xref: /linux/drivers/media/pci/zoran/zoran_device.c (revision 0d456bad36d42d16022be045c8a53ddbb59ee478)
1 /*
2  * Zoran zr36057/zr36067 PCI controller driver, for the
3  * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux
4  * Media Labs LML33/LML33R10.
5  *
6  * This part handles device access (PCI/I2C/codec/...)
7  *
8  * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
9  *
10  * Currently maintained by:
11  *   Ronald Bultje    <rbultje@ronald.bitfreak.net>
12  *   Laurent Pinchart <laurent.pinchart@skynet.be>
13  *   Mailinglist      <mjpeg-users@lists.sf.net>
14  *
15  * This program is free software; you can redistribute it and/or modify
16  * it under the terms of the GNU General Public License as published by
17  * the Free Software Foundation; either version 2 of the License, or
18  * (at your option) any later version.
19  *
20  * This program is distributed in the hope that it will be useful,
21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
23  * GNU General Public License for more details.
24  *
25  * You should have received a copy of the GNU General Public License
26  * along with this program; if not, write to the Free Software
27  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
28  */
29 
30 #include <linux/types.h>
31 #include <linux/kernel.h>
32 #include <linux/module.h>
33 #include <linux/vmalloc.h>
34 
35 #include <linux/interrupt.h>
36 #include <linux/proc_fs.h>
37 #include <linux/i2c.h>
38 #include <linux/i2c-algo-bit.h>
39 #include <linux/videodev2.h>
40 #include <media/v4l2-common.h>
41 #include <linux/spinlock.h>
42 #include <linux/sem.h>
43 
44 #include <linux/pci.h>
45 #include <linux/delay.h>
46 #include <linux/wait.h>
47 
48 #include <asm/byteorder.h>
49 #include <asm/io.h>
50 
51 #include "videocodec.h"
52 #include "zoran.h"
53 #include "zoran_device.h"
54 #include "zoran_card.h"
55 
56 #define IRQ_MASK ( ZR36057_ISR_GIRQ0 | \
57 		   ZR36057_ISR_GIRQ1 | \
58 		   ZR36057_ISR_JPEGRepIRQ )
59 
60 static bool lml33dpath;		/* default = 0
61 				 * 1 will use digital path in capture
62 				 * mode instead of analog. It can be
63 				 * used for picture adjustments using
64 				 * tool like xawtv while watching image
65 				 * on TV monitor connected to the output.
66 				 * However, due to absence of 75 Ohm
67 				 * load on Bt819 input, there will be
68 				 * some image imperfections */
69 
70 module_param(lml33dpath, bool, 0644);
71 MODULE_PARM_DESC(lml33dpath,
72 		 "Use digital path capture mode (on LML33 cards)");
73 
74 static void
75 zr36057_init_vfe (struct zoran *zr);
76 
77 /*
78  * General Purpose I/O and Guest bus access
79  */
80 
81 /*
82  * This is a bit tricky. When a board lacks a GPIO function, the corresponding
83  * GPIO bit number in the card_info structure is set to 0.
84  */
85 
86 void
87 GPIO (struct zoran *zr,
88       int           bit,
89       unsigned int  value)
90 {
91 	u32 reg;
92 	u32 mask;
93 
94 	/* Make sure the bit number is legal
95 	 * A bit number of -1 (lacking) gives a mask of 0,
96 	 * making it harmless */
97 	mask = (1 << (24 + bit)) & 0xff000000;
98 	reg = btread(ZR36057_GPPGCR1) & ~mask;
99 	if (value) {
100 		reg |= mask;
101 	}
102 	btwrite(reg, ZR36057_GPPGCR1);
103 	udelay(1);
104 }
105 
106 /*
107  * Wait til post office is no longer busy
108  */
109 
110 int
111 post_office_wait (struct zoran *zr)
112 {
113 	u32 por;
114 
115 //      while (((por = btread(ZR36057_POR)) & (ZR36057_POR_POPen | ZR36057_POR_POTime)) == ZR36057_POR_POPen) {
116 	while ((por = btread(ZR36057_POR)) & ZR36057_POR_POPen) {
117 		/* wait for something to happen */
118 	}
119 	if ((por & ZR36057_POR_POTime) && !zr->card.gws_not_connected) {
120 		/* In LML33/BUZ \GWS line is not connected, so it has always timeout set */
121 		dprintk(1, KERN_INFO "%s: pop timeout %08x\n", ZR_DEVNAME(zr),
122 			por);
123 		return -1;
124 	}
125 
126 	return 0;
127 }
128 
129 int
130 post_office_write (struct zoran *zr,
131 		   unsigned int  guest,
132 		   unsigned int  reg,
133 		   unsigned int  value)
134 {
135 	u32 por;
136 
137 	por =
138 	    ZR36057_POR_PODir | ZR36057_POR_POTime | ((guest & 7) << 20) |
139 	    ((reg & 7) << 16) | (value & 0xFF);
140 	btwrite(por, ZR36057_POR);
141 
142 	return post_office_wait(zr);
143 }
144 
145 int
146 post_office_read (struct zoran *zr,
147 		  unsigned int  guest,
148 		  unsigned int  reg)
149 {
150 	u32 por;
151 
152 	por = ZR36057_POR_POTime | ((guest & 7) << 20) | ((reg & 7) << 16);
153 	btwrite(por, ZR36057_POR);
154 	if (post_office_wait(zr) < 0) {
155 		return -1;
156 	}
157 
158 	return btread(ZR36057_POR) & 0xFF;
159 }
160 
161 /*
162  * detect guests
163  */
164 
165 static void
166 dump_guests (struct zoran *zr)
167 {
168 	if (zr36067_debug > 2) {
169 		int i, guest[8];
170 
171 		for (i = 1; i < 8; i++) {	// Don't read jpeg codec here
172 			guest[i] = post_office_read(zr, i, 0);
173 		}
174 
175 		printk(KERN_INFO "%s: Guests:", ZR_DEVNAME(zr));
176 
177 		for (i = 1; i < 8; i++) {
178 			printk(" 0x%02x", guest[i]);
179 		}
180 		printk("\n");
181 	}
182 }
183 
184 static inline unsigned long
185 get_time (void)
186 {
187 	struct timeval tv;
188 
189 	do_gettimeofday(&tv);
190 	return (1000000 * tv.tv_sec + tv.tv_usec);
191 }
192 
193 void
194 detect_guest_activity (struct zoran *zr)
195 {
196 	int timeout, i, j, res, guest[8], guest0[8], change[8][3];
197 	unsigned long t0, t1;
198 
199 	dump_guests(zr);
200 	printk(KERN_INFO "%s: Detecting guests activity, please wait...\n",
201 	       ZR_DEVNAME(zr));
202 	for (i = 1; i < 8; i++) {	// Don't read jpeg codec here
203 		guest0[i] = guest[i] = post_office_read(zr, i, 0);
204 	}
205 
206 	timeout = 0;
207 	j = 0;
208 	t0 = get_time();
209 	while (timeout < 10000) {
210 		udelay(10);
211 		timeout++;
212 		for (i = 1; (i < 8) && (j < 8); i++) {
213 			res = post_office_read(zr, i, 0);
214 			if (res != guest[i]) {
215 				t1 = get_time();
216 				change[j][0] = (t1 - t0);
217 				t0 = t1;
218 				change[j][1] = i;
219 				change[j][2] = res;
220 				j++;
221 				guest[i] = res;
222 			}
223 		}
224 		if (j >= 8)
225 			break;
226 	}
227 	printk(KERN_INFO "%s: Guests:", ZR_DEVNAME(zr));
228 
229 	for (i = 1; i < 8; i++) {
230 		printk(" 0x%02x", guest0[i]);
231 	}
232 	printk("\n");
233 	if (j == 0) {
234 		printk(KERN_INFO "%s: No activity detected.\n", ZR_DEVNAME(zr));
235 		return;
236 	}
237 	for (i = 0; i < j; i++) {
238 		printk(KERN_INFO "%s: %6d: %d => 0x%02x\n", ZR_DEVNAME(zr),
239 		       change[i][0], change[i][1], change[i][2]);
240 	}
241 }
242 
243 /*
244  * JPEG Codec access
245  */
246 
247 void
248 jpeg_codec_sleep (struct zoran *zr,
249 		  int           sleep)
250 {
251 	GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_SLEEP], !sleep);
252 	if (!sleep) {
253 		dprintk(3,
254 			KERN_DEBUG
255 			"%s: jpeg_codec_sleep() - wake GPIO=0x%08x\n",
256 			ZR_DEVNAME(zr), btread(ZR36057_GPPGCR1));
257 		udelay(500);
258 	} else {
259 		dprintk(3,
260 			KERN_DEBUG
261 			"%s: jpeg_codec_sleep() - sleep GPIO=0x%08x\n",
262 			ZR_DEVNAME(zr), btread(ZR36057_GPPGCR1));
263 		udelay(2);
264 	}
265 }
266 
267 int
268 jpeg_codec_reset (struct zoran *zr)
269 {
270 	/* Take the codec out of sleep */
271 	jpeg_codec_sleep(zr, 0);
272 
273 	if (zr->card.gpcs[GPCS_JPEG_RESET] != 0xff) {
274 		post_office_write(zr, zr->card.gpcs[GPCS_JPEG_RESET], 0,
275 				  0);
276 		udelay(2);
277 	} else {
278 		GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_RESET], 0);
279 		udelay(2);
280 		GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_RESET], 1);
281 		udelay(2);
282 	}
283 
284 	return 0;
285 }
286 
287 /*
288  *   Set the registers for the size we have specified. Don't bother
289  *   trying to understand this without the ZR36057 manual in front of
290  *   you [AC].
