1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * OmniVision ov9282 Camera Sensor Driver 4 * 5 * Copyright (C) 2021 Intel Corporation 6 */ 7 #include <asm/unaligned.h> 8 9 #include <linux/clk.h> 10 #include <linux/delay.h> 11 #include <linux/i2c.h> 12 #include <linux/module.h> 13 #include <linux/pm_runtime.h> 14 #include <linux/regulator/consumer.h> 15 16 #include <media/v4l2-ctrls.h> 17 #include <media/v4l2-event.h> 18 #include <media/v4l2-fwnode.h> 19 #include <media/v4l2-subdev.h> 20 21 /* Streaming Mode */ 22 #define OV9282_REG_MODE_SELECT 0x0100 23 #define OV9282_MODE_STANDBY 0x00 24 #define OV9282_MODE_STREAMING 0x01 25 26 #define OV9282_REG_PLL_CTRL_0D 0x030d 27 #define OV9282_PLL_CTRL_0D_RAW8 0x60 28 #define OV9282_PLL_CTRL_0D_RAW10 0x50 29 30 #define OV9282_REG_TIMING_HTS 0x380c 31 #define OV9282_TIMING_HTS_MAX 0x7fff 32 33 /* Lines per frame */ 34 #define OV9282_REG_LPFR 0x380e 35 36 /* Chip ID */ 37 #define OV9282_REG_ID 0x300a 38 #define OV9282_ID 0x9281 39 40 /* Exposure control */ 41 #define OV9282_REG_EXPOSURE 0x3500 42 #define OV9282_EXPOSURE_MIN 1 43 #define OV9282_EXPOSURE_OFFSET 12 44 #define OV9282_EXPOSURE_STEP 1 45 #define OV9282_EXPOSURE_DEFAULT 0x0282 46 47 /* Analog gain control */ 48 #define OV9282_REG_AGAIN 0x3509 49 #define OV9282_AGAIN_MIN 0x10 50 #define OV9282_AGAIN_MAX 0xff 51 #define OV9282_AGAIN_STEP 1 52 #define OV9282_AGAIN_DEFAULT 0x10 53 54 /* Group hold register */ 55 #define OV9282_REG_HOLD 0x3308 56 57 #define OV9282_REG_ANA_CORE_2 0x3662 58 #define OV9282_ANA_CORE2_RAW8 0x07 59 #define OV9282_ANA_CORE2_RAW10 0x05 60 61 #define OV9282_REG_TIMING_FORMAT_1 0x3820 62 #define OV9282_REG_TIMING_FORMAT_2 0x3821 63 #define OV9282_FLIP_BIT BIT(2) 64 65 #define OV9282_REG_MIPI_CTRL00 0x4800 66 #define OV9282_GATED_CLOCK BIT(5) 67 68 /* Input clock rate */ 69 #define OV9282_INCLK_RATE 24000000 70 71 /* CSI2 HW configuration */ 72 #define OV9282_LINK_FREQ 400000000 73 #define OV9282_NUM_DATA_LANES 2 74 75 /* Pixel rate */ 76 #define OV9282_PIXEL_RATE_10BIT (OV9282_LINK_FREQ * 2 * \ 77 OV9282_NUM_DATA_LANES / 10) 78 #define OV9282_PIXEL_RATE_8BIT (OV9282_LINK_FREQ * 2 * \ 79 OV9282_NUM_DATA_LANES / 8) 80 81 /* 82 * OV9282 native and active pixel array size. 83 * 8 dummy rows/columns on each edge of a 1280x800 active array 84 */ 85 #define OV9282_NATIVE_WIDTH 1296U 86 #define OV9282_NATIVE_HEIGHT 816U 87 #define OV9282_PIXEL_ARRAY_LEFT 8U 88 #define OV9282_PIXEL_ARRAY_TOP 8U 89 #define OV9282_PIXEL_ARRAY_WIDTH 1280U 90 #define OV9282_PIXEL_ARRAY_HEIGHT 800U 91 92 #define OV9282_REG_MIN 0x00 93 #define OV9282_REG_MAX 0xfffff 94 95 static const char * const ov9282_supply_names[] = { 96 "avdd", /* Analog power */ 97 "dovdd", /* Digital I/O power */ 98 "dvdd", /* Digital core power */ 99 }; 100 101 #define OV9282_NUM_SUPPLIES ARRAY_SIZE(ov9282_supply_names) 102 103 /** 104 * struct ov9282_reg - ov9282 sensor register 105 * @address: Register address 106 * @val: Register value 107 */ 108 struct ov9282_reg { 109 u16 address; 110 u8 val; 111 }; 112 113 /** 114 * struct ov9282_reg_list - ov9282 sensor register list 115 * @num_of_regs: Number of registers in the list 116 * @regs: Pointer to register list 117 */ 118 struct ov9282_reg_list { 119 u32 num_of_regs; 120 const struct ov9282_reg *regs; 121 }; 122 123 /** 124 * struct ov9282_mode - ov9282 sensor mode structure 125 * @width: Frame width 126 * @height: Frame height 127 * @hblank_min: Minimum horizontal blanking in lines for non-continuous[0] and 128 * continuous[1] clock modes 129 * @vblank: Vertical blanking in lines 130 * @vblank_min: Minimum vertical blanking in lines 131 * @vblank_max: Maximum vertical blanking in lines 132 * @link_freq_idx: Link frequency index 133 * @crop: on-sensor cropping for this mode 134 * @reg_list: Register list for sensor mode 135 */ 136 struct ov9282_mode { 137 u32 width; 138 u32 height; 139 u32 hblank_min[2]; 140 u32 vblank; 141 u32 vblank_min; 142 u32 vblank_max; 143 u32 link_freq_idx; 144 struct v4l2_rect crop; 145 struct ov9282_reg_list reg_list; 146 }; 147 148 /** 149 * struct ov9282 - ov9282 sensor device structure 150 * @dev: Pointer to generic device 151 * @sd: V4L2 sub-device 152 * @pad: Media pad. Only one pad supported 153 * @reset_gpio: Sensor reset gpio 154 * @inclk: Sensor input clock 155 * @supplies: Regulator supplies for the sensor 156 * @ctrl_handler: V4L2 control handler 157 * @link_freq_ctrl: Pointer to link frequency control 158 * @hblank_ctrl: Pointer to horizontal blanking control 159 * @vblank_ctrl: Pointer to vertical blanking control 160 * @exp_ctrl: Pointer to exposure control 161 * @again_ctrl: Pointer to analog gain control 162 * @pixel_rate: Pointer to pixel rate control 163 * @vblank: Vertical blanking in lines 164 * @noncontinuous_clock: Selection of CSI2 noncontinuous clock mode 165 * @cur_mode: Pointer to current selected sensor mode 166 * @code: Mbus code currently selected 167 * @mutex: Mutex for serializing sensor controls 168 * @streaming: Flag indicating streaming state 169 */ 170 struct ov9282 { 171 struct device *dev; 172 struct v4l2_subdev sd; 173 struct media_pad pad; 174 struct gpio_desc *reset_gpio; 175 struct clk *inclk; 176 struct