1# 2# Multimedia Video device configuration 3# 4 5menuconfig RADIO_ADAPTERS 6 bool "Radio Adapters" 7 depends on VIDEO_V4L2 8 default y 9 ---help--- 10 Say Y here to enable selecting AM/FM radio adapters. 11 12if RADIO_ADAPTERS && VIDEO_V4L2 13 14config RADIO_CADET 15 tristate "ADS Cadet AM/FM Tuner" 16 depends on ISA && VIDEO_V4L2 17 ---help--- 18 Choose Y here if you have one of these AM/FM radio cards, and then 19 fill in the port address below. 20 21 In order to control your radio card, you will need to use programs 22 that are compatible with the Video For Linux API. Information on 23 this API and pointers to "v4l" programs may be found at 24 <file:Documentation/video4linux/API.html>. 25 26 Further documentation on this driver can be found on the WWW at 27 <http://linux.blackhawke.net/cadet/>. 28 29 To compile this driver as a module, choose M here: the 30 module will be called radio-cadet. 31 32config RADIO_RTRACK 33 tristate "AIMSlab RadioTrack (aka RadioReveal) support" 34 depends on ISA && VIDEO_V4L2 35 ---help--- 36 Choose Y here if you have one of these FM radio cards, and then fill 37 in the port address below. 38 39 Note that newer AIMSlab RadioTrack cards have a different chipset 40 and are not supported by this driver. For these cards, use the 41 RadioTrack II driver below. 42 43 If you have a GemTeks combined (PnP) sound- and radio card you must 44 use this driver as a module and setup the card with isapnptools. 45 You must also pass the module a suitable io parameter, 0x248 has 46 been reported to be used by these cards. 47 48 In order to control your radio card, you will need to use programs 49 that are compatible with the Video For Linux API. Information on 50 this API and pointers to "v4l" programs may be found at 51 <file:Documentation/video4linux/API.html>. More information is 52 contained in the file 53 <file:Documentation/video4linux/radiotrack.txt>. 54 55 To compile this driver as a module, choose M here: the 56 module will be called radio-aimslab. 57 58config RADIO_RTRACK_PORT 59 hex "RadioTrack i/o port (0x20f or 0x30f)" 60 depends on RADIO_RTRACK=y 61 default "20f" 62 help 63 Enter either 0x30f or 0x20f here. The card default is 0x30f, if you 64 haven't changed the jumper setting on the card. 65 66config RADIO_RTRACK2 67 tristate "AIMSlab RadioTrack II support" 68 depends on ISA && VIDEO_V4L2 69 ---help--- 70 Choose Y here if you have this FM radio card, and then fill in the 71 port address below. 72 73 In order to control your radio card, you will need to use programs 74 that are compatible with the Video For Linux API. Information on 75 this API and pointers to "v4l" programs may be found at 76 <file:Documentation/video4linux/API.html>. 77 78 To compile this driver as a module, choose M here: the 79 module will be called radio-rtrack2. 80 81config RADIO_RTRACK2_PORT 82 hex "RadioTrack II i/o port (0x20c or 0x30c)" 83 depends on RADIO_RTRACK2=y 84 default "30c" 85 help 86 Enter either 0x30c or 0x20c here. The card default is 0x30c, if you 87 haven't changed the jumper setting on the card. 88 89config RADIO_AZTECH 90 tristate "Aztech/Packard Bell Radio" 91 depends on ISA && VIDEO_V4L2 92 ---help--- 93 Choose Y here if you have one of these FM radio cards, and then fill 94 in the port address below. 95 96 In order to control your radio card, you will need to use programs 97 that are compatible with the Video For Linux API. Information on 98 this API and pointers to "v4l" programs may be found at 99 <file:Documentation/video4linux/API.html>. 100 101 To compile this driver as a module, choose M here: the 102 module will be called radio-aztech. 103 104config RADIO_AZTECH_PORT 105 hex "Aztech/Packard Bell I/O port (0x350 or 0x358)" 106 depends on RADIO_AZTECH=y 107 default "350" 108 help 109 Enter either 0x350 or 0x358 here. The card default is 0x350, if you 110 haven't changed the setting of jumper JP3 on the card. Removing the 111 jumper sets the card to 0x358. 112 113config RADIO_GEMTEK 114 tristate "GemTek Radio card (or compatible) support" 115 depends on ISA && VIDEO_V4L2 116 ---help--- 117 Choose Y here if you have this FM radio card, and then fill in the 118 I/O port address and settings below. The following cards either have 119 GemTek Radio tuner or are rebranded GemTek Radio cards: 120 121 - Sound Vision 16 Gold with FM Radio 122 - Typhoon Radio card (some models) 123 - Hama Radio card 124 125 In order to control your radio card, you will need to use programs 126 that are compatible with the Video For Linux API. Information on 127 this API and pointers to "v4l" programs may be found at 128 <file:Documentation/video4linux/API.html>. 129 130 To compile this driver as a module, choose M here: the 131 module will be called radio-gemtek. 