1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 4 bttv-cards.c 5 6 this file has configuration information - card-specific stuff 7 like the big tvcards array for the most part 8 9 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) 10 & Marcus Metzler (mocm@thp.uni-koeln.de) 11 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de> 12 13 14 */ 15 16 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 17 18 #include <linux/delay.h> 19 #include <linux/module.h> 20 #include <linux/kmod.h> 21 #include <linux/init.h> 22 #include <linux/pci.h> 23 #include <linux/vmalloc.h> 24 #include <linux/firmware.h> 25 #include <net/checksum.h> 26 27 #include <asm/unaligned.h> 28 #include <asm/io.h> 29 30 #include "bttvp.h" 31 #include <media/v4l2-common.h> 32 #include <media/i2c/tvaudio.h> 33 #include "bttv-audio-hook.h" 34 35 /* fwd decl */ 36 static void boot_msp34xx(struct bttv *btv, int pin); 37 static void hauppauge_eeprom(struct bttv *btv); 38 static void avermedia_eeprom(struct bttv *btv); 39 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]); 40 static void modtec_eeprom(struct bttv *btv); 41 static void init_PXC200(struct bttv *btv); 42 static void init_RTV24(struct bttv *btv); 43 static void init_PCI8604PW(struct bttv *btv); 44 45 static void rv605_muxsel(struct bttv *btv, unsigned int input); 46 static void eagle_muxsel(struct bttv *btv, unsigned int input); 47 static void xguard_muxsel(struct bttv *btv, unsigned int input); 48 static void ivc120_muxsel(struct bttv *btv, unsigned int input); 49 static void gvc1100_muxsel(struct bttv *btv, unsigned int input); 50 51 static void PXC200_muxsel(struct bttv *btv, unsigned int input); 52 53 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input); 54 static void picolo_tetra_init(struct bttv *btv); 55 56 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input); 57 static void tibetCS16_init(struct bttv *btv); 58 59 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input); 60 static void kodicom4400r_init(struct bttv *btv); 61 62 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input); 63 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input); 64 65 static void geovision_muxsel(struct bttv *btv, unsigned int input); 66 67 static void phytec_muxsel(struct bttv *btv, unsigned int input); 68 69 static void gv800s_muxsel(struct bttv *btv, unsigned int input); 70 static void gv800s_init(struct bttv *btv); 71 72 static void td3116_muxsel(struct bttv *btv, unsigned int input); 73 74 static int terratec_active_radio_upgrade(struct bttv *btv); 75 static int tea575x_init(struct bttv *btv); 76 static void identify_by_eeprom(struct bttv *btv, 77 unsigned char eeprom_data[256]); 78 static int pvr_boot(struct bttv *btv); 79 80 /* config variables */ 81 static unsigned int triton1; 82 static unsigned int vsfx; 83 static unsigned int latency = UNSET; 84 85 static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 86 static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 87 static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 88 static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 89 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 90 static unsigned int audiodev[BTTV_MAX]; 91 static unsigned int saa6588[BTTV_MAX]; 92 static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL }; 93 static unsigned int autoload = UNSET; 94 static unsigned int gpiomask = UNSET; 95 static unsigned int audioall = UNSET; 96 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET }; 97 98 /* insmod options */ 99 module_param(triton1, int, 0444); 100 module_param(vsfx, int, 0444); 101 module_param(latency, int, 0444); 102 module_param(gpiomask, int, 0444); 103 module_param(audioall, int, 0444); 104 module_param(autoload, int, 0444); 105 106 module_param_array(card, int, NULL, 0444); 107 module_param_array(pll, int, NULL, 0444); 108 module_param_array(tuner, int, NULL, 0444); 109 module_param_array(svhs, int, NULL, 0444); 110 module_param_array(remote, int, NULL, 0444); 111 module_param_array(audiodev, int, NULL, 0444); 112 module_param_array(audiomux, int, NULL, 0444); 113 114 MODULE_PARM_DESC(triton1, "set ETBF pci config bit [enable bug compatibility for triton1 + others]"); 115 MODULE_PARM_DESC(vsfx, "set VSFX pci config bit [yet another chipset flaw workaround]"); 116 MODULE_PARM_DESC(latency,"pci latency timer"); 117 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list"); 118 MODULE_PARM_DESC(pll, "specify installed crystal (0=none, 28=28 MHz, 35=35 MHz, 14=14 MHz)"); 119 MODULE_PARM_DESC(tuner,"specify installed tuner type"); 120 MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore"); 121 MODULE_PARM_DESC(audiodev, "specify audio device:\n" 122 "\t\t-1 = no audio\n" 123 "\t\t 0 = autodetect (default)\n" 124 "\t\t 1 = msp3400\n" 125 "\t\t 2 = tda7432\n" 126 "\t\t 3 = tvaudio"); 127 MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition."); 128 129 MODULE_FIRMWARE("hcwamc.rbf"); 130 131 /* I2C addresses list */ 132 #define I2C_ADDR_TDA7432 0x8a 133 #define I2C_ADDR_MSP3400 0x80 134 #define I2C_ADDR_MSP3400_ALT 0x88 135 136 137 /* ----------------------------------------------------------------------- */ 138 /* list of card IDs for bt878+ cards */ 139 140 static struct CARD { 141 unsigned id; 142 int cardnr; 143 char *name; 144 } cards[] = { 145 { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" }, 146 { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" }, 147 { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" }, 148 { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" }, 149 { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" }, 150 { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" }, 151 { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" }, 152 { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" }, 153 { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" }, 154 155 { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" }, 156 { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" }, 157 158 { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, 159 { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" }, 160 { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" }, 161 { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, 162 { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, 163 { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" }, 164 { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" }, 165 { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" }, 166 { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" }, 167 168 { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" }, 169 /* some cards ship with byteswapped IDs ... */ 170 { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" }, 171 { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" }, 172 /* this seems to happen as well ... */ 173 { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" }, 174 175 { 0x3000121a, BTTV_BOARD_VOODOOTV_200, "3Dfx VoodooTV 200" }, 176 { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM" }, 177 { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" }, 178 179 { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" }, 180 { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" }, 181 { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" }, 182 { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" }, 183 { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" }, 184 { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" }, 185 { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" }, 186 187 { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" }, 188 { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" }, 189 { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" }, 190 { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" }, 191 { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" }, 192 193 { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" }, 194 { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" }, 195 { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" }, 196 { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" }, 197 198 { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" }, 199 { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" }, 200 /* clashes with FlyVideo 201 *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */ 202 { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" }, 203 { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */ 204 { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */ 205 { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */ 206 207 { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, 208 { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, 209 { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, 210 { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, 211 { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, 212 213 { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" }, 214 { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" }, 215 { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" }, 216 { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" }, 217 { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" }, 218 219 { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" }, 220 { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" }, 221 { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" }, 222 { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" }, 223 224 { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" }, 225 { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" }, 226 { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" }, 227 { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" }, 228 229 { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" }, 230 { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" }, 231 { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" }, 232 { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" }, 233 { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" }, 234 { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" }, 235 { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" }, 236 { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" }, 237 { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" }, 238 { 0xa1550800, BTTV_BOARD_IVC200, "IVC-200" }, 239 { 0xa1550801, BTTV_BOARD_IVC200, "IVC-200" }, 240 { 0xa1550802, BTTV_BOARD_IVC200, "IVC-200" }, 241 { 0xa1550803, BTTV_BOARD_IVC200, "IVC-200" }, 242 { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" }, 243 { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" }, 244 { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" }, 245 { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" }, 246 { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" }, 247 { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" }, 248 { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" }, 249 { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" }, 250 { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" }, 251 { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" }, 252 { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" }, 253 { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" }, 254 { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" }, 255 { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" }, 256 { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" }, 257 { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" }, 258 { 0xf0500000, BTTV_BOARD_IVCE8784, "IVCE-8784" }, 259 { 0xf0500001, BTTV_BOARD_IVCE8784, "IVCE-8784" }, 260 { 0xf0500002, BTTV_BOARD_IVCE8784, "IVCE-8784" }, 261 { 0xf0500003, BTTV_BOARD_IVCE8784, "IVCE-8784" }, 262 263 { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" }, 264 { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" }, 265 266 { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" }, 267 { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" }, 268 { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" }, 269 { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" }, 270 { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" }, 271 { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" }, 272 273 { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" }, 274 { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" }, 275 276 { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" }, 277 { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, 278 { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, 279 { 0x03116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 311" }, 280 { 0x06116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 611" }, 281 { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" }, 282 { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" }, 283 { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" }, 284 { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" }, 285 { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" }, 286 287 { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" }, 288 { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" }, 289 290 { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" }, 291 { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" }, 292 { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" }, 293 { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" }, 294 295 { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" }, 296 297 { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" }, 298 { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" }, 299 300 /* likely broken, vendor id doesn't match the other magic views ... 301 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */ 302 303 /* Duplicate PCI ID, reconfigure for this board during the eeprom read. 304 * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */ 305 306 { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2, "Conceptronic CTVFMi v2"}, 307 308 /* DVB cards (using pci function .1 for mpeg data xfer) */ 309 { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" }, 310 { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" }, 311 { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"}, 312 { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" }, 313 { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" }, 314 { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" }, 315 { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" }, 316 { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" }, 317 { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" }, 318 { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" }, 319 { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" }, 320 { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "}, 321 { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" }, 322 { 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" }, 323 { 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" }, 324 { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" }, 325 { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" }, 326 { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" }, 327 { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" }, 328 329 { 0x15401830, BTTV_BOARD_PV183, "Provideo PV183-1" }, 330 { 0x15401831, BTTV_BOARD_PV183, "Provideo PV183-2" }, 331 { 0x15401832, BTTV_BOARD_PV183, "Provideo PV183-3" }, 332 { 0x15401833, BTTV_BOARD_PV183, "Provideo PV183-4" }, 333 { 0x15401834, BTTV_BOARD_PV183, "Provideo PV183-5" }, 334 { 0x15401835, BTTV_BOARD_PV183, "Provideo PV183-6" }, 335 { 0x15401836, BTTV_BOARD_PV183, "Provideo PV183-7" }, 336 { 0x15401837, BTTV_BOARD_PV183, "Provideo PV183-8" }, 337 { 0x3116f200, BTTV_BOARD_TVT_TD3116, "Tongwei Video Technology TD-3116" }, 338 { 0x02280279, BTTV_BOARD_APOSONIC_WDVR, "Aposonic W-DVR" }, 339 { 0, -1, NULL } 340 }; 341 342 /* ----------------------------------------------------------------------- */ 343 /* array with description for bt848 / bt878 tv/grabber cards */ 344 345 struct tvcard bttv_tvcards[] = { 346 /* ---- card 0x00 ---------------------------------- */ 347 [BTTV_BOARD_UNKNOWN] = { 348 .name = " *** UNKNOWN/GENERIC *** ", 349 .video_inputs = 4, 350 .svhs = 2, 351 .muxsel = MUXSEL(2, 3, 1, 0), 352 .tuner_type = UNSET, 353 .tuner_addr = ADDR_UNSET, 354 }, 355 [BTTV_BOARD_MIRO] = { 356 .name = "MIRO PCTV", 357 .video_inputs = 4, 358 /* .audio_inputs= 1, */ 359 .svhs = 2, 360 .gpiomask = 15, 361 .muxsel = MUXSEL(2, 3, 1, 1), 362 .gpiomux = { 2, 0, 0, 0 }, 363 .gpiomute = 10, 364 .tuner_type = UNSET, 365 .tuner_addr = ADDR_UNSET, 366 }, 367 [BTTV_BOARD_HAUPPAUGE] = { 368 .name = "Hauppauge (bt848)", 369 .video_inputs = 4, 370 /* .audio_inputs= 1, */ 371 .svhs = 2, 372 .gpiomask = 7, 373 .muxsel = MUXSEL(2, 3, 1, 1), 374 .gpiomux = { 0, 1, 2, 3 }, 375 .gpiomute = 4, 376 .tuner_type = UNSET, 377 .tuner_addr = ADDR_UNSET, 378 }, 379 [BTTV_BOARD_STB] = { 380 .name = "STB, Gateway P/N 6000699 (bt848)", 381 .video_inputs = 3, 382 /* .audio_inputs= 1, */ 383 .svhs = 2, 384 .gpiomask = 7, 385 .muxsel = MUXSEL(2, 3, 1, 1), 386 .gpiomux = { 4, 0, 2, 3 }, 387 .gpiomute = 1, 388 .no_msp34xx = 1, 389 .tuner_type = TUNER_PHILIPS_NTSC, 390 .tuner_addr = ADDR_UNSET, 391 .pll = PLL_28, 392 .has_radio = 1, 393 }, 394 395 /* ---- card 0x04 ---------------------------------- */ 396 [BTTV_BOARD_INTEL] = { 397 .name = "Intel Create and Share PCI/ Smart Video Recorder III", 398 .video_inputs = 4, 399 /* .audio_inputs= 0, */ 400 .svhs = 2, 401 .gpiomask = 0, 402 .muxsel = MUXSEL(2, 3, 1, 1), 403 .gpiomux = { 0 }, 404 .tuner_type = TUNER_ABSENT, 405 .tuner_addr = ADDR_UNSET, 406 }, 407 [BTTV_BOARD_DIAMOND] = { 408 .name = "Diamond DTV2000", 409 .video_inputs = 4, 410 /* .audio_inputs= 1, */ 411 .svhs = 2, 412 .gpiomask = 3, 413 .muxsel = MUXSEL(2, 3, 1, 0), 414 .gpiomux = { 0, 1, 0, 1 }, 415 .gpiomute = 3, 416 .tuner_type = UNSET, 417 .tuner_addr = ADDR_UNSET, 418 }, 419 [BTTV_BOARD_AVERMEDIA] = { 420 .name = "AVerMedia TVPhone", 421 .video_inputs = 3, 422 /* .audio_inputs= 1, */ 423 .svhs = 3, 424 .muxsel = MUXSEL(2, 3, 1, 1), 425 .gpiomask = 0x0f, 426 .gpiomux = { 0x0c, 0x04, 0x08, 0x04 }, 427 /* 0x04 for some cards ?? */ 428 .tuner_type = UNSET, 429 .tuner_addr = ADDR_UNSET, 430 .audio_mode_gpio= avermedia_tvphone_audio, 431 .has_remote = 1, 432 }, 433 [BTTV_BOARD_MATRIX_VISION] = { 434 .name = "MATRIX-Vision MV-Delta", 435 .video_inputs = 5, 436 /* .audio_inputs= 1, */ 437 .svhs = 3, 438 .gpiomask = 0, 439 .muxsel = MUXSEL(2, 3, 1, 0, 0), 440 .gpiomux = { 0 }, 441 .tuner_type = TUNER_ABSENT, 442 .tuner_addr = ADDR_UNSET, 443 }, 444 445 /* ---- card 0x08 ---------------------------------- */ 446 [BTTV_BOARD_FLYVIDEO] = { 447 .