1config RC_CORE 2 tristate 3 depends on MEDIA_RC_SUPPORT 4 depends on INPUT 5 default y 6 7source "drivers/media/rc/keymaps/Kconfig" 8 9menuconfig RC_DECODERS 10 bool "Remote controller decoders" 11 depends on RC_CORE 12 default y 13 14if RC_DECODERS 15config LIRC 16 tristate "LIRC interface driver" 17 depends on RC_CORE 18 19 ---help--- 20 Enable this option to build the Linux Infrared Remote 21 Control (LIRC) core device interface driver. The LIRC 22 interface passes raw IR to and from userspace, where the 23 LIRC daemon handles protocol decoding for IR reception and 24 encoding for IR transmitting (aka "blasting"). 25 26config IR_LIRC_CODEC 27 tristate "Enable IR to LIRC bridge" 28 depends on RC_CORE 29 depends on LIRC 30 default y 31 32 ---help--- 33 Enable this option to pass raw IR to and from userspace via 34 the LIRC interface. 35 36 37config IR_NEC_DECODER 38 tristate "Enable IR raw decoder for the NEC protocol" 39 depends on RC_CORE 40 select BITREVERSE 41 default y 42 43 ---help--- 44 Enable this option if you have IR with NEC protocol, and 45 if the IR is decoded in software 46 47config IR_RC5_DECODER 48 tristate "Enable IR raw decoder for the RC-5 protocol" 49 depends on RC_CORE 50 select BITREVERSE 51 default y 52 53 ---help--- 54 Enable this option if you have IR with RC-5 protocol, and 55 if the IR is decoded in software 56 57config IR_RC6_DECODER 58 tristate "Enable IR raw decoder for the RC6 protocol" 59 depends on RC_CORE 60 select BITREVERSE 61 default y 62 63 ---help--- 64 Enable this option if you have an infrared remote control which 65 uses the RC6 protocol, and you need software decoding support. 66 67config IR_JVC_DECODER 68 tristate "Enable IR raw decoder for the JVC protocol" 69 depends on RC_CORE 70 select BITREVERSE 71 default y 72 73 ---help--- 74 Enable this option if you have an infrared remote control which 75 uses the JVC protocol, and you need software decoding support. 76 77config IR_SONY_DECODER 78 tristate "Enable IR raw decoder for the Sony protocol" 79 depends on RC_CORE 80 select BITREVERSE 81 default y 82 83 ---help--- 84 Enable this option if you have an infrared remote control which 85 uses the Sony protocol, and you need software decoding support. 86 87config IR_SANYO_DECODER 88 tristate "Enable IR raw decoder for the Sanyo protocol" 89 depends on RC_CORE 90 default y 91 92 ---help--- 93 Enable this option if you have an infrared remote control which 94 uses the Sanyo protocol (Sanyo, Aiwa, Chinon remotes), 95 and you need software decoding support. 96 97config IR_SHARP_DECODER 98 tristate "Enable IR raw decoder for the Sharp protocol" 99 depends on RC_CORE 100 default y 101 102 ---help--- 103 Enable this option if you have an infrared remote control which 104 uses the Sharp protocol, and you need software decoding support. 105 106config IR_MCE_KBD_DECODER 107 tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol" 108 depends on RC_CORE 109 select BITREVERSE 110 default y 111 112 ---help--- 113 Enable this option if you have a Microsoft Remote Keyboard for 114 Windows Media Center Edition, which you would like to use with 115 a raw IR receiver in your system. 116 117config IR_XMP_DECODER 118 tristate "Enable IR raw decoder for the XMP protocol" 119 depends on RC_CORE 120 select BITREVERSE 121 default y 122 123 ---help--- 124 Enable this option if you have IR with XMP protocol, and 125 if the IR is decoded in software 126endif #RC_DECODERS 127 128menuconfig RC_DEVICES 129 bool "Remote Controller devices" 130 depends on RC_CORE 131 132if RC_DEVICES 133 134config RC_ATI_REMOTE 135 tristate "ATI / X10 based USB RF remote controls" 136 depends on USB_ARCH_HAS_HCD 137 depends on RC_CORE 138 select USB 139 help 140 Say Y here if you want to use an X10 based USB remote control. 