1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * GemTek radio card driver 4 * 5 * Copyright 1998 Jonas Munsin <jmunsin@iki.fi> 6 * 7 * GemTek hasn't released any specs on the card, so the protocol had to 8 * be reverse engineered with dosemu. 9 * 10 * Besides the protocol changes, this is mostly a copy of: 11 * 12 * RadioTrack II driver for Linux radio support (C) 1998 Ben Pfaff 13 * 14 * Based on RadioTrack I/RadioReveal (C) 1997 M. Kirkwood 15 * Converted to new API by Alan Cox <alan@lxorguk.ukuu.org.uk> 16 * Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org> 17 * 18 * Converted to the radio-isa framework by Hans Verkuil <hansverk@cisco.com> 19 * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@kernel.org> 20 * 21 * Note: this card seems to swap the left and right audio channels! 22 * 23 * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool. 24 */ 25 26 #include <linux/module.h> /* Modules */ 27 #include <linux/init.h> /* Initdata */ 28 #include <linux/ioport.h> /* request_region */ 29 #include <linux/delay.h> /* udelay */ 30 #include <linux/videodev2.h> /* kernel radio structs */ 31 #include <linux/mutex.h> 32 #include <linux/io.h> /* outb, outb_p */ 33 #include <linux/pnp.h> 34 #include <linux/slab.h> 35 #include <media/v4l2-ioctl.h> 36 #include <media/v4l2-device.h> 37 #include "radio-isa.h" 38 39 /* 40 * Module info. 41 */ 42 43 MODULE_AUTHOR("Jonas Munsin, Pekka Seppänen <pexu@kapsi.fi>"); 44 MODULE_DESCRIPTION("A driver for the GemTek Radio card."); 45 MODULE_LICENSE("GPL"); 46 MODULE_VERSION("1.0.0"); 47 48 /* 49 * Module params. 50 */ 51 52 #ifndef CONFIG_RADIO_GEMTEK_PORT 53 #define CONFIG_RADIO_GEMTEK_PORT -1 54 #endif 55 #ifndef CONFIG_RADIO_GEMTEK_PROBE 56 #define CONFIG_RADIO_GEMTEK_PROBE 1 57 #endif 58 59 #define GEMTEK_MAX 4 60 61 static bool probe = CONFIG_RADIO_GEMTEK_PROBE; 62 static bool hardmute; 63 static int io[GEMTEK_MAX] = { [0] = CONFIG_RADIO_GEMTEK_PORT, 64 [1 ... (GEMTEK_MAX - 1)] = -1 }; 65 static int radio_nr[GEMTEK_MAX] = { [0 ... (GEMTEK_MAX - 1)] = -1 }; 66 67 module_param(probe, bool, 0444); 68 MODULE_PARM_DESC(probe, "Enable automatic device probing."); 69 70 module_param(hardmute, bool, 0644); 71 MODULE_PARM_DESC(hardmute, "Enable 'hard muting' by shutting down PLL, may reduce static noise."); 72 73 module_param_array(io, int, NULL, 0444); 74 MODULE_PARM_DESC(io, "Force I/O ports for the GemTek Radio card if automatic probing is disabled or fails. The most common I/O ports are: 0x20c 0x30c, 0x24c or 0x34c (0x20c, 0x248 and 0x28c have been reported to work for the combined sound/radiocard)."); 75 76 module_param_array(radio_nr, int, NULL, 0444); 77 MODULE_PARM_DESC(radio_nr, "Radio device numbers"); 78 79 /* 80 * Frequency calculation constants. Intermediate frequency 10.52 MHz (nominal 81 * value 10.7 MHz), reference divisor 6.39 kHz (nominal 6.25 kHz). 