1 /* saa711x - Philips SAA711x video decoder driver 2 * This driver can work with saa7111, saa7111a, saa7113, saa7114, 3 * saa7115 and saa7118. 4 * 5 * Based on saa7114 driver by Maxim Yevtyushkin, which is based on 6 * the saa7111 driver by Dave Perks. 7 * 8 * Copyright (C) 1998 Dave Perks <dperks@ibm.net> 9 * Copyright (C) 2002 Maxim Yevtyushkin <max@linuxmedialabs.com> 10 * 11 * Slight changes for video timing and attachment output by 12 * Wolfgang Scherr <scherr@net4you.net> 13 * 14 * Moved over to the linux >= 2.4.x i2c protocol (1/1/2003) 15 * by Ronald Bultje <rbultje@ronald.bitfreak.net> 16 * 17 * Added saa7115 support by Kevin Thayer <nufan_wfk at yahoo.com> 18 * (2/17/2003) 19 * 20 * VBI support (2004) and cleanups (2005) by Hans Verkuil <hverkuil@xs4all.nl> 21 * 22 * Copyright (c) 2005-2006 Mauro Carvalho Chehab <mchehab@infradead.org> 23 * SAA7111, SAA7113 and SAA7118 support 24 * 25 * This program is free software; you can redistribute it and/or 26 * modify it under the terms of the GNU General Public License 27 * as published by the Free Software Foundation; either version 2 28 * of the License, or (at your option) any later version. 29 * 30 * This program is distributed in the hope that it will be useful, 31 * but WITHOUT ANY WARRANTY; without even the implied warranty of 32 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 33 * GNU General Public License for more details. 34 */ 35 36 #include "saa711x_regs.h" 37 38 #include <linux/kernel.h> 39 #include <linux/module.h> 40 #include <linux/slab.h> 41 #include <linux/i2c.h> 42 #include <linux/videodev2.h> 43 #include <media/v4l2-device.h> 44 #include <media/v4l2-ctrls.h> 45 #include <media/v4l2-mc.h> 46 #include <media/i2c/saa7115.h> 47 #include <asm/div64.h> 48 49 #define VRES_60HZ (480+16) 50 51 MODULE_DESCRIPTION("Philips SAA7111/SAA7113/SAA7114/SAA7115/SAA7118 video decoder driver"); 52 MODULE_AUTHOR( "Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, " 53 "Hans Verkuil, Mauro Carvalho Chehab"); 54 MODULE_LICENSE("GPL"); 55 56 static bool debug; 57 module_param(debug, bool, 0644); 58 59 MODULE_PARM_DESC(debug, "Debug level (0-1)"); 60 61 62 enum saa711x_model { 63 SAA7111A, 64 SAA7111, 65 SAA7113, 66 GM7113C, 67 SAA7114, 68 SAA7115, 69 SAA7118, 70 }; 71 72 struct saa711x_state { 73 struct v4l2_subdev sd; 74 #ifdef CONFIG_MEDIA_CONTROLLER 75 struct media_pad pads[DEMOD_NUM_PADS]; 76 #endif 77 struct v4l2_ctrl_handler hdl; 78 79 struct { 80 /* chroma gain control cluster */ 81 struct v4l2_ctrl *agc; 82 struct v4l2_ctrl *gain; 83 }; 84 85 v4l2_std_id std; 86 int input; 87 int output; 88 int enable; 89 int radio; 90 int width; 91 int height; 92 enum saa711x_model ident; 93 u32 audclk_freq; 94 u32 crystal_freq; 95 bool ucgc; 96 u8 cgcdiv; 97 bool apll; 98 bool double_asclk; 99 }; 100 101 static inline struct saa711x_state *to_state(struct v4l2_subdev *sd) 102 { 103 return container_of(sd, struct saa711x_state, sd); 104 } 105 106 static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) 107 { 108 return &container_of(ctrl->handler, struct saa711x_state, hdl)->sd; 109 } 110 111 /* ----------------------------------------------------------------------- */ 112 113 static inline int saa711x_write(struct v4l2_subdev *sd, u8 reg, u8 value) 114 { 115 struct i2c_client *client = v4l2_get_subdevdata(sd); 116 117 return i2c_smbus_write_byte_data(client, reg, value); 118 } 119 120 /* Sanity routine to check if a register is present */ 121 static int saa711x_has_reg(const int id, const u8 reg) 122 { 123 if (id == SAA7111) 124 return reg < 0x20 && reg != 0x01 && reg != 0x0f && 125 (reg < 0x13 || reg > 0x19) && reg != 0x1d && reg != 0x1e; 126 if (id == SAA7111A) 127 return reg < 0x20 && reg != 0x01 && reg != 0x0f && 128 reg != 0x14 && reg != 0x18 && reg != 0x19 && 129 reg != 0x1d && reg != 0x1e; 130 131 /* common for saa7113/4/5/8 */ 132 if (unlikely((reg >= 0x3b && reg <= 0x3f) || reg == 0x5c || reg == 0x5f || 133 reg == 0xa3 || reg == 0xa7 || reg == 0xab || reg == 0xaf || (reg >= 0xb5 && reg <= 0xb7) || 134 reg == 0xd3 || reg == 0xd7 || reg == 0xdb || reg == 0xdf || (reg >= 0xe5 && reg <= 0xe7) || 135 reg == 0x82 || (reg >= 0x89 && reg <= 0x8e))) 136 return 0; 137 138 switch (id) { 139 case GM7113C: 140 return reg != 0x14 && (reg < 0x18 || reg > 0x1e) && reg < 0x20; 141 case SAA7113: 142 return reg != 0x14 && (reg < 0x18 || reg > 0x1e) && (reg < 0x20 || reg > 0x3f) && 143 reg != 0x5d && reg < 0x63; 144 case SAA7114: 145 return (reg < 0x1a || reg > 0x1e) && (reg < 0x20 || reg > 0x2f) && 146 (reg < 0x63 || reg > 0x7f) && reg != 0x33 && reg != 0x37 && 147 reg != 0x81 && reg < 0xf0; 148 case SAA7115: 149 return (reg < 0x20 || reg > 0x2f) && reg != 0x65 && (reg < 0xfc || reg > 0xfe); 150 case SAA7118: 151 return (reg < 0x1a || reg > 0x1d) && (reg < 0x20 || reg > 0x22) && 152 (reg < 0x26 || reg > 0x28) && reg != 0x33 && reg != 0x37 && 153 (reg < 0x63 || reg > 0x7f) && reg != 0x81 && reg < 0xf0; 154 } 155 return 1; 156 } 157 158 static int saa711x_writeregs(struct v4l2_subdev *sd, const unsigned char *regs) 159 { 160 struct saa711x_state *state = to_state(sd); 161 unsigned char reg, data; 162 163 while (*regs != 0x00) { 164 reg = *(regs++); 165 data = *(regs++); 166 167 /* According with datasheets, reserved regs should be 168 filled with 0 - seems better not to touch on they */ 169 if (saa711x_has_reg(state->ident, reg)) { 170 if (saa711x_write(sd, reg, data) < 0) 171 return -1; 172 } else { 173 v4l2_dbg(1, debug, sd, "tried to access reserved reg 0x%02x\n", reg); 174 } 175 } 176 return 0; 177 } 178 179 static inline int saa711x_read(struct v4l2_subdev *sd, u8 reg) 180 { 181 struct i2c_client *client = v4l2_get_subdevdata(sd); 182 183 return i2c_smbus_read_byte_data(client, reg); 184 } 185 186 /* ----------------------------------------------------------------------- */ 187 188 /* SAA7111 initialization table */ 189 static const unsigned char saa7111_init[] = { 190 R_01_INC_DELAY, 0x00, /* reserved */ 191 192 /*front end */ 193 R_02_INPUT_CNTL_1, 0xd0, /* FUSE=3, GUDL=2, MODE=0 */ 194 R_03_INPUT_CNTL_2, 0x23, /* HLNRS=0, VBSL=1, WPOFF=0, HOLDG=0, 195 * GAFIX=0, GAI1=256, GAI2=256 */ 196 R_04_INPUT_CNTL_3, 0x00, /* GAI1=256 */ 197 R_05_INPUT_CNTL_4, 0x00, /* GAI2=256 */ 198 199 /* decoder */ 200 R_06_H_SYNC_START, 0xf3, /* HSB at 13(50Hz) / 17(60Hz) 201 * pixels after end of last line */ 202 R_07_H_SYNC_STOP, 0xe8, /* HSS seems to be needed to 203 * work with NTSC, too */ 204 R_08_SYNC_CNTL, 0xc8, /* AUFD=1, FSEL=1, EXFIL=0, 205 * VTRC=1, HPLL=0, VNOI=0 */ 206 R_09_LUMA_CNTL, 0x01, /* BYPS=0, PREF=0, BPSS=0, 207 * VBLB=0, UPTCV=0, APER=1 */ 208 R_0A_LUMA_BRIGHT_CNTL, 0x80, 209 R_0B_LUMA_CONTRAST_CNTL, 0x47, /* 0b - CONT=1.109 */ 210 R_0C_CHROMA_SAT_CNTL, 0x40, 211 R_0D_CHROMA_HUE_CNTL, 0x00, 212 R_0E_CHROMA_CNTL_1, 0x01, /* 0e - CDTO=0, CSTD=0, DCCF=0, 213 * FCTC=0, CHBW=1 */ 214 R_0F_CHROMA_GAIN_CNTL, 0x00, /* reserved */ 215 R_10_CHROMA_CNTL_2, 0x48, /* 10 - OFTS=1, HDEL=0, VRLN=1, YDEL=0 */ 216 R_11_MODE_DELAY_CNTL, 0x1c, /* 11 - GPSW=0, CM99=0, FECO=0, COMPO=1, 217 * OEYC=1, OEHV=1, VIPB=0, COLO=0 */ 218 R_12_RT_SIGNAL_CNTL, 0x00, /* 12 - output control 2 */ 219 R_13_RT_X_PORT_OUT_CNTL, 0x00, /* 13 - output control 3 */ 220 R_14_ANAL_ADC_COMPAT_CNTL, 0x00, 221 R_15_VGATE_START_FID_CHG, 0x00, 222 R_16_VGATE_STOP, 0x00, 223 R_17_MISC_VGATE_CONF_AND_MSB, 0x00, 224 225 0x00, 0x00 226 }; 227 228 /* 229 * This table has one illegal value, and some values that are not 230 * correct according to the datasheet initialization table. 231 * 232 * If you need a table with legal/default values tell the driver in 233 * i2c_board_info.platform_data, and you will get the gm7113c_init 234 * table instead. 235 */ 236 237 /* SAA7113 Init codes */ 238 static const unsigned char saa7113_init[] = { 239 R_01_INC_DELAY, 0x08, 240 R_02_INPUT_CNTL_1, 0xc2, 241 R_03_INPUT_CNTL_2, 0x30, 242 R_04_INPUT_CNTL_3, 0x00, 243 R_05_INPUT_CNTL_4, 0x00, 244 R_06_H_SYNC_START, 0x89, /* Illegal value -119, 245 * min. value = -108 (0x94) */ 246 R_07_H_SYNC_STOP, 0x0d, 247 R_08_SYNC_CNTL, 0x88, /* Not datasheet default. 