regulator_bulk_data supplies[OV9282_NUM_SUPPLIES]; 177 struct v4l2_ctrl_handler ctrl_handler; 178 struct v4l2_ctrl *link_freq_ctrl; 179 struct v4l2_ctrl *hblank_ctrl; 180 struct v4l2_ctrl *vblank_ctrl; 181 struct { 182 struct v4l2_ctrl *exp_ctrl; 183 struct v4l2_ctrl *again_ctrl; 184 }; 185 struct v4l2_ctrl *pixel_rate; 186 u32 vblank; 187 bool noncontinuous_clock; 188 const struct ov9282_mode *cur_mode; 189 u32 code; 190 struct mutex mutex; 191 bool streaming; 192 }; 193 194 static const s64 link_freq[] = { 195 OV9282_LINK_FREQ, 196 }; 197 198 /* 199 * Common registers 200 * 201 * Note: Do NOT include a software reset (0x0103, 0x01) in any of these 202 * register arrays as some settings are written as part of ov9282_power_on, 203 * and the reset will clear them. 204 */ 205 static const struct ov9282_reg common_regs[] = { 206 {0x0302, 0x32}, 207 {0x030e, 0x02}, 208 {0x3001, 0x00}, 209 {0x3004, 0x00}, 210 {0x3005, 0x00}, 211 {0x3006, 0x04}, 212 {0x3011, 0x0a}, 213 {0x3013, 0x18}, 214 {0x301c, 0xf0}, 215 {0x3022, 0x01}, 216 {0x3030, 0x10}, 217 {0x3039, 0x32}, 218 {0x303a, 0x00}, 219 {0x3503, 0x08}, 220 {0x3505, 0x8c}, 221 {0x3507, 0x03}, 222 {0x3508, 0x00}, 223 {0x3610, 0x80}, 224 {0x3611, 0xa0}, 225 {0x3620, 0x6e}, 226 {0x3632, 0x56}, 227 {0x3633, 0x78}, 228 {0x3666, 0x00}, 229 {0x366f, 0x5a}, 230 {0x3680, 0x84}, 231 {0x3712, 0x80}, 232 {0x372d, 0x22}, 233 {0x3731, 0x80}, 234 {0x3732, 0x30}, 235 {0x377d, 0x22}, 236 {0x3788, 0x02}, 237 {0x3789, 0xa4}, 238 {0x378a, 0x00}, 239 {0x378b, 0x4a}, 240 {0x3799, 0x20}, 241 {0x3881, 0x42}, 242 {0x38a8, 0x02}, 243 {0x38a9, 0x80}, 244 {0x38b1, 0x00}, 245 {0x38c4, 0x00}, 246 {0x38c5, 0xc0}, 247 {0x38c6, 0x04}, 248 {0x38c7, 0x80}, 249 {0x3920, 0xff}, 250 {0x4010, 0x40}, 251 {0x4043, 0x40}, 252 {0x4307, 0x30}, 253 {0x4317, 0x00}, 254 {0x4501, 0x00}, 255 {0x450a, 0x08}, 256 {0x4601, 0x04}, 257 {0x470f, 0x00}, 258 {0x4f07, 0x00}, 259 {0x5000, 0x9f}, 260 {0x5001, 0x00}, 261 {0x5e00, 0x00}, 262 {0x5d00, 0x07}, 263 {0x5d01, 0x00}, 264 {0x0101, 0x01}, 265 {0x1000, 0x03}, 266 {0x5a08, 0x84}, 267 }; 268 269 static struct ov9282_reg_list common_regs_list = { 270 .num_of_regs = ARRAY_SIZE(common_regs), 271 .regs = common_regs, 272 }; 273 274 #define MODE_1280_800 0 275 #define MODE_1280_720 1 276 #define MODE_640_400 2 277 278 #define DEFAULT_MODE MODE_1280_720 279 280 /* Sensor mode registers */ 281 static const struct ov9282_reg mode_1280x800_regs[] = { 282 {0x3778, 0x00}, 283 {0x3800, 0x00}, 284 {0x3801, 0x00}, 285 {0x3802, 0x00}, 286 {0x3803, 0x00}, 287 {0x3804, 0x05}, 288 {0x3805, 0x0f}, 289 {0x3806, 0x03}, 290 {0x3807, 0x2f}, 291 {0x3808, 0x05}, 292 {0x3809, 0x00}, 293 {0x380a, 0x03}, 294 {0x380b, 0x20}, 295 {0x3810, 0x00}, 296 {0x3811, 0x08}, 297 {0x3812, 0x00}, 298 {0x3813, 0x08}, 299 {0x3814, 0x11}, 300 {0x3815, 0x11}, 301 {0x3820, 0x40}, 302 {0x3821, 0x00}, 303 {0x4003, 0x40}, 304 {0x4008, 0x04}, 305 {0x4009, 0x0b}, 306 {0x400c, 0x00}, 307 {0x400d, 0x07}, 308 {0x4507, 0x00}, 309 {0x4509, 0x00}, 310 }; 311 312 static const struct ov9282_reg mode_1280x720_regs[] = { 313 {0x3778, 0x00}, 314 {0x3800, 0x00}, 315 {0x3801, 0x00}, 316 {0x3802, 0x00}, 317 {0x3803, 0x00}, 318 {0x3804, 0x05}, 319 {0x3805, 0x0f}, 320 {0x3806, 0x02}, 321 {0x3807, 0xdf}, 322 {0x3808, 0x05}, 323 {0x3809, 0x00}, 324 {0x380a, 0x02}, 325 {0x380b, 0xd0}, 326 {0x3810, 0x00}, 327 {0x3811, 0x08}, 328 {0x3812, 0x00}, 329 {0x3813, 0x08}, 330 {0x3814, 0x11}, 331 {0x3815, 0x11}, 332 {0x3820, 0x3c}, 333 {0x3821, 0x84}, 334 {0x4003, 0x40}, 335 {0x4008, 0x02}, 336 {0x4009, 0x05}, 337 {0x400c, 0x00}, 338 {0x400d, 0x03}, 339 {0x4507, 0x00}, 340 {0x4509, 0x80}, 341 }; 342 343 static const struct ov9282_reg mode_640x400_regs[] = { 344 {0x3778, 0x10}, 345 {0x3800, 0x00}, 346 {0x3801, 0x00}, 347 {0x3802, 0x00}, 348 {0x3803, 0x00}, 349 {0x3804, 0x05}, 350 {0x3805, 0x0f}, 351 {0x3806, 0x03}, 352 {0x3807, 0x2f}, 353 {0x3808, 0x02}, 354 {0x3809, 0x80}, 355 {0x380a, 0x01}, 356 {0x380b, 0x90}, 357 {0x3810, 0x00}, 358 {0x3811, 0x04}, 359 {0x3812, 0x00}, 360 {0x3813, 0x04}, 361 {0x3814, 0x31}, 362 {0x3815, 0x22}, 363 {0x3820, 0x60}, 364 {0x3821, 0x01}, 365 {0x4008, 0x02}, 366 {0x4009, 0x05}, 367 {0x400c, 0x00}, 368 {0x400d, 0x03}, 369 {0x4507, 0x03}, 370 {0x4509, 0x80}, 371 }; 372 373 /* Supported sensor mode configurations */ 374 static const struct ov9282_mode supported_modes[] = { 375 [MODE_1280_800] = { 376 .width = 1280, 377 .height = 800, 378 .hblank_min = { 250, 176 }, 379 .vblank = 1022, 380 .vblank_min = 110, 381 .vblank_max = 51540, 382 .link_freq_idx = 0, 383 .crop = { 384 .left = OV9282_PIXEL_ARRAY_LEFT, 385 .top = OV9282_PIXEL_ARRAY_TOP, 386 .width = 1280, 387 .height = 800 388 }, 389 .reg_list = { 390 .num_of_regs = ARRAY_SIZE(mode_1280x800_regs), 391 .regs = mode_1280x800_regs, 392 }, 393 }, 394 [MODE_1280_720] = { 395 .width = 1280, 396 .height = 720, 397 .hblank_min = { 250, 176 }, 398 .vblank = 1022, 399 .vblank_min = 41, 400 .vblank_max = 51540, 401 .link_freq_idx = 0, 402 .crop = { 403 /* 404 * Note that this mode takes the top 720 lines from the 405 * 800 of the sensor. It does not take a middle crop. 406 */ 407 .left = OV9282_PIXEL_ARRAY_LEFT, 408 .top = OV9282_PIXEL_ARRAY_TOP, 409 .width = 1280, 410 .height = 720 411 }, 412 .reg_list = { 413 .num_of_regs = ARRAY_SIZE(mode_1280x720_regs), 414 .regs = mode_1280x720_regs, 415 }, 416 }, 417 [MODE_640_400] = { 418 .width = 640, 419 .height = 400, 420 .hblank_min = { 890, 816 }, 421 .vblank = 1022, 422 .vblank_min = 22, 423 .vblank_max = 51540, 424 .link_freq_idx = 0, 425 .crop = { 426 .left = OV9282_PIXEL_ARRAY_LEFT, 427 .top = OV9282_PIXEL_ARRAY_TOP, 428 .width = 1280, 429 .height = 800 430 }, 431 .reg_list = { 432 .num_of_regs = ARRAY_SIZE(mode_640x400_regs), 433 .regs = mode_640x400_regs, 434 }, 435 }, 436 }; 437 438 /** 439 * to_ov9282() - ov9282 V4L2 sub-device to ov9282 device. 