xref: /linux/drivers/media/i2c/mt9v011.c (revision 24bce201d79807b668bf9d9e0aca801c5c0d5f78)
1 // SPDX-License-Identifier: GPL-2.0
2 //
3 // mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor
4 //
5 // Copyright (c) 2009 Mauro Carvalho Chehab <mchehab@kernel.org>
6 
7 #include <linux/i2c.h>
8 #include <linux/slab.h>
9 #include <linux/videodev2.h>
10 #include <linux/delay.h>
11 #include <linux/module.h>
12 #include <asm/div64.h>
13 #include <media/v4l2-device.h>
14 #include <media/v4l2-ctrls.h>
15 #include <media/i2c/mt9v011.h>
16 
17 MODULE_DESCRIPTION("Micron mt9v011 sensor driver");
18 MODULE_AUTHOR("Mauro Carvalho Chehab");
19 MODULE_LICENSE("GPL v2");
20 
21 static int debug;
22 module_param(debug, int, 0);
23 MODULE_PARM_DESC(debug, "Debug level (0-2)");
24 
25 #define R00_MT9V011_CHIP_VERSION	0x00
26 #define R01_MT9V011_ROWSTART		0x01
27 #define R02_MT9V011_COLSTART		0x02
28 #define R03_MT9V011_HEIGHT		0x03
29 #define R04_MT9V011_WIDTH		0x04
30 #define R05_MT9V011_HBLANK		0x05
31 #define R06_MT9V011_VBLANK		0x06
32 #define R07_MT9V011_OUT_CTRL		0x07
33 #define R09_MT9V011_SHUTTER_WIDTH	0x09
34 #define R0A_MT9V011_CLK_SPEED		0x0a
35 #define R0B_MT9V011_RESTART		0x0b
36 #define R0C_MT9V011_SHUTTER_DELAY	0x0c
37 #define R0D_MT9V011_RESET		0x0d
38 #define R1E_MT9V011_DIGITAL_ZOOM	0x1e
39 #define R20_MT9V011_READ_MODE		0x20
40 #define R2B_MT9V011_GREEN_1_GAIN	0x2b
41 #define R2C_MT9V011_BLUE_GAIN		0x2c
42 #define R2D_MT9V011_RED_GAIN		0x2d
43 #define R2E_MT9V011_GREEN_2_GAIN	0x2e
44 #define R35_MT9V011_GLOBAL_GAIN		0x35
45 #define RF1_MT9V011_CHIP_ENABLE		0xf1
46 
47 #define MT9V011_VERSION			0x8232
48 #define MT9V011_REV_B_VERSION		0x8243
49 
50 struct mt9v011 {
51 	struct v4l2_subdev sd;
52 #ifdef CONFIG_MEDIA_CONTROLLER
53 	struct media_pad pad;
54 #endif
55 	struct v4l2_ctrl_handler ctrls;
56 	unsigned width, height;
57 	unsigned xtal;
58 	unsigned hflip:1;
59 	unsigned vflip:1;
60 
61 	u16 global_gain, exposure;
62 	s16 red_bal, blue_bal;
63 };
64 
65 static inline struct mt9v011 *to_mt9v011(struct v4l2_subdev *sd)
66 {
67 	return container_of(sd, struct mt9v011, sd);
68 }
69 
70 static int mt9v011_read(struct v4l2_subdev *sd, unsigned char addr)
71 {
72 	struct i2c_client *c = v4l2_get_subdevdata(sd);
73 	__be16 buffer;
74 	int rc, val;
75 
76 	rc = i2c_master_send(c, &addr, 1);
77 	if (rc != 1)
78 		v4l2_dbg(0, debug, sd,
79 			 "i2c i/o error: rc == %d (should be 1)\n", rc);
80 
81 	msleep(10);
82 
83 	rc = i2c_master_recv(c, (char *)&buffer, 2);
84 	if (rc != 2)
85 		v4l2_dbg(0, debug, sd,
86 			 "i2c i/o error: rc == %d (should be 2)\n", rc);
87 
88 	val = be16_to_cpu(buffer);
89 
90 	v4l2_dbg(2, debug, sd, "mt9v011: read 0x%02x = 0x%04x\n", addr, val);
91 
92 	return val;
93 }
94 
