1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Multimedia Video device configuration 4# 5 6menuconfig RADIO_ADAPTERS 7 tristate "Radio Adapters" 8 depends on VIDEO_DEV 9 depends on MEDIA_RADIO_SUPPORT 10 default VIDEO_DEV 11 help 12 Say Y here to enable selecting AM/FM radio adapters. 13 14if RADIO_ADAPTERS 15 16config RADIO_MAXIRADIO 17 tristate "Guillemot MAXI Radio FM 2000 radio" 18 depends on PCI && HAS_IOPORT 19 select RADIO_TEA575X 20 help 21 Choose Y here if you have this radio card. This card may also be 22 found as Gemtek PCI FM. 23 24 In order to control your radio card, you will need to use programs 25 that are compatible with the Video For Linux API. Information on 26 this API and pointers to "v4l" programs may be found at 27 <file:Documentation/userspace-api/media/index.rst>. 28 29 To compile this driver as a module, choose M here: the 30 module will be called radio-maxiradio. 31 32config RADIO_SAA7706H 33 tristate "SAA7706H Car Radio DSP" 34 depends on I2C 35 help 36 Say Y here if you want to use the SAA7706H Car radio Digital 37 Signal Processor, found for instance on the Russellville development 38 board. On the russellville the device is connected to internal 39 timberdale I2C bus. 40 41 To compile this driver as a module, choose M here: the 42 module will be called SAA7706H. 43 44config RADIO_SHARK 45 tristate "Griffin radioSHARK USB radio receiver" 46 depends on USB 47 select RADIO_TEA575X 48 help 49 Choose Y here if you have this radio receiver. 50 51 There are 2 versions of this device, this driver is for version 1, 52 which is white. 53 54 In order to control your radio card, you will need to use programs 55 that are compatible with the Video For Linux API. Information on 56 this API and pointers to "v4l" programs may be found at 57 <file:Documentation/userspace-api/media/index.rst>. 58 59 To compile this driver as a module, choose M here: the 60 module will be called radio-shark. 61 62config RADIO_SHARK2 63 tristate "Griffin radioSHARK2 USB radio receiver" 64 depends on USB 65 help 66 Choose Y here if you have this radio receiver. 67 68 There are 2 versions of this device, this driver is for version 2, 69 which is black. 70 71 In order to control your radio card, you will need to use programs 72 that are compatible with the Video For Linux API. Information on 73 this API and pointers to "v4l" programs may be found at 74 <file:Documentation/userspace-api/media/index.rst>. 75 76 To compile this driver as a module, choose M here: the 77 module will be called radio-shark2. 78 79config RADIO_SI4713 80 tristate "Silicon Labs Si4713 FM Radio with RDS Transmitter support" 81 82config RADIO_SI476X 83 tristate "Silicon Laboratories Si476x I2C FM Radio" 84 depends on I2C 85 depends on MFD_SI476X_CORE 86 depends on SND_SOC 87 select SND_SOC_SI476X 88 help 89 Choose Y here if you have this FM radio chip. 90 91 In order to control your radio card, you will need to use programs 92 that are compatible with the Video For Linux 2 API. Information on 93 this API and pointers to "v4l2" programs may be found at 94 <file:Documentation/userspace-api/media/index.rst>. 95 96 To compile this driver as a module, choose M here: the 97 module will be called radio-si476x. 98 99config RADIO_TEA575X 100 tristate 101 102config RADIO_TEA5764 103 tristate "TEA5764 I2C FM radio support" 104 depends on I2C 105 help 106 Say Y here if you want to use the TEA5764 FM chip found in 107 EZX phones. This FM chip is present in EZX phones from Motorola, 108 connected to internal pxa I2C bus. 109 110 To compile this driver as a module, choose M here: the 111 module will be called radio-tea5764. 112 113config RADIO_TEA5764_XTAL 114 bool "TEA5764 crystal reference" 115 depends on RADIO_TEA5764=y 116 default y 117 help 118 Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N 119 here if TEA5764 reference frequency is connected in FREQIN. 120 121config RADIO_TEF6862 122 tristate "TEF6862 Car Radio Enhanced Selectivity Tuner" 123 depends on I2C 124 help 125 Say Y here if you want to use the TEF6862 Car Radio Enhanced 126 Selectivity Tuner, found for instance on the Russellville development 127 board. On the russellville the device is connected to internal 128 timberdale I2C bus. 129 130 To compile this driver as a module, choose M here: the 131 module will be called TEF6862. 