440 * @subdev: pointer to ov9282 V4L2 sub-device 441 * 442 * Return: pointer to ov9282 device 443 */ 444 static inline struct ov9282 *to_ov9282(struct v4l2_subdev *subdev) 445 { 446 return container_of(subdev, struct ov9282, sd); 447 } 448 449 /** 450 * ov9282_read_reg() - Read registers. 451 * @ov9282: pointer to ov9282 device 452 * @reg: register address 453 * @len: length of bytes to read. Max supported bytes is 4 454 * @val: pointer to register value to be filled. 455 * 456 * Return: 0 if successful, error code otherwise. 457 */ 458 static int ov9282_read_reg(struct ov9282 *ov9282, u16 reg, u32 len, u32 *val) 459 { 460 struct i2c_client *client = v4l2_get_subdevdata(&ov9282->sd); 461 struct i2c_msg msgs[2] = {0}; 462 u8 addr_buf[2] = {0}; 463 u8 data_buf[4] = {0}; 464 int ret; 465 466 if (WARN_ON(len > 4)) 467 return -EINVAL; 468 469 put_unaligned_be16(reg, addr_buf); 470 471 /* Write register address */ 472 msgs[0].addr = client->addr; 473 msgs[0].flags = 0; 474 msgs[0].len = ARRAY_SIZE(addr_buf); 475 msgs[0].buf = addr_buf; 476 477 /* Read data from register */ 478 msgs[1].addr = client->addr; 479 msgs[1].flags = I2C_M_RD; 480 msgs[1].len = len; 481 msgs[1].buf = &data_buf[4 - len]; 482 483 ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); 484 if (ret != ARRAY_SIZE(msgs)) 485 return -EIO; 486 487 *val = get_unaligned_be32(data_buf); 488 489 return 0; 490 } 491 492 /** 493 * ov9282_write_reg() - Write register 494 * @ov9282: pointer to ov9282 device 495 * @reg: register address 496 * @len: length of bytes. Max supported bytes is 4 497 * @val: register value 498 * 499 * Return: 0 if successful, error code otherwise. 500 */ 501 static int ov9282_write_reg(struct ov9282 *ov9282, u16 reg, u32 len, u32 val) 502 { 503 struct i2c_client *client = v4l2_get_subdevdata(&ov9282->sd); 504 u8 buf[6] = {0}; 505 506 if (WARN_ON(len > 4)) 507 return -EINVAL; 508 509 put_unaligned_be16(reg, buf); 510 put_unaligned_be32(val << (8 * (4 - len)), buf + 2); 511 if (i2c_master_send(client, buf, len + 2) != len + 2) 512 return -EIO; 513 514 return 0; 515 } 516 517 /** 518 * ov9282_write_regs() - Write a list of registers 519 * @ov9282: pointer to ov9282 device 520 * @regs: list of registers to be written 521 * @len: length of registers array 522 * 523 * Return: 0 if successful, error code otherwise. 524 */ 525 static int ov9282_write_regs(struct ov9282 *ov9282, 526 const struct ov9282_reg *regs, u32 len) 527 { 528 unsigned int i; 529 int ret; 530 531 for (i = 0; i < len; i++) { 532 ret = ov9282_write_reg(ov9282, regs[i].address, 1, regs[i].val); 533 if (ret) 534 return ret; 535 } 536 537 return 0; 538 } 539 540 /** 541 * ov9282_update_controls() - Update control ranges based on streaming mode 542 * @ov9282: pointer to ov9282 device 543 * @mode: pointer to ov9282_mode sensor mode 544 * @fmt: pointer to the requested mode 545 * 546 * Return: 0 if successful, error code otherwise. 547 */ 548 static int ov9282_update_controls(struct ov9282 *ov9282, 549 const struct ov9282_mode *mode, 550 const struct v4l2_subdev_format *fmt) 551 { 552 u32 hblank_min; 553 s64 pixel_rate; 554 int ret; 555 556 ret = __v4l2_ctrl_s_ctrl(ov9282->link_freq_ctrl, mode->link_freq_idx); 557 if (ret) 558 return ret; 559 560 pixel_rate = (fmt->format.code == MEDIA_BUS_FMT_Y10_1X10) ? 561 OV9282_PIXEL_RATE_10BIT : OV9282_PIXEL_RATE_8BIT; 562 ret = __v4l2_ctrl_modify_range(ov9282->pixel_rate, pixel_rate, 563 pixel_rate, 1, pixel_rate); 564 if (ret) 565 return ret; 566 567 hblank_min = mode->hblank_min[ov9282->noncontinuous_clock ? 0 : 1]; 568 ret = __v4l2_ctrl_modify_range(ov9282->hblank_ctrl, hblank_min, 569 OV9282_TIMING_HTS_MAX - mode->width, 1, 570 hblank_min); 571 if (ret) 572 return ret; 573 574 return __v4l2_ctrl_modify_range(ov9282->vblank_ctrl, mode->vblank_min, 575 mode->vblank_max, 1, mode->vblank); 576 } 577 578 /** 579 * ov9282_update_exp_gain() - Set updated exposure and gain 580 * @ov9282: pointer to ov9282 device 581 * @exposure: updated exposure value 582 * @gain: updated analog gain value 583 * 584 * Return: 0 if successful, error code otherwise. 