1# 2# Multimedia Video device configuration 3# 4 5menuconfig RADIO_ADAPTERS 6 bool "Radio Adapters" 7 depends on VIDEO_V4L2 8 depends on MEDIA_RADIO_SUPPORT 9 default y 10 ---help--- 11 Say Y here to enable selecting AM/FM radio adapters. 12 13if RADIO_ADAPTERS && VIDEO_V4L2 14 15config RADIO_SI470X 16 bool "Silicon Labs Si470x FM Radio Receiver support" 17 depends on VIDEO_V4L2 18 19source "drivers/media/radio/si470x/Kconfig" 20 21config USB_MR800 22 tristate "AverMedia MR 800 USB FM radio support" 23 depends on USB && VIDEO_V4L2 24 ---help--- 25 Say Y here if you want to connect this type of radio to your 26 computer's USB port. Note that the audio is not digital, and 27 you must connect the line out connector to a sound card or a 28 set of speakers. 29 30 To compile this driver as a module, choose M here: the 31 module will be called radio-mr800. 32 33config USB_DSBR 34 tristate "D-Link/GemTek USB FM radio support" 35 depends on USB && VIDEO_V4L2 36 ---help--- 37 Say Y here if you want to connect this type of radio to your 38 computer's USB port. Note that the audio is not digital, and 39 you must connect the line out connector to a sound card or a 40 set of speakers. 41 42 To compile this driver as a module, choose M here: the 43 module will be called dsbr100. 44 45config RADIO_MAXIRADIO 46 tristate "Guillemot MAXI Radio FM 2000 radio" 47 depends on VIDEO_V4L2 && PCI && SND 48 ---help--- 49 Choose Y here if you have this radio card. This card may also be 50 found as Gemtek PCI FM. 51 52 In order to control your radio card, you will need to use programs 53 that are compatible with the Video For Linux API. Information on 54 this API and pointers to "v4l" programs may be found at 55 <file:Documentation/video4linux/API.html>. 56 57 To compile this driver as a module, choose M here: the 58 module will be called radio-maxiradio. 59 60config RADIO_SHARK 61 tristate "Griffin radioSHARK USB radio receiver" 62 depends on USB && SND 63 ---help--- 64 Choose Y here if you have this radio receiver. 65 66 There are 2 versions of this device, this driver is for version 1, 67 which is white. 68 69 In order to control your radio card, you will need to use programs 70 that are compatible with the Video For Linux API. Information on 71 this API and pointers to "v4l" programs may be found at 72 <file:Documentation/video4linux/API.html>. 73 74 To compile this driver as a module, choose M here: the 75 module will be called radio-shark. 76 77config RADIO_SHARK2 78 tristate "Griffin radioSHARK2 USB radio receiver" 79 depends on USB 80 ---help--- 81 Choose Y here if you have this radio receiver. 82 83 There are 2 versions of this device, this driver is for version 2, 84 which is black. 85 86 In order to control your radio card, you will need to use programs 87 that are compatible with the Video For Linux API. Information on 88 this API and pointers to "v4l" programs may be found at 89 <file:Documentation/video4linux/API.html>. 90 91 To compile this driver as a module, choose M here: the 92 module will be called radio-shark2. 93 94config I2C_SI4713 95 tristate "I2C driver for Silicon Labs Si4713 device" 96 depends on I2C && VIDEO_V4L2 97 ---help--- 98 Say Y here if you want support to Si4713 I2C device. 99 This device driver supports only i2c bus. 100 101 To compile this driver as a module, choose M here: the 102 module will be called si4713. 103 104config RADIO_SI4713 105 tristate "Silicon Labs Si4713 FM Radio Transmitter support" 106 depends on I2C && VIDEO_V4L2 107 select I2C_SI4713 108 ---help--- 109 Say Y here if you want support to Si4713 FM Radio Transmitter. 110 This device can transmit audio through FM. It can transmit 111 RDS and RBDS signals as well. This module is the v4l2 radio 112 interface for the i2c driver of this device. 113 114 To compile this driver as a module, choose M here: the 115 module will be called radio-si4713. 