248 * HTC = VTR mode, should be 0x98 */ 249 R_09_LUMA_CNTL, 0x01, 250 R_0A_LUMA_BRIGHT_CNTL, 0x80, 251 R_0B_LUMA_CONTRAST_CNTL, 0x47, 252 R_0C_CHROMA_SAT_CNTL, 0x40, 253 R_0D_CHROMA_HUE_CNTL, 0x00, 254 R_0E_CHROMA_CNTL_1, 0x01, 255 R_0F_CHROMA_GAIN_CNTL, 0x2a, 256 R_10_CHROMA_CNTL_2, 0x08, /* Not datsheet default. 257 * VRLN enabled, should be 0x00 */ 258 R_11_MODE_DELAY_CNTL, 0x0c, 259 R_12_RT_SIGNAL_CNTL, 0x07, /* Not datasheet default, 260 * should be 0x01 */ 261 R_13_RT_X_PORT_OUT_CNTL, 0x00, 262 R_14_ANAL_ADC_COMPAT_CNTL, 0x00, 263 R_15_VGATE_START_FID_CHG, 0x00, 264 R_16_VGATE_STOP, 0x00, 265 R_17_MISC_VGATE_CONF_AND_MSB, 0x00, 266 267 0x00, 0x00 268 }; 269 270 /* 271 * GM7113C is a clone of the SAA7113 chip 272 * This init table is copied out of the saa7113 datasheet. 273 * In R_08 we enable "Automatic Field Detection" [AUFD], 274 * this is disabled when saa711x_set_v4lstd is called. 275 */ 276 static const unsigned char gm7113c_init[] = { 277 R_01_INC_DELAY, 0x08, 278 R_02_INPUT_CNTL_1, 0xc0, 279 R_03_INPUT_CNTL_2, 0x33, 280 R_04_INPUT_CNTL_3, 0x00, 281 R_05_INPUT_CNTL_4, 0x00, 282 R_06_H_SYNC_START, 0xe9, 283 R_07_H_SYNC_STOP, 0x0d, 284 R_08_SYNC_CNTL, 0x98, 285 R_09_LUMA_CNTL, 0x01, 286 R_0A_LUMA_BRIGHT_CNTL, 0x80, 287 R_0B_LUMA_CONTRAST_CNTL, 0x47, 288 R_0C_CHROMA_SAT_CNTL, 0x40, 289 R_0D_CHROMA_HUE_CNTL, 0x00, 290 R_0E_CHROMA_CNTL_1, 0x01, 291 R_0F_CHROMA_GAIN_CNTL, 0x2a, 292 R_10_CHROMA_CNTL_2, 0x00, 293 R_11_MODE_DELAY_CNTL, 0x0c, 294 R_12_RT_SIGNAL_CNTL, 0x01, 295 R_13_RT_X_PORT_OUT_CNTL, 0x00, 296 R_14_ANAL_ADC_COMPAT_CNTL, 0x00, 297 R_15_VGATE_START_FID_CHG, 0x00, 298 R_16_VGATE_STOP, 0x00, 299 R_17_MISC_VGATE_CONF_AND_MSB, 0x00, 300 301 0x00, 0x00 302 }; 303 304 /* If a value differs from the Hauppauge driver values, then the comment starts with 305 'was 0xXX' to denote the Hauppauge value. Otherwise the value is identical to what the 306 Hauppauge driver sets. */ 307 308 /* SAA7114 and SAA7115 initialization table */ 309 static const unsigned char saa7115_init_auto_input[] = { 310 /* Front-End Part */ 311 R_01_INC_DELAY, 0x48, /* white peak control disabled */ 312 R_03_INPUT_CNTL_2, 0x20, /* was 0x30. 0x20: long vertical blanking */ 313 R_04_INPUT_CNTL_3, 0x90, /* analog gain set to 0 */ 314 R_05_INPUT_CNTL_4, 0x90, /* analog gain set to 0 */ 315 /* Decoder Part */ 316 R_06_H_SYNC_START, 0xeb, /* horiz sync begin = -21 */ 317 R_07_H_SYNC_STOP, 0xe0, /* horiz sync stop = -17 */ 318 R_09_LUMA_CNTL, 0x53, /* 0x53, was 0x56 for 60hz. luminance control */ 319 R_0A_LUMA_BRIGHT_CNTL, 0x80, /* was 0x88. decoder brightness, 0x80 is itu standard */ 320 R_0B_LUMA_CONTRAST_CNTL, 0x44, /* was 0x48. decoder contrast, 0x44 is itu standard */ 321 R_0C_CHROMA_SAT_CNTL, 0x40, /* was 0x47. decoder saturation, 0x40 is itu standard */ 322 R_0D_CHROMA_HUE_CNTL, 0x00, 323 R_0F_CHROMA_GAIN_CNTL, 0x00, /* use automatic gain */ 324 R_10_CHROMA_CNTL_2, 0x06, /* chroma: active adaptive combfilter */ 325 R_11_MODE_DELAY_CNTL, 0x00, 326 R_12_RT_SIGNAL_CNTL, 0x9d, /* RTS0 output control: VGATE */ 327 R_13_RT_X_PORT_OUT_CNTL, 0x80, /* ITU656 standard mode, RTCO output enable RTCE */ 328 R_14_ANAL_ADC_COMPAT_CNTL, 0x00, 329 R_18_RAW_DATA_GAIN_CNTL, 0x40, /* gain 0x00 = nominal */ 330 R_19_RAW_DATA_OFF_CNTL, 0x80, 331 R_1A_COLOR_KILL_LVL_CNTL, 0x77, /* recommended value */ 332 R_1B_MISC_TVVCRDET, 0x42, /* recommended value */ 333 R_1C_ENHAN_COMB_CTRL1, 0xa9, /* recommended value */ 334 R_1D_ENHAN_COMB_CTRL2, 0x01, /* recommended value */ 335 336 337 R_80_GLOBAL_CNTL_1, 0x0, /* No tasks enabled at init */ 338 339 /* Power Device Control */ 340 R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset device */ 341 R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* set device programmed, all in operational mode */ 342 0x00, 0x00 343 }; 344 345 /* Used to reset saa7113, saa7114 and saa7115 */ 346 static const unsigned char saa7115_cfg_reset_scaler[] = { 347 R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x00, /* disable I-port output */ 348 R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ 349 R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */ 350 R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* enable I-port output */ 351 0x00, 0x00 352 }; 353 354 /* ============== SAA7715 VIDEO templates ============= */ 355 356 static const unsigned char saa7115_cfg_60hz_video[] = { 357 R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */ 358 R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ 359 360 R_15_VGATE_START_FID_CHG, 0x03, 361 R_16_VGATE_STOP, 0x11, 362 R_17_MISC_VGATE_CONF_AND_MSB, 0x9c, 363 364 R_08_SYNC_CNTL, 0x68, /* 0xBO: auto detection, 0x68 = NTSC */ 365 R_0E_CHROMA_CNTL_1, 0x07, /* video autodetection is on */ 366 367 R_5A_V_OFF_FOR_SLICER, 0x06, /* standard 60hz value for ITU656 line counting */ 368 369 /* Task A */ 370 R_90_A_TASK_HANDLING_CNTL, 0x80, 371 R_91_A_X_PORT_FORMATS_AND_CONF, 0x48, 372 R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL, 0x40, 373 R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF, 0x84, 374 375 /* hoffset low (input), 0x0002 is minimum */ 376 R_94_A_HORIZ_INPUT_WINDOW_START, 0x01, 377 R_95_A_HORIZ_INPUT_WINDOW_START_MSB, 0x00, 378 379 /* hsize low (input), 0x02d0 = 720 */ 380 R_96_A_HORIZ_INPUT_WINDOW_LENGTH, 0xd0, 381 R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02, 382 383 R_98_A_VERT_INPUT_WINDOW_START, 0x05, 384 R_99_A_VERT_INPUT_WINDOW_START_MSB, 0x00, 385 386 R_9A_A_VERT_INPUT_WINDOW_LENGTH, 0x0c, 387 R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB, 0x00, 388 389 R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH, 0xa0, 390 R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x05, 391 392 R_9E_A_VERT_OUTPUT_WINDOW_LENGTH, 0x0c, 393 R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x00, 394 395 /* Task B */ 396 R_C0_B_TASK_HANDLING_CNTL, 0x00, 397 R_C1_B_X_PORT_FORMATS_AND_CONF, 0x08, 398 R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION, 0x00, 399 R_C3_B_I_PORT_FORMATS_AND_CONF, 0x80, 400 401 /* 0x0002 is minimum */ 402 R_C4_B_HORIZ_INPUT_WINDOW_START, 0x02, 403 R_C5_B_HORIZ_INPUT_WINDOW_START_MSB, 0x00, 404 405 /* 0x02d0 = 720 */ 406 R_C6_B_HORIZ_INPUT_WINDOW_LENGTH, 0xd0, 407 R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02, 408 409 /* vwindow start 0x12 = 18 */ 410 R_C8_B_VERT_INPUT_WINDOW_START, 0x12, 411 R_C9_B_VERT_INPUT_WINDOW_START_MSB, 0x00, 412 413 /* vwindow length 0xf8 = 248 */ 414 R_CA_B_VERT_INPUT_WINDOW_LENGTH, VRES_60HZ>>1, 415 R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, VRES_60HZ>>9, 416 417 /* hwindow 0x02d0 = 720 */ 418 R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0, 419 R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02, 420 421 R_F0_LFCO_PER_LINE, 0xad, /* Set PLL Register. 