1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Copyright (C) 2010-2013 Bluecherry, LLC <https://www.bluecherrydvr.com> 4 * 5 * Original author: 6 * Ben Collins <bcollins@ubuntu.com> 7 * 8 * Additional work by: 9 * John Brooks <john.brooks@bluecherry.net> 10 */ 11 12 #include <linux/kernel.h> 13 #include <linux/module.h> 14 #include <linux/slab.h> 15 16 #include "solo6x10.h" 17 18 static int multi_p2m; 19 module_param(multi_p2m, uint, 0644); 20 MODULE_PARM_DESC(multi_p2m, 21 "Use multiple P2M DMA channels (default: no, 6010-only)"); 22 23 static int desc_mode; 24 module_param(desc_mode, uint, 0644); 25 MODULE_PARM_DESC(desc_mode, 26 "Allow use of descriptor mode DMA (default: no, 6010-only)"); 27 28 int solo_p2m_dma(struct solo_dev *solo_dev, int wr, 29 void *sys_addr, u32 ext_addr, u32 size, 30 int repeat, u32 ext_size) 31 { 32 dma_addr_t dma_addr; 33 int ret; 34 35 if (WARN_ON_ONCE((unsigned long)sys_addr & 0x03)) 36 return -EINVAL; 37 if (WARN_ON_ONCE(!size)) 38 return -EINVAL; 39 40 dma_addr = dma_map_single(&solo_dev->pdev->dev, sys_addr, size, 41 wr ? DMA_TO_DEVICE : DMA_FROM_DEVICE); 42 if (dma_mapping_error(&solo_dev->pdev->dev, dma_addr)) 43 return -ENOMEM; 44 45 ret = solo_p2m_dma_t(solo_dev, wr, dma_addr, ext_addr, size, 46 repeat, ext_size); 47 48 dma_unmap_single(&solo_dev->pdev->dev, dma_addr, size, 49 wr ? DMA_TO_DEVICE : DMA_FROM_DEVICE); 50 51 return ret; 52 } 53 54 /* Mutex must be held for p2m_id before calling this!! */ 55 int solo_p2m_dma_desc(struct solo_dev *solo_dev, 56 struct solo_p2m_desc *desc, dma_addr_t desc_dma, 57 int desc_cnt) 58 { 59 struct solo_p2m_dev *p2m_dev; 60 unsigned long time_left; 61 unsigned int config = 0; 62 int ret = 0; 63 unsigned int p2m_id = 0; 64 65 /* Get next ID. According to Softlogic, 6110 has problems on !=0 P2M */ 66 if (solo_dev->type != SOLO_DEV_6110 && multi_p2m) 67 p2m_id = atomic_inc_return(&solo_dev->p2m_count) % SOLO_NR_P2M; 68 69 p2m_dev = &solo_dev->p2m_dev[p2m_id]; 70 71 if (mutex_lock_interruptible(&p2m_dev->mutex)) 72 return -EINTR; 73 74 reinit_completion(&p2m_dev->completion); 75 p2m_dev->error = 0; 76 77 if (desc_cnt > 1 && solo_dev->type != SOLO_DEV_6110 && desc_mode) { 78 /* For 6010 with more than one desc, we can do a one-shot */ 79 p2m_dev->desc_count = p2m_dev->desc_idx = 0; 80 config = solo_reg_read(solo_dev, SOLO_P2M_CONFIG(p2m_id)); 81 82 solo_reg_write(solo_dev, SOLO_P2M_DES_ADR(p2m_id), desc_dma); 83 solo_reg_write(solo_dev, SOLO_P2M_DESC_ID(p2m_id), desc_cnt); 84 solo_reg_write(solo_dev, SOLO_P2M_CONFIG(p2m_id), config | 85 SOLO_P2M_DESC_MODE); 86 } else { 87 /* For single descriptors and 6110, we need to run each desc */ 88 p2m_dev->desc_count = desc_cnt; 89 p2m_dev->desc_idx = 1; 90 p2m_dev->descs = desc; 91 92 solo_reg_write(solo_dev, SOLO_P2M_TAR_ADR(p2m_id), 93 desc[1].dma_addr); 94 solo_reg_write(solo_dev, SOLO_P2M_EXT_ADR(p2m_id), 95 desc[1].ext_addr); 96 solo_reg_write(solo_dev, SOLO_P2M_EXT_CFG(p2m_id), 97 desc[1].cfg); 