1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * A V4L2 driver for OmniVision OV7670 cameras. 4 * 5 * Copyright 2006 One Laptop Per Child Association, Inc. Written 6 * by Jonathan Corbet with substantial inspiration from Mark 7 * McClelland's ovcamchip code. 8 * 9 * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net> 10 */ 11 #include <linux/clk.h> 12 #include <linux/init.h> 13 #include <linux/mod_devicetable.h> 14 #include <linux/module.h> 15 #include <linux/slab.h> 16 #include <linux/i2c.h> 17 #include <linux/delay.h> 18 #include <linux/videodev2.h> 19 #include <linux/gpio/consumer.h> 20 #include <media/v4l2-device.h> 21 #include <media/v4l2-event.h> 22 #include <media/v4l2-ctrls.h> 23 #include <media/v4l2-fwnode.h> 24 #include <media/v4l2-mediabus.h> 25 #include <media/v4l2-image-sizes.h> 26 #include <media/i2c/ov7670.h> 27 28 MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>"); 29 MODULE_DESCRIPTION("A low-level driver for OmniVision ov7670 sensors"); 30 MODULE_LICENSE("GPL"); 31 32 static bool debug; 33 module_param(debug, bool, 0644); 34 MODULE_PARM_DESC(debug, "Debug level (0-1)"); 35 36 /* 37 * The 7670 sits on i2c with ID 0x42 38 */ 39 #define OV7670_I2C_ADDR 0x42 40 41 #define PLL_FACTOR 4 42 43 /* Registers */ 44 #define REG_GAIN 0x00 /* Gain lower 8 bits (rest in vref) */ 45 #define REG_BLUE 0x01 /* blue gain */ 46 #define REG_RED 0x02 /* red gain */ 47 #define REG_VREF 0x03 /* Pieces of GAIN, VSTART, VSTOP */ 48 #define REG_COM1 0x04 /* Control 1 */ 49 #define COM1_CCIR656 0x40 /* CCIR656 enable */ 50 #define REG_BAVE 0x05 /* U/B Average level */ 51 #define REG_GbAVE 0x06 /* Y/Gb Average level */ 52 #define REG_AECHH 0x07 /* AEC MS 5 bits */ 53 #define REG_RAVE 0x08 /* V/R Average level */ 54 #define REG_COM2 0x09 /* Control 2 */ 55 #define COM2_SSLEEP 0x10 /* Soft sleep mode */ 56 #define REG_PID 0x0a /* Product ID MSB */ 57 #define REG_VER 0x0b /* Product ID LSB */ 58 #define REG_COM3 0x0c /* Control 3 */ 59 #define COM3_SWAP 0x40 /* Byte swap */ 60 #define COM3_SCALEEN 0x08 /* Enable scaling */ 61 #define COM3_DCWEN 0x04 /* Enable downsamp/crop/window */ 62 #define REG_COM4 0x0d /* Control 4 */ 63 #define REG_COM5 0x0e /* All "reserved" */ 64 #define REG_COM6 0x0f /* Control 6 */ 65 #define REG_AECH 0x10 /* More bits of AEC value */ 66 #define REG_CLKRC 0x11 /* Clocl control */ 67 #define CLK_EXT 0x40 /* Use external clock directly */ 68 #define CLK_SCALE 0x3f /* Mask for internal clock scale */ 69 #define REG_COM7 0x12 /* Control 7 */ 70 #define COM7_RESET 0x80 /* Register reset */ 71 #define COM7_FMT_MASK 0x38 72 #define COM7_FMT_VGA 0x00 73 #define COM7_FMT_CIF 0x20 /* CIF format */ 74 #define COM7_FMT_QVGA 0x10 /* QVGA format */ 75 #define COM7_FMT_QCIF 0x08 /* QCIF format */ 76 #define COM7_RGB 0x04 /* bits 0 and 2 - RGB format */ 77 #define COM7_YUV 0x00 /* YUV */ 78 #define COM7_BAYER 0x01 /* Bayer format */ 79 #define COM7_PBAYER 0x05 /* "Processed bayer" */ 80 #define REG_COM8 0x13 /* Control 8 */ 81 #define COM8_FASTAEC 0x80 /* Enable fast AGC/AEC */ 82 #define COM8_AECSTEP 0x40 /* Unlimited AEC step size */ 83 #define COM8_BFILT 0x20 /* Band filter enable */ 84 #define COM8_AGC 0x04 /* Auto gain enable */ 85 #define COM8_AWB 0x02 /* White balance enable */ 86 #define COM8_AEC 0x01 /* Auto exposure enable */ 87 #define REG_COM9 0x14 /* Control 9 - gain ceiling */ 88 #define REG_COM10 0x15 /* Control 10 */ 89 #define COM10_HSYNC 0x40 /* HSYNC instead of HREF */ 90 #define COM10_PCLK_HB 0x20 /* Suppress PCLK on horiz blank */ 91 #define COM10_HREF_REV 0x08 /* Reverse HREF */ 92 #define COM10_VS_LEAD 0x04 /* VSYNC on clock leading edge */ 93 #define COM10_VS_NEG 0x02 /* VSYNC negative */ 94 #define COM10_HS_NEG 0x01 /* HSYNC negative */ 95 #define REG_HSTART 0x17 /* Horiz start high bits */ 96 #define REG_HSTOP 0x18 /* Horiz stop high bits */ 97 #define REG_VSTART 0x19 /* Vert start high bits */ 98 #define REG_VSTOP 0x1a /* Vert stop high bits */ 99 #define REG_PSHFT 0x1b /* Pixel delay after HREF */ 100 #define REG_MIDH 0x1c /* Manuf. ID high */ 101 #define REG_MIDL 0x1d /* Manuf. ID low */ 102 #define REG_MVFP 0x1e /* Mirror / vflip */ 103 #define MVFP_MIRROR 0x20 /* Mirror image */ 104 #define MVFP_FLIP 0x10 /* Vertical flip */ 105 106 #define REG_AEW 0x24 /* AGC upper limit */ 107 #define REG_AEB 0x25 /* AGC lower limit */ 108 #define REG_VPT 0x26 /* AGC/AEC fast mode op region */ 109 #define REG_HSYST 0x30 /* HSYNC rising edge delay */ 110 #define REG_HSYEN 0x31 /* HSYNC falling edge delay */ 111 #define REG_HREF 0x32 /* HREF pieces */ 112 #define REG_TSLB 0x3a /* lots of stuff */ 113 #define TSLB_YLAST 0x04 /* UYVY or VYUY - see com13 */ 114 #define REG_COM11 0x3b /* Control 11 */ 115 #define COM11_NIGHT 0x80 /* NIght mode enable */ 116 #define COM11_NMFR 0x60 /* Two bit NM frame rate */ 117 #define COM11_HZAUTO 0x10 /* Auto detect 50/60 Hz */ 118 #define COM11_50HZ 0x08 /* Manual 50Hz select */ 119 #define COM11_EXP 0x02 120 #define REG_COM12 0x3c /* Control 12 */ 121 #define COM12_HREF 0x80 /* HREF always */ 122 #define REG_COM13 0x3d /* Control 13 */ 123 #define COM13_GAMMA 0x80 /* Gamma enable */ 124 #define COM13_UVSAT 0x40 /* UV saturation auto adjustment */ 125 #define COM13_UVSWAP 0x01 /* V before U - w/TSLB */ 126 #define REG_COM14 0x3e /* Control 14 */ 127 #define COM14_DCWEN 0x10 /* DCW/PCLK-scale enable */ 128 #define REG_EDGE 0x3f /* Edge enhancement factor */ 129 #define REG_COM15 0x40 /* Control 15 */ 130 #define COM15_R10F0 0x00 /* Data range 10 to F0 */ 131 #define COM15_R01FE 0x80 /* 01 to FE */ 132 #define COM15_R00FF 0xc0 /* 00 to FF */ 133 #define COM15_RGB565 0x10 /* RGB565 output */ 134 #define COM15_RGB555 0x30 /* RGB555 output */ 135 #define REG_COM16 0x41 /* Control 16 */ 136 #define COM16_AWBGAIN 0x08 /* AWB gain enable */ 137 #define REG_COM17 0x42 /* Control 17 */ 138 #define COM17_AECWIN 0xc0 /* AEC window - must match COM4 */ 139 #define COM17_CBAR 0x08 /* DSP Color bar */ 140 141 /* 142 * This matrix defines how the colors are generated, must be 143 * tweaked to adjust hue and saturation. 144 * 145 * Order: v-red, v-green, v-blue, u-red, u-green, u-blue 146 * 147 * They are nine-bit signed quantities, with the sign bit 148 * stored in 0x58. Sign for v-red is bit 0, and up from there. 149 */ 150 #define REG_CMATRIX_BASE 0x4f 151 #define CMATRIX_LEN 6 152 #define REG_CMATRIX_SIGN 0x58 153 154 155 #define REG_BRIGHT 0x55 /* Brightness */ 156 #define REG_CONTRAS 0x56 /* Contrast control */ 157 158 #define REG_GFIX 0x69 /* Fix gain control */ 159 160 #define REG_DBLV 0x6b /* PLL control an debugging */ 161 #define DBLV_BYPASS 0x0a /* Bypass PLL */ 162 #define DBLV_X4 0x4a /* clock x4 */ 163 #define DBLV_X6 0x8a /* clock x6 */ 164 #define DBLV_X8 0xca /* clock x8 */ 165 166 #define REG_SCALING_XSC 0x70 /* Test pattern and horizontal scale factor */ 167 #define TEST_PATTTERN_0 0x80 168 #define REG_SCALING_YSC 0x71 /* Test pattern and vertical scale factor */ 169 #define TEST_PATTTERN_1 0x80 170 171 #define REG_REG76 0x76 /* OV's name */ 172 #define R76_BLKPCOR 0x80 /* Black pixel correction enable */ 173 #define R76_WHTPCOR 0x40 /* White pixel correction enable */ 174 175 #define REG_RGB444 0x8c /* RGB 444 control */ 176 #define R444_ENABLE 0x02 /* Turn on RGB444, overrides 5x5 */ 177 #define R444_RGBX 0x01 /* Empty nibble at end */ 178 179 #define REG_HAECC1 0x9f /* Hist AEC/AGC control 1 */ 180 #define REG_HAECC2 0xa0 /* Hist AEC/AGC control 2 */ 181 182 #define REG_BD50MAX 0xa5 /* 