132 133config RADIO_GEMTEK_PORT 134 hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0c24c or 0x28c)" 135 depends on RADIO_GEMTEK=y 136 default "34c" 137 help 138 Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is 139 0x34c, if you haven't changed the jumper setting on the card. On 140 Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O 141 port is 0x20c, 0x248 or 0x28c. 142 If automatic I/O port probing is enabled this port will be used only 143 in case of automatic probing failure, ie. as a fallback. 144 145config RADIO_GEMTEK_PROBE 146 bool "Automatic I/O port probing" 147 depends on RADIO_GEMTEK=y 148 default y 149 help 150 Say Y here to enable automatic probing for GemTek Radio card. The 151 following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and 152 0x28c. 153 154config RADIO_GEMTEK_PCI 155 tristate "GemTek PCI Radio Card support" 156 depends on VIDEO_V4L2 && PCI 157 ---help--- 158 Choose Y here if you have this PCI FM radio card. 159 160 In order to control your radio card, you will need to use programs 161 that are compatible with the Video for Linux API. Information on 162 this API and pointers to "v4l" programs may be found at 163 <file:Documentation/video4linux/API.html>. 164 165 To compile this driver as a module, choose M here: the 166 module will be called radio-gemtek-pci. 167 168config RADIO_MAXIRADIO 169 tristate "Guillemot MAXI Radio FM 2000 radio" 170 depends on VIDEO_V4L2 && PCI 171 ---help--- 172 Choose Y here if you have this radio card. This card may also be 173 found as Gemtek PCI FM. 174 175 In order to control your radio card, you will need to use programs 176 that are compatible with the Video For Linux API. Information on 177 this API and pointers to "v4l" programs may be found at 178 <file:Documentation/video4linux/API.html>. 179 180 To compile this driver as a module, choose M here: the 181 module will be called radio-maxiradio. 182 183config RADIO_MAESTRO 184 tristate "Maestro on board radio" 185 depends on VIDEO_V4L2 && PCI 186 ---help--- 187 Say Y here to directly support the on-board radio tuner on the 188 Maestro 2 or 2E sound card. 189 190 In order to control your radio card, you will need to use programs 191 that are compatible with the Video For Linux API. Information on 192 this API and pointers to "v4l" programs may be found at 193 <file:Documentation/video4linux/API.html>. 194 195 To compile this driver as a module, choose M here: the 196 module will be called radio-maestro. 197 198config RADIO_SF16FMI 199 tristate "SF16FMI Radio" 200 depends on ISA && VIDEO_V4L2 201 ---help--- 202 Choose Y here if you have one of these FM radio cards. If you 203 compile the driver into the kernel and your card is not PnP one, you 204 have to add "sf16fm=<io>" to the kernel command line (I/O address is 205 0x284 or 0x384). 206 207 In order to control your radio card, you will need to use programs 208 that are compatible with the Video For Linux API. Information on 209 this API and pointers to "v4l" programs may be found at 210 <file:Documentation/video4linux/API.html>. 211 212 To compile this driver as a module, choose M here: the 213 module will be called radio-sf16fmi. 214 215config RADIO_SF16FMR2 216 tristate "SF16FMR2 Radio" 217 depends on ISA && VIDEO_V4L2 218 ---help--- 219 Choose Y here if you have one of these FM radio cards. 220 221 In order to control your radio card, you will need to use programs 222 that are compatible with the Video For Linux API. Information on 223 this API and pointers to "v4l" programs may be found on the WWW at 224 <http://roadrunner.swansea.uk.linux.org/v4l.shtml>. 225 226 To compile this driver as a module, choose M here: the 227 module will be called radio-sf16fmr2. 228 229config RADIO_TERRATEC 230 tristate "TerraTec ActiveRadio ISA Standalone" 231 depends on ISA && VIDEO_V4L2 232 ---help--- 233 Choose Y here if you have this FM radio card, and then fill in the 234 port address below. (TODO) 235 236 Note: This driver is in its early stages. Right now volume and 237 frequency control and muting works at least for me, but 238 unfortunately I have not found anybody who wants to use this card 239 with Linux. So if it is this what YOU are trying to do right now, 240 PLEASE DROP ME A NOTE!! Rolf Offermanns <rolf@offermanns.de>. 241 242 In order to control your radio card, you will need to use programs 243 that are compatible with the Video For Linux API. Information on 244 this API and pointers to "v4l" programs may be found at 245 <file:Documentation/video4linux/API.html>. 246 247 To compile this driver as a module, choose M here: the 248 module will be called radio-terratec. 249 250config RADIO_TERRATEC_PORT 251 hex "Terratec i/o port (normally 0x590)" 252 depends on RADIO_TERRATEC=y 253 default "590" 254 help 255 Fill in the I/O port of your TerraTec FM radio card. If unsure, go 256 with the default. 257 258config RADIO_TRUST 259 tristate "Trust FM radio card" 260 depends on ISA && VIDEO_V4L2 261 help 262 This is a driver for the Trust FM radio cards. Say Y if you have 263 such a card and want to use it under Linux. 