1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Driver for MT9M001 CMOS Image Sensor from Micron 4 * 5 * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> 6 */ 7 8 #include <linux/clk.h> 9 #include <linux/delay.h> 10 #include <linux/gpio/consumer.h> 11 #include <linux/i2c.h> 12 #include <linux/log2.h> 13 #include <linux/module.h> 14 #include <linux/pm_runtime.h> 15 #include <linux/slab.h> 16 #include <linux/videodev2.h> 17 18 #include <media/v4l2-ctrls.h> 19 #include <media/v4l2-device.h> 20 #include <media/v4l2-event.h> 21 #include <media/v4l2-subdev.h> 22 23 /* 24 * mt9m001 i2c address 0x5d 25 */ 26 27 /* mt9m001 selected register addresses */ 28 #define MT9M001_CHIP_VERSION 0x00 29 #define MT9M001_ROW_START 0x01 30 #define MT9M001_COLUMN_START 0x02 31 #define MT9M001_WINDOW_HEIGHT 0x03 32 #define MT9M001_WINDOW_WIDTH 0x04 33 #define MT9M001_HORIZONTAL_BLANKING 0x05 34 #define MT9M001_VERTICAL_BLANKING 0x06 35 #define MT9M001_OUTPUT_CONTROL 0x07 36 #define MT9M001_SHUTTER_WIDTH 0x09 37 #define MT9M001_FRAME_RESTART 0x0b 38 #define MT9M001_SHUTTER_DELAY 0x0c 39 #define MT9M001_RESET 0x0d 40 #define MT9M001_READ_OPTIONS1 0x1e 41 #define MT9M001_READ_OPTIONS2 0x20 42 #define MT9M001_GLOBAL_GAIN 0x35 43 #define MT9M001_CHIP_ENABLE 0xF1 44 45 #define MT9M001_MAX_WIDTH 1280 46 #define MT9M001_MAX_HEIGHT 1024 47 #define MT9M001_MIN_WIDTH 48 48 #define MT9M001_MIN_HEIGHT 32 49 #define MT9M001_COLUMN_SKIP 20 50 #define MT9M001_ROW_SKIP 12 51 #define MT9M001_DEFAULT_HBLANK 9 52 #define MT9M001_DEFAULT_VBLANK 25 53 54 /* MT9M001 has only one fixed colorspace per pixelcode */ 55 struct mt9m001_datafmt { 56 u32 code; 57 enum v4l2_colorspace colorspace; 58 }; 59 60 /* Find a data format by a pixel code in an array */ 61 static const struct mt9m001_datafmt *mt9m001_find_datafmt( 62 u32 code, const struct mt9m001_datafmt *fmt, 63 int n) 64 { 65 int i; 66 for (i = 0; i < n; i++) 67 if (fmt[i].code == code) 68 return fmt + i; 69 70 return NULL; 71 } 72 73 static const struct mt9m001_datafmt mt9m001_colour_fmts[] = { 74 /* 75 * Order important: first natively supported, 76 * second supported with a GPIO extender 77 */ 78 {MEDIA_BUS_FMT_SBGGR10_1X10, V4L2_COLORSPACE_SRGB}, 79 {MEDIA_BUS_FMT_SBGGR8_1X8, V4L2_COLORSPACE_SRGB}, 80 }; 81 82 static const struct mt9m001_datafmt mt9m001_monochrome_fmts[] = { 83 /* Order important - see above */ 84 {MEDIA_BUS_FMT_Y10_1X10, V4L2_COLORSPACE_JPEG}, 85 {MEDIA_BUS_FMT_Y8_1X8, V4L2_COLORSPACE_JPEG}, 86 }; 87 88 struct mt9m001 { 89 struct v4l2_subdev subdev; 90 struct v4l2_ctrl_handler hdl; 91 struct { 92 /* exposure/auto-exposure cluster */ 93 struct v4l2_ctrl *autoexposure; 94 struct v4l2_ctrl *exposure; 95 }; 96 bool streaming; 97 struct mutex mutex; 98 struct v4l2_rect rect; /* Sensor window */ 99 struct clk *clk; 100 struct gpio_desc *standby_gpio; 101 struct gpio_desc *reset_gpio; 102 const struct mt9m001_datafmt *fmt; 103 const struct mt9m001_datafmt *fmts; 104 int num_fmts; 105 unsigned int total_h; 106 unsigned short y_skip_top; /* Lines to skip at the top */ 107 struct media_pad