1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * OmniVision ov9282 Camera Sensor Driver 4 * 5 * Copyright (C) 2021 Intel Corporation 6 */ 7 #include <asm/unaligned.h> 8 9 #include <linux/clk.h> 10 #include <linux/delay.h> 11 #include <linux/i2c.h> 12 #include <linux/module.h> 13 #include <linux/pm_runtime.h> 14 #include <linux/regulator/consumer.h> 15 16 #include <media/v4l2-ctrls.h> 17 #include <media/v4l2-event.h> 18 #include <media/v4l2-fwnode.h> 19 #include <media/v4l2-subdev.h> 20 21 /* Streaming Mode */ 22 #define OV9282_REG_MODE_SELECT 0x0100 23 #define OV9282_MODE_STANDBY 0x00 24 #define OV9282_MODE_STREAMING 0x01 25 26 #define OV9282_REG_PLL_CTRL_0D 0x030d 27 #define OV9282_PLL_CTRL_0D_RAW8 0x60 28 #define OV9282_PLL_CTRL_0D_RAW10 0x50 29 30 #define OV9282_REG_TIMING_HTS 0x380c 31 #define OV9282_TIMING_HTS_MAX 0x7fff 32 33 /* Lines per frame */ 34 #define OV9282_REG_LPFR 0x380e 35 36 /* Chip ID */ 37 #define OV9282_REG_ID 0x300a 38 #define OV9282_ID 0x9281 39 40 /* Exposure control */ 41 #define OV9282_REG_EXPOSURE 0x3500 42 #define OV9282_EXPOSURE_MIN 1 43 #define OV9282_EXPOSURE_OFFSET 12 44 #define OV9282_EXPOSURE_STEP 1 45 #define OV9282_EXPOSURE_DEFAULT 0x0282 46 47 /* Analog gain control */ 48 #define OV9282_REG_AGAIN 0x3509 49 #define OV9282_AGAIN_MIN 0x10 50 #define OV9282_AGAIN_MAX 0xff 51 #define OV9282_AGAIN_STEP 1 52 #define OV9282_AGAIN_DEFAULT 0x10 53 54 /* Group hold register */ 55 #define OV9282_REG_HOLD 0x3308 56 57 #define OV9282_REG_ANA_CORE_2 0x3662 58 #define OV9282_ANA_CORE2_RAW8 0x07 59 #define OV9282_ANA_CORE2_RAW10 0x05 60 61 #define OV9282_REG_TIMING_FORMAT_1 0x3820 62 #define OV9282_REG_TIMING_FORMAT_2 0x3821 63 #define OV9282_FLIP_BIT BIT(2) 64 65 #define OV9282_REG_MIPI_CTRL00 0x4800 66 #define OV9282_GATED_CLOCK BIT(5) 67 68 /* Input clock rate */ 69 #define OV9282_INCLK_RATE 24000000 70 71 /* CSI2 HW configuration */ 72 #define OV9282_LINK_FREQ 400000000 73 #define OV9282_NUM_DATA_LANES 2 74 75 /* Pixel rate */ 76 #define OV9282_PIXEL_RATE_10BIT (OV9282_LINK_FREQ * 2 * \ 77 OV9282_NUM_DATA_LANES / 10) 78 #define OV9282_PIXEL_RATE_8BIT (OV9282_LINK_FREQ * 2 * \ 79 OV9282_NUM_DATA_LANES / 8) 80 81 /* 82 * OV9282 native and active pixel array size. 83 * 8 dummy rows/columns on each edge of a 1280x800 active array 84 */ 85 #define OV9282_NATIVE_WIDTH 1296U 86 #define OV9282_NATIVE_HEIGHT 816U 87 #define OV9282_PIXEL_ARRAY_LEFT 8U 88 #define OV9282_PIXEL_ARRAY_TOP 8U 89 #define OV9282_PIXEL_ARRAY_WIDTH 1280U 90 #define OV9282_PIXEL_ARRAY_HEIGHT 800U 91 92 #define OV9282_REG_MIN 0x00 93 #define OV9282_REG_MAX 0xfffff 94 95 static const char * const ov9282_supply_names[] = { 96 "avdd", /* Analog power */ 97 "dovdd", /* Digital I/O power */ 98 "dvdd", /* Digital core power */ 99 }; 100 101 #define OV9282_NUM_SUPPLIES ARRAY_SIZE(ov9282_supply_names) 102 103 /** 104 * struct ov9282_reg - ov9282 sensor register 105 * @address: Register address 106 * @val: Register value 107 */ 108 struct ov9282_reg { 109 u16 address; 110 u8 val; 111 }; 112 113 /** 114 * struct ov9282_reg_list - ov9282 sensor register list 115 * @num_of_regs: Number of registers in the list 116 * @regs: Pointer to register list 117 */ 118 struct ov9282_reg_list { 119 u32 num_of_regs; 120 const struct ov9282_reg *regs; 121 }; 122 123 /** 124 * struct ov9282_mode - ov9282 sensor mode structure 125 * @width: Frame width 126 * @height: Frame height 127 * @hblank_min: Minimum horizontal blanking in lines for non-continuous[0] and 128 * continuous[1] clock modes 129 * @vblank: Vertical blanking in lines 130 * @vblank_min: Minimum vertical blanking in lines 131 * @vblank_max: Maximum vertical blanking in lines 132 * @link_freq_idx: Link frequency index 133 * @crop: on-sensor cropping for this mode 134 * @reg_list: Register list for sensor mode 135 */ 136 struct ov9282_mode { 137 u32 width; 138 u32 height; 139 u32 hblank_min[2]; 140 u32 vblank; 141 u32 vblank_min; 142 u32 vblank_max; 143 u32 link_freq_idx; 144 struct v4l2_rect crop; 145 struct ov9282_reg_list reg_list; 146 }; 147 148 /** 149 * struct ov9282 - ov9282 sensor device structure 150 * @dev: Pointer to generic device 151 * @sd: V4L2 sub-device 152 * @pad: Media pad. Only one pad supported 153 * @reset_gpio: Sensor reset gpio 154 * @inclk: Sensor input clock 155 * @supplies: Regulator supplies for the sensor 156 * @ctrl_handler: V4L2 control handler 157 * @link_freq_ctrl: Pointer to link frequency control 158 * @hblank_ctrl: Pointer to horizontal blanking control 159 * @vblank_ctrl: Pointer to vertical blanking control 160 * @exp_ctrl: Pointer to exposure control 161 * @again_ctrl: Pointer to analog gain control 162 * @pixel_rate: Pointer to pixel rate control 163 * @vblank: Vertical blanking in lines 164 * @noncontinuous_clock: Selection of CSI2 noncontinuous clock mode 165 * @cur_mode: Pointer to current selected sensor mode 166 * @code: Mbus code currently selected 167 * @mutex: Mutex for serializing sensor controls 168 */ 169 struct ov9282 { 170 struct device *dev; 171 struct v4l2_subdev sd; 172 struct media_pad pad; 173 struct gpio_desc *reset_gpio; 174 struct clk *inclk; 175 struct regulator_bulk_data