1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * ov772x Camera Driver 4 * 5 * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org> 6 * 7 * Copyright (C) 2008 Renesas Solutions Corp. 8 * Kuninori Morimoto <morimoto.kuninori@renesas.com> 9 * 10 * Based on ov7670 and soc_camera_platform driver, 11 * 12 * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net> 13 * Copyright (C) 2008 Magnus Damm 14 * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> 15 */ 16 17 #include <linux/clk.h> 18 #include <linux/delay.h> 19 #include <linux/gpio/consumer.h> 20 #include <linux/i2c.h> 21 #include <linux/init.h> 22 #include <linux/kernel.h> 23 #include <linux/module.h> 24 #include <linux/regmap.h> 25 #include <linux/slab.h> 26 #include <linux/v4l2-mediabus.h> 27 #include <linux/videodev2.h> 28 29 #include <media/i2c/ov772x.h> 30 31 #include <media/v4l2-ctrls.h> 32 #include <media/v4l2-device.h> 33 #include <media/v4l2-event.h> 34 #include <media/v4l2-fwnode.h> 35 #include <media/v4l2-image-sizes.h> 36 #include <media/v4l2-subdev.h> 37 38 /* 39 * register offset 40 */ 41 #define GAIN 0x00 /* AGC - Gain control gain setting */ 42 #define BLUE 0x01 /* AWB - Blue channel gain setting */ 43 #define RED 0x02 /* AWB - Red channel gain setting */ 44 #define GREEN 0x03 /* AWB - Green channel gain setting */ 45 #define COM1 0x04 /* Common control 1 */ 46 #define BAVG 0x05 /* U/B Average Level */ 47 #define GAVG 0x06 /* Y/Gb Average Level */ 48 #define RAVG 0x07 /* V/R Average Level */ 49 #define AECH 0x08 /* Exposure Value - AEC MSBs */ 50 #define COM2 0x09 /* Common control 2 */ 51 #define PID 0x0A /* Product ID Number MSB */ 52 #define VER 0x0B /* Product ID Number LSB */ 53 #define COM3 0x0C /* Common control 3 */ 54 #define COM4 0x0D /* Common control 4 */ 55 #define COM5 0x0E /* Common control 5 */ 56 #define COM6 0x0F /* Common control 6 */ 57 #define AEC 0x10 /* Exposure Value */ 58 #define CLKRC 0x11 /* Internal clock */ 59 #define COM7 0x12 /* Common control 7 */ 60 #define COM8 0x13 /* Common control 8 */ 61 #define COM9 0x14 /* Common control 9 */ 62 #define COM10 0x15 /* Common control 10 */ 63 #define REG16 0x16 /* Register 16 */ 64 #define HSTART 0x17 /* Horizontal sensor size */ 65 #define HSIZE 0x18 /* Horizontal frame (HREF column) end high 8-bit */ 66 #define VSTART 0x19 /* Vertical frame (row) start high 8-bit */ 67 #define VSIZE 0x1A /* Vertical sensor size */ 68 #define PSHFT 0x1B /* Data format - pixel delay select */ 69 #define MIDH 0x1C /* Manufacturer ID byte - high */ 70 #define MIDL 0x1D /* Manufacturer ID byte - low */ 71 #define LAEC 0x1F /* Fine AEC value */ 72 #define COM11 0x20 /* Common control 11 */ 73 #define BDBASE 0x22 /* Banding filter Minimum AEC value */ 74 #define DBSTEP 0x23 /* Banding filter Maximum Setp */ 75 #define AEW 0x24 /* AGC/AEC - Stable operating region (upper limit) */ 76 #define AEB 0x25 /* AGC/AEC - Stable operating region (lower limit) */ 77 #define VPT 0x26 /* AGC/AEC Fast mode operating region */ 78 #define REG28 0x28 /* Register 28 */ 79 #define HOUTSIZE 0x29 /* Horizontal data output size MSBs */ 80 #define EXHCH 0x2A /* Dummy pixel insert MSB */ 81 #define EXHCL 0x2B /* Dummy pixel insert LSB */ 82 #define VOUTSIZE 0x2C /* Vertical data output size MSBs */ 83 #define ADVFL 0x2D /* LSB of insert dummy lines in Vertical direction */ 84 #define ADVFH 0x2E /* MSG of insert dummy lines in Vertical direction */ 85 #define YAVE 0x2F /* Y/G Channel Average value */ 86 #define LUMHTH 0x30 /* Histogram AEC/AGC Luminance high level threshold */ 87 #define LUMLTH 0x31 /* Histogram AEC/AGC Luminance low level threshold */ 88 #define HREF 0x32 /* Image start and size control */ 89 #define DM_LNL 0x33 /* Dummy line low 8 bits */ 90 #define DM_LNH 0x34 /* Dummy line high 8 bits */ 91 #define ADOFF_B 0x35 /* AD offset compensation value for B channel */ 92 #define ADOFF_R 0x36 /* AD offset compensation value for R channel */ 93 #define ADOFF_GB 0x37 /* AD offset compensation value for Gb channel */ 94 #define ADOFF_GR 0x38 /* AD offset compensation value for Gr channel */ 95 #define OFF_B 0x39 /* Analog process B channel offset value */ 96 #define OFF_R 0x3A /* Analog process R channel offset value */ 97 #define OFF_GB 0x3B /* Analog process Gb channel offset value */ 98 #define OFF_GR 0x3C /* Analog process Gr channel offset value */ 99 #define COM12 0x3D /* Common control 12 */ 100 #define COM13 0x3E /* Common control 13 */ 101 #define COM14 0x3F /* Common control 14 */ 102 #define COM15 0x40 /* Common control 15*/ 103 #define COM16 0x41 /* Common control 16 */ 104 #define TGT_B 0x42 /* BLC blue channel target value */ 105 #define TGT_R 0x43 /* BLC red channel target value */ 106 #define TGT_GB 0x44 /* BLC Gb channel target value */ 107 #define TGT_GR 0x45 /* BLC Gr channel target value */ 108 /* for ov7720 */ 109 #define LCC0 0x46 /* Lens correction control 0 */ 110 #define LCC1 0x47 /* Lens correction option 1 - X coordinate */ 111 #define LCC2 0x48 /* Lens correction option 2 - Y coordinate */ 112 #define LCC3 0x49 /* Lens correction option 3 */ 113 #define LCC4 0x4A /* Lens correction option 4 - radius of the circular */ 114 #define LCC5 0x4B /* Lens correction option 5 */ 115 #define LCC6 0x4C /* Lens correction option 6 */ 116 /* for ov7725 */ 117 #define LC_CTR 0x46 /* Lens correction control */ 118 #define LC_XC 0x47 /* X coordinate of lens correction center relative */ 119 #define LC_YC 0x48 /* Y coordinate of lens correction center relative */ 120 #define LC_COEF 0x49 /* Lens correction coefficient */ 121 #define LC_RADI 0x4A /* Lens correction radius */ 122 #define LC_COEFB 0x4B /* Lens B channel compensation coefficient */ 123 #define LC_COEFR 0x4C /* Lens R channel compensation coefficient */ 124 125 #define FIXGAIN 0x4D /* Analog fix gain amplifer */ 126 #define AREF0 0x4E /* Sensor reference control */ 127 #define AREF1 0x4F /* Sensor reference current control */ 128 #define AREF2 0x50 /* Analog reference control */ 129 #define AREF3 0x51 /* ADC reference control */ 130 #define AREF4 0x52 /* ADC reference control */ 131 #define AREF5 0x53 /* ADC reference