50hz banding step limit */ 183 #define REG_HAECC3 0xa6 /* Hist AEC/AGC control 3 */ 184 #define REG_HAECC4 0xa7 /* Hist AEC/AGC control 4 */ 185 #define REG_HAECC5 0xa8 /* Hist AEC/AGC control 5 */ 186 #define REG_HAECC6 0xa9 /* Hist AEC/AGC control 6 */ 187 #define REG_HAECC7 0xaa /* Hist AEC/AGC control 7 */ 188 #define REG_BD60MAX 0xab /* 60hz banding step limit */ 189 190 struct ov7670_win_size { 191 int width; 192 int height; 193 unsigned char com7_bit; 194 int hstart; /* Start/stop values for the camera. Note */ 195 int hstop; /* that they do not always make complete */ 196 int vstart; /* sense to humans, but evidently the sensor */ 197 int vstop; /* will do the right thing... */ 198 struct regval_list *regs; /* Regs to tweak */ 199 }; 200 201 struct ov7670_devtype { 202 /* formats supported for each model */ 203 struct ov7670_win_size *win_sizes; 204 unsigned int n_win_sizes; 205 /* callbacks for frame rate control */ 206 int (*set_framerate)(struct v4l2_subdev *, struct v4l2_fract *); 207 void (*get_framerate)(struct v4l2_subdev *, struct v4l2_fract *); 208 }; 209 210 /* 211 * Information we maintain about a known sensor. 212 */ 213 struct ov7670_format_struct; /* coming later */ 214 struct ov7670_info { 215 struct v4l2_subdev sd; 216 struct media_pad pad; 217 struct v4l2_ctrl_handler hdl; 218 struct { 219 /* gain cluster */ 220 struct v4l2_ctrl *auto_gain; 221 struct v4l2_ctrl *gain; 222 }; 223 struct { 224 /* exposure cluster */ 225 struct v4l2_ctrl *auto_exposure; 226 struct v4l2_ctrl *exposure; 227 }; 228 struct { 229 /* saturation/hue cluster */ 230 struct v4l2_ctrl *saturation; 231 struct v4l2_ctrl *hue; 232 }; 233 struct v4l2_mbus_framefmt format; 234 struct ov7670_format_struct *fmt; /* Current format */ 235 struct ov7670_win_size *wsize; 236 struct clk *clk; 237 int on; 238 struct gpio_desc *resetb_gpio; 239 struct gpio_desc *pwdn_gpio; 240 unsigned int mbus_config; /* Media bus configuration flags */ 241 int min_width; /* Filter out smaller sizes */ 242 int min_height; /* Filter out smaller sizes */ 243 int clock_speed; /* External clock speed (MHz) */ 244 u8 clkrc; /* Clock divider value */ 245 bool use_smbus; /* Use smbus I/O instead of I2C */ 246 bool pll_bypass; 247 bool pclk_hb_disable; 248 const struct ov7670_devtype *devtype; /* Device specifics */ 249 }; 250 251 static inline struct ov7670_info *to_state(struct v4l2_subdev *sd) 252 { 253 return container_of(sd, struct ov7670_info, sd); 254 } 255 256 static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) 257 { 258 return &container_of(ctrl->handler, struct ov7670_info, hdl)->sd; 259 } 260 261 262 263 /* 264 * The default register settings, as obtained from OmniVision. There 265 * is really no making sense of most of these - lots of "reserved" values 266 * and such. 267 * 268 * These settings give VGA YUYV. 269 */ 270 271 struct regval_list { 272 unsigned char reg_num; 273 unsigned char value; 274 }; 275 276 static struct regval_list ov7670_default_regs[] = { 277 { REG_COM7, COM7_RESET }, 278 /* 279 * Clock scale: 3 = 15fps 280 * 2 = 20fps 281 * 1 = 30fps 282 */ 283 { REG_CLKRC, 0x1 }, /* OV: clock scale (30 fps) */ 284 { REG_TSLB, 0x04 }, /* OV */ 285 { REG_COM7, 0 }, /* VGA */ 286 /* 287 * Set the hardware window. These values from OV don't entirely 288 * make sense - hstop is less than hstart. But they work... 289 */ 290 { REG_HSTART, 0x13 }, { REG_HSTOP, 0x01 }, 291 { REG_HREF, 0xb6 }, { REG_VSTART, 0x02 }, 292 { REG_VSTOP, 0x7a }, { REG_VREF, 0x0a }, 293 294 { REG_COM3, 0 }, { REG_COM14, 0 }, 295 /* Mystery scaling numbers */ 296 { REG_SCALING_XSC, 0x3a }, 297 { REG_SCALING_YSC, 0x35 }, 298 { 0x72, 0x11 }, { 0x73, 0xf0 }, 299 { 0xa2, 0x02 }, { REG_COM10, 0x0 }, 300 301 /* Gamma curve values */ 302 { 0x7a, 0x20 }, { 0x7b, 0x10 }, 303 { 0x7c, 0x1e }, { 0x7d, 0x35 }, 304 { 0x7e, 0x5a }, { 0x7f, 0x69 }, 305 { 0x80, 0x76 }, { 0x81, 0x80 }, 306 { 0x82, 0x88 }, { 0x83, 0x8f }, 307 { 0x84, 0x96 }, { 0x85, 0xa3 }, 308 { 0x86, 0xaf }, { 0x87, 0xc4 }, 309 { 0x88, 0xd7 }, { 0x89, 0xe8 }, 310 311 /* AGC and AEC parameters. Note we start by disabling those features, 312 then turn them only after tweaking the values. */ 313 { REG_COM8, COM8_FASTAEC | COM8_AECSTEP | COM8_BFILT }, 314 { REG_GAIN, 0 }, { REG_AECH, 0 }, 315 { REG_COM4, 0x40 }, /* magic reserved bit */ 316 { REG_COM9, 0x18 }, /* 4x gain + magic rsvd bit */ 317 { REG_BD50MAX, 0x05 }, { REG_BD60MAX, 0x07 }, 318 { REG_AEW, 0x95 }, { REG_AEB, 0x33 }, 319 { REG_VPT, 0xe3 }, { REG_HAECC1, 0x78 }, 320 { REG_HAECC2, 0x68 }, { 0xa1, 0x03 }, /* magic */ 321 { REG_HAECC3, 0xd8 }, { REG_HAECC4, 0xd8 }, 322 { REG_HAECC5, 0xf0 }, { REG_HAECC6, 0x90 }, 323 { REG_HAECC7, 0x94 }, 324 { REG_COM8, COM8_FASTAEC|COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC }, 325 326 /* Almost all of these are magic "reserved" values. */ 327 { REG_COM5, 0x61 }, { REG_COM6, 0x4b }, 328 { 0x16, 0x02 }, { REG_MVFP, 0x07 }, 329 { 0x21, 0x02 }, { 0x22, 0x91 }, 330 { 0x29, 0x07 }, { 0x33, 0x0b }, 331 { 0x35, 0x0b }, { 0x37, 0x1d }, 332 { 0x38, 0x71 }, { 0x39, 0x2a }, 333 { REG_COM12, 0x78 }, { 0x4d, 0x40 }, 334 { 0x4e, 0x20 }, { REG_GFIX, 0 }, 335 { 0x6b, 0x4a }, { 0x74, 0x10 }, 336 { 0x8d, 0x4f }, { 0x8e, 0 }, 337 { 0x8f, 0 }, { 0x90, 0 }, 338 { 0x91, 0 }, { 0x96, 0 }, 339 { 0x9a, 0 }, { 0xb0, 0x84 }, 340 { 0xb1, 0x0c }, { 0xb2, 0x0e }, 341 { 0xb3, 0x82 }, { 0xb8, 0x0a }, 342 343 /* More reserved magic, some of which tweaks white balance */ 344 { 0x43, 0x0a }, { 0x44, 0xf0 }, 345 { 0x45, 0x34 }, { 0x46, 0x58 }, 346 { 0x47, 0x28 }, { 0x48, 0x3a }, 347 { 0x59, 0x88 }, { 0x5a, 0x88 }, 348 { 0x5b, 0x44 }, { 0x5c, 0x67 }, 349 { 0x5d, 0x49 }, { 0x5e, 0x0e }, 350 { 0x6c, 0x0a }, { 0x6d, 0x55 }, 351 { 0x6e, 0x11 }, { 0x6f, 0x9f }, /* "9e for advance AWB" */ 352 { 0x6a, 0x40 }, { REG_BLUE, 0x40 }, 353 { REG_RED, 0x60 }, 354 { REG_COM8, COM8_FASTAEC|COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC|COM8_AWB }, 355 356 /* Matrix coefficients */ 357 { 0x4f, 0x80 }, { 0x50, 0x80 }, 358 { 0x51, 0 }, { 0x52, 0x22 }, 359 { 0x53, 0x5e }, { 0x54, 0x80 }, 360 { 0x58, 0x9e }, 361 362 { REG_COM16, COM16_AWBGAIN }, { REG_EDGE, 0 }, 363 { 0x75, 0x05 }, { 0x76, 0xe1 }, 364 { 0x4c, 0 }, { 0x77, 0x01 }, 365 { REG_COM13, 0xc3 }, { 0x4b, 0x09 }, 366 { 0xc9, 0x60 }, { REG_COM16, 0x38 }, 367 { 0x56, 0x40 }, 368 369 { 0x34, 0x11 }, { REG_COM11, COM11_EXP|COM11_HZAUTO }, 370 { 0xa4, 0x88 }, { 0x96, 0 }, 371 { 0x97, 0x30 }, { 0x98, 0x20 }, 372 { 0x99, 0x30 }, { 0x9a, 0x84 }, 373 { 0x9b, 0x29 }, { 0x9c, 0x03 }, 374 { 0x9d, 0x4c }, { 0x9e, 0x3f }, 375 { 0x78, 0x04 }, 376 377 /* Extra-weird stuff. Some sort of multiplexor register */ 378 { 0x79, 0x01 }, { 0xc8, 0xf0 }, 379 { 0x79, 0x0f }, { 0xc8, 0x00 }, 380 { 0x79, 0x10 }, { 0xc8, 0x7e }, 381 { 0x79, 0x0a }, { 0xc8, 0x80 }, 382 { 0x79, 0x0b }, { 0xc8, 0x01 }, 383 { 0x79, 0x0c }, { 0xc8, 0x0f }, 384 { 0x79, 0x0d }, { 0xc8, 0x20 }, 385 { 0x79, 0x09 }, { 0xc8, 0x80 }, 386 { 0x79, 0x02 }, { 0xc8, 0xc0 }, 387 { 0x79, 0x03 }, { 0xc8, 0x40 }, 388 { 0x79, 0x05 }, { 0xc8, 0x30 }, 389 { 0x79, 0x26 }, 390 391 { 0xff, 0xff }, /* END MARKER */ 392 }; 393 394 395 /* 396 * Here we'll try to encapsulate the changes for just the output 397 * video format. 398 * 399 * RGB656 and YUV422 come from OV; RGB444 is homebrewed. 