supplies[OV9282_NUM_SUPPLIES]; 176 struct v4l2_ctrl_handler ctrl_handler; 177 struct v4l2_ctrl *link_freq_ctrl; 178 struct v4l2_ctrl *hblank_ctrl; 179 struct v4l2_ctrl *vblank_ctrl; 180 struct { 181 struct v4l2_ctrl *exp_ctrl; 182 struct v4l2_ctrl *again_ctrl; 183 }; 184 struct v4l2_ctrl *pixel_rate; 185 u32 vblank; 186 bool noncontinuous_clock; 187 const struct ov9282_mode *cur_mode; 188 u32 code; 189 struct mutex mutex; 190 }; 191 192 static const s64 link_freq[] = { 193 OV9282_LINK_FREQ, 194 }; 195 196 /* 197 * Common registers 198 * 199 * Note: Do NOT include a software reset (0x0103, 0x01) in any of these 200 * register arrays as some settings are written as part of ov9282_power_on, 201 * and the reset will clear them. 202 */ 203 static const struct ov9282_reg common_regs[] = { 204 {0x0302, 0x32}, 205 {0x030e, 0x02}, 206 {0x3001, 0x00}, 207 {0x3004, 0x00}, 208 {0x3005, 0x00}, 209 {0x3006, 0x04}, 210 {0x3011, 0x0a}, 211 {0x3013, 0x18}, 212 {0x301c, 0xf0}, 213 {0x3022, 0x01}, 214 {0x3030, 0x10}, 215 {0x3039, 0x32}, 216 {0x303a, 0x00}, 217 {0x3503, 0x08}, 218 {0x3505, 0x8c}, 219 {0x3507, 0x03}, 220 {0x3508, 0x00}, 221 {0x3610, 0x80}, 222 {0x3611, 0xa0}, 223 {0x3620, 0x6e}, 224 {0x3632, 0x56}, 225 {0x3633, 0x78}, 226 {0x3666, 0x00}, 227 {0x366f, 0x5a}, 228 {0x3680, 0x84}, 229 {0x3712, 0x80}, 230 {0x372d, 0x22}, 231 {0x3731, 0x80}, 232 {0x3732, 0x30}, 233 {0x377d, 0x22}, 234 {0x3788, 0x02}, 235 {0x3789, 0xa4}, 236 {0x378a, 0x00}, 237 {0x378b, 0x4a}, 238 {0x3799, 0x20}, 239 {0x3881, 0x42}, 240 {0x38a8, 0x02}, 241 {0x38a9, 0x80}, 242 {0x38b1, 0x00}, 243 {0x38c4, 0x00}, 244 {0x38c5, 0xc0}, 245 {0x38c6, 0x04}, 246 {0x38c7, 0x80}, 247 {0x3920, 0xff}, 248 {0x4010, 0x40}, 249 {0x4043, 0x40}, 250 {0x4307, 0x30}, 251 {0x4317, 0x00}, 252 {0x4501, 0x00}, 253 {0x450a, 0x08}, 254 {0x4601, 0x04}, 255 {0x470f, 0x00}, 256 {0x4f07, 0x00}, 257 {0x5000, 0x9f}, 258 {0x5001, 0x00}, 259 {0x5e00, 0x00}, 260 {0x5d00, 0x07}, 261 {0x5d01, 0x00}, 262 {0x0101, 0x01}, 263 {0x1000, 0x03}, 264 {0x5a08, 0x84}, 265 }; 266 267 static struct ov9282_reg_list common_regs_list = { 268 .num_of_regs = ARRAY_SIZE(common_regs), 269 .regs = common_regs, 270 }; 271 272 #define MODE_1280_800 0 273 #define MODE_1280_720 1 274 #define MODE_640_400 2 275 276 #define DEFAULT_MODE MODE_1280_720 277 278 /* Sensor mode registers */ 279 static const struct ov9282_reg mode_1280x800_regs[] = { 280 {0x3778, 0x00}, 281 {0x3800, 0x00}, 282 {0x3801, 0x00}, 283 {0x3802, 0x00}, 284 {0x3803, 0x00}, 285 {0x3804, 0x05}, 286 {0x3805, 0x0f}, 287 {0x3806, 0x03}, 288 {0x3807, 0x2f}, 289 {0x3808, 0x05}, 290 {0x3809, 0x00}, 291 {0x380a, 0x03}, 292 {0x380b, 0x20}, 293 {0x3810, 0x00}, 294 {0x3811, 0x08}, 295 {0x3812, 0x00}, 296 {0x3813, 0x08}, 297 {0x3814, 0x11}, 298 {0x3815, 0x11}, 299 {0x3820, 0x40}, 300 {0x3821, 0x00}, 301 {0x4003, 0x40}, 302 {0x4008, 0x04}, 303 {0x4009, 0x0b}, 304 {0x400c, 0x00}, 305 {0x400d, 0x07}, 306 {0x4507, 0x00}, 307 {0x4509, 0x00}, 308 }; 309 310 static const struct ov9282_reg mode_1280x720_regs[] = { 311 {0x3778, 0x00}, 312 {0x3800, 0x00}, 313 {0x3801, 0x00}, 314 {0x3802, 0x00}, 315 {0x3803, 0x00}, 316 {0x3804, 0x05}, 317 {0x3805, 0x0f}, 318 {0x3806, 0x02}, 319 {0x3807, 0xdf}, 320 {0x3808, 0x05}, 321 {0x3809, 0x00}, 322 {0x380a, 0x02}, 323 {0x380b, 0xd0}, 324 {0x3810, 0x00}, 325 {0x3811, 0x08}, 326 {0x3812, 0x00}, 327 {0x3813, 0x08}, 328 {0x3814, 0x11}, 329 {0x3815, 0x11}, 330 {0x3820, 0x3c}, 331 {0x3821, 0x84}, 332 {0x4003, 0x40}, 333 {0x4008, 0x02}, 334 {0x4009, 0x05}, 335 {0x400c, 0x00}, 336 {0x400d, 0x03}, 337 {0x4507, 0x00}, 338 {0x4509, 0x80}, 339 }; 340 341 static const struct ov9282_reg mode_640x400_regs[] = { 342 {0x3778, 0x10}, 343 {0x3800, 0x00}, 344 {0x3801, 0x00}, 345 {0x3802, 0x00}, 346 {0x3803, 0x00}, 347 {0x3804, 0x05}, 348 {0x3805, 0x0f}, 349 {0x3806, 0x03}, 350 {0x3807, 0x2f}, 351 {0x3808, 0x02}, 352 {0x3809, 0x80}, 353 {0x380a, 0x01}, 354 {0x380b, 0x90}, 355 {0x3810, 0x00}, 356 {0x3811, 0x04}, 357 {0x3812, 0x00}, 358 {0x3813, 0x04}, 359 {0x3814, 0x31}, 360 {0x3815, 0x22}, 361 {0x3820, 0x60}, 362 {0x3821, 0x01}, 363 {0x4008, 0x02}, 364 {0x4009, 0x05}, 365 {0x400c, 0x00}, 366 {0x400d, 0x03}, 367 {0x4507, 0x03}, 368 {0x4509, 0x80}, 369 }; 370 371 /* Supported sensor mode configurations */ 372 static const struct ov9282_mode supported_modes[] = { 373 [MODE_1280_800] = { 374 .width = 1280, 375 .height = 800, 376 .hblank_min = { 250, 176 }, 377 .vblank = 1022, 378 .vblank_min = 110, 379 .vblank_max = 51540, 380 .link_freq_idx = 0, 381 .crop = { 382 .left = OV9282_PIXEL_ARRAY_LEFT, 383 .top = OV9282_PIXEL_ARRAY_TOP, 384 .width = 1280, 385 .height = 800 386 }, 387 .reg_list = { 388 .num_of_regs = ARRAY_SIZE(mode_1280x800_regs), 389 .regs = mode_1280x800_regs, 390 }, 391 }, 392 [MODE_1280_720] = { 393 .width = 1280, 394 .height = 720, 395 .hblank_min = { 250, 176 }, 396 .vblank = 1022, 397 .vblank_min = 41, 398 .vblank_max = 51540, 399 .link_freq_idx = 0, 400 .crop = { 401 /* 402 * Note that this mode takes the top 720 lines from the 403 * 800 of the sensor. It does not take a middle crop. 404 */ 405 .left = OV9282_PIXEL_ARRAY_LEFT, 406 .top = OV9282_PIXEL_ARRAY_TOP, 407 .width = 1280, 408 .height = 720 409 }, 410 .reg_list = { 411 .num_of_regs = ARRAY_SIZE(mode_1280x720_regs), 412 .regs = mode_1280x720_regs, 413 }, 414 }, 415 [MODE_640_400] = { 416 .width = 640, 417 .height = 400, 418 .hblank_min = { 890, 816 }, 419 .vblank = 1022, 420 .vblank_min = 22, 421 .vblank_max = 51540, 422 .link_freq_idx = 0, 423 .crop = { 424 .left = OV9282_PIXEL_ARRAY_LEFT, 425 .top = OV9282_PIXEL_ARRAY_TOP, 426 .width = 1280, 427 .height = 800 428 }, 429 .reg_list = { 430 .num_of_regs = ARRAY_SIZE(mode_640x400_regs), 431 .regs = mode_640x400_regs, 432 }, 433 }, 434 }; 435 436 /** 437 * to_ov9282() - ov9282 V4L2 sub-device to ov9282 device. 