control */ 132 #define AREF6 0x54 /* Analog reference control */ 133 #define AREF7 0x55 /* Analog reference control */ 134 #define UFIX 0x60 /* U channel fixed value output */ 135 #define VFIX 0x61 /* V channel fixed value output */ 136 #define AWBB_BLK 0x62 /* AWB option for advanced AWB */ 137 #define AWB_CTRL0 0x63 /* AWB control byte 0 */ 138 #define DSP_CTRL1 0x64 /* DSP control byte 1 */ 139 #define DSP_CTRL2 0x65 /* DSP control byte 2 */ 140 #define DSP_CTRL3 0x66 /* DSP control byte 3 */ 141 #define DSP_CTRL4 0x67 /* DSP control byte 4 */ 142 #define AWB_BIAS 0x68 /* AWB BLC level clip */ 143 #define AWB_CTRL1 0x69 /* AWB control 1 */ 144 #define AWB_CTRL2 0x6A /* AWB control 2 */ 145 #define AWB_CTRL3 0x6B /* AWB control 3 */ 146 #define AWB_CTRL4 0x6C /* AWB control 4 */ 147 #define AWB_CTRL5 0x6D /* AWB control 5 */ 148 #define AWB_CTRL6 0x6E /* AWB control 6 */ 149 #define AWB_CTRL7 0x6F /* AWB control 7 */ 150 #define AWB_CTRL8 0x70 /* AWB control 8 */ 151 #define AWB_CTRL9 0x71 /* AWB control 9 */ 152 #define AWB_CTRL10 0x72 /* AWB control 10 */ 153 #define AWB_CTRL11 0x73 /* AWB control 11 */ 154 #define AWB_CTRL12 0x74 /* AWB control 12 */ 155 #define AWB_CTRL13 0x75 /* AWB control 13 */ 156 #define AWB_CTRL14 0x76 /* AWB control 14 */ 157 #define AWB_CTRL15 0x77 /* AWB control 15 */ 158 #define AWB_CTRL16 0x78 /* AWB control 16 */ 159 #define AWB_CTRL17 0x79 /* AWB control 17 */ 160 #define AWB_CTRL18 0x7A /* AWB control 18 */ 161 #define AWB_CTRL19 0x7B /* AWB control 19 */ 162 #define AWB_CTRL20 0x7C /* AWB control 20 */ 163 #define AWB_CTRL21 0x7D /* AWB control 21 */ 164 #define GAM1 0x7E /* Gamma Curve 1st segment input end point */ 165 #define GAM2 0x7F /* Gamma Curve 2nd segment input end point */ 166 #define GAM3 0x80 /* Gamma Curve 3rd segment input end point */ 167 #define GAM4 0x81 /* Gamma Curve 4th segment input end point */ 168 #define GAM5 0x82 /* Gamma Curve 5th segment input end point */ 169 #define GAM6 0x83 /* Gamma Curve 6th segment input end point */ 170 #define GAM7 0x84 /* Gamma Curve 7th segment input end point */ 171 #define GAM8 0x85 /* Gamma Curve 8th segment input end point */ 172 #define GAM9 0x86 /* Gamma Curve 9th segment input end point */ 173 #define GAM10 0x87 /* Gamma Curve 10th segment input end point */ 174 #define GAM11 0x88 /* Gamma Curve 11th segment input end point */ 175 #define GAM12 0x89 /* Gamma Curve 12th segment input end point */ 176 #define GAM13 0x8A /* Gamma Curve 13th segment input end point */ 177 #define GAM14 0x8B /* Gamma Curve 14th segment input end point */ 178 #define GAM15 0x8C /* Gamma Curve 15th segment input end point */ 179 #define SLOP 0x8D /* Gamma curve highest segment slope */ 180 #define DNSTH 0x8E /* De-noise threshold */ 181 #define EDGE_STRNGT 0x8F /* Edge strength control when manual mode */ 182 #define EDGE_TRSHLD 0x90 /* Edge threshold control when manual mode */ 183 #define DNSOFF 0x91 /* Auto De-noise threshold control */ 184 #define EDGE_UPPER 0x92 /* Edge strength upper limit when Auto mode */ 185 #define EDGE_LOWER 0x93 /* Edge strength lower limit when Auto mode */ 186 #define MTX1 0x94 /* Matrix coefficient 1 */ 187 #define MTX2 0x95 /* Matrix coefficient 2 */ 188 #define MTX3 0x96 /* Matrix coefficient 3 */ 189 #define MTX4 0x97 /* Matrix coefficient 4 */ 190 #define MTX5 0x98 /* Matrix coefficient 5 */ 191 #define MTX6 0x99 /* Matrix coefficient 6 */ 192 #define MTX_CTRL 0x9A /* Matrix control */ 193 #define BRIGHT 0x9B /* Brightness control */ 194 #define CNTRST 0x9C /* Contrast contrast */ 195 #define CNTRST_CTRL 0x9D /* Contrast contrast center */ 196 #define UVAD_J0 0x9E /* Auto UV adjust contrast 0 */ 197 #define UVAD_J1 0x9F /* Auto UV adjust contrast 1 */ 198 #define SCAL0 0xA0 /* Scaling control 0 */ 199 #define SCAL1 0xA1 /* Scaling control 1 */ 200 #define SCAL2 0xA2 /* Scaling control 2 */ 201 #define FIFODLYM 0xA3 /* FIFO manual mode delay control */ 202 #define FIFODLYA 0xA4 /* FIFO auto mode delay control */ 203 #define SDE 0xA6 /* Special digital effect control */ 204 #define USAT 0xA7 /* U component saturation control */ 205 #define VSAT 0xA8 /* V component saturation control */ 206 /* for ov7720 */ 207 #define HUE0 0xA9 /* Hue control 0 */ 208 #define HUE1 0xAA /* Hue control 1 */ 209 /* for ov7725 */ 210 #define HUECOS 0xA9 /* Cosine value */ 211 #define HUESIN 0xAA /* Sine value */ 212 213 #define SIGN 0xAB /* Sign bit for Hue and contrast */ 214 #define DSPAUTO 0xAC /* DSP auto function ON/OFF control */ 215 216 /* 217 * register detail 218 */ 219 220 /* COM2 */ 221 #define SOFT_SLEEP_MODE 0x10 /* Soft sleep mode */ 222 /* Output drive capability */ 223 #define OCAP_1x 0x00 /* 1x */ 224 #define OCAP_2x 0x01 /* 2x */ 225 #define OCAP_3x 0x02 /* 3x */ 226 #define OCAP_4x 0x03 /* 4x */ 227 228 /* COM3 */ 229 #define SWAP_MASK (SWAP_RGB | SWAP_YUV | SWAP_ML) 230 #define IMG_MASK (VFLIP_IMG | HFLIP_IMG | SCOLOR_TEST) 231 232 #define VFLIP_IMG 0x80 /* Vertical flip image ON/OFF selection */ 233 #define HFLIP_IMG 0x40 /* Horizontal mirror image ON/OFF selection */ 234 #define SWAP_RGB 0x20 /* Swap B/R output sequence in RGB mode */ 235 #define SWAP_YUV 0x10 /* Swap Y/UV output sequence in YUV mode */ 236 #define SWAP_ML 0x08 /* Swap output MSB/LSB */ 237 /* Tri-state option for output clock */ 238 #define NOTRI_CLOCK 0x04 /* 0: Tri-state at this period */ 239 /* 1: No tri-state at this period */ 240 /* Tri-state option for output data */ 241 #define NOTRI_DATA 0x02 /* 0: Tri-state at this period */ 242 /* 1: No tri-state at this period */ 243 #define SCOLOR_TEST 0x01 /* Sensor color bar test pattern */ 244 245 /* COM4 */ 246 /* PLL frequency control */ 247 #define PLL_BYPASS 0x00 /* 00: Bypass PLL */ 248 #define PLL_4x 0x40 /* 01: PLL 4x */ 249 #define PLL_6x 0x80 /* 10: PLL 6x */ 250 #define PLL_8x 0xc0 /* 11: PLL 8x */ 251 /* AEC evaluate window */ 252 #define AEC_FULL 0x00 /* 00: Full window */ 253 #define AEC_1p2 0x10 /* 01: 1/2 window */ 254 #define AEC_1p4 0x20 /* 10: 1/4 window */ 255 #define AEC_2p3 0x30 /* 11: Low 2/3 window */ 256 #define COM4_RESERVED 0x01 /* Reserved bit */ 257 258 /* COM5 */ 259 #define AFR_ON_OFF 0x80 /* Auto frame rate control ON/OFF selection */ 260 #define AFR_SPPED 0x40 /* Auto frame rate control speed selection */ 261 /* Auto frame rate max rate control */ 262 #define AFR_NO_RATE 0x00 /* No reduction of frame rate */ 263 #define AFR_1p2 0x10 /* Max reduction to 1/2 frame rate */ 264 #define AFR_1p4 0x20 /* Max reduction to 1/4 frame rate */ 265 #define AFR_1p8 0x30 /* Max reduction to 1/8 frame rate */ 266 /* Auto frame rate active point control */ 267 #define AF_2x 0x00 /* Add frame when AGC reaches 2x gain */ 268 #define AF_4x 0x04 /* Add frame when AGC reaches 4x gain */ 269 #define AF_8x 0x08 /* Add frame when AGC reaches 8x gain */ 270 #define AF_16x 0x0c /* Add frame when AGC reaches 16x gain */ 271 /* AEC max step control */ 272 #define AEC_NO_LIMIT 0x01 /* 0 : AEC incease step has limit */ 273 /* 1 : No limit to AEC increase step */ 274 /* CLKRC */ 275 /* Input clock divider register */ 276 #define CLKRC_RESERVED 0x80 /* Reserved bit */ 277 #define CLKRC_DIV(n) ((n) - 1) 278 279 /* COM7 */ 280 /* SCCB Register Reset */ 281 #define SCCB_RESET 0x80 /* 0 : No change */ 282 /* 1 : Resets all registers to default */ 283 /* Resolution selection */ 284 #define SLCT_MASK 0x40 /* Mask of VGA or QVGA */ 285 #define SLCT_VGA 0x00 /* 0 : VGA */ 286 #define SLCT_QVGA 0x40 /* 1 : QVGA */ 287 #define ITU656_ON_OFF 0x20 /* ITU656 protocol ON/OFF selection */ 288 #define SENSOR_RAW 0x10 /* Sensor RAW */ 289 /* RGB output format control */ 290 #define FMT_MASK 0x0c /* Mask of color format */ 291 #define FMT_GBR422 0x00 /* 00 : GBR 4:2:2 */ 292 #define FMT_RGB565 0x04 /* 01 : RGB 565 */ 293 #define FMT_RGB555 0x08 /* 10 : RGB 555 */ 294 #define FMT_RGB444 0x0c /* 11 : RGB 444 */ 295 /* Output format control */ 296 #define OFMT_MASK 0x03 /* Mask of output format */ 297 #define OFMT_YUV 0x00 /* 00 : YUV */ 298 #define OFMT_P_BRAW 0x01 /* 01 : Processed Bayer RAW */ 299 #define OFMT_RGB 0x02 /* 10 : RGB */ 300 #define OFMT_BRAW 0x03 /* 11 : Bayer RAW */ 301 302 /* COM8 */ 303 #define FAST_ALGO 0x80 /* Enable fast AGC/AEC algorithm */ 304 /* AEC Setp size limit */ 305 #define UNLMT_STEP 0x40 /* 0 : Step size is limited */ 306 /* 1 : Unlimited step size */ 307 #define BNDF_ON_OFF 0x20 /* Banding filter ON/OFF */ 308 #define AEC_BND 0x10 /* Enable AEC below banding value */ 309 #define AEC_ON_OFF 0x08 /* Fine AEC ON/OFF control */ 310 #define AGC_ON 0x04 /* AGC Enable */ 311 #define AWB_ON 0x02 /* AWB Enable */ 312 #define AEC_ON 0x01 /* AEC Enable */ 313 314 /* COM9 */ 315 #define BASE_AECAGC 0x80 /* Histogram or average based AEC/AGC */ 316 /* Automatic gain ceiling - maximum AGC value */ 317 #define GAIN_2x 0x00 /* 000 : 2x */ 318 #define GAIN_4x 0x10 /* 001 : 4x */ 319 #define GAIN_8x 0x20 /* 010 : 8x */ 320 #define GAIN_16x 0x30 /* 011 : 16x */ 321 #define GAIN_32x 0x40 /* 100 : 32x */ 322 #define GAIN_64x 0x50 /* 101 : 64x */ 323 #define GAIN_128x 0x60 /* 110 : 128x */ 324 #define DROP_VSYNC 0x04 /* Drop VSYNC output of corrupt frame */ 325 #define DROP_HREF 0x02 /* Drop HREF output of corrupt frame */ 326 327 /* COM11 */ 328 #define SGLF_ON_OFF 0x02 /* Single frame ON/OFF selection */ 329 #define SGLF_TRIG 0x01 /* Single frame transfer trigger */ 330 331 /* HREF */ 332 #define HREF_VSTART_SHIFT 6 /* VSTART LSB */ 333 #define HREF_HSTART_SHIFT 4 /* HSTART 2 LSBs */ 334 #define HREF_VSIZE_SHIFT 2 /* VSIZE LSB */ 335 #define HREF_HSIZE_SHIFT 0 /* HSIZE 2 LSBs */ 336 337 /* EXHCH */ 338 #define EXHCH_VSIZE_SHIFT 2 /* VOUTSIZE LSB */ 339 #define EXHCH_HSIZE_SHIFT 0 /* HOUTSIZE 2 LSBs */ 340 341 /* DSP_CTRL1 */ 342 #define FIFO_ON 0x80 /* FIFO enable/disable selection */ 343 #define UV_ON_OFF 0x40 /* UV adjust function ON/OFF selection */ 344 #define YUV444_2_422 0x20 /* YUV444 to 422 UV channel option selection */ 345 #define CLR_MTRX_ON_OFF 0x10 /* Color matrix ON/OFF selection */ 346 #define INTPLT_ON_OFF 0x08 /* Interpolation ON/OFF selection */ 347 #define GMM_ON_OFF 0x04 /* Gamma function ON/OFF selection */ 348 #define AUTO_BLK_ON_OFF 0x02 /* Black defect auto correction ON/OFF */ 349 #define AUTO_WHT_ON_OFF 0x01 /* White define auto correction ON/OFF */ 350 351 /* DSP_CTRL3 */ 352 #define UV_MASK 0x80 /* UV output sequence option */ 353 #define UV_ON 0x80 /* ON */ 354 #define UV_OFF 0x00 /* OFF */ 355 #define CBAR_MASK 0x20 /* DSP Color bar mask */ 356 #define CBAR_ON 0x20 /* ON */ 357 #define CBAR_OFF 0x00 /* OFF */ 358 359 /* DSP_CTRL4 */ 360 #define DSP_OFMT_YUV 0x00 361 #define DSP_OFMT_RGB 0x00 362 #define DSP_OFMT_RAW8 0x02 363 #define DSP_OFMT_RAW10 0x03 364 365 /* DSPAUTO (DSP Auto Function ON/OFF Control) */ 366 #define AWB_ACTRL 0x80 /* AWB auto threshold control */ 367 #define DENOISE_ACTRL 0x40 /* De-noise auto threshold control */ 368 #define EDGE_ACTRL 0x20 /* Edge enhancement auto strength control */ 369 #define UV_ACTRL 0x10 /* UV adjust auto slope control */ 370 #define SCAL0_ACTRL 0x08 /* Auto scaling factor control */ 371 #define SCAL1_2_ACTRL 0x04 /* Auto scaling factor control */ 372 373 #define OV772X_MAX_WIDTH VGA_WIDTH 374 #define OV772X_MAX_HEIGHT VGA_HEIGHT 375 376 /* 377 * ID 378 */ 379 #define OV7720 0x7720 380 #define OV7725 0x7721 381 #define VERSION(pid, ver) ((pid << 8) | (ver & 0xFF)) 382 383 /* 384 * PLL multipliers 385 */ 386 static struct { 387 unsigned int mult; 388 u8 com4; 389 } ov772x_pll[] = { 390 { 1, PLL_BYPASS, }, 391 { 4, PLL_4x, }, 392 { 6, PLL_6x, }, 393 { 8, PLL_8x, }, 394 }; 395 396 /* 397 * struct 398 */ 399 400 struct ov772x_color_format { 401 u32 code; 402 enum v4l2_colorspace colorspace; 403 u8 dsp3; 404 u8 dsp4; 405 u8 com3; 406 u8 com7; 407 }; 408 409 struct ov772x_win_size { 410 char *name; 411 unsigned char com7_bit; 412 unsigned int sizeimage; 413 struct v4l2_rect rect; 414 }; 415 416 struct ov772x_priv { 417 struct v4l2_subdev subdev; 418 struct v4l2_ctrl_handler hdl; 419 struct clk *clk; 420 struct regmap *regmap; 421 struct ov772x_camera_info *info; 422 struct gpio_desc *pwdn_gpio; 423 struct gpio_desc *rstb_gpio; 424 const struct ov772x_color_format *cfmt; 425 const struct ov772x_win_size *win; 426 struct v4l2_ctrl *vflip_ctrl; 427 struct v4l2_ctrl *hflip_ctrl; 428 unsigned int test_pattern; 429 /* band_filter = COM8[5] ? 