585 */ 586 static int ov9282_update_exp_gain(struct ov9282 *ov9282, u32 exposure, u32 gain) 587 { 588 int ret; 589 590 dev_dbg(ov9282->dev, "Set exp %u, analog gain %u", 591 exposure, gain); 592 593 ret = ov9282_write_reg(ov9282, OV9282_REG_HOLD, 1, 1); 594 if (ret) 595 return ret; 596 597 ret = ov9282_write_reg(ov9282, OV9282_REG_EXPOSURE, 3, exposure << 4); 598 if (ret) 599 goto error_release_group_hold; 600 601 ret = ov9282_write_reg(ov9282, OV9282_REG_AGAIN, 1, gain); 602 603 error_release_group_hold: 604 ov9282_write_reg(ov9282, OV9282_REG_HOLD, 1, 0); 605 606 return ret; 607 } 608 609 static int ov9282_set_ctrl_hflip(struct ov9282 *ov9282, int value) 610 { 611 u32 current_val; 612 int ret = ov9282_read_reg(ov9282, OV9282_REG_TIMING_FORMAT_2, 1, 613 ¤t_val); 614 if (ret) 615 return ret; 616 617 if (value) 618 current_val |= OV9282_FLIP_BIT; 619 else 620 current_val &= ~OV9282_FLIP_BIT; 621 622 return ov9282_write_reg(ov9282, OV9282_REG_TIMING_FORMAT_2, 1, 623 current_val); 624 } 625 626 static int ov9282_set_ctrl_vflip(struct ov9282 *ov9282, int value) 627 { 628 u32 current_val; 629 int ret = ov9282_read_reg(ov9282, OV9282_REG_TIMING_FORMAT_1, 1, 630 ¤t_val); 631 if (ret) 632 return ret; 633 634 if (value) 635 current_val |= OV9282_FLIP_BIT; 636 else 637 current_val &= ~OV9282_FLIP_BIT; 638 639 return ov9282_write_reg(ov9282, OV9282_REG_TIMING_FORMAT_1, 1, 640 current_val); 641 } 642 643 /** 644 * ov9282_set_ctrl() - Set subdevice control 645 * @ctrl: pointer to v4l2_ctrl structure 646 * 647 * Supported controls: 648 * - V4L2_CID_VBLANK 649 * - cluster controls: 650 * - V4L2_CID_ANALOGUE_GAIN 651 * - V4L2_CID_EXPOSURE 652 * 653 * Return: 0 if successful, error code otherwise. 654 */ 655 static int ov9282_set_ctrl(struct v4l2_ctrl *ctrl) 656 { 657 struct ov9282 *ov9282 = 658 container_of(ctrl->handler, struct ov9282, ctrl_handler); 659 u32 analog_gain; 660 u32 exposure; 661 u32 lpfr; 662 int ret; 663 664 switch (ctrl->id) { 665 case V4L2_CID_VBLANK: 666 ov9282->vblank = ov9282->vblank_ctrl->val; 667 668 dev_dbg(ov9282->dev, "Received vblank %u, new lpfr %u", 669 ov9282->vblank, 670 ov9282->vblank + ov9282->cur_mode->height); 671 672 ret = __v4l2_ctrl_modify_range(ov9282->exp_ctrl, 673 OV9282_EXPOSURE_MIN, 674 ov9282->vblank + 675 ov9282->cur_mode->height - 676 OV9282_EXPOSURE_OFFSET, 677 1, OV9282_EXPOSURE_DEFAULT); 678 break; 679 } 680 681 /* Set controls only if sensor is in power on state */ 682 if (!pm_runtime_get_if_in_use(ov9282->dev)) 683 return 0; 684 685 switch (ctrl->id) { 686 case V4L2_CID_EXPOSURE: 687 exposure = ctrl->val; 688 analog_gain = ov9282->again_ctrl->val; 689 690 dev_dbg(ov9282->dev, "Received exp %u, analog gain %u", 691 exposure, analog_gain); 692 693 ret = ov9282_update_exp_gain(ov9282, exposure, analog_gain); 694 break; 695 case V4L2_CID_VBLANK: 696 lpfr = ov9282->vblank + ov9282->cur_mode->height; 697 ret = ov9282_write_reg(ov9282, OV9282_REG_LPFR, 2, lpfr); 698 break; 699 case V4L2_CID_HFLIP: 700 ret = ov9282_set_ctrl_hflip(ov9282, ctrl->val); 701 break; 702 case V4L2_CID_VFLIP: 703 ret = ov9282_set_ctrl_vflip(ov9282, ctrl->val); 704 break; 705 case V4L2_CID_HBLANK: 706 ret = ov9282_write_reg(ov9282, OV9282_REG_TIMING_HTS, 2, 707 (ctrl->val + ov9282->cur_mode->width) >> 1); 708 break; 709 default: 710 dev_err(ov9282->dev, "Invalid control %d", ctrl->id); 711 ret = -EINVAL; 712 } 713 714 pm_runtime_put(ov9282->dev); 715 716 return ret; 717 } 718 719 /* V4l2 subdevice control ops*/ 720 static const struct v4l2_ctrl_ops ov9282_ctrl_ops = { 721 .s_ctrl = ov9282_set_ctrl, 722 }; 723 724 /** 725 * ov9282_enum_mbus_code() - Enumerate V4L2 sub-device mbus codes 726 * @sd: pointer to ov9282 V4L2 sub-device structure 727 * @sd_state: V4L2 sub-device configuration 728 * @code: V4L2 sub-device code enumeration need to be filled 729 * 730 * Return: 0 if successful, error code otherwise. 731 */ 732 static int ov9282_enum_mbus_code(struct v4l2_subdev *sd, 733 struct v4l2_subdev_state *sd_state, 734 struct v4l2_subdev_mbus_code_enum *code) 735 { 736 switch (code->index) { 737 case 0: 738 code->code = MEDIA_BUS_FMT_Y10_1X10; 739 break; 740 case 1: 741 code->code = MEDIA_BUS_FMT_Y8_1X8; 742 break; 743 default: 744 return -EINVAL; 745 } 746 747 return 0; 748 } 749 750 /** 751 * ov9282_enum_frame_size() - Enumerate V4L2 sub-device frame sizes 752 * @sd: pointer to ov9282 V4L2 sub-device structure 753 * @sd_state: V4L2 sub-device configuration 754 * @fsize: V4L2 sub-device size enumeration need to be filled 755 * 756 * Return: 0 if successful, error code otherwise. 757 */ 758 static int ov9282_enum_frame_size(struct v4l2_subdev *sd, 759 struct v4l2_subdev_state *sd_state, 760 struct v4l2_subdev_frame_size_enum *fsize) 761 { 762 if (fsize->index >= ARRAY_SIZE(supported_modes)) 763 return -EINVAL; 764 765 if (fsize->code != MEDIA_BUS_FMT_Y10_1X10 && 766 fsize->code != MEDIA_BUS_FMT_Y8_1X8) 767 return -EINVAL; 768 769 fsize->min_width = supported_modes[fsize->index].width; 770 fsize->max_width = fsize->min_width; 771 fsize->min_height = supported_modes[fsize->index].height; 772 fsize->max_height = fsize->min_height; 773 774 return 0; 775 } 776 777 /** 778 * ov9282_fill_pad_format() - Fill subdevice pad format 779 * from selected sensor mode 780 * @ov9282: pointer to ov9282 device 781 * @mode: pointer to ov9282_mode sensor mode 782 * @code: mbus code to be stored 783 * @fmt: V4L2 sub-device format need to be filled 784 */ 785 static void ov9282_fill_pad_format(struct ov9282 *ov9282, 786 const struct ov9282_mode *mode, 787 u32 code, 788 struct v4l2_subdev_format *fmt) 789 { 790 fmt->format.width = mode->width; 791 fmt->format.height = mode->height; 792 fmt->format.code = code; 793 fmt->format.field = V4L2_FIELD_NONE; 794 fmt->format.colorspace = V4L2_COLORSPACE_RAW; 795 fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; 796 fmt->format.quantization = V4L2_QUANTIZATION_DEFAULT; 797 fmt->format.xfer_func = V4L2_XFER_FUNC_NONE; 798 } 799 800 /** 801 * ov9282_get_pad_format() - Get subdevice pad format 802 * @sd: pointer to ov9282 V4L2 sub-device structure 803 * @sd_state: V4L2 sub-device configuration 804 * @fmt: V4L2 sub-device format need to be set 805 * 806 * Return: 0 if successful, error code otherwise. 