141 These are RF remotes with USB receivers. 142 143 Such devices include the ATI remote that comes with many of ATI's 144 All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote, 145 Medion RF remote, and SnapStream FireFly remote. 146 147 This driver provides mouse pointer, left and right mouse buttons, 148 and maps all the other remote buttons to keypress events. 149 150 To compile this driver as a module, choose M here: the module will be 151 called ati_remote. 152 153config IR_ENE 154 tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)" 155 depends on PNP 156 depends on RC_CORE 157 ---help--- 158 Say Y here to enable support for integrated infrared receiver 159 /transceiver made by ENE. 160 161 You can see if you have it by looking at lspnp output. 162 Output should include ENE0100 ENE0200 or something similar. 163 164 To compile this driver as a module, choose M here: the 165 module will be called ene_ir. 166 167config IR_HIX5HD2 168 tristate "Hisilicon hix5hd2 IR remote control" 169 depends on RC_CORE 170 help 171 Say Y here if you want to use hisilicon hix5hd2 remote control. 172 To compile this driver as a module, choose M here: the module will be 173 called ir-hix5hd2. 174 175 If you're not sure, select N here 176 177config IR_IMON 178 tristate "SoundGraph iMON Receiver and Display" 179 depends on USB_ARCH_HAS_HCD 180 depends on RC_CORE 181 select USB 182 ---help--- 183 Say Y here if you want to use a SoundGraph iMON (aka Antec Veris) 184 IR Receiver and/or LCD/VFD/VGA display. 185 186 To compile this driver as a module, choose M here: the 187 module will be called imon. 188 189config IR_MCEUSB 190 tristate "Windows Media Center Ed. eHome Infrared Transceiver" 191 depends on USB_ARCH_HAS_HCD 192 depends on RC_CORE 193 select USB 194 ---help--- 195 Say Y here if you want to use a Windows Media Center Edition 196 eHome Infrared Transceiver. 197 198 To compile this driver as a module, choose M here: the 199 module will be called mceusb. 200 201config IR_ITE_CIR 202 tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver" 203 depends on PNP 204 depends on RC_CORE 205 ---help--- 206 Say Y here to enable support for integrated infrared receivers 207 /transceivers made by ITE Tech Inc. These are found in 208 several ASUS devices, like the ASUS Digimatrix or the ASUS 209 EEEBox 1501U. 210 211 To compile this driver as a module, choose M here: the 212 module will be called ite-cir. 213 214config IR_FINTEK 215 tristate "Fintek Consumer Infrared Transceiver" 216 depends on PNP 217 depends on RC_CORE 218 ---help--- 219 Say Y here to enable support for integrated infrared receiver 220 /transciever made by Fintek. This chip is found on assorted 221 Jetway motherboards (and of course, possibly others). 222 223 To compile this driver as a module, choose M here: the 224 module will be called fintek-cir. 225 226config IR_NUVOTON 227 tristate "Nuvoton w836x7hg Consumer Infrared Transceiver" 228 depends on PNP 229 depends on RC_CORE 230 ---help--- 231 Say Y here to enable support for integrated infrared receiver 232 /transciever made by Nuvoton (formerly Winbond). This chip is 233 found in the ASRock ION 330HT, as well as assorted Intel 234 DP55-series motherboards (and of course, possibly others). 235 236 To compile this driver as a module, choose M here: the 237 module will be called nuvoton-cir. 238 239config IR_REDRAT3 240 tristate "RedRat3 IR Transceiver" 241 depends on USB_ARCH_HAS_HCD 242 depends on RC_CORE 243 select NEW_LEDS 244 select LEDS_CLASS 245 select USB 246 ---help--- 247 Say Y here if you want to use a RedRat3 Infrared Transceiver. 