98 solo_reg_write(solo_dev, SOLO_P2M_CONTROL(p2m_id), 99 desc[1].ctrl); 100 } 101 102 time_left = wait_for_completion_timeout(&p2m_dev->completion, 103 solo_dev->p2m_jiffies); 104 105 if (WARN_ON_ONCE(p2m_dev->error)) 106 ret = -EIO; 107 else if (time_left == 0) { 108 solo_dev->p2m_timeouts++; 109 ret = -EAGAIN; 110 } 111 112 solo_reg_write(solo_dev, SOLO_P2M_CONTROL(p2m_id), 0); 113 114 /* Don't write here for the no_desc_mode case, because config is 0. 115 * We can't test no_desc_mode again, it might race. */ 116 if (desc_cnt > 1 && solo_dev->type != SOLO_DEV_6110 && config) 117 solo_reg_write(solo_dev, SOLO_P2M_CONFIG(p2m_id), config); 118 119 mutex_unlock(&p2m_dev->mutex); 120 121 return ret; 122 } 123 124 void solo_p2m_fill_desc(struct solo_p2m_desc *desc, int wr, 125 dma_addr_t dma_addr, u32 ext_addr, u32 size, 126 int repeat, u32 ext_size) 127 { 128 WARN_ON_ONCE(dma_addr & 0x03); 129 WARN_ON_ONCE(!size); 130 131 desc->cfg = SOLO_P2M_COPY_SIZE(size >> 2); 132 desc->ctrl = SOLO_P2M_BURST_SIZE(SOLO_P2M_BURST_256) | 133 (wr ? SOLO_P2M_WRITE : 0) | SOLO_P2M_TRANS_ON; 134 135 if (repeat) { 136 desc->cfg |= SOLO_P2M_EXT_INC(ext_size >> 2); 137 desc->ctrl |= SOLO_P2M_PCI_INC(size >> 2) | 138 SOLO_P2M_REPEAT(repeat); 139 } 140 141 desc->dma_addr = dma_addr; 142 desc->ext_addr = ext_addr; 143 } 144 145 int solo_p2m_dma_t(struct solo_dev *solo_dev, int wr, 146 dma_addr_t dma_addr, u32 ext_addr, u32 size, 147 int repeat, u32 ext_size) 148 { 149 struct solo_p2m_desc desc[2]; 150 151 solo_p2m_fill_desc(&desc[1], wr, dma_addr, ext_addr, size, repeat, 152 ext_size); 153 154 /* No need for desc_dma since we know it is a single-shot */ 155 return solo_p2m_dma_desc(solo_dev, desc, 0, 1); 156 } 157 158 void solo_p2m_isr(struct solo_dev *solo_dev, int id) 159 { 160 struct solo_p2m_dev *p2m_dev = &solo_dev->p2m_dev[id]; 161 struct solo_p2m_desc *desc; 162 163 if (p2m_dev->desc_count <= p2m_dev->desc_idx) { 164 complete(&p2m_dev->completion); 165 return; 166 } 167 168 /* Setup next descriptor */ 169 p2m_dev->desc_idx++; 170 desc = &p2m_dev->descs[p2m_dev->desc_idx]; 171 172 solo_reg_write(solo_dev, SOLO_P2M_CONTROL(id), 0); 173 solo_reg_write(solo_dev, SOLO_P2M_TAR_ADR(id), desc->dma_addr); 174 solo_reg_write(solo_dev, SOLO_P2M_EXT_ADR(id), desc->ext_addr); 175 solo_reg_write(solo_dev, SOLO_P2M_EXT_CFG(id), desc->cfg); 176 solo_reg_write(solo_dev, SOLO_P2M_CONTROL(id), desc->ctrl); 177 } 178 179 void solo_p2m_error_isr(struct solo_dev *solo_dev) 180 { 181 unsigned int err = solo_reg_read(solo_dev, SOLO_PCI_ERR); 182 struct solo_p2m_dev *p2m_dev; 183 int i; 184 185 if (!