807 */ 808 static int ov9282_get_pad_format(struct v4l2_subdev *sd, 809 struct v4l2_subdev_state *sd_state, 810 struct v4l2_subdev_format *fmt) 811 { 812 struct ov9282 *ov9282 = to_ov9282(sd); 813 814 mutex_lock(&ov9282->mutex); 815 816 if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { 817 struct v4l2_mbus_framefmt *framefmt; 818 819 framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); 820 fmt->format = *framefmt; 821 } else { 822 ov9282_fill_pad_format(ov9282, ov9282->cur_mode, ov9282->code, 823 fmt); 824 } 825 826 mutex_unlock(&ov9282->mutex); 827 828 return 0; 829 } 830 831 /** 832 * ov9282_set_pad_format() - Set subdevice pad format 833 * @sd: pointer to ov9282 V4L2 sub-device structure 834 * @sd_state: V4L2 sub-device configuration 835 * @fmt: V4L2 sub-device format need to be set 836 * 837 * Return: 0 if successful, error code otherwise. 838 */ 839 static int ov9282_set_pad_format(struct v4l2_subdev *sd, 840 struct v4l2_subdev_state *sd_state, 841 struct v4l2_subdev_format *fmt) 842 { 843 struct ov9282 *ov9282 = to_ov9282(sd); 844 const struct ov9282_mode *mode; 845 u32 code; 846 int ret = 0; 847 848 mutex_lock(&ov9282->mutex); 849 850 mode = v4l2_find_nearest_size(supported_modes, 851 ARRAY_SIZE(supported_modes), 852 width, height, 853 fmt->format.width, 854 fmt->format.height); 855 if (fmt->format.code == MEDIA_BUS_FMT_Y8_1X8) 856 code = MEDIA_BUS_FMT_Y8_1X8; 857 else 858 code = MEDIA_BUS_FMT_Y10_1X10; 859 860 ov9282_fill_pad_format(ov9282, mode, code, fmt); 861 862 if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { 863 struct v4l2_mbus_framefmt *framefmt; 864 865 framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); 866 *framefmt = fmt->format; 867 } else { 868 ret = ov9282_update_controls(ov9282, mode, fmt); 869 if (!ret) { 870 ov9282->cur_mode = mode; 871 ov9282->code = code; 872 } 873 } 874 875 mutex_unlock(&ov9282->mutex); 876 877 return ret; 878 } 879 880 /** 881 * ov9282_init_pad_cfg() - Initialize sub-device pad configuration 882 * @sd: pointer to ov9282 V4L2 sub-device structure 883 * @sd_state: V4L2 sub-device configuration 884 * 885 * Return: 0 if successful, error code otherwise. 886 */ 887 static int ov9282_init_pad_cfg(struct v4l2_subdev *sd, 888 struct v4l2_subdev_state *sd_state) 889 { 890 struct ov9282 *ov9282 = to_ov9282(sd); 891 struct v4l2_subdev_format fmt = { 0 }; 892 893 fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; 894 ov9282_fill_pad_format(ov9282, &supported_modes[DEFAULT_MODE], 895 ov9282->code, &fmt); 896 897 return ov9282_set_pad_format(sd, sd_state, &fmt); 898 } 899 900 static const struct v4l2_rect * 901 __ov9282_get_pad_crop(struct ov9282 *ov9282, 902 struct v4l2_subdev_state *sd_state, 903 unsigned int pad, enum v4l2_subdev_format_whence which) 904 { 905 switch (which) { 906 case V4L2_SUBDEV_FORMAT_TRY: 907 return v4l2_subdev_get_try_crop(&ov9282->sd, sd_state, pad); 908 case V4L2_SUBDEV_FORMAT_ACTIVE: 909 return &ov9282->cur_mode->crop; 910 } 911 912 return NULL; 913 } 914 915 static int ov9282_get_selection(struct v4l2_subdev *sd, 916 struct v4l2_subdev_state *sd_state, 917 struct v4l2_subdev_selection *sel) 918 { 919 switch (sel->target) { 920 case V4L2_SEL_TGT_CROP: { 921 struct ov9282 *ov9282 = to_ov9282(sd); 922 923 mutex_lock(&ov9282->mutex); 924 sel->r = *__ov9282_get_pad_crop(ov9282, sd_state, sel->pad, 925 sel->which); 926 mutex_unlock(&ov9282->mutex); 927 928 return 0; 929 } 930 931 case V4L2_SEL_TGT_NATIVE_SIZE: 932 sel->r.top = 0; 933 sel->r.left = 0; 934 sel->r.width = OV9282_NATIVE_WIDTH; 935 sel->r.height = OV9282_NATIVE_HEIGHT; 936 937 return 0; 938 939 case V4L2_SEL_TGT_CROP_DEFAULT: 940 case V4L2_SEL_TGT_CROP_BOUNDS: 941 sel->r.top = OV9282_PIXEL_ARRAY_TOP; 942 sel->r.left = OV9282_PIXEL_ARRAY_LEFT; 943 sel->r.width = OV9282_PIXEL_ARRAY_WIDTH; 944 sel->r.height = OV9282_PIXEL_ARRAY_HEIGHT; 945 946 return 0; 947 } 948 949 return -EINVAL; 950 } 951 952 /** 953 * ov9282_start_streaming() - Start sensor stream 954 * @ov9282: pointer to ov9282 device 955 * 956 * Return: 0 if successful, error code otherwise. 957 */ 958 static int ov9282_start_streaming(struct ov9282 *ov9282) 959 { 960 const struct ov9282_reg bitdepth_regs[2][2] = { 961 { 962 {OV9282_REG_PLL_CTRL_0D, OV9282_PLL_CTRL_0D_RAW10}, 963 {OV9282_REG_ANA_CORE_2, OV9282_ANA_CORE2_RAW10}, 964 }, { 965 {OV9282_REG_PLL_CTRL_0D, OV9282_PLL_CTRL_0D_RAW8}, 966 {OV9282_REG_ANA_CORE_2, OV9282_ANA_CORE2_RAW8}, 967 } 968 }; 969 const struct ov9282_reg_list *reg_list; 970 int bitdepth_index; 971 int ret; 972 973 /* Write common registers */ 974 ret = ov9282_write_regs(ov9282, common_regs_list.regs, 975 common_regs_list.num_of_regs); 976 if (ret) { 977 dev_err(ov9282->dev, "fail to write common registers"); 978 return ret; 979 } 980 981 bitdepth_index = ov9282->code == MEDIA_BUS_FMT_Y10_1X10 ? 