pad; 108 }; 109 110 static struct mt9m001 *to_mt9m001(const struct i2c_client *client) 111 { 112 return container_of(i2c_get_clientdata(client), struct mt9m001, subdev); 113 } 114 115 static int reg_read(struct i2c_client *client, const u8 reg) 116 { 117 return i2c_smbus_read_word_swapped(client, reg); 118 } 119 120 static int reg_write(struct i2c_client *client, const u8 reg, 121 const u16 data) 122 { 123 return i2c_smbus_write_word_swapped(client, reg, data); 124 } 125 126 static int reg_set(struct i2c_client *client, const u8 reg, 127 const u16 data) 128 { 129 int ret; 130 131 ret = reg_read(client, reg); 132 if (ret < 0) 133 return ret; 134 return reg_write(client, reg, ret | data); 135 } 136 137 static int reg_clear(struct i2c_client *client, const u8 reg, 138 const u16 data) 139 { 140 int ret; 141 142 ret = reg_read(client, reg); 143 if (ret < 0) 144 return ret; 145 return reg_write(client, reg, ret & ~data); 146 } 147 148 struct mt9m001_reg { 149 u8 reg; 150 u16 data; 151 }; 152 153 static int multi_reg_write(struct i2c_client *client, 154 const struct mt9m001_reg *regs, int num) 155 { 156 int i; 157 158 for (i = 0; i < num; i++) { 159 int ret = reg_write(client, regs[i].reg, regs[i].data); 160 161 if (ret) 162 return ret; 163 } 164 165 return 0; 166 } 167 168 static int mt9m001_init(struct i2c_client *client) 169 { 170 static const struct mt9m001_reg init_regs[] = { 171 /* 172 * Issue a soft reset. This returns all registers to their 173 * default values. 174 */ 175 { MT9M001_RESET, 1 }, 176 { MT9M001_RESET, 0 }, 177 /* Disable chip, synchronous option update */ 178 { MT9M001_OUTPUT_CONTROL, 0 } 179 }; 180 181 dev_dbg(&client->dev, "%s\n", __func__); 182 183 return multi_reg_write(client, init_regs, ARRAY_SIZE(init_regs)); 184 } 185 186 static int mt9m001_apply_selection(struct v4l2_subdev *sd) 187 { 188 struct i2c_client *client = v4l2_get_subdevdata(sd); 189 struct mt9m001 *mt9m001 = to_mt9m001(client); 190 const struct mt9m001_reg regs[] = { 191 /* Blanking and start values - default... */ 192 { MT9M001_HORIZONTAL_BLANKING, MT9M001_DEFAULT_HBLANK }, 193 { MT9M001_VERTICAL_BLANKING, MT9M001_DEFAULT_VBLANK }, 194 /* 195 * The caller provides a supported format, as verified per 196 * call to .set_fmt(FORMAT_TRY). 197 */ 198 { MT9M001_COLUMN_START, mt9m001->rect.left }, 199 { MT9M001_ROW_START, mt9m001->rect.top }, 200 { MT9M001_WINDOW_WIDTH, mt9m001->rect.width - 1 }, 201 { MT9M001_WINDOW_HEIGHT, 202 mt9m001->rect.height + mt9m001->y_skip_top - 1 }, 203 }; 204 205 return multi_reg_write(client, regs, ARRAY_SIZE(regs)); 206 } 207 208 static int mt9m001_s_stream(struct v4l2_subdev *sd, int enable) 209 { 210 struct i2c_client *client = v4l2_get_subdevdata(sd); 211 struct mt9m001 *mt9m001 = to_mt9m001(client); 212 int ret = 0; 213 214 mutex_lock(&mt9m001->mutex); 215 216 if (mt9m001->streaming == enable) 217 goto done; 218 219 if (enable) { 220 ret = pm_runtime_resume_and_get(&client->dev); 221 if (ret < 0) 222 goto unlock; 223 224 ret = mt9m001_apply_selection(sd); 225 if (ret) 226 goto put_unlock; 227 228 