256 - BDBASE : 0 */ 430 struct v4l2_ctrl *band_filter_ctrl; 431 unsigned int fps; 432 /* lock to protect power_count and streaming */ 433 struct mutex lock; 434 int power_count; 435 int streaming; 436 struct media_pad pad; 437 enum v4l2_mbus_type bus_type; 438 }; 439 440 /* 441 * supported color format list 442 */ 443 static const struct ov772x_color_format ov772x_cfmts[] = { 444 { 445 .code = MEDIA_BUS_FMT_YUYV8_2X8, 446 .colorspace = V4L2_COLORSPACE_SRGB, 447 .dsp3 = 0x0, 448 .dsp4 = DSP_OFMT_YUV, 449 .com3 = SWAP_YUV, 450 .com7 = OFMT_YUV, 451 }, 452 { 453 .code = MEDIA_BUS_FMT_YVYU8_2X8, 454 .colorspace = V4L2_COLORSPACE_SRGB, 455 .dsp3 = UV_ON, 456 .dsp4 = DSP_OFMT_YUV, 457 .com3 = SWAP_YUV, 458 .com7 = OFMT_YUV, 459 }, 460 { 461 .code = MEDIA_BUS_FMT_UYVY8_2X8, 462 .colorspace = V4L2_COLORSPACE_SRGB, 463 .dsp3 = 0x0, 464 .dsp4 = DSP_OFMT_YUV, 465 .com3 = 0x0, 466 .com7 = OFMT_YUV, 467 }, 468 { 469 .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE, 470 .colorspace = V4L2_COLORSPACE_SRGB, 471 .dsp3 = 0x0, 472 .dsp4 = DSP_OFMT_YUV, 473 .com3 = SWAP_RGB, 474 .com7 = FMT_RGB555 | OFMT_RGB, 475 }, 476 { 477 .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE, 478 .colorspace = V4L2_COLORSPACE_SRGB, 479 .dsp3 = 0x0, 480 .dsp4 = DSP_OFMT_YUV, 481 .com3 = 0x0, 482 .com7 = FMT_RGB555 | OFMT_RGB, 483 }, 484 { 485 .code = MEDIA_BUS_FMT_RGB565_2X8_LE, 486 .colorspace = V4L2_COLORSPACE_SRGB, 487 .dsp3 = 0x0, 488 .dsp4 = DSP_OFMT_YUV, 489 .com3 = SWAP_RGB, 490 .com7 = FMT_RGB565 | OFMT_RGB, 491 }, 492 { 493 .code = MEDIA_BUS_FMT_RGB565_2X8_BE, 494 .colorspace = V4L2_COLORSPACE_SRGB, 495 .dsp3 = 0x0, 496 .dsp4 = DSP_OFMT_YUV, 497 .com3 = 0x0, 498 .com7 = FMT_RGB565 | OFMT_RGB, 499 }, 500 { 501 /* Setting DSP4 to DSP_OFMT_RAW8 still gives 10-bit output, 502 * regardless of the COM7 value. We can thus only support 10-bit 503 * Bayer until someone figures it out. 504 */ 505 .code = MEDIA_BUS_FMT_SBGGR10_1X10, 506 .colorspace = V4L2_COLORSPACE_SRGB, 507 .dsp3 = 0x0, 508 .dsp4 = DSP_OFMT_RAW10, 509 .com3 = 0x0, 510 .com7 = SENSOR_RAW | OFMT_BRAW, 511 }, 512 }; 513 514 /* 515 * window size list 516 */ 517 518 static const struct ov772x_win_size ov772x_win_sizes[] = { 519 { 520 .name = "VGA", 521 .com7_bit = SLCT_VGA, 522 .sizeimage = 510 * 748, 523 .rect = { 524 .left = 140, 525 .top = 14, 526 .width = VGA_WIDTH, 527 .height = VGA_HEIGHT, 528 }, 529 }, { 530 .name = "QVGA", 531 .com7_bit = SLCT_QVGA, 532 .sizeimage = 278 * 576, 533 .rect = { 534 .left = 252, 535 .top = 6, 536 .width = QVGA_WIDTH, 537 .height = QVGA_HEIGHT, 538 }, 539 }, 540 }; 541 542 static const char * const ov772x_test_pattern_menu[] = { 543 "Disabled", 544 "Vertical Color Bar Type 1", 545 }; 546 547 /* 548 * frame rate settings lists 549 */ 550 static const unsigned int ov772x_frame_intervals[] = { 5, 10, 15, 20, 30, 60 }; 551 552 /* 553 * general function 554 */ 555 556 static struct ov772x_priv *to_ov772x(struct v4l2_subdev *sd) 557 { 558 return container_of(sd, struct ov772x_priv, subdev); 559 } 560 561 static int ov772x_reset(struct ov772x_priv *priv) 562 { 563 int ret; 564 565 ret = regmap_write(priv->regmap, COM7, SCCB_RESET); 566 if (ret < 0) 567 return ret; 568 569 usleep_range(1000, 5000); 570 571 return regmap_update_bits(priv->regmap, COM2, SOFT_SLEEP_MODE, 572 SOFT_SLEEP_MODE); 573 } 574 575 /* 576 * subdev ops 577 */ 578 579 static int ov772x_s_stream(struct v4l2_subdev *sd, int enable) 580 { 581 struct i2c_client *client = v4l2_get_subdevdata(sd); 582 struct ov772x_priv *priv = to_ov772x(sd); 583 int ret = 0; 584 585 mutex_lock(&priv->lock); 586 587 if (priv->streaming == enable) 588 goto done; 589 590 if (priv->bus_type == V4L2_MBUS_BT656) { 591 ret = regmap_update_bits(priv->regmap, COM7, ITU656_ON_OFF, 592 enable ? 593 ITU656_ON_OFF : ~ITU656_ON_OFF); 594 if (ret) 595 goto done; 596 } 597 598 ret = regmap_update_bits(priv->regmap, COM2, SOFT_SLEEP_MODE, 599 enable ? 0 : SOFT_SLEEP_MODE); 600 if (ret) 601 goto done; 602 603 if (enable) { 604 dev_dbg(&client->dev, "format %d, win %s\n", 605 priv->cfmt->code, priv->win->name); 606 } 607 priv->streaming = enable; 608 609 done: 610 mutex_unlock(&priv->lock); 611 612 return ret; 613 } 614 615 static unsigned int ov772x_select_fps(struct ov772x_priv *priv, 616 struct v4l2_fract *tpf) 617 { 618 unsigned int fps = tpf->numerator ? 619 tpf->denominator / tpf->numerator : 620 tpf->denominator; 621 unsigned int best_diff; 622 unsigned int diff; 623 unsigned int idx; 624 unsigned int i; 625 626 /* Approximate to the closest supported frame interval. */ 627 best_diff = ~0L; 628 for (i = 0, idx = 0; i < ARRAY_SIZE(ov772x_frame_intervals); i++) { 629 diff = abs(fps - ov772x_frame_intervals[i]); 630 if (diff < best_diff) { 631 idx = i; 632 best_diff = diff; 633 } 634 } 635 636 return ov772x_frame_intervals[idx]; 637 } 638 639 static int ov772x_set_frame_rate(struct ov772x_priv *priv, 640 unsigned int fps, 641 const struct ov772x_color_format *cfmt, 642 const struct ov772x_win_size *win) 643 { 644 unsigned long fin = clk_get_rate(priv->clk); 645 unsigned int best_diff; 646 unsigned int fsize; 647 unsigned int pclk; 648 unsigned int diff; 649 unsigned int i; 650 u8 clkrc = 0; 651 u8 com4 = 0; 652 int ret; 653 654 /* Use image size (with blankings) to calculate desired pixel clock. */ 655 switch (cfmt->com7 & OFMT_MASK) { 656 case OFMT_BRAW: 657 fsize = win->sizeimage; 658 break; 659 case OFMT_RGB: 660 case OFMT_YUV: 661 default: 662 fsize = win->sizeimage * 2; 663 break; 664 } 665 666 pclk = fps * fsize; 667 668 /* 669 * Pixel clock generation circuit is pretty simple: 670 * 671 * Fin -> [ / CLKRC_div] -> [ * PLL_mult] -> pclk 672 * 673 * Try to approximate the desired pixel clock testing all available 674 * PLL multipliers (1x, 4x, 6x, 8x) and calculate corresponding 675 * divisor with: 676 * 677 * div = PLL_mult * Fin / pclk 678 * 679 * and re-calculate the pixel clock using it: 680 * 681 * pclk = Fin * PLL_mult / CLKRC_div 682 * 683 * Choose the PLL_mult and CLKRC_div pair that