0 : 1; 982 ret = ov9282_write_regs(ov9282, bitdepth_regs[bitdepth_index], 2); 983 if (ret) { 984 dev_err(ov9282->dev, "fail to write bitdepth regs"); 985 return ret; 986 } 987 988 /* Write sensor mode registers */ 989 reg_list = &ov9282->cur_mode->reg_list; 990 ret = ov9282_write_regs(ov9282, reg_list->regs, reg_list->num_of_regs); 991 if (ret) { 992 dev_err(ov9282->dev, "fail to write initial registers"); 993 return ret; 994 } 995 996 /* Setup handler will write actual exposure and gain */ 997 ret = __v4l2_ctrl_handler_setup(ov9282->sd.ctrl_handler); 998 if (ret) { 999 dev_err(ov9282->dev, "fail to setup handler"); 1000 return ret; 1001 } 1002 1003 /* Start streaming */ 1004 ret = ov9282_write_reg(ov9282, OV9282_REG_MODE_SELECT, 1005 1, OV9282_MODE_STREAMING); 1006 if (ret) { 1007 dev_err(ov9282->dev, "fail to start streaming"); 1008 return ret; 1009 } 1010 1011 return 0; 1012 } 1013 1014 /** 1015 * ov9282_stop_streaming() - Stop sensor stream 1016 * @ov9282: pointer to ov9282 device 1017 * 1018 * Return: 0 if successful, error code otherwise. 1019 */ 1020 static int ov9282_stop_streaming(struct ov9282 *ov9282) 1021 { 1022 return ov9282_write_reg(ov9282, OV9282_REG_MODE_SELECT, 1023 1, OV9282_MODE_STANDBY); 1024 } 1025 1026 /** 1027 * ov9282_set_stream() - Enable sensor streaming 1028 * @sd: pointer to ov9282 subdevice 1029 * @enable: set to enable sensor streaming 1030 * 1031 * Return: 0 if successful, error code otherwise. 1032 */ 1033 static int ov9282_set_stream(struct v4l2_subdev *sd, int enable) 1034 { 1035 struct ov9282 *ov9282 = to_ov9282(sd); 1036 int ret; 1037 1038 mutex_lock(&ov9282->mutex); 1039 1040 if (ov9282->streaming == enable) { 1041 mutex_unlock(&ov9282->mutex); 1042 return 0; 1043 } 1044 1045 if (enable) { 1046 ret = pm_runtime_resume_and_get(ov9282->dev); 1047 if (ret) 1048 goto error_unlock; 1049 1050 ret = ov9282_start_streaming(ov9282); 1051 if (ret) 1052 goto error_power_off; 1053 } else { 1054 ov9282_stop_streaming(ov9282); 1055 pm_runtime_put(ov9282->dev); 1056 } 1057 1058 ov9282->streaming = enable; 1059 1060 mutex_unlock(&ov9282->mutex); 1061 1062 return 0; 1063 1064 error_power_off: 1065 pm_runtime_put(ov9282->dev); 1066 error_unlock: 1067 mutex_unlock(&ov9282->mutex); 1068 1069 return ret; 1070 } 1071 1072 /** 1073 * ov9282_detect() - Detect ov9282 sensor 1074 * @ov9282: pointer to ov9282 device 1075 * 1076 * Return: 0 if successful, -EIO if sensor id does not match 1077 */ 1078 static int ov9282_detect(struct ov9282 *ov9282) 1079 { 1080 int ret; 1081 u32 val; 1082 1083 ret = ov9282_read_reg(ov9282, OV9282_REG_ID, 2, &val); 1084 if (ret) 1085 return ret; 1086 1087 if (val != OV9282_ID) { 1088 dev_err(ov9282->dev, "chip id mismatch: %x!=%x", 1089 OV9282_ID, val); 1090 return -ENXIO; 1091 } 1092 1093 return 0; 1094 } 1095 1096 static int ov9282_configure_regulators(struct ov9282 *ov9282) 1097 { 1098 unsigned int i; 1099 1100 for (i = 0; i < OV9282_NUM_SUPPLIES; i++) 1101 ov9282->supplies[i].supply = ov9282_supply_names[i]; 1102 1103 return devm_regulator_bulk_get(ov9282->dev, 1104 OV9282_NUM_SUPPLIES, 1105 ov9282->supplies); 1106 } 1107 1108 /** 1109 * ov9282_parse_hw_config() - Parse HW configuration and check if supported 1110 * @ov9282: pointer to ov9282 device 1111 * 1112 * Return: 0 if successful, error code otherwise. 1113 */ 1114 static int ov9282_parse_hw_config(struct ov9282 *ov9282) 1115 { 1116 struct fwnode_handle *fwnode = dev_fwnode(ov9282->dev); 1117 struct v4l2_fwnode_endpoint bus_cfg = { 1118 .bus_type = V4L2_MBUS_CSI2_DPHY 1119 }; 1120 struct fwnode_handle *ep; 1121 unsigned long rate; 1122 unsigned int i; 1123 int ret; 1124 1125 if (!fwnode) 1126 return -ENXIO; 1127 1128 /* Request optional reset pin */ 1129 ov9282->reset_gpio = devm_gpiod_get_optional(ov9282->dev, "reset", 1130 GPIOD_OUT_LOW); 1131 if (IS_ERR(ov9282->reset_gpio)) { 1132 dev_err(ov9282->dev, "failed to get reset gpio %ld", 1133 PTR_ERR(ov9282->reset_gpio)); 1134 return PTR_ERR(ov9282->reset_gpio); 1135 } 1136 1137 /* Get sensor input clock */ 1138 ov9282->inclk = devm_clk_get(ov9282->dev, NULL); 1139 if (IS_ERR(ov9282->inclk)) { 1140 dev_err(ov9282->dev, "could not get inclk"); 1141 return PTR_ERR(ov9282->inclk); 1142 } 1143 1144 ret = ov9282_configure_regulators(ov9282); 1145 if (ret) 1146 return dev_err_probe(ov9282->dev, ret, 1147 "Failed to get power regulators\n"); 1148 1149 rate = clk_get_rate(ov9282->inclk); 1150 if (rate != OV9282_INCLK_RATE) { 1151 dev_err(ov9282->dev, "inclk frequency mismatch"); 1152 return -EINVAL; 1153 } 1154 1155 ep = fwnode_graph_get_next_endpoint(fwnode, NULL); 1156 if (!ep) 1157 return -ENXIO; 1158 1159 ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); 1160 fwnode_handle_put(ep); 1161 if (ret) 1162 return ret; 1163 1164 ov9282->noncontinuous_clock = 1165 bus_cfg.bus.mipi_csi2.flags & V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK; 1166 1167 if (bus_cfg.bus.mipi_csi2.num_data_lanes != OV9282_NUM_DATA_LANES) { 