116 117config USB_KEENE 118 tristate "Keene FM Transmitter USB support" 119 depends on USB && VIDEO_V4L2 120 ---help--- 121 Say Y here if you want to connect this type of FM transmitter 122 to your computer's USB port. 123 124 To compile this driver as a module, choose M here: the 125 module will be called radio-keene. 126 127config RADIO_TEA5764 128 tristate "TEA5764 I2C FM radio support" 129 depends on I2C && VIDEO_V4L2 130 ---help--- 131 Say Y here if you want to use the TEA5764 FM chip found in 132 EZX phones. This FM chip is present in EZX phones from Motorola, 133 connected to internal pxa I2C bus. 134 135 To compile this driver as a module, choose M here: the 136 module will be called radio-tea5764. 137 138config RADIO_TEA5764_XTAL 139 bool "TEA5764 crystal reference" 140 depends on RADIO_TEA5764=y 141 default y 142 help 143 Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N 144 here if TEA5764 reference frequency is connected in FREQIN. 145 146config RADIO_SAA7706H 147 tristate "SAA7706H Car Radio DSP" 148 depends on I2C && VIDEO_V4L2 149 ---help--- 150 Say Y here if you want to use the SAA7706H Car radio Digital 151 Signal Processor, found for instance on the Russellville development 152 board. On the russellville the device is connected to internal 153 timberdale I2C bus. 154 155 To compile this driver as a module, choose M here: the 156 module will be called SAA7706H. 157 158config RADIO_TEF6862 159 tristate "TEF6862 Car Radio Enhanced Selectivity Tuner" 160 depends on I2C && VIDEO_V4L2 161 ---help--- 162 Say Y here if you want to use the TEF6862 Car Radio Enhanced 163 Selectivity Tuner, found for instance on the Russellville development 164 board. On the russellville the device is connected to internal 165 timberdale I2C bus. 166 167 To compile this driver as a module, choose M here: the 168 module will be called TEF6862. 169 170config RADIO_TIMBERDALE 171 tristate "Enable the Timberdale radio driver" 172 depends on MFD_TIMBERDALE && VIDEO_V4L2 173 depends on I2C # for RADIO_SAA7706H 174 select RADIO_TEF6862 175 select RADIO_SAA7706H 176 ---help--- 177 This is a kind of umbrella driver for the Radio Tuner and DSP 178 found behind the Timberdale FPGA on the Russellville board. 179 Enabling this driver will automatically select the DSP and tuner. 180 181config RADIO_WL1273 182 tristate "Texas Instruments WL1273 I2C FM Radio" 183 depends on I2C && VIDEO_V4L2 && GENERIC_HARDIRQS 184 select MFD_CORE 185 select MFD_WL1273_CORE 186 select FW_LOADER 187 ---help--- 188 Choose Y here if you have this FM radio chip. 189 190 In order to control your radio card, you will need to use programs 191 that are compatible with the Video For Linux 2 API. Information on 192 this API and pointers to "v4l2" programs may be found at 193 <file:Documentation/video4linux/API.html>. 194 195 To compile this driver as a module, choose M here: the 196 module will be called radio-wl1273. 197 198# TI's ST based wl128x FM radio 199source "drivers/media/radio/wl128x/Kconfig" 200 201# 202# ISA drivers configuration 203# 204 205menuconfig V4L_RADIO_ISA_DRIVERS 206 bool "ISA radio devices" 207 depends on ISA 208 default n 209 ---help--- 210 Say Y here to enable support for these ISA drivers. 211 212if V4L_RADIO_ISA_DRIVERS 213 214config RADIO_ISA 215 depends on ISA 216 tristate 217 218config RADIO_CADET 219 tristate "ADS Cadet AM/FM Tuner" 220 depends on ISA && VIDEO_V4L2 221 ---help--- 222 Choose Y here if you have one of these AM/FM radio cards, and then 223 fill in the port address below. 224 225 To compile this driver as a module, choose M here: the 226 module will be called radio-cadet. 227 228config RADIO_RTRACK 229 tristate "AIMSlab RadioTrack (aka RadioReveal) support" 230 depends on ISA && VIDEO_V4L2 231 select RADIO_ISA 232 ---help--- 233 Choose Y here if you have one of these FM radio cards, and then fill 234 in the port address below. 235 236 Note that newer AIMSlab RadioTrack cards have a different chipset 237 and are not supported by this driver. For these cards, use the 238 RadioTrack II driver below. 