ret = __v4l2_ctrl_handler_setup(&mt9m001->hdl); 229 if (ret) 230 goto put_unlock; 231 232 /* Switch to master "normal" mode */ 233 ret = reg_write(client, MT9M001_OUTPUT_CONTROL, 2); 234 if (ret < 0) 235 goto put_unlock; 236 } else { 237 /* Switch to master stop sensor readout */ 238 reg_write(client, MT9M001_OUTPUT_CONTROL, 0); 239 pm_runtime_put(&client->dev); 240 } 241 242 mt9m001->streaming = enable; 243 done: 244 mutex_unlock(&mt9m001->mutex); 245 246 return 0; 247 248 put_unlock: 249 pm_runtime_put(&client->dev); 250 unlock: 251 mutex_unlock(&mt9m001->mutex); 252 253 return ret; 254 } 255 256 static int mt9m001_set_selection(struct v4l2_subdev *sd, 257 struct v4l2_subdev_state *sd_state, 258 struct v4l2_subdev_selection *sel) 259 { 260 struct i2c_client *client = v4l2_get_subdevdata(sd); 261 struct mt9m001 *mt9m001 = to_mt9m001(client); 262 struct v4l2_rect rect = sel->r; 263 264 if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE || 265 sel->target != V4L2_SEL_TGT_CROP) 266 return -EINVAL; 267 268 if (mt9m001->fmts == mt9m001_colour_fmts) 269 /* 270 * Bayer format - even number of rows for simplicity, 271 * but let the user play with the top row. 272 */ 273 rect.height = ALIGN(rect.height, 2); 274 275 /* Datasheet requirement: see register description */ 276 rect.width = ALIGN(rect.width, 2); 277 rect.left = ALIGN(rect.left, 2); 278 279 rect.width = clamp_t(u32, rect.width, MT9M001_MIN_WIDTH, 280 MT9M001_MAX_WIDTH); 281 rect.left = clamp_t(u32, rect.left, MT9M001_COLUMN_SKIP, 282 MT9M001_COLUMN_SKIP + MT9M001_MAX_WIDTH - rect.width); 283 284 rect.height = clamp_t(u32, rect.height, MT9M001_MIN_HEIGHT, 285 MT9M001_MAX_HEIGHT); 286 rect.top = clamp_t(u32, rect.top, MT9M001_ROW_SKIP, 287 MT9M001_ROW_SKIP + MT9M001_MAX_HEIGHT - rect.height); 288 289 mt9m001->total_h = rect.height + mt9m001->y_skip_top + 290 MT9M001_DEFAULT_VBLANK; 291 292 mt9m001->rect = rect; 293 294 return 0; 295 } 296 297 static int mt9m001_get_selection(struct v4l2_subdev *sd, 298 struct v4l2_subdev_state *sd_state, 299 struct v4l2_subdev_selection *sel) 300 { 301 struct i2c_client *client = v4l2_get_subdevdata(sd); 302 struct mt9m001 *mt9m001 = to_mt9m001(client); 303 304 if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE) 305 return -EINVAL; 306 307 switch (sel->target) { 308 case V4L2_SEL_TGT_CROP_BOUNDS: 309 sel->r.left = MT9M001_COLUMN_SKIP; 310 sel->r.top = MT9M001_ROW_SKIP; 311 sel->r.width = MT9M001_MAX_WIDTH; 312 sel->r.height = MT9M001_MAX_HEIGHT; 313 return 0; 314 case V4L2_SEL_TGT_CROP: 315 sel->r = mt9m001->rect; 316 return 0; 317 default: 318 return -EINVAL; 319 } 320 } 321 322 static int mt9m001_get_fmt(struct v4l2_subdev *sd, 323 struct v4l2_subdev_state *sd_state, 324 struct v4l2_subdev_format *format) 325 { 326 struct i2c_client *client = v4l2_get_subdevdata(sd); 327 struct mt9m001 *mt9m001 = to_mt9m001(client); 328 struct v4l2_mbus_framefmt *mf = &format->format; 329 330 if (format->pad) 331 return -EINVAL; 332 333 if (format->which == V4L2_SUBDEV_FORMAT_TRY) { 334 mf = v4l2_subdev_get_try_format(sd, sd_state, 0); 