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26", 448 .video_inputs = 4, 449 /* .audio_inputs= 1, */ 450 .svhs = 2, 451 .gpiomask = 0xc00, 452 .muxsel = MUXSEL(2, 3, 1, 1), 453 .gpiomux = { 0, 0xc00, 0x800, 0x400 }, 454 .gpiomute = 0xc00, 455 .pll = PLL_28, 456 .tuner_type = UNSET, 457 .tuner_addr = ADDR_UNSET, 458 }, 459 [BTTV_BOARD_TURBOTV] = { 460 .name = "IMS/IXmicro TurboTV", 461 .video_inputs = 3, 462 /* .audio_inputs= 1, */ 463 .svhs = 2, 464 .gpiomask = 3, 465 .muxsel = MUXSEL(2, 3, 1, 1), 466 .gpiomux = { 1, 1, 2, 3 }, 467 .pll = PLL_28, 468 .tuner_type = TUNER_TEMIC_PAL, 469 .tuner_addr = ADDR_UNSET, 470 }, 471 [BTTV_BOARD_HAUPPAUGE878] = { 472 .name = "Hauppauge (bt878)", 473 .video_inputs = 4, 474 /* .audio_inputs= 1, */ 475 .svhs = 2, 476 .gpiomask = 0x0f, /* old: 7 */ 477 .muxsel = MUXSEL(2, 0, 1, 1), 478 .gpiomux = { 0, 1, 2, 3 }, 479 .gpiomute = 4, 480 .pll = PLL_28, 481 .tuner_type = UNSET, 482 .tuner_addr = ADDR_UNSET, 483 }, 484 [BTTV_BOARD_MIROPRO] = { 485 .name = "MIRO PCTV pro", 486 .video_inputs = 3, 487 /* .audio_inputs= 1, */ 488 .svhs = 2, 489 .gpiomask = 0x3014f, 490 .muxsel = MUXSEL(2, 3, 1, 1), 491 .gpiomux = { 0x20001,0x10001, 0, 0 }, 492 .gpiomute = 10, 493 .tuner_type = UNSET, 494 .tuner_addr = ADDR_UNSET, 495 }, 496 497 /* ---- card 0x0c ---------------------------------- */ 498 [BTTV_BOARD_ADSTECH_TV] = { 499 .name = "ADS Technologies Channel Surfer TV (bt848)", 500 .video_inputs = 3, 501 /* .audio_inputs= 1, */ 502 .svhs = 2, 503 .gpiomask = 15, 504 .muxsel = MUXSEL(2, 3, 1, 1), 505 .gpiomux = { 13, 14, 11, 7 }, 506 .tuner_type = UNSET, 507 .tuner_addr = ADDR_UNSET, 508 }, 509 [BTTV_BOARD_AVERMEDIA98] = { 510 .name = "AVerMedia TVCapture 98", 511 .video_inputs = 3, 512 /* .audio_inputs= 4, */ 513 .svhs = 2, 514 .gpiomask = 15, 515 .muxsel = MUXSEL(2, 3, 1, 1), 516 .gpiomux = { 13, 14, 11, 7 }, 517 .msp34xx_alt = 1, 518 .pll = PLL_28, 519 .tuner_type = TUNER_PHILIPS_PAL, 520 .tuner_addr = ADDR_UNSET, 521 .audio_mode_gpio= avermedia_tv_stereo_audio, 522 .no_gpioirq = 1, 523 }, 524 [BTTV_BOARD_VHX] = { 525 .name = "Aimslab Video Highway Xtreme (VHX)", 526 .video_inputs = 3, 527 /* .audio_inputs= 1, */ 528 .svhs = 2, 529 .gpiomask = 7, 530 .muxsel = MUXSEL(2, 3, 1, 1), 531 .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */ 532 .gpiomute = 4, 533 .pll = PLL_28, 534 .tuner_type = UNSET, 535 .tuner_addr = ADDR_UNSET, 536 }, 537 [BTTV_BOARD_ZOLTRIX] = { 538 .name = "Zoltrix TV-Max", 539 .video_inputs = 3, 540 /* .audio_inputs= 1, */ 541 .svhs = 2, 542 .gpiomask = 15, 543 .muxsel = MUXSEL(2, 3, 1, 1), 544 .gpiomux = { 0, 0, 1, 0 }, 545 .gpiomute = 10, 546 .tuner_type = UNSET, 547 .tuner_addr = ADDR_UNSET, 548 }, 549 550 /* ---- card 0x10 ---------------------------------- */ 551 [BTTV_BOARD_PIXVIEWPLAYTV] = { 552 .name = "Prolink Pixelview PlayTV (bt878)", 553 .video_inputs = 3, 554 /* .audio_inputs= 1, */ 555 .svhs = 2, 556 .gpiomask = 0x01fe00, 557 .muxsel = MUXSEL(2, 3, 1, 1), 558 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */ 559 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, 560 .gpiomute = 0x002000, 561 .pll = PLL_28, 562 .tuner_type = UNSET, 563 .tuner_addr = ADDR_UNSET, 564 }, 565 [BTTV_BOARD_WINVIEW_601] = { 566 .name = "Leadtek WinView 601", 567 .video_inputs = 3, 568 /* .audio_inputs= 1, */ 569 .svhs = 2, 570 .gpiomask = 0x8300f8, 571 .muxsel = MUXSEL(2, 3, 1, 1, 0), 572 .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 }, 573 .gpiomute = 0xcfa007, 574 .tuner_type = UNSET, 575 .tuner_addr = ADDR_UNSET, 576 .volume_gpio = winview_volume, 577 .has_radio = 1, 578 }, 579 [BTTV_BOARD_AVEC_INTERCAP] = { 580 .name = "AVEC Intercapture", 581 .video_inputs = 3, 582 /* .audio_inputs= 2, */ 583 .svhs = 2, 584 .gpiomask = 0, 585 .muxsel = MUXSEL(2, 3, 1, 1), 586 .gpiomux = { 1, 0, 0, 0 }, 587 .tuner_type = UNSET, 588 .tuner_addr = ADDR_UNSET, 589 }, 590 [BTTV_BOARD_LIFE_FLYKIT] = { 591 .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)", 592 .video_inputs = 4, 593 /* .audio_inputs= 1, */ 594 .svhs = NO_SVHS, 595 .gpiomask = 0x8dff00, 596 .muxsel = MUXSEL(2, 3, 1, 1), 597 .gpiomux = { 0 }, 598 .no_msp34xx = 1, 599 .tuner_type = TUNER_ABSENT, 600 .tuner_addr = ADDR_UNSET, 601 }, 602 603 /* ---- card 0x14 ---------------------------------- */ 604 [BTTV_BOARD_CEI_RAFFLES] = { 605 .name = "CEI Raffles Card", 606 .video_inputs = 3, 607 /* .audio_inputs= 3, */ 608 .svhs = 2, 609 .muxsel = MUXSEL(2, 3, 1, 1), 610 .tuner_type = UNSET, 611 .tuner_addr = ADDR_UNSET, 612 }, 613 [BTTV_BOARD_CONFERENCETV] = { 614 .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50", 615 .video_inputs = 4, 616 /* .audio_inputs= 2, tuner, line in */ 617 .svhs = 2, 618 .gpiomask = 0x1800, 619 .muxsel = MUXSEL(2, 3, 1, 1), 620 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 621 .gpiomute = 0x1800, 622 .pll = PLL_28, 623 .tuner_type = TUNER_PHILIPS_PAL_I, 624 .tuner_addr = ADDR_UNSET, 625 }, 626 [BTTV_BOARD_PHOEBE_TVMAS] = { 627 .name = "Askey CPH050/ Phoebe Tv Master + FM", 628 .video_inputs = 3, 629 /* .audio_inputs= 1, */ 630 .svhs = 2, 631 .gpiomask = 0xc00, 632 .muxsel = MUXSEL(2, 3, 1, 1), 633 .gpiomux = { 0, 1, 0x800, 0x400 }, 634 .gpiomute = 0xc00, 635 .pll = PLL_28, 636 .tuner_type = UNSET, 637 .tuner_addr = ADDR_UNSET, 638 }, 639 [BTTV_BOARD_MODTEC_205] = { 640 .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878", 641 .video_inputs = 3, 642 /* .audio_inputs= 1, */ 643 .svhs = NO_SVHS, 644 .has_dig_in = 1, 645 .gpiomask = 7, 646 .muxsel = MUXSEL(2, 3, 0), /* input 2 is digital */ 647 /* .digital_mode= DIGITAL_MODE_CAMERA, */ 648 .gpiomux = { 0, 0, 0, 0 }, 649 .no_msp34xx = 1, 650 .pll = PLL_28, 651 .tuner_type = TUNER_ALPS_TSBB5_PAL_I, 652 .tuner_addr = ADDR_UNSET, 653 }, 654 655 /* ---- card 0x18 ---------------------------------- */ 656 [BTTV_BOARD_MAGICTVIEW061] = { 657 .name = "Askey CPH05X/06X (bt878) [many vendors]", 658 .video_inputs = 3, 659 /* .audio_inputs= 1, */ 660 .svhs = 2, 661 .gpiomask = 0xe00, 662 .muxsel = MUXSEL(2, 3, 1, 1), 663 .gpiomux = {0x400, 0x400, 0x400, 0x400 }, 664 .gpiomute = 0xc00, 665 .pll = PLL_28, 666 .tuner_type = UNSET, 667 .tuner_addr = ADDR_UNSET, 668 .has_remote = 1, 669 .has_radio = 1, /* not every card has radio */ 670 }, 671 [BTTV_BOARD_VOBIS_BOOSTAR] = { 672 .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar", 673 .video_inputs = 3, 674 /* .audio_inputs= 1, */ 675 .svhs = 2, 676 .gpiomask = 0x1f0fff, 677 .muxsel = MUXSEL(2, 3, 1, 1), 678 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, 679 .gpiomute = 0x40000, 680 .tuner_type = TUNER_PHILIPS_PAL, 681 .tuner_addr = ADDR_UNSET, 682 .audio_mode_gpio= terratv_audio, 683 }, 684 [BTTV_BOARD_HAUPPAUG_WCAM] = { 685 .name = "Hauppauge WinCam newer (bt878)", 686 .video_inputs = 4, 687 /* .audio_inputs= 1, */ 688 .svhs = 3, 689 .gpiomask = 7, 690 .muxsel = MUXSEL(2, 0, 1, 1), 691 .gpiomux = { 0, 1, 2, 3 }, 692 .gpiomute = 4, 693 .tuner_type = UNSET, 694 .tuner_addr = ADDR_UNSET, 695 }, 696 [BTTV_BOARD_MAXI] = { 697 .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50", 698 .video_inputs = 4, 699 /* .audio_inputs= 2, */ 700 .svhs = 2, 701 .gpiomask = 0x1800, 702 .muxsel = MUXSEL(2, 3, 1, 1), 703 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 704 .gpiomute = 0x1800, 705 .pll = PLL_28, 706 .tuner_type = TUNER_PHILIPS_SECAM, 707 .tuner_addr = ADDR_UNSET, 708 }, 709 710 /* ---- card 0x1c ---------------------------------- */ 711 [BTTV_BOARD_TERRATV] = { 712 .name = "Terratec TerraTV+ Version 1.1 (bt878)", 713 .video_inputs = 3, 714 /* .audio_inputs= 1, */ 715 .svhs = 2, 716 .gpiomask = 0x1f0fff, 717 .muxsel = MUXSEL(2, 3, 1, 1), 718 .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 }, 719 .gpiomute = 0x40000, 720 .tuner_type = TUNER_PHILIPS_PAL, 721 .tuner_addr = ADDR_UNSET, 722 .audio_mode_gpio= terratv_audio, 723 /* GPIO wiring: 724 External 20 pin connector (for Active Radio Upgrade board) 725 gpio00: i2c-sda 726 gpio01: i2c-scl 727 gpio02: om5610-data 728 gpio03: om5610-clk 729 gpio04: om5610-wre 730 gpio05: om5610-stereo 731 gpio06: rds6588-davn 732 gpio07: Pin 7 n.c. 733 gpio08: nIOW 734 gpio09+10: nIOR, nSEL ?? (bt878) 735 gpio09: nIOR (bt848) 736 gpio10: nSEL (bt848) 737 Sound Routing: 738 gpio16: u2-A0 (1st 4052bt) 739 gpio17: u2-A1 740 gpio18: u2-nEN 741 gpio19: u4-A0 (2nd 4052) 742 gpio20: u4-A1 743 u4-nEN - GND 744 Btspy: 745 00000 : Cdrom (internal audio input) 746 10000 : ext. Video audio input 747 20000 : TV Mono 748 a0000 : TV Mono/2 749 1a0000 : TV Stereo 750 30000 : Radio 751 40000 : Mute 752 */ 753 754 }, 755 [BTTV_BOARD_PXC200] = { 756 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */ 757 .name = "Imagenation PXC200", 758 .video_inputs = 5, 759 /* .audio_inputs= 1, */ 760 .svhs = 1, /* was: 4 */ 761 .gpiomask = 0, 762 .muxsel = MUXSEL(2, 3, 1, 0, 0), 763 .gpiomux = { 0 }, 764 .tuner_type = TUNER_ABSENT, 765 .tuner_addr = ADDR_UNSET, 766 .muxsel_hook = PXC200_muxsel, 767 768 }, 769 [BTTV_BOARD_FLYVIDEO_98] = { 770 .name = "Lifeview FlyVideo 98 LR50", 771 .video_inputs = 4, 772 /* .audio_inputs= 1, */ 773 .svhs = 2, 774 .gpiomask = 0x1800, /* 0x8dfe00 */ 775 .muxsel = MUXSEL(2, 3, 1, 1), 776 .gpiomux = { 0, 0x0800, 0x1000, 0x1000 }, 777 .gpiomute = 0x1800, 778 .pll = PLL_28, 779 .tuner_type = UNSET, 780 .tuner_addr = ADDR_UNSET, 781 }, 782 [BTTV_BOARD_IPROTV] = { 783 .name = "Formac iProTV, Formac ProTV I (bt848)", 784 .video_inputs = 4, 785 /* .audio_inputs= 1, */ 786 .svhs = 3, 787 .gpiomask = 1, 788 .muxsel = MUXSEL(2, 3, 1, 1), 789 .gpiomux = { 1, 0, 0, 0 }, 790 .pll = PLL_28, 791 .tuner_type = TUNER_PHILIPS_PAL, 792 .tuner_addr = ADDR_UNSET, 793 }, 794 795 /* ---- card 0x20 ---------------------------------- */ 796 [BTTV_BOARD_INTEL_C_S_PCI] = { 797 .name = "Intel Create and Share PCI/ Smart Video Recorder III", 798 .video_inputs = 4, 799 /* .audio_inputs= 0, */ 800 .svhs = 2, 801 .gpiomask = 0, 802 .muxsel = MUXSEL(2, 3, 1, 1), 803 .gpiomux = { 0 }, 804 .tuner_type = TUNER_ABSENT, 805 .tuner_addr = ADDR_UNSET, 806 }, 807 [BTTV_BOARD_TERRATVALUE] = { 808 .name = "Terratec TerraTValue Version Bt878", 809 .video_inputs = 3, 810 /* .audio_inputs= 1, */ 811 .svhs = 2, 812 .gpiomask = 0xffff00, 813 .muxsel = MUXSEL(2, 3, 1, 1), 814 .gpiomux = { 0x500, 0, 0x300, 0x900 }, 815 .gpiomute = 0x900, 816 .pll = PLL_28, 817 .tuner_type = TUNER_PHILIPS_PAL, 818 .tuner_addr = ADDR_UNSET, 819 }, 820 [BTTV_BOARD_WINFAST2000] = { 821 .name = "Leadtek WinFast 2000/ WinFast 2000 XP", 822 .video_inputs = 4, 823 /* .audio_inputs= 1, */ 824 .svhs = 2, 825 /* TV, CVid, SVid, CVid over SVid connector */ 826 .muxsel = MUXSEL(2, 3, 1, 1, 0), 827 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */ 828 .gpiomask = 0xb33000, 829 .gpiomux = { 0x122000,0x1000,0x0000,0x620000 }, 830 .gpiomute = 0x800000, 831 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !) 832 gpio23 -- hef4052:nEnable (0x800000) 833 gpio12 -- hef4052:A1 834 gpio13 -- hef4052:A0 835 0x0000: external audio 836 0x1000: FM 837 0x2000: TV 838 0x3000: n.c. 839 Note: There exists another variant "Winfast 2000" with tv stereo !? 840 Note: eeprom only contains FF and pci subsystem id 107d:6606 841 */ 842 .pll = PLL_28, 843 .has_radio = 1, 844 .tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */ 845 .tuner_addr = ADDR_UNSET, 846 .audio_mode_gpio= winfast2000_audio, 847 .has_remote = 1, 848 }, 849 [BTTV_BOARD_CHRONOS_VS2] = { 850 .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II", 851 .video_inputs = 4, 852 /* .audio_inputs= 3, */ 853 .svhs = 2, 854 .gpiomask = 0x1800, 855 .muxsel = MUXSEL(2, 3, 1, 1), 856 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 857 .gpiomute = 0x1800, 858 .pll = PLL_28, 859 .tuner_type = UNSET, 860 .tuner_addr = ADDR_UNSET, 861 }, 862 863 /* ---- card 0x24 ---------------------------------- */ 864 [BTTV_BOARD_TYPHOON_TVIEW] = { 865 .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner", 866 .video_inputs = 4, 867 /* .audio_inputs= 3, */ 868 .svhs = 2, 869 .gpiomask = 0x1800, 870 .muxsel = MUXSEL(2, 3, 1, 1), 871 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 872 .gpiomute = 0x1800, 873 .pll = PLL_28, 874 .tuner_type = UNSET, 875 .tuner_addr = ADDR_UNSET, 876 .has_radio = 1, 877 }, 878 [BTTV_BOARD_PXELVWPLTVPRO] = { 879 .name = "Prolink PixelView PlayTV pro", 880 .video_inputs = 3, 881 /* .audio_inputs= 1, */ 882 .svhs = 2, 883 .gpiomask = 0xff, 884 .muxsel = MUXSEL(2, 3, 1, 1), 885 .gpiomux = { 0x21, 0x20, 0x24, 0x2c }, 886 .gpiomute = 0x29, 887 .no_msp34xx = 1, 888 .pll = PLL_28, 889 .tuner_type = UNSET, 890 .tuner_addr = ADDR_UNSET, 891 }, 892 [BTTV_BOARD_MAGICTVIEW063] = { 893 .name = "Askey CPH06X TView99", 894 .video_inputs = 4, 895 /* .audio_inputs= 1, */ 896 .svhs = 2, 897 .gpiomask = 0x551e00, 898 .muxsel = MUXSEL(2, 3, 1, 0), 899 .gpiomux = { 0x551400, 0x551200, 0, 0 }, 900 .gpiomute = 0x551c00, 901 .pll = PLL_28, 902 .tuner_type = TUNER_PHILIPS_PAL_I, 903 .tuner_addr = ADDR_UNSET, 904 .has_remote = 1, 905 }, 906 [BTTV_BOARD_PINNACLE] = { 907 .name = "Pinnacle PCTV Studio/Rave", 908 .video_inputs = 3, 909 /* .audio_inputs= 1, */ 910 .svhs = 2, 911 .gpiomask = 0x03000F, 912 .muxsel = MUXSEL(2, 3, 1, 1), 913 .gpiomux = { 2, 0xd0001, 0, 0 }, 914 .gpiomute = 1, 915 .pll = PLL_28, 916 .tuner_type = UNSET, 917 .tuner_addr = ADDR_UNSET, 918 }, 919 920 /* ---- card 0x28 ---------------------------------- */ 921 [BTTV_BOARD_STB2] = { 922 .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100", 923 .video_inputs = 3, 924 /* .audio_inputs= 1, */ 925 .svhs = 2, 926 .gpiomask = 7, 927 .muxsel = MUXSEL(2, 3, 1, 1), 928 .gpiomux = { 4, 0, 2, 3 }, 929 .gpiomute = 1, 930 .no_msp34xx = 1, 931 .tuner_type = TUNER_PHILIPS_NTSC, 932 .tuner_addr = ADDR_UNSET, 933 .pll = PLL_28, 934 .has_radio = 1, 935 }, 936 [BTTV_BOARD_AVPHONE98] = { 937 .name = "AVerMedia TVPhone 98", 938 .video_inputs = 3, 939 /* .audio_inputs= 4, */ 940 .svhs = 2, 941 .gpiomask = 15, 942 .muxsel = MUXSEL(2, 3, 1, 1), 943 .gpiomux = { 13, 4, 11, 7 }, 944 .pll = PLL_28, 945 .tuner_type = UNSET, 946 .tuner_addr = ADDR_UNSET, 947 .has_radio = 1, 948 .audio_mode_gpio= avermedia_tvphone_audio, 949 }, 950 [BTTV_BOARD_PV951] = { 951 .name = "ProVideo PV951", /* pic16c54 */ 952 .video_inputs = 3, 953 /* .audio_inputs= 1, */ 954 .svhs = 2, 955 .gpiomask = 0, 956 .muxsel = MUXSEL(2, 3, 1, 1), 957 .gpiomux = { 0, 0, 0, 0}, 958 .no_msp34xx = 1, 959 .pll = PLL_28, 960 .tuner_type = TUNER_PHILIPS_PAL_I, 961 .tuner_addr = ADDR_UNSET, 962 }, 963 [BTTV_BOARD_ONAIR_TV] = { 964 .name = "Little OnAir TV", 965 .video_inputs = 3, 966 /* .audio_inputs= 1, */ 967 .svhs = 2, 968 .gpiomask = 0xe00b, 969 .muxsel = MUXSEL(2, 3, 1, 1), 970 .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 }, 971 .gpiomute = 0xff3ffc, 972 .no_msp34xx = 1, 973 .tuner_type = UNSET, 974 .tuner_addr = ADDR_UNSET, 975 }, 976 977 /* ---- card 0x2c ---------------------------------- */ 978 [BTTV_BOARD_SIGMA_TVII_FM] = { 979 .name = "Sigma TVII-FM", 980 .video_inputs = 2, 981 /* .audio_inputs= 1, */ 982 .svhs = NO_SVHS, 983 .gpiomask = 3, 984 .muxsel = MUXSEL(2, 3, 1, 1), 985 .gpiomux = { 1, 1, 0, 2 }, 986 .gpiomute = 3, 987 .no_msp34xx = 1, 988 .pll = PLL_NONE, 989 .tuner_type = UNSET, 990 .tuner_addr = ADDR_UNSET, 991 }, 992 [BTTV_BOARD_MATRIX_VISION2] = { 993 .name = "MATRIX-Vision MV-Delta 2", 994 .video_inputs = 5, 995 /* .audio_inputs= 1, */ 996 .svhs = 3, 997 .gpiomask = 0, 998 .muxsel = MUXSEL(2, 3, 1, 0, 0), 999 .gpiomux = { 0 }, 1000 .no_msp34xx = 1, 1001 .pll = PLL_28, 1002 .tuner_type = TUNER_ABSENT, 1003 .tuner_addr = ADDR_UNSET, 1004 }, 1005 [BTTV_BOARD_ZOLTRIX_GENIE] = { 1006 .name = "Zoltrix Genie TV/FM", 1007 .video_inputs = 3, 1008 /* .audio_inputs= 1, */ 1009 .svhs = 2, 1010 .gpiomask = 0xbcf03f, 1011 .muxsel = MUXSEL(2, 3, 1, 1), 1012 .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 }, 1013 .gpiomute = 0xbcb03f, 1014 .no_msp34xx = 1, 1015 .pll = PLL_28, 1016 .tuner_type = TUNER_TEMIC_4039FR5_NTSC, 1017 .tuner_addr = ADDR_UNSET, 1018 }, 1019 [BTTV_BOARD_TERRATVRADIO] = { 1020 .name = "Terratec TV/Radio+", 1021 .video_inputs = 3, 1022 /* .audio_inputs= 1, */ 1023 .svhs = 2, 1024 .gpiomask = 0x70000, 1025 .muxsel = MUXSEL(2, 3, 1, 1), 1026 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, 1027 .gpiomute = 0x40000, 1028 .no_msp34xx = 1, 1029 .pll = PLL_35, 1030 .tuner_type = TUNER_PHILIPS_PAL_I, 1031 .tuner_addr = ADDR_UNSET, 1032 .has_radio = 1, 1033 }, 1034 1035 /* ---- card 0x30 ---------------------------------- */ 1036 [BTTV_BOARD_DYNALINK] = { 1037 .name = "Askey CPH03x/ Dynalink Magic TView", 1038 .video_inputs = 3, 1039 /* .audio_inputs= 1, */ 1040 .svhs = 2, 1041 .gpiomask = 15, 1042 .muxsel = MUXSEL(2, 3, 1, 1), 1043 .gpiomux = {2,0,0,0 }, 1044 .gpiomute = 1, 1045 .pll = PLL_28, 1046 .tuner_type = UNSET, 1047 .tuner_addr = ADDR_UNSET, 1048 }, 1049 [BTTV_BOARD_GVBCTV3PCI] = { 1050 .name = "IODATA GV-BCTV3/PCI", 1051 .video_inputs = 3, 1052 /* .audio_inputs= 1, */ 1053 .svhs = 2, 1054 .gpiomask = 0x010f00, 1055 .muxsel = MUXSEL(2, 3, 0, 0), 1056 .gpiomux = {0x10000, 0, 0x10000, 0 }, 1057 .no_msp34xx = 1, 1058 .pll = PLL_28, 1059 .tuner_type = TUNER_ALPS_TSHC6_NTSC, 1060 .tuner_addr = ADDR_UNSET, 1061 .audio_mode_gpio= gvbctv3pci_audio, 1062 }, 1063 [BTTV_BOARD_PXELVWPLTVPAK] = { 1064 .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP", 1065 .video_inputs = 5, 1066 /* .audio_inputs= 1, */ 1067 .svhs = 3, 1068 .has_dig_in = 1, 1069 .gpiomask = 0xAA0000, 1070 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */ 1071 /* .digital_mode= DIGITAL_MODE_CAMERA, */ 1072 .gpiomux = { 0x20000, 0, 0x80000, 0x80000 }, 1073 .gpiomute = 0xa8000, 1074 .no_msp34xx = 1, 1075 .pll = PLL_28, 1076 .tuner_type = TUNER_PHILIPS_PAL_I, 1077 .tuner_addr = ADDR_UNSET, 1078 .has_remote = 1, 1079 /* GPIO wiring: (different from Rev.4C !) 1080 GPIO17: U4.A0 (first hef4052bt) 1081 GPIO19: U4.A1 1082 GPIO20: U5.A1 (second hef4052bt) 1083 GPIO21: U4.nEN 1084 GPIO22: BT832 Reset Line 1085 GPIO23: A5,A0, U5,nEN 1086 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22 1087 */ 1088 }, 1089 [BTTV_BOARD_EAGLE] = { 1090 .name = "Eagle Wireless Capricorn2 (bt878A)", 1091 .video_inputs = 4, 1092 /* .audio_inputs= 1, */ 1093 .svhs = 2, 1094 .gpiomask = 7, 1095 .muxsel = MUXSEL(2, 0, 1, 1), 1096 .gpiomux = { 0, 1, 2, 3 }, 1097 .gpiomute = 4, 1098 .pll = PLL_28, 1099 .tuner_type = UNSET /* TUNER_ALPS_TMDH2_NTSC */, 1100 .tuner_addr = ADDR_UNSET, 1101 }, 1102 1103 /* ---- card 0x34 ---------------------------------- */ 1104 [BTTV_BOARD_PINNACLEPRO] = { 1105 /* David Härdeman <david@2gen.com> */ 1106 .name = "Pinnacle PCTV Studio Pro", 1107 .video_inputs = 4, 1108 /* .audio_inputs= 1, */ 1109 .svhs = 3, 1110 .gpiomask = 0x03000F, 1111 .muxsel = MUXSEL(2, 3, 1, 1), 1112 .gpiomux = { 1, 0xd0001, 0, 0 }, 1113 .gpiomute = 10, 1114 /* sound path (5 sources): 1115 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable) 1116 0= ext. Audio IN 1117 1= from MUX2 1118 2= Mono TV sound from Tuner 1119 3= not connected 1120 MUX2 (mask 0x30000): 1121 0,2,3= from MSP34xx 1122 1= FM stereo Radio from Tuner */ 1123 .pll = PLL_28, 1124 .tuner_type = UNSET, 1125 .tuner_addr = ADDR_UNSET, 1126 }, 1127 [BTTV_BOARD_TVIEW_RDS_FM] = { 1128 /* Claas Langbehn <claas@bigfoot.com>, 1129 Sven Grothklags <sven@upb.de> */ 1130 .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS", 1131 .video_inputs = 4, 1132 /* .audio_inputs= 3, */ 1133 .svhs = 2, 1134 .gpiomask = 0x1c, 1135 .muxsel = MUXSEL(2, 3, 1, 1), 1136 .gpiomux = { 0, 0, 0x10, 8 }, 1137 .gpiomute = 4, 1138 .pll = PLL_28, 1139 .tuner_type = TUNER_PHILIPS_PAL, 1140 .tuner_addr = ADDR_UNSET, 1141 .has_radio = 1, 1142 }, 1143 [BTTV_BOARD_LIFETEC_9415] = { 1144 /* Tim Röstermundt <rosterm@uni-muenster.de> 1145 in de.comp.os.unix.linux.hardware: 1146 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0 1147 gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff 1148 options tuner type=5 */ 1149 .