95 static void mt9v011_write(struct v4l2_subdev *sd, unsigned char addr,
96 				 u16 value)
97 {
98 	struct i2c_client *c = v4l2_get_subdevdata(sd);
99 	unsigned char buffer[3];
100 	int rc;
101 
102 	buffer[0] = addr;
103 	buffer[1] = value >> 8;
104 	buffer[2] = value & 0xff;
105 
106 	v4l2_dbg(2, debug, sd,
107 		 "mt9v011: writing 0x%02x 0x%04x\n", buffer[0], value);
108 	rc = i2c_master_send(c, buffer, 3);
109 	if (rc != 3)
110 		v4l2_dbg(0, debug, sd,
111 			 "i2c i/o error: rc == %d (should be 3)\n", rc);
112 }
113 
114 
115 struct i2c_reg_value {
116 	unsigned char reg;
117 	u16           value;
118 };
119 
120 /*
121  * Values used at the original driver
122  * Some values are marked as Reserved at the datasheet
123  */
124 static const struct i2c_reg_value mt9v011_init_default[] = {
125 		{ R0D_MT9V011_RESET, 0x0001 },
126 		{ R0D_MT9V011_RESET, 0x0000 },
127 
128 		{ R0C_MT9V011_SHUTTER_DELAY, 0x0000 },
129 		{ R09_MT9V011_SHUTTER_WIDTH, 0x1fc },
130 
131 		{ R0A_MT9V011_CLK_SPEED, 0x0000 },
132 		{ R1E_MT9V011_DIGITAL_ZOOM,  0x0000 },
133 
134 		{ R07_MT9V011_OUT_CTRL, 0x0002 },	/* chip enable */
135 };
136 
137 
138 static u16 calc_mt9v011_gain(s16 lineargain)
139 {
140 
141 	u16 digitalgain = 0;
142 	u16 analogmult = 0;
143 	u16 analoginit = 0;
144 
145 	if (lineargain < 0)
146 		lineargain = 0;
147 
148 	/* recommended minimum */
149 	lineargain += 0x0020;
150 
151 	if (lineargain > 2047)
152 		lineargain = 2047;
153 
154 	if (lineargain > 1023) {
155 		digitalgain = 3;
156 		analogmult = 3;
157 		analoginit = lineargain / 16;
158 	} else if (lineargain > 511) {
159 		digitalgain = 1;
160 		analogmult = 3;
161 		analoginit = lineargain / 8;
162 	} else if (lineargain > 255) {
163 		analogmult = 3;
164 		analoginit = lineargain / 4;
165 	} else if (lineargain > 127) {
166 		analogmult = 1;
167 		analoginit = lineargain / 2;
168 	} else
169 		analoginit = lineargain;
170 
171 	return analoginit + (analogmult << 7) + (digitalgain << 9);
172 
173 }
174 
175 static void set_balance(struct v4l2_subdev *sd)
176 {
177 	struct mt9v011 *core = to_mt9v011(sd);
178 	u16 green_gain, blue_gain, red_gain;
179 	u16 exposure;
180 	s16 bal;
181 
182 	exposure = core->exposure;
183 
184 	green_gain = calc_mt9v011_gain(core->global_gain);
185 
186 	bal = core->global_gain;
187 	bal += (core->blue_bal * core->global_gain / (1 << 7));
188 	blue_gain = calc_mt9v011_gain(bal);
189 
190 	bal = core->global_gain;
191 	bal += (core->red_bal * core->global_gain / (1 << 7));
192 	red_gain = calc_mt9v011_gain(bal);
193 
194 	mt9v011_write(sd, R2B_MT9V011_GREEN_1_GAIN, green_gain);
195 	mt9v011_write(sd, R2E_MT9V011_GREEN_2_GAIN, green_gain);
196 	mt9v011_write(sd, R2C_MT9V011_BLUE_GAIN, blue_gain);
197 	mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain);