82 */ 83 #define FSCALE 8 84 #define IF_OFFSET ((unsigned int)(10.52 * 16000 * (1<<FSCALE))) 85 #define REF_FREQ ((unsigned int)(6.39 * 16 * (1<<FSCALE))) 86 87 #define GEMTEK_CK 0x01 /* Clock signal */ 88 #define GEMTEK_DA 0x02 /* Serial data */ 89 #define GEMTEK_CE 0x04 /* Chip enable */ 90 #define GEMTEK_NS 0x08 /* No signal */ 91 #define GEMTEK_MT 0x10 /* Line mute */ 92 #define GEMTEK_STDF_3_125_KHZ 0x01 /* Standard frequency 3.125 kHz */ 93 #define GEMTEK_PLL_OFF 0x07 /* PLL off */ 94 95 #define BU2614_BUS_SIZE 32 /* BU2614 / BU2614FS bus size */ 96 97 #define SHORT_DELAY 5 /* usec */ 98 #define LONG_DELAY 75 /* usec */ 99 100 struct gemtek { 101 struct radio_isa_card isa; 102 bool muted; 103 u32 bu2614data; 104 }; 105 106 #define BU2614_FREQ_BITS 16 /* D0..D15, Frequency data */ 107 #define BU2614_PORT_BITS 3 /* P0..P2, Output port control data */ 108 #define BU2614_VOID_BITS 4 /* unused */ 109 #define BU2614_FMES_BITS 1 /* CT, Frequency measurement beginning data */ 110 #define BU2614_STDF_BITS 3 /* R0..R2, Standard frequency data */ 111 #define BU2614_SWIN_BITS 1 /* S, Switch between FMIN / AMIN */ 112 #define BU2614_SWAL_BITS 1 /* PS, Swallow counter division (AMIN only)*/ 113 #define BU2614_VOID2_BITS 1 /* unused */ 114 #define BU2614_FMUN_BITS 1 /* GT, Frequency measurement time & unlock */ 115 #define BU2614_TEST_BITS 1 /* TS, Test data is input */ 116 117 #define BU2614_FREQ_SHIFT 0 118 #define BU2614_PORT_SHIFT (BU2614_FREQ_BITS + BU2614_FREQ_SHIFT) 119 #define BU2614_VOID_SHIFT (BU2614_PORT_BITS + BU2614_PORT_SHIFT) 120 #define BU2614_FMES_SHIFT (BU2614_VOID_BITS + BU2614_VOID_SHIFT) 121 #define BU2614_STDF_SHIFT (BU2614_FMES_BITS + BU2614_FMES_SHIFT) 122 #define BU2614_SWIN_SHIFT (BU2614_STDF_BITS + BU2614_STDF_SHIFT) 123 #define BU2614_SWAL_SHIFT (BU2614_SWIN_BITS + BU2614_SWIN_SHIFT) 124 #define BU2614_VOID2_SHIFT (BU2614_SWAL_BITS + BU2614_SWAL_SHIFT) 125 #define BU2614_FMUN_SHIFT (BU2614_VOID2_BITS + BU2614_VOID2_SHIFT) 126 #define BU2614_TEST_SHIFT (BU2614_FMUN_BITS + BU2614_FMUN_SHIFT) 127 128 #define MKMASK(field) (((1UL<<BU2614_##field##_BITS) - 1) << \ 129 BU2614_##field##_SHIFT) 130 #define BU2614_PORT_MASK MKMASK(PORT) 131 #define BU2614_FREQ_MASK MKMASK(FREQ) 132 #define BU2614_VOID_MASK MKMASK(VOID) 133 #define BU2614_FMES_MASK MKMASK(FMES) 134 #define BU2614_STDF_MASK MKMASK(STDF) 135 #define BU2614_SWIN_MASK MKMASK(SWIN) 136 #define BU2614_SWAL_MASK MKMASK(SWAL) 137 #define BU2614_VOID2_MASK MKMASK(VOID2) 138 #define BU2614_FMUN_MASK MKMASK(FMUN) 139 #define BU2614_TEST_MASK MKMASK(TEST) 140 141 /* 142 * Set data which will be sent to BU2614FS. 143 */ 144 #define