gives a pixel clock 684 * closer to the desired one. 685 * 686 * The desired pixel clock is calculated using a known frame size 687 * (blanking included) and FPS. 688 */ 689 best_diff = ~0L; 690 for (i = 0; i < ARRAY_SIZE(ov772x_pll); i++) { 691 unsigned int pll_mult = ov772x_pll[i].mult; 692 unsigned int pll_out = pll_mult * fin; 693 unsigned int t_pclk; 694 unsigned int div; 695 696 if (pll_out < pclk) 697 continue; 698 699 div = DIV_ROUND_CLOSEST(pll_out, pclk); 700 t_pclk = DIV_ROUND_CLOSEST(fin * pll_mult, div); 701 diff = abs(pclk - t_pclk); 702 if (diff < best_diff) { 703 best_diff = diff; 704 clkrc = CLKRC_DIV(div); 705 com4 = ov772x_pll[i].com4; 706 } 707 } 708 709 ret = regmap_write(priv->regmap, COM4, com4 | COM4_RESERVED); 710 if (ret < 0) 711 return ret; 712 713 ret = regmap_write(priv->regmap, CLKRC, clkrc | CLKRC_RESERVED); 714 if (ret < 0) 715 return ret; 716 717 return 0; 718 } 719 720 static int ov772x_get_frame_interval(struct v4l2_subdev *sd, 721 struct v4l2_subdev_state *sd_state, 722 struct v4l2_subdev_frame_interval *ival) 723 { 724 struct ov772x_priv *priv = to_ov772x(sd); 725 struct v4l2_fract *tpf = &ival->interval; 726 727 /* 728 * FIXME: Implement support for V4L2_SUBDEV_FORMAT_TRY, using the V4L2 729 * subdev active state API. 730 */ 731 if (ival->which != V4L2_SUBDEV_FORMAT_ACTIVE) 732 return -EINVAL; 733 734 tpf->numerator = 1; 735 tpf->denominator = priv->fps; 736 737 return 0; 738 } 739 740 static int ov772x_set_frame_interval(struct v4l2_subdev *sd, 741 struct v4l2_subdev_state *sd_state, 742 struct v4l2_subdev_frame_interval *ival) 743 { 744 struct ov772x_priv *priv = to_ov772x(sd); 745 struct v4l2_fract *tpf = &ival->interval; 746 unsigned int fps; 747 int ret = 0; 748 749 /* 750 * FIXME: Implement support for V4L2_SUBDEV_FORMAT_TRY, using the V4L2 751 * subdev active state API. 752 */ 753 if (ival->which != V4L2_SUBDEV_FORMAT_ACTIVE) 754 return -EINVAL; 755 756 mutex_lock(&priv->lock); 757 758 if (priv->streaming) { 759 ret = -EBUSY; 760 goto error; 761 } 762 763 fps = ov772x_select_fps(priv, tpf); 764 765 /* 766 * If the device is not powered up by the host driver do 767 * not apply any changes to H/W at this time. Instead 768 * the frame rate will be restored right after power-up. 769 */ 770 if (priv->power_count > 0) { 771 ret = ov772x_set_frame_rate(priv, fps, priv->cfmt, priv->win); 772 if (ret) 773 goto error; 774 } 775 776 tpf->numerator = 1; 777 tpf->denominator = fps; 778 priv->fps = fps; 779 780 error: 781 mutex_unlock(&priv->lock); 782 783 return ret; 784 } 785 786 static int ov772x_s_ctrl(struct v4l2_ctrl *ctrl) 787 { 788 struct ov772x_priv *priv = container_of(ctrl->handler, 789 struct ov772x_priv, hdl); 790 struct regmap *regmap = priv->regmap; 791 int ret = 0; 792 u8 val; 793 794 /* v4l2_ctrl_lock() locks our own mutex */ 795 796 /* 797 * If the device is not powered up by the host driver do 798 * not apply any controls to H/W at this time. Instead 799 * the controls will be restored right after power-up. 800 */ 801 if (priv->power_count == 0) 802 return 0; 803 804 switch (ctrl->id) { 805 case V4L2_CID_VFLIP: 806 val = ctrl->val ? VFLIP_IMG : 0x00; 807 if (priv->info && (priv->info->flags & OV772X_FLAG_VFLIP)) 808 val ^= VFLIP_IMG; 809 return regmap_update_bits(regmap, COM3, VFLIP_IMG, val); 810 case V4L2_CID_HFLIP: 811 val = ctrl->val ? HFLIP_IMG : 0x00; 812 if (priv->info && (priv->info->flags & OV772X_FLAG_HFLIP)) 813 val ^= HFLIP_IMG; 814 return regmap_update_bits(regmap, COM3, HFLIP_IMG, val); 815 case V4L2_CID_BAND_STOP_FILTER: 816 if (!ctrl->val) { 817 /* Switch the filter off, it is on now */ 818 ret = regmap_update_bits(regmap, BDBASE, 0xff, 0xff); 819 if (!ret) 820 ret = regmap_update_bits(regmap, COM8, 821 BNDF_ON_OFF, 0); 822 } else { 823 /* Switch the filter on, set AEC low limit */ 824 val = 256 - ctrl->val; 825 ret = regmap_update_bits(regmap, COM8, 826 BNDF_ON_OFF, BNDF_ON_OFF); 827 if (!ret) 828 ret = regmap_update_bits(regmap, BDBASE, 829 0xff, val); 830 } 831 832 return ret; 833 case V4L2_CID_TEST_PATTERN: 834 priv->test_pattern = ctrl->val; 835 return 0; 836 } 837 838 return -EINVAL; 839 } 840 841 #ifdef CONFIG_VIDEO_ADV_DEBUG 842 static int ov772x_g_register(struct v4l2_subdev *sd, 843 struct v4l2_dbg_register *reg) 844 { 845 struct ov772x_priv *priv = to_ov772x(sd); 846 int ret; 847 unsigned int val; 848 849 reg->size = 1; 850 if (reg->reg > 0xff) 851 return -EINVAL; 852 853 ret = regmap_read(priv->regmap, reg->reg, &val); 854 if (ret < 0) 855 return ret; 856 857 reg->val = (__u64)val; 858 859 return 0; 860 } 861 862 static int ov772x_s_register(struct v4l2_subdev *sd, 863 const struct v4l2_dbg_register *reg) 864 { 865 struct ov772x_priv *priv = to_ov772x(sd); 866 867 if (reg->reg > 0xff || 868 reg->val > 0xff) 869 return -EINVAL; 870 871 return regmap_write(priv->regmap, reg->reg, reg->val); 872 } 873 #endif 874 875 static int ov772x_power_on(struct ov772x_priv *priv) 876 { 877 struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev); 878 int ret; 879 880 if (priv->clk) { 881 ret = clk_prepare_enable(priv->clk); 882 if (ret) 883 return ret; 884 } 885 886 if (priv->pwdn_gpio) { 887 gpiod_set_value(priv->pwdn_gpio, 1); 888 usleep_range(500, 1000); 889 } 890 891 /* 892 * FIXME: The reset signal is connected to a shared GPIO on some 893 * platforms (namely the SuperH Migo-R). Until a framework becomes 894 * available to handle this cleanly, request the GPIO temporarily 895 * to avoid conflicts. 896 */ 897 priv->rstb_gpio = gpiod_get_optional(&client->dev, "reset", 898 GPIOD_OUT_LOW); 899 if (IS_ERR(priv->rstb_gpio)) { 900 dev_info(&client->dev, "Unable to get GPIO \"reset\""); 901 clk_disable_unprepare(priv->clk); 902 return PTR_ERR(priv->rstb_gpio); 903 } 904 905 if (priv->rstb_gpio) { 906 gpiod_set_value(priv->rstb_gpio, 1); 907 usleep_range(500, 1000); 908 gpiod_set_value(priv->rstb_gpio, 0); 909 usleep_range(500, 1000); 910 911 gpiod_put(priv->rstb_gpio); 912 } 913 914 return 0; 915 } 916 917 static int ov772x_power_off(struct ov772x_priv *priv) 918 { 919 clk_disable_unprepare(priv->clk); 920 921 if (priv->pwdn_gpio) { 922 gpiod_set_value(priv->pwdn_gpio, 0); 923 usleep_range(500, 1000); 924 } 925 926 return 0; 927 } 928 929 static int ov772x_set_params(struct ov772x_priv *priv, 930 const struct ov772x_color_format *cfmt, 931 const struct ov772x_win_size *win); 932 933 static int ov772x_s_power(struct v4l2_subdev *sd, int on) 934 { 935 struct ov772x_priv *priv = to_ov772x(sd); 936 int ret = 0; 937 938 mutex_lock(&priv->lock); 939 940 /* If the power count is modified from 0 to != 0 or from != 0 to 0, 941 * update the power state. 