198 	mt9v011_write(sd, R09_MT9V011_SHUTTER_WIDTH, exposure);
199 }
200 
201 static void calc_fps(struct v4l2_subdev *sd, u32 *numerator, u32 *denominator)
202 {
203 	struct mt9v011 *core = to_mt9v011(sd);
204 	unsigned height, width, hblank, vblank, speed;
205 	unsigned row_time, t_time;
206 	u64 frames_per_ms;
207 	unsigned tmp;
208 
209 	height = mt9v011_read(sd, R03_MT9V011_HEIGHT);
210 	width = mt9v011_read(sd, R04_MT9V011_WIDTH);
211 	hblank = mt9v011_read(sd, R05_MT9V011_HBLANK);
212 	vblank = mt9v011_read(sd, R06_MT9V011_VBLANK);
213 	speed = mt9v011_read(sd, R0A_MT9V011_CLK_SPEED);
214 
215 	row_time = (width + 113 + hblank) * (speed + 2);
216 	t_time = row_time * (height + vblank + 1);
217 
218 	frames_per_ms = core->xtal * 1000l;
219 	do_div(frames_per_ms, t_time);
220 	tmp = frames_per_ms;
221 
222 	v4l2_dbg(1, debug, sd, "Programmed to %u.%03u fps (%d pixel clcks)\n",
223 		tmp / 1000, tmp % 1000, t_time);
224 
225 	if (numerator && denominator) {
226 		*numerator = 1000;
227 		*denominator = (u32)frames_per_ms;
228 	}
229 }
230 
231 static u16 calc_speed(struct v4l2_subdev *sd, u32 numerator, u32 denominator)
232 {
233 	struct mt9v011 *core = to_mt9v011(sd);
234 	unsigned height, width, hblank, vblank;
235 	unsigned row_time, line_time;
236 	u64 t_time, speed;
237 
238 	/* Avoid bogus calculus */
239 	if (!numerator || !denominator)
240 		return 0;
241 
242 	height = mt9v011_read(sd, R03_MT9V011_HEIGHT);
243 	width = mt9v011_read(sd, R04_MT9V011_WIDTH);
244 	hblank = mt9v011_read(sd, R05_MT9V011_HBLANK);
245 	vblank = mt9v011_read(sd, R06_MT9V011_VBLANK);
246 
247 	row_time = width + 113 + hblank;
248 	line_time = height + vblank + 1;
249 
250 	t_time = core->xtal * ((u64)numerator);
251 	/* round to the closest value */
252 	t_time += denominator / 2;
253 	do_div(t_time, denominator);
254 
255 	speed = t_time;
256 	do_div(speed, row_time * line_time);
257 
258 	/* Avoid having a negative value for speed */
259 	if (speed < 2)
260 		speed = 0;
261 	else
262 		speed -= 2;
263 
264 	/* Avoid speed overflow */
265 	if (speed > 15)
266 		return 15;
267 
268 	return (u16)speed;
269 }
270 
271 static void set_res(struct v4l2_subdev *sd)
272 {
273 	struct mt9v011 *core = to_mt9v011(sd);
274 	unsigned vstart, hstart;
275 
276 	/*
277 	 * The mt9v011 doesn't have scaling. So, in order to select the desired
278 	 * resolution, we're cropping at the middle of the sensor.
279 	 * hblank and vblank should be adjusted, in order to warrant that
280 	 * we'll preserve the line timings for 30 fps, no matter what resolution
281 	 * is selected.
282 	 * NOTE: datasheet says that width (and height) should be filled with
283 	 * width-1. However, this doesn't work, since one pixel per line will
284 	 * be missing.