60hz 525 lines per frame, 27 MHz */ 422 R_F1_P_I_PARAM_SELECT, 0x05, /* low bit with 0xF0 */ 423 R_F5_PULSGEN_LINE_LENGTH, 0xad, 424 R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01, 425 426 0x00, 0x00 427 }; 428 429 static const unsigned char saa7115_cfg_50hz_video[] = { 430 R_80_GLOBAL_CNTL_1, 0x00, 431 R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ 432 433 R_15_VGATE_START_FID_CHG, 0x37, /* VGATE start */ 434 R_16_VGATE_STOP, 0x16, 435 R_17_MISC_VGATE_CONF_AND_MSB, 0x99, 436 437 R_08_SYNC_CNTL, 0x28, /* 0x28 = PAL */ 438 R_0E_CHROMA_CNTL_1, 0x07, 439 440 R_5A_V_OFF_FOR_SLICER, 0x03, /* standard 50hz value */ 441 442 /* Task A */ 443 R_90_A_TASK_HANDLING_CNTL, 0x81, 444 R_91_A_X_PORT_FORMATS_AND_CONF, 0x48, 445 R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL, 0x40, 446 R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF, 0x84, 447 448 /* This is weird: the datasheet says that you should use 2 as the minimum value, */ 449 /* but Hauppauge uses 0, and changing that to 2 causes indeed problems (for 50hz) */ 450 /* hoffset low (input), 0x0002 is minimum */ 451 R_94_A_HORIZ_INPUT_WINDOW_START, 0x00, 452 R_95_A_HORIZ_INPUT_WINDOW_START_MSB, 0x00, 453 454 /* hsize low (input), 0x02d0 = 720 */ 455 R_96_A_HORIZ_INPUT_WINDOW_LENGTH, 0xd0, 456 R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02, 457 458 R_98_A_VERT_INPUT_WINDOW_START, 0x03, 459 R_99_A_VERT_INPUT_WINDOW_START_MSB, 0x00, 460 461 /* vsize 0x12 = 18 */ 462 R_9A_A_VERT_INPUT_WINDOW_LENGTH, 0x12, 463 R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB, 0x00, 464 465 /* hsize 0x05a0 = 1440 */ 466 R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH, 0xa0, 467 R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x05, /* hsize hi (output) */ 468 R_9E_A_VERT_OUTPUT_WINDOW_LENGTH, 0x12, /* vsize low (output), 0x12 = 18 */ 469 R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x00, /* vsize hi (output) */ 470 471 /* Task B */ 472 R_C0_B_TASK_HANDLING_CNTL, 0x00, 473 R_C1_B_X_PORT_FORMATS_AND_CONF, 0x08, 474 R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION, 0x00, 475 R_C3_B_I_PORT_FORMATS_AND_CONF, 0x80, 476 477 /* This is weird: the datasheet says that you should use 2 as the minimum value, */ 478 /* but Hauppauge uses 0, and changing that to 2 causes indeed problems (for 50hz) */ 479 /* hoffset low (input), 0x0002 is minimum. See comment above. */ 480 R_C4_B_HORIZ_INPUT_WINDOW_START, 0x00, 481 R_C5_B_HORIZ_INPUT_WINDOW_START_MSB, 0x00, 482 483 /* hsize 0x02d0 = 720 */ 484 R_C6_B_HORIZ_INPUT_WINDOW_LENGTH, 0xd0, 485 R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02, 486 487 /* voffset 0x16 = 22 */ 488 R_C8_B_VERT_INPUT_WINDOW_START, 0x16, 489 R_C9_B_VERT_INPUT_WINDOW_START_MSB, 0x00, 490 491 /* vsize 0x0120 = 288 */ 492 R_CA_B_VERT_INPUT_WINDOW_LENGTH, 0x20, 493 R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, 0x01, 494 495 /* hsize 0x02d0 = 720 */ 496 R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0, 497 R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02, 498 499 R_F0_LFCO_PER_LINE, 0xb0, /* Set PLL Register. 50hz 625 lines per frame, 27 MHz */ 500 R_F1_P_I_PARAM_SELECT, 0x05, /* low bit with 0xF0, (was 0x05) */ 501 R_F5_PULSGEN_LINE_LENGTH, 0xb0, 502 R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01, 503 504 0x00, 0x00 505 }; 506 507 /* ============== SAA7715 VIDEO templates (end) ======= */ 508 509 static const unsigned char saa7115_cfg_vbi_on[] = { 510 R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */ 511 R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ 512 R_80_GLOBAL_CNTL_1, 0x30, /* Activate both tasks */ 513 R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */ 514 R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* Enable I-port output */ 515 516 0x00, 0x00 517 }; 518 519 static const unsigned char saa7115_cfg_vbi_off[] = { 520 R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */ 521 R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ 522 R_80_GLOBAL_CNTL_1, 0x20, /* Activate only task "B" */ 523 R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */ 524 R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* Enable I-port output */ 525 526 0x00, 0x00 527 }; 528 529 530 static const unsigned char saa7115_init_misc[] = { 531 R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F, 0x01, 532 R_83_X_PORT_I_O_ENA_AND_OUT_CLK, 0x01, 533 R_84_I_PORT_SIGNAL_DEF, 0x20, 534 R_85_I_PORT_SIGNAL_POLAR, 0x21, 535 R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT, 0xc5, 536 R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, 537 538 /* Task A */ 539 R_A0_A_HORIZ_PRESCALING, 0x01, 540 R_A1_A_ACCUMULATION_LENGTH, 0x00, 541 R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER, 0x00, 542 543 /* Configure controls at nominal value*/ 544 R_A4_A_LUMA_BRIGHTNESS_CNTL, 0x80, 545 R_A5_A_LUMA_CONTRAST_CNTL, 0x40, 546 R_A6_A_CHROMA_SATURATION_CNTL, 0x40, 547 548 /* note: 2 x zoom ensures that VBI lines have same length as video lines. */ 549 R_A8_A_HORIZ_LUMA_SCALING_INC, 0x00, 550 R_A9_A_HORIZ_LUMA_SCALING_INC_MSB, 0x02, 551 552 R_AA_A_HORIZ_LUMA_PHASE_OFF, 0x00, 553 554 /* must be horiz lum scaling / 2 */ 555 R_AC_A_HORIZ_CHROMA_SCALING_INC, 0x00, 556 R_AD_A_HORIZ_CHROMA_SCALING_INC_MSB, 0x01, 557 558 /* must be offset luma / 2 */ 559 R_AE_A_HORIZ_CHROMA_PHASE_OFF, 0x00, 560 561 R_B0_A_VERT_LUMA_SCALING_INC, 0x00, 562 R_B1_A_VERT_LUMA_SCALING_INC_MSB, 0x04, 563 564 R_B2_A_VERT_CHROMA_SCALING_INC, 0x00, 565 R_B3_A_VERT_CHROMA_SCALING_INC_MSB, 0x04, 566 567 R_B4_A_VERT_SCALING_MODE_CNTL, 0x01, 568 569 R_B8_A_VERT_CHROMA_PHASE_OFF_00, 0x00, 570 R_B9_A_VERT_CHROMA_PHASE_OFF_01, 0x00, 571 R_BA_A_VERT_CHROMA_PHASE_OFF_10, 0x00, 572 R_BB_A_VERT_CHROMA_PHASE_OFF_11, 0x00, 573 574 R_BC_A_VERT_LUMA_PHASE_OFF_00, 0x00, 575 R_BD_A_VERT_LUMA_PHASE_OFF_01, 0x00, 576 R_BE_A_VERT_LUMA_PHASE_OFF_10, 0x00, 577 R_BF_A_VERT_LUMA_PHASE_OFF_11, 0x00, 578 579 /* Task B */ 580 R_D0_B_HORIZ_PRESCALING, 0x01, 581 R_D1_B_ACCUMULATION_LENGTH, 0x00, 582 R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER, 0x00, 583 584 /* Configure controls at nominal value*/ 585 R_D4_B_LUMA_BRIGHTNESS_CNTL, 0x80, 586 R_D5_B_LUMA_CONTRAST_CNTL, 0x40, 587 R_D6_B_CHROMA_SATURATION_CNTL, 0x40, 588 589 /* hor lum scaling 0x0400 = 1 */ 590 R_D8_B_HORIZ_LUMA_SCALING_INC, 0x00, 591 R_D9_B_HORIZ_LUMA_SCALING_INC_MSB, 0x04, 592 593 R_DA_B_HORIZ_LUMA_PHASE_OFF, 0x00, 594 595 /* must be hor lum scaling / 2 */ 596 R_DC_B_HORIZ_CHROMA_SCALING, 0x00, 597 R_DD_B_HORIZ_CHROMA_SCALING_MSB, 0x02, 598 599 /* must be offset luma / 2 */ 600 R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA, 0x00, 601 602 R_E0_B_VERT_LUMA_SCALING_INC, 0x00, 603 R_E1_B_VERT_LUMA_SCALING_INC_MSB, 0x04, 604 605 R_E2_B_VERT_CHROMA_SCALING_INC, 0x00, 606 R_E3_B_VERT_CHROMA_SCALING_INC_MSB, 0x04, 607 608 R_E4_B_VERT_SCALING_MODE_CNTL, 0x01, 609 610 R_E8_B_VERT_CHROMA_PHASE_OFF_00, 0x00, 611 R_E9_B_VERT_CHROMA_PHASE_OFF_01, 0x00, 612 R_EA_B_VERT_CHROMA_PHASE_OFF_10, 0x00, 613 R_EB_B_VERT_CHROMA_PHASE_OFF_11, 0x00, 614 615 R_EC_B_VERT_LUMA_PHASE_OFF_00, 0x00, 616 R_ED_B_VERT_LUMA_PHASE_OFF_01, 0x00, 617 R_EE_B_VERT_LUMA_PHASE_OFF_10, 0x00, 618 R_EF_B_VERT_LUMA_PHASE_OFF_11, 0x00, 619 620 R_F2_NOMINAL_PLL2_DTO, 0x50, /* crystal clock = 24.576 MHz, target = 27MHz */ 621 R_F3_PLL_INCREMENT, 0x46, 622 R_F4_PLL2_STATUS, 0x00, 623 R_F7_PULSE_A_POS_MSB, 0x4b, /* not the recommended settings! */ 624 R_F8_PULSE_B_POS, 0x00, 625 R_F9_PULSE_B_POS_MSB, 0x4b, 626 R_FA_PULSE_C_POS, 0x00, 627 R_FB_PULSE_C_POS_MSB, 0x4b, 628 629 /* PLL2 lock detection settings: 71 lines 50% phase error */ 630 R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES, 0x88, 631 632 /* Turn off VBI */ 633 R_40_SLICER_CNTL_1, 0x20, /* No framing code errors allowed. */ 634 R_41_LCR_BASE, 0xff, 635 R_41_LCR_BASE+1, 0xff, 636 R_41_LCR_BASE+2, 0xff, 637 R_41_LCR_BASE+3, 0xff, 638 R_41_LCR_BASE+4, 0xff, 639 R_41_LCR_BASE+5, 0xff, 640 R_41_LCR_BASE+6, 0xff, 641 R_41_LCR_BASE+7, 0xff, 642 R_41_LCR_BASE+8, 0xff, 643 R_41_LCR_BASE+9, 0xff, 644 R_41_LCR_BASE+10, 0xff, 645 R_41_LCR_BASE+11, 0xff, 646 R_41_LCR_BASE+12, 0xff, 647 R_41_LCR_BASE+13, 0xff, 648 R_41_LCR_BASE+14, 0xff, 649 R_41_LCR_BASE+15, 0xff, 650 R_41_LCR_BASE+16, 0xff, 651 R_41_LCR_BASE+17, 0xff, 652 R_41_LCR_BASE+18, 0xff, 653 R_41_LCR_BASE+19, 0xff, 654 R_41_LCR_BASE+20, 0xff, 655 R_41_LCR_BASE+21, 0xff, 656 R_41_LCR_BASE+22, 0xff, 657 R_58_PROGRAM_FRAMING_CODE, 0x40, 658 R_59_H_OFF_FOR_SLICER, 0x47, 659 R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF, 0x83, 660 R_5D_DID, 0xbd, 661 R_5E_SDID, 0x35, 662 663 R_02_INPUT_CNTL_1, 0xc4, /* input tuner -> input 4, amplifier active */ 664 665 R_80_GLOBAL_CNTL_1, 0x20, /* enable task B */ 666 R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, 667 R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, 668 0x00, 0x00 669 }; 670 671 static int saa711x_odd_parity(u8 c) 672 { 673 c ^= (c >> 4); 674 c ^= (c >> 2); 675 c ^= (c >> 1); 676 677 return c & 1; 678 } 679 680 static int saa711x_decode_vps(u8 *dst, u8 *p) 681 { 682 static