(err & (SOLO_PCI_ERR_P2M | SOLO_PCI_ERR_P2M_DESC))) 186 return; 187 188 for (i = 0; i < SOLO_NR_P2M; i++) { 189 p2m_dev = &solo_dev->p2m_dev[i]; 190 p2m_dev->error = 1; 191 solo_reg_write(solo_dev, SOLO_P2M_CONTROL(i), 0); 192 complete(&p2m_dev->completion); 193 } 194 } 195 196 void solo_p2m_exit(struct solo_dev *solo_dev) 197 { 198 int i; 199 200 for (i = 0; i < SOLO_NR_P2M; i++) 201 solo_irq_off(solo_dev, SOLO_IRQ_P2M(i)); 202 } 203 204 static int solo_p2m_test(struct solo_dev *solo_dev, int base, int size) 205 { 206 u32 *wr_buf; 207 u32 *rd_buf; 208 int i; 209 int ret = -EIO; 210 int order = get_order(size); 211 212 wr_buf = (u32 *)__get_free_pages(GFP_KERNEL, order); 213 if (wr_buf == NULL) 214 return -1; 215 216 rd_buf = (u32 *)__get_free_pages(GFP_KERNEL, order); 217 if (rd_buf == NULL) { 218 free_pages((unsigned long)wr_buf, order); 219 return -1; 220 } 221 222 for (i = 0; i < (size >> 3); i++) 223 *(wr_buf + i) = (i << 16) | (i + 1); 224 225 for (i = (size >> 3); i < (size >> 2); i++) 226 *(wr_buf + i) = ~((i << 16) | (i + 1)); 227 228 memset(rd_buf, 0x55, size); 229 230 if (solo_p2m_dma(solo_dev, 1, wr_buf, base, size, 0, 0)) 231 goto test_fail; 232 233 if (solo_p2m_dma(solo_dev, 0, rd_buf, base, size, 0, 0)) 234 goto test_fail; 235 236 for (i = 0; i < (size >> 2); i++) { 237 if (*(wr_buf + i) != *(rd_buf + i)) 238 goto test_fail; 239 } 240 241 ret = 0; 242 243 test_fail: 244 free_pages((unsigned long)wr_buf, order); 245 free_pages((unsigned long)rd_buf, order); 246 247 return ret; 248 } 249 250 int solo_p2m_init(struct solo_dev *solo_dev) 251 { 252 struct solo_p2m_dev *p2m_dev; 253 int i; 254 255 for (i = 0; i < SOLO_NR_P2M; i++) { 256 p2m_dev = &solo_dev->p2m_dev[i]; 257 258 mutex_init(&p2m_dev->mutex); 259 init_completion(&p2m_dev->completion); 260 261 solo_reg_write(solo_dev, SOLO_P2M_CONTROL(i), 0); 262 solo_reg_write(solo_dev, SOLO_P2M_CONFIG(i), 263 SOLO_P2M_CSC_16BIT_565 | 264 SOLO_P2M_DESC_INTR_OPT | 265 SOLO_P2M_DMA_INTERVAL(0) | 266 SOLO_P2M_PCI_MASTER_MODE); 267 solo_irq_on(solo_dev, SOLO_IRQ_P2M(i)); 268 } 269 270 /* Find correct SDRAM size */ 271 for (solo_dev->sdram_size = 0, i = 2; i >= 0; i--) { 272 solo_reg_write(solo_dev, SOLO_DMA_CTRL, 273 SOLO_DMA_CTRL_REFRESH_CYCLE(1) | 274 SOLO_DMA_CTRL_SDRAM_SIZE(i) | 275 SOLO_DMA_CTRL_SDRAM_CLK_INVERT | 276 SOLO_DMA_CTRL_READ_CLK_SELECT | 277 SOLO_DMA_CTRL_LATENCY(1)); 278 279 solo_reg_write(solo_dev, SOLO_SYS_CFG, solo_dev->sys_config | 280 SOLO_SYS_CFG_RESET); 281 solo_reg_write(solo_dev, SOLO_SYS_CFG, solo_dev->sys_config); 282 283 switch (i) { 284 case 2: 285 if (solo_p2m_test(solo_dev, 0x07ff0000, 0x00010000) || 286 solo_p2m_test(solo_dev, 0x05ff0000, 0x00010000)) 287 continue; 288 break; 289 290 case 1: 291 if (solo_p2m_test(solo_dev, 0x03ff0000, 0x00010000)) 292 continue; 293 break; 294 295 default: 296 if (solo_p2m_test(solo_dev, 0x01ff0000, 0x00010000)) 297 continue; 298 } 299 300 solo_dev->sdram_size = (32 << 20) << i; 301 break; 302 } 303 304 if (!solo_dev->sdram_size) { 305 dev_err(&solo_dev->pdev->dev, "Error detecting SDRAM size\n"); 306 return -EIO; 307 } 308 309 if (SOLO_SDRAM_END(solo_dev) > solo_dev->sdram_size) { 310 dev_err(&solo_dev->pdev->dev, 311 "SDRAM is not large enough (%u < %u)\n", 312 solo_dev->sdram_size, SOLO_SDRAM_END(solo_dev)); 313 return -EIO; 314 } 315 316 return 0; 317 } 318