1 // SPDX-License-Identifier: GPL-2.0 2 // 3 // mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor 4 // 5 // Copyright (c) 2009 Mauro Carvalho Chehab <mchehab@kernel.org> 6 7 #include <linux/i2c.h> 8 #include <linux/slab.h> 9 #include <linux/videodev2.h> 10 #include <linux/delay.h> 11 #include <linux/module.h> 12 #include <asm/div64.h> 13 #include <media/v4l2-device.h> 14 #include <media/v4l2-ctrls.h> 15 #include <media/i2c/mt9v011.h> 16 17 MODULE_DESCRIPTION("Micron mt9v011 sensor driver"); 18 MODULE_AUTHOR("Mauro Carvalho Chehab"); 19 MODULE_LICENSE("GPL v2"); 20 21 static int debug; 22 module_param(debug, int, 0); 23 MODULE_PARM_DESC(debug, "Debug level (0-2)"); 24 25 #define R00_MT9V011_CHIP_VERSION 0x00 26 #define R01_MT9V011_ROWSTART 0x01 27 #define R02_MT9V011_COLSTART 0x02 28 #define R03_MT9V011_HEIGHT 0x03 29 #define R04_MT9V011_WIDTH 0x04 30 #define R05_MT9V011_HBLANK 0x05 31 #define R06_MT9V011_VBLANK 0x06 32 #define R07_MT9V011_OUT_CTRL 0x07 33 #define R09_MT9V011_SHUTTER_WIDTH 0x09 34 #define R0A_MT9V011_CLK_SPEED 0x0a 35 #define R0B_MT9V011_RESTART 0x0b 36 #define R0C_MT9V011_SHUTTER_DELAY 0x0c 37 #define R0D_MT9V011_RESET 0x0d 38 #define R1E_MT9V011_DIGITAL_ZOOM 0x1e 39 #define R20_MT9V011_READ_MODE 0x20 40 #define R2B_MT9V011_GREEN_1_GAIN 0x2b 41 #define R2C_MT9V011_BLUE_GAIN 0x2c 42 #define R2D_MT9V011_RED_GAIN 0x2d 43 #define R2E_MT9V011_GREEN_2_GAIN 0x2e 44 #define R35_MT9V011_GLOBAL_GAIN 0x35 45 #define RF1_MT9V011_CHIP_ENABLE 0xf1 46 47 #define MT9V011_VERSION 0x8232 48 #define MT9V011_REV_B_VERSION 0x8243 49 50 struct mt9v011 { 51 struct v4l2_subdev sd; 52 #ifdef CONFIG_MEDIA_CONTROLLER 53 struct media_pad pad; 54 #endif 55 struct v4l2_ctrl_handler ctrls; 56 unsigned width, height; 57 unsigned xtal; 58 unsigned hflip:1; 59 unsigned vflip:1; 60 61 u16 global_gain, exposure; 62 s16 red_bal, blue_bal; 63 }; 64 65 static inline struct mt9v011 *to_mt9v011(struct v4l2_subdev *sd) 66 { 67 return container_of(sd, struct mt9v011, sd); 68 } 69 70 static int mt9v011_read(struct v4l2_subdev *sd, unsigned char addr) 71 { 72 struct i2c_client *c = v4l2_get_subdevdata(sd); 73 __be16 buffer; 74 int rc, val; 75 76 rc = i2c_master_send(c, &addr, 1); 77 if (rc != 1) 78 v4l2_dbg(0, debug, sd, 79 "i2c i/o error: rc == %d (should be 1)\n", rc); 80 81 msleep(10); 82 83 rc = i2c_master_recv(c, (char *)&buffer, 2); 84 if (rc != 2) 85 v4l2_dbg(0, debug, sd, 86 "i2c i/o error: rc == %d (should be 2)\n", rc); 87 88 val = be16_to_cpu(buffer); 89 90 v4l2_dbg(2, debug, sd, "mt9v011: read 0x%02x = 0x%04x\n", addr, val); 91 92 return val; 93 } 94 95 static void mt9v011_write(struct v4l2_subdev *sd, unsigned char addr, 96 u16 value) 97 { 98 struct i2c_client *c = v4l2_get_subdevdata(sd); 99 unsigned char buffer[3]; 100 int rc; 101 102 buffer[0] = addr; 103 buffer[1] = value >> 8; 104 buffer[2] = value & 0xff; 105 106 v4l2_dbg(2, debug, sd, 107 "mt9v011: writing 0x%02x 0x%04x\n", buffer[0], value); 108 rc = i2c_master_send(c, buffer, 3); 109 if (rc != 3) 110 v4l2_dbg(0, debug, sd, 111 "i2c i/o error: rc == %d (should be 3)\n", rc); 112 } 113 114 115 struct i2c_reg_value { 116 unsigned char reg; 117 u16 value; 118 }; 119 120 /* 121 * Values used at the original driver 122 * Some values are marked as Reserved at the datasheet 