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]", 1150 .video_inputs = 4, 1151 /* .audio_inputs= 1, */ 1152 .svhs = 2, 1153 .gpiomask = 0x18e0, 1154 .muxsel = MUXSEL(2, 3, 1, 1), 1155 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 }, 1156 .gpiomute = 0x18e0, 1157 /* For cards with tda9820/tda9821: 1158 0x0000: Tuner normal stereo 1159 0x0080: Tuner A2 SAP (second audio program = Zweikanalton) 1160 0x0880: Tuner A2 stereo */ 1161 .pll = PLL_28, 1162 .tuner_type = UNSET, 1163 .tuner_addr = ADDR_UNSET, 1164 }, 1165 [BTTV_BOARD_BESTBUY_EASYTV] = { 1166 /* Miguel Angel Alvarez <maacruz@navegalia.com> 1167 old Easy TV BT848 version (model CPH031) */ 1168 .name = "Askey CPH031/ BESTBUY Easy TV", 1169 .video_inputs = 4, 1170 /* .audio_inputs= 1, */ 1171 .svhs = 2, 1172 .gpiomask = 0xF, 1173 .muxsel = MUXSEL(2, 3, 1, 0), 1174 .gpiomux = { 2, 0, 0, 0 }, 1175 .gpiomute = 10, 1176 .pll = PLL_28, 1177 .tuner_type = TUNER_TEMIC_PAL, 1178 .tuner_addr = ADDR_UNSET, 1179 }, 1180 1181 /* ---- card 0x38 ---------------------------------- */ 1182 [BTTV_BOARD_FLYVIDEO_98FM] = { 1183 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */ 1184 .name = "Lifeview FlyVideo 98FM LR50", 1185 .video_inputs = 4, 1186 /* .audio_inputs= 3, */ 1187 .svhs = 2, 1188 .gpiomask = 0x1800, 1189 .muxsel = MUXSEL(2, 3, 1, 1), 1190 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 1191 .gpiomute = 0x1800, 1192 .pll = PLL_28, 1193 .tuner_type = TUNER_PHILIPS_PAL, 1194 .tuner_addr = ADDR_UNSET, 1195 }, 1196 /* This is the ultimate cheapo capture card 1197 * just a BT848A on a small PCB! 1198 * Steve Hosgood <steve@equiinet.com> */ 1199 [BTTV_BOARD_GRANDTEC] = { 1200 .name = "GrandTec 'Grand Video Capture' (Bt848)", 1201 .video_inputs = 2, 1202 /* .audio_inputs= 0, */ 1203 .svhs = 1, 1204 .gpiomask = 0, 1205 .muxsel = MUXSEL(3, 1), 1206 .gpiomux = { 0 }, 1207 .no_msp34xx = 1, 1208 .pll = PLL_35, 1209 .tuner_type = TUNER_ABSENT, 1210 .tuner_addr = ADDR_UNSET, 1211 }, 1212 [BTTV_BOARD_ASKEY_CPH060] = { 1213 /* Daniel Herrington <daniel.herrington@home.com> */ 1214 .name = "Askey CPH060/ Phoebe TV Master Only (No FM)", 1215 .video_inputs = 3, 1216 /* .audio_inputs= 1, */ 1217 .svhs = 2, 1218 .gpiomask = 0xe00, 1219 .muxsel = MUXSEL(2, 3, 1, 1), 1220 .gpiomux = { 0x400, 0x400, 0x400, 0x400 }, 1221 .gpiomute = 0x800, 1222 .pll = PLL_28, 1223 .tuner_type = TUNER_TEMIC_4036FY5_NTSC, 1224 .tuner_addr = ADDR_UNSET, 1225 }, 1226 [BTTV_BOARD_ASKEY_CPH03X] = { 1227 /* Matti Mottus <mottus@physic.ut.ee> */ 1228 .name = "Askey CPH03x TV Capturer", 1229 .video_inputs = 4, 1230 /* .audio_inputs= 1, */ 1231 .svhs = 2, 1232 .gpiomask = 0x03000F, 1233 .muxsel = MUXSEL(2, 3, 1, 0), 1234 .gpiomux = { 2, 0, 0, 0 }, 1235 .gpiomute = 1, 1236 .pll = PLL_28, 1237 .tuner_type = TUNER_TEMIC_PAL, 1238 .tuner_addr = ADDR_UNSET, 1239 .has_remote = 1, 1240 }, 1241 1242 /* ---- card 0x3c ---------------------------------- */ 1243 [BTTV_BOARD_MM100PCTV] = { 1244 /* Philip Blundell <philb@gnu.org> */ 1245 .name = "Modular Technology MM100PCTV", 1246 .video_inputs = 2, 1247 /* .audio_inputs= 2, */ 1248 .svhs = NO_SVHS, 1249 .gpiomask = 11, 1250 .muxsel = MUXSEL(2, 3, 1, 1), 1251 .gpiomux = { 2, 0, 0, 1 }, 1252 .gpiomute = 8, 1253 .pll = PLL_35, 1254 .tuner_type = TUNER_TEMIC_PAL, 1255 .tuner_addr = ADDR_UNSET, 1256 }, 1257 [BTTV_BOARD_GMV1] = { 1258 /* Adrian Cox <adrian@humboldt.co.uk */ 1259 .name = "AG Electronics GMV1", 1260 .video_inputs = 2, 1261 /* .audio_inputs= 0, */ 1262 .svhs = 1, 1263 .gpiomask = 0xF, 1264 .muxsel = MUXSEL(2, 2), 1265 .gpiomux = { }, 1266 .no_msp34xx = 1, 1267 .pll = PLL_28, 1268 .tuner_type = TUNER_ABSENT, 1269 .tuner_addr = ADDR_UNSET, 1270 }, 1271 [BTTV_BOARD_BESTBUY_EASYTV2] = { 1272 /* Miguel Angel Alvarez <maacruz@navegalia.com> 1273 new Easy TV BT878 version (model CPH061) 1274 special thanks to Informatica Mieres for providing the card */ 1275 .name = "Askey CPH061/ BESTBUY Easy TV (bt878)", 1276 .video_inputs = 3, 1277 /* .audio_inputs= 2, */ 1278 .svhs = 2, 1279 .gpiomask = 0xFF, 1280 .muxsel = MUXSEL(2, 3, 1, 0), 1281 .gpiomux = { 1, 0, 4, 4 }, 1282 .gpiomute = 9, 1283 .pll = PLL_28, 1284 .tuner_type = TUNER_PHILIPS_PAL, 1285 .tuner_addr = ADDR_UNSET, 1286 }, 1287 [BTTV_BOARD_ATI_TVWONDER] = { 1288 /* Lukas Gebauer <geby@volny.cz> */ 1289 .name = "ATI TV-Wonder", 1290 .video_inputs = 3, 1291 /* .audio_inputs= 1, */ 1292 .svhs = 2, 1293 .gpiomask = 0xf03f, 1294 .muxsel = MUXSEL(2, 3, 1, 0), 1295 .gpiomux = { 0xbffe, 0, 0xbfff, 0 }, 1296 .gpiomute = 0xbffe, 1297 .pll = PLL_28, 1298 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, 1299 .tuner_addr = ADDR_UNSET, 1300 }, 1301 1302 /* ---- card 0x40 ---------------------------------- */ 1303 [BTTV_BOARD_ATI_TVWONDERVE] = { 1304 /* Lukas Gebauer <geby@volny.cz> */ 1305 .name = "ATI TV-Wonder VE", 1306 .video_inputs = 2, 1307 /* .audio_inputs= 1, */ 1308 .svhs = NO_SVHS, 1309 .gpiomask = 1, 1310 .muxsel = MUXSEL(2, 3, 0, 1), 1311 .gpiomux = { 0, 0, 1, 0 }, 1312 .no_msp34xx = 1, 1313 .pll = PLL_28, 1314 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, 1315 .tuner_addr = ADDR_UNSET, 1316 }, 1317 [BTTV_BOARD_FLYVIDEO2000] = { 1318 /* DeeJay <deejay@westel900.net (2000S) */ 1319 .name = "Lifeview FlyVideo 2000S LR90", 1320 .video_inputs = 3, 1321 /* .audio_inputs= 3, */ 1322 .svhs = 2, 1323 .gpiomask = 0x18e0, 1324 .muxsel = MUXSEL(2, 3, 0, 1), 1325 /* Radio changed from 1e80 to 0x800 to make 1326 FlyVideo2000S in .hu happy (gm)*/ 1327 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */ 1328 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 }, 1329 .gpiomute = 0x1800, 1330 .audio_mode_gpio= fv2000s_audio, 1331 .no_msp34xx = 1, 1332 .pll = PLL_28, 1333 .tuner_type = TUNER_PHILIPS_PAL, 1334 .tuner_addr = ADDR_UNSET, 1335 }, 1336 [BTTV_BOARD_TERRATVALUER] = { 1337 .name = "Terratec TValueRadio", 1338 .video_inputs = 3, 1339 /* .audio_inputs= 1, */ 1340 .svhs = 2, 1341 .gpiomask = 0xffff00, 1342 .muxsel = MUXSEL(2, 3, 1, 1), 1343 .gpiomux = { 0x500, 0x500, 0x300, 0x900 }, 1344 .gpiomute = 0x900, 1345 .pll = PLL_28, 1346 .tuner_type = TUNER_PHILIPS_PAL, 1347 .tuner_addr = ADDR_UNSET, 1348 .has_radio = 1, 1349 }, 1350 [BTTV_BOARD_GVBCTV4PCI] = { 1351 /* TANAKA Kei <peg00625@nifty.com> */ 1352 .name = "IODATA GV-BCTV4/PCI", 1353 .video_inputs = 3, 1354 /* .audio_inputs= 1, */ 1355 .svhs = 2, 1356 .gpiomask = 0x010f00, 1357 .muxsel = MUXSEL(2, 3, 0, 0), 1358 .gpiomux = {0x10000, 0, 0x10000, 0 }, 1359 .no_msp34xx = 1, 1360 .pll = PLL_28, 1361 .tuner_type = TUNER_SHARP_2U5JF5540_NTSC, 1362 .tuner_addr = ADDR_UNSET, 1363 .audio_mode_gpio= gvbctv3pci_audio, 1364 }, 1365 1366 /* ---- card 0x44 ---------------------------------- */ 1367 [BTTV_BOARD_VOODOOTV_FM] = { 1368 .name = "3Dfx VoodooTV FM (Euro)", 1369 /* try "insmod msp3400 simple=0" if you have 1370 * sound problems with this card. */ 1371 .video_inputs = 4, 1372 /* .audio_inputs= 1, */ 1373 .svhs = NO_SVHS, 1374 .gpiomask = 0x4f8a00, 1375 /* 0x100000: 1=MSP enabled (0=disable again) 1376 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */ 1377 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff }, 1378 .gpiomute = 0x947fff, 1379 /* tvtuner, radio, external,internal, mute, stereo 1380 * tuner, Composite, SVid, Composite-on-Svid-adapter */ 1381 .muxsel = MUXSEL(2, 3, 0, 1), 1382 .tuner_type = TUNER_MT2032, 1383 .tuner_addr = ADDR_UNSET, 1384 .pll = PLL_28, 1385 .has_radio = 1, 1386 }, 1387 [BTTV_BOARD_VOODOOTV_200] = { 1388 .name = "VoodooTV 200 (USA)", 1389 /* try "insmod msp3400 simple=0" if you have 1390 * sound problems with this card. */ 1391 .video_inputs = 4, 1392 /* .audio_inputs= 1, */ 1393 .svhs = NO_SVHS, 1394 .gpiomask = 0x4f8a00, 1395 /* 0x100000: 1=MSP enabled (0=disable again) 1396 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */ 1397 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff }, 1398 .gpiomute = 0x947fff, 1399 /* tvtuner, radio, external,internal, mute, stereo 1400 * tuner, Composite, SVid, Composite-on-Svid-adapter */ 1401 .muxsel = MUXSEL(2, 3, 0, 1), 1402 .tuner_type = TUNER_MT2032, 1403 .tuner_addr = ADDR_UNSET, 1404 .pll = PLL_28, 1405 .has_radio = 1, 1406 }, 1407 [BTTV_BOARD_AIMMS] = { 1408 /* Philip Blundell <pb@nexus.co.uk> */ 1409 .name = "Active Imaging AIMMS", 1410 .video_inputs = 1, 1411 /* .audio_inputs= 0, */ 1412 .tuner_type = TUNER_ABSENT, 1413 .tuner_addr = ADDR_UNSET, 1414 .pll = PLL_28, 1415 .muxsel = MUXSEL(2), 1416 .gpiomask = 0 1417 }, 1418 [BTTV_BOARD_PV_BT878P_PLUS] = { 1419 /* Tomasz Pyra <hellfire@sedez.iq.pl> */ 1420 .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)", 1421 .video_inputs = 3, 1422 /* .audio_inputs= 4, */ 1423 .svhs = 2, 1424 .gpiomask = 15, 1425 .muxsel = MUXSEL(2, 3, 1, 1), 1426 .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */ 1427 .gpiomute = 13, 1428 .pll = PLL_28, 1429 .tuner_type = TUNER_LG_PAL_I_FM, 1430 .tuner_addr = ADDR_UNSET, 1431 .has_remote = 1, 1432 /* GPIO wiring: 1433 GPIO0: U4.A0 (hef4052bt) 1434 GPIO1: U4.A1 1435 GPIO2: U4.A1 (second hef4052bt) 1436 GPIO3: U4.nEN, U5.A0, A5.nEN 1437 GPIO8-15: vrd866b ? 1438 */ 1439 }, 1440 [BTTV_BOARD_FLYVIDEO98EZ] = { 1441 .name = "Lifeview FlyVideo 98EZ (capture only) LR51", 1442 .video_inputs = 4, 1443 /* .audio_inputs= 0, */ 1444 .svhs = 2, 1445 /* AV1, AV2, SVHS, CVid adapter on SVHS */ 1446 .muxsel = MUXSEL(2, 3, 1, 1), 1447 .pll = PLL_28, 1448 .no_msp34xx = 1, 1449 .tuner_type = TUNER_ABSENT, 1450 .tuner_addr = ADDR_UNSET, 1451 }, 1452 1453 /* ---- card 0x48 ---------------------------------- */ 1454 [BTTV_BOARD_PV_BT878P_9B] = { 1455 /* Dariusz Kowalewski <darekk@automex.pl> */ 1456 .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)", 1457 .video_inputs = 4, 1458 /* .audio_inputs= 1, */ 1459 .svhs = 2, 1460 .gpiomask = 0x3f, 1461 .muxsel = MUXSEL(2, 3, 1, 1), 1462 .gpiomux = { 0x01, 0x00, 0x03, 0x03 }, 1463 .gpiomute = 0x09, 1464 .no_msp34xx = 1, 1465 .pll = PLL_28, 1466 .tuner_type = TUNER_PHILIPS_PAL, 1467 .tuner_addr = ADDR_UNSET, 1468 .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */ 1469 .has_radio = 1, /* Note: not all cards have radio */ 1470 .has_remote = 1, 1471 /* GPIO wiring: 1472 GPIO0: A0 hef4052 1473 GPIO1: A1 hef4052 1474 GPIO3: nEN hef4052 1475 GPIO8-15: vrd866b 1476 GPIO20,22,23: R30,R29,R28 1477 */ 1478 }, 1479 [BTTV_BOARD_SENSORAY311_611] = { 1480 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */ 1481 /* you must jumper JP5 for the 311 card (PC/104+) to work */ 1482 .name = "Sensoray 311/611", 1483 .video_inputs = 5, 1484 /* .audio_inputs= 0, */ 1485 .svhs = 4, 1486 .gpiomask = 0, 1487 .muxsel = MUXSEL(2, 3, 1, 0, 0), 1488 .gpiomux = { 0 }, 1489 .tuner_type = TUNER_ABSENT, 1490 .tuner_addr = ADDR_UNSET, 1491 }, 1492 [BTTV_BOARD_RV605] = { 1493 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */ 1494 .name = "RemoteVision MX (RV605)", 1495 .video_inputs = 16, 1496 /* .audio_inputs= 0, */ 1497 .svhs = NO_SVHS, 1498 .gpiomask = 0x00, 1499 .gpiomask2 = 0x07ff, 1500 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), 1501 .no_msp34xx = 1, 1502 .tuner_type = TUNER_ABSENT, 1503 .tuner_addr = ADDR_UNSET, 1504 .muxsel_hook = rv605_muxsel, 1505 }, 1506 [BTTV_BOARD_POWERCLR_MTV878] = { 1507 .name = "Powercolor MTV878/ MTV878R/ MTV878F", 1508 .video_inputs = 3, 1509 /* .audio_inputs= 2, */ 1510 .svhs = 2, 1511 .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */ 1512 .muxsel = MUXSEL(2, 1, 1), 1513 .gpiomux = { 0, 1, 2, 2 }, 1514 .gpiomute = 4, 1515 .tuner_type = TUNER_PHILIPS_PAL, 1516 .tuner_addr = ADDR_UNSET, 1517 .pll = PLL_28, 1518 .has_radio = 1, 1519 }, 1520 1521 /* ---- card 0x4c ---------------------------------- */ 1522 [BTTV_BOARD_WINDVR] = { 1523 /* Masaki Suzuki <masaki@btree.org> */ 1524 .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)", 1525 .video_inputs = 3, 1526 /* .audio_inputs= 1, */ 1527 .svhs = 2, 1528 .gpiomask = 0x140007, 1529 .muxsel = MUXSEL(2, 3, 1, 1), 1530 .gpiomux = { 0, 1, 2, 3 }, 1531 .gpiomute = 4, 1532 .tuner_type = TUNER_PHILIPS_NTSC, 1533 .tuner_addr = ADDR_UNSET, 1534 .audio_mode_gpio= windvr_audio, 1535 }, 1536 [BTTV_BOARD_GRANDTEC_MULTI] = { 1537 .name = "GrandTec Multi Capture Card (Bt878)", 1538 .video_inputs = 4, 1539 /* .audio_inputs= 0, */ 1540 .svhs = NO_SVHS, 1541 .gpiomask = 0, 1542 .muxsel = MUXSEL(2, 3, 1, 0), 1543 .gpiomux = { 0 }, 1544 .no_msp34xx = 1, 1545 .pll = PLL_28, 1546 .tuner_type = TUNER_ABSENT, 1547 .tuner_addr = ADDR_UNSET, 1548 }, 1549 [BTTV_BOARD_KWORLD] = { 1550 .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF", 1551 .video_inputs = 4, 1552 /* .audio_inputs= 3, */ 1553 .svhs = 2, 1554 .gpiomask = 7, 1555 /* Tuner, SVid, SVHS, SVid to SVHS connector */ 1556 .muxsel = MUXSEL(2, 3, 1, 1), 1557 .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio! 1558 * This card lacks external Audio In, so we mute it on Ext. & Int. 1559 * The PCB can take a sbx1637/sbx1673, wiring unknown. 1560 * This card lacks PCI subsystem ID, sigh. 1561 * gpiomux =1: lower volume, 2+3: mute 1562 * btwincap uses 0x80000/0x80003 1563 */ 1564 .gpiomute = 4, 1565 .no_msp34xx = 1, 1566 .pll = PLL_28, 1567 .tuner_type = TUNER_PHILIPS_PAL, 1568 .tuner_addr = ADDR_UNSET, 1569 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and 1570 radio signal strength indicators work fine. */ 1571 .has_radio = 1, 1572 /* GPIO Info: 1573 GPIO0,1: HEF4052 A0,A1 1574 GPIO2: HEF4052 nENABLE 1575 GPIO3-7: n.c. 1576 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card] 1577 GPIO14,15: ?? 1578 GPIO16-21: n.c. 1579 GPIO22,23: ?? 1580 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/ 1581 }, 1582 [BTTV_BOARD_DSP_TCVIDEO] = { 1583 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */ 1584 .name = "DSP Design TCVIDEO", 1585 .video_inputs = 4, 1586 .svhs = NO_SVHS, 1587 .muxsel = MUXSEL(2, 3, 1, 0), 1588 .pll = PLL_28, 1589 .tuner_type = UNSET, 1590 .tuner_addr = ADDR_UNSET, 1591 }, 1592 1593 /* ---- card 0x50 ---------------------------------- */ 1594 [BTTV_BOARD_HAUPPAUGEPVR] = { 1595 .name = "Hauppauge WinTV PVR", 1596 .video_inputs = 4, 1597 /* .audio_inputs= 1, */ 1598 .svhs = 2, 1599 .muxsel = MUXSEL(2, 0, 1, 1), 1600 .pll = PLL_28, 1601 .tuner_type = UNSET, 1602 .tuner_addr = ADDR_UNSET, 1603 1604 .gpiomask = 7, 1605 .gpiomux = {7}, 1606 }, 1607 [BTTV_BOARD_GVBCTV5PCI] = { 1608 .name = "IODATA GV-BCTV5/PCI", 1609 .video_inputs = 3, 1610 /* .audio_inputs= 1, */ 1611 .svhs = 2, 1612 .gpiomask = 0x0f0f80, 1613 .muxsel = MUXSEL(2, 3, 1, 0), 1614 .gpiomux = {0x030000, 0x010000, 0, 0 }, 1615 .gpiomute = 0x020000, 1616 .no_msp34xx = 1, 1617 .pll = PLL_28, 1618 .tuner_type = TUNER_PHILIPS_NTSC_M, 1619 .tuner_addr = ADDR_UNSET, 1620 .audio_mode_gpio= gvbctv5pci_audio, 1621 .has_radio = 1, 1622 }, 1623 [BTTV_BOARD_OSPREY1x0] = { 1624 .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */ 1625 .video_inputs = 4, /* id-inputs-clock */ 1626 /* .audio_inputs= 0, */ 1627 .svhs = 3, 1628 .muxsel = MUXSEL(3, 2, 0, 1), 1629 .pll = PLL_28, 1630 .tuner_type = TUNER_ABSENT, 1631 .tuner_addr = ADDR_UNSET, 1632 .no_msp34xx = 1, 1633 .no_tda7432 = 1, 1634 }, 1635 [BTTV_BOARD_OSPREY1x0_848] = { 1636 .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */ 1637 .video_inputs = 3, 1638 /* .audio_inputs= 0, */ 1639 .svhs = 2, 1640 .muxsel = MUXSEL(2, 3, 1), 1641 .pll = PLL_28, 1642 .tuner_type = TUNER_ABSENT, 1643 .tuner_addr = ADDR_UNSET, 1644 .no_msp34xx = 1, 1645 .no_tda7432 = 1, 1646 }, 1647 1648 /* ---- card 0x54 ---------------------------------- */ 1649 [BTTV_BOARD_OSPREY101_848] = { 1650 .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */ 1651 .video_inputs = 2, 1652 /* .audio_inputs= 0, */ 1653 .svhs = 1, 1654 .muxsel = MUXSEL(3, 1), 1655 .pll = PLL_28, 1656 .tuner_type = TUNER_ABSENT, 1657 .tuner_addr = ADDR_UNSET, 1658 .no_msp34xx = 1, 1659 .no_tda7432 = 1, 1660 }, 1661 [BTTV_BOARD_OSPREY1x1] = { 1662 .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */ 1663 .video_inputs = 1, 1664 /* .audio_inputs= 0, */ 1665 .svhs = NO_SVHS, 1666 .muxsel = MUXSEL(0), 1667 .pll = PLL_28, 1668 .tuner_type = TUNER_ABSENT, 1669 .tuner_addr = ADDR_UNSET, 1670 .no_msp34xx = 1, 1671 .no_tda7432 = 1, 1672 }, 1673 [BTTV_BOARD_OSPREY1x1_SVID] = { 1674 .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */ 1675 .video_inputs = 2, 1676 /* .audio_inputs= 0, */ 1677 .svhs = 1, 1678 .muxsel = MUXSEL(0, 1), 1679 .pll = PLL_28, 1680 .tuner_type = TUNER_ABSENT, 1681 .tuner_addr = ADDR_UNSET, 1682 .no_msp34xx = 1, 1683 .no_tda7432 = 1, 1684 }, 1685 [BTTV_BOARD_OSPREY2xx] = { 1686 .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */ 1687 .video_inputs = 1, 1688 /* .audio_inputs= 1, */ 1689 .svhs = NO_SVHS, 1690 .muxsel = MUXSEL(0), 1691 .pll = PLL_28, 1692 .tuner_type = TUNER_ABSENT, 1693 .tuner_addr = ADDR_UNSET, 1694 .no_msp34xx = 1, 1695 .no_tda7432 = 1, 1696 }, 1697 1698 /* ---- card 0x58 ---------------------------------- */ 1699 [BTTV_BOARD_OSPREY2x0_SVID] = { 1700 .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */ 1701 .video_inputs = 2, 1702 /* .audio_inputs= 1, */ 1703 .svhs = 1, 1704 .muxsel = MUXSEL(0, 1), 1705 .pll = PLL_28, 1706 .tuner_type = TUNER_ABSENT, 1707 .tuner_addr = ADDR_UNSET, 1708 .no_msp34xx = 1, 1709 .no_tda7432 = 1, 1710 }, 1711 [BTTV_BOARD_OSPREY2x0] = { 1712 .name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */ 1713 .video_inputs = 2, 1714 /* .audio_inputs= 1, */ 1715 .svhs = 1, 1716 .muxsel = MUXSEL(2, 3), 1717 .pll = PLL_28, 1718 .tuner_type = TUNER_ABSENT, 1719 .tuner_addr = ADDR_UNSET, 1720 .no_msp34xx = 1, 1721 .no_tda7432 = 1, 1722 }, 1723 [BTTV_BOARD_OSPREY500] = { 1724 .name = "Osprey 500", /* 500 */ 1725 .video_inputs = 2, 1726 /* .audio_inputs= 1, */ 1727 .svhs = 1, 1728 .muxsel = MUXSEL(2, 3), 1729 .pll = PLL_28, 1730 .tuner_type = TUNER_ABSENT, 1731 .tuner_addr = ADDR_UNSET, 1732 .no_msp34xx = 1, 1733 .no_tda7432 = 1, 1734 }, 1735 [BTTV_BOARD_OSPREY540] = { 1736 .name = "Osprey 540", /* 540 */ 1737 .video_inputs = 4, 1738 /* .audio_inputs= 1, */ 1739 .pll = PLL_28, 1740 .tuner_type = TUNER_ABSENT, 1741 .tuner_addr = ADDR_UNSET, 1742 .no_msp34xx = 1, 1743 .no_tda7432 = 1, 1744 }, 1745 1746 /* ---- card 0x5C ---------------------------------- */ 1747 [BTTV_BOARD_OSPREY2000] = { 1748 .name = "Osprey 2000", /* 2000 */ 1749 .video_inputs = 2, 1750 /* .audio_inputs= 1, */ 1751 .svhs = 1, 1752 .muxsel = MUXSEL(2, 3), 1753 .pll = PLL_28, 1754 .tuner_type = TUNER_ABSENT, 1755 .tuner_addr = ADDR_UNSET, 1756 .no_msp34xx = 1, 1757 .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */ 1758 }, 1759 [BTTV_BOARD_IDS_EAGLE] = { 1760 /* M G Berberich <berberic@forwiss.uni-passau.de> */ 1761 .name = "IDS Eagle", 1762 .video_inputs = 4, 1763 /* .audio_inputs= 0, */ 1764 .tuner_type = TUNER_ABSENT, 1765 .tuner_addr = ADDR_UNSET, 1766 .svhs = NO_SVHS, 1767 .gpiomask = 0, 1768 .muxsel = MUXSEL(2, 2, 2, 2), 1769 .muxsel_hook = eagle_muxsel, 1770 .no_msp34xx = 1, 1771 .pll = PLL_28, 1772 }, 1773 [BTTV_BOARD_PINNACLESAT] = { 1774 .name = "Pinnacle PCTV Sat", 1775 .video_inputs = 2, 1776 /* .audio_inputs= 0, */ 1777 .svhs = 1, 1778 .tuner_type = TUNER_ABSENT, 1779 .tuner_addr = ADDR_UNSET, 1780 .no_msp34xx = 1, 1781 .no_tda7432 = 1, 1782 .muxsel = MUXSEL(3, 1), 1783 .pll = PLL_28, 1784 .no_gpioirq = 1, 1785 .has_dvb = 1, 1786 }, 1787 [BTTV_BOARD_FORMAC_PROTV] = { 1788 .name = "Formac ProTV II (bt878)", 1789 .video_inputs = 4, 1790 /* .audio_inputs= 1, */ 1791 .svhs = 3, 1792 .gpiomask = 2, 1793 /* TV, Comp1, Composite over SVID con, SVID */ 1794 .muxsel = MUXSEL(2, 3, 1, 1), 1795 .gpiomux = { 2, 2, 0, 0 }, 1796 .pll = PLL_28, 1797 .has_radio = 1, 1798 .tuner_type = TUNER_PHILIPS_PAL, 1799 .tuner_addr = ADDR_UNSET, 1800 /* sound routing: 1801 GPIO=0x00,0x01,0x03: mute (?) 1802 0x02: both TV and radio (tuner: FM1216/I) 1803 The card has onboard audio connectors labeled "cdrom" and "board", 1804 not soldered here, though unknown wiring. 1805 Card lacks: external audio in, pci subsystem id. 1806 */ 1807 }, 1808 1809 /* ---- card 0x60 ---------------------------------- */ 1810 [BTTV_BOARD_MACHTV] = { 1811 .name = "MachTV", 1812 .video_inputs = 3, 1813 /* .audio_inputs= 1, */ 1814 .svhs = NO_SVHS, 1815 .gpiomask = 7, 1816 .muxsel = MUXSEL(2, 3, 1, 1), 1817 .gpiomux = { 0, 1, 2, 3}, 1818 .gpiomute = 4, 1819 .tuner_type = TUNER_PHILIPS_PAL, 1820 .tuner_addr = ADDR_UNSET, 1821 .pll = PLL_28, 1822 }, 1823 [BTTV_BOARD_EURESYS_PICOLO] = { 1824 .name = "Euresys Picolo", 1825 .video_inputs = 3, 1826 /* .audio_inputs= 0, */ 1827 .svhs = 2, 1828 .gpiomask = 0, 1829 .no_msp34xx = 1, 1830 .no_tda7432 = 1, 1831 .muxsel = MUXSEL(2, 0, 1), 1832 .pll = PLL_28, 1833 .tuner_type = TUNER_ABSENT, 1834 .tuner_addr = ADDR_UNSET, 1835 }, 1836 [BTTV_BOARD_PV150] = { 1837 /* Luc Van Hoeylandt <luc@e-magic.be> */ 1838 .name = "ProVideo PV150", /* 0x4f */ 1839 .video_inputs = 2, 1840 /* .audio_inputs= 0, */ 1841 .svhs = NO_SVHS, 1842 .gpiomask = 0, 1843 .muxsel = MUXSEL(2, 3), 1844 .gpiomux = { 0 }, 1845 .no_msp34xx = 1, 1846 .pll = PLL_28, 1847 .tuner_type = TUNER_ABSENT, 1848 .tuner_addr = ADDR_UNSET, 1849 }, 1850 [BTTV_BOARD_AD_TVK503] = { 1851 /* Hiroshi Takekawa <sian@big.or.jp> */ 1852 /* This card lacks subsystem ID */ 1853 .name = "AD-TVK503", /* 0x63 */ 1854 .video_inputs = 4, 1855 /* .audio_inputs= 1, */ 1856 .svhs = 2, 1857 .gpiomask = 0x001e8007, 1858 .muxsel = MUXSEL(2, 3, 1, 0), 1859 /* Tuner, Radio, external, internal, off, on */ 1860 .