1 /* 2 3 bttv-i2c.c -- all the i2c code is here 4 5 bttv - Bt848 frame grabber driver 6 7 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) 8 & Marcus Metzler (mocm@thp.uni-koeln.de) 9 (c) 1999-2003 Gerd Knorr <kraxel@bytesex.org> 10 11 (c) 2005 Mauro Carvalho Chehab <mchehab@infradead.org> 12 - Multituner support and i2c address binding 13 14 This program is free software; you can redistribute it and/or modify 15 it under the terms of the GNU General Public License as published by 16 the Free Software Foundation; either version 2 of the License, or 17 (at your option) any later version. 18 19 This program is distributed in the hope that it will be useful, 20 but WITHOUT ANY WARRANTY; without even the implied warranty of 21 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 22 GNU General Public License for more details. 23 24 You should have received a copy of the GNU General Public License 25 along with this program; if not, write to the Free Software 26 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 27 28 */ 29 30 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 31 32 #include <linux/module.h> 33 #include <linux/init.h> 34 #include <linux/delay.h> 35 36 #include "bttvp.h" 37 #include <media/v4l2-common.h> 38 #include <linux/jiffies.h> 39 #include <asm/io.h> 40 41 static int i2c_debug; 42 static int i2c_hw; 43 static int i2c_scan; 44 module_param(i2c_debug, int, 0644); 45 MODULE_PARM_DESC(i2c_debug, "configure i2c debug level"); 46 module_param(i2c_hw, int, 0444); 47 MODULE_PARM_DESC(i2c_hw, "force use of hardware i2c support, instead of software bitbang"); 48 module_param(i2c_scan, int, 0444); 49 MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time"); 50 51 static unsigned int i2c_udelay = 5; 52 module_param(i2c_udelay, int, 0444); 53 MODULE_PARM_DESC(i2c_udelay, "soft i2c delay at insmod time, in usecs (should be 5 or higher). Lower value means higher bus speed."); 54 55 /* ----------------------------------------------------------------------- */ 56 /* I2C functions - bitbanging adapter (software i2c) */ 57 58 static void bttv_bit_setscl(void *data, int state) 59 { 60 struct bttv *btv = (struct bttv*)data; 61 62 if (state) 63 btv->i2c_state |= 0x02; 64 else 65 btv->i2c_state &= ~0x02; 66 btwrite(btv->i2c_state, BT848_I2C); 67 btread(BT848_I2C); 68 } 69 70 static void bttv_bit_setsda(void *data, int state) 71 { 72 struct bttv *btv = (struct bttv*)data; 73 74 if (state) 75 btv->i2c_state |= 0x01; 76 else 77 btv->i2c_state &= ~0x01; 78 btwrite(btv->i2c_state, BT848_I2C); 79 btread(BT848_I2C); 80 } 81 82 static int bttv_bit_getscl(void *data) 83 { 84 struct bttv *btv = (struct bttv*)data; 85 int state; 86 87 state = btread(BT848_I2C) & 0x02 ? 1 : 0; 88 return state; 89 } 90 91 static int bttv_bit_getsda(void *data) 92 { 93 struct bttv *btv = (struct bttv*)data; 94 int state; 95 96 state = btread(BT848_I2C) & 0x01; 97 return state; 98 } 99 100 static struct i2c_algo_bit_data bttv_i2c_algo_bit_template = { 101 .setsda = bttv_bit_setsda, 102 .setscl = bttv_bit_setscl, 103 .getsda = bttv_bit_getsda, 104 .getscl = bttv_bit_getscl, 105 .udelay = 16, 106 .timeout = 200, 107 }; 108 109 /* ----------------------------------------------------------------------- */ 110 /* I2C functions - hardware i2c */ 111 112 static u32 functionality(struct i2c_adapter *adap) 113 { 114 return I2C_FUNC_SMBUS_EMUL; 115 } 116 117 static int 118 bttv_i2c_wait_done(struct bttv *btv) 119 { 120 int rc = 0; 121 122 /* timeout */ 123 if (wait_event_interruptible_timeout(btv->i2c_queue, 