ati_remote->inbuf_dma; 816 ati_remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; 817 818 /* Set up out_urb */ 819 pipe = usb_sndintpipe(udev, ati_remote->endpoint_out->bEndpointAddress); 820 maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); 821 maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp; 822 823 usb_fill_int_urb(ati_remote->out_urb, udev, pipe, ati_remote->outbuf, 824 maxp, ati_remote_irq_out, ati_remote, 825 ati_remote->endpoint_out->bInterval); 826 ati_remote->out_urb->transfer_dma = ati_remote->outbuf_dma; 827 ati_remote->out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; 828 829 /* send initialization strings */ 830 if ((ati_remote_sendpacket(ati_remote, 0x8004, init1)) || 831 (ati_remote_sendpacket(ati_remote, 0x8007, init2))) { 832 dev_err(&ati_remote->interface->dev, 833 "Initializing ati_remote hardware failed.\n"); 834 return -EIO; 835 } 836 837 return 0; 838 } 839 840 /* 841 * ati_remote_probe 842 */ 843 static int ati_remote_probe(struct usb_interface *interface, 844 const struct usb_device_id *id) 845 { 846 struct usb_device *udev = interface_to_usbdev(interface); 847 struct usb_host_interface *iface_host = interface->cur_altsetting; 848 struct usb_endpoint_descriptor *endpoint_in, *endpoint_out; 849 struct ati_receiver_type *type = (struct ati_receiver_type *)id->driver_info; 850 struct ati_remote *ati_remote; 851 struct input_dev *input_dev; 852 struct rc_dev *rc_dev; 853 int err = -ENOMEM; 854 855 if (iface_host->desc.bNumEndpoints != 2) { 856 err("%s: Unexpected desc.bNumEndpoints\n", __func__); 857 return -ENODEV; 858 } 859 860 endpoint_in = &iface_host->endpoint[0].desc; 861 endpoint_out = &iface_host->endpoint[1].desc; 862 863 if (!usb_endpoint_is_int_in(endpoint_in)) { 864 err("%s: Unexpected endpoint_in\n", __func__); 865 return -ENODEV; 866 } 867 if (le16_to_cpu(endpoint_in->wMaxPacketSize) == 0) { 868 err("%s: endpoint_in message size==0? \n", __func__); 869 return -ENODEV; 870 } 871 872 ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL); 873 rc_dev = rc_allocate_device(); 874 if (!ati_remote || !rc_dev) 875 goto exit_free_dev_rdev; 876 877 /* Allocate URB buffers, URBs */ 878 if (ati_remote_alloc_buffers(udev, ati_remote)) 879 goto exit_free_buffers; 880 881 ati_remote->endpoint_in = endpoint_in; 882 ati_remote->endpoint_out = endpoint_out; 883 ati_remote->udev = udev; 884 ati_remote->rdev = rc_dev; 885 ati_remote->interface = interface; 886 887 usb_make_path(udev, ati_remote->rc_phys, sizeof(ati_remote->rc_phys)); 888 strlcpy(ati_remote->mouse_phys, ati_remote->rc_phys, 889 sizeof(ati_remote->mouse_phys)); 890 891 strlcat(ati_remote->rc_phys, "/input0", sizeof(ati_remote->rc_phys)); 892 strlcat(ati_remote->mouse_phys, "/input1", sizeof(ati_remote->mouse_phys)); 893 894 if (udev->manufacturer) 895 strlcpy(ati_remote->rc_name, udev->manufacturer, 896 sizeof(ati_remote->rc_name)); 897 898 if (udev->product) 899 snprintf(ati_remote->rc_name, sizeof(ati_remote->rc_name), 900 "%s %s", ati_remote->rc_name, udev->product); 901 902 if (!strlen(ati_remote->rc_name)) 903 snprintf(ati_remote->rc_name, sizeof(ati_remote->rc_name), 904 DRIVER_DESC "(%04x,%04x)", 905 le16_to_cpu(ati_remote->udev->descriptor.idVendor), 906 le16_to_cpu(ati_remote->udev->descriptor.idProduct)); 907 908 snprintf(ati_remote->mouse_name, sizeof(ati_remote->mouse_name), 909 "%s mouse", ati_remote->rc_name); 910 911 rc_dev->map_name = RC_MAP_ATI_X10; /* default map */ 912 913 /* set default keymap according to receiver model */ 914 if (type) { 915 if (type->default_keymap) 916 rc_dev->map_name = type->default_keymap; 917 else if (type->get_default_keymap) 918 rc_dev->map_name = type->get_default_keymap(interface); 919 } 920 921 ati_remote_rc_init(ati_remote); 922 mutex_init(&ati_remote->open_mutex); 923 924 /* Device Hardware Initialization - fills in ati_remote->idev from udev. */ 925 err = ati_remote_initialize(ati_remote); 926 if (err) 927 goto exit_kill_urbs; 928 929 /* Set up and register rc device */ 930 err = rc_register_device(ati_remote->rdev); 931 if (err) 932 goto exit_kill_urbs; 933 934 /* use our delay for rc_dev */ 935 ati_remote->rdev->input_dev->rep[REP_DELAY] = repeat_delay; 936 937 /* Set up and register mouse input device */ 938 if (mouse) { 939 input_dev = input_allocate_device(); 940 if (!input_dev) { 941 err = -ENOMEM; 942 goto exit_unregister_device; 943 } 944 945 ati_remote->idev = input_dev; 946 ati_remote_input_init(ati_remote); 947 err = input_register_device(input_dev); 948 949 if (err) 950 goto exit_free_input_device; 951 } 952 953 usb_set_intfdata(interface, ati_remote); 954 return 0; 955 956 exit_free_input_device: 957 input_free_device(input_dev); 958 exit_unregister_device: 959 rc_unregister_device(rc_dev); 960 rc_dev = NULL; 961 exit_kill_urbs: 962 usb_kill_urb(ati_remote->irq_urb); 963 usb_kill_urb(ati_remote->out_urb); 964 exit_free_buffers: 965 ati_remote_free_buffers(ati_remote); 966 exit_free_dev_rdev: 967 rc_free_device(rc_dev); 968 kfree(ati_remote); 969 return err; 970 } 971 972 /* 973 * ati_remote_disconnect 974 */ 975 static void ati_remote_disconnect(struct usb_interface *interface) 976 { 977 struct ati_remote *ati_remote; 978 979 ati_remote = usb_get_intfdata(interface); 980 usb_set_intfdata(interface, NULL); 981 if (!ati_remote) { 982 dev_warn(&interface->dev, "%s - null device?\n", __func__); 983 return; 984 } 985 986 usb_kill_urb(ati_remote->irq_urb); 987 usb_kill_urb(ati_remote->out_urb); 988 if (ati_remote->idev) 989 input_unregister_device(ati_remote->idev); 990 rc_unregister_device(ati_remote->rdev); 991 ati_remote_free_buffers(ati_remote); 992 kfree(ati_remote); 993 } 994 995 /* usb specific object to register with the usb subsystem */ 996 static struct usb_driver ati_remote_driver = { 997 .name = "ati_remote", 998 .probe = ati_remote_probe, 999 .disconnect = ati_remote_disconnect, 1000 .id_table = ati_remote_table, 1001 }; 1002 1003 module_usb_driver(ati_remote_driver); 1004 1005 MODULE_AUTHOR(DRIVER_AUTHOR); 1006 MODULE_DESCRIPTION(DRIVER_DESC); 1007 MODULE_LICENSE("GPL"); 1008