942 */ 943 if (priv->power_count == !on) { 944 if (on) { 945 ret = ov772x_power_on(priv); 946 /* 947 * Restore the format, the frame rate, and 948 * the controls 949 */ 950 if (!ret) 951 ret = ov772x_set_params(priv, priv->cfmt, 952 priv->win); 953 } else { 954 ret = ov772x_power_off(priv); 955 } 956 } 957 958 if (!ret) { 959 /* Update the power count. */ 960 priv->power_count += on ? 1 : -1; 961 WARN(priv->power_count < 0, "Unbalanced power count\n"); 962 WARN(priv->power_count > 1, "Duplicated s_power call\n"); 963 } 964 965 mutex_unlock(&priv->lock); 966 967 return ret; 968 } 969 970 static const struct ov772x_win_size *ov772x_select_win(u32 width, u32 height) 971 { 972 const struct ov772x_win_size *win = &ov772x_win_sizes[0]; 973 u32 best_diff = UINT_MAX; 974 unsigned int i; 975 976 for (i = 0; i < ARRAY_SIZE(ov772x_win_sizes); ++i) { 977 u32 diff = abs(width - ov772x_win_sizes[i].rect.width) 978 + abs(height - ov772x_win_sizes[i].rect.height); 979 if (diff < best_diff) { 980 best_diff = diff; 981 win = &ov772x_win_sizes[i]; 982 } 983 } 984 985 return win; 986 } 987 988 static void ov772x_select_params(const struct v4l2_mbus_framefmt *mf, 989 const struct ov772x_color_format **cfmt, 990 const struct ov772x_win_size **win) 991 { 992 unsigned int i; 993 994 /* Select a format. */ 995 *cfmt = &ov772x_cfmts[0]; 996 997 for (i = 0; i < ARRAY_SIZE(ov772x_cfmts); i++) { 998 if (mf->code == ov772x_cfmts[i].code) { 999 *cfmt = &ov772x_cfmts[i]; 1000 break; 1001 } 1002 } 1003 1004 /* Select a window size. */ 1005 *win = ov772x_select_win(mf->width, mf->height); 1006 } 1007 1008 static int ov772x_edgectrl(struct ov772x_priv *priv) 1009 { 1010 struct regmap *regmap = priv->regmap; 1011 int ret; 1012 1013 if (!priv->info) 1014 return 0; 1015 1016 if (priv->info->edgectrl.strength & OV772X_MANUAL_EDGE_CTRL) { 1017 /* 1018 * Manual Edge Control Mode. 1019 * 1020 * Edge auto strength bit is set by default. 1021 * Remove it when manual mode. 1022 */ 1023 1024 ret = regmap_update_bits(regmap, DSPAUTO, EDGE_ACTRL, 0x00); 1025 if (ret < 0) 1026 return ret; 1027 1028 ret = regmap_update_bits(regmap, EDGE_TRSHLD, 1029 OV772X_EDGE_THRESHOLD_MASK, 1030 priv->info->edgectrl.threshold); 1031 if (ret < 0) 1032 return ret; 1033 1034 ret = regmap_update_bits(regmap, EDGE_STRNGT, 1035 OV772X_EDGE_STRENGTH_MASK, 1036 priv->info->edgectrl.strength); 1037 if (ret < 0) 1038 return ret; 1039 1040 } else if (priv->info->edgectrl.upper > priv->info->edgectrl.lower) { 1041 /* 1042 * Auto Edge Control Mode. 1043 * 1044 * Set upper and lower limit. 1045 */ 1046 ret = regmap_update_bits(regmap, EDGE_UPPER, 1047 OV772X_EDGE_UPPER_MASK, 1048 priv->info->edgectrl.upper); 1049 if (ret < 0) 1050 return ret; 1051 1052 ret = regmap_update_bits(regmap, EDGE_LOWER, 1053 OV772X_EDGE_LOWER_MASK, 1054 priv->info->edgectrl.lower); 1055 if (ret < 0) 1056 return ret; 1057 } 1058 1059 return 0; 1060 } 1061 1062 static int ov772x_set_params(struct ov772x_priv *priv, 1063 const struct ov772x_color_format *cfmt, 1064 const struct ov772x_win_size *win) 1065 { 1066 int ret; 1067 u8 val; 1068 1069 /* Reset hardware. */ 1070 ov772x_reset(priv); 1071 1072 /* Edge Ctrl. */ 1073 ret = ov772x_edgectrl(priv); 1074 if (ret < 0) 1075 return ret; 1076 1077 /* Format and window size. */ 1078 ret = regmap_write(priv->regmap, HSTART, win->rect.left >> 2); 1079 if (ret < 0) 1080 goto ov772x_set_fmt_error; 1081 ret = regmap_write(priv->regmap, HSIZE, win->rect.width >> 2); 1082 if (ret < 0) 1083 goto ov772x_set_fmt_error; 1084 ret = regmap_write(priv->regmap, VSTART, win->rect.top >> 1); 1085 if (ret < 0) 1086 goto ov772x_set_fmt_error; 1087 ret = regmap_write(priv->regmap, VSIZE, win->rect.height >> 1); 1088 if (ret < 0) 1089 goto ov772x_set_fmt_error; 1090 ret = regmap_write(priv->regmap, HOUTSIZE, win->rect.width >> 2); 1091 if (ret < 0) 1092 goto ov772x_set_fmt_error; 1093 ret = regmap_write(priv->regmap, VOUTSIZE, win->rect.height >> 1); 1094 if (ret < 0) 1095 goto ov772x_set_fmt_error; 1096 ret = regmap_write(priv->regmap, HREF, 1097 ((win->rect.top & 1) << HREF_VSTART_SHIFT) | 1098 ((win->rect.left & 3) << HREF_HSTART_SHIFT) | 1099 ((win->rect.height & 1) << HREF_VSIZE_SHIFT) | 1100 ((win->rect.width & 3) << HREF_HSIZE_SHIFT)); 1101 if (ret < 0) 1102 goto ov772x_set_fmt_error; 1103 ret = regmap_write(priv->regmap, EXHCH, 1104 ((win->rect.height & 1) << EXHCH_VSIZE_SHIFT) | 1105 ((win->rect.width & 3) << EXHCH_HSIZE_SHIFT)); 1106 if (ret < 0) 1107 goto ov772x_set_fmt_error; 1108 1109 /* Set DSP_CTRL3. */ 1110 val = cfmt->dsp3; 1111 if (val) { 1112 ret = regmap_update_bits(priv->regmap, DSP_CTRL3, UV_MASK, val); 1113 if (ret < 0) 1114 goto ov772x_set_fmt_error; 1115 } 1116 1117 /* DSP_CTRL4: AEC reference point and DSP output format. */ 1118 if (cfmt->dsp4) { 1119 ret = regmap_write(priv->regmap, DSP_CTRL4, cfmt->dsp4); 1120 if (ret < 0) 1121 goto ov772x_set_fmt_error; 1122 } 1123 1124 /* Set COM3. */ 1125 val = cfmt->com3; 1126 if (priv->info && (priv->info->flags & OV772X_FLAG_VFLIP)) 1127 val |= VFLIP_IMG; 1128 if (priv->info && (priv->info->flags & OV772X_FLAG_HFLIP)) 1129 val |= HFLIP_IMG; 1130 if (priv->vflip_ctrl->val) 1131 val ^= VFLIP_IMG; 1132 if (priv->hflip_ctrl->val) 1133 val ^= HFLIP_IMG; 1134 if (priv->test_pattern) 1135 val |= SCOLOR_TEST; 1136 1137 ret = regmap_update_bits(priv->regmap, COM3, SWAP_MASK | IMG_MASK, val); 1138 if (ret < 0) 1139 goto ov772x_set_fmt_error; 1140 1141 /* COM7: Sensor resolution and output format control. */ 1142 ret = regmap_write(priv->regmap, COM7, win->com7_bit | cfmt->com7); 1143 if (ret < 0) 1144 goto ov772x_set_fmt_error; 