gemtek_bu2614_set(dev, field, data) ((dev)->bu2614data = \ 145 ((dev)->bu2614data & ~field##_MASK) | ((data) << field##_SHIFT)) 146 147 /* 148 * Transmit settings to BU2614FS over GemTek IC. 149 */ 150 static void gemtek_bu2614_transmit(struct gemtek *gt) 151 { 152 struct radio_isa_card *isa = >->isa; 153 int i, bit, q, mute; 154 155 mute = gt->muted ? GEMTEK_MT : 0x00; 156 157 outb_p(mute | GEMTEK_CE | GEMTEK_DA | GEMTEK_CK, isa->io); 158 udelay(LONG_DELAY); 159 160 for (i = 0, q = gt->bu2614data; i < 32; i++, q >>= 1) { 161 bit = (q & 1) ? GEMTEK_DA : 0; 162 outb_p(mute | GEMTEK_CE | bit, isa->io); 163 udelay(SHORT_DELAY); 164 outb_p(mute | GEMTEK_CE | bit | GEMTEK_CK, isa->io); 165 udelay(SHORT_DELAY); 166 } 167 168 outb_p(mute | GEMTEK_DA | GEMTEK_CK, isa->io); 169 udelay(SHORT_DELAY); 170 } 171 172 /* 173 * Calculate divisor from FM-frequency for BU2614FS (3.125 KHz STDF expected). 174 */ 175 static unsigned long gemtek_convfreq(unsigned long freq) 176 { 177 return ((freq << FSCALE) + IF_OFFSET + REF_FREQ / 2) / REF_FREQ; 178 } 179 180 static struct radio_isa_card *gemtek_alloc(void) 181 { 182 struct gemtek *gt = kzalloc(sizeof(*gt), GFP_KERNEL); 183 184 if (gt) 185 gt->muted = true; 186 return gt ? >->isa : NULL; 187 } 188 189 /* 190 * Set FM-frequency. 191 */ 192 static int gemtek_s_frequency(struct radio_isa_card *isa, u32 freq) 193 { 194 struct gemtek *gt = container_of(isa, struct gemtek, isa); 195 196 if (hardmute && gt->muted) 197 return 0; 198 199 gemtek_bu2614_set(gt, BU2614_PORT, 0); 200 gemtek_bu2614_set(gt, BU2614_FMES, 0); 201 gemtek_bu2614_set(gt, BU2614_SWIN, 0); /* FM-mode */ 202 gemtek_bu2614_set(gt, BU2614_SWAL, 0); 203 gemtek_bu2614_set(gt, BU2614_FMUN, 1); /* GT bit set */ 204 gemtek_bu2614_set(gt, BU2614_TEST, 0); 205 gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_STDF_3_125_KHZ); 206 gemtek_bu2614_set(gt, BU2614_FREQ, gemtek_convfreq(freq)); 207 gemtek_bu2614_transmit(gt); 208 return 0; 209 } 210 211 /* 212 * Set mute flag. 213 */ 214 static int gemtek_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol) 215 { 216 struct gemtek *gt = container_of(isa, struct gemtek, isa); 217 int i; 218 219 gt->muted = mute; 220 if (hardmute) { 221 if (!mute) 222 return gemtek_s_frequency(isa, isa->freq); 223 224 /* Turn off PLL, disable data output */ 225 gemtek_bu2614_set(gt, BU2614_PORT, 0); 226 gemtek_bu2614_set(gt, BU2614_FMES, 0); /* CT bit off */ 227 gemtek_bu2614_set(gt, BU2614_SWIN, 0); /* FM-mode */ 228 gemtek_bu2614_set(gt, BU2614_SWAL, 0); 229 gemtek_bu2614_set(gt, BU2614_FMUN, 0); /* GT bit off */ 230 gemtek_bu2614_set(gt, BU2614_TEST, 0); 231 gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_PLL_OFF); 232 gemtek_bu2614_set(gt, BU2614_FREQ, 0); 233 gemtek_bu2614_transmit(gt); 234 return 0; 235 } 236 