1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * tw9910 Video Driver 4 * 5 * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org> 6 * 7 * Copyright (C) 2008 Renesas Solutions Corp. 8 * Kuninori Morimoto <morimoto.kuninori@renesas.com> 9 * 10 * Based on ov772x driver, 11 * 12 * Copyright (C) 2008 Kuninori Morimoto <morimoto.kuninori@renesas.com> 13 * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net> 14 * Copyright (C) 2008 Magnus Damm 15 * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> 16 */ 17 18 #include <linux/clk.h> 19 #include <linux/delay.h> 20 #include <linux/gpio/consumer.h> 21 #include <linux/i2c.h> 22 #include <linux/init.h> 23 #include <linux/kernel.h> 24 #include <linux/module.h> 25 #include <linux/slab.h> 26 #include <linux/v4l2-mediabus.h> 27 #include <linux/videodev2.h> 28 29 #include <media/i2c/tw9910.h> 30 #include <media/v4l2-subdev.h> 31 32 #define GET_ID(val) ((val & 0xF8) >> 3) 33 #define GET_REV(val) (val & 0x07) 34 35 /* 36 * register offset 37 */ 38 #define ID 0x00 /* Product ID Code Register */ 39 #define STATUS1 0x01 /* Chip Status Register I */ 40 #define INFORM 0x02 /* Input Format */ 41 #define OPFORM 0x03 /* Output Format Control Register */ 42 #define DLYCTR 0x04 /* Hysteresis and HSYNC Delay Control */ 43 #define OUTCTR1 0x05 /* Output Control I */ 44 #define ACNTL1 0x06 /* Analog Control Register 1 */ 45 #define CROP_HI 0x07 /* Cropping Register, High */ 46 #define VDELAY_LO 0x08 /* Vertical Delay Register, Low */ 47 #define VACTIVE_LO 0x09 /* Vertical Active Register, Low */ 48 #define HDELAY_LO 0x0A /* Horizontal Delay Register, Low */ 49 #define HACTIVE_LO 0x0B /* Horizontal Active Register, Low */ 50 #define CNTRL1 0x0C /* Control Register I */ 51 #define VSCALE_LO 0x0D /* Vertical Scaling Register, Low */ 52 #define SCALE_HI 0x0E /* Scaling Register, High */ 53 #define HSCALE_LO 0x0F /* Horizontal Scaling Register, Low */ 54 #define BRIGHT 0x10 /* BRIGHTNESS Control Register */ 55 #define CONTRAST 0x11 /* CONTRAST Control Register */ 56 #define SHARPNESS 0x12 /* SHARPNESS Control Register I */ 57 #define SAT_U 0x13 /* Chroma (U) Gain Register */ 58 #define SAT_V 0x14 /* Chroma (V) Gain Register */ 59 #define HUE 0x15 /* Hue Control Register */ 60 #define CORING1 0x17 61 #define CORING2 0x18 /* Coring and IF compensation */ 62 #define VBICNTL 0x19 /* VBI Control Register */ 63 #define ACNTL2 0x1A /* Analog Control 2 */ 64 #define OUTCTR2 0x1B /* Output Control 2 */ 65 #define SDT 0x1C /* Standard Selection */ 66 #define SDTR 0x1D /* Standard Recognition */ 67 #define TEST 0x1F /* Test Control Register */ 68 #define CLMPG 0x20 /* Clamping Gain */ 69 #define IAGC 0x21 /* Individual AGC Gain */ 70 #define AGCGAIN 0x22 /* AGC Gain */ 71 #define PEAKWT 0x23 /* White Peak Threshold */ 72 #define CLMPL 0x24 /* Clamp level */ 73 #define SYNCT 0x25 /* Sync Amplitude */ 74 #define MISSCNT 0x26 /* Sync Miss Count Register */ 75 #define PCLAMP 0x27 /* Clamp Position Register */ 76 #define VCNTL1 0x28 /* Vertical Control I */ 77 #define VCNTL2 0x29 /* Vertical Control II */ 78 #define CKILL 0x2A /* Color Killer Level Control */ 79 #define COMB 0x2B /* Comb Filter Control */ 80 #define LDLY 0x2C /* Luma Delay and H Filter Control */ 81 #define MISC1 0x2D /* Miscellaneous Control I */ 82 #define LOOP 0x2E /* LOOP Control Register */ 83 #define MISC2 0x2F /* Miscellaneous Control II */ 84 #define MVSN 0x30 /* Macrovision Detection */ 85 #define STATUS2 0x31 /* Chip STATUS II */ 86 #define HFREF 0x32 /* H monitor */ 87 #define CLMD 0x33 /* CLAMP MODE */ 88 #define IDCNTL 0x34 /* ID Detection Control */ 89 #define CLCNTL1 0x35 /* Clamp Control I */ 90 #define ANAPLLCTL 0x4C 91 #define VBIMIN 0x4D 92 #define HSLOWCTL 0x4E 93 #define WSS3 0x4F 94 #define FILLDATA 0x50 95 #define SDID 0x51 96 #define DID 0x52 97 #define WSS1 0x53 98 #define WSS2 0x54 99 #define VVBI 0x55 100 #define LCTL6 0x56 101 #define LCTL7 0x57 102 #define LCTL8 0x58 103 #define LCTL9 0x59 104 #define LCTL10 0x5A 105 #define LCTL11 0x5B 106 #define LCTL12 0x5C 107 #define LCTL13 0x5D 108 #define LCTL14 0x5E 109 #define LCTL15 0x5F 110 #define LCTL16 0x60 111 #define LCTL17 0x61 112 #define LCTL18 0x62 113 #define LCTL19 0x63 114 #define LCTL20 0x64 115 #define LCTL21 0x65 116 #define LCTL22 0x66 117 #define LCTL23 0x67 118 #define LCTL24 0x68 119 #define LCTL25 0x69 120 #define LCTL26 0x6A 121 #define HSBEGIN 0x6B 122 #define HSEND 0x6C 123 #define OVSDLY 0x6D 124 #define OVSEND 0x6E 125 #define VBIDELAY 0x6F 126 127 /* 128 * register detail 129 */ 130 131 /* INFORM */ 132 #define FC27_ON 0x40 /* 1 : Input crystal clock frequency is 27MHz */ 133 #define FC27_FF 0x00 /* 0 : Square pixel mode. */ 134 /* Must use 24.54MHz for 60Hz field rate */ 135 /* source or 29.5MHz for 50Hz field rate */ 136 #define IFSEL_S 0x10 /* 01 : S-video decoding */ 137 #define IFSEL_C 0x00 /* 00 : Composite video decoding */ 138 /* Y input video selection */ 139 #define YSEL_M0 0x00 /* 00 : Mux0 selected */ 140 #define YSEL_M1 0x04 /* 01 : Mux1 selected */ 141 #define YSEL_M2 0x08 /* 10 : Mux2 selected */ 142 #define YSEL_M3 0x10 /* 11 : Mux3 selected */ 143 144 /* OPFORM */ 145 #define MODE 0x80 /* 0 : CCIR601 compatible YCrCb 4:2:2 format */ 146 /* 1 : ITU-R-656 compatible data sequence format */ 147 #define LEN 0x40 /* 0 : 8-bit YCrCb 4:2:2 output format */ 148 /* 1 : 16-bit YCrCb 4:2:2 output format.*/ 149 #define LLCMODE 0x20 /* 1 : LLC output mode. */ 150 /* 0 : free-run output mode */ 151 #define AINC 0x10 /* Serial interface auto-indexing control */ 152 /* 0 : auto-increment */ 153 /* 1 : non-auto */ 154 #define VSCTL 0x08 /* 1 : Vertical out ctrl by DVALID */ 155 /* 0 : Vertical out ctrl by HACTIVE and DVALID */ 156 #define OEN_TRI_SEL_MASK 0x07 157 #define OEN_TRI_SEL_ALL_ON 0x00 /* Enable output for Rev0/Rev1 */ 158 #define OEN_TRI_SEL_ALL_OFF_r0 0x06 /* All tri-stated for Rev0 */ 159 #define OEN_TRI_SEL_ALL_OFF_r1 0x07 /* All tri-stated for Rev1 */ 160 161 /* OUTCTR1 */ 162 #define VSP_LO 0x00 /* 0 : VS pin output polarity is active low */ 163 #define VSP_HI 0x80 /* 1 : VS pin output polarity is active high. */ 164 /* VS pin output control */ 165 #define VSSL_VSYNC 0x00 /* 0 : VSYNC */ 166 #define VSSL_VACT 0x10 /* 1 : VACT */ 167 #define VSSL_FIELD 0x20 /* 2 : FIELD */ 168 #define VSSL_VVALID 0x30 /* 3 : VVALID */ 169 #define VSSL_ZERO 0x70 /* 7 : 0 */ 170 #define HSP_LOW 0x00 /* 0 : HS pin output polarity is active low */ 171 #define HSP_HI 0x08 /* 1 : HS pin output polarity is active high.*/ 172 /* HS pin output control */ 173 #define HSSL_HACT 0x00 /* 0 : HACT */ 174 #define HSSL_HSYNC 0x01 /* 1 : HSYNC */ 175 #define HSSL_DVALID 0x02 /* 2 : DVALID */ 176 #define HSSL_HLOCK 0x03 /* 3 : HLOCK */ 177 #define HSSL_ASYNCW 0x04 /* 4 : ASYNCW */ 178 #define HSSL_ZERO 0x07 /* 7 : 0 */ 179 180 /* ACNTL1 */ 181 #define SRESET 0x80 /* resets the device to its default state 182 * but all register content remain unchanged. 