const u8 biphase_tbl[] = { 683 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, 684 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, 685 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, 686 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, 687 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, 688 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, 689 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, 690 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, 691 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, 692 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, 693 0xc3, 0x4b, 0x43, 0xc3, 0x87, 0x0f, 0x07, 0x87, 694 0x83, 0x0b, 0x03, 0x83, 0xc3, 0x4b, 0x43, 0xc3, 695 0xc1, 0x49, 0x41, 0xc1, 0x85, 0x0d, 0x05, 0x85, 696 0x81, 0x09, 0x01, 0x81, 0xc1, 0x49, 0x41, 0xc1, 697 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, 698 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, 699 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4, 700 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0, 701 0xc2, 0x4a, 0x42, 0xc2, 0x86, 0x0e, 0x06, 0x86, 702 0x82, 0x0a, 0x02, 0x82, 0xc2, 0x4a, 0x42, 0xc2, 703 0xc0, 0x48, 0x40, 0xc0, 0x84, 0x0c, 0x04, 0x84, 704 0x80, 0x08, 0x00, 0x80, 0xc0, 0x48, 0x40, 0xc0, 705 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4, 706 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0, 707 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, 708 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, 709 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, 710 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, 711 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, 712 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, 713 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, 714 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, 715 }; 716 int i; 717 u8 c, err = 0; 718 719 for (i = 0; i < 2 * 13; i += 2) { 720 err |= biphase_tbl[p[i]] | biphase_tbl[p[i + 1]]; 721 c = (biphase_tbl[p[i + 1]] & 0xf) | ((biphase_tbl[p[i]] & 0xf) << 4); 722 dst[i / 2] = c; 723 } 724 return err & 0xf0; 725 } 726 727 static int saa711x_decode_wss(u8 *p) 728 { 729 static const int wss_bits[8] = { 730 0, 0, 0, 1, 0, 1, 1, 1 731 }; 732 unsigned char parity; 733 int wss = 0; 734 int i; 735 736 for (i = 0; i < 16; i++) { 737 int b1 = wss_bits[p[i] & 7]; 738 int b2 = wss_bits[(p[i] >> 3) & 7]; 739 740 if (b1 == b2) 741 return -1; 742 wss |= b2 << i; 743 } 744 parity = wss & 15; 745 parity ^= parity >> 2; 746 parity ^= parity >> 1; 747 748 if (!(parity & 1)) 749 return -1; 750 751 return wss; 752 } 753 754 static int saa711x_s_clock_freq(struct v4l2_subdev *sd, u32 freq) 755 { 756 struct saa711x_state *state = to_state(sd); 757 u32 acpf; 758 u32 acni; 759 u32 hz; 760 u64 f; 761 u8 acc = 0; /* reg 0x3a, audio clock control */ 762 763 /* Checks for chips that don't have audio clock (saa7111, saa7113) */ 764 if (!saa711x_has_reg(state->ident, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD)) 765 return 0; 766 767 v4l2_dbg(1, debug, sd, "set audio clock freq: %d\n", freq); 768 769 /* sanity check */ 770 if (freq < 32000 || freq > 48000) 771 return -EINVAL; 772 773 /* hz is the refresh rate times 100 */ 774 hz = (state->std & V4L2_STD_525_60) ? 5994 : 5000; 775 /* acpf = (256 * freq) / field_frequency == (256 * 100 * freq) / hz */ 776 acpf = (25600 * freq) / hz; 777 /* acni = (256 * freq * 2^23) / crystal_frequency = 778 (freq * 2^(8+23)) / crystal_frequency = 779 (freq << 31) / crystal_frequency */ 780 f = freq; 781 f = f << 31; 782 do_div(f, state->crystal_freq); 783 acni = f; 784 if (state->ucgc) { 785 acpf = acpf * state->cgcdiv / 16; 786 acni = acni * state->cgcdiv / 16; 787 acc = 0x80; 788 if (state->cgcdiv == 3) 789 acc |= 0x40; 790 } 791 if (state->apll) 792 acc |= 0x08; 793 794 if (state->double_asclk) { 795 acpf <<= 1; 796 acni <<= 1; 797 } 798 saa711x_write(sd, R_38_CLK_RATIO_AMXCLK_TO_ASCLK, 0x03); 799 saa711x_write(sd, R_39_CLK_RATIO_ASCLK_TO_ALRCLK, 0x10 << state->double_asclk); 800 saa711x_write(sd, R_3A_AUD_CLK_GEN_BASIC_SETUP, acc); 801 802 saa711x_write(sd, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD, acpf & 0xff); 803 saa711x_write(sd, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD+1, 804 (acpf >> 8) & 0xff); 805 saa711x_write(sd, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD+2, 806 (acpf >> 16) & 0x03); 807 808 saa711x_write(sd, R_34_AUD_MAST_CLK_NOMINAL_INC, acni & 0xff); 809 saa711x_write(sd, R_34_AUD_MAST_CLK_NOMINAL_INC+1, (acni >> 8) & 0xff); 810 saa711x_write(sd, R_34_AUD_MAST_CLK_NOMINAL_INC+2, (acni >> 16) & 0x3f); 811 state->audclk_freq = freq; 812 return 0; 813 } 814 815 static int saa711x_g_volatile_ctrl(struct v4l2_ctrl *ctrl) 816 { 817 struct v4l2_subdev *sd = to_sd(ctrl); 818 struct saa711x_state *state = to_state(sd); 819 820 switch (ctrl->id) { 821 case V4L2_CID_CHROMA_AGC: 822 /* chroma gain cluster */ 823 if (state->agc->val) 824 state->gain->val = 825 saa711x_read(sd, R_0F_CHROMA_GAIN_CNTL) & 0x7f; 826 break; 827 } 828 return 0; 829 } 830 831 static int saa711x_s_ctrl(struct v4l2_ctrl *ctrl) 832 { 833 struct v4l2_subdev *sd = to_sd(ctrl); 834 struct saa711x_state *state = to_state(sd); 835 836 switch (ctrl->id) { 837 case V4L2_CID_BRIGHTNESS: 838 saa711x_write(sd, R_0A_LUMA_BRIGHT_CNTL, ctrl->val); 839 break; 840 841 case V4L2_CID_CONTRAST: 842 saa711x_write(sd, R_0B_LUMA_CONTRAST_CNTL, ctrl->val); 843 break; 844 845 case V4L2_CID_SATURATION: 846 saa711x_write(sd, R_0C_CHROMA_SAT_CNTL, ctrl->val); 847 break; 848 849 case V4L2_CID_HUE: 850 saa711x_write(sd, R_0D_CHROMA_HUE_CNTL, ctrl->val); 851 break; 852 853 case V4L2_CID_CHROMA_AGC: 854 /* chroma gain cluster */ 855 if (state->agc->val) 856 saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, state->gain->val); 857 else 858 saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, state->gain->val | 0x80); 859 break; 860 861 default: 862 return -EINVAL; 863 } 864 865 return 0; 866 } 867 868 static int saa711x_set_size(struct v4l2_subdev *sd, int width, int height) 869 { 870 struct saa711x_state *state = to_state(sd); 871 int HPSC, HFSC; 872 int VSCY; 873 int res; 874 int is_50hz = state->std & V4L2_STD_625_50; 875 int Vsrc = is_50hz ? 576 : 480; 876 877 v4l2_dbg(1, debug, sd, "decoder set size to %ix%i\n", width, height); 878 879 /* FIXME need better bounds checking here */ 880 if ((width < 1) || (width > 1440)) 881 return -EINVAL; 882 if ((height < 1) || (height > Vsrc)) 883 return -EINVAL; 884 885 if (!saa711x_has_reg(state->ident, R_D0_B_HORIZ_PRESCALING)) { 886 /* Decoder only supports 720 columns and 480 or 576 lines */ 887 if (width != 720) 888 return -EINVAL; 889 if (height != Vsrc) 890 return -EINVAL; 891 } 892 893 state->width = width; 894 state->height = height; 895 896 if (!saa711x_has_reg(state->ident, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH)) 897 return 0; 898 899 /* probably have a valid size, let's set it */ 900 /* Set output width/height */ 901 /* width */ 902 903 saa711x_write(sd, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 904 (u8) (width & 0xff)); 905 saa711x_write(sd, R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 906 (u8) ((width >> 8) & 0xff)); 907 908 /* Vertical Scaling uses height/2 */ 909 res = height / 2; 910 911 /* On 60Hz, it is using a higher Vertical Output Size */ 912 if (!is_50hz) 913 res += (VRES_60HZ - 480) >> 1; 914 915 /* height */ 916 saa711x_write(sd, R_CE_B_VERT_OUTPUT_WINDOW_LENGTH, 917 (u8) (res & 0xff)); 918 saa711x_write(sd, R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB, 919 (u8) ((res >> 8) & 0xff)); 920 921 /* Scaling settings */ 922 /* Hprescaler is floor(inres/outres) */ 923 HPSC = (int)(720 / width); 924 /* 0 is not allowed (div. by zero) */ 925 HPSC = HPSC ? HPSC : 1; 926 HFSC = (int)((1024 * 720) / (HPSC * width)); 927 /* FIXME hardcodes to "Task B" 928 * write H prescaler integer */ 929 saa711x_write(sd, R_D0_B_HORIZ_PRESCALING, 930 (u8) (HPSC & 0x3f)); 931 932 v4l2_dbg(1, debug, sd, "Hpsc: 0x%05x, Hfsc: 0x%05x\n", HPSC, HFSC); 933 /* write H fine-scaling (luminance) */ 934 saa711x_write(sd, R_D8_B_HORIZ_LUMA_SCALING_INC, 935 (u8) (HFSC & 0xff)); 936 saa711x_write(sd, R_D9_B_HORIZ_LUMA_SCALING_INC_MSB, 937 (u8) ((HFSC >> 8) & 0xff)); 938 /* write H fine-scaling (chrominance) 939 * must be lum/2, so i'll just bitshift :) */ 940 saa711x_write(sd, R_DC_B_HORIZ_CHROMA_SCALING, 941 (u8) ((HFSC >> 1) & 0xff)); 942 saa711x_write(sd, R_DD_B_HORIZ_CHROMA_SCALING_MSB, 943 (u8) ((HFSC >> 9) & 0xff)); 944 945 VSCY = (int)((1024 * Vsrc) / height); 946 v4l2_dbg(1, debug, sd, "Vsrc: %d, Vscy: 0x%05x\n", Vsrc, VSCY); 947 948 /* Correct Contrast and Luminance */ 949 saa711x_write(sd, R_D5_B_LUMA_CONTRAST_CNTL, 950 (u8) (64 * 1024 / VSCY)); 951 saa711x_write(sd, R_D6_B_CHROMA_SATURATION_CNTL, 952 (u8) (64 * 1024 / VSCY)); 953 954 /* write V fine-scaling (luminance) */ 955 saa711x_write(sd, R_E0_B_VERT_LUMA_SCALING_INC, 956 (u8) (VSCY & 0xff)); 957 saa711x_write(sd, R_E1_B_VERT_LUMA_SCALING_INC_MSB, 958 (u8) ((VSCY >> 8) & 0xff)); 959 /* write V fine-scaling (chrominance) */ 960 saa711x_write(sd, R_E2_B_VERT_CHROMA_SCALING_INC, 961 (u8) (VSCY & 0xff)); 962 saa711x_write(sd, R_E3_B_VERT_CHROMA_SCALING_INC_MSB, 963 (u8) ((VSCY >> 8) & 0xff)); 964 965 saa711x_writeregs(sd, saa7115_cfg_reset_scaler); 966 967 /* Activates task "B" */ 968 saa711x_write(sd, R_80_GLOBAL_CNTL_1, 969 saa711x_read(sd, R_80_GLOBAL_CNTL_1) | 0x20); 970 971 return 0; 972 } 973 974 static void saa711x_set_v4lstd(struct v4l2_subdev *sd, v4l2_std_id std) 975 { 976 struct saa711x_state *state = to_state(sd); 977 978 /* Prevent unnecessary standard changes. During a standard 979 change the I-Port is temporarily disabled. Any devices 980 reading from that port can get confused. 981 Note that s_std is also used to switch from 982 radio to TV mode, so if a s_std is broadcast to 983 all I2C devices then you do not want to have an unwanted 984 side-effect here. */ 985 if (std == state->std) 986 return; 987 988 state->std = std; 989 990 // This works for NTSC-M, SECAM-L and the 50Hz PAL variants. 991 if (std & V4L2_STD_525_60) { 992 v4l2_dbg(1, debug, sd, "decoder set standard 60 Hz\n"); 993 if (state->ident == GM7113C) { 994 u8 reg = saa711x_read(sd, R_08_SYNC_CNTL); 995 reg &= ~(SAA7113_R_08_FSEL | SAA7113_R_08_AUFD); 996 reg |= SAA7113_R_08_FSEL; 997 saa711x_write(sd, R_08_SYNC_CNTL, reg); 998 } else { 999 saa711x_writeregs(sd, saa7115_cfg_60hz_video); 1000 } 1001 saa711x_set_size(sd, 720, 480); 1002 } else { 1003 v4l2_dbg(1, debug, sd, "decoder set standard 50 Hz\n"); 1004 if (state->ident == GM7113C) { 1005 u8 reg = saa711x_read(sd, R_08_SYNC_CNTL); 1006 reg &= ~(SAA7113_R_08_FSEL | SAA7113_R_08_AUFD); 1007 saa711x_write(sd, R_08_SYNC_CNTL, reg); 1008 } else { 1009 saa711x_writeregs(sd, saa7115_cfg_50hz_video); 1010 } 1011 saa711x_set_size(sd, 720, 576); 1012 } 1013 1014 /* Register 0E - Bits D6-D4 on NO-AUTO mode 1015 (SAA7111 and SAA7113 doesn't have auto mode) 1016 50 Hz / 625 lines 60 Hz / 525 lines 1017 000 PAL BGDHI (4.43Mhz) NTSC M (3.58MHz) 1018 001 NTSC 4.43 (50 Hz) PAL 4.43 (60 Hz) 1019 010 Combination-PAL N (3.58MHz) NTSC 4.43 (60 Hz) 1020 011 NTSC N (3.58MHz) PAL M (3.58MHz) 1021 100 reserved NTSC-Japan (3.58MHz) 1022 */ 1023 if (state->ident <= SAA7113 || 1024 state->ident == GM7113C) { 1025 u8 reg = saa711x_read(sd, R_0E_CHROMA_CNTL_1) & 0x8f; 1026 1027 if (std == V4L2_STD_PAL_M) { 1028 reg |= 0x30; 1029 } else if (std == V4L2_STD_PAL_Nc) { 1030 reg |= 0x20; 1031 } else if (std == V4L2_STD_PAL_60) { 1032 reg |= 0x10; 1033 } else if (std == V4L2_STD_NTSC_M_JP) { 1034 reg |= 0x40; 1035 } else if (std & V4L2_STD_SECAM) { 1036 reg |= 0x50; 1037 } 1038 saa711x_write(sd, R_0E_CHROMA_CNTL_1, reg); 1039 } else { 1040 /* restart task B if needed */ 1041 int taskb = saa711x_read(sd, R_80_GLOBAL_CNTL_1) & 0x10; 1042 1043 if (taskb && state->ident == SAA7114) 1044 saa711x_writeregs(sd, saa7115_cfg_vbi_on); 1045 1046 /* switch audio mode too! */ 1047 saa711x_s_clock_freq(sd, state->audclk_freq); 1048 } 1049 } 1050 1051 /* setup the sliced VBI lcr registers according to the sliced VBI format */ 1052 static void saa711x_set_lcr(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt) 1053 { 1054 struct saa711x_state *state = to_state(sd); 1055 int is_50hz = (state->std & V4L2_STD_625_50); 1056 u8 lcr[24]; 1057 int i, x; 1058 1059 #if 1 1060 /* saa7113/7114/7118 VBI support are experimental */ 1061 if (!saa711x_has_reg(state->ident, R_41_LCR_BASE)) 1062 return; 1063 1064 #else 1065 /* SAA7113 and SAA7118 also should support VBI - Need testing */ 1066 if (state->ident != SAA7115) 1067 return; 1068 #endif 1069 1070 for (i = 0; i <= 23; i++) 1071 lcr[i] = 0xff; 1072 1073 if (fmt == NULL) { 1074 /* raw VBI */ 1075 if (is_50hz) 1076 for (i = 6; i <= 23; i++) 1077 lcr[i] = 0xdd; 1078 else 1079 for (i = 10; i <= 21; i++) 1080 lcr[i] = 0xdd; 1081 } else { 1082 /* sliced VBI */ 1083 /* first clear lines that cannot be captured */ 1084 if (is_50hz) { 1085 for (i = 0; i <= 5; i++) 1086 fmt->service_lines[0][i] = 1087 fmt->service_lines[1][i] = 0; 1088 } 1089 else { 1090 for (i = 0; i <= 9; i++) 1091 fmt->service_lines[0][i] = 1092 fmt->service_lines[1][i] = 0; 1093 for (i = 22; i <= 23; i++) 1094 fmt->service_lines[0][i] = 1095 fmt->service_lines[1][i] = 0; 1096 } 1097 1098 /* Now set the lcr values according to the specified service */ 1099 for (i = 6; i <= 23; i++) { 1100 lcr[i] = 0; 1101 for (x = 0; x <= 1; x++) { 1102 switch (fmt->service_lines[1-x][i]) { 1103 case 0: 1104 lcr[i] |= 0xf << (4 * x); 1105 break; 1106 case V4L2_SLICED_TELETEXT_B: 1107 lcr[i] |= 1 << (4 * x); 1108 break; 1109 case V4L2_SLICED_CAPTION_525: 1110 lcr[i] |= 4 << (4 * x); 1111 break; 1112 case V4L2_SLICED_WSS_625: 1113 lcr[i] |= 5 << (4 * x); 1114 break; 1115 case V4L2_SLICED_VPS: 1116 lcr[i] |= 7 << (4 * x); 1117 break; 1118 } 1119 } 1120 } 1121 } 1122 1123 /* write the lcr registers */ 1124 for (i = 2; i <= 23; i++) { 1125 saa711x_write(sd, i - 2 + R_41_LCR_BASE, lcr[i]); 1126 } 1127 1128 /* enable/disable raw VBI capturing */ 1129 saa711x_writeregs(sd, fmt == NULL ? 1130 saa7115_cfg_vbi_on : 1131 saa7115_cfg_vbi_off); 1132 } 1133 1134 static int saa711x_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *sliced) 1135 { 1136 static u16 lcr2vbi[] = { 1137 0, V4L2_SLICED_TELETEXT_B, 0, /* 1 */ 1138 0, V4L2_SLICED_CAPTION_525, /* 4 */ 1139 V4L2_SLICED_WSS_625, 0, /* 5 */ 1140 V4L2_SLICED_VPS, 0, 0, 0, 0, /* 7 */ 1141 0, 0, 0, 0 1142 }; 1143 int i; 1144 1145 memset(sliced->service_lines, 0, sizeof(sliced->service_lines)); 1146 sliced->service_set = 0; 1147 /* done if using raw VBI */ 1148 if (saa711x_read(sd, R_80_GLOBAL_CNTL_1) & 0x10) 1149 return 0; 1150 for (i = 2; i <= 23; i++) { 1151 u8 v = saa711x_read(sd, i - 2 + R_41_LCR_BASE); 1152 1153 sliced->service_lines[0][i] = lcr2vbi[v >> 4]; 1154 sliced->service_lines[1][i] = lcr2vbi[v & 0xf]; 1155 sliced->service_set |= 1156 sliced->service_lines[0][i] | sliced->service_lines[1][i]; 1157 } 1158 return 0; 1159 } 1160 1161 static int saa711x_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt) 1162 { 1163 saa711x_set_lcr(sd, NULL); 1164 return 0; 1165 } 1166 1167 static int saa711x_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt) 1168 { 1169 saa711x_set_lcr(sd, fmt); 1170 return 0; 1171 } 1172 1173 static int saa711x_set_fmt(struct v4l2_subdev *sd, 1174 struct v4l2_subdev_pad_config *cfg, 1175 struct v4l2_subdev_format *format) 1176 { 1177 struct v4l2_mbus_framefmt *fmt = &format->format; 1178 1179 if (format->pad || fmt->code != MEDIA_BUS_FMT_FIXED) 1180 return -EINVAL; 1181 fmt->field = V4L2_FIELD_INTERLACED; 1182 fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; 1183 if (format->which == V4L2_SUBDEV_FORMAT_TRY) 1184 return 0; 1185 return saa711x_set_size(sd, fmt->width, fmt->height); 1186 } 1187 1188 /* Decode the sliced VBI data stream as created by the saa7115. 