1145 1146 /* COM4, CLKRC: Set pixel clock and framerate. */ 1147 ret = ov772x_set_frame_rate(priv, priv->fps, cfmt, win); 1148 if (ret < 0) 1149 goto ov772x_set_fmt_error; 1150 1151 /* Set COM8. */ 1152 if (priv->band_filter_ctrl->val) { 1153 unsigned short band_filter = priv->band_filter_ctrl->val; 1154 1155 ret = regmap_update_bits(priv->regmap, COM8, 1156 BNDF_ON_OFF, BNDF_ON_OFF); 1157 if (!ret) 1158 ret = regmap_update_bits(priv->regmap, BDBASE, 1159 0xff, 256 - band_filter); 1160 if (ret < 0) 1161 goto ov772x_set_fmt_error; 1162 } 1163 1164 return ret; 1165 1166 ov772x_set_fmt_error: 1167 1168 ov772x_reset(priv); 1169 1170 return ret; 1171 } 1172 1173 static int ov772x_get_selection(struct v4l2_subdev *sd, 1174 struct v4l2_subdev_state *sd_state, 1175 struct v4l2_subdev_selection *sel) 1176 { 1177 struct ov772x_priv *priv = to_ov772x(sd); 1178 1179 if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE) 1180 return -EINVAL; 1181 1182 sel->r.left = 0; 1183 sel->r.top = 0; 1184 switch (sel->target) { 1185 case V4L2_SEL_TGT_CROP_BOUNDS: 1186 case V4L2_SEL_TGT_CROP: 1187 sel->r.width = priv->win->rect.width; 1188 sel->r.height = priv->win->rect.height; 1189 return 0; 1190 default: 1191 return -EINVAL; 1192 } 1193 } 1194 1195 static int ov772x_get_fmt(struct v4l2_subdev *sd, 1196 struct v4l2_subdev_state *sd_state, 1197 struct v4l2_subdev_format *format) 1198 { 1199 struct v4l2_mbus_framefmt *mf = &format->format; 1200 struct ov772x_priv *priv = to_ov772x(sd); 1201 1202 if (format->pad) 1203 return -EINVAL; 1204 1205 mf->width = priv->win->rect.width; 1206 mf->height = priv->win->rect.height; 1207 mf->code = priv->cfmt->code; 1208 mf->colorspace = priv->cfmt->colorspace; 1209 mf->field = V4L2_FIELD_NONE; 1210 1211 return 0; 1212 } 1213 1214 static int ov772x_set_fmt(struct v4l2_subdev *sd, 1215 struct v4l2_subdev_state *sd_state, 1216 struct v4l2_subdev_format *format) 1217 { 1218 struct ov772x_priv *priv = to_ov772x(sd); 1219 struct v4l2_mbus_framefmt *mf = &format->format; 1220 const struct ov772x_color_format *cfmt; 1221 const struct ov772x_win_size *win; 1222 int ret = 0; 1223 1224 if (format->pad) 1225 return -EINVAL; 1226 1227 ov772x_select_params(mf, &cfmt, &win); 1228 1229 mf->code = cfmt->code; 1230 mf->width = win->rect.width; 1231 mf->height = win->rect.height; 1232 mf->field = V4L2_FIELD_NONE; 1233 mf->colorspace = cfmt->colorspace; 1234 mf->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; 1235 mf->quantization = V4L2_QUANTIZATION_DEFAULT; 1236 mf->xfer_func = V4L2_XFER_FUNC_DEFAULT; 1237 1238 if (format->which == V4L2_SUBDEV_FORMAT_TRY) { 1239 *v4l2_subdev_state_get_format(sd_state, 0) = *mf; 1240 return 0; 1241 } 1242 1243 mutex_lock(&priv->lock); 1244 1245 if (priv->streaming) { 1246 ret = -EBUSY; 1247 goto error; 1248 } 1249 1250 /* 1251 * If the device is not powered up by the host driver do 1252 * not apply any changes to H/W at this time. Instead 1253 * the format will be restored right after power-up. 1254 */ 1255 if (priv->power_count > 0) { 1256 ret = ov772x_set_params(priv, cfmt, win); 1257 if (ret < 0) 1258 goto error; 1259 } 1260 priv->win = win; 1261 priv->cfmt = cfmt; 1262 1263 error: 1264 mutex_unlock(&priv->lock); 1265 1266 return ret; 1267 } 1268 1269 static int ov772x_video_probe(struct ov772x_priv *priv) 1270 { 1271 struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev); 1272 int pid, ver, midh, midl; 1273 const char *devname; 1274 int ret; 1275 1276 ret = ov772x_power_on(priv); 1277 if (ret < 0) 1278 return ret; 1279 1280 /* Check and show product ID and manufacturer ID. */ 1281 ret = regmap_read(priv->regmap, PID, &pid); 1282 if (ret < 0) 1283 return ret; 1284 ret = regmap_read(priv->regmap, VER, &ver); 1285 if (ret < 0) 1286 return ret; 1287 1288 switch (VERSION(pid, ver)) { 1289 case OV7720: 1290 devname = "ov7720"; 1291 break; 1292 case OV7725: 1293 devname = "ov7725"; 1294 break; 1295 default: 1296 dev_err(&client->dev, 1297 "Product ID error %x:%x\n", pid, ver); 1298 ret = -ENODEV; 1299 goto done; 1300 } 1301 1302 ret = regmap_read(priv->regmap, MIDH, &midh); 1303 if (ret < 0) 1304 return ret; 1305 ret = regmap_read(priv->regmap, MIDL, &midl); 1306 if (ret < 0) 1307 return ret; 1308 1309 dev_info(&client->dev, 1310 "%s Product ID %0x:%0x Manufacturer ID %x:%x\n", 1311 devname, pid, ver, midh, midl); 1312 1313 ret = v4l2_ctrl_handler_setup(&priv->hdl); 1314 1315 done: 1316 ov772x_power_off(priv); 1317 1318 return ret; 1319 } 1320 1321 static const struct v4l2_ctrl_ops ov772x_ctrl_ops = { 1322 .s_ctrl = ov772x_s_ctrl, 1323 }; 1324 1325 static const struct v4l2_subdev_core_ops ov772x_subdev_core_ops = { 1326 .log_status = v4l2_ctrl_subdev_log_status, 1327 .subscribe_event = v4l2_ctrl_subdev_subscribe_event, 1328 .unsubscribe_event = v4l2_event_subdev_unsubscribe, 1329 #ifdef CONFIG_VIDEO_ADV_DEBUG 1330 .g_register = ov772x_g_register, 1331 .s_register = ov772x_s_register, 1332 #endif 1333 .s_power = ov772x_s_power, 1334 }; 1335 1336 static int ov772x_enum_frame_interval(struct v4l2_subdev *sd, 1337 struct v4l2_subdev_state *sd_state, 1338 struct v4l2_subdev_frame_interval_enum *fie) 1339 { 1340 if (fie->pad || fie->index >= ARRAY_SIZE(ov772x_frame_intervals)) 1341 return -EINVAL; 1342 1343 if (fie->width != VGA_WIDTH && fie->width != QVGA_WIDTH) 1344 return -EINVAL; 1345 if (fie->height != VGA_HEIGHT && fie->height != QVGA_HEIGHT) 1346 return -EINVAL; 1347 1348 fie->interval.numerator = 1; 1349 fie->interval.denominator = ov772x_frame_intervals[fie->index]; 1350 1351 return 0; 1352 } 1353 1354 static int ov772x_enum_mbus_code(struct v4l2_subdev *sd, 1355 struct v4l2_subdev_state *sd_state, 1356 struct v4l2_subdev_mbus_code_enum *code) 1357 { 1358 if (code->pad || code->index >= ARRAY_SIZE(ov772x_cfmts)) 1359 return -EINVAL; 1360 1361 code->code = ov772x_cfmts[code->index].code; 1362 1363 return 0; 1364 } 1365 1366 static const struct v4l2_subdev_video_ops ov772x_subdev_video_ops = { 1367 .s_stream = ov772x_s_stream, 1368 }; 1369 1370 static const struct v4l2_subdev_pad_ops ov772x_subdev_pad_ops = { 1371 .enum_frame_interval = ov772x_enum_frame_interval, 