264 265 To compile this driver as a module, choose M here: the 266 module will be called radio-trust. 267 268config RADIO_TRUST_PORT 269 hex "Trust i/o port (usually 0x350 or 0x358)" 270 depends on RADIO_TRUST=y 271 default "350" 272 help 273 Enter the I/O port of your Trust FM radio card. If unsure, try the 274 values "0x350" or "0x358". 275 276config RADIO_TYPHOON 277 tristate "Typhoon Radio (a.k.a. EcoRadio)" 278 depends on ISA && VIDEO_V4L2 279 ---help--- 280 Choose Y here if you have one of these FM radio cards, and then fill 281 in the port address and the frequency used for muting below. 282 283 In order to control your radio card, you will need to use programs 284 that are compatible with the Video For Linux API. Information on 285 this API and pointers to "v4l" programs may be found at 286 <file:Documentation/video4linux/API.html>. 287 288 To compile this driver as a module, choose M here: the 289 module will be called radio-typhoon. 290 291config RADIO_TYPHOON_PORT 292 hex "Typhoon I/O port (0x316 or 0x336)" 293 depends on RADIO_TYPHOON=y 294 default "316" 295 help 296 Enter the I/O port of your Typhoon or EcoRadio radio card. 297 298config RADIO_TYPHOON_MUTEFREQ 299 int "Typhoon frequency set when muting the device (kHz)" 300 depends on RADIO_TYPHOON=y 301 default "87500" 302 help 303 Enter the frequency used for muting the radio. The device is never 304 completely silent. If the volume is just turned down, you can still 305 hear silent voices and music. For that reason, the frequency of the 306 radio device is set to the frequency you can enter here whenever 307 the device is muted. There should be no local radio station at that 308 frequency. 309 310config RADIO_ZOLTRIX 311 tristate "Zoltrix Radio" 312 depends on ISA && VIDEO_V4L2 313 ---help--- 314 Choose Y here if you have one of these FM radio cards, and then fill 315 in the port address below. 316 317 In order to control your radio card, you will need to use programs 318 that are compatible with the Video For Linux API. Information on 319 this API and pointers to "v4l" programs may be found at 320 <file:Documentation/video4linux/API.html>. 321 322 To compile this driver as a module, choose M here: the 323 module will be called radio-zoltrix. 324 325config RADIO_ZOLTRIX_PORT 326 hex "ZOLTRIX I/O port (0x20c or 0x30c)" 327 depends on RADIO_ZOLTRIX=y 328 default "20c" 329 help 330 Enter the I/O port of your Zoltrix radio card. 331 332config I2C_SI4713 333 tristate "I2C driver for Silicon Labs Si4713 device" 334 depends on I2C && VIDEO_V4L2 335 ---help--- 336 Say Y here if you want support to Si4713 I2C device. 337 This device driver supports only i2c bus. 338 339 To compile this driver as a module, choose M here: the 340 module will be called si4713. 341 342config RADIO_SI4713 343 tristate "Silicon Labs Si4713 FM Radio Transmitter support" 344 depends on I2C && VIDEO_V4L2 345 select I2C_SI4713 346 ---help--- 347 Say Y here if you want support to Si4713 FM Radio Transmitter. 348 This device can transmit audio through FM. It can transmit 349 EDS and EBDS signals as well. This module is the v4l2 radio 350 interface for the i2c driver of this device. 351 352 To compile this driver as a module, choose M here: the 353 module will be called radio-si4713. 354 355config USB_DSBR 356 tristate "D-Link/GemTek USB FM radio support" 357 depends on USB && VIDEO_V4L2 358 ---help--- 359 Say Y here if you want to connect this type of radio to your 360 computer's USB port. Note that the audio is not digital, and 361 you must connect the line out connector to a sound card or a 362 set of speakers. 363 364 To compile this driver as a module, choose M here: the 365 module will be called dsbr100. 366 367config RADIO_SI470X 368 bool "Silicon Labs Si470x FM Radio Receiver support" 369 depends on VIDEO_V4L2 370 371source "drivers/media/radio/si470x/Kconfig" 372 373config USB_MR800 374 tristate "AverMedia MR 800 USB FM radio support" 375 depends on USB && VIDEO_V4L2 376 ---help--- 377 Say Y here if you want to connect this type of radio to your 378 computer's USB port. Note that the audio is not digital, and 379 you must connect the line out connector to a sound card or a 380 set of speakers. 381 382 To compile this driver as a module, choose M here: the 383 module will be called radio-mr800. 384 385config RADIO_TEA5764 386 tristate "TEA5764 I2C FM radio support" 387 depends on I2C && VIDEO_V4L2 388 ---help--- 389 Say Y here if you want to use the TEA5764 FM chip found in 390 EZX phones. This FM chip is present in EZX phones from Motorola, 391 connected to internal pxa I2C bus. 392 393 To compile this driver as a module, choose M here: the 394 module will be called radio-tea5764. 395 396config RADIO_TEA5764_XTAL 397 bool "TEA5764 crystal reference" 398 depends on RADIO_TEA5764=y 399 default y 400 help 401 Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N 402 here if TEA5764 reference frequency is connected in FREQIN. 403 404endif # RADIO_ADAPTERS 405