1189 The format is described in the saa7115 datasheet in Tables 25 and 26 1190 and in Figure 33. 1191 The current implementation uses SAV/EAV codes and not the ancillary data 1192 headers. The vbi->p pointer points to the R_5E_SDID byte right after the SAV 1193 code. */ 1194 static int saa711x_decode_vbi_line(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi) 1195 { 1196 struct saa711x_state *state = to_state(sd); 1197 static const char vbi_no_data_pattern[] = { 1198 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0 1199 }; 1200 u8 *p = vbi->p; 1201 u32 wss; 1202 int id1, id2; /* the ID1 and ID2 bytes from the internal header */ 1203 1204 vbi->type = 0; /* mark result as a failure */ 1205 id1 = p[2]; 1206 id2 = p[3]; 1207 /* Note: the field bit is inverted for 60 Hz video */ 1208 if (state->std & V4L2_STD_525_60) 1209 id1 ^= 0x40; 1210 1211 /* Skip internal header, p now points to the start of the payload */ 1212 p += 4; 1213 vbi->p = p; 1214 1215 /* calculate field and line number of the VBI packet (1-23) */ 1216 vbi->is_second_field = ((id1 & 0x40) != 0); 1217 vbi->line = (id1 & 0x3f) << 3; 1218 vbi->line |= (id2 & 0x70) >> 4; 1219 1220 /* Obtain data type */ 1221 id2 &= 0xf; 1222 1223 /* If the VBI slicer does not detect any signal it will fill up 1224 the payload buffer with 0xa0 bytes. */ 1225 if (!memcmp(p, vbi_no_data_pattern, sizeof(vbi_no_data_pattern))) 1226 return 0; 1227 1228 /* decode payloads */ 1229 switch (id2) { 1230 case 1: 1231 vbi->type = V4L2_SLICED_TELETEXT_B; 1232 break; 1233 case 4: 1234 if (!saa711x_odd_parity(p[0]) || !saa711x_odd_parity(p[1])) 1235 return 0; 1236 vbi->type = V4L2_SLICED_CAPTION_525; 1237 break; 1238 case 5: 1239 wss = saa711x_decode_wss(p); 1240 if (wss == -1) 1241 return 0; 1242 p[0] = wss & 0xff; 1243 p[1] = wss >> 8; 1244 vbi->type = V4L2_SLICED_WSS_625; 1245 break; 1246 case 7: 1247 if (saa711x_decode_vps(p, p) != 0) 1248 return 0; 1249 vbi->type = V4L2_SLICED_VPS; 1250 break; 1251 default: 1252 break; 1253 } 1254 return 0; 1255 } 1256 1257 /* ============ SAA7115 AUDIO settings (end) ============= */ 1258 1259 static int saa711x_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) 1260 { 1261 struct saa711x_state *state = to_state(sd); 1262 int status; 1263 1264 if (state->radio) 1265 return 0; 1266 status = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); 1267 1268 v4l2_dbg(1, debug, sd, "status: 0x%02x\n", status); 1269 vt->signal = ((status & (1 << 6)) == 0) ? 0xffff : 0x0; 1270 return 0; 1271 } 1272 1273 static int saa711x_s_std(struct v4l2_subdev *sd, v4l2_std_id std) 1274 { 1275 struct saa711x_state *state = to_state(sd); 1276 1277 state->radio = 0; 1278 saa711x_set_v4lstd(sd, std); 1279 return 0; 1280 } 1281 1282 static int saa711x_s_radio(struct v4l2_subdev *sd) 1283 { 1284 struct saa711x_state *state = to_state(sd); 1285 1286 state->radio = 1; 1287 return 0; 1288 } 1289 1290 static int saa711x_s_routing(struct v4l2_subdev *sd, 1291 u32 input, u32 output, u32 config) 1292 { 1293 struct saa711x_state *state = to_state(sd); 1294 u8 mask = (state->ident <= SAA7111A) ? 0xf8 : 0xf0; 1295 1296 v4l2_dbg(1, debug, sd, "decoder set input %d output %d\n", 1297 input, output); 1298 1299 /* saa7111/3 does not have these inputs */ 1300 if ((state->ident <= SAA7113 || 1301 state->ident == GM7113C) && 1302 (input == SAA7115_COMPOSITE4 || 1303 input == SAA7115_COMPOSITE5)) { 1304 return -EINVAL; 1305 } 1306 if (input > SAA7115_SVIDEO3) 1307 return -EINVAL; 1308 if (state->input == input && state->output == output) 1309 return 0; 1310 v4l2_dbg(1, debug, sd, "now setting %s input %s output\n", 1311 (input >= SAA7115_SVIDEO0) ? "S-Video" : "Composite", 1312 (output == SAA7115_IPORT_ON) ? "iport on" : "iport off"); 1313 state->input = input; 1314 1315 /* saa7111 has slightly different input numbering */ 1316 if (state->ident <= SAA7111A) { 1317 if (input >= SAA7115_COMPOSITE4) 1318 input -= 2; 1319 /* saa7111 specific */ 1320 saa711x_write(sd, R_10_CHROMA_CNTL_2, 1321 (saa711x_read(sd, R_10_CHROMA_CNTL_2) & 0x3f) | 1322 ((output & 0xc0) ^ 0x40)); 1323 saa711x_write(sd, R_13_RT_X_PORT_OUT_CNTL, 1324 (saa711x_read(sd, R_13_RT_X_PORT_OUT_CNTL) & 0xf0) | 1325 ((output & 2) ? 0x0a : 0)); 1326 } 1327 1328 /* select mode */ 1329 saa711x_write(sd, R_02_INPUT_CNTL_1, 1330 (saa711x_read(sd, R_02_INPUT_CNTL_1) & mask) | 1331 input); 1332 1333 /* bypass chrominance trap for S-Video modes */ 1334 saa711x_write(sd, R_09_LUMA_CNTL, 1335 (saa711x_read(sd, R_09_LUMA_CNTL) & 0x7f) | 1336 (state->input >= SAA7115_SVIDEO0 ? 0x80 : 0x0)); 1337 1338 state->output = output; 1339 if (state->ident == SAA7114 || 1340 state->ident == SAA7115) { 1341 saa711x_write(sd, R_83_X_PORT_I_O_ENA_AND_OUT_CLK, 1342 (saa711x_read(sd, R_83_X_PORT_I_O_ENA_AND_OUT_CLK) & 0xfe) | 1343 (state->output & 0x01)); 1344 } 1345 if (state->ident > SAA7111A) { 1346 if (config & SAA7115_IDQ_IS_DEFAULT) 1347 saa711x_write(sd, R_85_I_PORT_SIGNAL_POLAR, 0x20); 1348 else 1349 saa711x_write(sd, R_85_I_PORT_SIGNAL_POLAR, 0x21); 1350 } 1351 return 0; 1352 } 1353 1354 static int saa711x_s_gpio(struct v4l2_subdev *sd, u32 val) 1355 { 1356 struct saa711x_state *state = to_state(sd); 1357 1358 if (state->ident > SAA7111A) 1359 return -EINVAL; 1360 saa711x_write(sd, 0x11, (saa711x_read(sd, 0x11) & 0x7f) | 1361 (val ? 0x80 : 0)); 1362 return 0; 1363 } 1364 1365 static int saa711x_s_stream(struct v4l2_subdev *sd, int enable) 1366 { 1367 struct saa711x_state *state = to_state(sd); 1368 1369 v4l2_dbg(1, debug, sd, "%s output\n", 1370 enable ? "enable" : "disable"); 1371 1372 if (state->enable == enable) 1373 return 0; 1374 state->enable = enable; 1375 if (!saa711x_has_reg(state->ident, R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED)) 1376 return 0; 1377 saa711x_write(sd, R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, state->enable); 1378 return 0; 1379 } 1380 1381 static int saa711x_s_crystal_freq(struct v4l2_subdev *sd, u32 freq, u32 flags) 1382 { 1383 struct saa711x_state *state = to_state(sd); 1384 1385 if (freq != SAA7115_FREQ_32_11_MHZ && freq != SAA7115_FREQ_24_576_MHZ) 1386 return -EINVAL; 1387 state->crystal_freq = freq; 1388 state->double_asclk = flags & SAA7115_FREQ_FL_DOUBLE_ASCLK; 1389 state->cgcdiv = (flags & SAA7115_FREQ_FL_CGCDIV) ? 3 : 4; 1390 state->ucgc = flags & SAA7115_FREQ_FL_UCGC; 1391 state->apll = flags & SAA7115_FREQ_FL_APLL; 1392 saa711x_s_clock_freq(sd, state->audclk_freq); 1393 return 0; 1394 } 1395 1396 static int saa711x_reset(struct v4l2_subdev *sd, u32 val) 1397 { 1398 v4l2_dbg(1, debug, sd, "decoder RESET\n"); 1399 saa711x_writeregs(sd, saa7115_cfg_reset_scaler); 1400 return 0; 1401 } 1402 1403 static int saa711x_g_vbi_data(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_data *data) 1404 { 1405 /* Note: the internal field ID is inverted for NTSC, 1406 so data->field 0 maps to the saa7115 even field, 1407 whereas for PAL it maps to the saa7115 odd field. */ 1408 switch (data->id) { 1409 case V4L2_SLICED_WSS_625: 1410 if (saa711x_read(sd, 0x6b) & 0xc0) 1411 return -EIO; 1412 data->data[0] = saa711x_read(sd, 0x6c); 1413 data->data[1] = saa711x_read(sd, 0x6d); 1414 return 0; 1415 case V4L2_SLICED_CAPTION_525: 1416 if (data->field == 0) { 1417 /* CC */ 1418 if (saa711x_read(sd, 0x66) & 0x30) 1419 return -EIO; 1420 data->data[0] = saa711x_read(sd, 0x69); 1421 data->data[1] = saa711x_read(sd, 0x6a); 1422 return 0; 1423 } 1424 /* XDS */ 1425 if (saa711x_read(sd, 0x66) & 0xc0) 1426 return -EIO; 1427 data->data[0] = saa711x_read(sd, 0x67); 1428 data->data[1] = saa711x_read(sd, 0x68); 1429 return 0; 1430 default: 1431 return -EINVAL; 1432 } 1433 } 1434 1435 static int saa711x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) 1436 { 1437 struct saa711x_state *state = to_state(sd); 1438 int reg1f, reg1e; 1439 1440 /* 1441 * The V4L2 core already initializes std with all supported 1442 * Standards. All driver needs to do is to mask it, to remove 1443 * standards that don't apply from the mask 1444 */ 1445 1446 reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); 1447 1448 if (state->ident == SAA7115) { 1449 reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC); 1450 1451 v4l2_dbg(1, debug, sd, "Status byte 1 (0x1e)=0x%02x\n", reg1e); 1452 1453 switch (reg1e & 0x03) { 1454 case 1: 1455 *std &= V4L2_STD_NTSC; 1456 break; 1457 case 2: 1458 /* 1459 * V4L2_STD_PAL just cover the european PAL standards. 