438 * @subdev: pointer to ov9282 V4L2 sub-device 439 * 440 * Return: pointer to ov9282 device 441 */ 442 static inline struct ov9282 *to_ov9282(struct v4l2_subdev *subdev) 443 { 444 return container_of(subdev, struct ov9282, sd); 445 } 446 447 /** 448 * ov9282_read_reg() - Read registers. 449 * @ov9282: pointer to ov9282 device 450 * @reg: register address 451 * @len: length of bytes to read. Max supported bytes is 4 452 * @val: pointer to register value to be filled. 453 * 454 * Return: 0 if successful, error code otherwise. 455 */ 456 static int ov9282_read_reg(struct ov9282 *ov9282, u16 reg, u32 len, u32 *val) 457 { 458 struct i2c_client *client = v4l2_get_subdevdata(&ov9282->sd); 459 struct i2c_msg msgs[2] = {0}; 460 u8 addr_buf[2] = {0}; 461 u8 data_buf[4] = {0}; 462 int ret; 463 464 if (WARN_ON(len > 4)) 465 return -EINVAL; 466 467 put_unaligned_be16(reg, addr_buf); 468 469 /* Write register address */ 470 msgs[0].addr = client->addr; 471 msgs[0].flags = 0; 472 msgs[0].len = ARRAY_SIZE(addr_buf); 473 msgs[0].buf = addr_buf; 474 475 /* Read data from register */ 476 msgs[1].addr = client->addr; 477 msgs[1].flags = I2C_M_RD; 478 msgs[1].len = len; 479 msgs[1].buf = &data_buf[4 - len]; 480 481 ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); 482 if (ret != ARRAY_SIZE(msgs)) 483 return -EIO; 484 485 *val = get_unaligned_be32(data_buf); 486 487 return 0; 488 } 489 490 /** 491 * ov9282_write_reg() - Write register 492 * @ov9282: pointer to ov9282 device 493 * @reg: register address 494 * @len: length of bytes. Max supported bytes is 4 495 * @val: register value 496 * 497 * Return: 0 if successful, error code otherwise. 498 */ 499 static int ov9282_write_reg(struct ov9282 *ov9282, u16 reg, u32 len, u32 val) 500 { 501 struct i2c_client *client = v4l2_get_subdevdata(&ov9282->sd); 502 u8 buf[6] = {0}; 503 504 if (WARN_ON(len > 4)) 505 return -EINVAL; 506 507 put_unaligned_be16(reg, buf); 508 put_unaligned_be32(val << (8 * (4 - len)), buf + 2); 509 if (i2c_master_send(client, buf, len + 2) != len + 2) 510 return -EIO; 511 512 return 0; 513 } 514 515 /** 516 * ov9282_write_regs() - Write a list of registers 517 * @ov9282: pointer to ov9282 device 518 * @regs: list of registers to be written 519 * @len: length of registers array 520 * 521 * Return: 0 if successful, error code otherwise. 522 */ 523 static int ov9282_write_regs(struct ov9282 *ov9282, 524 const struct ov9282_reg *regs, u32 len) 525 { 526 unsigned int i; 527 int ret; 528 529 for (i = 0; i < len; i++) { 530 ret = ov9282_write_reg(ov9282, regs[i].address, 1, regs[i].val); 531 if (ret) 532 return ret; 533 } 534 535 return 0; 536 } 537 538 /** 539 * ov9282_update_controls() - Update control ranges based on streaming mode 540 * @ov9282: pointer to ov9282 device 541 * @mode: pointer to ov9282_mode sensor mode 542 * @fmt: pointer to the requested mode 543 * 544 * Return: 0 if successful, error code otherwise. 545 */ 546 static int ov9282_update_controls(struct ov9282 *ov9282, 547 const struct ov9282_mode *mode, 548 const struct v4l2_subdev_format *fmt) 549 { 550 u32 hblank_min; 551 s64 pixel_rate; 552 int ret; 553 554 ret = __v4l2_ctrl_s_ctrl(ov9282->link_freq_ctrl, mode->link_freq_idx); 555 if (ret) 556 return ret; 557 558 pixel_rate = (fmt->format.code == MEDIA_BUS_FMT_Y10_1X10) ? 559 OV9282_PIXEL_RATE_10BIT : OV9282_PIXEL_RATE_8BIT; 560 ret = __v4l2_ctrl_modify_range(ov9282->pixel_rate, pixel_rate, 561 pixel_rate, 1, pixel_rate); 562 if (ret) 563 return ret; 564 565 hblank_min = mode->hblank_min[ov9282->noncontinuous_clock ? 0 : 1]; 566 ret = __v4l2_ctrl_modify_range(ov9282->hblank_ctrl, hblank_min, 567 OV9282_TIMING_HTS_MAX - mode->width, 1, 568 hblank_min); 569 if (ret) 570 return ret; 571 572 return __v4l2_ctrl_modify_range(ov9282->vblank_ctrl, mode->vblank_min, 573 mode->vblank_max, 1, mode->vblank); 574 } 575 576 /** 577 * ov9282_update_exp_gain() - Set updated exposure and gain 578 * @ov9282: pointer to ov9282 device 579 * @exposure: updated exposure value 580 * @gain: updated analog gain value 581 * 582 * Return: 0 if successful, error code otherwise. 