124 btv->i2c_done, msecs_to_jiffies(85)) == -ERESTARTSYS) 125 rc = -EIO; 126 127 if (btv->i2c_done & BT848_INT_RACK) 128 rc = 1; 129 btv->i2c_done = 0; 130 return rc; 131 } 132 133 #define I2C_HW (BT878_I2C_MODE | BT848_I2C_SYNC |\ 134 BT848_I2C_SCL | BT848_I2C_SDA) 135 136 static int 137 bttv_i2c_sendbytes(struct bttv *btv, const struct i2c_msg *msg, int last) 138 { 139 u32 xmit; 140 int retval,cnt; 141 142 /* sanity checks */ 143 if (0 == msg->len) 144 return -EINVAL; 145 146 /* start, address + first byte */ 147 xmit = (msg->addr << 25) | (msg->buf[0] << 16) | I2C_HW; 148 if (msg->len > 1 || !last) 149 xmit |= BT878_I2C_NOSTOP; 150 btwrite(xmit, BT848_I2C); 151 retval = bttv_i2c_wait_done(btv); 152 if (retval < 0) 153 goto err; 154 if (retval == 0) 155 goto eio; 156 if (i2c_debug) { 157 pr_cont(" <W %02x %02x", msg->addr << 1, msg->buf[0]); 158 } 159 160 for (cnt = 1; cnt < msg->len; cnt++ ) { 161 /* following bytes */ 162 xmit = (msg->buf[cnt] << 24) | I2C_HW | BT878_I2C_NOSTART; 163 if (cnt < msg->len-1 || !last) 164 xmit |= BT878_I2C_NOSTOP; 165 btwrite(xmit, BT848_I2C); 166 retval = bttv_i2c_wait_done(btv); 167 if (retval < 0) 168 goto err; 169 if (retval == 0) 170 goto eio; 171 if (i2c_debug) 172 pr_cont(" %02x", msg->buf[cnt]); 173 } 174 if (i2c_debug && !(xmit & BT878_I2C_NOSTOP)) 175 pr_cont(">\n"); 176 return msg->len; 177 178 eio: 179 retval = -EIO; 180 err: 181 if (i2c_debug) 182 pr_cont(" ERR: %d\n",retval); 183 return retval; 184 } 185 186 static int 187 bttv_i2c_readbytes(struct bttv *btv, const struct i2c_msg *msg, int last) 188 { 189 u32 xmit; 190 u32 cnt; 191 int retval; 192 193 for (cnt = 0; cnt < msg->len; cnt++) { 194 xmit = (msg->addr << 25) | (1 << 24) | I2C_HW; 195 if (cnt < msg->len-1) 196 xmit |= BT848_I2C_W3B; 197 if (cnt < msg->len-1 || !last) 198 xmit |= BT878_I2C_NOSTOP; 199 if (cnt) 200 xmit |= BT878_I2C_NOSTART; 201 202 if (i2c_debug) { 203 if (!(xmit & BT878_I2C_NOSTART)) 204 pr_cont(" <R %02x", (msg->addr << 1) +1); 205 } 206 207 btwrite(xmit, BT848_I2C); 208 retval = bttv_i2c_wait_done(btv); 209 if (retval < 0) 210 goto err; 211 if (retval == 0) 212 goto eio; 213 msg->buf[cnt] = ((u32)btread(BT848_I2C) >> 8) & 0xff; 214 if (i2c_debug) { 215 pr_cont(" =%02x", msg->buf[cnt]); 216 } 217 if (i2c_debug && !(xmit & BT878_I2C_NOSTOP)) 218 pr_cont(" >\n"); 219 } 220 221 222 return msg->len; 223 224 eio: 225 retval = -EIO; 226 err: 227 if (i2c_debug) 228 pr_cont(" ERR: %d\n",retval); 229 return retval; 230 } 231 232 static int bttv_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num) 233 { 234 struct v4l2_device *v4l2_dev = i2c_get_adapdata(i2c_adap); 235 struct bttv *btv = to_bttv(v4l2_dev); 236 int retval = 0; 237 int i; 238 239 if (i2c_debug) 240 pr_debug("bt-i2c:"); 241 242 btwrite(BT848_INT_I2CDONE|BT848_INT_RACK, BT848_INT_STAT); 243 for (i = 0 ; i < num; i++) { 244 if (msgs[i].flags & I2C_M_RD) { 245 /* read */ 246 retval = bttv_i2c_readbytes(btv, &msgs[i], i+1 == num); 247 if (retval < 0) 248 goto err; 249 } else { 250 /* write */ 251 retval = bttv_i2c_sendbytes(btv, &msgs[i], i+1 == num); 252 if (retval < 0) 253 goto err; 254 } 255 } 256 return num; 257 258 err: 259 return retval; 260 } 261 262 static const struct i2c_algorithm bttv_algo = { 263 .master_xfer = bttv_i2c_xfer, 264 .functionality = functionality, 265 }; 266 267 /* ----------------------------------------------------------------------- */ 268 /* I2C functions - common stuff */ 269 270 /* read I2C */ 271 int bttv_I2CRead(struct bttv *btv, unsigned