400 * 401 * IMPORTANT RULE: the first entry must be for COM7, see ov7670_s_fmt for why. 402 */ 403 404 405 static struct regval_list ov7670_fmt_yuv422[] = { 406 { REG_COM7, 0x0 }, /* Selects YUV mode */ 407 { REG_RGB444, 0 }, /* No RGB444 please */ 408 { REG_COM1, 0 }, /* CCIR601 */ 409 { REG_COM15, COM15_R00FF }, 410 { REG_COM9, 0x48 }, /* 32x gain ceiling; 0x8 is reserved bit */ 411 { 0x4f, 0x80 }, /* "matrix coefficient 1" */ 412 { 0x50, 0x80 }, /* "matrix coefficient 2" */ 413 { 0x51, 0 }, /* vb */ 414 { 0x52, 0x22 }, /* "matrix coefficient 4" */ 415 { 0x53, 0x5e }, /* "matrix coefficient 5" */ 416 { 0x54, 0x80 }, /* "matrix coefficient 6" */ 417 { REG_COM13, COM13_GAMMA|COM13_UVSAT }, 418 { 0xff, 0xff }, 419 }; 420 421 static struct regval_list ov7670_fmt_rgb565[] = { 422 { REG_COM7, COM7_RGB }, /* Selects RGB mode */ 423 { REG_RGB444, 0 }, /* No RGB444 please */ 424 { REG_COM1, 0x0 }, /* CCIR601 */ 425 { REG_COM15, COM15_RGB565 }, 426 { REG_COM9, 0x38 }, /* 16x gain ceiling; 0x8 is reserved bit */ 427 { 0x4f, 0xb3 }, /* "matrix coefficient 1" */ 428 { 0x50, 0xb3 }, /* "matrix coefficient 2" */ 429 { 0x51, 0 }, /* vb */ 430 { 0x52, 0x3d }, /* "matrix coefficient 4" */ 431 { 0x53, 0xa7 }, /* "matrix coefficient 5" */ 432 { 0x54, 0xe4 }, /* "matrix coefficient 6" */ 433 { REG_COM13, COM13_GAMMA|COM13_UVSAT }, 434 { 0xff, 0xff }, 435 }; 436 437 static struct regval_list ov7670_fmt_rgb444[] = { 438 { REG_COM7, COM7_RGB }, /* Selects RGB mode */ 439 { REG_RGB444, R444_ENABLE }, /* Enable xxxxrrrr ggggbbbb */ 440 { REG_COM1, 0x0 }, /* CCIR601 */ 441 { REG_COM15, COM15_R01FE|COM15_RGB565 }, /* Data range needed? */ 442 { REG_COM9, 0x38 }, /* 16x gain ceiling; 0x8 is reserved bit */ 443 { 0x4f, 0xb3 }, /* "matrix coefficient 1" */ 444 { 0x50, 0xb3 }, /* "matrix coefficient 2" */ 445 { 0x51, 0 }, /* vb */ 446 { 0x52, 0x3d }, /* "matrix coefficient 4" */ 447 { 0x53, 0xa7 }, /* "matrix coefficient 5" */ 448 { 0x54, 0xe4 }, /* "matrix coefficient 6" */ 449 { REG_COM13, COM13_GAMMA|COM13_UVSAT|0x2 }, /* Magic rsvd bit */ 450 { 0xff, 0xff }, 451 }; 452 453 static struct regval_list ov7670_fmt_raw[] = { 454 { REG_COM7, COM7_BAYER }, 455 { REG_COM13, 0x08 }, /* No gamma, magic rsvd bit */ 456 { REG_COM16, 0x3d }, /* Edge enhancement, denoise */ 457 { REG_REG76, 0xe1 }, /* Pix correction, magic rsvd */ 458 { 0xff, 0xff }, 459 }; 460 461 462 463 /* 464 * Low-level register I/O. 465 * 466 * Note that there are two versions of these. On the XO 1, the 467 * i2c controller only does SMBUS, so that's what we use. The 468 * ov7670 is not really an SMBUS device, though, so the communication 469 * is not always entirely reliable. 470 */ 471 static int ov7670_read_smbus(struct v4l2_subdev *sd, unsigned char reg, 472 unsigned char *value) 473 { 474 struct i2c_client *client = v4l2_get_subdevdata(sd); 475 int ret; 476 477 ret = i2c_smbus_read_byte_data(client, reg); 478 if (ret >= 0) { 479 *value = (unsigned char)ret; 480 ret = 0; 481 } 482 return ret; 483 } 484 485 486 static int ov7670_write_smbus(struct v4l2_subdev *sd, unsigned char reg, 487 unsigned char value) 488 { 489 struct i2c_client *client = v4l2_get_subdevdata(sd); 490 int ret = i2c_smbus_write_byte_data(client, reg, value); 491 492 if (reg == REG_COM7 && (value & COM7_RESET)) 493 msleep(5); /* Wait for reset to run */ 494 return ret; 495 } 496 497 /* 498 * On most platforms, we'd rather do straight i2c I/O. 499 */ 500 static int ov7670_read_i2c(struct v4l2_subdev *sd, unsigned char reg, 501 unsigned char *value) 502 { 503 struct i2c_client *client = v4l2_get_subdevdata(sd); 504 u8 data = reg; 505 struct i2c_msg msg; 506 int ret; 507 508 /* 509 * Send out the register address... 510 */ 511 msg.addr = client->addr; 512 msg.flags = 0; 513 msg.len = 1; 514 msg.buf = &data; 515 ret = i2c_transfer(client->adapter, &msg, 1); 516 if (ret < 0) { 517 printk(KERN_ERR "Error %d on register write\n", ret); 518 return ret; 519 } 520 /* 521 * ...then read back the result. 522 */ 523 msg.flags = I2C_M_RD; 524 ret = i2c_transfer(client->adapter, &msg, 1); 525 if (ret >= 0) { 526 *value = data; 527 ret = 0; 528 } 529 return ret; 530 } 531 532 533 static int ov7670_write_i2c(struct v4l2_subdev *sd, unsigned char reg, 534 unsigned char value) 535 { 536 struct i2c_client *client = v4l2_get_subdevdata(sd); 537 struct i2c_msg msg; 538 unsigned char data[2] = { reg, value }; 539 int ret; 540 541 msg.addr = client->addr; 542 msg.flags = 0; 543 msg.len = 2; 544 msg.buf = data; 545 ret = i2c_transfer(client->adapter, &msg, 1); 546 if (ret > 0) 547 ret = 0; 548 if (reg == REG_COM7 && (value & COM7_RESET)) 549 msleep(5); /* Wait for reset to run */ 550 return ret; 551 } 552 553 static int ov7670_read(struct v4l2_subdev *sd, unsigned char reg, 554 unsigned char *value) 555 { 556 struct ov7670_info *info = to_state(sd); 557 558 if (info->use_smbus) 559 return ov7670_read_smbus(sd, reg, value); 560 else 561 return ov7670_read_i2c(sd, reg, value); 562 } 563 564 static int ov7670_write(struct v4l2_subdev *sd, unsigned char reg, 565 unsigned char value) 566 { 567 struct ov7670_info *info = to_state(sd); 568 569 if (info->use_smbus) 570 return ov7670_write_smbus(sd, reg, value); 571 else 572 return ov7670_write_i2c(sd, reg, value); 573 } 574 575 static int ov7670_update_bits(struct v4l2_subdev *sd, unsigned char reg, 576 unsigned char mask, unsigned char value) 577 { 578 unsigned char orig; 579 int ret; 580 581 ret = ov7670_read(sd, reg, &orig); 582 if (ret) 583 return ret; 584 585 return ov7670_write(sd, reg, (orig & ~mask) | (value & mask)); 586 } 587 588 /* 589 * Write a list of register settings; ff/ff stops the process. 590 */ 591 static int ov7670_write_array(struct v4l2_subdev *sd, struct regval_list *vals) 592 { 593 while (vals->reg_num != 0xff || vals->value != 0xff) { 594 int ret = ov7670_write(sd, vals->reg_num, vals->value); 595 596 if (ret < 0) 597 return ret; 598 vals++; 599 } 600 return 0; 601 } 602 603 604 /* 605 * Stuff that knows about the sensor. 606 */ 607 static int ov7670_reset(struct v4l2_subdev *sd, u32 val) 608 { 609 ov7670_write(sd, REG_COM7, COM7_RESET); 610 msleep(1); 611 return 0; 612 } 613 614 615 static int ov7670_init(struct v4l2_subdev *sd, u32 val) 616 { 617 return ov7670_write_array(sd, ov7670_default_regs); 618 } 619 620 static int ov7670_detect(struct v4l2_subdev *sd) 621 { 622 unsigned char v; 623 int ret; 624 625 ret = ov7670_init(sd, 0); 626 if (ret < 0) 627 return ret; 628 ret = ov7670_read(sd, REG_MIDH, &v); 629 if (ret < 0) 630 return ret; 631 if (v != 0x7f) /* OV manuf. id. */ 632 return -ENODEV; 633 ret = ov7670_read(sd, REG_MIDL, &v); 634 if (ret < 0) 635 return ret; 636 if (v != 0xa2) 637 return -ENODEV; 638 /* 639 * OK, we know we have an OmniVision chip...but which one? 640 */ 641 ret = ov7670_read(sd, REG_PID, &v); 642 if (ret < 0) 643 return ret; 644 if (v != 0x76) /* PID + VER = 0x76 / 0x73 */ 645 return -ENODEV; 646 ret = ov7670_read(sd, REG_VER, &v); 647 if (ret < 0) 648 return ret; 649 if (v != 0x73) /* PID + VER = 0x76 / 0x73 */ 650 return -ENODEV; 651 return 0; 652 } 653 654 655 /* 656 * Store information about the video data format. The color matrix 657 * is deeply tied into the format, so keep the relevant values here. 658 * The magic matrix numbers come from OmniVision. 659 */ 660 static struct ov7670_format_struct { 661 u32 mbus_code; 662 enum v4l2_colorspace colorspace; 663 struct regval_list *regs; 664 int cmatrix[CMATRIX_LEN]; 665 } ov7670_formats[] = { 666 { 667 .