583 */ 584 static int ov9282_update_exp_gain(struct ov9282 *ov9282, u32 exposure, u32 gain) 585 { 586 int ret; 587 588 dev_dbg(ov9282->dev, "Set exp %u, analog gain %u", 589 exposure, gain); 590 591 ret = ov9282_write_reg(ov9282, OV9282_REG_HOLD, 1, 1); 592 if (ret) 593 return ret; 594 595 ret = ov9282_write_reg(ov9282, OV9282_REG_EXPOSURE, 3, exposure << 4); 596 if (ret) 597 goto error_release_group_hold; 598 599 ret = ov9282_write_reg(ov9282, OV9282_REG_AGAIN, 1, gain); 600 601 error_release_group_hold: 602 ov9282_write_reg(ov9282, OV9282_REG_HOLD, 1, 0); 603 604 return ret; 605 } 606 607 static int ov9282_set_ctrl_hflip(struct ov9282 *ov9282, int value) 608 { 609 u32 current_val; 610 int ret = ov9282_read_reg(ov9282, OV9282_REG_TIMING_FORMAT_2, 1, 611 ¤t_val); 612 if (ret) 613 return ret; 614 615 if (value) 616 current_val |= OV9282_FLIP_BIT; 617 else 618 current_val &= ~OV9282_FLIP_BIT; 619 620 return ov9282_write_reg(ov9282, OV9282_REG_TIMING_FORMAT_2, 1, 621 current_val); 622 } 623 624 static int ov9282_set_ctrl_vflip(struct ov9282 *ov9282, int value) 625 { 626 u32 current_val; 627 int ret = ov9282_read_reg(ov9282, OV9282_REG_TIMING_FORMAT_1, 1, 628 ¤t_val); 629 if (ret) 630 return ret; 631 632 if (value) 633 current_val |= OV9282_FLIP_BIT; 634 else 635 current_val &= ~OV9282_FLIP_BIT; 636 637 return ov9282_write_reg(ov9282, OV9282_REG_TIMING_FORMAT_1, 1, 638 current_val); 639 } 640 641 /** 642 * ov9282_set_ctrl() - Set subdevice control 643 * @ctrl: pointer to v4l2_ctrl structure 644 * 645 * Supported controls: 646 * - V4L2_CID_VBLANK 647 * - cluster controls: 648 * - V4L2_CID_ANALOGUE_GAIN 649 * - V4L2_CID_EXPOSURE 650 * 651 * Return: 0 if successful, error code otherwise. 652 */ 653 static int ov9282_set_ctrl(struct v4l2_ctrl *ctrl) 654 { 655 struct ov9282 *ov9282 = 656 container_of(ctrl->handler, struct ov9282, ctrl_handler); 657 u32 analog_gain; 658 u32 exposure; 659 u32 lpfr; 660 int ret; 661 662 switch (ctrl->id) { 663 case V4L2_CID_VBLANK: 664 ov9282->vblank = ov9282->vblank_ctrl->val; 665 666 dev_dbg(ov9282->dev, "Received vblank %u, new lpfr %u", 667 ov9282->vblank, 668 ov9282->vblank + ov9282->cur_mode->height); 669 670 ret = __v4l2_ctrl_modify_range(ov9282->exp_ctrl, 671 OV9282_EXPOSURE_MIN, 672 ov9282->vblank + 673 ov9282->cur_mode->height - 674 OV9282_EXPOSURE_OFFSET, 675 1, OV9282_EXPOSURE_DEFAULT); 676 break; 677 } 678 679 /* Set controls only if sensor is in power on state */ 680 if (!pm_runtime_get_if_in_use(ov9282->dev)) 681 return 0; 682 683 switch (ctrl->id) { 684 case V4L2_CID_EXPOSURE: 685 exposure = ctrl->val; 686 analog_gain = ov9282->again_ctrl->val; 687 688 dev_dbg(ov9282->dev, "Received exp %u, analog gain %u", 689 exposure, analog_gain); 690 691 ret = ov9282_update_exp_gain(ov9282, exposure, analog_gain); 692 break; 693 case V4L2_CID_VBLANK: 694 lpfr = ov9282->vblank + ov9282->cur_mode->height; 695 ret = ov9282_write_reg(ov9282, OV9282_REG_LPFR, 2, lpfr); 696 break; 697 case V4L2_CID_HFLIP: 698 ret = ov9282_set_ctrl_hflip(ov9282, ctrl->val); 699 break; 700 case V4L2_CID_VFLIP: 701 ret = ov9282_set_ctrl_vflip(ov9282, ctrl->val); 702 break; 703 case V4L2_CID_HBLANK: 704 ret = ov9282_write_reg(ov9282, OV9282_REG_TIMING_HTS, 2, 705 (ctrl->val + ov9282->cur_mode->width) >> 1); 706 break; 707 default: 708 dev_err(ov9282->dev, "Invalid control %d", ctrl->id); 709 ret = -EINVAL; 710 } 711 712 pm_runtime_put(ov9282->dev); 713 714 return ret; 715 } 716 717 /* V4l2 subdevice control ops*/ 718 static const struct v4l2_ctrl_ops ov9282_ctrl_ops = { 719 .s_ctrl = ov9282_set_ctrl, 720 }; 721 722 /** 723 * ov9282_enum_mbus_code() - Enumerate V4L2 sub-device mbus codes 724 * @sd: pointer to ov9282 V4L2 sub-device structure 725 * @sd_state: V4L2 sub-device configuration 726 * @code: V4L2 sub-device code enumeration need to be filled 727 * 728 * Return: 0 if successful, error code otherwise. 729 */ 730 static int ov9282_enum_mbus_code(struct v4l2_subdev *sd, 731 struct v4l2_subdev_state *sd_state, 732 struct v4l2_subdev_mbus_code_enum *code) 733 { 734 switch (code->index) { 735 case 0: 736 code->code = MEDIA_BUS_FMT_Y10_1X10; 737 break; 738 case 1: 739 code->code = MEDIA_BUS_FMT_Y8_1X8; 740 break; 741 default: 742 return -EINVAL; 743 } 744 745 return 0; 746 } 747 748 /** 749 * ov9282_enum_frame_size() - Enumerate V4L2 sub-device frame sizes 750 * @sd: pointer to ov9282 V4L2 sub-device structure 751 * @sd_state: V4L2 sub-device configuration 752 * @fsize: V4L2 sub-device size enumeration need to be filled 753 * 754 * Return: 0 if successful, error code otherwise. 755 */ 756 static int ov9282_enum_frame_size(struct v4l2_subdev *sd, 757 struct v4l2_subdev_state *sd_state, 758 struct v4l2_subdev_frame_size_enum *fsize) 759 { 760 if (fsize->index >= ARRAY_SIZE(supported_modes)) 761 return -EINVAL; 762 763 if (fsize->code != MEDIA_BUS_FMT_Y10_1X10 && 764 fsize->code != MEDIA_BUS_FMT_Y8_1X8) 765 return -EINVAL; 766 767 fsize->min_width = supported_modes[fsize->index].width; 768 fsize->max_width = fsize->min_width; 769 fsize->min_height = supported_modes[fsize->index].height; 770 fsize->max_height = fsize->min_height; 771 772 return 0; 773 } 774 775 /** 776 * ov9282_fill_pad_format() - Fill subdevice pad format 777 * from selected sensor mode 778 * @ov9282: pointer to ov9282 device 779 * @mode: pointer to ov9282_mode sensor mode 780 * @code: mbus code to be stored 781 * @fmt: V4L2 sub-device format need to be filled 782 */ 783 static void ov9282_fill_pad_format(struct ov9282 *ov9282, 784 const struct ov9282_mode *mode, 785 u32 code, 786 struct v4l2_subdev_format *fmt) 787 { 788 fmt->format.width = mode->width; 789 fmt->format.height = mode->height; 790 fmt->format.code = code; 791 fmt->format.field = V4L2_FIELD_NONE; 792 fmt->format.colorspace = V4L2_COLORSPACE_RAW; 793 fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; 794 fmt->format.quantization = V4L2_QUANTIZATION_DEFAULT; 795 fmt->format.xfer_func = V4L2_XFER_FUNC_NONE; 796 } 797 798 /** 799 * ov9282_get_pad_format() - Get subdevice pad format 800 * @sd: pointer to ov9282 V4L2 sub-device structure 801 * @sd_state: V4L2 sub-device configuration 802 * @fmt: V4L2 sub-device format need to be set 803 * 804 * Return: 0 if successful, error code otherwise. 