291  *
292  *   PS: The manual is free for download in .pdf format from
293  *   www.zoran.com - nicely done those folks.
294  */
295 
296 static void
297 zr36057_adjust_vfe (struct zoran          *zr,
298 		    enum zoran_codec_mode  mode)
299 {
300 	u32 reg;
301 
302 	switch (mode) {
303 	case BUZ_MODE_MOTION_DECOMPRESS:
304 		btand(~ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR);
305 		reg = btread(ZR36057_VFEHCR);
306 		if ((reg & (1 << 10)) && zr->card.type != LML33R10) {
307 			reg += ((1 << 10) | 1);
308 		}
309 		btwrite(reg, ZR36057_VFEHCR);
310 		break;
311 	case BUZ_MODE_MOTION_COMPRESS:
312 	case BUZ_MODE_IDLE:
313 	default:
314 		if ((zr->norm & V4L2_STD_NTSC) ||
315 		    (zr->card.type == LML33R10 &&
316 		     (zr->norm & V4L2_STD_PAL)))
317 			btand(~ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR);
318 		else
319 			btor(ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR);
320 		reg = btread(ZR36057_VFEHCR);
321 		if (!(reg & (1 << 10)) && zr->card.type != LML33R10) {
322 			reg -= ((1 << 10) | 1);
323 		}
324 		btwrite(reg, ZR36057_VFEHCR);
325 		break;
326 	}
327 }
328 
329 /*
330  * set geometry
331  */
332 
333 static void
334 zr36057_set_vfe (struct zoran              *zr,
335 		 int                        video_width,
336 		 int                        video_height,
337 		 const struct zoran_format *format)
338 {
339 	struct tvnorm *tvn;
340 	unsigned HStart, HEnd, VStart, VEnd;
341 	unsigned DispMode;
342 	unsigned VidWinWid, VidWinHt;
343 	unsigned hcrop1, hcrop2, vcrop1, vcrop2;
344 	unsigned Wa, We, Ha, He;
345 	unsigned X, Y, HorDcm, VerDcm;
346 	u32 reg;
347 	unsigned mask_line_size;
348 
349 	tvn = zr->timing;
350 
351 	Wa = tvn->Wa;
352 	Ha = tvn->Ha;
353 
354 	dprintk(2, KERN_INFO "%s: set_vfe() - width = %d, height = %d\n",
355 		ZR_DEVNAME(zr), video_width, video_height);
356 
357 	if (video_width < BUZ_MIN_WIDTH ||
358 	    video_height < BUZ_MIN_HEIGHT ||
359 	    video_width > Wa || video_height > Ha) {
360 		dprintk(1, KERN_ERR "%s: set_vfe: w=%d h=%d not valid\n",
361 			ZR_DEVNAME(zr), video_width, video_height);
362 		return;
363 	}
364 
365 	/**** zr36057 ****/
366 
367 	/* horizontal */
368 	VidWinWid = video_width;
369 	X = DIV_ROUND_UP(VidWinWid * 64, tvn->Wa);
370 	We = (VidWinWid * 64) / X;
371 	HorDcm = 64 - X;
372 	hcrop1 = 2 * ((tvn->Wa - We) / 4);
373 	hcrop2 = tvn->Wa - We - hcrop1;
374 	HStart = tvn->HStart ? tvn->HStart : 1;
375 	/* (Ronald) Original comment:
376 	 * "| 1 Doesn't have any effect, tested on both a DC10 and a DC10+"
377 	 * this is false. It inverses chroma values on the LML33R10 (so Cr
378 	 * suddenly is shown as Cb and reverse, really cool effect if you
379 	 * want to see blue faces, not useful otherwise). So don't use |1.
380 	 * However, the DC10 has '0' as HStart, but does need |1, so we
381 	 * use a dirty check...
382 	 */
383 	HEnd = HStart + tvn->Wa - 1;
384 	HStart += hcrop1;
385 	HEnd -= hcrop2;
386 	reg = ((HStart & ZR36057_VFEHCR_Hmask) << ZR36057_VFEHCR_HStart)
387 	    | ((HEnd & ZR36057_VFEHCR_Hmask) << ZR36057_VFEHCR_HEnd);
388 	if (zr->card.vfe_pol.hsync_pol)
389 		reg |= ZR36057_VFEHCR_HSPol;
390 	btwrite(reg, ZR36057_VFEHCR);
391 
392 	/* Vertical */
393 	DispMode = !(video_height > BUZ_MAX_HEIGHT / 2);
394 	VidWinHt = DispMode ? video_height : video_height / 2;
395 	Y = DIV_ROUND_UP(VidWinHt * 64 * 2, tvn->Ha);
396 	He = (VidWinHt * 64) / Y;
397 	VerDcm = 64 - Y;
398 	vcrop1 = (tvn->Ha / 2 - He) / 2;
399 	vcrop2 = tvn->Ha / 2 - He - vcrop1;
400 	VStart = tvn->VStart;
401 	VEnd = VStart + tvn->Ha / 2;	// - 1; FIXME SnapShot times out with -1 in 768*576 on the DC10 - LP
402 	VStart += vcrop1;
403 	VEnd -= vcrop2;
404 	reg = ((VStart & ZR36057_VFEVCR_Vmask) << ZR36057_VFEVCR_VStart)
405 	    | ((VEnd & ZR36057_VFEVCR_Vmask) << ZR36057_VFEVCR_VEnd);
406 	if (zr->card.vfe_pol.vsync_pol)
407 		reg |= ZR36057_VFEVCR_VSPol;
408 	btwrite(reg, ZR36057_VFEVCR);
409 
410 	/* scaler and pixel format */
411 	reg = 0;
412 	reg |= (HorDcm << ZR36057_VFESPFR_HorDcm);
413 	reg |= (VerDcm << ZR36057_VFESPFR_VerDcm);
414 	reg |= (DispMode << ZR36057_VFESPFR_DispMode);
415 	/* RJ: I don't know, why the following has to be the opposite
416 	 * of the corresponding ZR36060 setting, but only this way
417 	 * we get the correct colors when uncompressing to the screen  */
418 	//reg |= ZR36057_VFESPFR_VCLKPol; /**/
419 	/* RJ: Don't know if that is needed for NTSC also */
420 	if (!(zr->norm & V4L2_STD_NTSC))
421 		reg |= ZR36057_VFESPFR_ExtFl;	// NEEDED!!!!!!! Wolfgang
422 	reg |= ZR36057_VFESPFR_TopField;
423 	if (HorDcm >= 48) {
424 		reg |= 3 << ZR36057_VFESPFR_HFilter;	/* 5 tap filter */
425 	} else if (HorDcm >= 32) {
426 		reg |= 2 << ZR36057_VFESPFR_HFilter;	/* 4 tap filter */
427 	} else if (HorDcm >= 16) {
428 		reg |= 1 << ZR36057_VFESPFR_HFilter;	/* 3 tap filter */
429 	}
430 	reg |= format->vfespfr;
431 	btwrite(reg, ZR36057_VFESPFR);
432 
433 	/* display configuration */
434 	reg = (16 << ZR36057_VDCR_MinPix)
435 	    | (VidWinHt << ZR36057_VDCR_VidWinHt)
436 	    | (VidWinWid << ZR36057_VDCR_VidWinWid);
437 	if (pci_pci_problems & PCIPCI_TRITON)
438 		// || zr->revision < 1) // Revision 1 has also Triton support
439 		reg &= ~ZR36057_VDCR_Triton;
440 	else
441 		reg |= ZR36057_VDCR_Triton;
442 	btwrite(reg, ZR36057_VDCR);
443 
444 	/* (Ronald) don't write this if overlay_mask = NULL */
445 	if (zr->overlay_mask) {
446 		/* Write overlay clipping mask data, but don't enable overlay clipping */
447 		/* RJ: since this makes only sense on the screen, we use
448 		 * zr->overlay_settings.width instead of video_width */
449 
450 		mask_line_size = (BUZ_MAX_WIDTH + 31) / 32;
451 		reg = virt_to_bus(zr->overlay_mask);
452 		btwrite(reg, ZR36057_MMTR);
453 		reg = virt_to_bus(zr->overlay_mask + mask_line_size);
454 		btwrite(reg, ZR36057_MMBR);
455 		reg =
456 		    mask_line_size - (zr->overlay_settings.width +
457 				      31) / 32;
458 		if (DispMode == 0)
459 			reg += mask_line_size;
460 		reg <<= ZR36057_OCR_MaskStride;
461 		btwrite(reg, ZR36057_OCR);
462 	}
463 
464 	zr36057_adjust_vfe(zr, zr->codec_mode);
465 }
466 
467 /*
468  * Switch overlay on or off
469  */
470 
471 void
472 zr36057_overlay (struct zoran *zr,
473 		 int           on)
474 {
475 	u32 reg;
476 
477 	if (on) {
478 		/* do the necessary settings ... */
479 		btand(~ZR36057_VDCR_VidEn, ZR36057_VDCR);	/* switch it off first */
480 
481 		zr36057_set_vfe(zr,
482 				zr->overlay_settings.width,
483 				zr->overlay_settings.height,
484 				zr->overlay_settings.format);
485 
486 		/* Start and length of each line MUST be 4-byte aligned.