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 }, 1861 .gpiomute = 0x0f, 1862 .no_msp34xx = 1, 1863 .pll = PLL_28, 1864 .tuner_type = TUNER_PHILIPS_NTSC, 1865 .tuner_addr = ADDR_UNSET, 1866 .audio_mode_gpio= adtvk503_audio, 1867 }, 1868 1869 /* ---- card 0x64 ---------------------------------- */ 1870 [BTTV_BOARD_HERCULES_SM_TV] = { 1871 .name = "Hercules Smart TV Stereo", 1872 .video_inputs = 4, 1873 /* .audio_inputs= 1, */ 1874 .svhs = 2, 1875 .gpiomask = 0x00, 1876 .muxsel = MUXSEL(2, 3, 1, 1), 1877 .no_msp34xx = 1, 1878 .pll = PLL_28, 1879 .tuner_type = TUNER_PHILIPS_PAL, 1880 .tuner_addr = ADDR_UNSET, 1881 /* Notes: 1882 - card lacks subsystem ID 1883 - stereo variant w/ daughter board with tda9874a @0xb0 1884 - Audio Routing: 1885 always from tda9874 independent of GPIO (?) 1886 external line in: unknown 1887 - Other chips: em78p156elp @ 0x96 (probably IR remote control) 1888 hef4053 (instead 4052) for unknown function 1889 */ 1890 }, 1891 [BTTV_BOARD_PACETV] = { 1892 .name = "Pace TV & Radio Card", 1893 .video_inputs = 4, 1894 /* .audio_inputs= 1, */ 1895 .svhs = 2, 1896 /* Tuner, CVid, SVid, CVid over SVid connector */ 1897 .muxsel = MUXSEL(2, 3, 1, 1), 1898 .gpiomask = 0, 1899 .no_tda7432 = 1, 1900 .tuner_type = TUNER_PHILIPS_PAL_I, 1901 .tuner_addr = ADDR_UNSET, 1902 .has_radio = 1, 1903 .pll = PLL_28, 1904 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id 1905 only internal line out: (4pin header) RGGL 1906 Radio must be decoded by msp3410d (not routed through)*/ 1907 /* 1908 .digital_mode = DIGITAL_MODE_CAMERA, todo! 1909 */ 1910 }, 1911 [BTTV_BOARD_IVC200] = { 1912 /* Chris Willing <chris@vislab.usyd.edu.au> */ 1913 .name = "IVC-200", 1914 .video_inputs = 1, 1915 /* .audio_inputs= 0, */ 1916 .tuner_type = TUNER_ABSENT, 1917 .tuner_addr = ADDR_UNSET, 1918 .svhs = NO_SVHS, 1919 .gpiomask = 0xdf, 1920 .muxsel = MUXSEL(2), 1921 .pll = PLL_28, 1922 }, 1923 [BTTV_BOARD_IVCE8784] = { 1924 .name = "IVCE-8784", 1925 .video_inputs = 1, 1926 /* .audio_inputs= 0, */ 1927 .tuner_type = TUNER_ABSENT, 1928 .tuner_addr = ADDR_UNSET, 1929 .svhs = NO_SVHS, 1930 .gpiomask = 0xdf, 1931 .muxsel = MUXSEL(2), 1932 .pll = PLL_28, 1933 }, 1934 [BTTV_BOARD_XGUARD] = { 1935 .name = "Grand X-Guard / Trust 814PCI", 1936 .video_inputs = 16, 1937 /* .audio_inputs= 0, */ 1938 .svhs = NO_SVHS, 1939 .tuner_type = TUNER_ABSENT, 1940 .tuner_addr = ADDR_UNSET, 1941 .gpiomask2 = 0xff, 1942 .muxsel = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0), 1943 .muxsel_hook = xguard_muxsel, 1944 .no_msp34xx = 1, 1945 .no_tda7432 = 1, 1946 .pll = PLL_28, 1947 }, 1948 1949 /* ---- card 0x68 ---------------------------------- */ 1950 [BTTV_BOARD_NEBULA_DIGITV] = { 1951 .name = "Nebula Electronics DigiTV", 1952 .video_inputs = 1, 1953 .svhs = NO_SVHS, 1954 .muxsel = MUXSEL(2, 3, 1, 0), 1955 .no_msp34xx = 1, 1956 .no_tda7432 = 1, 1957 .pll = PLL_28, 1958 .tuner_type = TUNER_ABSENT, 1959 .tuner_addr = ADDR_UNSET, 1960 .has_dvb = 1, 1961 .has_remote = 1, 1962 .gpiomask = 0x1b, 1963 .no_gpioirq = 1, 1964 }, 1965 [BTTV_BOARD_PV143] = { 1966 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */ 1967 .name = "ProVideo PV143", 1968 .video_inputs = 4, 1969 /* .audio_inputs= 0, */ 1970 .svhs = NO_SVHS, 1971 .gpiomask = 0, 1972 .muxsel = MUXSEL(2, 3, 1, 0), 1973 .gpiomux = { 0 }, 1974 .no_msp34xx = 1, 1975 .pll = PLL_28, 1976 .tuner_type = TUNER_ABSENT, 1977 .tuner_addr = ADDR_UNSET, 1978 }, 1979 [BTTV_BOARD_VD009X1_VD011_MINIDIN] = { 1980 /* M.Klahr@phytec.de */ 1981 .name = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)", 1982 .video_inputs = 4, 1983 /* .audio_inputs= 0, */ 1984 .svhs = 3, 1985 .gpiomask = 0x00, 1986 .muxsel = MUXSEL(2, 3, 1, 0), 1987 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 1988 .pll = PLL_28, 1989 .tuner_type = TUNER_ABSENT, 1990 .tuner_addr = ADDR_UNSET, 1991 }, 1992 [BTTV_BOARD_VD009X1_VD011_COMBI] = { 1993 .name = "PHYTEC VD-009-X1 VD-011 Combi (bt878)", 1994 .video_inputs = 4, 1995 /* .audio_inputs= 0, */ 1996 .svhs = 3, 1997 .gpiomask = 0x00, 1998 .muxsel = MUXSEL(2, 3, 1, 1), 1999 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2000 .pll = PLL_28, 2001 .tuner_type = TUNER_ABSENT, 2002 .tuner_addr = ADDR_UNSET, 2003 }, 2004 2005 /* ---- card 0x6c ---------------------------------- */ 2006 [BTTV_BOARD_VD009_MINIDIN] = { 2007 .name = "PHYTEC VD-009 MiniDIN (bt878)", 2008 .video_inputs = 10, 2009 /* .audio_inputs= 0, */ 2010 .svhs = 9, 2011 .gpiomask = 0x00, 2012 .gpiomask2 = 0x03, /* used for external video mux */ 2013 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0), 2014 .muxsel_hook = phytec_muxsel, 2015 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2016 .pll = PLL_28, 2017 .tuner_type = TUNER_ABSENT, 2018 .tuner_addr = ADDR_UNSET, 2019 }, 2020 [BTTV_BOARD_VD009_COMBI] = { 2021 .name = "PHYTEC VD-009 Combi (bt878)", 2022 .video_inputs = 10, 2023 /* .audio_inputs= 0, */ 2024 .svhs = 9, 2025 .gpiomask = 0x00, 2026 .gpiomask2 = 0x03, /* used for external video mux */ 2027 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), 2028 .muxsel_hook = phytec_muxsel, 2029 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2030 .pll = PLL_28, 2031 .tuner_type = TUNER_ABSENT, 2032 .tuner_addr = ADDR_UNSET, 2033 }, 2034 [BTTV_BOARD_IVC100] = { 2035 .name = "IVC-100", 2036 .video_inputs = 4, 2037 /* .audio_inputs= 0, */ 2038 .tuner_type = TUNER_ABSENT, 2039 .tuner_addr = ADDR_UNSET, 2040 .svhs = NO_SVHS, 2041 .gpiomask = 0xdf, 2042 .muxsel = MUXSEL(2, 3, 1, 0), 2043 .pll = PLL_28, 2044 }, 2045 [BTTV_BOARD_IVC120] = { 2046 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */ 2047 .name = "IVC-120G", 2048 .video_inputs = 16, 2049 /* .audio_inputs= 0, */ 2050 .tuner_type = TUNER_ABSENT, 2051 .tuner_addr = ADDR_UNSET, 2052 .svhs = NO_SVHS, /* card has no svhs */ 2053 .no_msp34xx = 1, 2054 .no_tda7432 = 1, 2055 .gpiomask = 0x00, 2056 .muxsel = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0), 2057 .muxsel_hook = ivc120_muxsel, 2058 .pll = PLL_28, 2059 }, 2060 2061 /* ---- card 0x70 ---------------------------------- */ 2062 [BTTV_BOARD_PC_HDTV] = { 2063 .name = "pcHDTV HD-2000 TV", 2064 .video_inputs = 4, 2065 /* .audio_inputs= 1, */ 2066 .svhs = 2, 2067 .muxsel = MUXSEL(2, 3, 1, 0), 2068 .tuner_type = TUNER_PHILIPS_FCV1236D, 2069 .tuner_addr = ADDR_UNSET, 2070 .has_dvb = 1, 2071 }, 2072 [BTTV_BOARD_TWINHAN_DST] = { 2073 .name = "Twinhan DST + clones", 2074 .no_msp34xx = 1, 2075 .no_tda7432 = 1, 2076 .tuner_type = TUNER_ABSENT, 2077 .tuner_addr = ADDR_UNSET, 2078 .no_video = 1, 2079 .has_dvb = 1, 2080 }, 2081 [BTTV_BOARD_WINFASTVC100] = { 2082 .name = "Winfast VC100", 2083 .video_inputs = 3, 2084 /* .audio_inputs= 0, */ 2085 .svhs = 1, 2086 /* Vid In, SVid In, Vid over SVid in connector */ 2087 .muxsel = MUXSEL(3, 1, 1, 3), 2088 .no_msp34xx = 1, 2089 .no_tda7432 = 1, 2090 .tuner_type = TUNER_ABSENT, 2091 .tuner_addr = ADDR_UNSET, 2092 .pll = PLL_28, 2093 }, 2094 [BTTV_BOARD_TEV560] = { 2095 .name = "Teppro TEV-560/InterVision IV-560", 2096 .video_inputs = 3, 2097 /* .audio_inputs= 1, */ 2098 .svhs = 2, 2099 .gpiomask = 3, 2100 .muxsel = MUXSEL(2, 3, 1, 1), 2101 .gpiomux = { 1, 1, 1, 1 }, 2102 .tuner_type = TUNER_PHILIPS_PAL, 2103 .tuner_addr = ADDR_UNSET, 2104 .pll = PLL_35, 2105 }, 2106 2107 /* ---- card 0x74 ---------------------------------- */ 2108 [BTTV_BOARD_SIMUS_GVC1100] = { 2109 .name = "SIMUS GVC1100", 2110 .video_inputs = 4, 2111 /* .audio_inputs= 0, */ 2112 .svhs = NO_SVHS, 2113 .tuner_type = TUNER_ABSENT, 2114 .tuner_addr = ADDR_UNSET, 2115 .pll = PLL_28, 2116 .muxsel = MUXSEL(2, 2, 2, 2), 2117 .gpiomask = 0x3F, 2118 .muxsel_hook = gvc1100_muxsel, 2119 }, 2120 [BTTV_BOARD_NGSTV_PLUS] = { 2121 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */ 2122 .name = "NGS NGSTV+", 2123 .video_inputs = 3, 2124 .svhs = 2, 2125 .gpiomask = 0x008007, 2126 .muxsel = MUXSEL(2, 3, 0, 0), 2127 .gpiomux = { 0, 0, 0, 0 }, 2128 .gpiomute = 0x000003, 2129 .pll = PLL_28, 2130 .tuner_type = TUNER_PHILIPS_PAL, 2131 .tuner_addr = ADDR_UNSET, 2132 .has_remote = 1, 2133 }, 2134 [BTTV_BOARD_LMLBT4] = { 2135 /* http://linuxmedialabs.com */ 2136 .name = "LMLBT4", 2137 .video_inputs = 4, /* IN1,IN2,IN3,IN4 */ 2138 /* .audio_inputs= 0, */ 2139 .svhs = NO_SVHS, 2140 .muxsel = MUXSEL(2, 3, 1, 0), 2141 .no_msp34xx = 1, 2142 .no_tda7432 = 1, 2143 .tuner_type = TUNER_ABSENT, 2144 .tuner_addr = ADDR_UNSET, 2145 }, 2146 [BTTV_BOARD_TEKRAM_M205] = { 2147 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */ 2148 .name = "Tekram M205 PRO", 2149 .video_inputs = 3, 2150 /* .audio_inputs= 1, */ 2151 .tuner_type = TUNER_PHILIPS_PAL, 2152 .tuner_addr = ADDR_UNSET, 2153 .svhs = 2, 2154 .gpiomask = 0x68, 2155 .muxsel = MUXSEL(2, 3, 1), 2156 .gpiomux = { 0x68, 0x68, 0x61, 0x61 }, 2157 .pll = PLL_28, 2158 }, 2159 2160 /* ---- card 0x78 ---------------------------------- */ 2161 [BTTV_BOARD_CONTVFMI] = { 2162 /* Javier Cendan Ares <jcendan@lycos.es> */ 2163 /* bt878 TV + FM without subsystem ID */ 2164 .name = "Conceptronic CONTVFMi", 2165 .video_inputs = 3, 2166 /* .audio_inputs= 1, */ 2167 .svhs = 2, 2168 .gpiomask = 0x008007, 2169 .muxsel = MUXSEL(2, 3, 1, 1), 2170 .gpiomux = { 0, 1, 2, 2 }, 2171 .gpiomute = 3, 2172 .pll = PLL_28, 2173 .tuner_type = TUNER_PHILIPS_PAL, 2174 .tuner_addr = ADDR_UNSET, 2175 .has_remote = 1, 2176 .has_radio = 1, 2177 }, 2178 [BTTV_BOARD_PICOLO_TETRA_CHIP] = { 2179 /*Eric DEBIEF <debief@telemsa.com>*/ 2180 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/ 2181 /*adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration*/ 2182 /*structure and #define BTTV_BOARD_PICOLO_TETRA_CHIP 0x79 in bttv.h*/ 2183 .name = "Euresys Picolo Tetra", 2184 .video_inputs = 4, 2185 /* .audio_inputs= 0, */ 2186 .svhs = NO_SVHS, 2187 .gpiomask = 0, 2188 .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/ 2189 .no_msp34xx = 1, 2190 .no_tda7432 = 1, 2191 /*878A input is always MUX0, see above.*/ 2192 .muxsel = MUXSEL(2, 2, 2, 2), 2193 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2194 .pll = PLL_28, 2195 .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/ 2196 .tuner_type = TUNER_ABSENT, 2197 .tuner_addr = ADDR_UNSET, 2198 }, 2199 [BTTV_BOARD_SPIRIT_TV] = { 2200 /* Spirit TV Tuner from http://spiritmodems.com.au */ 2201 /* Stafford Goodsell <surge@goliath.homeunix.org> */ 2202 .name = "Spirit TV Tuner", 2203 .video_inputs = 3, 2204 /* .audio_inputs= 1, */ 2205 .svhs = 2, 2206 .gpiomask = 0x0000000f, 2207 .muxsel = MUXSEL(2, 1, 1), 2208 .gpiomux = { 0x02, 0x00, 0x00, 0x00 }, 2209 .tuner_type = TUNER_TEMIC_PAL, 2210 .tuner_addr = ADDR_UNSET, 2211 .no_msp34xx = 1, 2212 }, 2213 [BTTV_BOARD_AVDVBT_771] = { 2214 /* Wolfram Joost <wojo@frokaschwei.de> */ 2215 .name = "AVerMedia AVerTV DVB-T 771", 2216 .video_inputs = 2, 2217 .svhs = 1, 2218 .tuner_type = TUNER_ABSENT, 2219 .tuner_addr = ADDR_UNSET, 2220 .muxsel = MUXSEL(3, 3), 2221 .no_msp34xx = 1, 2222 .no_tda7432 = 1, 2223 .pll = PLL_28, 2224 .has_dvb = 1, 2225 .no_gpioirq = 1, 2226 .has_remote = 1, 2227 }, 2228 /* ---- card 0x7c ---------------------------------- */ 2229 [BTTV_BOARD_AVDVBT_761] = { 2230 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */ 2231 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */ 2232 .name = "AverMedia AverTV DVB-T 761", 2233 .video_inputs = 2, 2234 .svhs = 1, 2235 .muxsel = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */ 2236 .no_msp34xx = 1, 2237 .no_tda7432 = 1, 2238 .pll = PLL_28, 2239 .tuner_type = TUNER_ABSENT, 2240 .tuner_addr = ADDR_UNSET, 2241 .has_dvb = 1, 2242 .no_gpioirq = 1, 2243 .has_remote = 1, 2244 }, 2245 [BTTV_BOARD_MATRIX_VISIONSQ] = { 2246 /* andre.schwarz@matrix-vision.de */ 2247 .name = "MATRIX Vision Sigma-SQ", 2248 .video_inputs = 16, 2249 /* .audio_inputs= 0, */ 2250 .svhs = NO_SVHS, 2251 .gpiomask = 0x0, 2252 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3), 2253 .muxsel_hook = sigmaSQ_muxsel, 2254 .gpiomux = { 0 }, 2255 .no_msp34xx = 1, 2256 .pll = PLL_28, 2257 .tuner_type = TUNER_ABSENT, 2258 .tuner_addr = ADDR_UNSET, 2259 }, 2260 [BTTV_BOARD_MATRIX_VISIONSLC] = { 2261 /* andre.schwarz@matrix-vision.de */ 2262 .name = "MATRIX Vision Sigma-SLC", 2263 .video_inputs = 4, 2264 /* .audio_inputs= 0, */ 2265 .svhs = NO_SVHS, 2266 .gpiomask = 0x0, 2267 .muxsel = MUXSEL(2, 2, 2, 2), 2268 .muxsel_hook = sigmaSLC_muxsel, 2269 .gpiomux = { 0 }, 2270 .no_msp34xx = 1, 2271 .pll = PLL_28, 2272 .tuner_type = TUNER_ABSENT, 2273 .tuner_addr = ADDR_UNSET, 2274 }, 2275 /* BTTV_BOARD_APAC_VIEWCOMP */ 2276 [BTTV_BOARD_APAC_VIEWCOMP] = { 2277 /* Attila Kondoros <attila.kondoros@chello.hu> */ 2278 /* bt878 TV + FM 0x00000000 subsystem ID */ 2279 .name = "APAC Viewcomp 878(AMAX)", 2280 .video_inputs = 2, 2281 /* .audio_inputs= 1, */ 2282 .svhs = NO_SVHS, 2283 .gpiomask = 0xFF, 2284 .muxsel = MUXSEL(2, 3, 1, 1), 2285 .gpiomux = { 2, 0, 0, 0 }, 2286 .gpiomute = 10, 2287 .pll = PLL_28, 2288 .tuner_type = TUNER_PHILIPS_PAL, 2289 .tuner_addr = ADDR_UNSET, 2290 .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */ 2291 .has_radio = 1, /* not every card has radio */ 2292 }, 2293 2294 /* ---- card 0x80 ---------------------------------- */ 2295 [BTTV_BOARD_DVICO_DVBT_LITE] = { 2296 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */ 2297 .name = "DViCO FusionHDTV DVB-T Lite", 2298 .no_msp34xx = 1, 2299 .no_tda7432 = 1, 2300 .pll = PLL_28, 2301 .no_video = 1, 2302 .has_dvb = 1, 2303 .tuner_type = TUNER_ABSENT, 2304 .tuner_addr = ADDR_UNSET, 2305 }, 2306 [BTTV_BOARD_VGEAR_MYVCD] = { 2307 /* Steven <photon38@pchome.com.tw> */ 2308 .name = "V-Gear MyVCD", 2309 .video_inputs = 3, 2310 /* .audio_inputs= 1, */ 2311 .svhs = 2, 2312 .gpiomask = 0x3f, 2313 .muxsel = MUXSEL(2, 3, 1, 0), 2314 .gpiomux = {0x31, 0x31, 0x31, 0x31 }, 2315 .gpiomute = 0x31, 2316 .no_msp34xx = 1, 2317 .pll = PLL_28, 2318 .tuner_type = TUNER_PHILIPS_NTSC_M, 2319 .tuner_addr = ADDR_UNSET, 2320 .has_radio = 0, 2321 }, 2322 [BTTV_BOARD_SUPER_TV] = { 2323 /* Rick C <cryptdragoon@gmail.com> */ 2324 .name = "Super TV Tuner", 2325 .video_inputs = 4, 2326 /* .audio_inputs= 1, */ 2327 .svhs = 2, 2328 .muxsel = MUXSEL(2, 3, 1, 0), 2329 .tuner_type = TUNER_PHILIPS_NTSC, 2330 .tuner_addr = ADDR_UNSET, 2331 .gpiomask = 0x008007, 2332 .gpiomux = { 0, 0x000001,0,0 }, 2333 .has_radio = 1, 2334 }, 2335 [BTTV_BOARD_TIBET_CS16] = { 2336 /* Chris Fanning <video4linux@haydon.net> */ 2337 .name = "Tibet Systems 'Progress DVR' CS16", 2338 .video_inputs = 16, 2339 /* .audio_inputs= 0, */ 2340 .svhs = NO_SVHS, 2341 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), 2342 .pll = PLL_28, 2343 .no_msp34xx = 1, 2344 .no_tda7432 = 1, 2345 .tuner_type = TUNER_ABSENT, 2346 .tuner_addr = ADDR_UNSET, 2347 .muxsel_hook = tibetCS16_muxsel, 2348 }, 2349 [BTTV_BOARD_KODICOM_4400R] = { 2350 /* Bill Brack <wbrack@mmm.com.hk> */ 2351 /* 2352 * Note that, because of the card's wiring, the "master" 2353 * BT878A chip (i.e. the one which controls the analog switch 2354 * and must use this card type) is the 2nd one detected. The 2355 * other 3 chips should use card type 0x85, whose description 2356 * follows this one. There is a EEPROM on the card (which is 2357 * connected to the I2C of one of those other chips), but is 2358 * not currently handled. There is also a facility for a 2359 * "monitor", which is also not currently implemented. 2360 */ 2361 .name = "Kodicom 4400R (master)", 2362 .video_inputs = 16, 2363 /* .audio_inputs= 0, */ 2364 .tuner_type = TUNER_ABSENT, 2365 .tuner_addr = ADDR_UNSET, 2366 .svhs = NO_SVHS, 2367 /* GPIO bits 0-9 used for analog switch: 2368 * 00 - 03: camera selector 2369 * 04 - 06: channel (controller) selector 2370 * 07: data (1->on, 0->off) 2371 * 08: strobe 2372 * 09: reset 2373 * bit 16 is input from sync separator for the channel 2374 */ 2375 .gpiomask = 0x0003ff, 2376 .no_gpioirq = 1, 2377 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), 2378 .pll = PLL_28, 2379 .no_msp34xx = 1, 2380 .no_tda7432 = 1, 2381 .muxsel_hook = kodicom4400r_muxsel, 2382 }, 2383 [BTTV_BOARD_KODICOM_4400R_SL] = { 2384 /* Bill Brack <wbrack@mmm.com.hk> */ 2385 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the 2386 * one which controls the analog switch, and must use the card type) 2387 * is the 2nd one detected. The other 3 chips should use this card 2388 * type 2389 */ 2390 .name = "Kodicom 4400R (slave)", 2391 .video_inputs = 16, 2392 /* .audio_inputs= 0, */ 2393 .tuner_type = TUNER_ABSENT, 2394 .tuner_addr = ADDR_UNSET, 2395 .svhs = NO_SVHS, 2396 .gpiomask = 0x010000, 2397 .no_gpioirq = 1, 2398 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), 2399 .pll = PLL_28, 2400 .no_msp34xx = 1, 2401 .no_tda7432 = 1, 2402 .muxsel_hook = kodicom4400r_muxsel, 2403 }, 2404 /* ---- card 0x86---------------------------------- */ 2405 [BTTV_BOARD_ADLINK_RTV24] = { 2406 /* Michael Henson <mhenson@clarityvi.com> */ 2407 /* Adlink RTV24 with special unlock codes */ 2408 .name = "Adlink RTV24", 2409 .video_inputs = 4, 2410 /* .audio_inputs= 1, */ 2411 .svhs = 2, 2412 .muxsel = MUXSEL(2, 3, 1, 0), 2413 .tuner_type = UNSET, 2414 .tuner_addr = ADDR_UNSET, 2415 .pll = PLL_28, 2416 }, 2417 /* ---- card 0x87---------------------------------- */ 2418 [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = { 2419 /* Michael Krufky <mkrufky@linuxtv.org> */ 2420 .name = "DViCO FusionHDTV 5 Lite", 2421 .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */ 2422 .tuner_addr = ADDR_UNSET, 2423 .video_inputs = 3, 2424 /* .audio_inputs= 1, */ 2425 .svhs = 2, 2426 .muxsel = MUXSEL(2, 3, 1), 2427 .gpiomask = 0x00e00007, 2428 .gpiomux = { 0x00400005, 0, 0x00000001, 0 }, 2429 .gpiomute = 0x00c00007, 2430 .no_msp34xx = 1, 2431 .no_tda7432 = 1, 2432 .has_dvb = 1, 2433 }, 2434 /* ---- card 0x88---------------------------------- */ 2435 [BTTV_BOARD_ACORP_Y878F] = { 2436 /* Mauro Carvalho Chehab <mchehab@kernel.org> */ 2437 .name = "Acorp Y878F", 2438 .video_inputs = 3, 2439 /* .audio_inputs= 1, */ 2440 .svhs = 2, 2441 .gpiomask = 0x01fe00, 2442 .muxsel = MUXSEL(2, 3, 1, 1), 2443 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, 2444 .gpiomute = 0x002000, 2445 .pll = PLL_28, 2446 .tuner_type = TUNER_YMEC_TVF66T5_B_DFF, 2447 .tuner_addr = 0xc1 >>1, 2448 .has_radio = 1, 2449 }, 2450 /* ---- card 0x89 ---------------------------------- */ 2451 [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = { 2452 .name = "Conceptronic CTVFMi v2", 2453 .video_inputs = 3, 2454 /* .audio_inputs= 1, */ 2455 .svhs = 2, 2456 .gpiomask = 0x001c0007, 2457 .muxsel = MUXSEL(2, 3, 1, 1), 2458 .gpiomux = { 0, 1, 2, 2 }, 2459 .gpiomute = 3, 2460 .pll = PLL_28, 2461 .tuner_type = TUNER_TENA_9533_DI, 2462 .tuner_addr = ADDR_UNSET, 2463 .has_remote = 1, 2464 .has_radio = 1, 2465 }, 2466 /* ---- card 0x8a ---------------------------------- */ 2467 [BTTV_BOARD_PV_BT878P_2E] = { 2468 .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)", 2469 .video_inputs = 5, 2470 /* .audio_inputs= 1, */ 2471 .svhs = 3, 2472 .has_dig_in = 1, 2473 .gpiomask = 0x01fe00, 2474 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */ 2475 /* .digital_mode= DIGITAL_MODE_CAMERA, */ 2476 .