183 * This bit is self-resetting. 184 */ 185 #define ACNTL1_PDN_MASK 0x0e 186 #define CLK_PDN 0x08 /* system clock power down */ 187 #define Y_PDN 0x04 /* Luma ADC power down */ 188 #define C_PDN 0x02 /* Chroma ADC power down */ 189 190 /* ACNTL2 */ 191 #define ACNTL2_PDN_MASK 0x40 192 #define PLL_PDN 0x40 /* PLL power down */ 193 194 /* VBICNTL */ 195 196 /* RTSEL : control the real time signal output from the MPOUT pin */ 197 #define RTSEL_MASK 0x07 198 #define RTSEL_VLOSS 0x00 /* 0000 = Video loss */ 199 #define RTSEL_HLOCK 0x01 /* 0001 = H-lock */ 200 #define RTSEL_SLOCK 0x02 /* 0010 = S-lock */ 201 #define RTSEL_VLOCK 0x03 /* 0011 = V-lock */ 202 #define RTSEL_MONO 0x04 /* 0100 = MONO */ 203 #define RTSEL_DET50 0x05 /* 0101 = DET50 */ 204 #define RTSEL_FIELD 0x06 /* 0110 = FIELD */ 205 #define RTSEL_RTCO 0x07 /* 0111 = RTCO ( Real Time Control ) */ 206 207 /* HSYNC start and end are constant for now */ 208 #define HSYNC_START 0x0260 209 #define HSYNC_END 0x0300 210 211 /* 212 * structure 213 */ 214 215 struct tw9910_scale_ctrl { 216 char *name; 217 unsigned short width; 218 unsigned short height; 219 u16 hscale; 220 u16 vscale; 221 }; 222 223 struct tw9910_priv { 224 struct v4l2_subdev subdev; 225 struct clk *clk; 226 struct tw9910_video_info *info; 227 struct gpio_desc *pdn_gpio; 228 struct gpio_desc *rstb_gpio; 229 const struct tw9910_scale_ctrl *scale; 230 v4l2_std_id norm; 231 u32 revision; 232 }; 233 234 static const struct tw9910_scale_ctrl tw9910_ntsc_scales[] = { 235 { 236 .name = "NTSC SQ", 237 .width = 640, 238 .height = 480, 239 .hscale = 0x0100, 240 .vscale = 0x0100, 241 }, 242 { 243 .name = "NTSC CCIR601", 244 .width = 720, 245 .height = 480, 246 .hscale = 0x0100, 247 .vscale = 0x0100, 248 }, 249 { 250 .name = "NTSC SQ (CIF)", 251 .width = 320, 252 .height = 240, 253 .hscale = 0x0200, 254 .vscale = 0x0200, 255 }, 256 { 257 .name = "NTSC CCIR601 (CIF)", 258 .width = 360, 259 .height = 240, 260 .hscale = 0x0200, 261 .vscale = 0x0200, 262 }, 263 { 264 .name = "NTSC SQ (QCIF)", 265 .width = 160, 266 .height = 120, 267 .hscale = 0x0400, 268 .vscale = 0x0400, 269 }, 270 { 271 .name = "NTSC CCIR601 (QCIF)", 272 .width = 180, 273 .height = 120, 274 .hscale = 0x0400, 275 .vscale = 0x0400, 276 }, 277 }; 278 279 static const struct tw9910_scale_ctrl tw9910_pal_scales[] = { 280 { 281 .name = "PAL SQ", 282 .width = 768, 283 .height = 576, 284 .hscale = 0x0100, 285 .vscale = 0x0100, 286 }, 287 { 288 .name = "PAL CCIR601", 289 .width = 720, 290 .height = 576, 291 .hscale = 0x0100, 292 .vscale = 0x0100, 293 }, 294 { 295 .name = "PAL SQ (CIF)", 296 .width = 384, 297 .height = 288, 298 .hscale = 0x0200, 299 .vscale = 0x0200, 300 }, 301 { 302 .name = "PAL CCIR601 (CIF)", 303 .width = 360, 304 .height = 288, 305 .hscale = 0x0200, 306 .vscale = 0x0200, 307 }, 308 { 309 .name = "PAL SQ (QCIF)", 310 .width = 192, 311 .height = 144, 312 .hscale = 0x0400, 313 .vscale = 0x0400, 314 }, 315 { 316 .name = "PAL CCIR601 (QCIF)", 317 .width = 180, 318 .height = 144, 319 .hscale = 0x0400, 320 .vscale = 0x0400, 321 }, 322 }; 323 324 /* 325 * general function 326 */ 327 static struct tw9910_priv *to_tw9910(const struct i2c_client *client) 328 { 329 return container_of(i2c_get_clientdata(client), struct