487 		 * This should be already checked before the call to this routine.
488 		 * All error messages are internal driver checking only! */
489 
490 		/* video display top and bottom registers */
491 		reg = (long) zr->vbuf_base +
492 		    zr->overlay_settings.x *
493 		    ((zr->overlay_settings.format->depth + 7) / 8) +
494 		    zr->overlay_settings.y *
495 		    zr->vbuf_bytesperline;
496 		btwrite(reg, ZR36057_VDTR);
497 		if (reg & 3)
498 			dprintk(1,
499 				KERN_ERR
500 				"%s: zr36057_overlay() - video_address not aligned\n",
501 				ZR_DEVNAME(zr));
502 		if (zr->overlay_settings.height > BUZ_MAX_HEIGHT / 2)
503 			reg += zr->vbuf_bytesperline;
504 		btwrite(reg, ZR36057_VDBR);
505 
506 		/* video stride, status, and frame grab register */
507 		reg = zr->vbuf_bytesperline -
508 		    zr->overlay_settings.width *
509 		    ((zr->overlay_settings.format->depth + 7) / 8);
510 		if (zr->overlay_settings.height > BUZ_MAX_HEIGHT / 2)
511 			reg += zr->vbuf_bytesperline;
512 		if (reg & 3)
513 			dprintk(1,
514 				KERN_ERR
515 				"%s: zr36057_overlay() - video_stride not aligned\n",
516 				ZR_DEVNAME(zr));
517 		reg = (reg << ZR36057_VSSFGR_DispStride);
518 		reg |= ZR36057_VSSFGR_VidOvf;	/* clear overflow status */
519 		btwrite(reg, ZR36057_VSSFGR);
520 
521 		/* Set overlay clipping */
522 		if (zr->overlay_settings.clipcount > 0)
523 			btor(ZR36057_OCR_OvlEnable, ZR36057_OCR);
524 
525 		/* ... and switch it on */
526 		btor(ZR36057_VDCR_VidEn, ZR36057_VDCR);
527 	} else {
528 		/* Switch it off */
529 		btand(~ZR36057_VDCR_VidEn, ZR36057_VDCR);
530 	}
531 }
532 
533 /*
534  * The overlay mask has one bit for each pixel on a scan line,
535  *  and the maximum window size is BUZ_MAX_WIDTH * BUZ_MAX_HEIGHT pixels.
536  */
537 
538 void write_overlay_mask(struct zoran_fh *fh, struct v4l2_clip *vp, int count)
539 {
540 	struct zoran *zr = fh->zr;
541 	unsigned mask_line_size = (BUZ_MAX_WIDTH + 31) / 32;
542 	u32 *mask;
543 	int x, y, width, height;
544 	unsigned i, j, k;
545 
546 	/* fill mask with one bits */
547 	memset(fh->overlay_mask, ~0, mask_line_size * 4 * BUZ_MAX_HEIGHT);
548 
549 	for (i = 0; i < count; ++i) {
550 		/* pick up local copy of clip */
551 		x = vp[i].c.left;
552 		y = vp[i].c.top;
553 		width = vp[i].c.width;
554 		height = vp[i].c.height;
555 
556 		/* trim clips that extend beyond the window */
557 		if (x < 0) {
558 			width += x;
559 			x = 0;
560 		}
561 		if (y < 0) {
562 			height += y;
563 			y = 0;
564 		}
565 		if (x + width > fh->overlay_settings.width) {
566 			width = fh->overlay_settings.width - x;
567 		}
568 		if (y + height > fh->overlay_settings.height) {
569 			height = fh->overlay_settings.height - y;
570 		}
571 
572 		/* ignore degenerate clips */
573 		if (height <= 0) {
574 			continue;
575 		}
576 		if (width <= 0) {
577 			continue;
578 		}
579 
580 		/* apply clip for each scan line */
581 		for (j = 0; j < height; ++j) {
582 			/* reset bit for each pixel */
583 			/* this can be optimized later if need be */
584 			mask = fh->overlay_mask + (y + j) * mask_line_size;
585 			for (k = 0; k < width; ++k) {
586 				mask[(x + k) / 32] &=
587 				    ~((u32) 1 << (x + k) % 32);
588 			}
589 		}
590 	}
591 }
592 
593 /* Enable/Disable uncompressed memory grabbing of the 36057 */
594 
595 void
596 zr36057_set_memgrab (struct zoran *zr,
597 		     int           mode)
598 {
599 	if (mode) {
600 		/* We only check SnapShot and not FrameGrab here.  SnapShot==1
601 		 * means a capture is already in progress, but FrameGrab==1
602 		 * doesn't necessary mean that.  It's more correct to say a 1
603 		 * to 0 transition indicates a capture completed.  If a
604 		 * capture is pending when capturing is tuned off, FrameGrab
605 		 * will be stuck at 1 until capturing is turned back on.