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 }, 2477 .gpiomute = 0x12400, 2478 .no_msp34xx = 1, 2479 .pll = PLL_28, 2480 .tuner_type = TUNER_LG_PAL_FM, 2481 .tuner_addr = ADDR_UNSET, 2482 .has_remote = 1, 2483 }, 2484 /* ---- card 0x8b ---------------------------------- */ 2485 [BTTV_BOARD_PV_M4900] = { 2486 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */ 2487 .name = "Prolink PixelView PlayTV MPEG2 PV-M4900", 2488 .video_inputs = 3, 2489 /* .audio_inputs= 1, */ 2490 .svhs = 2, 2491 .gpiomask = 0x3f, 2492 .muxsel = MUXSEL(2, 3, 1, 1), 2493 .gpiomux = { 0x21, 0x20, 0x24, 0x2c }, 2494 .gpiomute = 0x29, 2495 .no_msp34xx = 1, 2496 .pll = PLL_28, 2497 .tuner_type = TUNER_YMEC_TVF_5533MF, 2498 .tuner_addr = ADDR_UNSET, 2499 .has_radio = 1, 2500 .has_remote = 1, 2501 }, 2502 /* ---- card 0x8c ---------------------------------- */ 2503 /* Has four Bt878 chips behind a PCI bridge, each chip has: 2504 one external BNC composite input (mux 2) 2505 three internal composite inputs (unknown muxes) 2506 an 18-bit stereo A/D (CS5331A), which has: 2507 one external stereo unbalanced (RCA) audio connection 2508 one (or 3?) internal stereo balanced (XLR) audio connection 2509 input is selected via gpio to a 14052B mux 2510 (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300) 2511 gain is controlled via an X9221A chip on the I2C bus @0x28 2512 sample rate is controlled via gpio to an MK1413S 2513 (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3) 2514 There is neither a tuner nor an svideo input. */ 2515 [BTTV_BOARD_OSPREY440] = { 2516 .name = "Osprey 440", 2517 .video_inputs = 4, 2518 /* .audio_inputs= 2, */ 2519 .svhs = NO_SVHS, 2520 .muxsel = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */ 2521 .gpiomask = 0x303, 2522 .gpiomute = 0x000, /* int + 32kHz */ 2523 .gpiomux = { 0, 0, 0x000, 0x100}, 2524 .pll = PLL_28, 2525 .tuner_type = TUNER_ABSENT, 2526 .tuner_addr = ADDR_UNSET, 2527 .no_msp34xx = 1, 2528 .no_tda7432 = 1, 2529 }, 2530 /* ---- card 0x8d ---------------------------------- */ 2531 [BTTV_BOARD_ASOUND_SKYEYE] = { 2532 .name = "Asound Skyeye PCTV", 2533 .video_inputs = 3, 2534 /* .audio_inputs= 1, */ 2535 .svhs = 2, 2536 .gpiomask = 15, 2537 .muxsel = MUXSEL(2, 3, 1, 1), 2538 .gpiomux = { 2, 0, 0, 0 }, 2539 .gpiomute = 1, 2540 .pll = PLL_28, 2541 .tuner_type = TUNER_PHILIPS_NTSC, 2542 .tuner_addr = ADDR_UNSET, 2543 }, 2544 /* ---- card 0x8e ---------------------------------- */ 2545 [BTTV_BOARD_SABRENT_TVFM] = { 2546 .name = "Sabrent TV-FM (bttv version)", 2547 .video_inputs = 3, 2548 /* .audio_inputs= 1, */ 2549 .svhs = 2, 2550 .gpiomask = 0x108007, 2551 .muxsel = MUXSEL(2, 3, 1, 1), 2552 .gpiomux = { 100000, 100002, 100002, 100000 }, 2553 .no_msp34xx = 1, 2554 .no_tda7432 = 1, 2555 .pll = PLL_28, 2556 .tuner_type = TUNER_TNF_5335MF, 2557 .tuner_addr = ADDR_UNSET, 2558 .has_radio = 1, 2559 }, 2560 /* ---- card 0x8f ---------------------------------- */ 2561 [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = { 2562 .name = "Hauppauge ImpactVCB (bt878)", 2563 .video_inputs = 4, 2564 /* .audio_inputs= 0, */ 2565 .svhs = NO_SVHS, 2566 .gpiomask = 0x0f, /* old: 7 */ 2567 .muxsel = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */ 2568 .no_msp34xx = 1, 2569 .no_tda7432 = 1, 2570 .tuner_type = TUNER_ABSENT, 2571 .tuner_addr = ADDR_UNSET, 2572 }, 2573 [BTTV_BOARD_MACHTV_MAGICTV] = { 2574 /* Julian Calaby <julian.calaby@gmail.com> 2575 * Slightly different from original MachTV definition (0x60) 2576 2577 * FIXME: RegSpy says gpiomask should be "0x001c800f", but it 2578 * stuffs up remote chip. Bug is a pin on the jaecs is not set 2579 * properly (methinks) causing no keyup bits being set */ 2580 2581 .name = "MagicTV", /* rebranded MachTV */ 2582 .video_inputs = 3, 2583 /* .audio_inputs= 1, */ 2584 .svhs = 2, 2585 .gpiomask = 7, 2586 .muxsel = MUXSEL(2, 3, 1, 1), 2587 .gpiomux = { 0, 1, 2, 3 }, 2588 .gpiomute = 4, 2589 .tuner_type = TUNER_TEMIC_4009FR5_PAL, 2590 .tuner_addr = ADDR_UNSET, 2591 .pll = PLL_28, 2592 .has_radio = 1, 2593 .has_remote = 1, 2594 }, 2595 [BTTV_BOARD_SSAI_SECURITY] = { 2596 .name = "SSAI Security Video Interface", 2597 .video_inputs = 4, 2598 /* .audio_inputs= 0, */ 2599 .svhs = NO_SVHS, 2600 .muxsel = MUXSEL(0, 1, 2, 3), 2601 .tuner_type = TUNER_ABSENT, 2602 .tuner_addr = ADDR_UNSET, 2603 }, 2604 [BTTV_BOARD_SSAI_ULTRASOUND] = { 2605 .name = "SSAI Ultrasound Video Interface", 2606 .video_inputs = 2, 2607 /* .audio_inputs= 0, */ 2608 .svhs = 1, 2609 .muxsel = MUXSEL(2, 0, 1, 3), 2610 .tuner_type = TUNER_ABSENT, 2611 .tuner_addr = ADDR_UNSET, 2612 }, 2613 /* ---- card 0x94---------------------------------- */ 2614 [BTTV_BOARD_DVICO_FUSIONHDTV_2] = { 2615 .name = "DViCO FusionHDTV 2", 2616 .tuner_type = TUNER_PHILIPS_FCV1236D, 2617 .tuner_addr = ADDR_UNSET, 2618 .video_inputs = 3, 2619 /* .audio_inputs= 1, */ 2620 .svhs = 2, 2621 .muxsel = MUXSEL(2, 3, 1), 2622 .gpiomask = 0x00e00007, 2623 .gpiomux = { 0x00400005, 0, 0x00000001, 0 }, 2624 .gpiomute = 0x00c00007, 2625 .no_msp34xx = 1, 2626 .no_tda7432 = 1, 2627 }, 2628 /* ---- card 0x95---------------------------------- */ 2629 [BTTV_BOARD_TYPHOON_TVTUNERPCI] = { 2630 .name = "Typhoon TV-Tuner PCI (50684)", 2631 .video_inputs = 3, 2632 /* .audio_inputs= 1, */ 2633 .svhs = 2, 2634 .gpiomask = 0x3014f, 2635 .muxsel = MUXSEL(2, 3, 1, 1), 2636 .gpiomux = { 0x20001,0x10001, 0, 0 }, 2637 .gpiomute = 10, 2638 .pll = PLL_28, 2639 .tuner_type = TUNER_PHILIPS_PAL_I, 2640 .tuner_addr = ADDR_UNSET, 2641 }, 2642 [BTTV_BOARD_GEOVISION_GV600] = { 2643 /* emhn@usb.ve */ 2644 .name = "Geovision GV-600", 2645 .video_inputs = 16, 2646 /* .audio_inputs= 0, */ 2647 .svhs = NO_SVHS, 2648 .gpiomask = 0x0, 2649 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), 2650 .muxsel_hook = geovision_muxsel, 2651 .gpiomux = { 0 }, 2652 .no_msp34xx = 1, 2653 .pll = PLL_28, 2654 .tuner_type = TUNER_ABSENT, 2655 .tuner_addr = ADDR_UNSET, 2656 }, 2657 [BTTV_BOARD_KOZUMI_KTV_01C] = { 2658 /* Mauro Lacy <mauro@lacy.com.ar> 2659 * Based on MagicTV and Conceptronic CONTVFMi */ 2660 2661 .name = "Kozumi KTV-01C", 2662 .video_inputs = 3, 2663 /* .audio_inputs= 1, */ 2664 .svhs = 2, 2665 .gpiomask = 0x008007, 2666 .muxsel = MUXSEL(2, 3, 1, 1), 2667 .gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */ 2668 .gpiomute = 3, /* CONTVFMi */ 2669 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */ 2670 .tuner_addr = ADDR_UNSET, 2671 .pll = PLL_28, 2672 .has_radio = 1, 2673 .has_remote = 1, 2674 }, 2675 [BTTV_BOARD_ENLTV_FM_2] = { 2676 /* Encore TV Tuner Pro ENL TV-FM-2 2677 Mauro Carvalho Chehab <mchehab@kernel.org> */ 2678 .name = "Encore ENL TV-FM-2", 2679 .video_inputs = 3, 2680 /* .audio_inputs= 1, */ 2681 .svhs = 2, 2682 /* bit 6 -> IR disabled 2683 bit 18/17 = 00 -> mute 2684 01 -> enable external audio input 2685 10 -> internal audio input (mono?) 2686 11 -> internal audio input 2687 */ 2688 .gpiomask = 0x060040, 2689 .muxsel = MUXSEL(2, 3, 3), 2690 .gpiomux = { 0x60000, 0x60000, 0x20000, 0x20000 }, 2691 .gpiomute = 0, 2692 .tuner_type = TUNER_TCL_MF02GIP_5N, 2693 .tuner_addr = ADDR_UNSET, 2694 .pll = PLL_28, 2695 .has_radio = 1, 2696 .has_remote = 1, 2697 }, 2698 [BTTV_BOARD_VD012] = { 2699 /* D.Heer@Phytec.de */ 2700 .name = "PHYTEC VD-012 (bt878)", 2701 .video_inputs = 4, 2702 /* .audio_inputs= 0, */ 2703 .svhs = NO_SVHS, 2704 .gpiomask = 0x00, 2705 .muxsel = MUXSEL(0, 2, 3, 1), 2706 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2707 .pll = PLL_28, 2708 .tuner_type = TUNER_ABSENT, 2709 .tuner_addr = ADDR_UNSET, 2710 }, 2711 [BTTV_BOARD_VD012_X1] = { 2712 /* D.Heer@Phytec.de */ 2713 .name = "PHYTEC VD-012-X1 (bt878)", 2714 .video_inputs = 4, 2715 /* .audio_inputs= 0, */ 2716 .svhs = 3, 2717 .gpiomask = 0x00, 2718 .muxsel = MUXSEL(2, 3, 1), 2719 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2720 .pll = PLL_28, 2721 .tuner_type = TUNER_ABSENT, 2722 .tuner_addr = ADDR_UNSET, 2723 }, 2724 [BTTV_BOARD_VD012_X2] = { 2725 /* D.Heer@Phytec.de */ 2726 .name = "PHYTEC VD-012-X2 (bt878)", 2727 .video_inputs = 4, 2728 /* .audio_inputs= 0, */ 2729 .svhs = 3, 2730 .gpiomask = 0x00, 2731 .muxsel = MUXSEL(3, 2, 1), 2732 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2733 .pll = PLL_28, 2734 .tuner_type = TUNER_ABSENT, 2735 .tuner_addr = ADDR_UNSET, 2736 }, 2737 [BTTV_BOARD_GEOVISION_GV800S] = { 2738 /* Bruno Christo <bchristo@inf.ufsm.br> 2739 * 2740 * GeoVision GV-800(S) has 4 Conexant Fusion 878A: 2741 * 1 audio input per BT878A = 4 audio inputs 2742 * 4 video inputs per BT878A = 16 video inputs 2743 * This is the first BT878A chip of the GV-800(S). It's the 2744 * "master" chip and it controls the video inputs through an 2745 * analog multiplexer (a CD22M3494) via some GPIO pins. The 2746 * slaves should use card type 0x9e (following this one). 2747 * There is a EEPROM on the card which is currently not handled. 2748 * The audio input is not working yet. 2749 */ 2750 .name = "Geovision GV-800(S) (master)", 2751 .video_inputs = 4, 2752 /* .audio_inputs= 1, */ 2753 .tuner_type = TUNER_ABSENT, 2754 .tuner_addr = ADDR_UNSET, 2755 .svhs = NO_SVHS, 2756 .gpiomask = 0xf107f, 2757 .no_gpioirq = 1, 2758 .muxsel = MUXSEL(2, 2, 2, 2), 2759 .pll = PLL_28, 2760 .no_msp34xx = 1, 2761 .no_tda7432 = 1, 2762 .muxsel_hook = gv800s_muxsel, 2763 }, 2764 [BTTV_BOARD_GEOVISION_GV800S_SL] = { 2765 /* Bruno Christo <bchristo@inf.ufsm.br> 2766 * 2767 * GeoVision GV-800(S) has 4 Conexant Fusion 878A: 2768 * 1 audio input per BT878A = 4 audio inputs 2769 * 4 video inputs per BT878A = 16 video inputs 2770 * The 3 other BT878A chips are "slave" chips of the GV-800(S) 2771 * and should use this card type. 2772 * The audio input is not working yet. 2773 */ 2774 .name = "Geovision GV-800(S) (slave)", 2775 .video_inputs = 4, 2776 /* .audio_inputs= 1, */ 2777 .tuner_type = TUNER_ABSENT, 2778 .tuner_addr = ADDR_UNSET, 2779 .svhs = NO_SVHS, 2780 .gpiomask = 0x00, 2781 .no_gpioirq = 1, 2782 .muxsel = MUXSEL(2, 2, 2, 2), 2783 .pll = PLL_28, 2784 .no_msp34xx = 1, 2785 .no_tda7432 = 1, 2786 .muxsel_hook = gv800s_muxsel, 2787 }, 2788 [BTTV_BOARD_PV183] = { 2789 .name = "ProVideo PV183", /* 0x9f */ 2790 .video_inputs = 2, 2791 /* .audio_inputs= 0, */ 2792 .svhs = NO_SVHS, 2793 .gpiomask = 0, 2794 .muxsel = MUXSEL(2, 3), 2795 .gpiomux = { 0 }, 2796 .no_msp34xx = 1, 2797 .pll = PLL_28, 2798 .tuner_type = TUNER_ABSENT, 2799 .tuner_addr = ADDR_UNSET, 2800 }, 2801 /* ---- card 0xa0---------------------------------- */ 2802 [BTTV_BOARD_TVT_TD3116] = { 2803 .name = "Tongwei Video Technology TD-3116", 2804 .video_inputs = 16, 2805 .gpiomask = 0xc00ff, 2806 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), 2807 .muxsel_hook = td3116_muxsel, 2808 .svhs = NO_SVHS, 2809 .pll = PLL_28, 2810 .tuner_type = TUNER_ABSENT, 2811 }, 2812 [BTTV_BOARD_APOSONIC_WDVR] = { 2813 .name = "Aposonic W-DVR", 2814 .video_inputs = 4, 2815 .svhs = NO_SVHS, 2816 .muxsel = MUXSEL(2, 3, 1, 0), 2817 .tuner_type = TUNER_ABSENT, 2818 }, 2819 [BTTV_BOARD_ADLINK_MPG24] = { 2820 /* Adlink MPG24 */ 2821 .name = "Adlink MPG24", 2822 .video_inputs = 1, 2823 /* .audio_inputs= 1, */ 2824 .svhs = NO_SVHS, 2825 .muxsel = MUXSEL(2, 2, 2, 2), 2826 .tuner_type = UNSET, 2827 .tuner_addr = ADDR_UNSET, 2828 .pll = PLL_28, 2829 }, 2830 [BTTV_BOARD_BT848_CAP_14] = { 2831 .name = "Bt848 Capture 14MHz", 2832 .video_inputs = 4, 2833 .svhs = 2, 2834 .muxsel = MUXSEL(2, 3, 1, 0), 2835 .pll = PLL_14, 2836 .tuner_type = TUNER_ABSENT, 2837 }, 2838 [BTTV_BOARD_CYBERVISION_CV06] = { 2839 .name = "CyberVision CV06 (SV)", 2840 .video_inputs = 4, 2841 /* .audio_inputs= 0, */ 2842 .svhs = NO_SVHS, 2843 .muxsel = MUXSEL(2, 3, 1, 0), 2844 .pll = PLL_28, 2845 .tuner_type = TUNER_ABSENT, 2846 .tuner_addr = ADDR_UNSET, 2847 }, 2848 [BTTV_BOARD_KWORLD_VSTREAM_XPERT] = { 2849 /* Pojar George <geoubuntu@gmail.com> */ 2850 .name = "Kworld V-Stream Xpert TV PVR878", 2851 .video_inputs = 3, 2852 /* .audio_inputs= 1, */ 2853 .svhs = 2, 2854 .gpiomask = 0x001c0007, 2855 .muxsel = MUXSEL(2, 3, 1, 1), 2856 .gpiomux = { 0, 1, 2, 2 }, 2857 .gpiomute = 3, 2858 .pll = PLL_28, 2859 .tuner_type = TUNER_TENA_9533_DI, 2860 .tuner_addr = ADDR_UNSET, 2861 .has_remote = 1, 2862 .has_radio = 1, 2863 }, 2864 /* ---- card 0xa6---------------------------------- */ 2865 [BTTV_BOARD_PCI_8604PW] = { 2866 /* PCI-8604PW with special unlock sequence */ 2867 .name = "PCI-8604PW", 2868 .video_inputs = 2, 2869 /* .audio_inputs= 0, */ 2870 .svhs = NO_SVHS, 2871 /* The second input is available on CN4, if populated. 2872 * The other 5x2 header (CN2?) connects to the same inputs 2873 * as the on-board BNCs */ 2874 .muxsel = MUXSEL(2, 3), 2875 .tuner_type = TUNER_ABSENT, 2876 .no_msp34xx = 1, 2877 .no_tda7432 = 1, 2878 .pll = PLL_35, 2879 }, 2880 }; 2881 2882 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards); 2883 2884 /* ----------------------------------------------------------------------- */ 2885 2886 static unsigned char eeprom_data[256]; 2887 2888 /* 2889 * identify card 2890 */ 2891 void bttv_idcard(struct bttv *btv) 2892 { 2893 unsigned int gpiobits; 2894 int i,type; 2895 2896 /* read PCI subsystem ID */ 2897 btv->cardid = btv->c.pci->subsystem_device << 16; 2898 btv->cardid |= btv->c.pci->subsystem_vendor; 2899 2900 if (0 != btv->cardid && 0xffffffff != btv->cardid) { 2901 /* look for the card */ 2902 for (type = -1, i = 0; cards[i].id != 0; i++) 2903 if (cards[i].id == btv->cardid) 2904 type = i; 2905 2906 if (type != -1) { 2907 /* found it */ 2908 pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n", 2909 btv->c.nr, cards[type].name, cards[type].cardnr, 2910 btv->cardid & 0xffff, 2911 (btv->cardid >> 16) & 0xffff); 2912 btv->c.type = cards[type].cardnr; 2913 } else { 2914 /* 404 */ 2915 pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n", 2916 btv->c.nr, btv->cardid & 0xffff, 2917 (btv->cardid >> 16) & 0xffff); 2918 pr_debug("please mail id, board name and the correct card= insmod option to linux-media@vger.kernel.org\n"); 2919 } 2920 } 2921 2922 /* let the user override the autodetected type */ 2923 if (card[btv->c.nr] < bttv_num_tvcards) 2924 btv->c.type=card[btv->c.nr]; 2925 2926 /* print which card config we are using */ 2927 pr_info("%d: using: %s [card=%d,%s]\n", 2928 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type, 2929 card[btv->c.nr] < bttv_num_tvcards 2930 ? "insmod option" : "autodetected"); 2931 2932 /* overwrite gpio stuff ?? */ 2933 if (UNSET == audioall && UNSET == audiomux[0]) 2934 return; 2935 2936 if (UNSET != audiomux[0]) { 2937 gpiobits = 0; 2938 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { 2939 bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i]; 2940 gpiobits |= audiomux[i]; 2941 } 2942 } else { 2943 gpiobits = audioall; 2944 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { 2945 bttv_tvcards[btv->c.type].gpiomux[i] = audioall; 2946 } 2947 } 2948 bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits; 2949 pr_info("%d: gpio config override: mask=0x%x, mux=", 2950 btv->c.nr, bttv_tvcards[btv->c.type].gpiomask); 2951 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { 2952 pr_cont("%s0x%x", 2953 i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]); 2954 } 2955 pr_cont("\n"); 2956 } 2957 2958 /* 2959 * (most) board specific initialisations goes here 2960 */ 2961 2962 /* Some Modular Technology cards have an eeprom, but no subsystem ID */ 2963 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256]) 2964 { 2965 int type = -1; 2966 2967 if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13)) 2968 type = BTTV_BOARD_MODTEC_205; 2969 else if (0 == strncmp(eeprom_data+20,"Picolo",7)) 2970 type = BTTV_BOARD_EURESYS_PICOLO; 2971 else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0) 2972 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */ 2973 2974 if (-1 != type) { 2975 btv->c.type = type; 2976 pr_info("%d: detected by eeprom: %s [card=%d]\n", 2977 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type); 2978 } 2979 } 2980 2981 static void flyvideo_gpio(struct bttv *btv) 2982 { 2983 int gpio, has_remote, has_radio, is_capture_only; 2984 int is_lr90, has_tda9820_tda9821; 2985 int tuner_type = UNSET, ttype; 2986 2987 gpio_inout(0xffffff, 0); 2988 udelay(8); /* without this we would see the 0x1800 mask */ 2989 gpio = gpio_read(); 2990 /* FIXME: must restore OUR_EN ??? */ 2991 2992 /* all cards provide GPIO info, some have an additional eeprom 2993 * LR50: GPIO coding can be found lower right CP1 .. CP9 2994 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1. 2995 * GPIO14-12: n.c. 2996 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878) 2997 2998 * lowest 3 bytes are remote control codes (no handshake needed) 2999 * xxxFFF: No remote control chip soldered 3000 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered 3001 * Note: Some bits are Audio_Mask ! 3002 */ 3003 ttype = (gpio & 0x0f0000) >> 16; 3004 switch (ttype) { 3005 case 0x0: 3006 tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */ 3007 break; 3008 case 0x2: 3009 tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */ 3010 break; 3011 case 0x4: 3012 tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */ 3013 break; 3014 case 0x6: 3015 tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */ 3016 break; 3017 case 0xC: 3018 tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */ 3019 break; 3020 default: 3021 pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr); 3022 break; 3023 } 3024 3025 has_remote = gpio & 0x800000; 3026 has_radio = gpio & 0x400000; 3027 /* unknown 0x200000; 3028 * unknown2 0x100000; */ 3029 is_capture_only = !(gpio & 0x008000); /* GPIO15 */ 3030 has_tda9820_tda9821 = !(gpio & 0x004000); 3031 is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */ 3032 /* 3033 * gpio & 0x001000 output bit for audio routing */ 3034 3035 if (is_capture_only) 3036 tuner_type = TUNER_ABSENT; /* No tuner present */ 3037 3038 pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n", 3039 btv->c.nr, has_radio ? "yes" : "no", 3040 has_remote ? "yes" : "no", tuner_type, gpio); 3041 pr_info("%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n", 3042 btv->c.nr, is_lr90 ? "yes" : "no", 3043 has_tda9820_tda9821 ? "yes" : "no", 3044 is_capture_only ? "yes" : "no"); 3045 3046 if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */ 3047 btv->tuner_type = tuner_type; 3048 btv->has_radio = has_radio; 3049 3050 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80 3051 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00 3052 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */ 3053 if (has_tda9820_tda9821) 3054 btv->audio_mode_gpio = lt9415_audio; 3055 /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */ 3056 } 3057 3058 static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1, 3059 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 }; 3060 static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1, 3061 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 }; 3062 3063 static void miro_pinnacle_gpio(struct bttv *btv) 3064 { 3065 int id,msp,gpio; 3066 char *info; 3067 3068 gpio_inout(0xffffff, 0); 3069 gpio = gpio_read(); 3070 id = ((gpio>>10) & 63) -1; 3071 msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx"); 3072 if (id < 32) { 3073 btv->tuner_type = miro_tunermap[id]; 3074 if (0 == (gpio & 0x20)) { 3075 btv->has_radio = 1; 3076 if (!miro_fmtuner[id]) { 3077 btv->has_tea575x = 1; 3078 btv->tea_gpio.wren = 6; 3079 btv->tea_gpio.most = 7; 3080 btv->tea_gpio.clk = 8; 3081 btv->tea_gpio.data = 9; 3082 tea575x_init(btv); 3083 } 3084 } else { 3085 btv->has_radio = 0; 3086 } 3087 if (-1 != msp) { 3088 if (btv->c.type == BTTV_BOARD_MIRO) 3089 btv->c.type = BTTV_BOARD_MIROPRO; 3090 if (btv->c.type == BTTV_BOARD_PINNACLE) 3091 btv->c.type = BTTV_BOARD_PINNACLEPRO; 3092 } 3093 pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n", 3094 btv->c.nr, id+1, btv->tuner_type, 3095 !btv->has_radio ? "no" : 3096 (btv->has_tea575x ? "tea575x" : "fmtuner"), 3097 (-1 == msp) ? "no" : "yes"); 3098 } else { 3099 /* new cards with microtune tuner */ 3100 id = 63 - id; 3101 btv->has_radio = 0; 3102 switch (id) { 3103 case 1: 3104 info = "PAL / mono"; 3105 btv->tda9887_conf = TDA9887_INTERCARRIER; 3106 break; 3107 case 2: 3108 info = "PAL+SECAM / stereo"; 3109 btv->has_radio = 1; 3110 btv->tda9887_conf = TDA9887_QSS; 3111 break; 3112 case 3: 3113 info = "NTSC / stereo"; 3114 btv->has_radio = 1; 3115 btv->tda9887_conf = TDA9887_QSS; 3116 break; 3117 case 4: 3118 info = "PAL+SECAM / mono"; 3119 btv->tda9887_conf = TDA9887_QSS; 3120 break; 3121 case 5: 3122 info = "NTSC / mono"; 3123 btv->tda9887_conf = TDA9887_INTERCARRIER; 3124 break; 3125 case 6: 3126 info = "NTSC / stereo"; 3127 btv->tda9887_conf = TDA9887_INTERCARRIER; 3128 break; 3129 case 7: 3130 info = "PAL / stereo"; 3131 btv->tda9887_conf = TDA9887_INTERCARRIER; 3132 break; 3133 default: 3134 info = "oops: unknown card"; 3135 break; 3136 } 3137 if (-1 != msp) 3138 btv->c.type = BTTV_BOARD_PINNACLEPRO; 3139 pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n", 3140 btv->c.nr, id, info, btv->has_radio ? "yes" : "no"); 3141 btv->tuner_type = TUNER_MT2032; 3142 } 3143 } 3144 3145 /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */ 3146 #define LM1882_SYNC_DRIVE 0x200000L 3147 3148 static void init_ids_eagle(struct bttv *btv) 3149 { 3150 gpio_inout(0xffffff,0xFFFF37); 3151 gpio_write(0x200020); 3152 3153 /* flash strobe inverter ?! */ 3154 gpio_write(0x200024); 3155 3156 /* switch sync drive off */ 3157 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE); 3158 3159 /* set BT848 muxel to 2 */ 3160 btaor((2)<<5, ~(2<<5), BT848_IFORM); 3161 } 3162 3163 /* Muxsel helper for the IDS Eagle. 