1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * Marvell camera core structures. 4 * 5 * Copyright 2011 Jonathan Corbet corbet@lwn.net 6 */ 7 #ifndef _MCAM_CORE_H 8 #define _MCAM_CORE_H 9 10 #include <linux/list.h> 11 #include <linux/clk-provider.h> 12 #include <media/v4l2-common.h> 13 #include <media/v4l2-ctrls.h> 14 #include <media/v4l2-dev.h> 15 #include <media/videobuf2-v4l2.h> 16 17 /* 18 * Create our own symbols for the supported buffer modes, but, for now, 19 * base them entirely on which videobuf2 options have been selected. 20 */ 21 #if IS_ENABLED(CONFIG_VIDEOBUF2_VMALLOC) 22 #define MCAM_MODE_VMALLOC 1 23 #endif 24 25 #if IS_ENABLED(CONFIG_VIDEOBUF2_DMA_CONTIG) 26 #define MCAM_MODE_DMA_CONTIG 1 27 #endif 28 29 #if IS_ENABLED(CONFIG_VIDEOBUF2_DMA_SG) 30 #define MCAM_MODE_DMA_SG 1 31 #endif 32 33 #if !defined(MCAM_MODE_VMALLOC) && !defined(MCAM_MODE_DMA_CONTIG) && \ 34 !defined(MCAM_MODE_DMA_SG) 35 #error One of the vb2 buffer modes must be selected in the config 36 #endif 37 38 39 enum mcam_state { 40 S_NOTREADY, /* Not yet initialized */ 41 S_IDLE, /* Just hanging around */ 42 S_FLAKED, /* Some sort of problem */ 43 S_STREAMING, /* Streaming data */ 44 S_BUFWAIT /* streaming requested but no buffers yet */ 45 }; 46 #define MAX_DMA_BUFS 3 47 48 /* 49 * Different platforms work best with different buffer modes, so we 50 * let the platform pick. 51 */ 52 enum mcam_buffer_mode { 53 B_vmalloc = 0, 54 B_DMA_contig = 1, 55 B_DMA_sg = 2 56 }; 57 58 enum mcam_chip_id { 59 MCAM_CAFE, 60 MCAM_ARMADA610, 61 }; 62 63 /* 64 * Is a given buffer mode supported by the current kernel configuration? 65 */ 66 static inline int mcam_buffer_mode_supported(enum mcam_buffer_mode mode) 67 { 68 switch (mode) { 69 #ifdef MCAM_MODE_VMALLOC 70 case B_vmalloc: 71 #endif 72 #ifdef MCAM_MODE_DMA_CONTIG 73 case B_DMA_contig: 74 #endif 75 #ifdef MCAM_MODE_DMA_SG 76 case B_DMA_sg: 77 #endif 78 return 1; 79 default: 80 return 0; 81 } 82 } 83 84 /* 85 * Basic frame states 86 */ 87 struct mcam_frame_state { 88 unsigned int frames; 89 unsigned int singles; 90 unsigned int delivered; 91 }; 92 93 #define NR_MCAM_CLK 3 94 95 /* 96 * A description of one of our devices. 97 * Locking: controlled by s_mutex. Certain fields, however, require 98 * the dev_lock spinlock; they are marked as such by comments. 99 * dev_lock is also required for access to device registers. 100 */ 101 struct mcam_camera { 102 /* 103 * These fields should be set by the platform code prior to 104 * calling mcam_register(). 105 */ 106 unsigned char __iomem *regs; 107 unsigned regs_size; /* size in bytes of the register space */ 108 spinlock_t dev_lock; 109 struct device *dev; /* For messages, dma alloc */ 110 enum mcam_chip_id chip_id; 111 enum mcam_buffer_mode buffer_mode; 112 113 int mclk_src; /* which clock source the mclk derives from */ 114 int mclk_div; /* Clock Divider Value for MCLK */ 115 116 enum v4l2_mbus_type bus_type; 117 /* MIPI support */ 118 /* The dphy config value, allocated in board file 119 * dphy[0]: DPHY3 120 * dphy[1]: DPHY5 121 * dphy[2]: DPHY6 122 */ 123 int *dphy; 124 bool mipi_enabled; /* flag whether mipi is enabled already */ 125 int lane; /* lane number */ 126 127 /* clock tree support */ 128 struct clk *clk[NR_MCAM_CLK]; 129 struct clk_hw mclk_hw; 130 struct clk *mclk; 131 132 /* 133 * Callbacks from the core to the platform code. 134 */ 135 int (*plat_power_up) (struct mcam_camera *cam); 136 void (*plat_power_down) (struct mcam_camera *cam); 137 void (*calc_dphy) (struct mcam_camera *cam); 138 139 /* 140 * Everything below here is private to the mcam core and 141 * should not be touched by the platform code. 142 */ 143 struct v4l2_device v4l2_dev; 144 struct v4l2_ctrl_handler ctrl_handler; 145 enum mcam_state state; 146 unsigned long flags; /* Buffer status, mainly (dev_lock) */ 147 148 struct mcam_frame_state frame_state; /* Frame state counter */ 149 /* 150 * Subsystem structures. 151 */ 152 struct video_device vdev; 153 struct v4l2_async_notifier notifier; 154 struct v4l2_subdev *sensor; 155 156 /* Videobuf2 stuff */ 157 struct vb2_queue vb_queue; 158 struct list_head buffers; /* Available frames */ 159 160 unsigned int nbufs; /* How many are alloc'd */ 161 int next_buf; /* Next to consume (dev_lock) */ 162 163 char bus_info[32]; /* querycap bus_info */ 164 165 /* DMA buffers - vmalloc mode */ 166 #ifdef MCAM_MODE_VMALLOC 167 unsigned int dma_buf_size; /* allocated size */ 168 void *dma_bufs[MAX_DMA_BUFS]; /* Internal buffer addresses */ 169 dma_addr_t dma_handles[MAX_DMA_BUFS]; /* Buffer bus addresses */ 170 struct tasklet_struct s_tasklet; 171 #endif 172 unsigned int sequence; /* Frame sequence number */ 173 unsigned int buf_seq[MAX_DMA_BUFS]; /* Sequence for individual bufs */ 174 175 /* DMA buffers - DMA modes */ 176 struct mcam_vb_buffer *vb_bufs[MAX_DMA_BUFS]; 177 178 /* Mode-specific ops, set at open time */ 179 void (*dma_setup)(struct mcam_camera *cam); 180 void (*frame_complete)(struct mcam_camera *cam, int frame); 181 182 /* Current operating parameters */ 183 struct v4l2_pix_format pix_format; 184 u32 mbus_code; 185 186 /* Locks */ 187 struct mutex s_mutex; /* Access to this structure */ 188 }; 189 190 191 /* 192 * Register I/O functions. These are here because the platform code 193 * may legitimately need to mess with the register space. 194 */ 195 /* 196 * Device register I/O 197 */ 198 static inline void mcam_reg_write(struct mcam_camera *cam, unsigned int reg, 199 unsigned int val) 200 { 201 iowrite32(val, cam->regs + reg); 202 } 203 204 static inline unsigned int mcam_reg_read(struct mcam_camera *cam, 205 unsigned int reg) 206 { 207 return ioread32(cam->regs + reg); 208 } 209 210 211 static inline void mcam_reg_write_mask(struct mcam_camera *cam, unsigned int reg, 212 unsigned int val, unsigned int mask) 213 { 214 unsigned int v = mcam_reg_read(cam, reg); 215 216 v = (v & ~mask) | (val & mask); 217 mcam_reg_write(cam, reg, v); 218 } 219 220 static inline void mcam_reg_clear_bit(struct mcam_camera *cam, 221 unsigned int reg, unsigned int val) 222 { 223 mcam_reg_write_mask(cam, reg, 0, val); 224 } 225 226 static inline