1460 * This is wrong, as the device could also be using an 1461 * other PAL standard. 1462 */ 1463 *std &= V4L2_STD_PAL | V4L2_STD_PAL_N | V4L2_STD_PAL_Nc | 1464 V4L2_STD_PAL_M | V4L2_STD_PAL_60; 1465 break; 1466 case 3: 1467 *std &= V4L2_STD_SECAM; 1468 break; 1469 default: 1470 *std = V4L2_STD_UNKNOWN; 1471 /* Can't detect anything */ 1472 break; 1473 } 1474 } 1475 1476 v4l2_dbg(1, debug, sd, "Status byte 2 (0x1f)=0x%02x\n", reg1f); 1477 1478 /* horizontal/vertical not locked */ 1479 if (reg1f & 0x40) { 1480 *std = V4L2_STD_UNKNOWN; 1481 goto ret; 1482 } 1483 1484 if (reg1f & 0x20) 1485 *std &= V4L2_STD_525_60; 1486 else 1487 *std &= V4L2_STD_625_50; 1488 1489 ret: 1490 v4l2_dbg(1, debug, sd, "detected std mask = %08Lx\n", *std); 1491 1492 return 0; 1493 } 1494 1495 static int saa711x_g_input_status(struct v4l2_subdev *sd, u32 *status) 1496 { 1497 struct saa711x_state *state = to_state(sd); 1498 int reg1e = 0x80; 1499 int reg1f; 1500 1501 *status = V4L2_IN_ST_NO_SIGNAL; 1502 if (state->ident == SAA7115) 1503 reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC); 1504 reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); 1505 if ((reg1f & 0xc1) == 0x81 && (reg1e & 0xc0) == 0x80) 1506 *status = 0; 1507 return 0; 1508 } 1509 1510 #ifdef CONFIG_VIDEO_ADV_DEBUG 1511 static int saa711x_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) 1512 { 1513 reg->val = saa711x_read(sd, reg->reg & 0xff); 1514 reg->size = 1; 1515 return 0; 1516 } 1517 1518 static int saa711x_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) 1519 { 1520 saa711x_write(sd, reg->reg & 0xff, reg->val & 0xff); 1521 return 0; 1522 } 1523 #endif 1524 1525 static int saa711x_log_status(struct v4l2_subdev *sd) 1526 { 1527 struct saa711x_state *state = to_state(sd); 1528 int reg1e, reg1f; 1529 int signalOk; 1530 int vcr; 1531 1532 v4l2_info(sd, "Audio frequency: %d Hz\n", state->audclk_freq); 1533 if (state->ident != SAA7115) { 1534 /* status for the saa7114 */ 1535 reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); 1536 signalOk = (reg1f & 0xc1) == 0x81; 1537 v4l2_info(sd, "Video signal: %s\n", signalOk ? "ok" : "bad"); 1538 v4l2_info(sd, "Frequency: %s\n", (reg1f & 0x20) ? "60 Hz" : "50 Hz"); 1539 return 0; 1540 } 1541 1542 /* status for the saa7115 */ 1543 reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC); 1544 reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); 1545 1546 signalOk = (reg1f & 0xc1) == 0x81 && (reg1e & 0xc0) == 0x80; 1547 vcr = !(reg1f & 0x10); 1548 1549 if (state->input >= 6) 1550 v4l2_info(sd, "Input: S-Video %d\n", state->input - 6); 1551 else 1552 v4l2_info(sd, "Input: Composite %d\n", state->input); 1553 v4l2_info(sd, "Video signal: %s\n", signalOk ? (vcr ? "VCR" : "broadcast/DVD") : "bad"); 1554 v4l2_info(sd, "Frequency: %s\n", (reg1f & 0x20) ? "60 Hz" : "50 Hz"); 1555 1556 switch (reg1e & 0x03) { 1557 case 1: 1558 v4l2_info(sd, "Detected format: NTSC\n"); 1559 break; 1560 case 2: 1561 v4l2_info(sd, "Detected format: PAL\n"); 1562 break; 1563 case 3: 1564 v4l2_info(sd, "Detected format: SECAM\n"); 1565 break; 1566 default: 1567 v4l2_info(sd, "Detected format: BW/No color\n"); 1568 break; 1569 } 1570 v4l2_info(sd, "Width, Height: %d, %d\n", state->width, state->height); 1571 v4l2_ctrl_handler_log_status(&state->hdl, sd->name); 1572 return 0; 1573 } 1574 1575 /* ----------------------------------------------------------------------- */ 1576 1577 static const struct v4l2_ctrl_ops saa711x_ctrl_ops = { 1578 .s_ctrl = saa711x_s_ctrl, 1579 .g_volatile_ctrl = saa711x_g_volatile_ctrl, 1580 }; 1581 1582 static const struct v4l2_subdev_core_ops saa711x_core_ops = { 1583 .log_status = saa711x_log_status, 1584 .reset = saa711x_reset, 1585 .s_gpio = saa711x_s_gpio, 1586 #ifdef CONFIG_VIDEO_ADV_DEBUG 1587 .g_register = saa711x_g_register, 1588 .s_register = saa711x_s_register, 1589 #endif 1590 }; 1591 1592 static const struct v4l2_subdev_tuner_ops saa711x_tuner_ops = { 1593 .s_radio = saa711x_s_radio, 1594 .g_tuner = saa711x_g_tuner, 1595 }; 1596 1597 static const struct v4l2_subdev_audio_ops saa711x_audio_ops = { 1598 .s_clock_freq = saa711x_s_clock_freq, 1599 }; 1600 1601 static const struct v4l2_subdev_video_ops saa711x_video_ops = { 1602 .s_std = saa711x_s_std, 1603 .s_routing = saa711x_s_routing, 1604 .s_crystal_freq = saa711x_s_crystal_freq, 1605 .s_stream = saa711x_s_stream, 1606 .querystd = saa711x_querystd, 1607 .g_input_status = saa711x_g_input_status, 1608 }; 1609 1610 static const struct v4l2_subdev_vbi_ops saa711x_vbi_ops = { 1611 .g_vbi_data = saa711x_g_vbi_data, 1612 .decode_vbi_line = saa711x_decode_vbi_line, 1613 .g_sliced_fmt = saa711x_g_sliced_fmt, 1614 .s_sliced_fmt = saa711x_s_sliced_fmt, 1615 .s_raw_fmt = saa711x_s_raw_fmt, 1616 }; 1617 1618 static const struct v4l2_subdev_pad_ops saa711x_pad_ops = { 1619 .set_fmt = saa711x_set_fmt, 1620 }; 1621 1622 static const struct v4l2_subdev_ops saa711x_ops = { 1623 .core = &saa711x_core_ops, 1624 .tuner = &saa711x_tuner_ops, 1625 .audio = &saa711x_audio_ops, 1626 .video = &saa711x_video_ops, 1627 .vbi = &saa711x_vbi_ops, 1628 .pad = &saa711x_pad_ops, 1629 }; 1630 1631 #define CHIP_VER_SIZE 16 1632 1633 /* ----------------------------------------------------------------------- */ 1634 1635 static void saa711x_write_platform_data(struct saa711x_state *state, 1636 struct saa7115_platform_data *data) 1637 { 1638 struct v4l2_subdev *sd = &state->sd; 1639 u8 work; 1640 1641 if (state->ident != GM7113C && 1642 state->ident != SAA7113) 1643 return; 1644 1645 if (data->saa7113_r08_htc) { 1646 work = saa711x_read(sd, R_08_SYNC_CNTL); 1647 work &= ~SAA7113_R_08_HTC_MASK; 1648 work |= ((*data->saa7113_r08_htc) << SAA7113_R_08_HTC_OFFSET); 1649 saa711x_write(sd, R_08_SYNC_CNTL, work); 1650 } 1651 1652 if (data->saa7113_r10_vrln) { 1653 work = saa711x_read(sd, R_10_CHROMA_CNTL_2); 1654 work &= ~SAA7113_R_10_VRLN_MASK; 1655 if (*data->saa7113_r10_vrln) 1656 work |= (1 << SAA7113_R_10_VRLN_OFFSET); 1657 saa711x_write(sd, R_10_CHROMA_CNTL_2, work); 1658 } 1659 1660 if (data->saa7113_r10_ofts) { 1661 work = saa711x_read(sd, R_10_CHROMA_CNTL_2); 1662 work &= ~SAA7113_R_10_OFTS_MASK; 1663 work |= (*data->saa7113_r10_ofts << SAA7113_R_10_OFTS_OFFSET); 1664 saa711x_write(sd, R_10_CHROMA_CNTL_2, work); 1665 } 1666 1667 if (data->saa7113_r12_rts0) { 1668 work = saa711x_read(sd, R_12_RT_SIGNAL_CNTL); 1669 work &= ~SAA7113_R_12_RTS0_MASK; 1670 work |= (*data->saa7113_r12_rts0 << SAA7113_R_12_RTS0_OFFSET); 1671 1672 /* According to the datasheet, 1673 * SAA7113_RTS_DOT_IN should only be used on RTS1 */ 1674 WARN_ON(*data->saa7113_r12_rts0 == SAA7113_RTS_DOT_IN); 1675 saa711x_write(sd, R_12_RT_SIGNAL_CNTL, work); 1676 } 1677 1678 if (data->saa7113_r12_rts1) { 1679 work = saa711x_read(sd, R_12_RT_SIGNAL_CNTL); 1680 work &= ~SAA7113_R_12_RTS1_MASK; 1681 work |= (*data->saa7113_r12_rts1 << SAA7113_R_12_RTS1_OFFSET); 1682 saa711x_write(sd, R_12_RT_SIGNAL_CNTL, work); 1683 } 1684 1685 if (data->saa7113_r13_adlsb) { 1686 work = saa711x_read(sd, R_13_RT_X_PORT_OUT_CNTL); 1687 work &= ~SAA7113_R_13_ADLSB_MASK; 1688 if (*data->saa7113_r13_adlsb) 1689 work |= (1 << SAA7113_R_13_ADLSB_OFFSET); 1690 saa711x_write(sd, R_13_RT_X_PORT_OUT_CNTL, work); 1691 } 1692 } 1693 1694 /** 1695 * saa711x_detect_chip - Detects the saa711x (or clone) variant 1696 * @client: I2C client structure. 1697 * @id: I2C device ID structure. 1698 * @name: Name of the device to be filled. 1699 * 1700 * Detects the Philips/NXP saa711x chip, or some clone of it. 1701 * if 'id' is NULL or id->driver_data is equal to 1, it auto-probes 1702 * the analog demod. 