606 		 */
607 		if (btread(ZR36057_VSSFGR) & ZR36057_VSSFGR_SnapShot)
608 			dprintk(1,
609 				KERN_WARNING
610 				"%s: zr36057_set_memgrab(1) with SnapShot on!?\n",
611 				ZR_DEVNAME(zr));
612 
613 		/* switch on VSync interrupts */
614 		btwrite(IRQ_MASK, ZR36057_ISR);	// Clear Interrupts
615 		btor(zr->card.vsync_int, ZR36057_ICR);	// SW
616 
617 		/* enable SnapShot */
618 		btor(ZR36057_VSSFGR_SnapShot, ZR36057_VSSFGR);
619 
620 		/* Set zr36057 video front end  and enable video */
621 		zr36057_set_vfe(zr, zr->v4l_settings.width,
622 				zr->v4l_settings.height,
623 				zr->v4l_settings.format);
624 
625 		zr->v4l_memgrab_active = 1;
626 	} else {
627 		/* switch off VSync interrupts */
628 		btand(~zr->card.vsync_int, ZR36057_ICR);	// SW
629 
630 		zr->v4l_memgrab_active = 0;
631 		zr->v4l_grab_frame = NO_GRAB_ACTIVE;
632 
633 		/* reenable grabbing to screen if it was running */
634 		if (zr->v4l_overlay_active) {
635 			zr36057_overlay(zr, 1);
636 		} else {
637 			btand(~ZR36057_VDCR_VidEn, ZR36057_VDCR);
638 			btand(~ZR36057_VSSFGR_SnapShot, ZR36057_VSSFGR);
639 		}
640 	}
641 }
642 
643 int
644 wait_grab_pending (struct zoran *zr)
645 {
646 	unsigned long flags;
647 
648 	/* wait until all pending grabs are finished */
649 
650 	if (!zr->v4l_memgrab_active)
651 		return 0;
652 
653 	wait_event_interruptible(zr->v4l_capq,
654 			(zr->v4l_pend_tail == zr->v4l_pend_head));
655 	if (signal_pending(current))
656 		return -ERESTARTSYS;
657 
658 	spin_lock_irqsave(&zr->spinlock, flags);
659 	zr36057_set_memgrab(zr, 0);
660 	spin_unlock_irqrestore(&zr->spinlock, flags);
661 
662 	return 0;
663 }
664 
665 /*****************************************************************************
666  *                                                                           *
667  *  Set up the Buz-specific MJPEG part                                       *
668  *                                                                           *
669  *****************************************************************************/
670 
671 static inline void
672 set_frame (struct zoran *zr,
673 	   int           val)
674 {
675 	GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_FRAME], val);
676 }
677 
678 static void
679 set_videobus_dir (struct zoran *zr,
680 		  int           val)
681 {
682 	switch (zr->card.type) {
683 	case LML33:
684 	case LML33R10:
685 		if (lml33dpath == 0)
686 			GPIO(zr, 5, val);
687 		else
688 			GPIO(zr, 5, 1);
689 		break;
690 	default:
691 		GPIO(zr, zr->card.gpio[ZR_GPIO_VID_DIR],
692 		     zr->card.gpio_pol[ZR_GPIO_VID_DIR] ? !val : val);
693 		break;
694 	}
695 }
696 
697 static void
698 init_jpeg_queue (struct zoran *zr)
699 {
700 	int i;
701 
702 	/* re-initialize DMA ring stuff */
703 	zr->jpg_que_head = 0;
704 	zr->jpg_dma_head = 0;
705 	zr->jpg_dma_tail = 0;
706 	zr->jpg_que_tail = 0;
707 	zr->jpg_seq_num = 0;
708 	zr->JPEG_error = 0;
709 	zr->num_errors = 0;
710 	zr->jpg_err_seq = 0;
711 	zr->jpg_err_shift = 0;
712 	zr->jpg_queued_num = 0;
713 	for (i = 0; i < zr->jpg_buffers.num_buffers; i++) {
714 		zr->jpg_buffers.buffer[i].state = BUZ_STATE_USER;	/* nothing going on */
715 	}
716 	for (i = 0; i < BUZ_NUM_STAT_COM; i++) {
717 		zr->stat_com[i] = cpu_to_le32(1);	/* mark as unavailable to zr36057 */
718 	}
719 }
720 
721 static void
722 zr36057_set_jpg (struct zoran          *zr,
723 		 enum zoran_codec_mode  mode)
724 {
725 	struct tvnorm *tvn;
726 	u32 reg;
727 
728 	tvn = zr->timing;
729 
730 	/* assert P_Reset, disable code transfer, deassert Active */
731 	btwrite(0, ZR36057_JPC);
732 
733 	/* MJPEG compression mode */
734 	switch (mode) {
735 
736 	case BUZ_MODE_MOTION_COMPRESS:
737 	default:
738 		reg = ZR36057_JMC_MJPGCmpMode;
739 		break;
740 
741 	case BUZ_MODE_MOTION_DECOMPRESS:
742 		reg = ZR36057_JMC_MJPGExpMode;
743 		reg |= ZR36057_JMC_SyncMstr;
744 		/* RJ: The following is experimental - improves the output to screen */
745 		//if(zr->jpg_settings.VFIFO_FB) reg |= ZR36057_JMC_VFIFO_FB; // No, it doesn't. SM
746 		break;
747 
748 	case BUZ_MODE_STILL_COMPRESS:
749 		reg = ZR36057_JMC_JPGCmpMode;
750 		break;
751 
752 	case BUZ_MODE_STILL_DECOMPRESS:
753 		reg = ZR36057_JMC_JPGExpMode;
754 		break;
755 
756 	}
757 	reg |= ZR36057_JMC_JPG;
758 	if (zr->jpg_settings.field_per_buff == 1)
759 		reg |= ZR36057_JMC_Fld_per_buff;
760 	btwrite(reg, ZR36057_JMC);
761 
762 	/* vertical */
763 	btor(ZR36057_VFEVCR_VSPol, ZR36057_VFEVCR);
764 	reg = (6 << ZR36057_VSP_VsyncSize) |
765 	      (tvn->Ht << ZR36057_VSP_FrmTot);
766 	btwrite(reg, ZR36057_VSP);
767 	reg = ((zr->jpg_settings.img_y + tvn->VStart) << ZR36057_FVAP_NAY) |
768 	      (zr->jpg_settings.img_height << ZR36057_FVAP_PAY);
769 	btwrite(reg, ZR36057_FVAP);
770 
771 	/* horizontal */
772 	if (zr->card.vfe_pol.hsync_pol)
773 		btor(ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR);
774 	else
775 		btand(~ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR);
776 	reg = ((tvn->HSyncStart) << ZR36057_HSP_HsyncStart) |
777 	      (tvn->Wt << ZR36057_HSP_LineTot);
778 	btwrite(reg, ZR36057_HSP);
779 	reg = ((zr->jpg_settings.img_x +
780 		tvn->HStart + 4) << ZR36057_FHAP_NAX) |
781 	      (zr->jpg_settings.img_width << ZR36057_FHAP_PAX);
782 	btwrite(reg, ZR36057_FHAP);
783 
784 	/* field process parameters */
785 	if (zr->jpg_settings.odd_even)
786 		reg = ZR36057_FPP_Odd_Even;
787 	else
788 		reg = 0;
789 
790 	btwrite(reg, ZR36057_FPP);
791 
792 	/* Set proper VCLK Polarity, else colors will be wrong during playback */
793 	//btor(ZR36057_VFESPFR_VCLKPol, ZR36057_VFESPFR);
794 
795 	/* code base address */
796 	reg = virt_to_bus(zr->stat_com);
797 	btwrite(reg, ZR36057_JCBA);
798 
799 	/* FIFO threshold (FIFO is 160. double words) */
800 	/* NOTE: decimal values here */
801 	switch (mode) {
802 
803 	case BUZ_MODE_STILL_COMPRESS:
804 	case BUZ_MODE_MOTION_COMPRESS:
805 		if (zr->card.type != BUZ)
806 			reg = 140;
807 		else
808 			reg = 60;
809 		break;
810 
811 	case BUZ_MODE_STILL_DECOMPRESS:
812 	case BUZ_MODE_MOTION_DECOMPRESS:
813 		reg = 20;
814 		break;
815 
816 	default:
817 		reg = 80;
818 		break;
819 
820 	}
821 	btwrite(reg, ZR36057_JCFT);
822 	zr36057_adjust_vfe(zr, mode);
823 
824 }
825 
826 void
827 print_interrupts (struct zoran *zr)
828 {
829 	int res, noerr = 0;
830 
831 	printk(KERN_INFO "%s: interrupts received:", ZR_DEVNAME(zr));