3164 * the eagles does not use the standard muxsel-bits but 3165 * has its own multiplexer */ 3166 static void eagle_muxsel(struct bttv *btv, unsigned int input) 3167 { 3168 gpio_bits(3, input & 3); 3169 3170 /* composite */ 3171 /* set chroma ADC to sleep */ 3172 btor(BT848_ADC_C_SLEEP, BT848_ADC); 3173 /* set to composite video */ 3174 btand(~BT848_CONTROL_COMP, BT848_E_CONTROL); 3175 btand(~BT848_CONTROL_COMP, BT848_O_CONTROL); 3176 3177 /* switch sync drive off */ 3178 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE); 3179 } 3180 3181 static void gvc1100_muxsel(struct bttv *btv, unsigned int input) 3182 { 3183 static const int masks[] = {0x30, 0x01, 0x12, 0x23}; 3184 gpio_write(masks[input%4]); 3185 } 3186 3187 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and 3188 alarms output 3189 3190 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 3191 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | | 3192 3193 IN - sensor inputs, INx - sensor inputs and TI XORed together 3194 O1,O2,O3 - alarm outputs (relays) 3195 3196 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0 3197 3198 */ 3199 3200 static void init_lmlbt4x(struct bttv *btv) 3201 { 3202 pr_debug("LMLBT4x init\n"); 3203 btwrite(0x000000, BT848_GPIO_REG_INP); 3204 gpio_inout(0xffffff, 0x0006C0); 3205 gpio_write(0x000000); 3206 } 3207 3208 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input) 3209 { 3210 unsigned int inmux = input % 8; 3211 gpio_inout( 0xf, 0xf ); 3212 gpio_bits( 0xf, inmux ); 3213 } 3214 3215 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input) 3216 { 3217 unsigned int inmux = input % 4; 3218 gpio_inout( 3<<9, 3<<9 ); 3219 gpio_bits( 3<<9, inmux<<9 ); 3220 } 3221 3222 static void geovision_muxsel(struct bttv *btv, unsigned int input) 3223 { 3224 unsigned int inmux = input % 16; 3225 gpio_inout(0xf, 0xf); 3226 gpio_bits(0xf, inmux); 3227 } 3228 3229 /* 3230 * The TD3116 has 2 74HC4051 muxes wired to the MUX0 input of a bt878. 3231 * The first 74HC4051 has the lower 8 inputs, the second one the higher 8. 3232 * The muxes are controlled via a 74HC373 latch which is connected to 3233 * GPIOs 0-7. GPIO 18 is connected to the LE signal of the latch. 3234 * Q0 of the latch is connected to the Enable (~E) input of the first 3235 * 74HC4051. Q1 - Q3 are connected to S0 - S2 of the same 74HC4051. 3236 * Q4 - Q7 are connected to the second 74HC4051 in the same way. 3237 */ 3238 3239 static void td3116_latch_value(struct bttv *btv, u32 value) 3240 { 3241 gpio_bits((1<<18) | 0xff, value); 3242 gpio_bits((1<<18) | 0xff, (1<<18) | value); 3243 udelay(1); 3244 gpio_bits((1<<18) | 0xff, value); 3245 } 3246 3247 static void td3116_muxsel(struct bttv *btv, unsigned int input) 3248 { 3249 u32 value; 3250 u32 highbit; 3251 3252 highbit = (input & 0x8) >> 3 ; 3253 3254 /* Disable outputs and set value in the mux */ 3255 value = 0x11; /* Disable outputs */ 3256 value |= ((input & 0x7) << 1) << (4 * highbit); 3257 td3116_latch_value(btv, value); 3258 3259 /* Enable the correct output */ 3260 value &= ~0x11; 3261 value |= ((highbit ^ 0x1) << 4) | highbit; 3262 td3116_latch_value(btv, value); 3263 } 3264 3265 /* ----------------------------------------------------------------------- */ 3266 3267 static void bttv_reset_audio(struct bttv *btv) 3268 { 3269 /* 3270 * BT878A has a audio-reset register. 3271 * 1. This register is an audio reset function but it is in 3272 * function-0 (video capture) address space. 3273 * 2. It is enough to do this once per power-up of the card. 3274 * 3. There is a typo in the Conexant doc -- it is not at 3275 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!). 3276 * --//Shrikumar 030609 3277 */ 3278 if (btv->id != 878) 3279 return; 3280 3281 if (bttv_debug) 3282 pr_debug("%d: BT878A ARESET\n", btv->c.nr); 3283 btwrite((1<<7), 0x058); 3284 udelay(10); 3285 btwrite( 0, 0x058); 3286 } 3287 3288 /* initialization part one -- before registering i2c bus */ 3289 void bttv_init_card1(struct bttv *btv) 3290 { 3291 switch (btv->c.type) { 3292 case BTTV_BOARD_HAUPPAUGE: 3293 case BTTV_BOARD_HAUPPAUGE878: 3294 boot_msp34xx(btv,5); 3295 break; 3296 case BTTV_BOARD_VOODOOTV_200: 3297 case BTTV_BOARD_VOODOOTV_FM: 3298 boot_msp34xx(btv,20); 3299 break; 3300 case BTTV_BOARD_AVERMEDIA98: 3301 boot_msp34xx(btv,11); 3302 break; 3303 case BTTV_BOARD_HAUPPAUGEPVR: 3304 pvr_boot(btv); 3305 break; 3306 case BTTV_BOARD_TWINHAN_DST: 3307 case BTTV_BOARD_AVDVBT_771: 3308 case BTTV_BOARD_PINNACLESAT: 3309 btv->use_i2c_hw = 1; 3310 break; 3311 case BTTV_BOARD_ADLINK_RTV24: 3312 init_RTV24( btv ); 3313 break; 3314 case BTTV_BOARD_PCI_8604PW: 3315 init_PCI8604PW(btv); 3316 break; 3317 3318 } 3319 if (!bttv_tvcards[btv->c.type].has_dvb) 3320 bttv_reset_audio(btv); 3321 } 3322 3323 /* initialization part two -- after registering i2c bus */ 3324 void bttv_init_card2(struct bttv *btv) 3325 { 3326 btv->tuner_type = UNSET; 3327 3328 if (BTTV_BOARD_UNKNOWN == btv->c.type) { 3329 bttv_readee(btv,eeprom_data,0xa0); 3330 identify_by_eeprom(btv,eeprom_data); 3331 } 3332 3333 switch (btv->c.type) { 3334 case BTTV_BOARD_MIRO: 3335 case BTTV_BOARD_MIROPRO: 3336 case BTTV_BOARD_PINNACLE: 3337 case BTTV_BOARD_PINNACLEPRO: 3338 /* miro/pinnacle */ 3339 miro_pinnacle_gpio(btv); 3340 break; 3341 case BTTV_BOARD_FLYVIDEO_98: 3342 case BTTV_BOARD_MAXI: 3343 case BTTV_BOARD_LIFE_FLYKIT: 3344 case BTTV_BOARD_FLYVIDEO: 3345 case BTTV_BOARD_TYPHOON_TVIEW: 3346 case BTTV_BOARD_CHRONOS_VS2: 3347 case BTTV_BOARD_FLYVIDEO_98FM: 3348 case BTTV_BOARD_FLYVIDEO2000: 3349 case BTTV_BOARD_FLYVIDEO98EZ: 3350 case BTTV_BOARD_CONFERENCETV: 3351 case BTTV_BOARD_LIFETEC_9415: 3352 flyvideo_gpio(btv); 3353 break; 3354 case BTTV_BOARD_HAUPPAUGE: 3355 case BTTV_BOARD_HAUPPAUGE878: 3356 case BTTV_BOARD_HAUPPAUGEPVR: 3357 /* pick up some config infos from the eeprom */ 3358 bttv_readee(btv,eeprom_data,0xa0); 3359 hauppauge_eeprom(btv); 3360 break; 3361 case BTTV_BOARD_AVERMEDIA98: 3362 case BTTV_BOARD_AVPHONE98: 3363 bttv_readee(btv,eeprom_data,0xa0); 3364 avermedia_eeprom(btv); 3365 break; 3366 case BTTV_BOARD_PXC200: 3367 init_PXC200(btv); 3368 break; 3369 case BTTV_BOARD_PICOLO_TETRA_CHIP: 3370 picolo_tetra_init(btv); 3371 break; 3372 case BTTV_BOARD_VHX: 3373 btv->has_radio = 1; 3374 btv->has_tea575x = 1; 3375 btv->tea_gpio.wren = 5; 3376 btv->tea_gpio.most = 6; 3377 btv->tea_gpio.clk = 3; 3378 btv->tea_gpio.data = 4; 3379 tea575x_init(btv); 3380 break; 3381 case BTTV_BOARD_VOBIS_BOOSTAR: 3382 case BTTV_BOARD_TERRATV: 3383 terratec_active_radio_upgrade(btv); 3384 break; 3385 case BTTV_BOARD_MAGICTVIEW061: 3386 if (btv->cardid == 0x3002144f) { 3387 btv->has_radio=1; 3388 pr_info("%d: radio detected by subsystem id (CPH05x)\n", 3389 btv->c.nr); 3390 } 3391 break; 3392 case BTTV_BOARD_STB2: 3393 if (btv->cardid == 0x3060121a) { 3394 /* Fix up entry for 3DFX VoodooTV 100, 3395 which is an OEM STB card variant. */ 3396 btv->has_radio=0; 3397 btv->tuner_type=TUNER_TEMIC_NTSC; 3398 } 3399 break; 3400 case BTTV_BOARD_OSPREY1x0: 3401 case BTTV_BOARD_OSPREY1x0_848: 3402 case BTTV_BOARD_OSPREY101_848: 3403 case BTTV_BOARD_OSPREY1x1: 3404 case BTTV_BOARD_OSPREY1x1_SVID: 3405 case BTTV_BOARD_OSPREY2xx: 3406 case BTTV_BOARD_OSPREY2x0_SVID: 3407 case BTTV_BOARD_OSPREY2x0: 3408 case BTTV_BOARD_OSPREY440: 3409 case BTTV_BOARD_OSPREY500: 3410 case BTTV_BOARD_OSPREY540: 3411 case BTTV_BOARD_OSPREY2000: 3412 bttv_readee(btv,eeprom_data,0xa0); 3413 osprey_eeprom(btv, eeprom_data); 3414 break; 3415 case BTTV_BOARD_IDS_EAGLE: 3416 init_ids_eagle(btv); 3417 break; 3418 case BTTV_BOARD_MODTEC_205: 3419 bttv_readee(btv,eeprom_data,0xa0); 3420 modtec_eeprom(btv); 3421 break; 3422 case BTTV_BOARD_LMLBT4: 3423 init_lmlbt4x(btv); 3424 break; 3425 case BTTV_BOARD_TIBET_CS16: 3426 tibetCS16_init(btv); 3427 break; 3428 case BTTV_BOARD_KODICOM_4400R: 3429 kodicom4400r_init(btv); 3430 break; 3431 case BTTV_BOARD_GEOVISION_GV800S: 3432 gv800s_init(btv); 3433 break; 3434 } 3435 3436 /* pll configuration */ 3437 if (!(btv->id==848 && btv->revision==0x11)) { 3438 /* defaults from card list */ 3439 if (PLL_28 == bttv_tvcards[btv->c.type].pll) { 3440 btv->pll.pll_ifreq=28636363; 3441 btv->pll.pll_crystal=BT848_IFORM_XT0; 3442 } 3443 if (PLL_35 == bttv_tvcards[btv->c.type].pll) { 3444 btv->pll.pll_ifreq=35468950; 3445 btv->pll.pll_crystal=BT848_IFORM_XT1; 3446 } 3447 if (PLL_14 == bttv_tvcards[btv->c.type].pll) { 3448 btv->pll.pll_ifreq = 14318181; 3449 btv->pll.pll_crystal = BT848_IFORM_XT0; 3450 } 3451 /* insmod options can override */ 3452 switch (pll[btv->c.nr]) { 3453 case 0: /* none */ 3454 btv->pll.pll_crystal = 0; 3455 btv->pll.pll_ifreq = 0; 3456 btv->pll.pll_ofreq = 0; 3457 break; 3458 case 1: /* 28 MHz */ 3459 case 28: 3460 btv->pll.pll_ifreq = 28636363; 3461 btv->pll.pll_ofreq = 0; 3462 btv->pll.pll_crystal = BT848_IFORM_XT0; 3463 break; 3464 case 2: /* 35 MHz */ 3465 case 35: 3466 btv->pll.pll_ifreq = 35468950; 3467 btv->pll.pll_ofreq = 0; 3468 btv->pll.pll_crystal = BT848_IFORM_XT1; 3469 break; 3470 case 3: /* 14 MHz */ 3471 case 14: 3472 btv->pll.pll_ifreq = 14318181; 3473 btv->pll.pll_ofreq = 0; 3474 btv->pll.pll_crystal = BT848_IFORM_XT0; 3475 break; 3476 } 3477 } 3478 btv->pll.pll_current = -1; 3479 3480 /* tuner configuration (from card list / autodetect / insmod option) */ 3481 if (UNSET != bttv_tvcards[btv->c.type].tuner_type) 3482 if (UNSET == btv->tuner_type) 3483 btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type; 3484 if (UNSET != tuner[btv->c.nr]) 3485 btv->tuner_type = tuner[btv->c.nr]; 3486 3487 if (btv->tuner_type == TUNER_ABSENT) 3488 pr_info("%d: tuner absent\n", btv->c.nr); 3489 else if (btv->tuner_type == UNSET) 3490 pr_warn("%d: tuner type unset\n", btv->c.nr); 3491 else 3492 pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type); 3493 3494 if (autoload != UNSET) { 3495 pr_warn("%d: the autoload option is obsolete\n", btv->c.nr); 3496 pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n", 3497 btv->c.nr); 3498 } 3499 3500 if (UNSET == btv->tuner_type) 3501 btv->tuner_type = TUNER_ABSENT; 3502 3503 btv->dig = bttv_tvcards[btv->c.type].has_dig_in ? 3504 bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET; 3505 btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ? 3506 UNSET : bttv_tvcards[btv->c.type].svhs; 3507 if (svhs[btv->c.nr] != UNSET) 3508 btv->svhs = svhs[btv->c.nr]; 3509 if (remote[btv->c.nr] != UNSET) 3510 btv->has_remote = remote[btv->c.nr]; 3511 3512 if (bttv_tvcards[btv->c.type].has_radio) 3513 btv->has_radio = 1; 3514 if (bttv_tvcards[btv->c.type].has_remote) 3515 btv->has_remote = 1; 3516 if (!bttv_tvcards[btv->c.type].no_gpioirq) 3517 btv->gpioirq = 1; 3518 if (bttv_tvcards[btv->c.type].volume_gpio) 3519 btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio; 3520 if (bttv_tvcards[btv->c.type].audio_mode_gpio) 3521 btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio; 3522 3523 if (btv->tuner_type == TUNER_ABSENT) 3524 return; /* no tuner or related drivers to load */ 3525 3526 if (btv->has_saa6588 || saa6588[btv->c.nr]) { 3527 /* Probe for RDS receiver chip */ 3528 static const unsigned short addrs[] = { 3529 0x20 >> 1, 3530 0x22 >> 1, 3531 I2C_CLIENT_END 3532 }; 3533 struct v4l2_subdev *sd; 3534 3535 sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3536 &btv->c.i2c_adap, "saa6588", 0, addrs); 3537 btv->has_saa6588 = (sd != NULL); 3538 } 3539 3540 /* try to detect audio/fader chips */ 3541 3542 /* First check if the user specified the audio chip via a module 3543 option. */ 3544 3545 switch (audiodev[btv->c.nr]) { 3546 case -1: 3547 return; /* do not load any audio module */ 3548 3549 case 0: /* autodetect */ 3550 break; 3551 3552 case 1: { 3553 /* The user specified that we should probe for msp3400 */ 3554 static const unsigned short addrs[] = { 3555 I2C_ADDR_MSP3400 >> 1, 3556 I2C_ADDR_MSP3400_ALT >> 1, 3557 I2C_CLIENT_END 3558 }; 3559 3560 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3561 &btv->c.i2c_adap, "msp3400", 0, addrs); 3562 if (btv->sd_msp34xx) 3563 return; 3564 goto no_audio; 3565 } 3566 3567 case 2: { 3568 /* The user specified that we should probe for tda7432 */ 3569 static const unsigned short addrs[] = { 3570 I2C_ADDR_TDA7432 >> 1, 3571 I2C_CLIENT_END 3572 }; 3573 3574 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3575 &btv->c.i2c_adap, "tda7432", 0, addrs)) 3576 return; 3577 goto no_audio; 3578 } 3579 3580 case 3: { 3581 /* The user specified that we should probe for tvaudio */ 3582 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3583 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs()); 3584 if (btv->sd_tvaudio) 3585 return; 3586 goto no_audio; 3587 } 3588 3589 default: 3590 pr_warn("%d: unknown audiodev value!\n", btv->c.nr); 3591 return; 3592 } 3593 3594 /* There were no overrides, so now we try to discover this through the 3595 card definition */ 3596 3597 /* probe for msp3400 first: this driver can detect whether or not 3598 it really is a msp3400, so it will return NULL when the device 3599 found is really something else (e.g. a tea6300). */ 3600 if (!bttv_tvcards[btv->c.type].no_msp34xx) { 3601 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3602 &btv->c.i2c_adap, "msp3400", 3603 0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1)); 3604 } else if (bttv_tvcards[btv->c.type].msp34xx_alt) { 3605 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3606 &btv->c.i2c_adap, "msp3400", 3607 0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1)); 3608 } 3609 3610 /* If we found a msp34xx, then we're done. */ 3611 if (btv->sd_msp34xx) 3612 return; 3613 3614 /* Now see if we can find one of the tvaudio devices. */ 3615 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3616 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs()); 3617 if (btv->sd_tvaudio) { 3618 /* There may be two tvaudio chips on the card, so try to 3619 find another. */ 3620 v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3621 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs()); 3622 } 3623 3624 /* it might also be a tda7432. */ 3625 if (!bttv_tvcards[btv->c.type].no_tda7432) { 3626 static const unsigned short addrs[] = { 3627 I2C_ADDR_TDA7432 >> 1, 3628 I2C_CLIENT_END 3629 }; 3630 3631 btv->sd_tda7432 = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3632 &btv->c.i2c_adap, "tda7432", 0, addrs); 3633 if (btv->sd_tda7432) 3634 return; 3635 } 3636 if (btv->sd_tvaudio) 3637 return; 3638 3639 no_audio: 3640 pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr); 3641 } 3642 3643 3644 /* initialize the tuner */ 3645 void bttv_init_tuner(struct bttv *btv) 3646 { 3647 int addr = ADDR_UNSET; 3648 3649 if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr) 3650 addr = bttv_tvcards[btv->c.type].tuner_addr; 3651 3652 if (btv->tuner_type != TUNER_ABSENT) { 3653 struct tuner_setup tun_setup; 3654 3655 /* Load tuner module before issuing tuner config call! */ 3656 if (btv->has_radio) 3657 v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3658 &btv->c.i2c_adap, "tuner", 3659 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO)); 3660 v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3661 &btv->c.i2c_adap, "tuner", 3662 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); 3663 v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3664 &btv->c.i2c_adap, "tuner", 3665 0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD)); 3666 3667 tun_setup.mode_mask = T_ANALOG_TV; 3668 tun_setup.type = btv->tuner_type; 3669 tun_setup.addr = addr; 3670 3671 if (btv->has_radio) 3672 tun_setup.mode_mask |= T_RADIO; 3673 3674 bttv_call_all(btv, tuner, s_type_addr, &tun_setup); 3675 } 3676 3677 if (btv->tda9887_conf) { 3678 struct v4l2_priv_tun_config tda9887_cfg; 3679 3680 tda9887_cfg.tuner = TUNER_TDA9887; 3681 tda9887_cfg.priv = &btv->tda9887_conf; 3682 3683 bttv_call_all(btv, tuner, s_config, &tda9887_cfg); 3684 } 3685 } 3686 3687 /* ----------------------------------------------------------------------- */ 3688 3689 static void modtec_eeprom(struct bttv *btv) 3690 { 3691 if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) { 3692 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I; 3693 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n", 3694 btv->c.nr, &eeprom_data[0x1e]); 3695 } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) { 3696 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I; 3697 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n", 3698 btv->c.nr, &eeprom_data[0x1e]); 3699 } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) { 3700 btv->tuner_type=TUNER_PHILIPS_NTSC; 3701 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n", 3702 btv->c.nr, &eeprom_data[0x1e]); 3703 } else { 3704 pr_info("%d: Modtec: Unknown TunerString: %s\n", 3705 btv->c.nr, &eeprom_data[0x1e]); 3706 } 3707 } 3708 3709 static void hauppauge_eeprom(struct bttv *btv) 3710 { 3711 struct tveeprom tv; 3712 3713 tveeprom_hauppauge_analog(&tv, eeprom_data); 3714 btv->tuner_type = tv.tuner_type; 3715 btv->has_radio = tv.has_radio; 3716 3717 pr_info("%d: Hauppauge eeprom indicates model#%d\n", 3718 btv->c.nr, tv.model); 3719 3720 /* 3721 * Some of the 878 boards have duplicate PCI IDs. Switch the board 3722 * type based on model #. 