285 	 */
286 
287 	hstart = 20 + (640 - core->width) / 2;
288 	mt9v011_write(sd, R02_MT9V011_COLSTART, hstart);
289 	mt9v011_write(sd, R04_MT9V011_WIDTH, core->width);
290 	mt9v011_write(sd, R05_MT9V011_HBLANK, 771 - core->width);
291 
292 	vstart = 8 + (480 - core->height) / 2;
293 	mt9v011_write(sd, R01_MT9V011_ROWSTART, vstart);
294 	mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height);
295 	mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height);
296 
297 	calc_fps(sd, NULL, NULL);
298 };
299 
300 static void set_read_mode(struct v4l2_subdev *sd)
301 {
302 	struct mt9v011 *core = to_mt9v011(sd);
303 	unsigned mode = 0x1000;
304 
305 	if (core->hflip)
306 		mode |= 0x4000;
307 
308 	if (core->vflip)
309 		mode |= 0x8000;
310 
311 	mt9v011_write(sd, R20_MT9V011_READ_MODE, mode);
312 }
313 
314 static int mt9v011_reset(struct v4l2_subdev *sd, u32 val)
315 {
316 	int i;
317 
318 	for (i = 0; i < ARRAY_SIZE(mt9v011_init_default); i++)
319 		mt9v011_write(sd, mt9v011_init_default[i].reg,
320 			       mt9v011_init_default[i].value);
321 
322 	set_balance(sd);
323 	set_res(sd);
324 	set_read_mode(sd);
325 
326 	return 0;
327 }
328 
329 static int mt9v011_enum_mbus_code(struct v4l2_subdev *sd,
330 		struct v4l2_subdev_state *sd_state,
331 		struct v4l2_subdev_mbus_code_enum *code)
332 {
333 	if (code->pad || code->index > 0)
334 		return -EINVAL;
335 
336 	code->code = MEDIA_BUS_FMT_SGRBG8_1X8;
337 	return 0;
338 }
339 
340 static int mt9v011_set_fmt(struct v4l2_subdev *sd,
341 		struct v4l2_subdev_state *sd_state,
342 		struct v4l2_subdev_format *format)
343 {
344 	struct v4l2_mbus_framefmt *fmt = &format->format;
345 	struct mt9v011 *core = to_mt9v011(sd);
346 
347 	if (format->pad || fmt->code != MEDIA_BUS_FMT_SGRBG8_1X8)
348 		return -EINVAL;
349 
350 	v4l_bound_align_image(&fmt->width, 48, 639, 1,
351 			      &fmt->height, 32, 480, 1, 0);
352 	fmt->field = V4L2_FIELD_NONE;
353 	fmt->colorspace = V4L2_COLORSPACE_SRGB;
354 
355 	if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
356 		core->width = fmt->width;
357 		core->height = fmt->height;
358 
359 		set_res(sd);
360 	} else {
361 		sd_state->pads->try_fmt = *fmt;
362 	}
363 
364 	return 0;
365 }
366 
367 static int mt9v011_g_frame_interval(struct v4l2_subdev *sd,
368 				    struct v4l2_subdev_frame_interval *ival)
369 {
370 	calc_fps(sd,
371 		 &ival->interval.numerator,
372 		 &ival->interval.denominator);
373 
374 	return 0;
375 }
376 
377 static int mt9v011_s_frame_interval(struct v4l2_subdev *sd,
378 				    struct v4l2_subdev_frame_interval *ival)
379 {
380 	struct v4l2_fract *tpf = &ival->interval;
381 	u16 speed;
382 
383 	speed = calc_speed(sd, tpf->numerator, tpf->denominator);
384 
385 	mt9v011_write(sd, R0A_MT9V011_CLK_SPEED, speed);
386 	v4l2_dbg(1, debug, sd, "Setting speed to %d\n", speed);
387 
388 	/* Recalculate and update fps info */
389 	calc_fps(sd, &tpf->numerator, &tpf->denominator);
390 
391 	return 0;