123 */ 124 static const struct i2c_reg_value mt9v011_init_default[] = { 125 { R0D_MT9V011_RESET, 0x0001 }, 126 { R0D_MT9V011_RESET, 0x0000 }, 127 128 { R0C_MT9V011_SHUTTER_DELAY, 0x0000 }, 129 { R09_MT9V011_SHUTTER_WIDTH, 0x1fc }, 130 131 { R0A_MT9V011_CLK_SPEED, 0x0000 }, 132 { R1E_MT9V011_DIGITAL_ZOOM, 0x0000 }, 133 134 { R07_MT9V011_OUT_CTRL, 0x0002 }, /* chip enable */ 135 }; 136 137 138 static u16 calc_mt9v011_gain(s16 lineargain) 139 { 140 141 u16 digitalgain = 0; 142 u16 analogmult = 0; 143 u16 analoginit = 0; 144 145 if (lineargain < 0) 146 lineargain = 0; 147 148 /* recommended minimum */ 149 lineargain += 0x0020; 150 151 if (lineargain > 2047) 152 lineargain = 2047; 153 154 if (lineargain > 1023) { 155 digitalgain = 3; 156 analogmult = 3; 157 analoginit = lineargain / 16; 158 } else if (lineargain > 511) { 159 digitalgain = 1; 160 analogmult = 3; 161 analoginit = lineargain / 8; 162 } else if (lineargain > 255) { 163 analogmult = 3; 164 analoginit = lineargain / 4; 165 } else if (lineargain > 127) { 166 analogmult = 1; 167 analoginit = lineargain / 2; 168 } else 169 analoginit = lineargain; 170 171 return analoginit + (analogmult << 7) + (digitalgain << 9); 172 173 } 174 175 static void set_balance(struct v4l2_subdev *sd) 176 { 177 struct mt9v011 *core = to_mt9v011(sd); 178 u16 green_gain, blue_gain, red_gain; 179 u16 exposure; 180 s16 bal; 181 182 exposure = core->exposure; 183 184 green_gain = calc_mt9v011_gain(core->global_gain); 185 186 bal = core->global_gain; 187 bal += (core->blue_bal * core->global_gain / (1 << 7)); 188 blue_gain = calc_mt9v011_gain(bal); 189 190 bal = core->global_gain; 191 bal += (core->red_bal * core->global_gain / (1 << 7)); 192 red_gain = calc_mt9v011_gain(bal); 193 194 mt9v011_write(sd, R2B_MT9V011_GREEN_1_GAIN, green_gain); 195 mt9v011_write(sd, R2E_MT9V011_GREEN_2_GAIN, green_gain); 196 mt9v011_write(sd, R2C_MT9V011_BLUE_GAIN, blue_gain); 197 mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain); 198 mt9v011_write(sd, R09_MT9V011_SHUTTER_WIDTH, exposure); 199 } 200 201 static void calc_fps(struct v4l2_subdev *sd, u32 *numerator, u32 *denominator) 202 { 203 struct mt9v011 *core = to_mt9v011(sd); 204 unsigned height, width, hblank, vblank, speed; 205 unsigned row_time, t_time; 206 u64 frames_per_ms; 207 unsigned tmp; 208 209 height = mt9v011_read(sd, R03_MT9V011_HEIGHT); 210 width = mt9v011_read(sd, R04_MT9V011_WIDTH); 211 hblank = mt9v011_read(sd, R05_MT9V011_HBLANK); 212 vblank = mt9v011_read(sd, R06_MT9V011_VBLANK); 213 speed = mt9v011_read(sd, R0A_MT9V011_CLK_SPEED); 214 215 row_time = (width + 113 + hblank) * (speed + 2); 216 t_time = row_time * (height + vblank + 1); 217 218 frames_per_ms = core->xtal * 1000l; 219 do_div(frames_per_ms, t_time); 220 tmp = frames_per_ms; 221 222 v4l2_dbg(1, debug, sd, "Programmed to %u.