tw9910_priv, 330 subdev); 331 } 332 333 static int tw9910_mask_set(struct i2c_client *client, u8 command, 334 u8 mask, u8 set) 335 { 336 s32 val = i2c_smbus_read_byte_data(client, command); 337 338 if (val < 0) 339 return val; 340 341 val &= ~mask; 342 val |= set & mask; 343 344 return i2c_smbus_write_byte_data(client, command, val); 345 } 346 347 static int tw9910_set_scale(struct i2c_client *client, 348 const struct tw9910_scale_ctrl *scale) 349 { 350 int ret; 351 352 ret = i2c_smbus_write_byte_data(client, SCALE_HI, 353 (scale->vscale & 0x0F00) >> 4 | 354 (scale->hscale & 0x0F00) >> 8); 355 if (ret < 0) 356 return ret; 357 358 ret = i2c_smbus_write_byte_data(client, HSCALE_LO, 359 scale->hscale & 0x00FF); 360 if (ret < 0) 361 return ret; 362 363 ret = i2c_smbus_write_byte_data(client, VSCALE_LO, 364 scale->vscale & 0x00FF); 365 366 return ret; 367 } 368 369 static int tw9910_set_hsync(struct i2c_client *client) 370 { 371 struct tw9910_priv *priv = to_tw9910(client); 372 int ret; 373 374 /* bit 10 - 3 */ 375 ret = i2c_smbus_write_byte_data(client, HSBEGIN, 376 (HSYNC_START & 0x07F8) >> 3); 377 if (ret < 0) 378 return ret; 379 380 /* bit 10 - 3 */ 381 ret = i2c_smbus_write_byte_data(client, HSEND, 382 (HSYNC_END & 0x07F8) >> 3); 383 if (ret < 0) 384 return ret; 385 386 /* So far only revisions 0 and 1 have been seen. */ 387 /* bit 2 - 0 */ 388 if (priv->revision == 1) 389 ret = tw9910_mask_set(client, HSLOWCTL, 0x77, 390 (HSYNC_START & 0x0007) << 4 | 391 (HSYNC_END & 0x0007)); 392 393 return ret; 394 } 395 396 static void tw9910_reset(struct i2c_client *client) 397 { 398 tw9910_mask_set(client, ACNTL1, SRESET, SRESET); 399 usleep_range(1000, 5000); 400 } 401 402 static int tw9910_power(struct i2c_client *client, int enable) 403 { 404 int ret; 405 u8 acntl1; 406 u8 acntl2; 407 408 if (enable) { 409 acntl1 = 0; 410 acntl2 = 0; 411 } else { 412 acntl1 = CLK_PDN | Y_PDN | C_PDN; 413 acntl2 = PLL_PDN; 414 } 415 416 ret = tw9910_mask_set(client, ACNTL1, ACNTL1_PDN_MASK, acntl1); 417 if (ret < 0) 418 return ret; 419 420 return tw9910_mask_set(client, ACNTL2, ACNTL2_PDN_MASK, acntl2); 421 } 422 423 static const struct tw9910_scale_ctrl *tw9910_select_norm(v4l2_std_id norm, 424 u32 width, u32 height) 425 { 426 const struct tw9910_scale_ctrl *scale; 427 const struct tw9910_scale_ctrl *ret = NULL; 428 __u32 diff = 0xffffffff, tmp; 429 int size, i; 430 431 if (norm & V4L2_STD_NTSC) { 432 scale = tw9910_ntsc_scales; 433 size = ARRAY_SIZE(tw9910_ntsc_scales); 434 } else if (norm & V4L2_STD_PAL) { 435 scale = tw9910_pal_scales; 436 size = ARRAY_SIZE(tw9910_pal_scales); 437 } else { 438 return NULL; 439 } 440 441 for (i = 0; i < size; i++) { 442 tmp = abs(width - scale[i].width) + 443 abs(height - scale[i].height); 444 if (tmp < diff) { 445 diff = tmp; 446 ret = scale + i; 447 } 448 } 449 450 return ret; 451 } 452 453 /* 454 * subdevice operations 455 */ 456 static int tw9910_s_stream(struct v4l2_subdev *sd, int enable) 457 { 458 struct i2c_client *client = v4l2_get_subdevdata(sd); 459 struct tw9910_priv *priv = to_tw9910(client); 460 u8 val; 461 int ret; 462 463 if (!enable) { 464 switch (priv->revision) { 465 case 0: 466 val = OEN_TRI_SEL_ALL_OFF_r0; 467 break; 468 case 1: 469 val = OEN_TRI_SEL_ALL_OFF_r1; 470 break; 471 default: 472 dev_err(&client->dev, "un-supported revision\n"); 473 return -EINVAL; 474 } 475 } else { 476 val = OEN_TRI_SEL_ALL_ON; 