832 	if ((res = zr->field_counter) < -1 || res > 1) {
833 		printk(" FD:%d", res);
834 	}
835 	if ((res = zr->intr_counter_GIRQ1) != 0) {
836 		printk(" GIRQ1:%d", res);
837 		noerr++;
838 	}
839 	if ((res = zr->intr_counter_GIRQ0) != 0) {
840 		printk(" GIRQ0:%d", res);
841 		noerr++;
842 	}
843 	if ((res = zr->intr_counter_CodRepIRQ) != 0) {
844 		printk(" CodRepIRQ:%d", res);
845 		noerr++;
846 	}
847 	if ((res = zr->intr_counter_JPEGRepIRQ) != 0) {
848 		printk(" JPEGRepIRQ:%d", res);
849 		noerr++;
850 	}
851 	if (zr->JPEG_max_missed) {
852 		printk(" JPEG delays: max=%d min=%d", zr->JPEG_max_missed,
853 		       zr->JPEG_min_missed);
854 	}
855 	if (zr->END_event_missed) {
856 		printk(" ENDs missed: %d", zr->END_event_missed);
857 	}
858 	//if (zr->jpg_queued_num) {
859 	printk(" queue_state=%ld/%ld/%ld/%ld", zr->jpg_que_tail,
860 	       zr->jpg_dma_tail, zr->jpg_dma_head, zr->jpg_que_head);
861 	//}
862 	if (!noerr) {
863 		printk(": no interrupts detected.");
864 	}
865 	printk("\n");
866 }
867 
868 void
869 clear_interrupt_counters (struct zoran *zr)
870 {
871 	zr->intr_counter_GIRQ1 = 0;
872 	zr->intr_counter_GIRQ0 = 0;
873 	zr->intr_counter_CodRepIRQ = 0;
874 	zr->intr_counter_JPEGRepIRQ = 0;
875 	zr->field_counter = 0;
876 	zr->IRQ1_in = 0;
877 	zr->IRQ1_out = 0;
878 	zr->JPEG_in = 0;
879 	zr->JPEG_out = 0;
880 	zr->JPEG_0 = 0;
881 	zr->JPEG_1 = 0;
882 	zr->END_event_missed = 0;
883 	zr->JPEG_missed = 0;
884 	zr->JPEG_max_missed = 0;
885 	zr->JPEG_min_missed = 0x7fffffff;
886 }
887 
888 static u32
889 count_reset_interrupt (struct zoran *zr)
890 {
891 	u32 isr;
892 
893 	if ((isr = btread(ZR36057_ISR) & 0x78000000)) {
894 		if (isr & ZR36057_ISR_GIRQ1) {
895 			btwrite(ZR36057_ISR_GIRQ1, ZR36057_ISR);
896 			zr->intr_counter_GIRQ1++;
897 		}
898 		if (isr & ZR36057_ISR_GIRQ0) {
899 			btwrite(ZR36057_ISR_GIRQ0, ZR36057_ISR);
900 			zr->intr_counter_GIRQ0++;
901 		}
902 		if (isr & ZR36057_ISR_CodRepIRQ) {
903 			btwrite(ZR36057_ISR_CodRepIRQ, ZR36057_ISR);
904 			zr->intr_counter_CodRepIRQ++;
905 		}
906 		if (isr & ZR36057_ISR_JPEGRepIRQ) {
907 			btwrite(ZR36057_ISR_JPEGRepIRQ, ZR36057_ISR);
908 			zr->intr_counter_JPEGRepIRQ++;
909 		}
910 	}
911 	return isr;
912 }
913 
914 void
915 jpeg_start (struct zoran *zr)
916 {
917 	int reg;
918 
919 	zr->frame_num = 0;
920 
921 	/* deassert P_reset, disable code transfer, deassert Active */
922 	btwrite(ZR36057_JPC_P_Reset, ZR36057_JPC);
923 	/* stop flushing the internal code buffer */
924 	btand(~ZR36057_MCTCR_CFlush, ZR36057_MCTCR);
925 	/* enable code transfer */
926 	btor(ZR36057_JPC_CodTrnsEn, ZR36057_JPC);
927 
928 	/* clear IRQs */
929 	btwrite(IRQ_MASK, ZR36057_ISR);
930 	/* enable the JPEG IRQs */
931 	btwrite(zr->card.jpeg_int |
932 			ZR36057_ICR_JPEGRepIRQ |
933 			ZR36057_ICR_IntPinEn,
934 		ZR36057_ICR);
935 
936 	set_frame(zr, 0);	// \FRAME
937 
938 	/* set the JPEG codec guest ID */
939 	reg = (zr->card.gpcs[1] << ZR36057_JCGI_JPEGuestID) |
940 	       (0 << ZR36057_JCGI_JPEGuestReg);
941 	btwrite(reg, ZR36057_JCGI);
942 
943 	if (zr->card.video_vfe == CODEC_TYPE_ZR36016 &&
944 	    zr->card.video_codec == CODEC_TYPE_ZR36050) {
945 		/* Enable processing on the ZR36016 */
946 		if (zr->vfe)
947 			zr36016_write(zr->vfe, 0, 1);
948 
949 		/* load the address of the GO register in the ZR36050 latch */
950 		post_office_write(zr, 0, 0, 0);
951 	}
952 
953 	/* assert Active */
954 	btor(ZR36057_JPC_Active, ZR36057_JPC);
955 
956 	/* enable the Go generation */
957 	btor(ZR36057_JMC_Go_en, ZR36057_JMC);
958 	udelay(30);
959 
960 	set_frame(zr, 1);	// /FRAME
961 
962 	dprintk(3, KERN_DEBUG "%s: jpeg_start\n", ZR_DEVNAME(zr));
963 }
964 
965 void
966 zr36057_enable_jpg (struct zoran          *zr,
967 		    enum zoran_codec_mode  mode)
968 {
969 	struct vfe_settings cap;
970 	int field_size =
971 	    zr->jpg_buffers.buffer_size / zr->jpg_settings.field_per_buff;
972 
973 	zr->codec_mode = mode;
974 
975 	cap.x = zr->jpg_settings.img_x;
976 	cap.y = zr->jpg_settings.img_y;
977 	cap.width = zr->jpg_settings.img_width;
978 	cap.height = zr->jpg_settings.img_height;
979 	cap.decimation =
980 	    zr->jpg_settings.HorDcm | (zr->jpg_settings.VerDcm << 8);
981 	cap.quality = zr->jpg_settings.jpg_comp.quality;
982 
983 	switch (mode) {
984 
985 	case BUZ_MODE_MOTION_COMPRESS: {
986 		struct jpeg_app_marker app;
987 		struct jpeg_com_marker com;
988 
989 		/* In motion compress mode, the decoder output must be enabled, and
990 		 * the video bus direction set to input.
991 		 */
992 		set_videobus_dir(zr, 0);
993 		decoder_call(zr, video, s_stream, 1);
994 		encoder_call(zr, video, s_routing, 0, 0, 0);
995 
996 		/* Take the JPEG codec and the VFE out of sleep */
997 		jpeg_codec_sleep(zr, 0);
998 
999 		/* set JPEG app/com marker */
1000 		app.appn = zr->jpg_settings.jpg_comp.APPn;
1001 		app.len = zr->jpg_settings.jpg_comp.APP_len;
1002 		memcpy(app.data, zr->jpg_settings.jpg_comp.APP_data, 60);
1003 		zr->codec->control(zr->codec, CODEC_S_JPEG_APP_DATA,
1004 				   sizeof(struct jpeg_app_marker), &app);
1005 
1006 		com.len = zr->jpg_settings.jpg_comp.COM_len;
1007 		memcpy(com.data, zr->jpg_settings.jpg_comp.COM_data, 60);
1008 		zr->codec->control(zr->codec, CODEC_S_JPEG_COM_DATA,
1009 				   sizeof(struct jpeg_com_marker), &com);
1010 
1011 		/* Setup the JPEG codec */
1012 		zr->codec->control(zr->codec, CODEC_S_JPEG_TDS_BYTE,
1013 				   sizeof(int), &field_size);
1014 		zr->codec->set_video(zr->codec, zr->timing, &cap,
1015 				     &zr->card.vfe_pol);
1016 		zr->codec->set_mode(zr->codec, CODEC_DO_COMPRESSION);
1017 
1018 		/* Setup the VFE */
1019 		if (zr->vfe) {
1020 			zr->vfe->control(zr->vfe, CODEC_S_JPEG_TDS_BYTE,
1021 					 sizeof(int), &field_size);
1022 			zr->vfe->set_video(zr->vfe, zr->timing, &cap,
1023 					   &zr->card.vfe_pol);
1024 			zr->vfe->set_mode(zr->vfe, CODEC_DO_COMPRESSION);
1025 		}
1026 
1027 		init_jpeg_queue(zr);
1028 		zr36057_set_jpg(zr, mode);	// \P_Reset, ... Video param, FIFO
1029 
1030 		clear_interrupt_counters(zr);
1031 		dprintk(2, KERN_INFO "%s: enable_jpg(MOTION_COMPRESS)\n",
1032 			ZR_DEVNAME(zr));
1033 		break;
1034 	}
1035 
1036 	case BUZ_MODE_MOTION_DECOMPRESS:
1037 		/* In motion decompression mode, the decoder output must be disabled, and
1038 		 * the video bus direction set to output.