392 }
393 
394 #ifdef CONFIG_VIDEO_ADV_DEBUG
395 static int mt9v011_g_register(struct v4l2_subdev *sd,
396 			      struct v4l2_dbg_register *reg)
397 {
398 	reg->val = mt9v011_read(sd, reg->reg & 0xff);
399 	reg->size = 2;
400 
401 	return 0;
402 }
403 
404 static int mt9v011_s_register(struct v4l2_subdev *sd,
405 			      const struct v4l2_dbg_register *reg)
406 {
407 	mt9v011_write(sd, reg->reg & 0xff, reg->val & 0xffff);
408 
409 	return 0;
410 }
411 #endif
412 
413 static int mt9v011_s_ctrl(struct v4l2_ctrl *ctrl)
414 {
415 	struct mt9v011 *core =
416 		container_of(ctrl->handler, struct mt9v011, ctrls);
417 	struct v4l2_subdev *sd = &core->sd;
418 
419 	switch (ctrl->id) {
420 	case V4L2_CID_GAIN:
421 		core->global_gain = ctrl->val;
422 		break;
423 	case V4L2_CID_EXPOSURE:
424 		core->exposure = ctrl->val;
425 		break;
426 	case V4L2_CID_RED_BALANCE:
427 		core->red_bal = ctrl->val;
428 		break;
429 	case V4L2_CID_BLUE_BALANCE:
430 		core->blue_bal = ctrl->val;
431 		break;
432 	case V4L2_CID_HFLIP:
433 		core->hflip = ctrl->val;
434 		set_read_mode(sd);
435 		return 0;
436 	case V4L2_CID_VFLIP:
437 		core->vflip = ctrl->val;
438 		set_read_mode(sd);
439 		return 0;
440 	default:
441 		return -EINVAL;
442 	}
443 
444 	set_balance(sd);
445 	return 0;
446 }
447 
448 static const struct v4l2_ctrl_ops mt9v011_ctrl_ops = {
449 	.s_ctrl = mt9v011_s_ctrl,
450 };
451 
452 static const struct v4l2_subdev_core_ops mt9v011_core_ops = {
453 	.reset = mt9v011_reset,
454 #ifdef CONFIG_VIDEO_ADV_DEBUG
455 	.g_register = mt9v011_g_register,
456 	.s_register = mt9v011_s_register,
457 #endif
458 };
459 
460 static const struct v4l2_subdev_video_ops mt9v011_video_ops = {
461 	.g_frame_interval = mt9v011_g_frame_interval,
462 	.s_frame_interval = mt9v011_s_frame_interval,
463 };
464 
465 static const struct v4l2_subdev_pad_ops mt9v011_pad_ops = {
466 	.enum_mbus_code = mt9v011_enum_mbus_code,
467 	.set_fmt = mt9v011_set_fmt,
468 };
469 
470 static const struct v4l2_subdev_ops mt9v011_ops = {
471 	.core  = &mt9v011_core_ops,
472 	.video = &mt9v011_video_ops,
473 	.pad   = &mt9v011_pad_ops,
474 };
475 
476 
477 /****************************************************************************
478 			I2C Client & Driver
479  ****************************************************************************/
480 
481 static int mt9v011_probe(struct i2c_client *c,
482 			 const struct i2c_device_id *id)
483 {
484 	u16 version;
485 	struct mt9v011 *core;
486 	struct v4l2_subdev *sd;
487 #ifdef CONFIG_MEDIA_CONTROLLER
488 	int ret;
489 #endif
490 
491 	/* Check if the adapter supports the needed features */
492 	if (!i2c_check_functionality(c->adapter,
493 	     I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
494 		return -EIO;
495 
496 	core = devm_kzalloc(&c->dev, sizeof(struct mt9v011), GFP_KERNEL);
497 	if (!core)
498 		return -ENOMEM;
499 
500 	sd = &core->sd;
501 	v4l2_i2c_subdev_init(sd, c, &mt9v011_ops);
502 