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8, 668 .colorspace = V4L2_COLORSPACE_SRGB, 669 .regs = ov7670_fmt_yuv422, 670 .cmatrix = { 128, -128, 0, -34, -94, 128 }, 671 }, 672 { 673 .mbus_code = MEDIA_BUS_FMT_RGB444_2X8_PADHI_LE, 674 .colorspace = V4L2_COLORSPACE_SRGB, 675 .regs = ov7670_fmt_rgb444, 676 .cmatrix = { 179, -179, 0, -61, -176, 228 }, 677 }, 678 { 679 .mbus_code = MEDIA_BUS_FMT_RGB565_2X8_LE, 680 .colorspace = V4L2_COLORSPACE_SRGB, 681 .regs = ov7670_fmt_rgb565, 682 .cmatrix = { 179, -179, 0, -61, -176, 228 }, 683 }, 684 { 685 .mbus_code = MEDIA_BUS_FMT_SBGGR8_1X8, 686 .colorspace = V4L2_COLORSPACE_SRGB, 687 .regs = ov7670_fmt_raw, 688 .cmatrix = { 0, 0, 0, 0, 0, 0 }, 689 }, 690 }; 691 #define N_OV7670_FMTS ARRAY_SIZE(ov7670_formats) 692 693 694 /* 695 * Then there is the issue of window sizes. Try to capture the info here. 696 */ 697 698 /* 699 * QCIF mode is done (by OV) in a very strange way - it actually looks like 700 * VGA with weird scaling options - they do *not* use the canned QCIF mode 701 * which is allegedly provided by the sensor. So here's the weird register 702 * settings. 703 */ 704 static struct regval_list ov7670_qcif_regs[] = { 705 { REG_COM3, COM3_SCALEEN|COM3_DCWEN }, 706 { REG_COM3, COM3_DCWEN }, 707 { REG_COM14, COM14_DCWEN | 0x01}, 708 { 0x73, 0xf1 }, 709 { 0xa2, 0x52 }, 710 { 0x7b, 0x1c }, 711 { 0x7c, 0x28 }, 712 { 0x7d, 0x3c }, 713 { 0x7f, 0x69 }, 714 { REG_COM9, 0x38 }, 715 { 0xa1, 0x0b }, 716 { 0x74, 0x19 }, 717 { 0x9a, 0x80 }, 718 { 0x43, 0x14 }, 719 { REG_COM13, 0xc0 }, 720 { 0xff, 0xff }, 721 }; 722 723 static struct ov7670_win_size ov7670_win_sizes[] = { 724 /* VGA */ 725 { 726 .width = VGA_WIDTH, 727 .height = VGA_HEIGHT, 728 .com7_bit = COM7_FMT_VGA, 729 .hstart = 158, /* These values from */ 730 .hstop = 14, /* Omnivision */ 731 .vstart = 10, 732 .vstop = 490, 733 .regs = NULL, 734 }, 735 /* CIF */ 736 { 737 .width = CIF_WIDTH, 738 .height = CIF_HEIGHT, 739 .com7_bit = COM7_FMT_CIF, 740 .hstart = 170, /* Empirically determined */ 741 .hstop = 90, 742 .vstart = 14, 743 .vstop = 494, 744 .regs = NULL, 745 }, 746 /* QVGA */ 747 { 748 .width = QVGA_WIDTH, 749 .height = QVGA_HEIGHT, 750 .com7_bit = COM7_FMT_QVGA, 751 .hstart = 168, /* Empirically determined */ 752 .hstop = 24, 753 .vstart = 12, 754 .vstop = 492, 755 .regs = NULL, 756 }, 757 /* QCIF */ 758 { 759 .width = QCIF_WIDTH, 760 .height = QCIF_HEIGHT, 761 .com7_bit = COM7_FMT_VGA, /* see comment above */ 762 .hstart = 456, /* Empirically determined */ 763 .hstop = 24, 764 .vstart = 14, 765 .vstop = 494, 766 .regs = ov7670_qcif_regs, 767 } 768 }; 769 770 static struct ov7670_win_size ov7675_win_sizes[] = { 771 /* 772 * Currently, only VGA is supported. Theoretically it could be possible 773 * to support CIF, QVGA and QCIF too. Taking values for ov7670 as a 774 * base and tweak them empirically could be required. 775 */ 776 { 777 .width = VGA_WIDTH, 778 .height = VGA_HEIGHT, 779 .com7_bit = COM7_FMT_VGA, 780 .hstart = 158, /* These values from */ 781 .hstop = 14, /* Omnivision */ 782 .vstart = 14, /* Empirically determined */ 783 .vstop = 494, 784 .regs = NULL, 785 } 786 }; 787 788 static void ov7675_get_framerate(struct v4l2_subdev *sd, 789 struct v4l2_fract *tpf) 790 { 791 struct ov7670_info *info = to_state(sd); 792 u32 clkrc = info->clkrc; 793 int pll_factor; 794 795 if (info->pll_bypass) 796 pll_factor = 1; 797 else 798 pll_factor = PLL_FACTOR; 799 800 clkrc++; 801 if (info->fmt->mbus_code == MEDIA_BUS_FMT_SBGGR8_1X8) 802 clkrc = (clkrc >> 1); 803 804 tpf->numerator = 1; 805 tpf->denominator = (5 * pll_factor * info->clock_speed) / 806 (4 * clkrc); 807 } 808 809 static int ov7675_apply_framerate(struct v4l2_subdev *sd) 810 { 811 struct ov7670_info *info = to_state(sd); 812 int ret; 813 814 ret = ov7670_write(sd, REG_CLKRC, info->clkrc); 815 if (ret < 0) 816 return ret; 817 818 return ov7670_write(sd, REG_DBLV, 819 info->pll_bypass ? DBLV_BYPASS : DBLV_X4); 820 } 821 822 static int ov7675_set_framerate(struct v4l2_subdev *sd, 823 struct v4l2_fract *tpf) 824 { 825 struct ov7670_info *info = to_state(sd); 826 u32 clkrc; 827 int pll_factor; 828 829 /* 830 * The formula is fps = 5/4*pixclk for YUV/RGB and 831 * fps = 5/2*pixclk for RAW. 832 * 833 * pixclk = clock_speed / (clkrc + 1) * PLLfactor 834 * 835 */ 836 if (tpf->numerator == 0 || tpf->denominator == 0) { 837 clkrc = 0; 838 } else { 839 pll_factor = info->pll_bypass ? 1 : PLL_FACTOR; 840 clkrc = (5 * pll_factor * info->clock_speed * tpf->numerator) / 841 (4 * tpf->denominator); 842 if (info->fmt->mbus_code == MEDIA_BUS_FMT_SBGGR8_1X8) 843 clkrc = (clkrc << 1); 844 clkrc--; 845 } 846 847 /* 848 * The datasheet claims that clkrc = 0 will divide the input clock by 1 849 * but we've checked with an oscilloscope that it divides by 2 instead. 850 * So, if clkrc = 0 just bypass the divider. 851 */ 852 if (clkrc <= 0) 853 clkrc = CLK_EXT; 854 else if (clkrc > CLK_SCALE) 855 clkrc = CLK_SCALE; 856 info->clkrc = clkrc; 857 858 /* Recalculate frame rate */ 859 ov7675_get_framerate(sd, tpf); 860 861 /* 862 * If the device is not powered up by the host driver do 863 * not apply any changes to H/W at this time. Instead 864 * the framerate will be restored right after power-up. 865 */ 866 if (info->on) 867 return ov7675_apply_framerate(sd); 868 869 return 0; 870 } 871 872 static void ov7670_get_framerate_legacy(struct v4l2_subdev *sd, 873 struct v4l2_fract *tpf) 874 { 875 struct ov7670_info *info = to_state(sd); 876 877 tpf->numerator = 1; 878 tpf->denominator = info->clock_speed; 879 if ((info->clkrc & CLK_EXT) == 0 && (info->clkrc & CLK_SCALE) > 1) 880 tpf->denominator /= (info->clkrc & CLK_SCALE); 881 } 882 883 static int ov7670_set_framerate_legacy(struct v4l2_subdev *sd, 884 struct v4l2_fract *tpf) 885 { 886 struct ov7670_info *info = to_state(sd); 887 int div; 888 889 if (tpf->numerator == 0 || tpf->denominator == 0) 890 div = 1; /* Reset to full rate */ 891 else 892 div = (tpf->numerator * info->clock_speed) / tpf->denominator; 893 if (div == 0) 894 div = 1; 895 else if (div > CLK_SCALE) 896 div = CLK_SCALE; 897 info->clkrc = (info->clkrc & 0x80) | div; 898 tpf->numerator = 1; 899 tpf->denominator = info->clock_speed / div; 900 901 /* 902 * If the device is not powered up by the host driver do 903 * not apply any changes to H/W at this time. Instead 904 * the framerate will be restored right after power-up. 905 */ 906 if (info->on) 907 return ov7670_write(sd, REG_CLKRC, info->clkrc); 908 909 return 0; 910 } 911 912 /* 913 * Store a set of start/stop values into the camera. 914 */ 915 static int ov7670_set_hw(struct v4l2_subdev *sd, int hstart, int hstop, 916 int vstart, int vstop) 917 { 918 int ret; 919 unsigned char v; 920 /* 921 * Horizontal: 11 bits, top 8 live in hstart and hstop. Bottom 3 of 922 * hstart are in href[2:0], bottom 3 of hstop in href[5:3]. There is 923 * a mystery "edge offset" value in the top two bits of href. 924 */ 925 ret = ov7670_write(sd, REG_HSTART, (hstart >> 3) & 0xff); 926 if (ret) 927 return ret; 928 ret = ov7670_write(sd, REG_HSTOP, (hstop >> 3) & 0xff); 929 if (ret) 930 return ret; 931 ret = ov7670_read(sd, REG_HREF, &v); 932 if (ret) 933 return ret; 934 v = (v & 0xc0) | ((hstop & 0x7) << 3) | (hstart & 0x7); 935 msleep(10); 936 ret = ov7670_write(sd, REG_HREF, v); 937 if (ret) 938 return ret; 939 /* Vertical: similar arrangement, but only 10 bits. */ 940 ret = ov7670_write(sd, REG_VSTART, (vstart >> 2) & 0xff); 941 if (ret) 942 return ret; 943 ret = ov7670_write(sd, REG_VSTOP, (vstop >> 2) & 0xff); 944 if (ret) 945 return ret; 946 ret = ov7670_read(sd, REG_VREF, &v); 947 if (ret) 948 return ret; 949 v = (v & 0xf0) | ((vstop & 0x3) << 2) | (vstart & 0x3); 950 msleep(10); 951 return ov7670_write(sd, REG_VREF, v); 952 } 953 954 955 static int ov7670_enum_mbus_code(struct v4l2_subdev *sd, 956 struct v4l2_subdev_state *sd_state, 957 struct v4l2_subdev_mbus_code_enum *code) 958 { 959 if (code->pad || code->index >= N_OV7670_FMTS) 960 return -EINVAL; 961 962 code->code = ov7670_formats[code->index].mbus_code; 963 return 0; 964 } 965 966 static int ov7670_try_fmt_internal(struct v4l2_subdev *sd, 967 struct v4l2_mbus_framefmt *fmt, 968 struct ov7670_format_struct **ret_fmt, 969 struct ov7670_win_size **ret_wsize) 970 { 971 int index, i; 972 struct ov7670_win_size *wsize; 973 struct ov7670_info *info = to_state(sd); 974 unsigned int n_win_sizes = info->devtype->n_win_sizes; 975 unsigned int win_sizes_limit = n_win_sizes; 976 977 for (index = 0; index < N_OV7670_FMTS; index++) 978 if (ov7670_formats[index].mbus_code == fmt->code) 979 break; 980 if (index >= N_OV7670_FMTS) { 981 /* default to first format */ 982 index = 0; 983 fmt->code = ov7670_formats[0].mbus_code; 984 } 985 if (ret_fmt != NULL) 986 *ret_fmt = ov7670_formats + index; 987 /* 988 * Fields: the OV devices claim to be progressive. 