335 format->format = *mf; 336 return 0; 337 } 338 339 mf->width = mt9m001->rect.width; 340 mf->height = mt9m001->rect.height; 341 mf->code = mt9m001->fmt->code; 342 mf->colorspace = mt9m001->fmt->colorspace; 343 mf->field = V4L2_FIELD_NONE; 344 mf->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; 345 mf->quantization = V4L2_QUANTIZATION_DEFAULT; 346 mf->xfer_func = V4L2_XFER_FUNC_DEFAULT; 347 348 return 0; 349 } 350 351 static int mt9m001_s_fmt(struct v4l2_subdev *sd, 352 const struct mt9m001_datafmt *fmt, 353 struct v4l2_mbus_framefmt *mf) 354 { 355 struct i2c_client *client = v4l2_get_subdevdata(sd); 356 struct mt9m001 *mt9m001 = to_mt9m001(client); 357 struct v4l2_subdev_selection sel = { 358 .which = V4L2_SUBDEV_FORMAT_ACTIVE, 359 .target = V4L2_SEL_TGT_CROP, 360 .r.left = mt9m001->rect.left, 361 .r.top = mt9m001->rect.top, 362 .r.width = mf->width, 363 .r.height = mf->height, 364 }; 365 int ret; 366 367 /* No support for scaling so far, just crop. TODO: use skipping */ 368 ret = mt9m001_set_selection(sd, NULL, &sel); 369 if (!ret) { 370 mf->width = mt9m001->rect.width; 371 mf->height = mt9m001->rect.height; 372 mt9m001->fmt = fmt; 373 mf->colorspace = fmt->colorspace; 374 } 375 376 return ret; 377 } 378 379 static int mt9m001_set_fmt(struct v4l2_subdev *sd, 380 struct v4l2_subdev_state *sd_state, 381 struct v4l2_subdev_format *format) 382 { 383 struct v4l2_mbus_framefmt *mf = &format->format; 384 struct i2c_client *client = v4l2_get_subdevdata(sd); 385 struct mt9m001 *mt9m001 = to_mt9m001(client); 386 const struct mt9m001_datafmt *fmt; 387 388 if (format->pad) 389 return -EINVAL; 390 391 v4l_bound_align_image(&mf->width, MT9M001_MIN_WIDTH, 392 MT9M001_MAX_WIDTH, 1, 393 &mf->height, MT9M001_MIN_HEIGHT + mt9m001->y_skip_top, 394 MT9M001_MAX_HEIGHT + mt9m001->y_skip_top, 0, 0); 395 396 if (mt9m001->fmts == mt9m001_colour_fmts) 397 mf->height = ALIGN(mf->height - 1, 2); 398 399 fmt = mt9m001_find_datafmt(mf->code, mt9m001->fmts, 400 mt9m001->num_fmts); 401 if (!fmt) { 402 fmt = mt9m001->fmt; 403 mf->code = fmt->code; 404 } 405 406 mf->colorspace = fmt->colorspace; 407 mf->field = V4L2_FIELD_NONE; 408 mf->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; 409 mf->quantization = V4L2_QUANTIZATION_DEFAULT; 410 mf->xfer_func = V4L2_XFER_FUNC_DEFAULT; 411 412 if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) 413 return mt9m001_s_fmt(sd, fmt, mf); 414 sd_state->pads->try_fmt = *mf; 415 return 0; 416 } 417 418 #ifdef CONFIG_VIDEO_ADV_DEBUG 419 static int mt9m001_g_register(struct v4l2_subdev *sd, 420 struct v4l2_dbg_register *reg) 421 { 422 struct i2c_client *client = v4l2_get_subdevdata(sd); 423 424 if (reg->reg > 0xff) 425 return -EINVAL; 426 427 reg->size = 2; 428 reg->val = reg_read(client, reg->reg); 429 430 if (reg->val > 0xffff) 431 return -EIO; 432 433 return 0; 434 } 435 436 static int mt9m001_s_register(struct v4l2_subdev *sd, 437 const struct v4l2_dbg_register *reg) 438 { 439 struct i2c_client *client = v4l2_get_subdevdata(sd); 440 441 if (reg->reg > 0xff) 442 return -EINVAL; 443 444 if (reg_write(client, reg->reg, reg->val) < 0) 445 return -EIO; 446 447 return 0; 448 } 449 #endif 450 451 static int mt9m001_power_on(struct device *dev) 452 { 453 struct i2c_client *client = to_i2c_client(dev); 454 struct mt9m001 *mt9m001 = to_mt9m001(client); 455 int ret; 456 457 ret = clk_prepare_enable(mt9m001->clk); 458 if (ret) 459 return ret; 460 461 if (mt9m001->standby_gpio) { 462 gpiod_set_value_cansleep(mt9m001->standby_gpio, 0); 463 usleep_range(1000, 2000); 464 } 465 466 if (mt9m001->reset_gpio) { 467 gpiod_set_value_cansleep(mt9m001->reset_gpio, 1); 468 usleep_range(1000, 2000); 469 gpiod_set_value_cansleep(mt9m001->reset_gpio, 0); 470 usleep_range(1000, 2000); 471 } 472 473 return 0; 474 } 475 476 static int mt9m001_power_off(struct device *dev) 477 { 478 struct i2c_client *client = to_i2c_client(dev); 479 struct mt9m001 *mt9m001 = to_mt9m001(client); 480 481 gpiod_set_value_cansleep(mt9m001->standby_gpio, 1); 482 clk_disable_unprepare(mt9m001->clk); 483 484 return 0; 485 } 486 487 static int mt9m001_g_volatile_ctrl(struct v4l2_ctrl *ctrl) 488 { 489 struct mt9m001 *mt9m001 = container_of(ctrl->handler, 490 struct mt9m001, hdl); 491 s32 min, max; 492 493 switch (ctrl->id) { 494 case V4L2_CID_EXPOSURE_AUTO: 495 min = mt9m001->exposure->minimum; 496 max = mt9m001->exposure->maximum; 497 mt9m001->exposure->val = 498 (524 + (mt9m001->total_h - 1) * (max - min)) / 1048 + min; 499 break; 500 } 501 return 0; 502 } 503 504 static int mt9m001_s_ctrl(struct v4l2_ctrl *ctrl) 505 { 506 struct mt9m001 *mt9m001 = container_of(ctrl->handler, 507 struct mt9m001, hdl); 508 struct v4l2_subdev *sd = &mt9m001->subdev; 509 struct i2c_client *client = v4l2_get_subdevdata(sd); 510 struct v4l2_ctrl *exp = mt9m001->exposure; 511 int data; 512 int ret; 513 514 if (!pm_runtime_get_if_in_use(&client->dev)) 515 return 0; 516 517 switch (ctrl->id) { 518 case V4L2_CID_VFLIP: 519 if (ctrl->val) 520 ret = reg_set(client, MT9M001_READ_OPTIONS2, 0x8000); 521 else 522 ret = reg_clear(client, MT9M001_READ_OPTIONS2, 0x8000); 523 break; 524 525 case V4L2_CID_GAIN: 526 /* See Datasheet Table 7, Gain settings. */ 527 if (ctrl->val <= ctrl->default_value) { 528 /* Pack it into 0..1 step 0.125, register values 0..8 */ 529 unsigned long range = ctrl->default_value - ctrl->minimum; 530 data = ((ctrl->val - (s32)ctrl->minimum) * 8 + range / 2) / range; 531 532 dev_dbg(&client->dev, "Setting gain %d\n", data); 533 ret = reg_write(client, MT9M001_GLOBAL_GAIN, data); 534 } else { 535 /* Pack it into 1.125..15 variable step, register values 9..67 */ 536 /* We assume qctrl->maximum - qctrl->default_value - 1 > 0 */ 537 unsigned long range = ctrl->maximum - ctrl->default_value - 1; 538 unsigned long gain = ((ctrl->val - (s32)ctrl->default_value - 1) * 539 111 + range / 2) / range + 9; 540 541 if (gain <= 32) 542 data = gain; 543 else if (gain <= 64) 544 data = ((gain - 32) * 16 + 16) / 32 + 80; 545 else 546 data = ((gain - 64) * 7 + 28) / 56 + 96; 547 548 dev_dbg(&client->dev, "Setting gain from %d to %d\n", 549 reg_read(client, MT9M001_GLOBAL_GAIN), data); 550 