237 /* Read bus contents (CE, CK and DA). */ 238 i = inb_p(isa->io); 239 /* Write it back with mute flag set. */ 240 outb_p((i >> 5) | (mute ? GEMTEK_MT : 0), isa->io); 241 udelay(SHORT_DELAY); 242 return 0; 243 } 244 245 static u32 gemtek_g_rxsubchans(struct radio_isa_card *isa) 246 { 247 if (inb_p(isa->io) & GEMTEK_NS) 248 return V4L2_TUNER_SUB_MONO; 249 return V4L2_TUNER_SUB_STEREO; 250 } 251 252 /* 253 * Check if requested card acts like GemTek Radio card. 254 */ 255 static bool gemtek_probe(struct radio_isa_card *isa, int io) 256 { 257 int i, q; 258 259 q = inb_p(io); /* Read bus contents before probing. */ 260 /* Try to turn on CE, CK and DA respectively and check if card responds 261 properly. */ 262 for (i = 0; i < 3; ++i) { 263 outb_p(1 << i, io); 264 udelay(SHORT_DELAY); 265 266 if ((inb_p(io) & ~GEMTEK_NS) != (0x17 | (1 << (i + 5)))) 267 return false; 268 } 269 outb_p(q >> 5, io); /* Write bus contents back. */ 270 udelay(SHORT_DELAY); 271 return true; 272 } 273 274 static const struct radio_isa_ops gemtek_ops = { 275 .alloc = gemtek_alloc, 276 .probe = gemtek_probe, 277 .s_mute_volume = gemtek_s_mute_volume, 278 .s_frequency = gemtek_s_frequency, 279 .g_rxsubchans = gemtek_g_rxsubchans, 280 }; 281 282 static const int gemtek_ioports[] = { 0x20c, 0x30c, 0x24c, 0x34c, 0x248, 0x28c }; 283 284 #ifdef CONFIG_PNP 285 static const struct pnp_device_id gemtek_pnp_devices[] = { 286 /* AOpen FX-3D/Pro Radio */ 287 {.id = "ADS7183", .driver_data = 0}, 288 {.id = ""} 289 }; 290 291 MODULE_DEVICE_TABLE(pnp, gemtek_pnp_devices); 292 #endif 293 294 static struct radio_isa_driver gemtek_driver = { 295 .driver = { 296 .match = radio_isa_match, 297 .probe = radio_isa_probe, 298 .remove = radio_isa_remove, 299 .driver = { 300 .name = "radio-gemtek", 301 }, 302 }, 303 #ifdef CONFIG_PNP 304 .pnp_driver = { 305 .name = "radio-gemtek", 306 .id_table = gemtek_pnp_devices, 307 .probe = radio_isa_pnp_probe, 308 .remove = radio_isa_pnp_remove, 309 }, 310 #endif 311 .io_params = io, 312 .radio_nr_params = radio_nr, 313 .io_ports = gemtek_ioports, 314 .num_of_io_ports = ARRAY_SIZE(gemtek_ioports), 315 .region_size = 1, 316 .card = "GemTek Radio", 317 .ops = &gemtek_ops, 318 .has_stereo = true, 319 }; 320 321 static int __init gemtek_init(void) 322 { 323 gemtek_driver.probe = probe; 324 #ifdef CONFIG_PNP 325 pnp_register_driver(&gemtek_driver.pnp_driver); 326 #endif 327 return isa_register_driver(&gemtek_driver.driver, GEMTEK_MAX); 328 } 329 330 static void __exit gemtek_exit(void) 331 { 332 hardmute = true; /* Turn off PLL */ 333 #ifdef CONFIG_PNP 334 pnp_unregister_driver(&gemtek_driver.pnp_driver); 335 #endif 336 isa_unregister_driver(&gemtek_driver.driver); 337 } 338 339 module_init(gemtek_init); 340 module_exit(gemtek_exit); 341