805 */ 806 static int ov9282_get_pad_format(struct v4l2_subdev *sd, 807 struct v4l2_subdev_state *sd_state, 808 struct v4l2_subdev_format *fmt) 809 { 810 struct ov9282 *ov9282 = to_ov9282(sd); 811 812 mutex_lock(&ov9282->mutex); 813 814 if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { 815 struct v4l2_mbus_framefmt *framefmt; 816 817 framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); 818 fmt->format = *framefmt; 819 } else { 820 ov9282_fill_pad_format(ov9282, ov9282->cur_mode, ov9282->code, 821 fmt); 822 } 823 824 mutex_unlock(&ov9282->mutex); 825 826 return 0; 827 } 828 829 /** 830 * ov9282_set_pad_format() - Set subdevice pad format 831 * @sd: pointer to ov9282 V4L2 sub-device structure 832 * @sd_state: V4L2 sub-device configuration 833 * @fmt: V4L2 sub-device format need to be set 834 * 835 * Return: 0 if successful, error code otherwise. 836 */ 837 static int ov9282_set_pad_format(struct v4l2_subdev *sd, 838 struct v4l2_subdev_state *sd_state, 839 struct v4l2_subdev_format *fmt) 840 { 841 struct ov9282 *ov9282 = to_ov9282(sd); 842 const struct ov9282_mode *mode; 843 u32 code; 844 int ret = 0; 845 846 mutex_lock(&ov9282->mutex); 847 848 mode = v4l2_find_nearest_size(supported_modes, 849 ARRAY_SIZE(supported_modes), 850 width, height, 851 fmt->format.width, 852 fmt->format.height); 853 if (fmt->format.code == MEDIA_BUS_FMT_Y8_1X8) 854 code = MEDIA_BUS_FMT_Y8_1X8; 855 else 856 code = MEDIA_BUS_FMT_Y10_1X10; 857 858 ov9282_fill_pad_format(ov9282, mode, code, fmt); 859 860 if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { 861 struct v4l2_mbus_framefmt *framefmt; 862 863 framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); 864 *framefmt = fmt->format; 865 } else { 866 ret = ov9282_update_controls(ov9282, mode, fmt); 867 if (!ret) { 868 ov9282->cur_mode = mode; 869 ov9282->code = code; 870 } 871 } 872 873 mutex_unlock(&ov9282->mutex); 874 875 return ret; 876 } 877 878 /** 879 * ov9282_init_pad_cfg() - Initialize sub-device pad configuration 880 * @sd: pointer to ov9282 V4L2 sub-device structure 881 * @sd_state: V4L2 sub-device configuration 882 * 883 * Return: 0 if successful, error code otherwise. 884 */ 885 static int ov9282_init_pad_cfg(struct v4l2_subdev *sd, 886 struct v4l2_subdev_state *sd_state) 887 { 888 struct ov9282 *ov9282 = to_ov9282(sd); 889 struct v4l2_subdev_format fmt = { 0 }; 890 891 fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; 892 ov9282_fill_pad_format(ov9282, &supported_modes[DEFAULT_MODE], 893 ov9282->code, &fmt); 894 895 return ov9282_set_pad_format(sd, sd_state, &fmt); 896 } 897 898 static const struct v4l2_rect * 899 __ov9282_get_pad_crop(struct ov9282 *ov9282, 900 struct v4l2_subdev_state *sd_state, 901 unsigned int pad, enum v4l2_subdev_format_whence which) 902 { 903 switch (which) { 904 case V4L2_SUBDEV_FORMAT_TRY: 905 return v4l2_subdev_get_try_crop(&ov9282->sd, sd_state, pad); 906 case V4L2_SUBDEV_FORMAT_ACTIVE: 907 return &ov9282->cur_mode->crop; 908 } 909 910 return NULL; 911 } 912 913 static int ov9282_get_selection(struct v4l2_subdev *sd, 914 struct v4l2_subdev_state *sd_state, 915 struct v4l2_subdev_selection *sel) 916 { 917 switch (sel->target) { 918 case V4L2_SEL_TGT_CROP: { 919 struct ov9282 *ov9282 = to_ov9282(sd); 920 921 mutex_lock(&ov9282->mutex); 922 sel->r = *__ov9282_get_pad_crop(ov9282, sd_state, sel->pad, 923 sel->which); 924 mutex_unlock(&ov9282->mutex); 925 926 return 0; 927 } 928 929 case V4L2_SEL_TGT_NATIVE_SIZE: 930 sel->r.top = 0; 931 sel->r.left = 0; 932 sel->r.width = OV9282_NATIVE_WIDTH; 933 sel->r.height = OV9282_NATIVE_HEIGHT; 934 935 return 0; 936 937 case V4L2_SEL_TGT_CROP_DEFAULT: 938 case V4L2_SEL_TGT_CROP_BOUNDS: 939 sel->r.top = OV9282_PIXEL_ARRAY_TOP; 940 sel->r.left = OV9282_PIXEL_ARRAY_LEFT; 941 sel->r.width = OV9282_PIXEL_ARRAY_WIDTH; 942 sel->r.height = OV9282_PIXEL_ARRAY_HEIGHT; 943 944 return 0; 945 } 946 947 return -EINVAL; 948 } 949 950 /** 951 * ov9282_start_streaming() - Start sensor stream 952 * @ov9282: pointer to ov9282 device 953 * 954 * Return: 0 if successful, error code otherwise. 955 */ 956 static int ov9282_start_streaming(struct ov9282 *ov9282) 957 { 958 const struct ov9282_reg bitdepth_regs[2][2] = { 959 { 960 {OV9282_REG_PLL_CTRL_0D, OV9282_PLL_CTRL_0D_RAW10}, 961 {OV9282_REG_ANA_CORE_2, OV9282_ANA_CORE2_RAW10}, 962 }, { 963 {OV9282_REG_PLL_CTRL_0D, OV9282_PLL_CTRL_0D_RAW8}, 964 {OV9282_REG_ANA_CORE_2, OV9282_ANA_CORE2_RAW8}, 965 } 966 }; 967 const struct ov9282_reg_list *reg_list; 968 int bitdepth_index; 969 int ret; 970 971 /* Write common registers */ 972 ret = ov9282_write_regs(ov9282, common_regs_list.regs, 973 common_regs_list.num_of_regs); 974 if (ret) { 975 dev_err(ov9282->dev, "fail to write common registers"); 976 return ret; 977 } 978 979 bitdepth_index = ov9282->code == MEDIA_BUS_FMT_Y10_1X10 ? 