%03u fps (%d pixel clcks)\n", 223 tmp / 1000, tmp % 1000, t_time); 224 225 if (numerator && denominator) { 226 *numerator = 1000; 227 *denominator = (u32)frames_per_ms; 228 } 229 } 230 231 static u16 calc_speed(struct v4l2_subdev *sd, u32 numerator, u32 denominator) 232 { 233 struct mt9v011 *core = to_mt9v011(sd); 234 unsigned height, width, hblank, vblank; 235 unsigned row_time, line_time; 236 u64 t_time, speed; 237 238 /* Avoid bogus calculus */ 239 if (!numerator || !denominator) 240 return 0; 241 242 height = mt9v011_read(sd, R03_MT9V011_HEIGHT); 243 width = mt9v011_read(sd, R04_MT9V011_WIDTH); 244 hblank = mt9v011_read(sd, R05_MT9V011_HBLANK); 245 vblank = mt9v011_read(sd, R06_MT9V011_VBLANK); 246 247 row_time = width + 113 + hblank; 248 line_time = height + vblank + 1; 249 250 t_time = core->xtal * ((u64)numerator); 251 /* round to the closest value */ 252 t_time += denominator / 2; 253 do_div(t_time, denominator); 254 255 speed = t_time; 256 do_div(speed, row_time * line_time); 257 258 /* Avoid having a negative value for speed */ 259 if (speed < 2) 260 speed = 0; 261 else 262 speed -= 2; 263 264 /* Avoid speed overflow */ 265 if (speed > 15) 266 return 15; 267 268 return (u16)speed; 269 } 270 271 static void set_res(struct v4l2_subdev *sd) 272 { 273 struct mt9v011 *core = to_mt9v011(sd); 274 unsigned vstart, hstart; 275 276 /* 277 * The mt9v011 doesn't have scaling. So, in order to select the desired 278 * resolution, we're cropping at the middle of the sensor. 279 * hblank and vblank should be adjusted, in order to warrant that 280 * we'll preserve the line timings for 30 fps, no matter what resolution 281 * is selected. 282 * NOTE: datasheet says that width (and height) should be filled with 283 * width-1. However, this doesn't work, since one pixel per line will 284 * be missing. 285 */ 286 287 hstart = 20 + (640 - core->width) / 2; 288 mt9v011_write(sd, R02_MT9V011_COLSTART, hstart); 289 mt9v011_write(sd, R04_MT9V011_WIDTH, core->width); 290 mt9v011_write(sd, R05_MT9V011_HBLANK, 771 - core->width); 291 292 vstart = 8 + (480 - core->height) / 2; 293 mt9v011_write(sd, R01_MT9V011_ROWSTART, vstart); 294 mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height); 295 mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height); 296 297 calc_fps(sd, NULL, NULL); 298 }; 299 300 static void set_read_mode(struct v4l2_subdev *sd) 301 { 302 struct mt9v011 *core = to_mt9v011(sd); 303 unsigned mode = 0x1000; 304 305 if (core->hflip) 306 mode |= 0x4000; 307 308 if (core->vflip) 309 mode |= 0x8000; 310 311 mt9v011_write(sd, R20_MT9V011_READ_MODE, mode); 312 } 313 314 static int mt9v011_reset(struct v4l2_subdev *sd, u32 val) 315 { 316 int i; 317 318 for (i = 0; i < ARRAY_SIZE(mt9v011_init_default); i++) 319 mt9v011_write(sd, mt9v011_init_default[i].reg, 320 mt9v011_init_default[i].value); 321 322 set_balance(sd); 323 set_res(sd); 324 set_read_mode(sd); 325 326 return 0; 327 } 328 329 static int mt9v011_enum_mbus_code(struct v4l2_subdev *sd, 330 struct v4l2_subdev_pad_config *cfg, 331 struct v4l2_subdev_mbus_code_enum *code) 332 { 333 if (code->pad || code->index > 0) 334 return -EINVAL; 335 336 code->code = MEDIA_BUS_FMT_SGRBG8_1X8; 337 return 0; 338 } 339 340 static int mt9v011_set_fmt(struct v4l2_subdev *sd, 341 struct v4l2_subdev_pad_config *cfg, 342 struct v4l2_subdev_format *format) 343 { 344 struct v4l2_mbus_framefmt *fmt = &format->format; 345 struct mt9v011 *core = to_mt9v011(sd); 346 347 if (format->pad || fmt->code != MEDIA_BUS_FMT_SGRBG8_1X8) 348 return -EINVAL; 349 350 v4l_bound_align_image(&fmt->width, 48, 639, 1, 351 &fmt->height, 32, 480, 1, 0); 352 fmt->field = V4L2_FIELD_NONE; 353 fmt->colorspace = V4L2_COLORSPACE_SRGB; 354 355 