132 133config RADIO_TIMBERDALE 134 tristate "Enable the Timberdale radio driver" 135 depends on MFD_TIMBERDALE 136 depends on I2C # for RADIO_SAA7706H 137 select RADIO_TEF6862 138 select RADIO_SAA7706H 139 help 140 This is a kind of umbrella driver for the Radio Tuner and DSP 141 found behind the Timberdale FPGA on the Russellville board. 142 Enabling this driver will automatically select the DSP and tuner. 143 144config RADIO_WL1273 145 tristate "Texas Instruments WL1273 I2C FM Radio" 146 depends on I2C 147 select MFD_CORE 148 select MFD_WL1273_CORE 149 select FW_LOADER 150 help 151 Choose Y here if you have this FM radio chip. 152 153 In order to control your radio card, you will need to use programs 154 that are compatible with the Video For Linux 2 API. Information on 155 this API and pointers to "v4l2" programs may be found at 156 <file:Documentation/userspace-api/media/index.rst>. 157 158 To compile this driver as a module, choose M here: the 159 module will be called radio-wl1273. 160 161config USB_DSBR 162 tristate "D-Link/GemTek USB FM radio support" 163 depends on USB 164 help 165 Say Y here if you want to connect this type of radio to your 166 computer's USB port. Note that the audio is not digital, and 167 you must connect the line out connector to a sound card or a 168 set of speakers. 169 170 To compile this driver as a module, choose M here: the 171 module will be called dsbr100. 172 173config USB_KEENE 174 tristate "Keene FM Transmitter USB support" 175 depends on USB 176 help 177 Say Y here if you want to connect this type of FM transmitter 178 to your computer's USB port. 179 180 To compile this driver as a module, choose M here: the 181 module will be called radio-keene. 182 183config USB_MA901 184 tristate "Masterkit MA901 USB FM radio support" 185 depends on USB 186 help 187 Say Y here if you want to connect this type of radio to your 188 computer's USB port. Note that the audio is not digital, and 189 you must connect the line out connector to a sound card or a 190 set of speakers or headphones. 191 192 To compile this driver as a module, choose M here: the 193 module will be called radio-ma901. 194 195config USB_MR800 196 tristate "AverMedia MR 800 USB FM radio support" 197 depends on USB 198 help 199 Say Y here if you want to connect this type of radio to your 200 computer's USB port. Note that the audio is not digital, and 201 you must connect the line out connector to a sound card or a 202 set of speakers. 203 204 To compile this driver as a module, choose M here: the 205 module will be called radio-mr800. 206 207config USB_RAREMONO 208 tristate "Thanko's Raremono AM/FM/SW radio support" 209 depends on USB 210 help 211 The 'Thanko's Raremono' device contains the Si4734 chip from Silicon Labs Inc. 212 It is one of the very few or perhaps the only consumer USB radio device 213 to receive the AM/FM/SW bands. 214 215 Say Y here if you want to connect this type of AM/FM/SW receiver 216 to your computer's USB port. 217 218 To compile this driver as a module, choose M here: the 219 module will be called radio-raremono. 220 221source "drivers/media/radio/si470x/Kconfig" 222source "drivers/media/radio/si4713/Kconfig" 223 224# TI's ST based wl128x FM radio 225 226source "drivers/media/radio/wl128x/Kconfig" 227 228# 229# ISA drivers configuration 230# 231 232menuconfig V4L_RADIO_ISA_DRIVERS 233 bool "ISA radio devices" 234 depends on ISA || COMPILE_TEST 235 depends on HAS_IOPORT 236 help 237 Say Y here to enable support for these ISA drivers. 238 239if V4L_RADIO_ISA_DRIVERS 240 241config RADIO_AZTECH 242 tristate "Aztech/Packard Bell Radio" 243 depends on ISA || COMPILE_TEST 244 depends on HAS_IOPORT 245 select RADIO_ISA 246 help 247 Choose Y here if you have one of these FM radio cards, and then fill 248 in the port address below. 249 250 To compile this driver as a module, choose M here: the 251 module will be called radio-aztech. 252 253config RADIO_AZTECH_PORT 254 hex "Aztech/Packard Bell I/O port (0x350 or 0x358)" 255 depends on RADIO_AZTECH=y 256 default "350" 257 help 258 Enter either 0x350 or 0x358 here. The card default is 0x350, if you 259 haven't changed the setting of jumper JP3 on the card. Removing the 260 jumper sets the card to 0x358. 