477 478 if (!priv->scale) { 479 dev_err(&client->dev, "norm select error\n"); 480 return -EPERM; 481 } 482 483 dev_dbg(&client->dev, "%s %dx%d\n", 484 priv->scale->name, 485 priv->scale->width, 486 priv->scale->height); 487 } 488 489 ret = tw9910_mask_set(client, OPFORM, OEN_TRI_SEL_MASK, val); 490 if (ret < 0) 491 return ret; 492 493 return tw9910_power(client, enable); 494 } 495 496 static int tw9910_g_std(struct v4l2_subdev *sd, v4l2_std_id *norm) 497 { 498 struct i2c_client *client = v4l2_get_subdevdata(sd); 499 struct tw9910_priv *priv = to_tw9910(client); 500 501 *norm = priv->norm; 502 503 return 0; 504 } 505 506 static int tw9910_s_std(struct v4l2_subdev *sd, v4l2_std_id norm) 507 { 508 struct i2c_client *client = v4l2_get_subdevdata(sd); 509 struct tw9910_priv *priv = to_tw9910(client); 510 const unsigned int hact = 720; 511 const unsigned int hdelay = 15; 512 unsigned int vact; 513 unsigned int vdelay; 514 int ret; 515 516 if (!(norm & (V4L2_STD_NTSC | V4L2_STD_PAL))) 517 return -EINVAL; 518 519 priv->norm = norm; 520 if (norm & V4L2_STD_525_60) { 521 vact = 240; 522 vdelay = 18; 523 ret = tw9910_mask_set(client, VVBI, 0x10, 0x10); 524 } else { 525 vact = 288; 526 vdelay = 24; 527 ret = tw9910_mask_set(client, VVBI, 0x10, 0x00); 528 } 529 if (!ret) 530 ret = i2c_smbus_write_byte_data(client, CROP_HI, 531 ((vdelay >> 2) & 0xc0) | 532 ((vact >> 4) & 0x30) | 533 ((hdelay >> 6) & 0x0c) | 534 ((hact >> 8) & 0x03)); 535 if (!ret) 536 ret = i2c_smbus_write_byte_data(client, VDELAY_LO, 537 vdelay & 0xff); 538 if (!ret) 539 ret = i2c_smbus_write_byte_data(client, VACTIVE_LO, 540 vact & 0xff); 541 542 return ret; 543 } 544 545 #ifdef CONFIG_VIDEO_ADV_DEBUG 546 static int tw9910_g_register(struct v4l2_subdev *sd, 547 struct v4l2_dbg_register *reg) 548 { 549 struct i2c_client *client = v4l2_get_subdevdata(sd); 550 int ret; 551 552 if (reg->reg > 0xff) 553 return -EINVAL; 554 555 reg->size = 1; 556 ret = i2c_smbus_read_byte_data(client, reg->reg); 557 if (ret < 0) 558 return ret; 559 560 /* 561 * ret = int 562 * reg->val = __u64 563 */ 564 reg->val = (__u64)ret; 565 566 return 0; 567 } 568 569 static int tw9910_s_register(struct v4l2_subdev *sd, 570 const struct v4l2_dbg_register *reg) 571 { 572 struct i2c_client *client = v4l2_get_subdevdata(sd); 573 574 if (reg->reg > 0xff || 575 reg->val > 0xff) 576 return -EINVAL; 577 578 return i2c_smbus_write_byte_data(client, reg->reg, reg->val); 579 } 580 #endif 581 582 static void tw9910_set_gpio_value(struct gpio_desc *desc, int value) 583 { 584 if (desc) { 585 gpiod_set_value(desc, value); 586 usleep_range(500, 1000); 587 } 588 } 589 590 static int tw9910_power_on(struct tw9910_priv *priv) 591 { 592 struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev); 593 int ret; 594 595 if (priv->clk) { 596 ret = clk_prepare_enable(priv->clk); 597 if (ret) 598 return ret; 599 } 600 601 tw9910_set_gpio_value(priv->pdn_gpio, 0); 602 603 /* 604 * FIXME: The reset signal is connected to a shared GPIO on some 605 * platforms (namely the SuperH Migo-R). Until a framework becomes 606 * available to handle this cleanly, request the GPIO temporarily 607 * to avoid conflicts. 