1039 		 */
1040 		decoder_call(zr, video, s_stream, 0);
1041 		set_videobus_dir(zr, 1);
1042 		encoder_call(zr, video, s_routing, 1, 0, 0);
1043 
1044 		/* Take the JPEG codec and the VFE out of sleep */
1045 		jpeg_codec_sleep(zr, 0);
1046 		/* Setup the VFE */
1047 		if (zr->vfe) {
1048 			zr->vfe->set_video(zr->vfe, zr->timing, &cap,
1049 					   &zr->card.vfe_pol);
1050 			zr->vfe->set_mode(zr->vfe, CODEC_DO_EXPANSION);
1051 		}
1052 		/* Setup the JPEG codec */
1053 		zr->codec->set_video(zr->codec, zr->timing, &cap,
1054 				     &zr->card.vfe_pol);
1055 		zr->codec->set_mode(zr->codec, CODEC_DO_EXPANSION);
1056 
1057 		init_jpeg_queue(zr);
1058 		zr36057_set_jpg(zr, mode);	// \P_Reset, ... Video param, FIFO
1059 
1060 		clear_interrupt_counters(zr);
1061 		dprintk(2, KERN_INFO "%s: enable_jpg(MOTION_DECOMPRESS)\n",
1062 			ZR_DEVNAME(zr));
1063 		break;
1064 
1065 	case BUZ_MODE_IDLE:
1066 	default:
1067 		/* shut down processing */
1068 		btand(~(zr->card.jpeg_int | ZR36057_ICR_JPEGRepIRQ),
1069 		      ZR36057_ICR);
1070 		btwrite(zr->card.jpeg_int | ZR36057_ICR_JPEGRepIRQ,
1071 			ZR36057_ISR);
1072 		btand(~ZR36057_JMC_Go_en, ZR36057_JMC);	// \Go_en
1073 
1074 		msleep(50);
1075 
1076 		set_videobus_dir(zr, 0);
1077 		set_frame(zr, 1);	// /FRAME
1078 		btor(ZR36057_MCTCR_CFlush, ZR36057_MCTCR);	// /CFlush
1079 		btwrite(0, ZR36057_JPC);	// \P_Reset,\CodTrnsEn,\Active
1080 		btand(~ZR36057_JMC_VFIFO_FB, ZR36057_JMC);
1081 		btand(~ZR36057_JMC_SyncMstr, ZR36057_JMC);
1082 		jpeg_codec_reset(zr);
1083 		jpeg_codec_sleep(zr, 1);
1084 		zr36057_adjust_vfe(zr, mode);
1085 
1086 		decoder_call(zr, video, s_stream, 1);
1087 		encoder_call(zr, video, s_routing, 0, 0, 0);
1088 
1089 		dprintk(2, KERN_INFO "%s: enable_jpg(IDLE)\n", ZR_DEVNAME(zr));
1090 		break;
1091 
1092 	}
1093 }
1094 
1095 /* when this is called the spinlock must be held */
1096 void
1097 zoran_feed_stat_com (struct zoran *zr)
1098 {
1099 	/* move frames from pending queue to DMA */
1100 
1101 	int frame, i, max_stat_com;
1102 
1103 	max_stat_com =
1104 	    (zr->jpg_settings.TmpDcm ==
1105 	     1) ? BUZ_NUM_STAT_COM : (BUZ_NUM_STAT_COM >> 1);
1106 
1107 	while ((zr->jpg_dma_head - zr->jpg_dma_tail) < max_stat_com &&
1108 	       zr->jpg_dma_head < zr->jpg_que_head) {
1109 
1110 		frame = zr->jpg_pend[zr->jpg_dma_head & BUZ_MASK_FRAME];
1111 		if (zr->jpg_settings.TmpDcm == 1) {
1112 			/* fill 1 stat_com entry */
1113 			i = (zr->jpg_dma_head -
1114 			     zr->jpg_err_shift) & BUZ_MASK_STAT_COM;
1115 			if (!(zr->stat_com[i] & cpu_to_le32(1)))
1116 				break;
1117 			zr->stat_com[i] =
1118 			    cpu_to_le32(zr->jpg_buffers.buffer[frame].jpg.frag_tab_bus);
1119 		} else {
1120 			/* fill 2 stat_com entries */
1121 			i = ((zr->jpg_dma_head -
1122 			      zr->jpg_err_shift) & 1) * 2;
1123 			if (!(zr->stat_com[i] & cpu_to_le32(1)))
1124 				break;
1125 			zr->stat_com[i] =
1126 			    cpu_to_le32(zr->jpg_buffers.buffer[frame].jpg.frag_tab_bus);
1127 			zr->stat_com[i + 1] =
1128 			    cpu_to_le32(zr->jpg_buffers.buffer[frame].jpg.frag_tab_bus);
1129 		}
1130 		zr->jpg_buffers.buffer[frame].state = BUZ_STATE_DMA;
1131 		zr->jpg_dma_head++;
1132 
1133 	}
1134 	if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS)
1135 		zr->jpg_queued_num++;
1136 }
1137 
1138 /* when this is called the spinlock must be held */
1139 static void
1140 zoran_reap_stat_com (struct zoran *zr)
1141 {
1142 	/* move frames from DMA queue to done queue */
1143 
1144 	int i;
1145 	u32 stat_com;
1146 	unsigned int seq;
1147 	unsigned int dif;
1148 	struct zoran_buffer *buffer;
1149 	int frame;
1150 
1151 	/* In motion decompress we don't have a hardware frame counter,
1152 	 * we just count the interrupts here */
1153 
1154 	if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) {
1155 		zr->jpg_seq_num++;
1156 	}
1157 	while (zr->jpg_dma_tail < zr->jpg_dma_head) {
1158 		if (zr->jpg_settings.TmpDcm == 1)
1159 			i = (zr->jpg_dma_tail -
1160 			     zr->jpg_err_shift) & BUZ_MASK_STAT_COM;
1161 		else
1162 			i = ((zr->jpg_dma_tail -
1163 			      zr->jpg_err_shift) & 1) * 2 + 1;
1164 
1165 		stat_com = le32_to_cpu(zr->stat_com[i]);
1166 
1167 		if ((stat_com & 1) == 0) {
1168 			return;
1169 		}
1170 		frame = zr->jpg_pend[zr->jpg_dma_tail & BUZ_MASK_FRAME];
1171 		buffer = &zr->jpg_buffers.buffer[frame];
1172 		do_gettimeofday(&buffer->bs.timestamp);
1173 
1174 		if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) {
1175 			buffer->bs.length = (stat_com & 0x7fffff) >> 1;
1176 
1177 			/* update sequence number with the help of the counter in stat_com */
1178 
1179 			seq = ((stat_com >> 24) + zr->jpg_err_seq) & 0xff;
1180 			dif = (seq - zr->jpg_seq_num) & 0xff;
1181 			zr->jpg_seq_num += dif;
1182 		} else {
1183 			buffer->bs.length = 0;
1184 		}
1185 		buffer->bs.seq =
1186 		    zr->jpg_settings.TmpDcm ==
1187 		    2 ? (zr->jpg_seq_num >> 1) : zr->jpg_seq_num;
1188 		buffer->state = BUZ_STATE_DONE;
1189 
1190 		zr->jpg_dma_tail++;
1191 	}
1192 }
1193 
1194 static void zoran_restart(struct zoran *zr)
1195 {
1196 	/* Now the stat_comm buffer is ready for restart */
1197 	unsigned int status = 0;
1198 	int mode;
1199 
1200 	if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) {
1201 		decoder_call(zr, video, g_input_status, &status);
1202 		mode = CODEC_DO_COMPRESSION;
1203 	} else {
1204 		status = V4L2_IN_ST_NO_SIGNAL;
1205 		mode = CODEC_DO_EXPANSION;
1206 	}
1207 	if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS ||
1208 	    !(status & V4L2_IN_ST_NO_SIGNAL)) {
1209 		/********** RESTART code *************/
1210 		jpeg_codec_reset(zr);
1211 		zr->codec->set_mode(zr->codec, mode);
1212 		zr36057_set_jpg(zr, zr->codec_mode);
1213 		jpeg_start(zr);
1214 
1215 		if (zr->num_errors <= 8)
1216 			dprintk(2, KERN_INFO "%s: Restart\n",
1217 				ZR_DEVNAME(zr));
1218 
1219 		zr->JPEG_missed = 0;
1220 		zr->JPEG_error = 2;
1221 		/********** End RESTART code ***********/
1222 	}
1223 }
1224 
1225 static void
1226 error_handler (struct zoran *zr,
1227 	       u32           astat,
1228 	       u32           stat)
1229 {
1230 	int i;
1231 
1232 	/* This is JPEG error handling part */
1233 	if (zr->codec_mode != BUZ_MODE_MOTION_COMPRESS &&
1234 	    zr->codec_mode != BUZ_MODE_MOTION_DECOMPRESS) {
1235 		return;
1236 	}
1237 
1238 	if ((stat & 1) == 0 &&
1239 	    zr->codec_mode == BUZ_MODE_MOTION_COMPRESS &&
1240 	    zr->jpg_dma_tail - zr->jpg_que_tail >= zr->jpg_buffers.num_buffers) {
1241 		/* No free buffers... */
1242 		zoran_reap_stat_com(zr);
1243 		zoran_feed_stat_com(zr);
1244 		wake_up_interruptible(&zr->jpg_capq);
1245 		zr->JPEG_missed = 0;
1246 		return;
1247 	}
1248 
1249 	if (zr->JPEG_error == 1) {
1250 		zoran_restart(zr);
1251 		return;
1252 	}
1253 
1254 	/*
1255 	 * First entry: error just happened during normal operation
1256 	 *
1257 	 * In BUZ_MODE_MOTION_COMPRESS:
1258 	 *
1259 	 * Possible glitch in TV signal. In this case we should
1260 	 * stop the codec and wait for good quality signal before
1261 	 * restarting it to avoid further problems
1262 	 *
1263 	 * In BUZ_MODE_MOTION_DECOMPRESS:
1264 	 *
1265 	 * Bad JPEG frame: we have to mark it as processed (codec crashed
1266 	 * and was not able to do it itself), and to remove it from queue.