261 262config RADIO_CADET 263 tristate "ADS Cadet AM/FM Tuner" 264 depends on ISA || COMPILE_TEST 265 depends on HAS_IOPORT 266 help 267 Choose Y here if you have one of these AM/FM radio cards, and then 268 fill in the port address below. 269 270 To compile this driver as a module, choose M here: the 271 module will be called radio-cadet. 272 273config RADIO_GEMTEK 274 tristate "GemTek Radio card (or compatible) support" 275 depends on ISA || COMPILE_TEST 276 depends on HAS_IOPORT 277 select RADIO_ISA 278 help 279 Choose Y here if you have this FM radio card, and then fill in the 280 I/O port address and settings below. The following cards either have 281 GemTek Radio tuner or are rebranded GemTek Radio cards: 282 283 - Sound Vision 16 Gold with FM Radio 284 - Typhoon Radio card (some models) 285 - Hama Radio card 286 287 To compile this driver as a module, choose M here: the 288 module will be called radio-gemtek. 289 290config RADIO_GEMTEK_PORT 291 hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)" 292 depends on RADIO_GEMTEK=y 293 default "34c" 294 help 295 Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The 296 card default is 0x34c, if you haven't changed the jumper setting 297 on the card. 298 299 On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O 300 port is 0x20c, 0x248 or 0x28c. 301 302 If automatic I/O port probing is enabled this port will be used only 303 in case of automatic probing failure, ie. as a fallback. 304 305config RADIO_GEMTEK_PROBE 306 bool "Automatic I/O port probing" 307 depends on RADIO_GEMTEK=y 308 default y 309 help 310 Say Y here to enable automatic probing for GemTek Radio card. The 311 following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and 312 0x28c. 313 314config RADIO_ISA 315 depends on ISA || COMPILE_TEST 316 depends on HAS_IOPORT 317 tristate 318 319config RADIO_MIROPCM20 320 tristate "miroSOUND PCM20 radio" 321 depends on ISA || COMPILE_TEST 322 depends on ISA_DMA_API && SND 323 select SND_ISA 324 select SND_MIRO 325 help 326 Choose Y here if you have this FM radio card. You also need to enable 327 the ALSA sound system. This choice automatically selects the ALSA 328 sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this 329 is required for the radio-miropcm20. 330 331 To compile this driver as a module, choose M here: the 332 module will be called radio-miropcm20. 333 334config RADIO_RTRACK 335 tristate "AIMSlab RadioTrack (aka RadioReveal) support" 336 depends on ISA || COMPILE_TEST 337 depends on HAS_IOPORT 338 select RADIO_ISA 339 help 340 Choose Y here if you have one of these FM radio cards, and then fill 341 in the port address below. 342 343 Note that newer AIMSlab RadioTrack cards have a different chipset 344 and are not supported by this driver. For these cards, use the 345 RadioTrack II driver below. 346 347 If you have a GemTeks combined (PnP) sound- and radio card you must 348 use this driver as a module and setup the card with isapnptools. 349 You must also pass the module a suitable io parameter, 0x248 has 350 been reported to be used by these cards. 351 352 More information is contained in the file 353 <file:Documentation/driver-api/media/drivers/radiotrack.rst>. 354 355 To compile this driver as a module, choose M here: the 356 module will be called radio-aimslab. 357 358config RADIO_RTRACK2 359 tristate "AIMSlab RadioTrack II support" 360 depends on ISA || COMPILE_TEST 361 select RADIO_ISA 362 help 363 Choose Y here if you have this FM radio card, and then fill in the 364 port address below. 365 366 Note: this driver hasn't been tested since a long time due to lack 367 of hardware. If you have this hardware, then please contact the 368 linux-media mailinglist. 369 370 To compile this driver as a module, choose M here: the 371 module will be called radio-rtrack2. 