608 */ 609 priv->rstb_gpio = gpiod_get_optional(&client->dev, "rstb", 610 GPIOD_OUT_LOW); 611 if (IS_ERR(priv->rstb_gpio)) { 612 dev_info(&client->dev, "Unable to get GPIO \"rstb\""); 613 clk_disable_unprepare(priv->clk); 614 tw9910_set_gpio_value(priv->pdn_gpio, 1); 615 return PTR_ERR(priv->rstb_gpio); 616 } 617 618 if (priv->rstb_gpio) { 619 tw9910_set_gpio_value(priv->rstb_gpio, 1); 620 tw9910_set_gpio_value(priv->rstb_gpio, 0); 621 622 gpiod_put(priv->rstb_gpio); 623 } 624 625 return 0; 626 } 627 628 static int tw9910_power_off(struct tw9910_priv *priv) 629 { 630 clk_disable_unprepare(priv->clk); 631 tw9910_set_gpio_value(priv->pdn_gpio, 1); 632 633 return 0; 634 } 635 636 static int tw9910_s_power(struct v4l2_subdev *sd, int on) 637 { 638 struct i2c_client *client = v4l2_get_subdevdata(sd); 639 struct tw9910_priv *priv = to_tw9910(client); 640 641 return on ? tw9910_power_on(priv) : tw9910_power_off(priv); 642 } 643 644 static int tw9910_set_frame(struct v4l2_subdev *sd, u32 *width, u32 *height) 645 { 646 struct i2c_client *client = v4l2_get_subdevdata(sd); 647 struct tw9910_priv *priv = to_tw9910(client); 648 int ret = -EINVAL; 649 u8 val; 650 651 /* Select suitable norm. */ 652 priv->scale = tw9910_select_norm(priv->norm, *width, *height); 653 if (!priv->scale) 654 goto tw9910_set_fmt_error; 655 656 /* Reset hardware. */ 657 tw9910_reset(client); 658 659 /* Set bus width. */ 660 val = 0x00; 661 if (priv->info->buswidth == 16) 662 val = LEN; 663 664 ret = tw9910_mask_set(client, OPFORM, LEN, val); 665 if (ret < 0) 666 goto tw9910_set_fmt_error; 667 668 /* Select MPOUT behavior. */ 669 switch (priv->info->mpout) { 670 case TW9910_MPO_VLOSS: 671 val = RTSEL_VLOSS; break; 672 case TW9910_MPO_HLOCK: 673 val = RTSEL_HLOCK; break; 674 case TW9910_MPO_SLOCK: 675 val = RTSEL_SLOCK; break; 676 case TW9910_MPO_VLOCK: 677 val = RTSEL_VLOCK; break; 678 case TW9910_MPO_MONO: 679 val = RTSEL_MONO; break; 680 case TW9910_MPO_DET50: 681 val = RTSEL_DET50; break; 682 case TW9910_MPO_FIELD: 683 val = RTSEL_FIELD; break; 684 case TW9910_MPO_RTCO: 685 val = RTSEL_RTCO; break; 686 default: 687 val = 0; 688 } 689 690 ret = tw9910_mask_set(client, VBICNTL, RTSEL_MASK, val); 691 if (ret < 0) 692 goto tw9910_set_fmt_error; 693 694 /* Set scale. */ 695 ret = tw9910_set_scale(client, priv->scale); 696 if (ret < 0) 697 goto tw9910_set_fmt_error; 698 699 /* Set hsync. */ 700 ret = tw9910_set_hsync(client); 701 if (ret < 0) 702 goto tw9910_set_fmt_error; 703 704 *width = priv->scale->width; 705 *height = priv->scale->height; 706 707 return ret; 708 709 tw9910_set_fmt_error: 710 711 tw9910_reset(client); 712 priv->scale = NULL; 713 714 return ret; 715 } 716 717 static int tw9910_get_selection(struct v4l2_subdev *sd, 718 struct v4l2_subdev_state *sd_state, 719 struct v4l2_subdev_selection *sel) 720 { 721 struct i2c_client *client = v4l2_get_subdevdata(sd); 722 struct tw9910_priv *priv = to_tw9910(client); 723 724 if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE) 725 return -EINVAL; 726 /* Only CROP, CROP_DEFAULT and CROP_BOUNDS are supported. */ 727 if (sel->target > V4L2_SEL_TGT_CROP_BOUNDS) 728 return -EINVAL; 729 730 sel->r.left = 0; 731 sel->r.top = 0; 732 if (priv->norm & V4L2_STD_NTSC) { 733 sel->r.width = 640; 734 sel->r.height = 480; 735 } else { 736 sel->r.width = 768; 737 sel->r.height = 576; 738 } 739 740 return 0; 741 } 742 743 static int tw9910_get_fmt(struct v4l2_subdev *sd, 744 struct v4l2_subdev_state *sd_state, 745 struct v4l2_subdev_format *format) 746 { 747 struct v4l2_mbus_framefmt *mf = &format->format; 748 struct i2c_client *client = v4l2_get_subdevdata(sd); 749 