248 249 To compile this driver as a module, choose M here: the 250 module will be called redrat3. 251 252config IR_STREAMZAP 253 tristate "Streamzap PC Remote IR Receiver" 254 depends on USB_ARCH_HAS_HCD 255 depends on RC_CORE 256 select USB 257 ---help--- 258 Say Y here if you want to use a Streamzap PC Remote 259 Infrared Receiver. 260 261 To compile this driver as a module, choose M here: the 262 module will be called streamzap. 263 264config IR_WINBOND_CIR 265 tristate "Winbond IR remote control" 266 depends on X86 && PNP 267 depends on RC_CORE 268 select NEW_LEDS 269 select LEDS_CLASS 270 select BITREVERSE 271 ---help--- 272 Say Y here if you want to use the IR remote functionality found 273 in some Winbond SuperI/O chips. Currently only the WPCD376I 274 chip is supported (included in some Intel Media series 275 motherboards). 276 277 To compile this driver as a module, choose M here: the module will 278 be called winbond_cir. 279 280config IR_IGUANA 281 tristate "IguanaWorks USB IR Transceiver" 282 depends on USB_ARCH_HAS_HCD 283 depends on RC_CORE 284 select USB 285 ---help--- 286 Say Y here if you want to use the IguanaWorks USB IR Transceiver. 287 Both infrared receive and send are supported. If you want to 288 change the ID or the pin config, use the user space driver from 289 IguanaWorks. 290 291 Only firmware 0x0205 and later is supported. 292 293 To compile this driver as a module, choose M here: the module will 294 be called iguanair. 295 296config IR_TTUSBIR 297 tristate "TechnoTrend USB IR Receiver" 298 depends on USB_ARCH_HAS_HCD 299 depends on RC_CORE 300 select USB 301 select NEW_LEDS 302 select LEDS_CLASS 303 ---help--- 304 Say Y here if you want to use the TechnoTrend USB IR Receiver. The 305 driver can control the led. 306 307 To compile this driver as a module, choose M here: the module will 308 be called ttusbir. 309 310config IR_RX51 311 tristate "Nokia N900 IR transmitter diode" 312 depends on OMAP_DM_TIMER && ARCH_OMAP2PLUS && LIRC && !ARCH_MULTIPLATFORM 313 ---help--- 314 Say Y or M here if you want to enable support for the IR 315 transmitter diode built in the Nokia N900 (RX51) device. 316 317 The driver uses omap DM timers for generating the carrier 318 wave and pulses. 319 320source "drivers/media/rc/img-ir/Kconfig" 321 322config RC_LOOPBACK 323 tristate "Remote Control Loopback Driver" 324 depends on RC_CORE 325 ---help--- 326 Say Y here if you want support for the remote control loopback 327 driver which allows TX data to be sent back as RX data. 328 This is mostly useful for debugging purposes. 329 330 If you're not sure, select N here. 331 332 To compile this driver as a module, choose M here: the module will 333 be called rc_loopback. 334 335config IR_GPIO_CIR 336 tristate "GPIO IR remote control" 337 depends on RC_CORE 338 ---help--- 339 Say Y if you want to use GPIO based IR Receiver. 340 341 To compile this driver as a module, choose M here: the module will 342 be called gpio-ir-recv. 343 344config RC_ST 345 tristate "ST remote control receiver" 346 depends on RC_CORE 347 depends on ARCH_STI || COMPILE_TEST 348 help 349 Say Y here if you want support for ST remote control driver 350 which allows both IR and UHF RX. 351 The driver passes raw pulse and space information to the LIRC decoder. 352 353 If you're not sure, select N here. 354 355config IR_SUNXI 356 tristate "SUNXI IR remote control" 357 depends on RC_CORE 358 depends on ARCH_SUNXI || COMPILE_TEST 359 ---help--- 360 Say Y if you want to use sunXi internal IR Controller 361 362 To compile this driver as a module, choose M here: the module will 363 be called sunxi-ir. 364 365endif #RC_DEVICES 366