1168 dev_err(ov9282->dev, 1169 "number of CSI2 data lanes %d is not supported", 1170 bus_cfg.bus.mipi_csi2.num_data_lanes); 1171 ret = -EINVAL; 1172 goto done_endpoint_free; 1173 } 1174 1175 if (!bus_cfg.nr_of_link_frequencies) { 1176 dev_err(ov9282->dev, "no link frequencies defined"); 1177 ret = -EINVAL; 1178 goto done_endpoint_free; 1179 } 1180 1181 for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++) 1182 if (bus_cfg.link_frequencies[i] == OV9282_LINK_FREQ) 1183 goto done_endpoint_free; 1184 1185 ret = -EINVAL; 1186 1187 done_endpoint_free: 1188 v4l2_fwnode_endpoint_free(&bus_cfg); 1189 1190 return ret; 1191 } 1192 1193 /* V4l2 subdevice ops */ 1194 static const struct v4l2_subdev_core_ops ov9282_core_ops = { 1195 .subscribe_event = v4l2_ctrl_subdev_subscribe_event, 1196 .unsubscribe_event = v4l2_event_subdev_unsubscribe, 1197 }; 1198 1199 static const struct v4l2_subdev_video_ops ov9282_video_ops = { 1200 .s_stream = ov9282_set_stream, 1201 }; 1202 1203 static const struct v4l2_subdev_pad_ops ov9282_pad_ops = { 1204 .init_cfg = ov9282_init_pad_cfg, 1205 .enum_mbus_code = ov9282_enum_mbus_code, 1206 .enum_frame_size = ov9282_enum_frame_size, 1207 .get_fmt = ov9282_get_pad_format, 1208 .set_fmt = ov9282_set_pad_format, 1209 .get_selection = ov9282_get_selection, 1210 }; 1211 1212 static const struct v4l2_subdev_ops ov9282_subdev_ops = { 1213 .core = &ov9282_core_ops, 1214 .video = &ov9282_video_ops, 1215 .pad = &ov9282_pad_ops, 1216 }; 1217 1218 /** 1219 * ov9282_power_on() - Sensor power on sequence 1220 * @dev: pointer to i2c device 1221 * 1222 * Return: 0 if successful, error code otherwise. 1223 */ 1224 static int ov9282_power_on(struct device *dev) 1225 { 1226 struct v4l2_subdev *sd = dev_get_drvdata(dev); 1227 struct ov9282 *ov9282 = to_ov9282(sd); 1228 int ret; 1229 1230 ret = regulator_bulk_enable(OV9282_NUM_SUPPLIES, ov9282->supplies); 1231 if (ret < 0) { 1232 dev_err(dev, "Failed to enable regulators\n"); 1233 return ret; 1234 } 1235 1236 usleep_range(400, 600); 1237 1238 gpiod_set_value_cansleep(ov9282->reset_gpio, 1); 1239 1240 ret = clk_prepare_enable(ov9282->inclk); 1241 if (ret) { 1242 dev_err(ov9282->dev, "fail to enable inclk"); 1243 goto error_reset; 1244 } 1245 1246 usleep_range(400, 600); 1247 1248 ret = ov9282_write_reg(ov9282, OV9282_REG_MIPI_CTRL00, 1, 1249 ov9282->noncontinuous_clock ? 1250 OV9282_GATED_CLOCK : 0); 1251 if (ret) { 1252 dev_err(ov9282->dev, "fail to write MIPI_CTRL00"); 1253 goto error_clk; 1254 } 1255 1256 return 0; 1257 1258 error_clk: 1259 clk_disable_unprepare(ov9282->inclk); 1260 error_reset: 1261 gpiod_set_value_cansleep(ov9282->reset_gpio, 0); 1262 1263 regulator_bulk_disable(OV9282_NUM_SUPPLIES, ov9282->supplies); 1264 1265 return ret; 1266 } 1267 1268 /** 1269 * ov9282_power_off() - Sensor power off sequence 1270 * @dev: pointer to i2c device 1271 * 1272 * Return: 0 if successful, error code otherwise. 1273 */ 1274 static int ov9282_power_off(struct device *dev) 1275 { 1276 struct v4l2_subdev *sd = dev_get_drvdata(dev); 1277 struct ov9282 *ov9282 = to_ov9282(sd); 1278 1279 gpiod_set_value_cansleep(ov9282->reset_gpio, 0); 1280 1281 clk_disable_unprepare(ov9282->inclk); 1282 1283 regulator_bulk_disable(OV9282_NUM_SUPPLIES, ov9282->supplies); 1284 1285 return 0; 1286 } 1287 1288 /** 1289 * ov9282_init_controls() - Initialize sensor subdevice controls 1290 * @ov9282: pointer to ov9282 device 1291 * 1292 * Return: 0 if successful, error code otherwise. 1293 */ 1294 static int ov9282_init_controls(struct ov9282 *ov9282) 1295 { 1296 struct v4l2_ctrl_handler *ctrl_hdlr = &ov9282->ctrl_handler; 1297 const struct ov9282_mode *mode = ov9282->cur_mode; 1298 struct v4l2_fwnode_device_properties props; 1299 u32 hblank_min; 1300 u32 lpfr; 1301 int ret; 1302 1303 ret = v4l2_ctrl_handler_init(ctrl_hdlr, 10); 1304 if (ret) 1305 return ret; 1306 1307 /* Serialize controls with sensor device */ 1308 ctrl_hdlr->lock = &ov9282->mutex; 1309 1310 /* Initialize exposure and gain */ 1311 lpfr = mode->vblank + mode->height; 1312 ov9282->exp_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, 1313 &ov9282_ctrl_ops, 1314 V4L2_CID_EXPOSURE, 1315 OV9282_EXPOSURE_MIN, 1316 lpfr - OV9282_EXPOSURE_OFFSET, 1317 OV9282_EXPOSURE_STEP, 1318 OV9282_EXPOSURE_DEFAULT); 1319 1320 ov9282->again_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, 1321 &ov9282_ctrl_ops, 1322 V4L2_CID_ANALOGUE_GAIN, 1323 OV9282_AGAIN_MIN, 1324 OV9282_AGAIN_MAX, 1325 OV9282_AGAIN_STEP, 1326 OV9282_AGAIN_DEFAULT); 1327 1328 v4l2_ctrl_cluster(2, &ov9282->exp_ctrl); 1329 1330 ov9282->vblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, 1331 &ov9282_ctrl_ops, 1332 V4L2_CID_VBLANK, 1333 mode->vblank_min, 1334 mode->vblank_max, 1335 1, mode->vblank); 1336 1337 v4l2_ctrl_new_std(ctrl_hdlr, &ov9282_ctrl_ops, V4L2_CID_VFLIP, 1338 0, 1, 1, 1); 1339 1340 v4l2_ctrl_new_std(ctrl_hdlr, &ov9282_ctrl_ops, V4L2_CID_HFLIP, 1341 0, 1, 1, 1); 1342 1343 /* Read only controls */ 1344 ov9282->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &ov9282_ctrl_ops, 1345 V4L2_CID_PIXEL_RATE, 1346 OV9282_PIXEL_RATE_10BIT, 1347 OV9282_PIXEL_RATE_10BIT, 1, 1348 OV9282_PIXEL_RATE_10BIT); 1349 1350 ov9282->link_freq_ctrl = v4l2_ctrl_new_int_menu(ctrl_hdlr, 1351 &ov9282_ctrl_ops, 1352 V4L2_CID_LINK_FREQ, 1353 ARRAY_SIZE(link_freq) - 1354 1, 1355 mode->link_freq_idx, 1356 link_freq); 1357 if (ov9282->link_freq_ctrl) 1358 ov9282->link_freq_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; 1359 1360 hblank_min = mode->hblank_min[ov9282->noncontinuous_clock ? 