struct tw9910_priv *priv = to_tw9910(client); 750 751 if (format->pad) 752 return -EINVAL; 753 754 if (!priv->scale) { 755 priv->scale = tw9910_select_norm(priv->norm, 640, 480); 756 if (!priv->scale) 757 return -EINVAL; 758 } 759 760 mf->width = priv->scale->width; 761 mf->height = priv->scale->height; 762 mf->code = MEDIA_BUS_FMT_UYVY8_2X8; 763 mf->colorspace = V4L2_COLORSPACE_SMPTE170M; 764 mf->field = V4L2_FIELD_INTERLACED_BT; 765 766 return 0; 767 } 768 769 static int tw9910_s_fmt(struct v4l2_subdev *sd, 770 struct v4l2_mbus_framefmt *mf) 771 { 772 u32 width = mf->width, height = mf->height; 773 int ret; 774 775 WARN_ON(mf->field != V4L2_FIELD_ANY && 776 mf->field != V4L2_FIELD_INTERLACED_BT); 777 778 /* Check color format. */ 779 if (mf->code != MEDIA_BUS_FMT_UYVY8_2X8) 780 return -EINVAL; 781 782 mf->colorspace = V4L2_COLORSPACE_SMPTE170M; 783 784 ret = tw9910_set_frame(sd, &width, &height); 785 if (ret) 786 return ret; 787 788 mf->width = width; 789 mf->height = height; 790 791 return 0; 792 } 793 794 static int tw9910_set_fmt(struct v4l2_subdev *sd, 795 struct v4l2_subdev_state *sd_state, 796 struct v4l2_subdev_format *format) 797 { 798 struct v4l2_mbus_framefmt *mf = &format->format; 799 struct i2c_client *client = v4l2_get_subdevdata(sd); 800 struct tw9910_priv *priv = to_tw9910(client); 801 const struct tw9910_scale_ctrl *scale; 802 803 if (format->pad) 804 return -EINVAL; 805 806 if (mf->field == V4L2_FIELD_ANY) { 807 mf->field = V4L2_FIELD_INTERLACED_BT; 808 } else if (mf->field != V4L2_FIELD_INTERLACED_BT) { 809 dev_err(&client->dev, "Field type %d invalid\n", mf->field); 810 return -EINVAL; 811 } 812 813 mf->code = MEDIA_BUS_FMT_UYVY8_2X8; 814 mf->colorspace = V4L2_COLORSPACE_SMPTE170M; 815 816 /* Select suitable norm. */ 817 scale = tw9910_select_norm(priv->norm, mf->width, mf->height); 818 if (!scale) 819 return -EINVAL; 820 821 mf->width = scale->width; 822 mf->height = scale->height; 823 824 if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) 825 return tw9910_s_fmt(sd, mf); 826 827 return 0; 828 } 829 830 static int tw9910_video_probe(struct i2c_client *client) 831 { 832 struct tw9910_priv *priv = to_tw9910(client); 833 s32 id; 834 int ret; 835 836 /* TW9910 only use 8 or 16 bit bus width. */ 837 if (priv->info->buswidth != 16 && priv->info->buswidth != 8) { 838 dev_err(&client->dev, "bus width error\n"); 839 return -ENODEV; 840 } 841 842 ret = tw9910_s_power(&priv->subdev, 1); 843 if (ret < 0) 844 return ret; 845 846 /* 847 * Check and show Product ID. 848 * So far only revisions 0 and 1 have been seen. 849 */ 850 id = i2c_smbus_read_byte_data(client, ID); 851 priv->revision = GET_REV(id); 852 id = GET_ID(id); 853 854 if (id != 0x0b || priv->revision > 0x01) { 855 dev_err(&client->dev, "Product ID error %x:%x\n", 856 id, priv->revision); 857 ret = -ENODEV; 858 goto done; 859 } 860 861 dev_info(&client->dev, "tw9910 Product ID %0x:%0x\n", 862 id, priv->revision); 863 864 priv->norm = V4L2_STD_NTSC; 865 priv->scale = &tw9910_ntsc_scales[0]; 866 867 done: 868 tw9910_s_power(&priv->subdev, 0); 869 870 return ret; 871 } 872 873 static const struct v4l2_subdev_core_ops tw9910_subdev_core_ops = { 874 #ifdef CONFIG_VIDEO_ADV_DEBUG 875 .g_register = tw9910_g_register, 876 .s_register = tw9910_s_register, 877 #endif 878 .s_power = tw9910_s_power, 879 }; 880 881 static int tw9910_enum_mbus_code(struct v4l2_subdev *sd, 