989 */ 990 fmt->field = V4L2_FIELD_NONE; 991 992 /* 993 * Don't consider values that don't match min_height and min_width 994 * constraints. 995 */ 996 if (info->min_width || info->min_height) 997 for (i = 0; i < n_win_sizes; i++) { 998 wsize = info->devtype->win_sizes + i; 999 1000 if (wsize->width < info->min_width || 1001 wsize->height < info->min_height) { 1002 win_sizes_limit = i; 1003 break; 1004 } 1005 } 1006 /* 1007 * Round requested image size down to the nearest 1008 * we support, but not below the smallest. 1009 */ 1010 for (wsize = info->devtype->win_sizes; 1011 wsize < info->devtype->win_sizes + win_sizes_limit; wsize++) 1012 if (fmt->width >= wsize->width && fmt->height >= wsize->height) 1013 break; 1014 if (wsize >= info->devtype->win_sizes + win_sizes_limit) 1015 wsize--; /* Take the smallest one */ 1016 if (ret_wsize != NULL) 1017 *ret_wsize = wsize; 1018 /* 1019 * Note the size we'll actually handle. 1020 */ 1021 fmt->width = wsize->width; 1022 fmt->height = wsize->height; 1023 fmt->colorspace = ov7670_formats[index].colorspace; 1024 1025 info->format = *fmt; 1026 1027 return 0; 1028 } 1029 1030 static int ov7670_apply_fmt(struct v4l2_subdev *sd) 1031 { 1032 struct ov7670_info *info = to_state(sd); 1033 struct ov7670_win_size *wsize = info->wsize; 1034 unsigned char com7, com10 = 0; 1035 int ret; 1036 1037 /* 1038 * COM7 is a pain in the ass, it doesn't like to be read then 1039 * quickly written afterward. But we have everything we need 1040 * to set it absolutely here, as long as the format-specific 1041 * register sets list it first. 1042 */ 1043 com7 = info->fmt->regs[0].value; 1044 com7 |= wsize->com7_bit; 1045 ret = ov7670_write(sd, REG_COM7, com7); 1046 if (ret) 1047 return ret; 1048 1049 /* 1050 * Configure the media bus through COM10 register 1051 */ 1052 if (info->mbus_config & V4L2_MBUS_VSYNC_ACTIVE_LOW) 1053 com10 |= COM10_VS_NEG; 1054 if (info->mbus_config & V4L2_MBUS_HSYNC_ACTIVE_LOW) 1055 com10 |= COM10_HREF_REV; 1056 if (info->pclk_hb_disable) 1057 com10 |= COM10_PCLK_HB; 1058 ret = ov7670_write(sd, REG_COM10, com10); 1059 if (ret) 1060 return ret; 1061 1062 /* 1063 * Now write the rest of the array. Also store start/stops 1064 */ 1065 ret = ov7670_write_array(sd, info->fmt->regs + 1); 1066 if (ret) 1067 return ret; 1068 1069 ret = ov7670_set_hw(sd, wsize->hstart, wsize->hstop, wsize->vstart, 1070 wsize->vstop); 1071 if (ret) 1072 return ret; 1073 1074 if (wsize->regs) { 1075 ret = ov7670_write_array(sd, wsize->regs); 1076 if (ret) 1077 return ret; 1078 } 1079 1080 /* 1081 * If we're running RGB565, we must rewrite clkrc after setting 1082 * the other parameters or the image looks poor. If we're *not* 1083 * doing RGB565, we must not rewrite clkrc or the image looks 1084 * *really* poor. 1085 * 1086 * (Update) Now that we retain clkrc state, we should be able 1087 * to write it unconditionally, and that will make the frame 1088 * rate persistent too. 1089 */ 1090 ret = ov7670_write(sd, REG_CLKRC, info->clkrc); 1091 if (ret) 1092 return ret; 1093 1094 return 0; 1095 } 1096 1097 /* 1098 * Set a format. 1099 */ 1100 static int ov7670_set_fmt(struct v4l2_subdev *sd, 1101 struct v4l2_subdev_state *sd_state, 1102 struct v4l2_subdev_format *format) 1103 { 1104 struct ov7670_info *info = to_state(sd); 1105 struct v4l2_mbus_framefmt *mbus_fmt; 1106 int ret; 1107 1108 if (format->pad) 1109 return -EINVAL; 1110 1111 if (format->which == V4L2_SUBDEV_FORMAT_TRY) { 1112 ret = ov7670_try_fmt_internal(sd, &format->format, NULL, NULL); 1113 if (ret) 1114 return ret; 1115 mbus_fmt = v4l2_subdev_get_try_format(sd, sd_state, 1116 format->pad); 1117 *mbus_fmt = format->format; 1118 return 0; 1119 } 1120 1121 ret = ov7670_try_fmt_internal(sd, &format->format, &info->fmt, &info->wsize); 1122 if (ret) 1123 return ret; 1124 1125 /* 1126 * If the device is not powered up by the host driver do 1127 * not apply any changes to H/W at this time. Instead 1128 * the frame format will be restored right after power-up. 1129 */ 1130 if (info->on) 1131 return ov7670_apply_fmt(sd); 1132 1133 return 0; 1134 } 1135 1136 static int ov7670_get_fmt(struct v4l2_subdev *sd, 1137 struct v4l2_subdev_state *sd_state, 1138 struct v4l2_subdev_format *format) 1139 { 1140 struct ov7670_info *info = to_state(sd); 1141 struct v4l2_mbus_framefmt *mbus_fmt; 1142 1143 if (format->which == V4L2_SUBDEV_FORMAT_TRY) { 1144 mbus_fmt = v4l2_subdev_get_try_format(sd, sd_state, 0); 1145 format->format = *mbus_fmt; 1146 return 0; 1147 } else { 1148 format->format = info->format; 1149 } 1150 1151 return 0; 1152 } 1153 1154 /* 1155 * Implement G/S_PARM. There is a "high quality" mode we could try 1156 * to do someday; for now, we just do the frame rate tweak. 1157 */ 1158 static int ov7670_g_frame_interval(struct v4l2_subdev *sd, 1159 struct v4l2_subdev_frame_interval *ival) 1160 { 1161 struct ov7670_info *info = to_state(sd); 1162 1163 1164 info->devtype->get_framerate(sd, &ival->interval); 1165 1166 return 0; 1167 } 1168 1169 static int ov7670_s_frame_interval(struct v4l2_subdev *sd, 1170 struct v4l2_subdev_frame_interval *ival) 1171 { 1172 struct v4l2_fract *tpf = &ival->interval; 1173 struct ov7670_info *info = to_state(sd); 1174 1175 1176 return info->devtype->set_framerate(sd, tpf); 1177 } 1178 1179 1180 /* 1181 * Frame intervals. Since frame rates are controlled with the clock 1182 * divider, we can only do 30/n for integer n values. So no continuous 1183 * or stepwise options. Here we just pick a handful of logical values. 1184 */ 1185 1186 static int ov7670_frame_rates[] = { 30, 15, 10, 5, 1 }; 1187 1188 static int ov7670_enum_frame_interval(struct v4l2_subdev *sd, 1189 struct v4l2_subdev_state *sd_state, 1190 struct v4l2_subdev_frame_interval_enum *fie) 1191 { 1192 struct ov7670_info *info = to_state(sd); 1193 unsigned int n_win_sizes = info->devtype->n_win_sizes; 1194 int i; 1195 1196 if (fie->pad) 1197 return -EINVAL; 1198 if (fie->index >= ARRAY_SIZE(ov7670_frame_rates)) 1199 return -EINVAL; 1200 1201 /* 1202 * Check if the width/height is valid. 