void mcam_reg_set_bit(struct mcam_camera *cam, 227 unsigned int reg, unsigned int val) 228 { 229 mcam_reg_write_mask(cam, reg, val, val); 230 } 231 232 /* 233 * Functions for use by platform code. 234 */ 235 int mccic_register(struct mcam_camera *cam); 236 int mccic_irq(struct mcam_camera *cam, unsigned int irqs); 237 void mccic_shutdown(struct mcam_camera *cam); 238 void mccic_suspend(struct mcam_camera *cam); 239 int mccic_resume(struct mcam_camera *cam); 240 241 /* 242 * Register definitions for the m88alp01 camera interface. Offsets in bytes 243 * as given in the spec. 244 */ 245 #define REG_Y0BAR 0x00 246 #define REG_Y1BAR 0x04 247 #define REG_Y2BAR 0x08 248 #define REG_U0BAR 0x0c 249 #define REG_U1BAR 0x10 250 #define REG_U2BAR 0x14 251 #define REG_V0BAR 0x18 252 #define REG_V1BAR 0x1C 253 #define REG_V2BAR 0x20 254 255 /* 256 * register definitions for MIPI support 257 */ 258 #define REG_CSI2_CTRL0 0x100 259 #define CSI2_C0_MIPI_EN (0x1 << 0) 260 #define CSI2_C0_ACT_LANE(n) ((n-1) << 1) 261 #define REG_CSI2_DPHY3 0x12c 262 #define REG_CSI2_DPHY5 0x134 263 #define REG_CSI2_DPHY6 0x138 264 265 /* ... */ 266 267 #define REG_IMGPITCH 0x24 /* Image pitch register */ 268 #define IMGP_YP_SHFT 2 /* Y pitch params */ 269 #define IMGP_YP_MASK 0x00003ffc /* Y pitch field */ 270 #define IMGP_UVP_SHFT 18 /* UV pitch (planar) */ 271 #define IMGP_UVP_MASK 0x3ffc0000 272 #define REG_IRQSTATRAW 0x28 /* RAW IRQ Status */ 273 #define IRQ_EOF0 0x00000001 /* End of frame 0 */ 274 #define IRQ_EOF1 0x00000002 /* End of frame 1 */ 275 #define IRQ_EOF2 0x00000004 /* End of frame 2 */ 276 #define IRQ_SOF0 0x00000008 /* Start of frame 0 */ 277 #define IRQ_SOF1 0x00000010 /* Start of frame 1 */ 278 #define IRQ_SOF2 0x00000020 /* Start of frame 2 */ 279 #define IRQ_OVERFLOW 0x00000040 /* FIFO overflow */ 280 #define IRQ_TWSIW 0x00010000 /* TWSI (smbus) write */ 281 #define IRQ_TWSIR 0x00020000 /* TWSI read */ 282 #define IRQ_TWSIE 0x00040000 /* TWSI error */ 283 #define TWSIIRQS (IRQ_TWSIW|IRQ_TWSIR|IRQ_TWSIE) 284 #define FRAMEIRQS (IRQ_EOF0|IRQ_EOF1|IRQ_EOF2|IRQ_SOF0|IRQ_SOF1|IRQ_SOF2) 285 #define ALLIRQS (TWSIIRQS|FRAMEIRQS|IRQ_OVERFLOW) 286 #define REG_IRQMASK 0x2c /* IRQ mask - same bits as IRQSTAT */ 287 #define REG_IRQSTAT 0x30 /* IRQ status / clear */ 288 289 #define REG_IMGSIZE 0x34 /* Image size */ 290 #define IMGSZ_V_MASK 0x1fff0000 291 #define IMGSZ_V_SHIFT 16 292 #define IMGSZ_H_MASK 0x00003fff 293 #define REG_IMGOFFSET 0x38 /* IMage offset */ 294 295 #define REG_CTRL0 0x3c /* Control 0 */ 296 #define C0_ENABLE 0x00000001 /* Makes the whole thing go */ 297 298 /* Mask for all the format bits */ 299 #define C0_DF_MASK 0x00fffffc /* Bits 2-23 */ 300 301 /* RGB ordering */ 302 #define C0_RGB4_RGBX 0x00000000 303 #define C0_RGB4_XRGB 0x00000004 304 #define C0_RGB4_BGRX 0x00000008 305 #define C0_RGB4_XBGR 0x0000000c 306 #define C0_RGB5_RGGB 0x00000000 307 #define C0_RGB5_GRBG 0x00000004 308 #define C0_RGB5_GBRG 0x00000008 309 #define C0_RGB5_BGGR 0x0000000c 310 311 /* Spec has two fields for DIN and DOUT, but they must