1703 * If the tuner is not found, it returns -ENODEV. 1704 * If auto-detection is disabled and the tuner doesn't match what it was 1705 * required, it returns -EINVAL and fills 'name'. 1706 * If the chip is found, it returns the chip ID and fills 'name'. 1707 */ 1708 static int saa711x_detect_chip(struct i2c_client *client, 1709 const struct i2c_device_id *id, 1710 char *name) 1711 { 1712 char chip_ver[CHIP_VER_SIZE]; 1713 char chip_id; 1714 int i; 1715 int autodetect; 1716 1717 autodetect = !id || id->driver_data == 1; 1718 1719 /* Read the chip version register */ 1720 for (i = 0; i < CHIP_VER_SIZE; i++) { 1721 i2c_smbus_write_byte_data(client, 0, i); 1722 chip_ver[i] = i2c_smbus_read_byte_data(client, 0); 1723 name[i] = (chip_ver[i] & 0x0f) + '0'; 1724 if (name[i] > '9') 1725 name[i] += 'a' - '9' - 1; 1726 } 1727 name[i] = '\0'; 1728 1729 /* Check if it is a Philips/NXP chip */ 1730 if (!memcmp(name + 1, "f711", 4)) { 1731 chip_id = name[5]; 1732 snprintf(name, CHIP_VER_SIZE, "saa711%c", chip_id); 1733 1734 if (!autodetect && strcmp(name, id->name)) 1735 return -EINVAL; 1736 1737 switch (chip_id) { 1738 case '1': 1739 if (chip_ver[0] & 0xf0) { 1740 snprintf(name, CHIP_VER_SIZE, "saa711%ca", chip_id); 1741 v4l_info(client, "saa7111a variant found\n"); 1742 return SAA7111A; 1743 } 1744 return SAA7111; 1745 case '3': 1746 return SAA7113; 1747 case '4': 1748 return SAA7114; 1749 case '5': 1750 return SAA7115; 1751 case '8': 1752 return SAA7118; 1753 default: 1754 v4l2_info(client, 1755 "WARNING: Philips/NXP chip unknown - Falling back to saa7111\n"); 1756 return SAA7111; 1757 } 1758 } 1759 1760 /* Check if it is a gm7113c */ 1761 if (!memcmp(name, "0000", 4)) { 1762 chip_id = 0; 1763 for (i = 0; i < 4; i++) { 1764 chip_id = chip_id << 1; 1765 chip_id |= (chip_ver[i] & 0x80) ? 1 : 0; 1766 } 1767 1768 /* 1769 * Note: From the datasheet, only versions 1 and 2 1770 * exists. However, tests on a device labeled as: 1771 * "GM7113C 1145" returned "10" on all 16 chip 1772 * version (reg 0x00) reads. So, we need to also 1773 * accept at least verion 0. For now, let's just 1774 * assume that a device that returns "0000" for 1775 * the lower nibble is a gm7113c. 1776 */ 1777 1778 strlcpy(name, "gm7113c", CHIP_VER_SIZE); 1779 1780 if (!autodetect && strcmp(name, id->name)) 1781 return -EINVAL; 1782 1783 v4l_dbg(1, debug, client, 1784 "It seems to be a %s chip (%*ph) @ 0x%x.\n", 1785 name, 16, chip_ver, client->addr << 1); 1786 1787 return GM7113C; 1788 } 1789 1790 /* Check if it is a CJC7113 */ 1791 if (!memcmp(name, "1111111111111111", CHIP_VER_SIZE)) { 1792 strlcpy(name, "cjc7113", CHIP_VER_SIZE); 1793 1794 if (!autodetect && strcmp(name, id->name)) 1795 return -EINVAL; 1796 1797 v4l_dbg(1, debug, client, 1798 "It seems to be a %s chip (%*ph) @ 0x%x.\n", 1799 name, 16, chip_ver, client->addr << 1); 1800 1801 /* CJC7113 seems to be SAA7113-compatible */ 1802 return SAA7113; 1803 } 1804 1805 /* Chip was not discovered. Return its ID and don't bind */ 1806 v4l_dbg(1, debug, client, "chip %*ph @ 0x%x is unknown.\n", 1807 16, chip_ver, client->addr << 1); 1808 return -ENODEV; 1809 } 1810 1811 static int saa711x_probe(struct i2c_client *client, 1812 const struct i2c_device_id *id) 1813 { 1814 struct saa711x_state *state; 1815 struct v4l2_subdev *sd; 1816 struct v4l2_ctrl_handler *hdl; 1817 struct saa7115_platform_data *pdata; 1818 int ident; 1819 char name[CHIP_VER_SIZE + 1]; 1820 #if defined(CONFIG_MEDIA_CONTROLLER) 1821 int ret; 1822 #endif 1823 1824 /* Check if the adapter supports the needed features */ 1825 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) 1826 return -EIO; 1827 1828 ident = saa711x_detect_chip(client, id, name); 1829 if (ident == -EINVAL) { 1830 /* Chip exists, but doesn't match */ 1831 v4l_warn(client, "found %s while %s was expected\n", 1832 name, id->name); 1833 return -ENODEV; 1834 } 1835 if (ident < 0) 1836 return ident; 1837 1838 strlcpy(client->name, name, sizeof(client->name)); 1839 1840 state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL); 1841 if (state == NULL) 1842 return -ENOMEM; 1843 sd = &state->sd; 1844 v4l2_i2c_subdev_init(sd, client, &saa711x_ops); 1845 1846 #if defined(CONFIG_MEDIA_CONTROLLER) 1847 state->pads[DEMOD_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK; 1848 state->pads[DEMOD_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE; 1849 state->pads[DEMOD_PAD_VBI_OUT].flags = MEDIA_PAD_FL_SOURCE; 1850 1851 sd->entity.function = MEDIA_ENT_F_ATV_DECODER; 1852 1853 ret = media_entity_pads_init(&sd->entity, DEMOD_NUM_PADS, state->pads); 1854 if (ret < 0) 1855 return ret; 1856 #endif 1857 1858 v4l_info(client, "%s found @ 0x%x (%s)\n", name, 1859 client->addr << 1, client->adapter->name); 1860 hdl = &state->hdl; 1861 v4l2_ctrl_handler_init(hdl, 6); 1862 /* add in ascending ID order */ 1863 v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, 1864 V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); 1865 v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, 1866 V4L2_CID_CONTRAST, 0, 127, 1, 64); 1867 v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, 1868 V4L2_CID_SATURATION, 0, 127, 1, 64); 1869 v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, 1870 V4L2_CID_HUE, -128, 127, 1, 0); 1871 state->agc = v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, 1872 V4L2_CID_CHROMA_AGC, 0, 1, 1, 1); 1873 state->gain = v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, 1874 V4L2_CID_CHROMA_GAIN, 0, 127, 1, 40); 1875 sd->ctrl_handler = hdl; 1876 if (hdl->error) { 1877 int err = hdl->error; 1878 1879 v4l2_ctrl_handler_free(hdl); 1880 return err; 1881 } 1882 v4l2_ctrl_auto_cluster(2, &state->agc, 0, true); 1883 1884 state->input = -1; 1885 state->output = SAA7115_IPORT_ON; 1886 state->enable = 1; 1887 state->radio = 0; 1888 state->ident = ident; 1889 1890 state->audclk_freq = 48000; 1891 1892 v4l2_dbg(1, debug, sd, "writing init values\n"); 1893 1894 /* init to 60hz/48khz */ 1895 state->crystal_freq = SAA7115_FREQ_24_576_MHZ; 1896 pdata = client->dev.platform_data; 1897 switch (state->ident) { 1898 case SAA7111: 1899 case SAA7111A: 1900 saa711x_writeregs(sd, saa7111_init); 1901 break; 1902 case GM7113C: 1903 saa711x_writeregs(sd, gm7113c_init); 1904 break; 1905 case SAA7113: 1906 if (pdata && pdata->saa7113_force_gm7113c_init) 1907 saa711x_writeregs(sd, gm7113c_init); 1908 else 1909 saa711x_writeregs(sd, saa7113_init); 1910 break; 1911 default: 1912 state->crystal_freq = SAA7115_FREQ_32_11_MHZ; 1913 saa711x_writeregs(sd, saa7115_init_auto_input); 1914 } 1915 if (state->ident > SAA7111A && state->ident != GM7113C) 1916 saa711x_writeregs(sd, saa7115_init_misc); 1917 1918 if (pdata) 1919 saa711x_write_platform_data(state, pdata); 1920 1921 saa711x_set_v4lstd(sd, V4L2_STD_NTSC); 1922 v4l2_ctrl_handler_setup(hdl); 1923 1924 v4l2_dbg(1, debug, sd, "status: (1E) 0x%02x, (1F) 0x%02x\n", 1925 saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC), 1926 saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC)); 1927 return 0; 1928 } 1929 1930 /* ----------------------------------------------------------------------- */ 1931 1932 static int saa711x_remove(struct i2c_client *client) 1933 { 1934 struct v4l2_subdev *sd = i2c_get_clientdata(client); 1935 1936 v4l2_device_unregister_subdev(sd); 1937 v4l2_ctrl_handler_free(sd->ctrl_handler); 1938 return 0; 1939 } 1940 1941 static const struct i2c_device_id saa711x_id[] = { 1942 { "saa7115_auto", 1 }, /* autodetect */ 1943 { "saa7111", 0 }, 1944 { "saa7113", 0 }, 1945 { "saa7114", 0 }, 1946 { "saa7115", 0 }, 1947 { "saa7118", 0 }, 1948 { "gm7113c", 0 }, 1949 { } 1950 }; 1951 MODULE_DEVICE_TABLE(i2c, saa711x_id); 1952 1953 static struct i2c_driver saa711x_driver = { 1954 .driver = { 1955 .name = "saa7115", 1956 }, 1957 .probe = saa711x_probe, 1958 .remove = saa711x_remove, 1959 .id_table = saa711x_id, 1960 }; 1961 1962 module_i2c_driver(saa711x_driver); 1963