1203 * 1204 * If a minimum width/height was requested, filter out the capture 1205 * windows that fall outside that. 1206 */ 1207 for (i = 0; i < n_win_sizes; i++) { 1208 struct ov7670_win_size *win = &info->devtype->win_sizes[i]; 1209 1210 if (info->min_width && win->width < info->min_width) 1211 continue; 1212 if (info->min_height && win->height < info->min_height) 1213 continue; 1214 if (fie->width == win->width && fie->height == win->height) 1215 break; 1216 } 1217 if (i == n_win_sizes) 1218 return -EINVAL; 1219 fie->interval.numerator = 1; 1220 fie->interval.denominator = ov7670_frame_rates[fie->index]; 1221 return 0; 1222 } 1223 1224 /* 1225 * Frame size enumeration 1226 */ 1227 static int ov7670_enum_frame_size(struct v4l2_subdev *sd, 1228 struct v4l2_subdev_state *sd_state, 1229 struct v4l2_subdev_frame_size_enum *fse) 1230 { 1231 struct ov7670_info *info = to_state(sd); 1232 int i; 1233 int num_valid = -1; 1234 __u32 index = fse->index; 1235 unsigned int n_win_sizes = info->devtype->n_win_sizes; 1236 1237 if (fse->pad) 1238 return -EINVAL; 1239 1240 /* 1241 * If a minimum width/height was requested, filter out the capture 1242 * windows that fall outside that. 1243 */ 1244 for (i = 0; i < n_win_sizes; i++) { 1245 struct ov7670_win_size *win = &info->devtype->win_sizes[i]; 1246 1247 if (info->min_width && win->width < info->min_width) 1248 continue; 1249 if (info->min_height && win->height < info->min_height) 1250 continue; 1251 if (index == ++num_valid) { 1252 fse->min_width = fse->max_width = win->width; 1253 fse->min_height = fse->max_height = win->height; 1254 return 0; 1255 } 1256 } 1257 1258 return -EINVAL; 1259 } 1260 1261 /* 1262 * Code for dealing with controls. 1263 */ 1264 1265 static int ov7670_store_cmatrix(struct v4l2_subdev *sd, 1266 int matrix[CMATRIX_LEN]) 1267 { 1268 int i, ret; 1269 unsigned char signbits = 0; 1270 1271 /* 1272 * Weird crap seems to exist in the upper part of 1273 * the sign bits register, so let's preserve it. 1274 */ 1275 ret = ov7670_read(sd, REG_CMATRIX_SIGN, &signbits); 1276 signbits &= 0xc0; 1277 1278 for (i = 0; i < CMATRIX_LEN; i++) { 1279 unsigned char raw; 1280 1281 if (matrix[i] < 0) { 1282 signbits |= (1 << i); 1283 if (matrix[i] < -255) 1284 raw = 0xff; 1285 else 1286 raw = (-1 * matrix[i]) & 0xff; 1287 } else { 1288 if (matrix[i] > 255) 1289 raw = 0xff; 1290 else 1291 raw = matrix[i] & 0xff; 1292 } 1293 ret = ov7670_write(sd, REG_CMATRIX_BASE + i, raw); 1294 if (ret) 1295 return ret; 1296 } 1297 return ov7670_write(sd, REG_CMATRIX_SIGN, signbits); 1298 } 1299 1300 1301 /* 1302 * Hue also requires messing with the color matrix. It also requires 1303 * trig functions, which tend not to be well supported in the kernel. 1304 * So here is a simple table of sine values, 0-90 degrees, in steps 1305 * of five degrees. Values are multiplied by 1000. 1306 * 1307 * The following naive approximate trig functions require an argument 1308 * carefully limited to -180 <= theta <= 180. 1309 */ 1310 #define SIN_STEP 5 1311 static const int ov7670_sin_table[] = { 1312 0, 87, 173, 258, 342, 422, 1313 499, 573, 642, 707, 766, 819, 1314 866, 906, 939, 965, 984, 996, 1315 1000 1316 }; 1317 1318 static int ov7670_sine(int theta) 1319 { 1320 int chs = 1; 1321 int sine; 1322 1323 if (theta < 0) { 1324 theta = -theta; 1325 chs = -1; 1326 } 1327 if (theta <= 90) 1328 sine = ov7670_sin_table[theta/SIN_STEP]; 1329 else { 1330 theta -= 90; 1331 sine = 1000 - ov7670_sin_table[theta/SIN_STEP]; 1332 } 1333 return sine*chs; 1334 } 1335 1336 static int ov7670_cosine(int theta) 1337 { 1338 theta = 90 - theta; 1339 if (theta > 180) 1340 theta -= 360; 1341 else if (theta < -180) 1342 theta += 360; 1343 return ov7670_sine(theta); 1344 } 1345 1346 1347 1348 1349 static void ov7670_calc_cmatrix(struct ov7670_info *info, 1350 int matrix[CMATRIX_LEN], int sat, int hue) 1351 { 1352 int i; 1353 /* 1354 * Apply the current saturation setting first. 1355 */ 1356 for (i = 0; i < CMATRIX_LEN; i++) 1357 matrix[i] = (info->fmt->cmatrix[i] * sat) >> 7; 1358 /* 1359 * Then, if need be, rotate the hue value. 1360 */ 1361 if (hue != 0) { 1362 int sinth, costh, tmpmatrix[CMATRIX_LEN]; 1363 1364 memcpy(tmpmatrix, matrix, CMATRIX_LEN*sizeof(int)); 1365 sinth = ov7670_sine(hue); 1366 costh = ov7670_cosine(hue); 1367 1368 matrix[0] = (matrix[3]*sinth + matrix[0]*costh)/1000; 1369 matrix[1] = (matrix[4]*sinth + matrix[1]*costh)/1000; 1370 matrix[2] = (matrix[5]*sinth + matrix[2]*costh)/1000; 1371 matrix[3] = (matrix[3]*costh - matrix[0]*sinth)/1000; 1372 matrix[4] = (matrix[4]*costh - matrix[1]*sinth)/1000; 1373 matrix[5] = (matrix[5]*costh - matrix[2]*sinth)/1000; 1374 } 1375 } 1376 1377 1378 1379 static int ov7670_s_sat_hue(struct v4l2_subdev *sd, int sat, int hue) 1380 { 1381 struct ov7670_info *info = to_state(sd); 1382 int matrix[CMATRIX_LEN]; 1383 1384 ov7670_calc_cmatrix(info, matrix, sat, hue); 1385 return ov7670_store_cmatrix(sd, matrix); 1386 } 1387 1388 1389 /* 1390 * Some weird registers seem to store values in a sign/magnitude format! 1391 */ 1392 1393 static unsigned char ov7670_abs_to_sm(unsigned char v) 1394 { 1395 if (v > 127) 1396 return v & 0x7f; 1397 return (128 - v) | 0x80; 1398 } 1399 1400 static int ov7670_s_brightness(struct v4l2_subdev *sd, int value) 1401 { 1402 unsigned char com8 = 0, v; 1403 1404 ov7670_read(sd, REG_COM8, &com8); 1405 com8 &= ~COM8_AEC; 1406 ov7670_write(sd, REG_COM8, com8); 1407 v = ov7670_abs_to_sm(value); 1408 return ov7670_write(sd, REG_BRIGHT, v); 1409 } 1410 1411 static int ov7670_s_contrast(struct v4l2_subdev *sd, int value) 1412 { 1413 return ov7670_write(sd, REG_CONTRAS, (unsigned char) value); 1414 } 1415 1416 static int ov7670_s_hflip(struct v4l2_subdev *sd, int value) 1417 { 1418 unsigned char v = 0; 1419 int ret; 1420 1421 ret = ov7670_read(sd, REG_MVFP, &v); 1422 if (ret) 1423 return ret; 1424 if (value) 1425 v |= MVFP_MIRROR; 1426 else 1427 v &= ~MVFP_MIRROR; 1428 msleep(10); /* FIXME */ 1429 return ov7670_write(sd, REG_MVFP, v); 1430 } 1431 1432 static int ov7670_s_vflip(struct v4l2_subdev *sd, int value) 1433 { 1434 unsigned char v = 0; 1435 int ret; 1436 1437 ret = ov7670_read(sd, REG_MVFP, &v); 1438 if (ret) 1439 return ret; 1440 if (value) 1441 v |= MVFP_FLIP; 1442 else 1443 v &= ~MVFP_FLIP; 1444 msleep(10); /* FIXME */ 1445 return ov7670_write(sd, REG_MVFP, v); 1446 } 1447 1448 /* 1449 * GAIN is split between REG_GAIN and REG_VREF[7:6]. If one believes 1450 * the data sheet, the VREF parts should be the most significant, but 1451 * experience shows otherwise. There seems to be little value in 1452 * messing with the VREF bits, so we leave them alone. 1453 */ 1454 static int ov7670_g_gain(struct v4l2_subdev *sd, __s32 *value) 1455 { 1456 int ret; 1457 unsigned char gain; 1458 1459 ret = ov7670_read(sd, REG_GAIN, &gain); 1460 if (ret) 1461 return ret; 1462 *value = gain; 1463 return 0; 1464 } 1465 1466 static int ov7670_s_gain(struct v4l2_subdev *sd, int value) 1467 { 1468 int ret; 1469 unsigned char com8; 1470 1471 ret = ov7670_write(sd, REG_GAIN, value & 0xff); 1472 if (ret) 1473 return ret; 1474 /* Have to turn off AGC as well */ 1475 ret = ov7670_read(sd, REG_COM8, &com8); 1476 if (ret) 1477 return ret; 1478 return ov7670_write(sd, REG_COM8, com8 & ~COM8_AGC); 1479 } 1480 1481 /* 1482 * Tweak autogain. 1483 */ 1484 static int ov7670_s_autogain(struct v4l2_subdev *sd, int value) 1485 { 1486 int ret; 1487 unsigned char com8; 1488 1489 ret = ov7670_read(sd, REG_COM8, &com8); 1490 if (ret == 0) { 1491 if (value) 1492 com8 |= COM8_AGC; 1493 else 1494 com8 &= ~COM8_AGC; 1495 ret = ov7670_write(sd, REG_COM8, com8); 1496 } 1497 return ret; 1498 } 1499 1500 static int ov7670_s_exp(struct v4l2_subdev *sd, int value) 1501 { 1502 int ret; 1503 unsigned char com1, com8, aech, aechh; 1504 1505 ret = ov7670_read(sd, REG_COM1, &com1) + 1506 ov7670_read(sd, REG_COM8, &com8) + 1507 ov7670_read(sd, REG_AECHH, &aechh); 1508 if (ret) 1509 return ret; 1510 1511 com1 = (com1 & 0xfc) | (value & 0x03); 1512 aech = (value >> 2) & 0xff; 1513 aechh = (aechh & 0xc0) | ((value >> 10) & 0x3f); 1514 ret = ov7670_write(sd, REG_COM1, com1) + 1515 ov7670_write(sd, REG_AECH, aech) + 1516 ov7670_write(sd, REG_AECHH, aechh); 1517 /* Have to turn off AEC as well */ 1518 if (ret == 0) 1519 ret = ov7670_write(sd, REG_COM8, com8 & ~COM8_AEC); 1520 return ret; 1521 } 1522 1523 /* 1524 * Tweak autoexposure. 