372 373config RADIO_RTRACK2_PORT 374 hex "RadioTrack II i/o port (0x20c or 0x30c)" 375 depends on RADIO_RTRACK2=y 376 default "30c" 377 help 378 Enter either 0x30c or 0x20c here. The card default is 0x30c, if you 379 haven't changed the jumper setting on the card. 380 381config RADIO_RTRACK_PORT 382 hex "RadioTrack i/o port (0x20f or 0x30f)" 383 depends on RADIO_RTRACK=y 384 default "30f" 385 help 386 Enter either 0x30f or 0x20f here. The card default is 0x30f, if you 387 haven't changed the jumper setting on the card. 388 389config RADIO_SF16FMI 390 tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio" 391 depends on ISA || COMPILE_TEST 392 depends on HAS_IOPORT 393 help 394 Choose Y here if you have one of these FM radio cards. 395 396 To compile this driver as a module, choose M here: the 397 module will be called radio-sf16fmi. 398 399config RADIO_SF16FMR2 400 tristate "SF16-FMR2/SF16-FMD2 Radio" 401 depends on ISA || COMPILE_TEST 402 depends on HAS_IOPORT 403 select RADIO_TEA575X 404 help 405 Choose Y here if you have one of these FM radio cards. 406 407 To compile this driver as a module, choose M here: the 408 module will be called radio-sf16fmr2. 409 410config RADIO_TERRATEC 411 tristate "TerraTec ActiveRadio ISA Standalone" 412 depends on ISA || COMPILE_TEST 413 depends on HAS_IOPORT 414 select RADIO_ISA 415 help 416 Choose Y here if you have this FM radio card. 417 418 Note: this driver hasn't been tested since a long time due to lack 419 of hardware. If you have this hardware, then please contact the 420 linux-media mailinglist. 421 422 To compile this driver as a module, choose M here: the 423 module will be called radio-terratec. 424 425config RADIO_TRUST 426 tristate "Trust FM radio card" 427 depends on ISA || COMPILE_TEST 428 depends on HAS_IOPORT 429 select RADIO_ISA 430 help 431 This is a driver for the Trust FM radio cards. Say Y if you have 432 such a card and want to use it under Linux. 433 434 Note: this driver hasn't been tested since a long time due to lack 435 of hardware. If you have this hardware, then please contact the 436 linux-media mailinglist. 437 438 To compile this driver as a module, choose M here: the 439 module will be called radio-trust. 440 441config RADIO_TRUST_PORT 442 hex "Trust i/o port (usually 0x350 or 0x358)" 443 depends on RADIO_TRUST=y 444 default "350" 445 help 446 Enter the I/O port of your Trust FM radio card. If unsure, try the 447 values "0x350" or "0x358". 448 449config RADIO_TYPHOON 450 tristate "Typhoon Radio (a.k.a. EcoRadio)" 451 depends on ISA || COMPILE_TEST 452 depends on HAS_IOPORT 453 select RADIO_ISA 454 help 455 Choose Y here if you have one of these FM radio cards, and then fill 456 in the port address and the frequency used for muting below. 457 458 Note: this driver hasn't been tested since a long time due to lack 459 of hardware. If you have this hardware, then please contact the 460 linux-media mailinglist. 461 462 To compile this driver as a module, choose M here: the 463 module will be called radio-typhoon. 464 465config RADIO_TYPHOON_MUTEFREQ 466 int "Typhoon frequency set when muting the device (kHz)" 467 depends on RADIO_TYPHOON=y 468 default "87500" 469 help 470 Enter the frequency used for muting the radio. The device is never 471 completely silent. If the volume is just turned down, you can still 472 hear silent voices and music. For that reason, the frequency of the 473 radio device is set to the frequency you can enter here whenever 474 the device is muted. There should be no local radio station at that 475 frequency. 476 477config RADIO_TYPHOON_PORT 478 hex "Typhoon I/O port (0x316 or 0x336)" 479 depends on RADIO_TYPHOON=y 480 default "316" 481 help 482 Enter the I/O port of your Typhoon or EcoRadio radio card. 483 484config RADIO_ZOLTRIX 485 tristate "Zoltrix Radio" 486 depends on ISA || COMPILE_TEST 487 depends on HAS_IOPORT 488 select RADIO_ISA 489 help 490 Choose Y here if you have one of these FM radio cards, and then fill 491 in the port address below. 492 493 Note: this driver hasn't been tested since a long time due to lack 494 of hardware. If you have this hardware, then please contact the 495 linux-media mailinglist. 496 497 To compile this driver as a module, choose M here: the 498 module will be called radio-zoltrix. 499 500config RADIO_ZOLTRIX_PORT 501 hex "ZOLTRIX I/O port (0x20c or 0x30c)" 502 depends on RADIO_ZOLTRIX=y 503 default "20c" 504 help 505 Enter the I/O port of your Zoltrix radio card. 506 507endif # V4L_RADIO_ISA_DRIVERS 508 509endif # RADIO_ADAPTERS 510