3723 */ 3724 if(tv.model == 64900) { 3725 pr_info("%d: Switching board type from %s to %s\n", 3726 btv->c.nr, 3727 bttv_tvcards[btv->c.type].name, 3728 bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name); 3729 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB; 3730 } 3731 3732 /* The 61334 needs the msp3410 to do the radio demod to get sound */ 3733 if (tv.model == 61334) 3734 btv->radio_uses_msp_demodulator = 1; 3735 } 3736 3737 /* ----------------------------------------------------------------------- */ 3738 3739 static void bttv_tea575x_set_pins(struct snd_tea575x *tea, u8 pins) 3740 { 3741 struct bttv *btv = tea->private_data; 3742 struct bttv_tea575x_gpio gpio = btv->tea_gpio; 3743 u16 val = 0; 3744 3745 val |= (pins & TEA575X_DATA) ? (1 << gpio.data) : 0; 3746 val |= (pins & TEA575X_CLK) ? (1 << gpio.clk) : 0; 3747 val |= (pins & TEA575X_WREN) ? (1 << gpio.wren) : 0; 3748 3749 gpio_bits((1 << gpio.data) | (1 << gpio.clk) | (1 << gpio.wren), val); 3750 if (btv->mbox_ior) { 3751 /* IOW and CSEL active */ 3752 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0); 3753 udelay(5); 3754 /* all inactive */ 3755 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, 3756 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); 3757 } 3758 } 3759 3760 static u8 bttv_tea575x_get_pins(struct snd_tea575x *tea) 3761 { 3762 struct bttv *btv = tea->private_data; 3763 struct bttv_tea575x_gpio gpio = btv->tea_gpio; 3764 u8 ret = 0; 3765 u16 val; 3766 3767 if (btv->mbox_ior) { 3768 /* IOR and CSEL active */ 3769 gpio_bits(btv->mbox_ior | btv->mbox_csel, 0); 3770 udelay(5); 3771 } 3772 val = gpio_read(); 3773 if (btv->mbox_ior) { 3774 /* all inactive */ 3775 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, 3776 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); 3777 } 3778 3779 if (val & (1 << gpio.data)) 3780 ret |= TEA575X_DATA; 3781 if (val & (1 << gpio.most)) 3782 ret |= TEA575X_MOST; 3783 3784 return ret; 3785 } 3786 3787 static void bttv_tea575x_set_direction(struct snd_tea575x *tea, bool output) 3788 { 3789 struct bttv *btv = tea->private_data; 3790 struct bttv_tea575x_gpio gpio = btv->tea_gpio; 3791 u32 mask = (1 << gpio.clk) | (1 << gpio.wren) | (1 << gpio.data) | 3792 (1 << gpio.most); 3793 3794 if (output) 3795 gpio_inout(mask, (1 << gpio.data) | (1 << gpio.clk) | 3796 (1 << gpio.wren)); 3797 else 3798 gpio_inout(mask, (1 << gpio.clk) | (1 << gpio.wren)); 3799 } 3800 3801 static const struct snd_tea575x_ops bttv_tea_ops = { 3802 .set_pins = bttv_tea575x_set_pins, 3803 .get_pins = bttv_tea575x_get_pins, 3804 .set_direction = bttv_tea575x_set_direction, 3805 }; 3806 3807 static int tea575x_init(struct bttv *btv) 3808 { 3809 btv->tea.private_data = btv; 3810 btv->tea.ops = &bttv_tea_ops; 3811 if (!snd_tea575x_hw_init(&btv->tea)) { 3812 pr_info("%d: detected TEA575x radio\n", btv->c.nr); 3813 btv->tea.mute = false; 3814 return 0; 3815 } 3816 3817 btv->has_tea575x = 0; 3818 btv->has_radio = 0; 3819 3820 return -ENODEV; 3821 } 3822 3823 /* ----------------------------------------------------------------------- */ 3824 3825 static int terratec_active_radio_upgrade(struct bttv *btv) 3826 { 3827 btv->has_radio = 1; 3828 btv->has_tea575x = 1; 3829 btv->tea_gpio.wren = 4; 3830 btv->tea_gpio.most = 5; 3831 btv->tea_gpio.clk = 3; 3832 btv->tea_gpio.data = 2; 3833 3834 btv->mbox_iow = 1 << 8; 3835 btv->mbox_ior = 1 << 9; 3836 btv->mbox_csel = 1 << 10; 3837 3838 if (!tea575x_init(btv)) { 3839 pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr); 3840 btv->has_saa6588 = 1; 3841 } 3842 3843 return 0; 3844 } 3845 3846 3847 /* ----------------------------------------------------------------------- */ 3848 3849 /* 3850 * minimal bootstrap for the WinTV/PVR -- upload altera firmware. 3851 * 3852 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have 3853 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be 3854 * unpacked with unzip). 3855 */ 3856 #define PVR_GPIO_DELAY 10 3857 3858 #define BTTV_ALT_DATA 0x000001 3859 #define BTTV_ALT_DCLK 0x100000 3860 #define BTTV_ALT_NCONFIG 0x800000 3861 3862 static int pvr_altera_load(struct bttv *btv, const u8 *micro, u32 microlen) 3863 { 3864 u32 n; 3865 u8 bits; 3866 int i; 3867 3868 gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG); 3869 gpio_write(0); 3870 udelay(PVR_GPIO_DELAY); 3871 3872 gpio_write(BTTV_ALT_NCONFIG); 3873 udelay(PVR_GPIO_DELAY); 3874 3875 for (n = 0; n < microlen; n++) { 3876 bits = micro[n]; 3877 for (i = 0 ; i < 8 ; i++) { 3878 gpio_bits(BTTV_ALT_DCLK,0); 3879 if (bits & 0x01) 3880 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA); 3881 else 3882 gpio_bits(BTTV_ALT_DATA,0); 3883 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK); 3884 bits >>= 1; 3885 } 3886 } 3887 gpio_bits(BTTV_ALT_DCLK,0); 3888 udelay(PVR_GPIO_DELAY); 3889 3890 /* begin Altera init loop (Not necessary,but doesn't hurt) */ 3891 for (i = 0 ; i < 30 ; i++) { 3892 gpio_bits(BTTV_ALT_DCLK,0); 3893 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK); 3894 } 3895 gpio_bits(BTTV_ALT_DCLK,0); 3896 return 0; 3897 } 3898 3899 static int pvr_boot(struct bttv *btv) 3900 { 3901 const struct firmware *fw_entry; 3902 int rc; 3903 3904 rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev); 3905 if (rc != 0) { 3906 pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr); 3907 return rc; 3908 } 3909 rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size); 3910 pr_info("%d: altera firmware upload %s\n", 3911 btv->c.nr, (rc < 0) ? "failed" : "ok"); 3912 release_firmware(fw_entry); 3913 return rc; 3914 } 3915 3916 /* ----------------------------------------------------------------------- */ 3917 /* some osprey specific stuff */ 3918 3919 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]) 3920 { 3921 int i; 3922 u32 serial = 0; 3923 int cardid = -1; 3924 3925 /* This code will never actually get called in this case.... */ 3926 if (btv->c.type == BTTV_BOARD_UNKNOWN) { 3927 /* this might be an antique... check for MMAC label in eeprom */ 3928 if (!strncmp(ee, "MMAC", 4)) { 3929 u8 checksum = 0; 3930 for (i = 0; i < 21; i++) 3931 checksum += ee[i]; 3932 if (checksum != ee[21]) 3933 return; 3934 cardid = BTTV_BOARD_OSPREY1x0_848; 3935 for (i = 12; i < 21; i++) { 3936 serial *= 10; 3937 serial += ee[i] - '0'; 3938 } 3939 } 3940 } else { 3941 unsigned short type; 3942 3943 for (i = 4 * 16; i < 8 * 16; i += 16) { 3944 u16 checksum = (__force u16)ip_compute_csum(ee + i, 16); 3945 3946 if ((checksum & 0xff) + (checksum >> 8) == 0xff) 3947 break; 3948 } 3949 if (i >= 8*16) 3950 return; 3951 ee += i; 3952 3953 /* found a valid descriptor */ 3954 type = get_unaligned_be16((__be16 *)(ee+4)); 3955 3956 switch(type) { 3957 /* 848 based */ 3958 case 0x0004: 3959 cardid = BTTV_BOARD_OSPREY1x0_848; 3960 break; 3961 case 0x0005: 3962 cardid = BTTV_BOARD_OSPREY101_848; 3963 break; 3964 3965 /* 878 based */ 3966 case 0x0012: 3967 case 0x0013: 3968 cardid = BTTV_BOARD_OSPREY1x0; 3969 break; 3970 case 0x0014: 3971 case 0x0015: 3972 cardid = BTTV_BOARD_OSPREY1x1; 3973 break; 3974 case 0x0016: 3975 case 0x0017: 3976 case 0x0020: 3977 cardid = BTTV_BOARD_OSPREY1x1_SVID; 3978 break; 3979 case 0x0018: 3980 case 0x0019: 3981 case 0x001E: 3982 case 0x001F: 3983 cardid = BTTV_BOARD_OSPREY2xx; 3984 break; 3985 case 0x001A: 3986 case 0x001B: 3987 cardid = BTTV_BOARD_OSPREY2x0_SVID; 3988 break; 3989 case 0x0040: 3990 cardid = BTTV_BOARD_OSPREY500; 3991 break; 3992 case 0x0050: 3993 case 0x0056: 3994 cardid = BTTV_BOARD_OSPREY540; 3995 /* bttv_osprey_540_init(btv); */ 3996 break; 3997 case 0x0060: 3998 case 0x0070: 3999 case 0x00A0: 4000 cardid = BTTV_BOARD_OSPREY2x0; 4001 /* enable output on select control lines */ 4002 gpio_inout(0xffffff,0x000303); 4003 break; 4004 case 0x00D8: 4005 cardid = BTTV_BOARD_OSPREY440; 4006 break; 4007 default: 4008 /* unknown...leave generic, but get serial # */ 4009 pr_info("%d: osprey eeprom: unknown card type 0x%04x\n", 4010 btv->c.nr, type); 4011 break; 4012 } 4013 serial = get_unaligned_be32((__be32 *)(ee+6)); 4014 } 4015 4016 pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n", 4017 btv->c.nr, cardid, 4018 cardid > 0 ? bttv_tvcards[cardid].name : "Unknown", serial); 4019 4020 if (cardid<0 || btv->c.type == cardid) 4021 return; 4022 4023 /* card type isn't set correctly */ 4024 if (card[btv->c.nr] < bttv_num_tvcards) { 4025 pr_warn("%d: osprey eeprom: Not overriding user specified card type\n", 4026 btv->c.nr); 4027 } else { 4028 pr_info("%d: osprey eeprom: Changing card type from %d to %d\n", 4029 btv->c.nr, btv->c.type, cardid); 4030 btv->c.type = cardid; 4031 } 4032 } 4033 4034 /* ----------------------------------------------------------------------- */ 4035 /* AVermedia specific stuff, from bktr_card.c */ 4036 4037 static int tuner_0_table[] = { 4038 TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/, 4039 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/, 4040 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL, 4041 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM, 4042 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL, 4043 TUNER_PHILIPS_FM1216ME_MK3 }; 4044 4045 static int tuner_1_table[] = { 4046 TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL, 4047 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, 4048 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, 4049 TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */ 4050 TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL}; 4051 4052 static void avermedia_eeprom(struct bttv *btv) 4053 { 4054 int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0; 4055 4056 tuner_make = (eeprom_data[0x41] & 0x7); 4057 tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3; 4058 tuner_format = (eeprom_data[0x42] & 0xf0) >> 4; 4059 btv->has_remote = (eeprom_data[0x42] & 0x01); 4060 4061 if (tuner_make == 0 || tuner_make == 2) 4062 if (tuner_format <= 0x0a) 4063 tuner_type = tuner_0_table[tuner_format]; 4064 if (tuner_make == 1) 4065 if (tuner_format <= 9) 4066 tuner_type = tuner_1_table[tuner_format]; 4067 4068 if (tuner_make == 4) 4069 if (tuner_format == 0x09) 4070 tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */ 4071 4072 pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=", 4073 btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]); 4074 if (tuner_type) { 4075 btv->tuner_type = tuner_type; 4076 pr_cont("%d", tuner_type); 4077 } else 4078 pr_cont("Unknown type"); 4079 pr_cont(" radio:%s remote control:%s\n", 4080 tuner_tv_fm ? "yes" : "no", 4081 btv->has_remote ? "yes" : "no"); 4082 } 4083 4084 /* 4085 * For Voodoo TV/FM and Voodoo 200. These cards' tuners use a TDA9880 4086 * analog demod, which is not I2C controlled like the newer and more common 4087 * TDA9887 series. Instead it has two tri-state input pins, S0 and S1, 4088 * that control the IF for the video and audio. Apparently, bttv GPIO 4089 * 0x10000 is connected to S0. S0 low selects a 38.9 MHz VIF for B/G/D/K/I 4090 * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC). 4091 */ 4092 u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits) 4093 { 4094 4095 if (btv->audio_input == TVAUDIO_INPUT_TUNER) { 4096 if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN) 4097 gpiobits |= 0x10000; 4098 else 4099 gpiobits &= ~0x10000; 4100 } 4101 4102 gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits); 4103 return gpiobits; 4104 } 4105 4106 4107 /* 4108 * reset/enable the MSP on some Hauppauge cards 4109 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)! 4110 * 4111 * Hauppauge: pin 5 4112 * Voodoo: pin 20 4113 */ 4114 static void boot_msp34xx(struct bttv *btv, int pin) 4115 { 4116 int mask = (1 << pin); 4117 4118 gpio_inout(mask,mask); 4119 gpio_bits(mask,0); 4120 mdelay(2); 4121 udelay(500); 4122 gpio_bits(mask,mask); 4123 4124 if (bttv_gpio) 4125 bttv_gpio_tracking(btv,"msp34xx"); 4126 if (bttv_verbose) 4127 pr_info("%d: Hauppauge/Voodoo msp34xx: reset line init [%d]\n", 4128 btv->c.nr, pin); 4129 } 4130 4131 /* ----------------------------------------------------------------------- */ 4132 /* Imagenation L-Model PXC200 Framegrabber */ 4133 /* This is basically the same procedure as 4134 * used by Alessandro Rubini in his pxc200 4135 * driver, but using BTTV functions */ 4136 4137 static void init_PXC200(struct bttv *btv) 4138 { 4139 static int vals[] = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d, 0x01, 0x02, 4140 0x03, 0x04, 0x05, 0x06, 0x00 }; 4141 unsigned int i; 4142 int tmp; 4143 u32 val; 4144 4145 /* Initialise GPIO-connected stuff */ 4146 gpio_inout(0xffffff, (1<<13)); 4147 gpio_write(0); 4148 udelay(3); 4149 gpio_write(1<<13); 4150 /* GPIO inputs are pulled up, so no need to drive 4151 * reset pin any longer */ 4152 gpio_bits(0xffffff, 0); 4153 if (bttv_gpio) 4154 bttv_gpio_tracking(btv,"pxc200"); 4155 4156 /* we could/should try and reset/control the AD pots? but 4157 right now we simply turned off the crushing. Without 4158 this the AGC drifts drifts 4159 remember the EN is reverse logic --> 4160 setting BT848_ADC_AGC_EN disable the AGC 4161 tboult@eecs.lehigh.edu 4162 */ 4163 4164 btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC); 4165 4166 /* Initialise MAX517 DAC */ 4167 pr_info("Setting DAC reference voltage level ...\n"); 4168 bttv_I2CWrite(btv,0x5E,0,0x80,1); 4169 4170 /* Initialise 12C508 PIC */ 4171 /* The I2CWrite and I2CRead commands are actually to the 4172 * same chips - but the R/W bit is included in the address 4173 * argument so the numbers are different */ 4174 4175 4176 pr_info("Initialising 12C508 PIC chip ...\n"); 4177 4178 /* First of all, enable the clock line. This is used in the PXC200-F */ 4179 val = btread(BT848_GPIO_DMA_CTL); 4180 val |= BT848_GPIO_DMA_CTL_GPCLKMODE; 4181 btwrite(val, BT848_GPIO_DMA_CTL); 4182 4183 /* Then, push to 0 the reset pin long enough to reset the * 4184 * device same as above for the reset line, but not the same 4185 * value sent to the GPIO-connected stuff 4186 * which one is the good one? */ 4187 gpio_inout(0xffffff,(1<<2)); 4188 gpio_write(0); 4189 udelay(10); 4190 gpio_write(1<<2); 4191 4192 for (i = 0; i < ARRAY_SIZE(vals); i++) { 4193 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1); 4194 if (tmp != -1) { 4195 pr_info("I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n", 4196 vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL)); 4197 } 4198 } 4199 4200 pr_info("PXC200 Initialised\n"); 4201 } 4202 4203 4204 4205 /* ----------------------------------------------------------------------- */ 4206 /* 4207 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock 4208 * it. This apparently involves the following procedure for each 878 chip: 4209 * 4210 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register 4211 * 4212 * 2) write to GPIO_DATA 4213 * - 0x0E 4214 * - sleep 1ms 4215 * - 0x10 + 0x0E 4216 * - sleep 10ms 4217 * - 0x0E 4218 * read from GPIO_DATA into buf (uint_32) 4219 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 ) 4220 * error. ERROR_CPLD_Check_Failed stop. 4221 * 4222 * 3) write to GPIO_DATA 4223 * - write 0x4400 + 0x0E 4224 * - sleep 10ms 4225 * - write 0x4410 + 0x0E 4226 * - sleep 1ms 4227 * - write 0x0E 4228 * read from GPIO_DATA into buf (uint_32) 4229 * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 ) 4230 * error. ERROR_CPLD_Check_Failed. 4231 */ 4232 /* ----------------------------------------------------------------------- */ 4233 static void 4234 init_RTV24 (struct bttv *btv) 4235 { 4236 uint32_t dataRead = 0; 4237 long watchdog_value = 0x0E; 4238 4239 pr_info("%d: Adlink RTV-24 initialisation in progress ...\n", 4240 btv->c.nr); 4241 4242 btwrite (0x00c3feff, BT848_GPIO_OUT_EN); 4243 4244 btwrite (0 + watchdog_value, BT848_GPIO_DATA); 4245 msleep (1); 4246 btwrite (0x10 + watchdog_value, BT848_GPIO_DATA); 4247 msleep (10); 4248 btwrite (0 + watchdog_value, BT848_GPIO_DATA); 4249 4250 dataRead = btread (BT848_GPIO_DATA); 4251 4252 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) { 4253 pr_info("%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n", 4254 btv->c.nr, dataRead); 4255 } 4256 4257 btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA); 4258 msleep (10); 4259 btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA); 4260 msleep (1); 4261 btwrite (watchdog_value, BT848_GPIO_DATA); 4262 msleep (1); 4263 dataRead = btread (BT848_GPIO_DATA); 4264 4265 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) { 4266 pr_info("%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n", 4267 btv->c.nr, dataRead); 4268 4269 return; 4270 } 4271 4272 pr_info("%d: Adlink RTV-24 initialisation complete\n", btv->c.nr); 4273 } 4274 4275 4276 4277 /* ----------------------------------------------------------------------- */ 4278 /* 4279 * The PCI-8604PW contains a CPLD, probably an ispMACH 4A, that filters 4280 * the PCI REQ signals coming from the four BT878 chips. After power 4281 * up, the CPLD does not forward requests to the bus, which prevents 4282 * the BT878 from fetching RISC instructions from memory. While the 4283 * CPLD is connected to most of the GPIOs of PCI device 0xD, only 4284 * five appear to play a role in unlocking the REQ signal. The following 4285 * sequence has been determined by trial and error without access to the 4286 * original driver. 4287 * 4288 * Eight GPIOs of device 0xC are provided on connector CN4 (4 in, 4 out). 4289 * Devices 0xE and 0xF do not appear to have anything connected to their 4290 * GPIOs. 4291 * 4292 * The correct GPIO_OUT_EN value might have some more bits set. It should 4293 * be possible to derive it from a boundary scan of the CPLD. Its JTAG 4294 * pins are routed to test points. 4295 * 4296 */ 4297 /* ----------------------------------------------------------------------- */ 4298 static void 4299 init_PCI8604PW(struct bttv *btv) 4300 { 4301 int state; 4302 4303 if ((PCI_SLOT(btv->c.pci->devfn) & ~3) != 0xC) { 4304 pr_warn("This is not a PCI-8604PW\n"); 4305 return; 4306 } 4307 4308 if (PCI_SLOT(btv->c.pci->devfn) != 0xD) 4309 return; 4310 4311 btwrite(0x080002, BT848_GPIO_OUT_EN); 4312 4313 state = (btread(BT848_GPIO_DATA) >> 21) & 7; 4314 4315 for (;;) { 4316 switch (state) { 4317 case 1: 4318 case 5: 4319 case 6: 4320 case 4: 4321 pr_debug("PCI-8604PW in state %i, toggling pin\n", 4322 state); 4323 btwrite(0x080000, BT848_GPIO_DATA); 4324 msleep(1); 4325 btwrite(0x000000, BT848_GPIO_DATA); 4326 msleep(1); 4327 break; 4328 case 7: 4329 pr_info("PCI-8604PW unlocked\n"); 4330 return; 4331 case 0: 4332 /* FIXME: If we are in state 7 and toggle GPIO[19] one 4333 more time, the CPLD goes into state 0, where PCI bus 4334 mastering is inhibited again. We have not managed to 4335 get out of that state. */ 4336 4337 pr_err("PCI-8604PW locked until reset\n"); 4338 return; 4339 default: 4340 pr_err("PCI-8604PW in unknown state %i\n", state); 4341 return; 4342 } 4343 4344 state = (state << 4) | ((btread(BT848_GPIO_DATA) >> 21) & 7); 4345 4346 switch (state) { 4347 case 0x15: 4348 case 0x56: 4349 case 0x64: 4350 case 0x47: 4351 /* The transition from state 7 to state 0 is, as explained 4352 above, valid but undesired and with this code impossible 4353 as we exit as soon as we are in state 7. 4354 case 0x70: */ 4355 break; 4356 default: 4357 pr_err("PCI-8604PW invalid transition %i -> %i\n", 4358 state >> 4, state & 7); 4359 return; 4360 } 4361 state &= 7; 4362 } 4363 } 4364 4365 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas] 4366 * 4367 * This is needed because rv605 don't use a normal multiplex, but a crosspoint 4368 * switch instead (CD22M3494E). This IC can have multiple active connections 4369 * between Xn (input) and Yn (output) pins. We need to clear any existing 4370 * connection prior to establish a new one, pulsing the STROBE pin. 4371 * 4372 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin. 4373 * GPIO pins are wired as: 4374 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller) 4375 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller) 4376 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller) 4377 * GPIO[8] - - P3[5] (microcontroller) 4378 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller) 4379 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller) 4380 * GPINTR - - P3[4] (microcontroller) 4381 * 4382 * The microcontroller is a 80C32 like. It should be possible to change xpoint 4383 * configuration either directly (as we are doing) or using the microcontroller 4384 * which is also wired to I2C interface. I have no further info on the 4385 * microcontroller features, one would need to disassembly the firmware. 