1525 */ 1526 static int ov7670_s_autoexp(struct v4l2_subdev *sd, 1527 enum v4l2_exposure_auto_type value) 1528 { 1529 int ret; 1530 unsigned char com8; 1531 1532 ret = ov7670_read(sd, REG_COM8, &com8); 1533 if (ret == 0) { 1534 if (value == V4L2_EXPOSURE_AUTO) 1535 com8 |= COM8_AEC; 1536 else 1537 com8 &= ~COM8_AEC; 1538 ret = ov7670_write(sd, REG_COM8, com8); 1539 } 1540 return ret; 1541 } 1542 1543 static const char * const ov7670_test_pattern_menu[] = { 1544 "No test output", 1545 "Shifting \"1\"", 1546 "8-bar color bar", 1547 "Fade to gray color bar", 1548 }; 1549 1550 static int ov7670_s_test_pattern(struct v4l2_subdev *sd, int value) 1551 { 1552 int ret; 1553 1554 ret = ov7670_update_bits(sd, REG_SCALING_XSC, TEST_PATTTERN_0, 1555 value & BIT(0) ? TEST_PATTTERN_0 : 0); 1556 if (ret) 1557 return ret; 1558 1559 return ov7670_update_bits(sd, REG_SCALING_YSC, TEST_PATTTERN_1, 1560 value & BIT(1) ? TEST_PATTTERN_1 : 0); 1561 } 1562 1563 static int ov7670_g_volatile_ctrl(struct v4l2_ctrl *ctrl) 1564 { 1565 struct v4l2_subdev *sd = to_sd(ctrl); 1566 struct ov7670_info *info = to_state(sd); 1567 1568 switch (ctrl->id) { 1569 case V4L2_CID_AUTOGAIN: 1570 return ov7670_g_gain(sd, &info->gain->val); 1571 } 1572 return -EINVAL; 1573 } 1574 1575 static int ov7670_s_ctrl(struct v4l2_ctrl *ctrl) 1576 { 1577 struct v4l2_subdev *sd = to_sd(ctrl); 1578 struct ov7670_info *info = to_state(sd); 1579 1580 switch (ctrl->id) { 1581 case V4L2_CID_BRIGHTNESS: 1582 return ov7670_s_brightness(sd, ctrl->val); 1583 case V4L2_CID_CONTRAST: 1584 return ov7670_s_contrast(sd, ctrl->val); 1585 case V4L2_CID_SATURATION: 1586 return ov7670_s_sat_hue(sd, 1587 info->saturation->val, info->hue->val); 1588 case V4L2_CID_VFLIP: 1589 return ov7670_s_vflip(sd, ctrl->val); 1590 case V4L2_CID_HFLIP: 1591 return ov7670_s_hflip(sd, ctrl->val); 1592 case V4L2_CID_AUTOGAIN: 1593 /* Only set manual gain if auto gain is not explicitly 1594 turned on. */ 1595 if (!ctrl->val) { 1596 /* ov7670_s_gain turns off auto gain */ 1597 return ov7670_s_gain(sd, info->gain->val); 1598 } 1599 return ov7670_s_autogain(sd, ctrl->val); 1600 case V4L2_CID_EXPOSURE_AUTO: 1601 /* Only set manual exposure if auto exposure is not explicitly 1602 turned on. */ 1603 if (ctrl->val == V4L2_EXPOSURE_MANUAL) { 1604 /* ov7670_s_exp turns off auto exposure */ 1605 return ov7670_s_exp(sd, info->exposure->val); 1606 } 1607 return ov7670_s_autoexp(sd, ctrl->val); 1608 case V4L2_CID_TEST_PATTERN: 1609 return ov7670_s_test_pattern(sd, ctrl->val); 1610 } 1611 return -EINVAL; 1612 } 1613 1614 static const struct v4l2_ctrl_ops ov7670_ctrl_ops = { 1615 .s_ctrl = ov7670_s_ctrl, 1616 .g_volatile_ctrl = ov7670_g_volatile_ctrl, 1617 }; 1618 1619 #ifdef CONFIG_VIDEO_ADV_DEBUG 1620 static int ov7670_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) 1621 { 1622 unsigned char val = 0; 1623 int ret; 1624 1625 ret = ov7670_read(sd, reg->reg & 0xff, &val); 1626 reg->val = val; 1627 reg->size = 1; 1628 return ret; 1629 } 1630 1631 static int ov7670_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) 1632 { 1633 ov7670_write(sd, reg->reg & 0xff, reg->val & 0xff); 1634 return 0; 1635 } 1636 #endif 1637 1638 static void ov7670_power_on(struct v4l2_subdev *sd) 1639 { 1640 struct ov7670_info *info = to_state(sd); 1641 1642 if (info->on) 1643 return; 1644 1645 clk_prepare_enable(info->clk); 1646 1647 if (info->pwdn_gpio) 1648 gpiod_set_value(info->pwdn_gpio, 0); 1649 if (info->resetb_gpio) { 1650 gpiod_set_value(info->resetb_gpio, 1); 1651 usleep_range(500, 1000); 1652 gpiod_set_value(info->resetb_gpio, 0); 1653 } 1654 if (info->pwdn_gpio || info->resetb_gpio || info->clk) 1655 usleep_range(3000, 5000); 1656 1657 info->on = true; 1658 } 1659 1660 static void ov7670_power_off(struct v4l2_subdev *sd) 1661 { 1662 struct ov7670_info *info = to_state(sd); 1663 1664 if (!info->on) 1665 return; 1666 1667 clk_disable_unprepare(info->clk); 1668 1669 if (info->pwdn_gpio) 1670 gpiod_set_value(info->pwdn_gpio, 1); 1671 1672 info->on = false; 1673 } 1674 1675 static int ov7670_s_power(struct v4l2_subdev *sd, int on) 1676 { 1677 struct ov7670_info *info = to_state(sd); 1678 1679 if (info->on == on) 1680 return 0; 1681 1682 if (on) { 1683 ov7670_power_on(sd); 1684 ov7670_init(sd, 0); 1685 ov7670_apply_fmt(sd); 1686 ov7675_apply_framerate(sd); 1687 v4l2_ctrl_handler_setup(&info->hdl); 1688 } else { 1689 ov7670_power_off(sd); 1690 } 1691 1692 return 0; 1693 } 1694 1695 static void ov7670_get_default_format(struct v4l2_subdev *sd, 1696 struct v4l2_mbus_framefmt *format) 1697 { 1698 struct ov7670_info *info = to_state(sd); 1699 1700 format->width = info->devtype->win_sizes[0].width; 1701 format->height = info->devtype->win_sizes[0].height; 1702 format->colorspace = info->fmt->colorspace; 1703 format->code = info->fmt->mbus_code; 1704 format->field = V4L2_FIELD_NONE; 1705 } 1706 1707 static int ov7670_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) 1708 { 1709 struct v4l2_mbus_framefmt *format = 1710 v4l2_subdev_get_try_format(sd, fh->state, 0); 1711 1712 ov7670_get_default_format(sd, format); 1713 1714 return 0; 1715 } 1716 1717 /* ----------------------------------------------------------------------- */ 1718 1719 static const struct v4l2_subdev_core_ops ov7670_core_ops = { 1720 .reset = ov7670_reset, 1721 .init = ov7670_init, 1722 .s_power = ov7670_s_power, 1723 .log_status = v4l2_ctrl_subdev_log_status, 1724 .subscribe_event = v4l2_ctrl_subdev_subscribe_event, 1725 .unsubscribe_event = v4l2_event_subdev_unsubscribe, 1726 #ifdef CONFIG_VIDEO_ADV_DEBUG 1727 .g_register = ov7670_g_register, 1728 .s_register = ov7670_s_register, 1729 #endif 1730 }; 1731 1732 static const struct v4l2_subdev_video_ops ov7670_video_ops = { 1733 .s_frame_interval = ov7670_s_frame_interval, 1734 .g_frame_interval = ov7670_g_frame_interval, 1735 }; 1736 1737 static const struct v4l2_subdev_pad_ops ov7670_pad_ops = { 1738 .enum_frame_interval = ov7670_enum_frame_interval, 1739 .enum_frame_size = ov7670_enum_frame_size, 1740 .enum_mbus_code = ov7670_enum_mbus_code, 1741 .get_fmt = ov7670_get_fmt, 1742 .set_fmt = ov7670_set_fmt, 1743 }; 1744 1745 static const struct v4l2_subdev_ops ov7670_ops = { 1746 .core = &ov7670_core_ops, 1747 .video = &ov7670_video_ops, 1748 .pad = &ov7670_pad_ops, 1749 }; 1750 1751 static const struct v4l2_subdev_internal_ops ov7670_subdev_internal_ops = { 1752 .open = ov7670_open, 1753 }; 1754 1755 /* ----------------------------------------------------------------------- */ 1756 1757 static int ov7670_init_gpio(struct i2c_client *client, struct ov7670_info *info) 1758 { 1759 info->pwdn_gpio = devm_gpiod_get_optional(&client->dev, "powerdown", 1760 GPIOD_OUT_LOW); 1761 if (IS_ERR(info->pwdn_gpio)) { 1762 dev_info(&client->dev, "can't get %s GPIO\n", "powerdown"); 1763 return PTR_ERR(info->pwdn_gpio); 1764 } 1765 1766 info->resetb_gpio = devm_gpiod_get_optional(&client->dev, "reset", 1767 GPIOD_OUT_LOW); 1768 if (IS_ERR(info->resetb_gpio)) { 