0 : 1]; 1361 ov9282->hblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, 1362 &ov9282_ctrl_ops, 1363 V4L2_CID_HBLANK, 1364 hblank_min, 1365 OV9282_TIMING_HTS_MAX - mode->width, 1366 1, hblank_min); 1367 1368 ret = v4l2_fwnode_device_parse(ov9282->dev, &props); 1369 if (!ret) { 1370 /* Failure sets ctrl_hdlr->error, which we check afterwards anyway */ 1371 v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, &ov9282_ctrl_ops, 1372 &props); 1373 } 1374 1375 if (ctrl_hdlr->error || ret) { 1376 dev_err(ov9282->dev, "control init failed: %d", 1377 ctrl_hdlr->error); 1378 v4l2_ctrl_handler_free(ctrl_hdlr); 1379 return ctrl_hdlr->error; 1380 } 1381 1382 ov9282->sd.ctrl_handler = ctrl_hdlr; 1383 1384 return 0; 1385 } 1386 1387 /** 1388 * ov9282_probe() - I2C client device binding 1389 * @client: pointer to i2c client device 1390 * 1391 * Return: 0 if successful, error code otherwise. 1392 */ 1393 static int ov9282_probe(struct i2c_client *client) 1394 { 1395 struct ov9282 *ov9282; 1396 int ret; 1397 1398 ov9282 = devm_kzalloc(&client->dev, sizeof(*ov9282), GFP_KERNEL); 1399 if (!ov9282) 1400 return -ENOMEM; 1401 1402 ov9282->dev = &client->dev; 1403 1404 /* Initialize subdev */ 1405 v4l2_i2c_subdev_init(&ov9282->sd, client, &ov9282_subdev_ops); 1406 v4l2_i2c_subdev_set_name(&ov9282->sd, client, 1407 device_get_match_data(ov9282->dev), NULL); 1408 1409 ret = ov9282_parse_hw_config(ov9282); 1410 if (ret) { 1411 dev_err(ov9282->dev, "HW configuration is not supported"); 1412 return ret; 1413 } 1414 1415 mutex_init(&ov9282->mutex); 1416 1417 ret = ov9282_power_on(ov9282->dev); 1418 if (ret) { 1419 dev_err(ov9282->dev, "failed to power-on the sensor"); 1420 goto error_mutex_destroy; 1421 } 1422 1423 /* Check module identity */ 1424 ret = ov9282_detect(ov9282); 1425 if (ret) { 1426 dev_err(ov9282->dev, "failed to find sensor: %d", ret); 1427 goto error_power_off; 1428 } 1429 1430 /* Set default mode to first mode */ 1431 ov9282->cur_mode = &supported_modes[DEFAULT_MODE]; 1432 ov9282->code = MEDIA_BUS_FMT_Y10_1X10; 1433 ov9282->vblank = ov9282->cur_mode->vblank; 1434 1435 ret = ov9282_init_controls(ov9282); 1436 if (ret) { 1437 dev_err(ov9282->dev, "failed to init controls: %d", ret); 1438 goto error_power_off; 1439 } 1440 1441 /* Initialize subdev */ 1442 ov9282->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | 1443 V4L2_SUBDEV_FL_HAS_EVENTS; 1444 ov9282->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; 1445 1446 /* Initialize source pad */ 1447 ov9282->pad.flags = MEDIA_PAD_FL_SOURCE; 1448 ret = media_entity_pads_init(&ov9282->sd.entity, 1, &ov9282->pad); 1449 if (ret) { 1450 dev_err(ov9282->dev, "failed to init entity pads: %d", ret); 1451 goto error_handler_free; 1452 } 1453 1454 ret = v4l2_async_register_subdev_sensor(&ov9282->sd); 1455 if (ret < 0) { 1456 dev_err(ov9282->dev, 1457 "failed to register async subdev: %d", ret); 1458 goto error_media_entity; 1459 } 1460 1461 pm_runtime_set_active(ov9282->dev); 1462 pm_runtime_enable(ov9282->dev); 1463 pm_runtime_idle(ov9282->dev); 1464 1465 return 0; 1466 1467 error_media_entity: 1468 media_entity_cleanup(&ov9282->sd.entity); 1469 error_handler_free: 1470 v4l2_ctrl_handler_free(ov9282->sd.ctrl_handler); 1471 error_power_off: 1472 ov9282_power_off(ov9282->dev); 1473 error_mutex_destroy: 1474 mutex_destroy(&ov9282->mutex); 1475 1476 return ret; 1477 } 1478 1479 /** 1480 * ov9282_remove() - I2C client device unbinding 1481 * @client: pointer to I2C client device 1482 * 1483 * Return: 0 if successful, error code otherwise. 1484 */ 1485 static void ov9282_remove(struct i2c_client *client) 1486 { 1487 struct v4l2_subdev *sd = i2c_get_clientdata(client); 1488 struct ov9282 *ov9282 = to_ov9282(sd); 1489 1490 v4l2_async_unregister_subdev(sd); 1491 media_entity_cleanup(&sd->entity); 1492 v4l2_ctrl_handler_free(sd->ctrl_handler); 1493 1494 pm_runtime_disable(&client->dev); 1495 if (!pm_runtime_status_suspended(&client->dev)) 1496 ov9282_power_off(&client->dev); 1497 pm_runtime_set_suspended(&client->dev); 1498 1499 mutex_destroy(&ov9282->mutex); 1500 } 1501 1502 static const struct dev_pm_ops ov9282_pm_ops = { 1503 SET_RUNTIME_PM_OPS(ov9282_power_off, ov9282_power_on, NULL) 1504 }; 1505 1506 static const struct of_device_id ov9282_of_match[] = { 1507 { .compatible = "ovti,ov9281", .data = "ov9281" }, 1508 { .compatible = "ovti,ov9282", .data = "ov9282" }, 1509 { } 1510 }; 1511 1512 MODULE_DEVICE_TABLE(of, ov9282_of_match); 1513 1514 static struct i2c_driver ov9282_driver = { 1515 .probe_new = ov9282_probe, 1516 .remove = ov9282_remove, 1517 .driver = { 1518 .name = "ov9282", 1519 .pm = &ov9282_pm_ops, 1520 .of_match_table = ov9282_of_match, 1521 }, 1522 }; 1523 1524 module_i2c_driver(ov9282_driver); 1525 1526 MODULE_DESCRIPTION("OmniVision ov9282 sensor driver"); 1527 MODULE_LICENSE("GPL"); 1528