503 #ifdef CONFIG_MEDIA_CONTROLLER
504 	core->pad.flags = MEDIA_PAD_FL_SOURCE;
505 	sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
506 
507 	ret = media_entity_pads_init(&sd->entity, 1, &core->pad);
508 	if (ret < 0)
509 		return ret;
510 #endif
511 
512 	/* Check if the sensor is really a MT9V011 */
513 	version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION);
514 	if ((version != MT9V011_VERSION) &&
515 	    (version != MT9V011_REV_B_VERSION)) {
516 		v4l2_info(sd, "*** unknown micron chip detected (0x%04x).\n",
517 			  version);
518 		return -EINVAL;
519 	}
520 
521 	v4l2_ctrl_handler_init(&core->ctrls, 5);
522 	v4l2_ctrl_new_std(&core->ctrls, &mt9v011_ctrl_ops,
523 			  V4L2_CID_GAIN, 0, (1 << 12) - 1 - 0x20, 1, 0x20);
524 	v4l2_ctrl_new_std(&core->ctrls, &mt9v011_ctrl_ops,
525 			  V4L2_CID_EXPOSURE, 0, 2047, 1, 0x01fc);
526 	v4l2_ctrl_new_std(&core->ctrls, &mt9v011_ctrl_ops,
527 			  V4L2_CID_RED_BALANCE, -(1 << 9), (1 << 9) - 1, 1, 0);
528 	v4l2_ctrl_new_std(&core->ctrls, &mt9v011_ctrl_ops,
529 			  V4L2_CID_BLUE_BALANCE, -(1 << 9), (1 << 9) - 1, 1, 0);
530 	v4l2_ctrl_new_std(&core->ctrls, &mt9v011_ctrl_ops,
531 			  V4L2_CID_HFLIP, 0, 1, 1, 0);
532 	v4l2_ctrl_new_std(&core->ctrls, &mt9v011_ctrl_ops,
533 			  V4L2_CID_VFLIP, 0, 1, 1, 0);
534 
535 	if (core->ctrls.error) {
536 		int ret = core->ctrls.error;
537 
538 		v4l2_err(sd, "control initialization error %d\n", ret);
539 		v4l2_ctrl_handler_free(&core->ctrls);
540 		return ret;
541 	}
542 	core->sd.ctrl_handler = &core->ctrls;
543 
544 	core->global_gain = 0x0024;
545 	core->exposure = 0x01fc;
546 	core->width  = 640;
547 	core->height = 480;
548 	core->xtal = 27000000;	/* Hz */
549 
550 	if (c->dev.platform_data) {
551 		struct mt9v011_platform_data *pdata = c->dev.platform_data;
552 
553 		core->xtal = pdata->xtal;
554 		v4l2_dbg(1, debug, sd, "xtal set to %d.%03d MHz\n",
555 			core->xtal / 1000000, (core->xtal / 1000) % 1000);
556 	}
557 
558 	v4l_info(c, "chip found @ 0x%02x (%s - chip version 0x%04x)\n",
559 		 c->addr << 1, c->adapter->name, version);
560 
561 	return 0;
562 }
563 
564 static int mt9v011_remove(struct i2c_client *c)
565 {
566 	struct v4l2_subdev *sd = i2c_get_clientdata(c);
567 	struct mt9v011 *core = to_mt9v011(sd);
568 
569 	v4l2_dbg(1, debug, sd,
570 		"mt9v011.c: removing mt9v011 adapter on address 0x%x\n",
571 		c->addr << 1);
572 
573 	v4l2_device_unregister_subdev(sd);
574 	v4l2_ctrl_handler_free(&core->ctrls);
575 
576 	return 0;
577 }
578 
579 /* ----------------------------------------------------------------------- */
580 
581 static const struct i2c_device_id mt9v011_id[] = {
582 	{ "mt9v011", 0 },
583 	{ }
584 };
585 MODULE_DEVICE_TABLE(i2c, mt9v011_id);
586 
587 static struct i2c_driver mt9v011_driver = {
588 	.driver = {
589 		.name	= "mt9v011",
590 	},
591 	.probe		= mt9v011_probe,
592 	.remove		= mt9v011_remove,
593 	.id_table	= mt9v011_id,
594 };
595 
596 module_i2c_driver(mt9v011_driver);
597