1267 	 */
1268 	btand(~ZR36057_JMC_Go_en, ZR36057_JMC);
1269 	udelay(1);
1270 	stat = stat | (post_office_read(zr, 7, 0) & 3) << 8;
1271 	btwrite(0, ZR36057_JPC);
1272 	btor(ZR36057_MCTCR_CFlush, ZR36057_MCTCR);
1273 	jpeg_codec_reset(zr);
1274 	jpeg_codec_sleep(zr, 1);
1275 	zr->JPEG_error = 1;
1276 	zr->num_errors++;
1277 
1278 	/* Report error */
1279 	if (zr36067_debug > 1 && zr->num_errors <= 8) {
1280 		long frame;
1281 		int j;
1282 
1283 		frame = zr->jpg_pend[zr->jpg_dma_tail & BUZ_MASK_FRAME];
1284 		printk(KERN_ERR
1285 		       "%s: JPEG error stat=0x%08x(0x%08x) queue_state=%ld/%ld/%ld/%ld seq=%ld frame=%ld. Codec stopped. ",
1286 		       ZR_DEVNAME(zr), stat, zr->last_isr,
1287 		       zr->jpg_que_tail, zr->jpg_dma_tail,
1288 		       zr->jpg_dma_head, zr->jpg_que_head,
1289 		       zr->jpg_seq_num, frame);
1290 		printk(KERN_INFO "stat_com frames:");
1291 		for (j = 0; j < BUZ_NUM_STAT_COM; j++) {
1292 			for (i = 0; i < zr->jpg_buffers.num_buffers; i++) {
1293 				if (le32_to_cpu(zr->stat_com[j]) == zr->jpg_buffers.buffer[i].jpg.frag_tab_bus)
1294 					printk(KERN_CONT "% d->%d", j, i);
1295 			}
1296 		}
1297 		printk(KERN_CONT "\n");
1298 	}
1299 	/* Find an entry in stat_com and rotate contents */
1300 	if (zr->jpg_settings.TmpDcm == 1)
1301 		i = (zr->jpg_dma_tail - zr->jpg_err_shift) & BUZ_MASK_STAT_COM;
1302 	else
1303 		i = ((zr->jpg_dma_tail - zr->jpg_err_shift) & 1) * 2;
1304 	if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) {
1305 		/* Mimic zr36067 operation */
1306 		zr->stat_com[i] |= cpu_to_le32(1);
1307 		if (zr->jpg_settings.TmpDcm != 1)
1308 			zr->stat_com[i + 1] |= cpu_to_le32(1);
1309 		/* Refill */
1310 		zoran_reap_stat_com(zr);
1311 		zoran_feed_stat_com(zr);
1312 		wake_up_interruptible(&zr->jpg_capq);
1313 		/* Find an entry in stat_com again after refill */
1314 		if (zr->jpg_settings.TmpDcm == 1)
1315 			i = (zr->jpg_dma_tail - zr->jpg_err_shift) & BUZ_MASK_STAT_COM;
1316 		else
1317 			i = ((zr->jpg_dma_tail - zr->jpg_err_shift) & 1) * 2;
1318 	}
1319 	if (i) {
1320 		/* Rotate stat_comm entries to make current entry first */
1321 		int j;
1322 		__le32 bus_addr[BUZ_NUM_STAT_COM];
1323 
1324 		/* Here we are copying the stat_com array, which
1325 		 * is already in little endian format, so
1326 		 * no endian conversions here
1327 		 */
1328 		memcpy(bus_addr, zr->stat_com, sizeof(bus_addr));
1329 
1330 		for (j = 0; j < BUZ_NUM_STAT_COM; j++)
1331 			zr->stat_com[j] = bus_addr[(i + j) & BUZ_MASK_STAT_COM];
1332 
1333 		zr->jpg_err_shift += i;
1334 		zr->jpg_err_shift &= BUZ_MASK_STAT_COM;
1335 	}
1336 	if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS)
1337 		zr->jpg_err_seq = zr->jpg_seq_num;	/* + 1; */
1338 	zoran_restart(zr);
1339 }
1340 
1341 irqreturn_t
1342 zoran_irq (int             irq,
1343 	   void           *dev_id)
1344 {
1345 	u32 stat, astat;
1346 	int count;
1347 	struct zoran *zr;
1348 	unsigned long flags;
1349 
1350 	zr = dev_id;
1351 	count = 0;
1352 
1353 	if (zr->testing) {
1354 		/* Testing interrupts */
1355 		spin_lock_irqsave(&zr->spinlock, flags);
1356 		while ((stat = count_reset_interrupt(zr))) {
1357 			if (count++ > 100) {
1358 				btand(~ZR36057_ICR_IntPinEn, ZR36057_ICR);
1359 				dprintk(1,
1360 					KERN_ERR
1361 					"%s: IRQ lockup while testing, isr=0x%08x, cleared int mask\n",
1362 					ZR_DEVNAME(zr), stat);
1363 				wake_up_interruptible(&zr->test_q);
1364 			}
1365 		}
1366 		zr->last_isr = stat;
1367 		spin_unlock_irqrestore(&zr->spinlock, flags);
1368 		return IRQ_HANDLED;
1369 	}
1370 
1371 	spin_lock_irqsave(&zr->spinlock, flags);
1372 	while (1) {
1373 		/* get/clear interrupt status bits */
1374 		stat = count_reset_interrupt(zr);
1375 		astat = stat & IRQ_MASK;
1376 		if (!astat) {
1377 			break;
1378 		}
1379 		dprintk(4,
1380 			KERN_DEBUG
1381 			"zoran_irq: astat: 0x%08x, mask: 0x%08x\n",
1382 			astat, btread(ZR36057_ICR));
1383 		if (astat & zr->card.vsync_int) {	// SW
1384 
1385 			if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS ||
1386 			    zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) {
1387 				/* count missed interrupts */
1388 				zr->JPEG_missed++;
1389 			}
1390 			//post_office_read(zr,1,0);
1391 			/* Interrupts may still happen when
1392 			 * zr->v4l_memgrab_active is switched off.
1393 			 * We simply ignore them */
1394 
1395 			if (zr->v4l_memgrab_active) {
1396 				/* A lot more checks should be here ... */
1397 				if ((btread(ZR36057_VSSFGR) & ZR36057_VSSFGR_SnapShot) == 0)
1398 					dprintk(1,
1399 						KERN_WARNING
1400 						"%s: BuzIRQ with SnapShot off ???\n",
1401 						ZR_DEVNAME(zr));
1402 
1403 				if (zr->v4l_grab_frame != NO_GRAB_ACTIVE) {
1404 					/* There is a grab on a frame going on, check if it has finished */
1405 					if ((btread(ZR36057_VSSFGR) & ZR36057_VSSFGR_FrameGrab) == 0) {
1406 						/* it is finished, notify the user */
1407 
1408 						zr->v4l_buffers.buffer[zr->v4l_grab_frame].state = BUZ_STATE_DONE;
1409 						zr->v4l_buffers.buffer[zr->v4l_grab_frame].bs.seq = zr->v4l_grab_seq;
1410 						do_gettimeofday(&zr->v4l_buffers.buffer[zr->v4l_grab_frame].bs.timestamp);
1411 						zr->v4l_grab_frame = NO_GRAB_ACTIVE;
1412 						zr->v4l_pend_tail++;
1413 					}
1414 				}
1415 
1416 				if (zr->v4l_grab_frame == NO_GRAB_ACTIVE)
1417 					wake_up_interruptible(&zr->v4l_capq);
1418 
1419 				/* Check if there is another grab queued */
1420 
1421 				if (zr->v4l_grab_frame == NO_GRAB_ACTIVE &&
1422 				    zr->v4l_pend_tail != zr->v4l_pend_head) {
1423 					int frame = zr->v4l_pend[zr->v4l_pend_tail & V4L_MASK_FRAME];
1424 					u32 reg;
1425 
1426 					zr->v4l_grab_frame = frame;
1427 
1428 					/* Set zr36057 video front end and enable video */
1429 
1430 					/* Buffer address */
1431 
1432 					reg = zr->v4l_buffers.buffer[frame].v4l.fbuffer_bus;
1433 					btwrite(reg, ZR36057_VDTR);
1434 					if (zr->v4l_settings.height > BUZ_MAX_HEIGHT / 2)
1435 						reg += zr->v4l_settings.bytesperline;
1436 					btwrite(reg, ZR36057_VDBR);
1437 
1438 					/* video stride, status, and frame grab register */
1439 					reg = 0;
1440 					if (zr->v4l_settings.height > BUZ_MAX_HEIGHT / 2)
1441 						reg += zr->v4l_settings.bytesperline;
1442 					reg = (reg << ZR36057_VSSFGR_DispStride);
1443 					reg |= ZR36057_VSSFGR_VidOvf;