0 : 1; 980 ret = ov9282_write_regs(ov9282, bitdepth_regs[bitdepth_index], 2); 981 if (ret) { 982 dev_err(ov9282->dev, "fail to write bitdepth regs"); 983 return ret; 984 } 985 986 /* Write sensor mode registers */ 987 reg_list = &ov9282->cur_mode->reg_list; 988 ret = ov9282_write_regs(ov9282, reg_list->regs, reg_list->num_of_regs); 989 if (ret) { 990 dev_err(ov9282->dev, "fail to write initial registers"); 991 return ret; 992 } 993 994 /* Setup handler will write actual exposure and gain */ 995 ret = __v4l2_ctrl_handler_setup(ov9282->sd.ctrl_handler); 996 if (ret) { 997 dev_err(ov9282->dev, "fail to setup handler"); 998 return ret; 999 } 1000 1001 /* Start streaming */ 1002 ret = ov9282_write_reg(ov9282, OV9282_REG_MODE_SELECT, 1003 1, OV9282_MODE_STREAMING); 1004 if (ret) { 1005 dev_err(ov9282->dev, "fail to start streaming"); 1006 return ret; 1007 } 1008 1009 return 0; 1010 } 1011 1012 /** 1013 * ov9282_stop_streaming() - Stop sensor stream 1014 * @ov9282: pointer to ov9282 device 1015 * 1016 * Return: 0 if successful, error code otherwise. 1017 */ 1018 static int ov9282_stop_streaming(struct ov9282 *ov9282) 1019 { 1020 return ov9282_write_reg(ov9282, OV9282_REG_MODE_SELECT, 1021 1, OV9282_MODE_STANDBY); 1022 } 1023 1024 /** 1025 * ov9282_set_stream() - Enable sensor streaming 1026 * @sd: pointer to ov9282 subdevice 1027 * @enable: set to enable sensor streaming 1028 * 1029 * Return: 0 if successful, error code otherwise. 1030 */ 1031 static int ov9282_set_stream(struct v4l2_subdev *sd, int enable) 1032 { 1033 struct ov9282 *ov9282 = to_ov9282(sd); 1034 int ret; 1035 1036 mutex_lock(&ov9282->mutex); 1037 1038 if (enable) { 1039 ret = pm_runtime_resume_and_get(ov9282->dev); 1040 if (ret) 1041 goto error_unlock; 1042 1043 ret = ov9282_start_streaming(ov9282); 1044 if (ret) 1045 goto error_power_off; 1046 } else { 1047 ov9282_stop_streaming(ov9282); 1048 pm_runtime_put(ov9282->dev); 1049 } 1050 1051 mutex_unlock(&ov9282->mutex); 1052 1053 return 0; 1054 1055 error_power_off: 1056 pm_runtime_put(ov9282->dev); 1057 error_unlock: 1058 mutex_unlock(&ov9282->mutex); 1059 1060 return ret; 1061 } 1062 1063 /** 1064 * ov9282_detect() - Detect ov9282 sensor 1065 * @ov9282: pointer to ov9282 device 1066 * 1067 * Return: 0 if successful, -EIO if sensor id does not match 1068 */ 1069 static int ov9282_detect(struct ov9282 *ov9282) 1070 { 1071 int ret; 1072 u32 val; 1073 1074 ret = ov9282_read_reg(ov9282, OV9282_REG_ID, 2, &val); 1075 if (ret) 1076 return ret; 1077 1078 if (val != OV9282_ID) { 1079 dev_err(ov9282->dev, "chip id mismatch: %x!=%x", 1080 OV9282_ID, val); 1081 return -ENXIO; 1082 } 1083 1084 return 0; 1085 } 1086 1087 static int ov9282_configure_regulators(struct ov9282 *ov9282) 1088 { 1089 unsigned int i; 1090 1091 for (i = 0; i < OV9282_NUM_SUPPLIES; i++) 1092 ov9282->supplies[i].supply = ov9282_supply_names[i]; 1093 1094 return devm_regulator_bulk_get(ov9282->dev, 1095 OV9282_NUM_SUPPLIES, 1096 ov9282->supplies); 1097 } 1098 1099 /** 1100 * ov9282_parse_hw_config() - Parse HW configuration and check if supported 1101 * @ov9282: pointer to ov9282 device 1102 * 1103 * Return: 0 if successful, error code otherwise. 1104 */ 1105 static int ov9282_parse_hw_config(struct ov9282 *ov9282) 1106 { 1107 struct fwnode_handle *fwnode = dev_fwnode(ov9282->dev); 1108 struct v4l2_fwnode_endpoint bus_cfg = { 1109 .bus_type = V4L2_MBUS_CSI2_DPHY 1110 }; 1111 struct fwnode_handle *ep; 1112 unsigned long rate; 1113 unsigned int i; 1114 int ret; 1115 1116 if (!fwnode) 1117 return -ENXIO; 1118 1119 /* Request optional reset pin */ 1120 ov9282->reset_gpio = devm_gpiod_get_optional(ov9282->dev, "reset", 1121 GPIOD_OUT_LOW); 1122 if (IS_ERR(ov9282->reset_gpio)) { 1123 dev_err(ov9282->dev, "failed to get reset gpio %ld", 1124 PTR_ERR(ov9282->reset_gpio)); 1125 return PTR_ERR(ov9282->reset_gpio); 1126 } 1127 1128 /* Get sensor input clock */ 1129 ov9282->inclk = devm_clk_get(ov9282->dev, NULL); 1130 if (IS_ERR(ov9282->inclk)) { 1131 dev_err(ov9282->dev, "could not get inclk"); 1132 return PTR_ERR(ov9282->inclk); 1133 } 1134 1135 ret = ov9282_configure_regulators(ov9282); 1136 if (ret) 1137 return dev_err_probe(ov9282->dev, ret, 1138 "Failed to get power regulators\n"); 1139 1140 rate = clk_get_rate(ov9282->inclk); 1141 if (rate != OV9282_INCLK_RATE) { 1142 dev_err(ov9282->dev, "inclk frequency mismatch"); 1143 return -EINVAL; 1144 } 1145 1146 ep = fwnode_graph_get_next_endpoint(fwnode, NULL); 1147 if (!ep) 1148 return -ENXIO; 1149 1150 ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); 1151 fwnode_handle_put(ep); 1152 if (ret) 1153 return ret; 1154 1155 ov9282->noncontinuous_clock = 1156 bus_cfg.bus.mipi_csi2.flags & V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK; 1157 1158 if (bus_cfg.bus.mipi_csi2.num_data_lanes != OV9282_NUM_DATA_LANES) { 1159 dev_err(ov9282->dev, 1160 "number of CSI2 