239 240 If you have a GemTeks combined (PnP) sound- and radio card you must 241 use this driver as a module and setup the card with isapnptools. 242 You must also pass the module a suitable io parameter, 0x248 has 243 been reported to be used by these cards. 244 245 More information is contained in the file 246 <file:Documentation/video4linux/radiotrack.txt>. 247 248 To compile this driver as a module, choose M here: the 249 module will be called radio-aimslab. 250 251config RADIO_RTRACK_PORT 252 hex "RadioTrack i/o port (0x20f or 0x30f)" 253 depends on RADIO_RTRACK=y 254 default "30f" 255 help 256 Enter either 0x30f or 0x20f here. The card default is 0x30f, if you 257 haven't changed the jumper setting on the card. 258 259config RADIO_RTRACK2 260 tristate "AIMSlab RadioTrack II support" 261 depends on ISA && VIDEO_V4L2 262 select RADIO_ISA 263 ---help--- 264 Choose Y here if you have this FM radio card, and then fill in the 265 port address below. 266 267 Note: this driver hasn't been tested since a long time due to lack 268 of hardware. If you have this hardware, then please contact the 269 linux-media mailinglist. 270 271 To compile this driver as a module, choose M here: the 272 module will be called radio-rtrack2. 273 274config RADIO_RTRACK2_PORT 275 hex "RadioTrack II i/o port (0x20c or 0x30c)" 276 depends on RADIO_RTRACK2=y 277 default "30c" 278 help 279 Enter either 0x30c or 0x20c here. The card default is 0x30c, if you 280 haven't changed the jumper setting on the card. 281 282config RADIO_AZTECH 283 tristate "Aztech/Packard Bell Radio" 284 depends on ISA && VIDEO_V4L2 285 select RADIO_ISA 286 ---help--- 287 Choose Y here if you have one of these FM radio cards, and then fill 288 in the port address below. 289 290 To compile this driver as a module, choose M here: the 291 module will be called radio-aztech. 292 293config RADIO_AZTECH_PORT 294 hex "Aztech/Packard Bell I/O port (0x350 or 0x358)" 295 depends on RADIO_AZTECH=y 296 default "350" 297 help 298 Enter either 0x350 or 0x358 here. The card default is 0x350, if you 299 haven't changed the setting of jumper JP3 on the card. Removing the 300 jumper sets the card to 0x358. 301 302config RADIO_GEMTEK 303 tristate "GemTek Radio card (or compatible) support" 304 depends on ISA && VIDEO_V4L2 305 select RADIO_ISA 306 ---help--- 307 Choose Y here if you have this FM radio card, and then fill in the 308 I/O port address and settings below. The following cards either have 309 GemTek Radio tuner or are rebranded GemTek Radio cards: 310 311 - Sound Vision 16 Gold with FM Radio 312 - Typhoon Radio card (some models) 313 - Hama Radio card 314 315 To compile this driver as a module, choose M here: the 316 module will be called radio-gemtek. 317 318config RADIO_GEMTEK_PORT 319 hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)" 320 depends on RADIO_GEMTEK=y 321 default "34c" 322 help 323 Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The 324 card default is 0x34c, if you haven't changed the jumper setting 325 on the card. 326 327 On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O 328 port is 0x20c, 0x248 or 0x28c. 329 330 If automatic I/O port probing is enabled this port will be used only 331 in case of automatic probing failure, ie. as a fallback. 332 333config RADIO_GEMTEK_PROBE 334 bool "Automatic I/O port probing" 335 depends on RADIO_GEMTEK=y 336 default y 337 help 338 Say Y here to enable automatic probing for GemTek Radio card. The 339 following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and 340 0x28c. 341 342config RADIO_MIROPCM20 343 tristate "miroSOUND PCM20 radio" 344 depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND 345 select SND_ISA 346 select SND_MIRO 347 ---help--- 348 Choose Y here if you have this FM radio card. You also need to enable 349 the ALSA sound system. This choice automatically selects the ALSA 350 sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this 351 is required for the radio-miropcm20. 