1769 dev_info(&client->dev, "can't get %s GPIO\n", "reset"); 1770 return PTR_ERR(info->resetb_gpio); 1771 } 1772 1773 usleep_range(3000, 5000); 1774 1775 return 0; 1776 } 1777 1778 /* 1779 * ov7670_parse_dt() - Parse device tree to collect mbus configuration 1780 * properties 1781 */ 1782 static int ov7670_parse_dt(struct device *dev, 1783 struct ov7670_info *info) 1784 { 1785 struct fwnode_handle *fwnode = dev_fwnode(dev); 1786 struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = 0 }; 1787 struct fwnode_handle *ep; 1788 int ret; 1789 1790 if (!fwnode) 1791 return -EINVAL; 1792 1793 info->pclk_hb_disable = false; 1794 if (fwnode_property_present(fwnode, "ov7670,pclk-hb-disable")) 1795 info->pclk_hb_disable = true; 1796 1797 ep = fwnode_graph_get_next_endpoint(fwnode, NULL); 1798 if (!ep) 1799 return -EINVAL; 1800 1801 ret = v4l2_fwnode_endpoint_parse(ep, &bus_cfg); 1802 fwnode_handle_put(ep); 1803 if (ret) 1804 return ret; 1805 1806 if (bus_cfg.bus_type != V4L2_MBUS_PARALLEL) { 1807 dev_err(dev, "Unsupported media bus type\n"); 1808 return -EINVAL; 1809 } 1810 info->mbus_config = bus_cfg.bus.parallel.flags; 1811 1812 return 0; 1813 } 1814 1815 static int ov7670_probe(struct i2c_client *client) 1816 { 1817 struct v4l2_fract tpf; 1818 struct v4l2_subdev *sd; 1819 struct ov7670_info *info; 1820 int ret; 1821 1822 info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL); 1823 if (info == NULL) 1824 return -ENOMEM; 1825 sd = &info->sd; 1826 v4l2_i2c_subdev_init(sd, client, &ov7670_ops); 1827 1828 sd->internal_ops = &ov7670_subdev_internal_ops; 1829 sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS; 1830 1831 info->clock_speed = 30; /* default: a guess */ 1832 1833 if (dev_fwnode(&client->dev)) { 1834 ret = ov7670_parse_dt(&client->dev, info); 1835 if (ret) 1836 return ret; 1837 1838 } else if (client->dev.platform_data) { 1839 struct ov7670_config *config = client->dev.platform_data; 1840 1841 /* 1842 * Must apply configuration before initializing device, because it 1843 * selects I/O method. 1844 */ 1845 info->min_width = config->min_width; 1846 info->min_height = config->min_height; 1847 info->use_smbus = config->use_smbus; 1848 1849 if (config->clock_speed) 1850 info->clock_speed = config->clock_speed; 1851 1852 if (config->pll_bypass) 1853 info->pll_bypass = true; 1854 1855 if (config->pclk_hb_disable) 1856 info->pclk_hb_disable = true; 1857 } 1858 1859 info->clk = devm_clk_get_optional(&client->dev, "xclk"); 1860 if (IS_ERR(info->clk)) 1861 return PTR_ERR(info->clk); 1862 1863 ret = ov7670_init_gpio(client, info); 1864 if (ret) 1865 return ret; 1866 1867 ov7670_power_on(sd); 1868 1869 if (info->clk) { 1870 info->clock_speed = clk_get_rate(info->clk) / 1000000; 1871 if (info->clock_speed < 10 || info->clock_speed > 48) { 1872 ret = -EINVAL; 1873 goto power_off; 1874 } 1875 } 1876 1877 /* Make sure it's an ov7670 */ 1878 ret = ov7670_detect(sd); 1879 if (ret) { 1880 v4l_dbg(1, debug, client, 1881 "chip found @ 0x%x (%s) is not an ov7670 chip.\n", 1882 client->addr << 1, client->adapter->name); 1883 goto power_off; 1884 } 1885 v4l_info(client, "chip found @ 0x%02x (%s)\n", 1886 client->addr << 1, client->adapter->name); 1887 1888 info->devtype = i2c_get_match_data(client); 1889 info->fmt = &ov7670_formats[0]; 1890 info->wsize = &info->devtype->win_sizes[0]; 1891 1892 ov7670_get_default_format(sd, &info->format); 1893 1894 info->clkrc = 0; 1895 1896 /* Set default frame rate to 30 fps */ 1897 tpf.numerator = 1; 1898 tpf.denominator = 30; 1899 info->devtype->set_framerate(sd, &tpf); 1900 1901 v4l2_ctrl_handler_init(&info->hdl, 10); 1902 v4l2_ctrl_new_std(&info->hdl, &ov7670_ctrl_ops, 1903 V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); 1904 v4l2_ctrl_new_std(&info->hdl, &ov7670_ctrl_ops, 1905 V4L2_CID_CONTRAST, 0, 127, 1, 64); 1906 v4l2_ctrl_new_std(&info->hdl, &ov7670_ctrl_ops, 1907 V4L2_CID_VFLIP, 0, 1, 1, 0); 1908 v4l2_ctrl_new_std(&info->hdl, &ov7670_ctrl_ops, 1909 V4L2_CID_HFLIP, 0, 1, 1, 0); 1910 info->saturation = v4l2_ctrl_new_std(&info->hdl, &ov7670_ctrl_ops, 1911 V4L2_CID_SATURATION, 0, 256, 1, 128); 1912 info->hue = v4l2_ctrl_new_std(&info->hdl, &ov7670_ctrl_ops, 1913 V4L2_CID_HUE, -180, 180, 5, 0); 1914 info->gain = v4l2_ctrl_new_std(&info->hdl, &ov7670_ctrl_ops, 1915 V4L2_CID_GAIN, 0, 255, 1, 128); 1916 info->auto_gain = v4l2_ctrl_new_std(&info->hdl, &ov7670_ctrl_ops, 1917 V4L2_CID_AUTOGAIN, 0, 1, 1, 1); 1918 info->exposure = v4l2_ctrl_new_std(&info->hdl, &ov7670_ctrl_ops, 1919 V4L2_CID_EXPOSURE, 0, 65535, 1, 500); 1920 info->auto_exposure = v4l2_ctrl_new_std_menu(&info->hdl, &ov7670_ctrl_ops, 1921 V4L2_CID_EXPOSURE_AUTO, V4L2_EXPOSURE_MANUAL, 0, 1922 V4L2_EXPOSURE_AUTO); 1923 v4l2_ctrl_new_std_menu_items(&info->hdl, &ov7670_ctrl_ops, 1924 V4L2_CID_TEST_PATTERN, 1925 ARRAY_SIZE(ov7670_test_pattern_menu) - 1, 0, 0, 1926 ov7670_test_pattern_menu); 1927 sd->ctrl_handler = &info->hdl; 1928 if (info->hdl.error) { 1929 ret = info->hdl.error; 1930 1931 goto hdl_free; 1932 } 1933 /* 1934 * We have checked empirically that hw allows to read back the gain 1935 * value chosen by auto gain but that's not the case for auto exposure. 1936 */ 1937 v4l2_ctrl_auto_cluster(2, &info->auto_gain, 0, true); 1938 v4l2_ctrl_auto_cluster(2, &info->auto_exposure, 1939 V4L2_EXPOSURE_MANUAL, false); 1940 v4l2_ctrl_cluster(2, &info->saturation); 1941 1942 info->pad.flags = MEDIA_PAD_FL_SOURCE; 1943 info->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; 1944 ret = media_entity_pads_init(&info->sd.entity, 1, &info->pad); 1945 if (ret < 0) 1946 goto hdl_free; 1947 1948 v4l2_ctrl_handler_setup(&info->hdl); 1949 1950 ret = v4l2_async_register_subdev(&info->sd); 1951 if (ret < 0) 1952 goto entity_cleanup; 1953 1954 ov7670_power_off(sd); 1955 return 0; 1956 1957 entity_cleanup: 1958 media_entity_cleanup(&info->sd.entity); 1959 hdl_free: 1960 v4l2_ctrl_handler_free(&info->hdl); 1961 power_off: 1962 ov7670_power_off(sd); 1963 return ret; 1964 } 1965 1966 static void ov7670_remove(struct i2c_client *client) 1967 { 1968 struct v4l2_subdev *sd = i2c_get_clientdata(client); 1969 struct ov7670_info *info = to_state(sd); 1970 1971 v4l2_async_unregister_subdev(sd); 1972 v4l2_ctrl_handler_free(&info->hdl); 1973 media_entity_cleanup(&info->sd.entity); 1974 } 1975 1976 static const struct ov7670_devtype ov7670_devdata = { 1977 .win_sizes = ov7670_win_sizes, 1978 .n_win_sizes = ARRAY_SIZE(ov7670_win_sizes), 1979 .set_framerate = ov7670_set_framerate_legacy, 1980 .get_framerate = ov7670_get_framerate_legacy, 1981 }; 1982 1983 static const struct ov7670_devtype ov7675_devdata = { 1984 .win_sizes = ov7675_win_sizes, 1985 .n_win_sizes = ARRAY_SIZE(ov7675_win_sizes), 1986 .set_framerate = ov7675_set_framerate, 1987 .get_framerate = ov7675_get_framerate, 1988 }; 1989 1990 static const struct i2c_device_id ov7670_id[] = { 1991 { "ov7670", (kernel_ulong_t)&ov7670_devdata }, 1992 { "ov7675", (kernel_ulong_t)&ov7675_devdata }, 1993 { /* sentinel */ } 1994 }; 1995 MODULE_DEVICE_TABLE(i2c, ov7670_id); 1996 1997 static const struct of_device_id ov7670_of_match[] = { 1998 { .compatible = "ovti,ov7670", &ov7670_devdata }, 1999 { /* sentinel */ } 2000 }; 2001 MODULE_DEVICE_TABLE(of, ov7670_of_match); 2002 2003 static struct i2c_driver ov7670_driver = { 2004 .driver = { 2005 .name = "ov7670", 2006 .of_match_table = ov7670_of_match, 2007 }, 2008 .probe = ov7670_probe, 2009 .remove = ov7670_remove, 2010 .id_table = ov7670_id, 2011 }; 2012 2013 module_i2c_driver(ov7670_driver); 2014