1372 .enum_mbus_code = ov772x_enum_mbus_code, 1373 .get_selection = ov772x_get_selection, 1374 .get_fmt = ov772x_get_fmt, 1375 .set_fmt = ov772x_set_fmt, 1376 .get_frame_interval = ov772x_get_frame_interval, 1377 .set_frame_interval = ov772x_set_frame_interval, 1378 }; 1379 1380 static const struct v4l2_subdev_ops ov772x_subdev_ops = { 1381 .core = &ov772x_subdev_core_ops, 1382 .video = &ov772x_subdev_video_ops, 1383 .pad = &ov772x_subdev_pad_ops, 1384 }; 1385 1386 static int ov772x_parse_dt(struct i2c_client *client, 1387 struct ov772x_priv *priv) 1388 { 1389 struct v4l2_fwnode_endpoint bus_cfg = { 1390 .bus_type = V4L2_MBUS_PARALLEL 1391 }; 1392 struct fwnode_handle *ep; 1393 int ret; 1394 1395 ep = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev), NULL); 1396 if (!ep) { 1397 dev_err(&client->dev, "Endpoint node not found\n"); 1398 return -EINVAL; 1399 } 1400 1401 /* 1402 * For backward compatibility with older DTS where the 1403 * bus-type property was not mandatory, assume 1404 * V4L2_MBUS_PARALLEL as it was the only supported bus at the 1405 * time. v4l2_fwnode_endpoint_alloc_parse() will not fail if 1406 * 'bus-type' is not specified. 1407 */ 1408 ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); 1409 if (ret) { 1410 bus_cfg = (struct v4l2_fwnode_endpoint) 1411 { .bus_type = V4L2_MBUS_BT656 }; 1412 ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); 1413 if (ret) 1414 goto error_fwnode_put; 1415 } 1416 1417 priv->bus_type = bus_cfg.bus_type; 1418 v4l2_fwnode_endpoint_free(&bus_cfg); 1419 1420 error_fwnode_put: 1421 fwnode_handle_put(ep); 1422 1423 return ret; 1424 } 1425 1426 /* 1427 * i2c_driver function 1428 */ 1429 1430 static int ov772x_probe(struct i2c_client *client) 1431 { 1432 struct ov772x_priv *priv; 1433 int ret; 1434 static const struct regmap_config ov772x_regmap_config = { 1435 .reg_bits = 8, 1436 .val_bits = 8, 1437 .max_register = DSPAUTO, 1438 }; 1439 1440 if (!client->dev.of_node && !client->dev.platform_data) { 1441 dev_err(&client->dev, 1442 "Missing ov772x platform data for non-DT device\n"); 1443 return -EINVAL; 1444 } 1445 1446 priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); 1447 if (!priv) 1448 return -ENOMEM; 1449 1450 priv->regmap = devm_regmap_init_sccb(client, &ov772x_regmap_config); 1451 if (IS_ERR(priv->regmap)) { 1452 dev_err(&client->dev, "Failed to allocate register map\n"); 1453 return PTR_ERR(priv->regmap); 1454 } 1455 1456 priv->info = client->dev.platform_data; 1457 mutex_init(&priv->lock); 1458 1459 v4l2_i2c_subdev_init(&priv->subdev, client, &ov772x_subdev_ops); 1460 priv->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | 1461 V4L2_SUBDEV_FL_HAS_EVENTS; 1462 v4l2_ctrl_handler_init(&priv->hdl, 3); 1463 /* Use our mutex for the controls */ 1464 priv->hdl.lock = &priv->lock; 1465 priv->vflip_ctrl = v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops, 1466 V4L2_CID_VFLIP, 0, 1, 1, 0); 1467 priv->hflip_ctrl = v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops, 1468 V4L2_CID_HFLIP, 0, 1, 1, 0); 1469 priv->band_filter_ctrl = v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops, 1470 V4L2_CID_BAND_STOP_FILTER, 1471 0, 256, 1, 0); 1472 v4l2_ctrl_new_std_menu_items(&priv->hdl, &ov772x_ctrl_ops, 1473 V4L2_CID_TEST_PATTERN, 1474 ARRAY_SIZE(ov772x_test_pattern_menu) - 1, 1475 0, 0, ov772x_test_pattern_menu); 1476 priv->subdev.ctrl_handler = &priv->hdl; 1477 if (priv->hdl.error) { 1478 ret = priv->hdl.error; 1479 goto error_ctrl_free; 1480 } 1481 1482 priv->clk = clk_get(&client->dev, NULL); 1483 if (IS_ERR(priv->clk)) { 1484 dev_err(&client->dev, "Unable to get xclk clock\n"); 1485 ret = PTR_ERR(priv->clk); 1486 goto error_ctrl_free; 1487 } 1488 1489 priv->pwdn_gpio = gpiod_get_optional(&client->dev, "powerdown", 1490 GPIOD_OUT_LOW); 1491 if (IS_ERR(priv->pwdn_gpio)) { 1492 dev_info(&client->dev, "Unable to get GPIO \"powerdown\""); 1493 ret = PTR_ERR(priv->pwdn_gpio); 1494 goto error_clk_put; 1495 } 1496 1497 ret = ov772x_parse_dt(client, priv); 1498 if (ret) 1499 goto error_clk_put; 1500 1501 ret = ov772x_video_probe(priv); 1502 if (ret < 0) 1503 goto error_gpio_put; 1504 1505 priv->pad.flags = MEDIA_PAD_FL_SOURCE; 1506 priv->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR; 1507 ret = media_entity_pads_init(&priv->subdev.entity, 1, &priv->pad); 1508 if (ret < 0) 1509 goto error_gpio_put; 1510 1511 priv->cfmt = &ov772x_cfmts[0]; 1512 priv->win = &ov772x_win_sizes[0]; 1513 priv->fps = 15; 1514 1515 ret = v4l2_async_register_subdev(&priv->subdev); 1516 if (ret) 1517 goto error_entity_cleanup; 1518 1519 return 0; 1520 1521 error_entity_cleanup: 1522 media_entity_cleanup(&priv->subdev.entity); 1523 error_gpio_put: 1524 if (priv->pwdn_gpio) 1525 gpiod_put(priv->pwdn_gpio); 1526 error_clk_put: 1527 clk_put(priv->clk); 1528 error_ctrl_free: 1529 v4l2_ctrl_handler_free(&priv->hdl); 1530 mutex_destroy(&priv->lock); 1531 1532 return ret; 1533 } 1534 1535 static void ov772x_remove(struct i2c_client *client) 1536 { 1537 struct ov772x_priv *priv = to_ov772x(i2c_get_clientdata(client)); 1538 1539 media_entity_cleanup(&priv->subdev.entity); 1540 clk_put(priv->clk); 1541 if (priv->pwdn_gpio) 1542 gpiod_put(priv->pwdn_gpio); 1543 v4l2_async_unregister_subdev(&priv->subdev); 1544 v4l2_ctrl_handler_free(&priv->hdl); 1545 mutex_destroy(&priv->lock); 1546 } 1547 1548 static const struct i2c_device_id ov772x_id[] = { 1549 { "ov772x", 0 }, 1550 { } 1551 }; 1552 MODULE_DEVICE_TABLE(i2c, ov772x_id); 1553 1554 static const struct of_device_id ov772x_of_match[] = { 1555 { .compatible = "ovti,ov7725", }, 1556 { .compatible = "ovti,ov7720", }, 1557 { /* sentinel */ }, 1558 }; 1559 MODULE_DEVICE_TABLE(of, ov772x_of_match); 1560 1561 static struct i2c_driver ov772x_i2c_driver = { 1562 .driver = { 1563 .name = "ov772x", 1564 .of_match_table = ov772x_of_match, 1565 }, 1566 .probe = ov772x_probe, 1567 .remove = ov772x_remove, 1568 .id_table = ov772x_id, 1569 }; 1570 1571 module_i2c_driver(ov772x_i2c_driver); 1572 1573 MODULE_DESCRIPTION("V4L2 driver for OV772x image sensor"); 1574 MODULE_AUTHOR("Kuninori Morimoto"); 1575 MODULE_LICENSE("GPL v2"); 1576