if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) { 356 core->width = fmt->width; 357 core->height = fmt->height; 358 359 set_res(sd); 360 } else { 361 cfg->try_fmt = *fmt; 362 } 363 364 return 0; 365 } 366 367 static int mt9v011_g_frame_interval(struct v4l2_subdev *sd, 368 struct v4l2_subdev_frame_interval *ival) 369 { 370 calc_fps(sd, 371 &ival->interval.numerator, 372 &ival->interval.denominator); 373 374 return 0; 375 } 376 377 static int mt9v011_s_frame_interval(struct v4l2_subdev *sd, 378 struct v4l2_subdev_frame_interval *ival) 379 { 380 struct v4l2_fract *tpf = &ival->interval; 381 u16 speed; 382 383 speed = calc_speed(sd, tpf->numerator, tpf->denominator); 384 385 mt9v011_write(sd, R0A_MT9V011_CLK_SPEED, speed); 386 v4l2_dbg(1, debug, sd, "Setting speed to %d\n", speed); 387 388 /* Recalculate and update fps info */ 389 calc_fps(sd, &tpf->numerator, &tpf->denominator); 390 391 return 0; 392 } 393 394 #ifdef CONFIG_VIDEO_ADV_DEBUG 395 static int mt9v011_g_register(struct v4l2_subdev *sd, 396 struct v4l2_dbg_register *reg) 397 { 398 reg->val = mt9v011_read(sd, reg->reg & 0xff); 399 reg->size = 2; 400 401 return 0; 402 } 403 404 static int mt9v011_s_register(struct v4l2_subdev *sd, 405 const struct v4l2_dbg_register *reg) 406 { 407 mt9v011_write(sd, reg->reg & 0xff, reg->val & 0xffff); 408 409 return 0; 410 } 411 #endif 412 413 static int mt9v011_s_ctrl(struct v4l2_ctrl *ctrl) 414 { 415 struct mt9v011 *core = 416 container_of(ctrl->handler, struct mt9v011, ctrls); 417 struct v4l2_subdev *sd = &core->sd; 418 419 switch (ctrl->id) { 420 case V4L2_CID_GAIN: 421 core->global_gain = ctrl->val; 422 break; 423 case V4L2_CID_EXPOSURE: 424 core->exposure = ctrl->val; 425 break; 426 case V4L2_CID_RED_BALANCE: 427 core->red_bal = ctrl->val; 428 break; 429 case V4L2_CID_BLUE_BALANCE: 430 core->blue_bal = ctrl->val; 431 break; 432 case V4L2_CID_HFLIP: 433 core->hflip = ctrl->val; 434 set_read_mode(sd); 435 return 0; 436 case V4L2_CID_VFLIP: 437 core->vflip = ctrl->val; 438 set_read_mode(sd); 439 return 0; 440 default: 441 return -EINVAL; 442 } 443 444 set_balance(sd); 445 return 0; 446 } 447 448 static const struct v4l2_ctrl_ops mt9v011_ctrl_ops = { 449 .s_ctrl = mt9v011_s_ctrl, 450 }; 451 452 static const struct v4l2_subdev_core_ops mt9v011_core_ops = { 453 .reset = mt9v011_reset, 454 #ifdef CONFIG_VIDEO_ADV_DEBUG 455 .g_register = mt9v011_g_register, 456 .s_register = mt9v011_s_register, 457 #endif 458 }; 459 460 static const struct v4l2_subdev_video_ops mt9v011_video_ops = { 461 .g_frame_interval = mt9v011_g_frame_interval, 462 .s_frame_interval = mt9v011_s_frame_interval, 463 }; 464 465 static const struct v4l2_subdev_pad_ops mt9v011_pad_ops = { 466 .enum_mbus_code = mt9v011_enum_mbus_code, 467 .set_fmt = mt9v011_set_fmt, 468 }; 469 470 static const struct v4l2_subdev_ops mt9v011_ops = { 471 .core = &mt9v011_core_ops, 472 .video = &mt9v011_video_ops, 473 .pad = &mt9v011_pad_ops, 474 }; 475 476 477 /**************************************************************************** 478 I2C Client & Driver 479 ****************************************************************************/ 480 481 static int mt9v011_probe(struct i2c_client *c, 482 const struct i2c_device_id *id) 483 { 484 u16 version; 485 struct mt9v011 *core; 486 struct