match, so 312 combine them here. */ 313 #define C0_DF_YUV 0x00000000 /* Data is YUV */ 314 #define C0_DF_RGB 0x000000a0 /* ... RGB */ 315 #define C0_DF_BAYER 0x00000140 /* ... Bayer */ 316 /* 8-8-8 must be missing from the below - ask */ 317 #define C0_RGBF_565 0x00000000 318 #define C0_RGBF_444 0x00000800 319 #define C0_RGB_BGR 0x00001000 /* Blue comes first */ 320 #define C0_YUV_PLANAR 0x00000000 /* YUV 422 planar format */ 321 #define C0_YUV_PACKED 0x00008000 /* YUV 422 packed */ 322 #define C0_YUV_420PL 0x0000a000 /* YUV 420 planar */ 323 /* Think that 420 packed must be 111 - ask */ 324 #define C0_YUVE_YUYV 0x00000000 /* Y1CbY0Cr */ 325 #define C0_YUVE_YVYU 0x00010000 /* Y1CrY0Cb */ 326 #define C0_YUVE_VYUY 0x00020000 /* CrY1CbY0 */ 327 #define C0_YUVE_UYVY 0x00030000 /* CbY1CrY0 */ 328 #define C0_YUVE_NOSWAP 0x00000000 /* no bytes swapping */ 329 #define C0_YUVE_SWAP13 0x00010000 /* swap byte 1 and 3 */ 330 #define C0_YUVE_SWAP24 0x00020000 /* swap byte 2 and 4 */ 331 #define C0_YUVE_SWAP1324 0x00030000 /* swap bytes 1&3 and 2&4 */ 332 /* Bayer bits 18,19 if needed */ 333 #define C0_EOF_VSYNC 0x00400000 /* Generate EOF by VSYNC */ 334 #define C0_VEDGE_CTRL 0x00800000 /* Detect falling edge of VSYNC */ 335 #define C0_HPOL_LOW 0x01000000 /* HSYNC polarity active low */ 336 #define C0_VPOL_LOW 0x02000000 /* VSYNC polarity active low */ 337 #define C0_VCLK_LOW 0x04000000 /* VCLK on falling edge */ 338 #define C0_DOWNSCALE 0x08000000 /* Enable downscaler */ 339 /* SIFMODE */ 340 #define C0_SIF_HVSYNC 0x00000000 /* Use H/VSYNC */ 341 #define C0_SOF_NOSYNC 0x40000000 /* Use inband active signaling */ 342 #define C0_SIFM_MASK 0xc0000000 /* SIF mode bits */ 343 344 /* Bits below C1_444ALPHA are not present in Cafe */ 345 #define REG_CTRL1 0x40 /* Control 1 */ 346 #define C1_CLKGATE 0x00000001 /* Sensor clock gate */ 347 #define C1_DESC_ENA 0x00000100 /* DMA descriptor enable */ 348 #define C1_DESC_3WORD 0x00000200 /* Three-word descriptors used */ 349 #define C1_444ALPHA 0x00f00000 /* Alpha field in RGB444 */ 350 #define C1_ALPHA_SHFT 20 351 #define C1_DMAB32 0x00000000 /* 32-byte DMA burst */ 352 #define C1_DMAB16 0x02000000 /* 16-byte DMA burst */ 353 #define C1_DMAB64 0x04000000 /* 64-byte DMA burst */ 354 #define C1_DMAB_MASK 0x06000000 355 #define C1_TWOBUFS 0x08000000 /* Use only two DMA buffers */ 356 #define C1_PWRDWN 0x10000000 /* Power down */ 357 358 #define REG_CLKCTRL 0x88 /* Clock control */ 359 #define CLK_DIV_MASK 0x0000ffff /* Upper bits RW "reserved" */ 360 361 /* This appears to be a Cafe-only register */ 362 #define REG_UBAR 0xc4 /* Upper base address register */ 363 364 /* Armada 610 DMA descriptor registers */ 365 #define REG_DMA_DESC_Y 0x200 366 #define REG_DMA_DESC_U 0x204 367 #define REG_DMA_DESC_V 0x208 368 #define REG_DESC_LEN_Y 0x20c /* Lengths are in bytes */ 369 #define REG_DESC_LEN_U 0x210 370 #define REG_DESC_LEN_V 0x214 371 372 /* 373 * Useful stuff that probably belongs somewhere global. 374 */ 375 #define VGA_WIDTH 640 376 #define VGA_HEIGHT 480 377 378 #endif /* _MCAM_CORE_H */ 379