352 353 To compile this driver as a module, choose M here: the 354 module will be called radio-miropcm20. 355 356config RADIO_SF16FMI 357 tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio" 358 depends on ISA && VIDEO_V4L2 359 ---help--- 360 Choose Y here if you have one of these FM radio cards. 361 362 To compile this driver as a module, choose M here: the 363 module will be called radio-sf16fmi. 364 365config RADIO_SF16FMR2 366 tristate "SF16-FMR2/SF16-FMD2 Radio" 367 depends on ISA && VIDEO_V4L2 && SND 368 ---help--- 369 Choose Y here if you have one of these FM radio cards. 370 371 To compile this driver as a module, choose M here: the 372 module will be called radio-sf16fmr2. 373 374config RADIO_TERRATEC 375 tristate "TerraTec ActiveRadio ISA Standalone" 376 depends on ISA && VIDEO_V4L2 377 select RADIO_ISA 378 ---help--- 379 Choose Y here if you have this FM radio card. 380 381 Note: this driver hasn't been tested since a long time due to lack 382 of hardware. If you have this hardware, then please contact the 383 linux-media mailinglist. 384 385 To compile this driver as a module, choose M here: the 386 module will be called radio-terratec. 387 388config RADIO_TRUST 389 tristate "Trust FM radio card" 390 depends on ISA && VIDEO_V4L2 391 select RADIO_ISA 392 help 393 This is a driver for the Trust FM radio cards. Say Y if you have 394 such a card and want to use it under Linux. 395 396 Note: this driver hasn't been tested since a long time due to lack 397 of hardware. If you have this hardware, then please contact the 398 linux-media mailinglist. 399 400 To compile this driver as a module, choose M here: the 401 module will be called radio-trust. 402 403config RADIO_TRUST_PORT 404 hex "Trust i/o port (usually 0x350 or 0x358)" 405 depends on RADIO_TRUST=y 406 default "350" 407 help 408 Enter the I/O port of your Trust FM radio card. If unsure, try the 409 values "0x350" or "0x358". 410 411config RADIO_TYPHOON 412 tristate "Typhoon Radio (a.k.a. EcoRadio)" 413 depends on ISA && VIDEO_V4L2 414 select RADIO_ISA 415 ---help--- 416 Choose Y here if you have one of these FM radio cards, and then fill 417 in the port address and the frequency used for muting below. 418 419 Note: this driver hasn't been tested since a long time due to lack 420 of hardware. If you have this hardware, then please contact the 421 linux-media mailinglist. 422 423 To compile this driver as a module, choose M here: the 424 module will be called radio-typhoon. 425 426config RADIO_TYPHOON_PORT 427 hex "Typhoon I/O port (0x316 or 0x336)" 428 depends on RADIO_TYPHOON=y 429 default "316" 430 help 431 Enter the I/O port of your Typhoon or EcoRadio radio card. 432 433config RADIO_TYPHOON_MUTEFREQ 434 int "Typhoon frequency set when muting the device (kHz)" 435 depends on RADIO_TYPHOON=y 436 default "87500" 437 help 438 Enter the frequency used for muting the radio. The device is never 439 completely silent. If the volume is just turned down, you can still 440 hear silent voices and music. For that reason, the frequency of the 441 radio device is set to the frequency you can enter here whenever 442 the device is muted. There should be no local radio station at that 443 frequency. 444 445config RADIO_ZOLTRIX 446 tristate "Zoltrix Radio" 447 depends on ISA && VIDEO_V4L2 448 select RADIO_ISA 449 ---help--- 450 Choose Y here if you have one of these FM radio cards, and then fill 451 in the port address below. 452 453 Note: this driver hasn't been tested since a long time due to lack 454 of hardware. If you have this hardware, then please contact the 455 linux-media mailinglist. 456 457 To compile this driver as a module, choose M here: the 458 module will be called radio-zoltrix. 459 460config RADIO_ZOLTRIX_PORT 461 hex "ZOLTRIX I/O port (0x20c or 0x30c)" 462 depends on RADIO_ZOLTRIX=y 463 default "20c" 464 help 465 Enter the I/O port of your Zoltrix radio card. 466 467endif # V4L_RADIO_ISA_DRIVERS 468 469endif # RADIO_ADAPTERS 470