1444 					reg |= ZR36057_VSSFGR_SnapShot;
1445 					reg |= ZR36057_VSSFGR_FrameGrab;
1446 					btwrite(reg, ZR36057_VSSFGR);
1447 
1448 					btor(ZR36057_VDCR_VidEn,
1449 					     ZR36057_VDCR);
1450 				}
1451 			}
1452 
1453 			/* even if we don't grab, we do want to increment
1454 			 * the sequence counter to see lost frames */
1455 			zr->v4l_grab_seq++;
1456 		}
1457 #if (IRQ_MASK & ZR36057_ISR_CodRepIRQ)
1458 		if (astat & ZR36057_ISR_CodRepIRQ) {
1459 			zr->intr_counter_CodRepIRQ++;
1460 			IDEBUG(printk(KERN_DEBUG "%s: ZR36057_ISR_CodRepIRQ\n",
1461 				ZR_DEVNAME(zr)));
1462 			btand(~ZR36057_ICR_CodRepIRQ, ZR36057_ICR);
1463 		}
1464 #endif				/* (IRQ_MASK & ZR36057_ISR_CodRepIRQ) */
1465 
1466 #if (IRQ_MASK & ZR36057_ISR_JPEGRepIRQ)
1467 		if ((astat & ZR36057_ISR_JPEGRepIRQ) &&
1468 		    (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS ||
1469 		     zr->codec_mode == BUZ_MODE_MOTION_COMPRESS)) {
1470 			if (zr36067_debug > 1 && (!zr->frame_num || zr->JPEG_error)) {
1471 				char sv[BUZ_NUM_STAT_COM + 1];
1472 				int i;
1473 
1474 				printk(KERN_INFO
1475 				       "%s: first frame ready: state=0x%08x odd_even=%d field_per_buff=%d delay=%d\n",
1476 				       ZR_DEVNAME(zr), stat,
1477 				       zr->jpg_settings.odd_even,
1478 				       zr->jpg_settings.field_per_buff,
1479 				       zr->JPEG_missed);
1480 
1481 				for (i = 0; i < BUZ_NUM_STAT_COM; i++)
1482 					sv[i] = le32_to_cpu(zr->stat_com[i]) & 1 ? '1' : '0';
1483 				sv[BUZ_NUM_STAT_COM] = 0;
1484 				printk(KERN_INFO
1485 				       "%s: stat_com=%s queue_state=%ld/%ld/%ld/%ld\n",
1486 				       ZR_DEVNAME(zr), sv,
1487 				       zr->jpg_que_tail,
1488 				       zr->jpg_dma_tail,
1489 				       zr->jpg_dma_head,
1490 				       zr->jpg_que_head);
1491 			} else {
1492 				/* Get statistics */
1493 				if (zr->JPEG_missed > zr->JPEG_max_missed)
1494 					zr->JPEG_max_missed = zr->JPEG_missed;
1495 				if (zr->JPEG_missed < zr->JPEG_min_missed)
1496 					zr->JPEG_min_missed = zr->JPEG_missed;
1497 			}
1498 
1499 			if (zr36067_debug > 2 && zr->frame_num < 6) {
1500 				int i;
1501 
1502 				printk(KERN_INFO "%s: seq=%ld stat_com:",
1503 				       ZR_DEVNAME(zr), zr->jpg_seq_num);
1504 				for (i = 0; i < 4; i++) {
1505 					printk(KERN_CONT " %08x",
1506 					       le32_to_cpu(zr->stat_com[i]));
1507 				}
1508 				printk(KERN_CONT "\n");
1509 			}
1510 			zr->frame_num++;
1511 			zr->JPEG_missed = 0;
1512 			zr->JPEG_error = 0;
1513 			zoran_reap_stat_com(zr);
1514 			zoran_feed_stat_com(zr);
1515 			wake_up_interruptible(&zr->jpg_capq);
1516 		}
1517 #endif				/* (IRQ_MASK & ZR36057_ISR_JPEGRepIRQ) */
1518 
1519 		/* DATERR, too many fields missed, error processing */
1520 		if ((astat & zr->card.jpeg_int) ||
1521 		    zr->JPEG_missed > 25 ||
1522 		    zr->JPEG_error == 1	||
1523 		    ((zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) &&
1524 		     (zr->frame_num && (zr->JPEG_missed > zr->jpg_settings.field_per_buff)))) {
1525 			error_handler(zr, astat, stat);
1526 		}
1527 
1528 		count++;
1529 		if (count > 10) {
1530 			dprintk(2, KERN_WARNING "%s: irq loop %d\n",
1531 				ZR_DEVNAME(zr), count);
1532 			if (count > 20) {
1533 				btand(~ZR36057_ICR_IntPinEn, ZR36057_ICR);
1534 				dprintk(2,
1535 					KERN_ERR
1536 					"%s: IRQ lockup, cleared int mask\n",
1537 					ZR_DEVNAME(zr));
1538 				break;
1539 			}
1540 		}
1541 		zr->last_isr = stat;
1542 	}
1543 	spin_unlock_irqrestore(&zr->spinlock, flags);
1544 
1545 	return IRQ_HANDLED;
1546 }
1547 
1548 void
1549 zoran_set_pci_master (struct zoran *zr,
1550 		      int           set_master)
1551 {
1552 	if (set_master) {
1553 		pci_set_master(zr->pci_dev);
1554 	} else {
1555 		u16 command;
1556 
1557 		pci_read_config_word(zr->pci_dev, PCI_COMMAND, &command);
1558 		command &= ~PCI_COMMAND_MASTER;
1559 		pci_write_config_word(zr->pci_dev, PCI_COMMAND, command);
1560 	}
1561 }
1562 
1563 void
1564 zoran_init_hardware (struct zoran *zr)
1565 {
1566 	/* Enable bus-mastering */
1567 	zoran_set_pci_master(zr, 1);
1568 
1569 	/* Initialize the board */
1570 	if (zr->card.init) {
1571 		zr->card.init(zr);
1572 	}
1573 
1574 	decoder_call(zr, core, init, 0);
1575 	decoder_call(zr, core, s_std, zr->norm);
1576 	decoder_call(zr, video, s_routing,
1577 		zr->card.input[zr->input].muxsel, 0, 0);
1578 
1579 	encoder_call(zr, core, init, 0);
1580 	encoder_call(zr, video, s_std_output, zr->norm);
1581 	encoder_call(zr, video, s_routing, 0, 0, 0);
1582 
1583 	/* toggle JPEG codec sleep to sync PLL */
1584 	jpeg_codec_sleep(zr, 1);
1585 	jpeg_codec_sleep(zr, 0);
1586 
1587 	/* set individual interrupt enables (without GIRQ1)
1588 	 * but don't global enable until zoran_open() */
1589 
1590 	//btwrite(IRQ_MASK & ~ZR36057_ISR_GIRQ1, ZR36057_ICR);  // SW
1591 	// It looks like using only JPEGRepIRQEn is not always reliable,
1592 	// may be when JPEG codec crashes it won't generate IRQ? So,
1593 	 /*CP*/			//        btwrite(IRQ_MASK, ZR36057_ICR); // Enable Vsync interrupts too. SM    WHY ? LP
1594 	    zr36057_init_vfe(zr);
1595 
1596 	zr36057_enable_jpg(zr, BUZ_MODE_IDLE);
1597 
1598 	btwrite(IRQ_MASK, ZR36057_ISR);	// Clears interrupts
1599 }
1600 
1601 void
1602 zr36057_restart (struct zoran *zr)
1603 {
1604 	btwrite(0, ZR36057_SPGPPCR);
1605 	mdelay(1);
1606 	btor(ZR36057_SPGPPCR_SoftReset, ZR36057_SPGPPCR);
1607 	mdelay(1);
1608 
1609 	/* assert P_Reset */
1610 	btwrite(0, ZR36057_JPC);
1611 	/* set up GPIO direction - all output */
1612 	btwrite(ZR36057_SPGPPCR_SoftReset | 0, ZR36057_SPGPPCR);
1613 
1614 	/* set up GPIO pins and guest bus timing */
1615 	btwrite((0x81 << 24) | 0x8888, ZR36057_GPPGCR1);
1616 }
1617 
1618 /*
1619  * initialize video front end
1620  */
1621 
1622 static void
1623 zr36057_init_vfe (struct zoran *zr)
1624 {
1625 	u32 reg;
1626 
1627 	reg = btread(ZR36057_VFESPFR);
1628 	reg |= ZR36057_VFESPFR_LittleEndian;
1629 	reg &= ~ZR36057_VFESPFR_VCLKPol;
1630 	reg |= ZR36057_VFESPFR_ExtFl;
1631 	reg |= ZR36057_VFESPFR_TopField;
1632 	btwrite(reg, ZR36057_VFESPFR);
1633 	reg = btread(ZR36057_VDCR);
1634 	if (pci_pci_problems & PCIPCI_TRITON)
1635 		// || zr->revision < 1) // Revision 1 has also Triton support
1636 		reg &= ~ZR36057_VDCR_Triton;
1637 	else
1638 		reg |= ZR36057_VDCR_Triton;
1639 	btwrite(reg, ZR36057_VDCR);
1640 }
1641