4386 * note: the vendor refused to give any information on this product, all 4387 * that stuff was found using a multimeter! :) 4388 */ 4389 static void rv605_muxsel(struct bttv *btv, unsigned int input) 4390 { 4391 static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0, 4392 0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa }; 4393 4394 gpio_bits(0x07f, muxgpio[input]); 4395 4396 /* reset all connections */ 4397 gpio_bits(0x200,0x200); 4398 mdelay(1); 4399 gpio_bits(0x200,0x000); 4400 mdelay(1); 4401 4402 /* create a new connection */ 4403 gpio_bits(0x480,0x480); 4404 mdelay(1); 4405 gpio_bits(0x480,0x080); 4406 mdelay(1); 4407 } 4408 4409 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning] 4410 * 4411 * The CS16 (available on eBay cheap) is a PCI board with four Fusion 4412 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator 4413 * chips, ten eight input analog multiplexors, a not chip and a few 4414 * other components. 4415 * 4416 * 16 inputs on a secondary bracket are provided and can be selected 4417 * from each of the four capture chips. Two of the eight input 4418 * multiplexors are used to select from any of the 16 input signals. 4419 * 4420 * Unsupported hardware capabilities: 4421 * . A video output monitor on the secondary bracket can be selected from 4422 * one of the 878A chips. 4423 * . Another passthrough but I haven't spent any time investigating it. 4424 * . Digital I/O (logic level connected to GPIO) is available from an 4425 * onboard header. 4426 * 4427 * The on chip input mux should always be set to 2. 4428 * GPIO[16:19] - Video input selection 4429 * GPIO[0:3] - Video output monitor select (only available from one 878A) 4430 * GPIO[?:?] - Digital I/O. 4431 * 4432 * There is an ATMEL microcontroller with an 8031 core on board. I have not 4433 * determined what function (if any) it provides. With the microcontroller 4434 * and sync separator chips a guess is that it might have to do with video 4435 * switching and maybe some digital I/O. 4436 */ 4437 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input) 4438 { 4439 /* video mux */ 4440 gpio_bits(0x0f0000, input << 16); 4441 } 4442 4443 static void tibetCS16_init(struct bttv *btv) 4444 { 4445 /* enable gpio bits, mask obtained via btSpy */ 4446 gpio_inout(0xffffff, 0x0f7fff); 4447 gpio_write(0x0f7fff); 4448 } 4449 4450 /* 4451 * The following routines for the Kodicom-4400r get a little mind-twisting. 4452 * There is a "master" controller and three "slave" controllers, together 4453 * an analog switch which connects any of 16 cameras to any of the BT87A's. 4454 * The analog switch is controlled by the "master", but the detection order 4455 * of the four BT878A chips is in an order which I just don't understand. 4456 * The "master" is actually the second controller to be detected. The 4457 * logic on the board uses logical numbers for the 4 controllers, but 4458 * those numbers are different from the detection sequence. When working 4459 * with the analog switch, we need to "map" from the detection sequence 4460 * over to the board's logical controller number. This mapping sequence 4461 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical 4462 * unit 3, the second (which is the master) is logical unit 0, etc. 4463 * We need to maintain the status of the analog switch (which of the 16 4464 * cameras is connected to which of the 4 controllers) in sw_status array. 4465 */ 4466 4467 /* 4468 * First a routine to set the analog switch, which controls which camera 4469 * is routed to which controller. The switch comprises an X-address 4470 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a 4471 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3). 4472 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables 4473 * the switch. A STROBE bit (gpio bit 8) latches the data value into the 4474 * specified address. The idea is to set the address and data, then bring 4475 * STROBE high, and finally bring STROBE back to low. 4476 */ 4477 static void kodicom4400r_write(struct bttv *btv, 4478 unsigned char xaddr, 4479 unsigned char yaddr, 4480 unsigned char data) { 4481 unsigned int udata; 4482 4483 udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf); 4484 gpio_bits(0x1ff, udata); /* write ADDR and DAT */ 4485 gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */ 4486 gpio_bits(0x1ff, udata); /* strobe low */ 4487 } 4488 4489 /* 4490 * Next the mux select. Both the "master" and "slave" 'cards' (controllers) 4491 * use this routine. The routine finds the "master" for the card, maps 4492 * the controller number from the detected position over to the logical 4493 * number, writes the appropriate data to the analog switch, and housekeeps 4494 * the local copy of the switch information. The parameter 'input' is the 4495 * requested camera number (0 - 15). 4496 */ 4497 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input) 4498 { 4499 int xaddr, yaddr; 4500 struct bttv *mctlr; 4501 static unsigned char map[4] = {3, 0, 2, 1}; 4502 4503 mctlr = master[btv->c.nr]; 4504 if (mctlr == NULL) { /* ignore if master not yet detected */ 4505 return; 4506 } 4507 yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */ 4508 yaddr = map[yaddr]; 4509 xaddr = input & 0xf; 4510 /* Check if the controller/camera pair has changed, else ignore */ 4511 if (mctlr->sw_status[yaddr] != xaddr) 4512 { 4513 /* "open" the old switch, "close" the new one, save the new */ 4514 kodicom4400r_write(mctlr, mctlr->sw_status[yaddr], yaddr, 0); 4515 mctlr->sw_status[yaddr] = xaddr; 4516 kodicom4400r_write(mctlr, xaddr, yaddr, 1); 4517 } 4518 } 4519 4520 /* 4521 * During initialisation, we need to reset the analog switch. We 4522 * also preset the switch to map the 4 connectors on the card to the 4523 * *user's* (see above description of kodicom4400r_muxsel) channels 4524 * 0 through 3 4525 */ 4526 static void kodicom4400r_init(struct bttv *btv) 4527 { 4528 int ix; 4529 4530 gpio_inout(0x0003ff, 0x0003ff); 4531 gpio_write(1 << 9); /* reset MUX */ 4532 gpio_write(0); 4533 /* Preset camera 0 to the 4 controllers */ 4534 for (ix = 0; ix < 4; ix++) { 4535 btv->sw_status[ix] = ix; 4536 kodicom4400r_write(btv, ix, ix, 1); 4537 } 4538 /* 4539 * Since this is the "master", we need to set up the 4540 * other three controller chips' pointers to this structure 4541 * for later use in the muxsel routine. 4542 */ 4543 if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3)) 4544 return; 4545 master[btv->c.nr-1] = btv; 4546 master[btv->c.nr] = btv; 4547 master[btv->c.nr+1] = btv; 4548 master[btv->c.nr+2] = btv; 4549 } 4550 4551 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel 4552 * video multiplexers to provide up to 16 video inputs. These 4553 * multiplexers are controlled by the lower 8 GPIO pins of the 4554 * bt878. The multiplexers probably Pericom PI5V331Q or similar. 4555 4556 * xxx0 is pin xxx of multiplexer U5, 4557 * yyy1 is pin yyy of multiplexer U2 4558 */ 4559 #define ENA0 0x01 4560 #define ENB0 0x02 4561 #define ENA1 0x04 4562 #define ENB1 0x08 4563 4564 #define IN10 0x10 4565 #define IN00 0x20 4566 #define IN11 0x40 4567 #define IN01 0x80 4568 4569 static void xguard_muxsel(struct bttv *btv, unsigned int input) 4570 { 4571 static const int masks[] = { 4572 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10, 4573 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10, 4574 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11, 4575 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11, 4576 }; 4577 gpio_write(masks[input%16]); 4578 } 4579 static void picolo_tetra_init(struct bttv *btv) 4580 { 4581 /*This is the video input redirection functionality : I DID NOT USE IT. */ 4582 btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */ 4583 btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/ 4584 } 4585 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input) 4586 { 4587 4588 dprintk("%d : picolo_tetra_muxsel => input = %d\n", btv->c.nr, input); 4589 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/ 4590 /*GPIO[20]&GPIO[21] used to choose the right input*/ 4591 btwrite (input<<20,BT848_GPIO_DATA); 4592 4593 } 4594 4595 /* 4596 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>] 4597 * 4598 * The IVC120G security card has 4 i2c controlled TDA8540 matrix 4599 * switchers to provide 16 channels to MUX0. The TDA8540's have 4600 * 4 independent outputs and as such the IVC120G also has the 4601 * optional "Monitor Out" bus. This allows the card to be looking 4602 * at one input while the monitor is looking at another. 4603 * 4604 * Since I've couldn't be bothered figuring out how to add an 4605 * independent muxsel for the monitor bus, I've just set it to 4606 * whatever the card is looking at. 4607 * 4608 * OUT0 of the TDA8540's is connected to MUX0 (0x03) 4609 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C) 4610 * 4611 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03) 4612 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03) 4613 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03) 4614 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03) 4615 * 4616 */ 4617 4618 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */ 4619 #define I2C_TDA8540 0x90 4620 #define I2C_TDA8540_ALT1 0x92 4621 #define I2C_TDA8540_ALT2 0x94 4622 #define I2C_TDA8540_ALT3 0x96 4623 #define I2C_TDA8540_ALT4 0x98 4624 #define I2C_TDA8540_ALT5 0x9a 4625 #define I2C_TDA8540_ALT6 0x9c 4626 4627 static void ivc120_muxsel(struct bttv *btv, unsigned int input) 4628 { 4629 /* Simple maths */ 4630 int key = input % 4; 4631 int matrix = input / 4; 4632 4633 dprintk("%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n", 4634 btv->c.nr, input, matrix, key); 4635 4636 /* Handles the input selection on the TDA8540's */ 4637 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00, 4638 ((matrix == 3) ? (key | key << 2) : 0x00), 1); 4639 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00, 4640 ((matrix == 0) ? (key | key << 2) : 0x00), 1); 4641 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00, 4642 ((matrix == 1) ? (key | key << 2) : 0x00), 1); 4643 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00, 4644 ((matrix == 2) ? (key | key << 2) : 0x00), 1); 4645 4646 /* Handles the output enables on the TDA8540's */ 4647 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02, 4648 ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */ 4649 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02, 4650 ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */ 4651 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02, 4652 ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */ 4653 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02, 4654 ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */ 4655 4656 /* 878's MUX0 is already selected for input via muxsel values */ 4657 } 4658 4659 4660 /* PXC200 muxsel helper 4661 * luke@syseng.anu.edu.au 4662 * another transplant 4663 * from Alessandro Rubini (rubini@linux.it) 4664 * 4665 * There are 4 kinds of cards: 4666 * PXC200L which is bt848 4667 * PXC200F which is bt848 with PIC controlling mux 4668 * PXC200AL which is bt878 4669 * PXC200AF which is bt878 with PIC controlling mux 4670 */ 4671 #define PX_CFG_PXC200F 0x01 4672 #define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */ 4673 #define PX_I2C_PIC 0x0f 4674 #define PX_PXC200A_CARDID 0x200a1295 4675 #define PX_I2C_CMD_CFG 0x00 4676 4677 static void PXC200_muxsel(struct bttv *btv, unsigned int input) 4678 { 4679 int rc; 4680 long mux; 4681 int bitmask; 4682 unsigned char buf[2]; 4683 4684 /* Read PIC config to determine if this is a PXC200F */ 4685 /* PX_I2C_CMD_CFG*/ 4686 buf[0]=0; 4687 buf[1]=0; 4688 rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1); 4689 if (rc) { 4690 pr_debug("%d: PXC200_muxsel: pic cfg write failed:%d\n", 4691 btv->c.nr, rc); 4692 /* not PXC ? do nothing */ 4693 return; 4694 } 4695 4696 rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL); 4697 if (!(rc & PX_CFG_PXC200F)) { 4698 pr_debug("%d: PXC200_muxsel: not PXC200F rc:%d\n", 4699 btv->c.nr, rc); 4700 return; 4701 } 4702 4703 4704 /* The multiplexer in the 200F is handled by the GPIO port */ 4705 /* get correct mapping between inputs */ 4706 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */ 4707 /* ** not needed!? */ 4708 mux = input; 4709 4710 /* make sure output pins are enabled */ 4711 /* bitmask=0x30f; */ 4712 bitmask=0x302; 4713 /* check whether we have a PXC200A */ 4714 if (btv->cardid == PX_PXC200A_CARDID) { 4715 bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */ 4716 bitmask |= 7<<4; /* the DAC */ 4717 } 4718 btwrite(bitmask, BT848_GPIO_OUT_EN); 4719 4720 bitmask = btread(BT848_GPIO_DATA); 4721 if (btv->cardid == PX_PXC200A_CARDID) 4722 bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7); 4723 else /* older device */ 4724 bitmask = (bitmask & ~0x300) | ((mux & 3) << 8); 4725 btwrite(bitmask,BT848_GPIO_DATA); 4726 4727 /* 4728 * Was "to be safe, set the bt848 to input 0" 4729 * Actually, since it's ok at load time, better not messing 4730 * with these bits (on PXC200AF you need to set mux 2 here) 4731 * 4732 * needed because bttv-driver sets mux before calling this function 4733 */ 4734 if (btv->cardid == PX_PXC200A_CARDID) 4735 btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM); 4736 else /* older device */ 4737 btand(~BT848_IFORM_MUXSEL,BT848_IFORM); 4738 4739 pr_debug("%d: setting input channel to:%d\n", btv->c.nr, (int)mux); 4740 } 4741 4742 static void phytec_muxsel(struct bttv *btv, unsigned int input) 4743 { 4744 unsigned int mux = input % 4; 4745 4746 if (input == btv->svhs) 4747 mux = 0; 4748 4749 gpio_bits(0x3, mux); 4750 } 4751 4752 /* 4753 * GeoVision GV-800(S) functions 4754 * Bruno Christo <bchristo@inf.ufsm.br> 4755 */ 4756 4757 /* This is a function to control the analog switch, which determines which 4758 * camera is routed to which controller. The switch comprises an X-address 4759 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a 4760 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3). 4761 * A data value (gpio bit 18) of '1' enables the switch, and '0' disables 4762 * the switch. A STROBE bit (gpio bit 17) latches the data value into the 4763 * specified address. There is also a chip select (gpio bit 16). 4764 * The idea is to set the address and chip select together, bring 4765 * STROBE high, write the data, and finally bring STROBE back to low. 4766 */ 4767 static void gv800s_write(struct bttv *btv, 4768 unsigned char xaddr, 4769 unsigned char yaddr, 4770 unsigned char data) { 4771 /* On the "master" 878A: 4772 * GPIO bits 0-9 are used for the analog switch: 4773 * 00 - 03: camera selector 4774 * 04 - 06: 878A (controller) selector 4775 * 16: cselect 4776 * 17: strobe 4777 * 18: data (1->on, 0->off) 4778 * 19: reset 4779 */ 4780 const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4); 4781 const u32 CSELECT = 1<<16; 4782 const u32 STROBE = 1<<17; 4783 const u32 DATA = data<<18; 4784 4785 gpio_bits(0x1007f, ADDRESS | CSELECT); /* write ADDRESS and CSELECT */ 4786 gpio_bits(0x20000, STROBE); /* STROBE high */ 4787 gpio_bits(0x40000, DATA); /* write DATA */ 4788 gpio_bits(0x20000, ~STROBE); /* STROBE low */ 4789 } 4790 4791 /* 4792 * GeoVision GV-800(S) muxsel 4793 * 4794 * Each of the 4 cards (controllers) use this function. 4795 * The controller using this function selects the input through the GPIO pins 4796 * of the "master" card. A pointer to this card is stored in master[btv->c.nr]. 4797 * 4798 * The parameter 'input' is the requested camera number (0-4) on the controller. 4799 * The map array has the address of each input. Note that the addresses in the 4800 * array are in the sequence the original GeoVision driver uses, that is, set 4801 * every controller to input 0, then to input 1, 2, 3, repeat. This means that 4802 * the physical "camera 1" connector corresponds to controller 0 input 0, 4803 * "camera 2" corresponds to controller 1 input 0, and so on. 4804 * 4805 * After getting the input address, the function then writes the appropriate 4806 * data to the analog switch, and housekeeps the local copy of the switch 4807 * information. 4808 */ 4809 static void gv800s_muxsel(struct bttv *btv, unsigned int input) 4810 { 4811 struct bttv *mctlr; 4812 int xaddr, yaddr; 4813 static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 }, 4814 { 0x1, 0x5, 0xb, 0x7 }, 4815 { 0x2, 0x8, 0xc, 0xe }, 4816 { 0x3, 0x9, 0xd, 0xf } }; 4817 input = input%4; 4818 mctlr = master[btv->c.nr]; 4819 if (mctlr == NULL) { 4820 /* do nothing until the "master" is detected */ 4821 return; 4822 } 4823 yaddr = (btv->c.nr - mctlr->c.nr) & 3; 4824 xaddr = map[yaddr][input] & 0xf; 4825 4826 /* Check if the controller/camera pair has changed, ignore otherwise */ 4827 if (mctlr->sw_status[yaddr] != xaddr) { 4828 /* disable the old switch, enable the new one and save status */ 4829 gv800s_write(mctlr, mctlr->sw_status[yaddr], yaddr, 0); 4830 mctlr->sw_status[yaddr] = xaddr; 4831 gv800s_write(mctlr, xaddr, yaddr, 1); 4832 } 4833 } 4834 4835 /* GeoVision GV-800(S) "master" chip init */ 4836 static void gv800s_init(struct bttv *btv) 4837 { 4838 int ix; 4839 4840 gpio_inout(0xf107f, 0xf107f); 4841 gpio_write(1<<19); /* reset the analog MUX */ 4842 gpio_write(0); 4843 4844 /* Preset camera 0 to the 4 controllers */ 4845 for (ix = 0; ix < 4; ix++) { 4846 btv->sw_status[ix] = ix; 4847 gv800s_write(btv, ix, ix, 1); 4848 } 4849 4850 /* Inputs on the "master" controller need this brightness fix */ 4851 bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1); 4852 4853 if (btv->c.nr > BTTV_MAX-4) 4854 return; 4855 /* 4856 * Store the "master" controller pointer in the master 4857 * array for later use in the muxsel function. 4858 */ 4859 master[btv->c.nr] = btv; 4860 master[btv->c.nr+1] = btv; 4861 master[btv->c.nr+2] = btv; 4862 master[btv->c.nr+3] = btv; 4863 } 4864 4865 /* ----------------------------------------------------------------------- */ 4866 /* motherboard chipset specific stuff */ 4867 4868 void __init bttv_check_chipset(void) 4869 { 4870 struct pci_dev *dev = NULL; 4871 4872 if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF)) 4873 triton1 = 1; 4874 if (pci_pci_problems & PCIPCI_VSFX) 4875 vsfx = 1; 4876 #ifdef PCIPCI_ALIMAGIK 4877 if (pci_pci_problems & PCIPCI_ALIMAGIK) 4878 latency = 0x0A; 4879 #endif 4880 4881 4882 /* print warnings about any quirks found */ 4883 if (triton1) 4884 pr_info("Host bridge needs ETBF enabled\n"); 4885 if (vsfx) 4886 pr_info("Host bridge needs VSFX enabled\n"); 4887 if (UNSET != latency) 4888 pr_info("pci latency fixup [%d]\n", latency); 4889 while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL, 4890 PCI_DEVICE_ID_INTEL_82441, dev))) { 4891 unsigned char b; 4892 pci_read_config_byte(dev, 0x53, &b); 4893 if (bttv_debug) 4894 pr_info("Host bridge: 82441FX Natoma, bufcon=0x%02x\n", 4895 b); 4896 } 4897 } 4898 4899 int bttv_handle_chipset(struct bttv *btv) 4900 { 4901 unsigned char command; 4902 4903 if (!triton1 && !vsfx && UNSET == latency) 4904 return 0; 4905 4906 if (bttv_verbose) { 4907 if (triton1) 4908 pr_info("%d: enabling ETBF (430FX/VP3 compatibility)\n", 4909 btv->c.nr); 4910 if (vsfx && btv->id >= 878) 4911 pr_info("%d: enabling VSFX\n", btv->c.nr); 4912 if (UNSET != latency) 4913 pr_info("%d: setting pci timer to %d\n", 4914 btv->c.nr, latency); 4915 } 4916 4917 if (btv->id < 878) { 4918 /* bt848 (mis)uses a bit in the irq mask for etbf */ 4919 if (triton1) 4920 btv->triton1 = BT848_INT_ETBF; 4921 } else { 4922 /* bt878 has a bit in the pci config space for it */ 4923 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command); 4924 if (triton1) 4925 command |= BT878_EN_TBFX; 4926 if (vsfx) 4927 command |= BT878_EN_VSFX; 4928 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command); 4929 } 4930 if (UNSET != latency) 4931 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency); 4932 return 0; 4933 } 4934