data lanes %d is not supported", 1161 bus_cfg.bus.mipi_csi2.num_data_lanes); 1162 ret = -EINVAL; 1163 goto done_endpoint_free; 1164 } 1165 1166 if (!bus_cfg.nr_of_link_frequencies) { 1167 dev_err(ov9282->dev, "no link frequencies defined"); 1168 ret = -EINVAL; 1169 goto done_endpoint_free; 1170 } 1171 1172 for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++) 1173 if (bus_cfg.link_frequencies[i] == OV9282_LINK_FREQ) 1174 goto done_endpoint_free; 1175 1176 ret = -EINVAL; 1177 1178 done_endpoint_free: 1179 v4l2_fwnode_endpoint_free(&bus_cfg); 1180 1181 return ret; 1182 } 1183 1184 /* V4l2 subdevice ops */ 1185 static const struct v4l2_subdev_core_ops ov9282_core_ops = { 1186 .subscribe_event = v4l2_ctrl_subdev_subscribe_event, 1187 .unsubscribe_event = v4l2_event_subdev_unsubscribe, 1188 }; 1189 1190 static const struct v4l2_subdev_video_ops ov9282_video_ops = { 1191 .s_stream = ov9282_set_stream, 1192 }; 1193 1194 static const struct v4l2_subdev_pad_ops ov9282_pad_ops = { 1195 .init_cfg = ov9282_init_pad_cfg, 1196 .enum_mbus_code = ov9282_enum_mbus_code, 1197 .enum_frame_size = ov9282_enum_frame_size, 1198 .get_fmt = ov9282_get_pad_format, 1199 .set_fmt = ov9282_set_pad_format, 1200 .get_selection = ov9282_get_selection, 1201 }; 1202 1203 static const struct v4l2_subdev_ops ov9282_subdev_ops = { 1204 .core = &ov9282_core_ops, 1205 .video = &ov9282_video_ops, 1206 .pad = &ov9282_pad_ops, 1207 }; 1208 1209 /** 1210 * ov9282_power_on() - Sensor power on sequence 1211 * @dev: pointer to i2c device 1212 * 1213 * Return: 0 if successful, error code otherwise. 1214 */ 1215 static int ov9282_power_on(struct device *dev) 1216 { 1217 struct v4l2_subdev *sd = dev_get_drvdata(dev); 1218 struct ov9282 *ov9282 = to_ov9282(sd); 1219 int ret; 1220 1221 ret = regulator_bulk_enable(OV9282_NUM_SUPPLIES, ov9282->supplies); 1222 if (ret < 0) { 1223 dev_err(dev, "Failed to enable regulators\n"); 1224 return ret; 1225 } 1226 1227 usleep_range(400, 600); 1228 1229 gpiod_set_value_cansleep(ov9282->reset_gpio, 1); 1230 1231 ret = clk_prepare_enable(ov9282->inclk); 1232 if (ret) { 1233 dev_err(ov9282->dev, "fail to enable inclk"); 1234 goto error_reset; 1235 } 1236 1237 usleep_range(400, 600); 1238 1239 ret = ov9282_write_reg(ov9282, OV9282_REG_MIPI_CTRL00, 1, 1240 ov9282->noncontinuous_clock ? 1241 OV9282_GATED_CLOCK : 0); 1242 if (ret) { 1243 dev_err(ov9282->dev, "fail to write MIPI_CTRL00"); 1244 goto error_clk; 1245 } 1246 1247 return 0; 1248 1249 error_clk: 1250 clk_disable_unprepare(ov9282->inclk); 1251 error_reset: 1252 gpiod_set_value_cansleep(ov9282->reset_gpio, 0); 1253 1254 regulator_bulk_disable(OV9282_NUM_SUPPLIES, ov9282->supplies); 1255 1256 return ret; 1257 } 1258 1259 /** 1260 * ov9282_power_off() - Sensor power off sequence 1261 * @dev: pointer to i2c device 1262 * 1263 * Return: 0 if successful, error code otherwise. 1264 */ 1265 static int ov9282_power_off(struct device *dev) 1266 { 1267 struct v4l2_subdev *sd = dev_get_drvdata(dev); 1268 struct ov9282 *ov9282 = to_ov9282(sd); 1269 1270 gpiod_set_value_cansleep(ov9282->reset_gpio, 0); 1271 1272 clk_disable_unprepare(ov9282->inclk); 1273 1274 regulator_bulk_disable(OV9282_NUM_SUPPLIES, ov9282->supplies); 1275 1276 return 0; 1277 } 1278 1279 /** 1280 * ov9282_init_controls() - Initialize sensor subdevice controls 1281 * @ov9282: pointer to ov9282 device 1282 * 1283 * Return: 0 if successful, error code otherwise. 1284 */ 1285 static int ov9282_init_controls(struct ov9282 *ov9282) 1286 { 1287 struct v4l2_ctrl_handler *ctrl_hdlr = &ov9282->ctrl_handler; 1288 const struct ov9282_mode *mode = ov9282->cur_mode; 1289 struct v4l2_fwnode_device_properties props; 1290 u32 hblank_min; 1291 u32 lpfr; 1292 int ret; 1293 1294 ret = v4l2_ctrl_handler_init(ctrl_hdlr, 10); 1295 if (ret) 1296 return ret; 1297 1298 /* Serialize controls with sensor device */ 1299 ctrl_hdlr->lock = &ov9282->mutex; 1300 1301 /* Initialize exposure and gain */ 1302 lpfr = mode->vblank + mode->height; 1303 ov9282->exp_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, 1304 &ov9282_ctrl_ops, 1305 V4L2_CID_EXPOSURE, 1306 OV9282_EXPOSURE_MIN, 1307 lpfr - OV9282_EXPOSURE_OFFSET, 1308 OV9282_EXPOSURE_STEP, 1309 OV9282_EXPOSURE_DEFAULT); 1310 1311 ov9282->again_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, 1312 &ov9282_ctrl_ops, 1313 V4L2_CID_ANALOGUE_GAIN, 1314 OV9282_AGAIN_MIN, 1315 OV9282_AGAIN_MAX, 1316 OV9282_AGAIN_STEP, 1317 OV9282_AGAIN_DEFAULT); 1318 1319 v4l2_ctrl_cluster(2, &ov9282->exp_ctrl); 1320 1321 ov9282->vblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, 1322 &ov9282_ctrl_ops, 1323 V4L2_CID_VBLANK, 1324 mode->vblank_min, 1325 mode->vblank_max, 1326 1, mode->vblank); 1327 1328 v4l2_ctrl_new_std(ctrl_hdlr, &ov9282_ctrl_ops, V4L2_CID_VFLIP, 1329 0, 1, 1, 1); 1330 1331 v4l2_ctrl_new_std(ctrl_hdlr, &ov9282_ctrl_ops, V4L2_CID_HFLIP, 1332 0, 1, 1, 1); 1333 1334 /* Read only controls */ 1335 ov9282->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &ov9282_ctrl_ops, 1336 V4L2_CID_PIXEL_RATE, 1337 OV9282_PIXEL_RATE_10BIT, 1338 OV9282_PIXEL_RATE_10BIT, 1, 1339 OV9282_PIXEL_RATE_10BIT); 1340 1341 ov9282->link_freq_ctrl = v4l2_ctrl_new_int_menu(ctrl_hdlr, 1342 &ov9282_ctrl_ops, 1343 V4L2_CID_LINK_FREQ, 1344 ARRAY_SIZE(link_freq) - 1345 1, 1346 mode->link_freq_idx, 1347 link_freq); 1348 if (ov9282->link_freq_ctrl) 1349 ov9282->link_freq_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; 1350 1351 hblank_min = mode->hblank_min[ov9282->noncontinuous_clock ? 