char addr, char *probe_for) 272 { 273 unsigned char buffer = 0; 274 275 if (0 != btv->i2c_rc) 276 return -1; 277 if (bttv_verbose && NULL != probe_for) 278 pr_info("%d: i2c: checking for %s @ 0x%02x... ", 279 btv->c.nr, probe_for, addr); 280 btv->i2c_client.addr = addr >> 1; 281 if (1 != i2c_master_recv(&btv->i2c_client, &buffer, 1)) { 282 if (NULL != probe_for) { 283 if (bttv_verbose) 284 pr_cont("not found\n"); 285 } else 286 pr_warn("%d: i2c read 0x%x: error\n", 287 btv->c.nr, addr); 288 return -1; 289 } 290 if (bttv_verbose && NULL != probe_for) 291 pr_cont("found\n"); 292 return buffer; 293 } 294 295 /* write I2C */ 296 int bttv_I2CWrite(struct bttv *btv, unsigned char addr, unsigned char b1, 297 unsigned char b2, int both) 298 { 299 unsigned char buffer[2]; 300 int bytes = both ? 2 : 1; 301 302 if (0 != btv->i2c_rc) 303 return -1; 304 btv->i2c_client.addr = addr >> 1; 305 buffer[0] = b1; 306 buffer[1] = b2; 307 if (bytes != i2c_master_send(&btv->i2c_client, buffer, bytes)) 308 return -1; 309 return 0; 310 } 311 312 /* read EEPROM content */ 313 void bttv_readee(struct bttv *btv, unsigned char *eedata, int addr) 314 { 315 memset(eedata, 0, 256); 316 if (0 != btv->i2c_rc) 317 return; 318 btv->i2c_client.addr = addr >> 1; 319 tveeprom_read(&btv->i2c_client, eedata, 256); 320 } 321 322 static char *i2c_devs[128] = { 323 [ 0x1c >> 1 ] = "lgdt330x", 324 [ 0x30 >> 1 ] = "IR (hauppauge)", 325 [ 0x80 >> 1 ] = "msp34xx", 326 [ 0x86 >> 1 ] = "tda9887", 327 [ 0xa0 >> 1 ] = "eeprom", 328 [ 0xc0 >> 1 ] = "tuner (analog)", 329 [ 0xc2 >> 1 ] = "tuner (analog)", 330 }; 331 332 static void do_i2c_scan(char *name, struct i2c_client *c) 333 { 334 unsigned char buf; 335 int i,rc; 336 337 for (i = 0; i < ARRAY_SIZE(i2c_devs); i++) { 338 c->addr = i; 339 rc = i2c_master_recv(c,&buf,0); 340 if (rc < 0) 341 continue; 342 pr_info("%s: i2c scan: found device @ 0x%x [%s]\n", 343 name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???"); 344 } 345 } 346 347 /* init + register i2c adapter */ 348 int init_bttv_i2c(struct bttv *btv) 349 { 350 strlcpy(btv->i2c_client.name, "bttv internal", I2C_NAME_SIZE); 351 352 if (i2c_hw) 353 btv->use_i2c_hw = 1; 354 if (btv->use_i2c_hw) { 355 /* bt878 */ 356 strlcpy(btv->c.i2c_adap.name, "bt878", 357 sizeof(btv->c.i2c_adap.name)); 358 btv->c.i2c_adap.algo = &bttv_algo; 359 } else { 360 /* bt848 */ 361 /* Prevents usage of invalid delay values */ 362 if (i2c_udelay<5) 363 i2c_udelay=5; 364 365 strlcpy(btv->c.i2c_adap.name, "bttv", 366 sizeof(btv->c.i2c_adap.name)); 367 btv->i2c_algo = bttv_i2c_algo_bit_template; 368 btv->i2c_algo.udelay = i2c_udelay; 369 btv->i2c_algo.data = btv; 370 btv->c.i2c_adap.algo_data = &btv->i2c_algo; 371 } 372 btv->c.i2c_adap.owner = THIS_MODULE; 373 374 btv->c.i2c_adap.dev.parent = &btv->c.pci->dev; 375 snprintf(btv->c.i2c_adap.name, sizeof(btv->c.i2c_adap.name), 376 "bt%d #%d [%s]", btv->id, btv->c.nr, 377 btv->use_i2c_hw ? "hw" : "sw"); 378 379 i2c_set_adapdata(&btv->c.i2c_adap, &btv->c.v4l2_dev); 380 btv->i2c_client.adapter = &btv->c.i2c_adap; 381 382 383 if (btv->use_i2c_hw) { 384 btv->i2c_rc = i2c_add_adapter(&btv->c.i2c_adap); 385 } else { 386 bttv_bit_setscl(btv,1); 387 bttv_bit_setsda(btv,1); 388 btv->i2c_rc = i2c_bit_add_bus(&btv->c.i2c_adap); 389 } 390 if (0 == btv->i2c_rc && i2c_scan) 391 do_i2c_scan(btv->c.v4l2_dev.name, &btv->i2c_client); 392 393 return btv->i2c_rc; 394 } 395 396 int fini_bttv_i2c(struct bttv *btv) 397 { 398 if (btv->i2c_rc == 0) 399 i2c_del_adapter(&btv->c.i2c_adap); 400 401 return 0; 402 } 403