v4l2_subdev *sd; 487 #ifdef CONFIG_MEDIA_CONTROLLER 488 int ret; 489 #endif 490 491 /* Check if the adapter supports the needed features */ 492 if (!i2c_check_functionality(c->adapter, 493 I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) 494 return -EIO; 495 496 core = devm_kzalloc(&c->dev, sizeof(struct mt9v011), GFP_KERNEL); 497 if (!core) 498 return -ENOMEM; 499 500 sd = &core->sd; 501 v4l2_i2c_subdev_init(sd, c, &mt9v011_ops); 502 503 #ifdef CONFIG_MEDIA_CONTROLLER 504 core->pad.flags = MEDIA_PAD_FL_SOURCE; 505 sd->entity.function = MEDIA_ENT_F_CAM_SENSOR; 506 507 ret = media_entity_pads_init(&sd->entity, 1, &core->pad); 508 if (ret < 0) 509 return ret; 510 #endif 511 512 /* Check if the sensor is really a MT9V011 */ 513 version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION); 514 if ((version != MT9V011_VERSION) && 515 (version != MT9V011_REV_B_VERSION)) { 516 v4l2_info(sd, "*** unknown micron chip detected (0x%04x).\n", 517 version); 518 return -EINVAL; 519 } 520 521 v4l2_ctrl_handler_init(&core->ctrls, 5); 522 v4l2_ctrl_new_std(&core->ctrls, &mt9v011_ctrl_ops, 523 V4L2_CID_GAIN, 0, (1 << 12) - 1 - 0x20, 1, 0x20); 524 v4l2_ctrl_new_std(&core->ctrls, &mt9v011_ctrl_ops, 525 V4L2_CID_EXPOSURE, 0, 2047, 1, 0x01fc); 526 v4l2_ctrl_new_std(&core->ctrls, &mt9v011_ctrl_ops, 527 V4L2_CID_RED_BALANCE, -(1 << 9), (1 << 9) - 1, 1, 0); 528 v4l2_ctrl_new_std(&core->ctrls, &mt9v011_ctrl_ops, 529 V4L2_CID_BLUE_BALANCE, -(1 << 9), (1 << 9) - 1, 1, 0); 530 v4l2_ctrl_new_std(&core->ctrls, &mt9v011_ctrl_ops, 531 V4L2_CID_HFLIP, 0, 1, 1, 0); 532 v4l2_ctrl_new_std(&core->ctrls, &mt9v011_ctrl_ops, 533 V4L2_CID_VFLIP, 0, 1, 1, 0); 534 535 if (core->ctrls.error) { 536 int ret = core->ctrls.error; 537 538 v4l2_err(sd, "control initialization error %d\n", ret); 539 v4l2_ctrl_handler_free(&core->ctrls); 540 return ret; 541 } 542 core->sd.ctrl_handler = &core->ctrls; 543 544 core->global_gain = 0x0024; 545 core->exposure = 0x01fc; 546 core->width = 640; 547 core->height = 480; 548 core->xtal = 27000000; /* Hz */ 549 550 if (c->dev.platform_data) { 551 struct mt9v011_platform_data *pdata = c->dev.platform_data; 552 553 core->xtal = pdata->xtal; 554 v4l2_dbg(1, debug, sd, "xtal set to %d.%03d MHz\n", 555 core->xtal / 1000000, (core->xtal / 1000) % 1000); 556 } 557 558 v4l_info(c, "chip found @ 0x%02x (%s - chip version 0x%04x)\n", 559 c->addr << 1, c->adapter->name, version); 560 561 return 0; 562 } 563 564 static int mt9v011_remove(struct i2c_client *c) 565 { 566 struct v4l2_subdev *sd = i2c_get_clientdata(c); 567 struct mt9v011 *core = to_mt9v011(sd); 568 569 v4l2_dbg(1, debug, sd, 570 "mt9v011.c: removing mt9v011 adapter on address 0x%x\n", 571 c->addr << 1); 572 573 v4l2_device_unregister_subdev(sd); 574 v4l2_ctrl_handler_free(&core->ctrls); 575 576 return 0; 577 } 578 579 /* ----------------------------------------------------------------------- */ 580 581 static const struct i2c_device_id mt9v011_id[] = { 582 { "mt9v011", 0 }, 583 { } 584 }; 585 MODULE_DEVICE_TABLE(i2c, mt9v011_id); 586 587 static struct i2c_driver mt9v011_driver = { 588 .driver = { 589 .name = "mt9v011", 590 }, 591 .probe = mt9v011_probe, 592 .remove = mt9v011_remove, 593 .id_table = mt9v011_id, 594 }; 595 596 module_i2c_driver(mt9v011_driver); 597