0 : 1]; 1352 ov9282->hblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, 1353 &ov9282_ctrl_ops, 1354 V4L2_CID_HBLANK, 1355 hblank_min, 1356 OV9282_TIMING_HTS_MAX - mode->width, 1357 1, hblank_min); 1358 1359 ret = v4l2_fwnode_device_parse(ov9282->dev, &props); 1360 if (!ret) { 1361 /* Failure sets ctrl_hdlr->error, which we check afterwards anyway */ 1362 v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, &ov9282_ctrl_ops, 1363 &props); 1364 } 1365 1366 if (ctrl_hdlr->error || ret) { 1367 dev_err(ov9282->dev, "control init failed: %d", 1368 ctrl_hdlr->error); 1369 v4l2_ctrl_handler_free(ctrl_hdlr); 1370 return ctrl_hdlr->error; 1371 } 1372 1373 ov9282->sd.ctrl_handler = ctrl_hdlr; 1374 1375 return 0; 1376 } 1377 1378 /** 1379 * ov9282_probe() - I2C client device binding 1380 * @client: pointer to i2c client device 1381 * 1382 * Return: 0 if successful, error code otherwise. 1383 */ 1384 static int ov9282_probe(struct i2c_client *client) 1385 { 1386 struct ov9282 *ov9282; 1387 int ret; 1388 1389 ov9282 = devm_kzalloc(&client->dev, sizeof(*ov9282), GFP_KERNEL); 1390 if (!ov9282) 1391 return -ENOMEM; 1392 1393 ov9282->dev = &client->dev; 1394 1395 /* Initialize subdev */ 1396 v4l2_i2c_subdev_init(&ov9282->sd, client, &ov9282_subdev_ops); 1397 v4l2_i2c_subdev_set_name(&ov9282->sd, client, 1398 device_get_match_data(ov9282->dev), NULL); 1399 1400 ret = ov9282_parse_hw_config(ov9282); 1401 if (ret) { 1402 dev_err(ov9282->dev, "HW configuration is not supported"); 1403 return ret; 1404 } 1405 1406 mutex_init(&ov9282->mutex); 1407 1408 ret = ov9282_power_on(ov9282->dev); 1409 if (ret) { 1410 dev_err(ov9282->dev, "failed to power-on the sensor"); 1411 goto error_mutex_destroy; 1412 } 1413 1414 /* Check module identity */ 1415 ret = ov9282_detect(ov9282); 1416 if (ret) { 1417 dev_err(ov9282->dev, "failed to find sensor: %d", ret); 1418 goto error_power_off; 1419 } 1420 1421 /* Set default mode to first mode */ 1422 ov9282->cur_mode = &supported_modes[DEFAULT_MODE]; 1423 ov9282->code = MEDIA_BUS_FMT_Y10_1X10; 1424 ov9282->vblank = ov9282->cur_mode->vblank; 1425 1426 ret = ov9282_init_controls(ov9282); 1427 if (ret) { 1428 dev_err(ov9282->dev, "failed to init controls: %d", ret); 1429 goto error_power_off; 1430 } 1431 1432 /* Initialize subdev */ 1433 ov9282->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | 1434 V4L2_SUBDEV_FL_HAS_EVENTS; 1435 ov9282->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; 1436 1437 /* Initialize source pad */ 1438 ov9282->pad.flags = MEDIA_PAD_FL_SOURCE; 1439 ret = media_entity_pads_init(&ov9282->sd.entity, 1, &ov9282->pad); 1440 if (ret) { 1441 dev_err(ov9282->dev, "failed to init entity pads: %d", ret); 1442 goto error_handler_free; 1443 } 1444 1445 ret = v4l2_async_register_subdev_sensor(&ov9282->sd); 1446 if (ret < 0) { 1447 dev_err(ov9282->dev, 1448 "failed to register async subdev: %d", ret); 1449 goto error_media_entity; 1450 } 1451 1452 pm_runtime_set_active(ov9282->dev); 1453 pm_runtime_enable(ov9282->dev); 1454 pm_runtime_idle(ov9282->dev); 1455 1456 return 0; 1457 1458 error_media_entity: 1459 media_entity_cleanup(&ov9282->sd.entity); 1460 error_handler_free: 1461 v4l2_ctrl_handler_free(ov9282->sd.ctrl_handler); 1462 error_power_off: 1463 ov9282_power_off(ov9282->dev); 1464 error_mutex_destroy: 1465 mutex_destroy(&ov9282->mutex); 1466 1467 return ret; 1468 } 1469 1470 /** 1471 * ov9282_remove() - I2C client device unbinding 1472 * @client: pointer to I2C client device 1473 * 1474 * Return: 0 if successful, error code otherwise. 1475 */ 1476 static void ov9282_remove(struct i2c_client *client) 1477 { 1478 struct v4l2_subdev *sd = i2c_get_clientdata(client); 1479 struct ov9282 *ov9282 = to_ov9282(sd); 1480 1481 v4l2_async_unregister_subdev(sd); 1482 media_entity_cleanup(&sd->entity); 1483 v4l2_ctrl_handler_free(sd->ctrl_handler); 1484 1485 pm_runtime_disable(&client->dev); 1486 if (!pm_runtime_status_suspended(&client->dev)) 1487 ov9282_power_off(&client->dev); 1488 pm_runtime_set_suspended(&client->dev); 1489 1490 mutex_destroy(&ov9282->mutex); 1491 } 1492 1493 static const struct dev_pm_ops ov9282_pm_ops = { 1494 SET_RUNTIME_PM_OPS(ov9282_power_off, ov9282_power_on, NULL) 1495 }; 1496 1497 static const struct of_device_id ov9282_of_match[] = { 1498 { .compatible = "ovti,ov9281", .data = "ov9281" }, 1499 { .compatible = "ovti,ov9282", .data = "ov9282" }, 1500 { } 1501 }; 1502 1503 MODULE_DEVICE_TABLE(of, ov9282_of_match); 1504 1505 static struct i2c_driver ov9282_driver = { 1506 .probe = ov9282_probe, 1507 .remove = ov9282_remove, 1508 .driver = { 1509 .name = "ov9282", 1510 .pm = &ov9282_pm_ops, 1511 .of_match_table = ov9282_of_match, 1512 }, 1513 }; 1514 1515 module_i2c_driver(ov9282_driver); 1516 1517 MODULE_DESCRIPTION("OmniVision ov9282 sensor driver"); 1518 MODULE_LICENSE("GPL"); 1519