882 struct v4l2_subdev_state *sd_state, 883 struct v4l2_subdev_mbus_code_enum *code) 884 { 885 if (code->pad || code->index) 886 return -EINVAL; 887 888 code->code = MEDIA_BUS_FMT_UYVY8_2X8; 889 890 return 0; 891 } 892 893 static int tw9910_g_tvnorms(struct v4l2_subdev *sd, v4l2_std_id *norm) 894 { 895 *norm = V4L2_STD_NTSC | V4L2_STD_PAL; 896 897 return 0; 898 } 899 900 static const struct v4l2_subdev_video_ops tw9910_subdev_video_ops = { 901 .s_std = tw9910_s_std, 902 .g_std = tw9910_g_std, 903 .s_stream = tw9910_s_stream, 904 .g_tvnorms = tw9910_g_tvnorms, 905 }; 906 907 static const struct v4l2_subdev_pad_ops tw9910_subdev_pad_ops = { 908 .enum_mbus_code = tw9910_enum_mbus_code, 909 .get_selection = tw9910_get_selection, 910 .get_fmt = tw9910_get_fmt, 911 .set_fmt = tw9910_set_fmt, 912 }; 913 914 static const struct v4l2_subdev_ops tw9910_subdev_ops = { 915 .core = &tw9910_subdev_core_ops, 916 .video = &tw9910_subdev_video_ops, 917 .pad = &tw9910_subdev_pad_ops, 918 }; 919 920 /* 921 * i2c_driver function 922 */ 923 924 static int tw9910_probe(struct i2c_client *client) 925 926 { 927 struct tw9910_priv *priv; 928 struct tw9910_video_info *info; 929 struct i2c_adapter *adapter = client->adapter; 930 int ret; 931 932 if (!client->dev.platform_data) { 933 dev_err(&client->dev, "TW9910: missing platform data!\n"); 934 return -EINVAL; 935 } 936 937 info = client->dev.platform_data; 938 939 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { 940 dev_err(&client->dev, 941 "I2C-Adapter doesn't support I2C_FUNC_SMBUS_BYTE_DATA\n"); 942 return -EIO; 943 } 944 945 priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); 946 if (!priv) 947 return -ENOMEM; 948 949 priv->info = info; 950 951 v4l2_i2c_subdev_init(&priv->subdev, client, &tw9910_subdev_ops); 952 953 priv->clk = clk_get(&client->dev, "xti"); 954 if (PTR_ERR(priv->clk) == -ENOENT) { 955 priv->clk = NULL; 956 } else if (IS_ERR(priv->clk)) { 957 dev_err(&client->dev, "Unable to get xti clock\n"); 958 return PTR_ERR(priv->clk); 959 } 960 961 priv->pdn_gpio = gpiod_get_optional(&client->dev, "pdn", 962 GPIOD_OUT_HIGH); 963 if (IS_ERR(priv->pdn_gpio)) { 964 dev_info(&client->dev, "Unable to get GPIO \"pdn\""); 965 ret = PTR_ERR(priv->pdn_gpio); 966 goto error_clk_put; 967 } 968 969 ret = tw9910_video_probe(client); 970 if (ret < 0) 971 goto error_gpio_put; 972 973 ret = v4l2_async_register_subdev(&priv->subdev); 974 if (ret) 975 goto error_gpio_put; 976 977 return ret; 978 979 error_gpio_put: 980 if (priv->pdn_gpio) 981 gpiod_put(priv->pdn_gpio); 982 error_clk_put: 983 clk_put(priv->clk); 984 985 return ret; 986 } 987 988 static void tw9910_remove(struct i2c_client *client) 989 { 990 struct tw9910_priv *priv = to_tw9910(client); 991 992 if (priv->pdn_gpio) 993 gpiod_put(priv->pdn_gpio); 994 clk_put(priv->clk); 995 v4l2_async_unregister_subdev(&priv->subdev); 996 } 997 998 static const struct i2c_device_id tw9910_id[] = { 999 { "tw9910" }, 1000 { } 1001 }; 1002 MODULE_DEVICE_TABLE(i2c, tw9910_id); 1003 1004 static struct i2c_driver tw9910_i2c_driver = { 1005 .driver = { 1006 .name = "tw9910", 1007 }, 1008 .probe = tw9910_probe, 1009 .remove = tw9910_remove, 1010 .id_table = tw9910_id, 1011 }; 1012 1013 module_i2c_driver(tw9910_i2c_driver); 1014 1015 MODULE_DESCRIPTION("V4L2 driver for TW9910 video decoder"); 1016 MODULE_AUTHOR("Kuninori Morimoto"); 1017 MODULE_LICENSE("GPL v2"); 1018