ret = reg_write(client, MT9M001_GLOBAL_GAIN, data); 551 } 552 break; 553 554 case V4L2_CID_EXPOSURE_AUTO: 555 if (ctrl->val == V4L2_EXPOSURE_MANUAL) { 556 unsigned long range = exp->maximum - exp->minimum; 557 unsigned long shutter = ((exp->val - (s32)exp->minimum) * 1048 + 558 range / 2) / range + 1; 559 560 dev_dbg(&client->dev, 561 "Setting shutter width from %d to %lu\n", 562 reg_read(client, MT9M001_SHUTTER_WIDTH), shutter); 563 ret = reg_write(client, MT9M001_SHUTTER_WIDTH, shutter); 564 } else { 565 mt9m001->total_h = mt9m001->rect.height + 566 mt9m001->y_skip_top + MT9M001_DEFAULT_VBLANK; 567 ret = reg_write(client, MT9M001_SHUTTER_WIDTH, 568 mt9m001->total_h); 569 } 570 break; 571 default: 572 ret = -EINVAL; 573 break; 574 } 575 576 pm_runtime_put(&client->dev); 577 578 return ret; 579 } 580 581 /* 582 * Interface active, can use i2c. If it fails, it can indeed mean, that 583 * this wasn't our capture interface, so, we wait for the right one 584 */ 585 static int mt9m001_video_probe(struct i2c_client *client) 586 { 587 struct mt9m001 *mt9m001 = to_mt9m001(client); 588 s32 data; 589 int ret; 590 591 /* Enable the chip */ 592 data = reg_write(client, MT9M001_CHIP_ENABLE, 1); 593 dev_dbg(&client->dev, "write: %d\n", data); 594 595 /* Read out the chip version register */ 596 data = reg_read(client, MT9M001_CHIP_VERSION); 597 598 /* must be 0x8411 or 0x8421 for colour sensor and 8431 for bw */ 599 switch (data) { 600 case 0x8411: 601 case 0x8421: 602 mt9m001->fmts = mt9m001_colour_fmts; 603 mt9m001->num_fmts = ARRAY_SIZE(mt9m001_colour_fmts); 604 break; 605 case 0x8431: 606 mt9m001->fmts = mt9m001_monochrome_fmts; 607 mt9m001->num_fmts = ARRAY_SIZE(mt9m001_monochrome_fmts); 608 break; 609 default: 610 dev_err(&client->dev, 611 "No MT9M001 chip detected, register read %x\n", data); 612 ret = -ENODEV; 613 goto done; 614 } 615 616 mt9m001->fmt = &mt9m001->fmts[0]; 617 618 dev_info(&client->dev, "Detected a MT9M001 chip ID %x (%s)\n", data, 619 data == 0x8431 ? "C12STM" : "C12ST"); 620 621 ret = mt9m001_init(client); 622 if (ret < 0) { 623 dev_err(&client->dev, "Failed to initialise the camera\n"); 624 goto done; 625 } 626 627 /* mt9m001_init() has reset the chip, returning registers to defaults */ 628 ret = v4l2_ctrl_handler_setup(&mt9m001->hdl); 629 630 done: 631 return ret; 632 } 633 634 static int mt9m001_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines) 635 { 636 struct i2c_client *client = v4l2_get_subdevdata(sd); 637 struct mt9m001 *mt9m001 = to_mt9m001(client); 638 639 *lines = mt9m001->y_skip_top; 640 641 return 0; 642 } 643 644 static const struct v4l2_ctrl_ops mt9m001_ctrl_ops = { 645 .g_volatile_ctrl = mt9m001_g_volatile_ctrl, 646 .s_ctrl = mt9m001_s_ctrl, 647 }; 648 649 static const struct v4l2_subdev_core_ops mt9m001_subdev_core_ops = { 650 .log_status = v4l2_ctrl_subdev_log_status, 651 .subscribe_event = v4l2_ctrl_subdev_subscribe_event, 652 .unsubscribe_event = v4l2_event_subdev_unsubscribe, 653 #ifdef CONFIG_VIDEO_ADV_DEBUG 654 .g_register = mt9m001_g_register, 655 .s_register = mt9m001_s_register, 656 #endif 657 }; 658 659 static int mt9m001_init_cfg(struct v4l2_subdev *sd, 660 struct v4l2_subdev_state *sd_state) 661 { 662 struct i2c_client *client = v4l2_get_subdevdata(sd); 663 struct mt9m001 *mt9m001 = to_mt9m001(client); 664 struct v4l2_mbus_framefmt *try_fmt = 665 v4l2_subdev_get_try_format(sd, sd_state, 0); 666 667 try_fmt->width = MT9M001_MAX_WIDTH; 668 try_fmt->height = MT9M001_MAX_HEIGHT; 669 try_fmt->code = mt9m001->fmts[0].code; 670 try_fmt->colorspace = mt9m001->fmts[0].colorspace; 671 try_fmt->field = V4L2_FIELD_NONE; 672 try_fmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; 673 try_fmt->quantization = V4L2_QUANTIZATION_DEFAULT; 674 try_fmt->xfer_func = V4L2_XFER_FUNC_DEFAULT; 675 676 return 0; 677 } 678 679 static int mt9m001_enum_mbus_code(struct v4l2_subdev *sd, 680 struct v4l2_subdev_state *sd_state, 681 struct v4l2_subdev_mbus_code_enum *code) 682 { 683 struct i2c_client *client = v4l2_get_subdevdata(sd); 684 struct mt9m001 *mt9m001 = to_mt9m001(client); 685 686 if (code->pad || code->index >= mt9m001->num_fmts) 687 return -EINVAL; 688 689 code->code = mt9m001->fmts[code->index].code; 690 return 0; 691 } 692 693 static int mt9m001_get_mbus_config(struct v4l2_subdev *sd, 694 unsigned int pad, 695 struct v4l2_mbus_config *cfg) 696 { 697 /* MT9M001 has all capture_format parameters fixed */ 698 cfg->type = V4L2_MBUS_PARALLEL; 699 cfg->bus.parallel.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | 700 V4L2_MBUS_HSYNC_ACTIVE_HIGH | 701 V4L2_MBUS_VSYNC_ACTIVE_HIGH | 702 V4L2_MBUS_DATA_ACTIVE_HIGH | 703 V4L2_MBUS_MASTER; 704 705 return 0; 706 } 707 708 static const struct v4l2_subdev_video_ops mt9m001_subdev_video_ops = { 709 .s_stream = mt9m001_s_stream, 710 }; 711 712 static const struct v4l2_subdev_sensor_ops mt9m001_subdev_sensor_ops = { 713 .g_skip_top_lines = mt9m001_g_skip_top_lines, 714 }; 715 716 static const struct v4l2_subdev_pad_ops mt9m001_subdev_pad_ops = { 717 .init_cfg = mt9m001_init_cfg, 718 .enum_mbus_code = mt9m001_enum_mbus_code, 719 .get_selection = mt9m001_get_selection, 720 .set_selection = mt9m001_set_selection, 721 .get_fmt = mt9m001_get_fmt, 722 .set_fmt = mt9m001_set_fmt, 723 .get_mbus_config = mt9m001_get_mbus_config, 724 }; 725 726 static const struct v4l2_subdev_ops mt9m001_subdev_ops = { 727 .core = &mt9m001_subdev_core_ops, 728 .video = &mt9m001_subdev_video_ops, 729 .sensor = &mt9m001_subdev_sensor_ops, 730 .pad = &mt9m001_subdev_pad_ops, 731 }; 732 733 static int mt9m001_probe(struct i2c_client *client) 734 { 735 struct mt9m001 *mt9m001; 736 struct i2c_adapter *adapter = client->adapter; 737 int ret; 738 739 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { 740 dev_warn(&adapter->dev, 741 "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); 742 return -EIO; 743 } 744 745 mt9m001 = devm_kzalloc(&client->dev, sizeof(*mt9m001), GFP_KERNEL); 746 if (!mt9m001) 747 return -ENOMEM; 748 749 mt9m001->clk = devm_clk_get(&client->dev, NULL); 750 if (IS_ERR(mt9m001->clk)) 751 return PTR_ERR(mt9m001->clk); 752 753 mt9m001->standby_gpio = devm_gpiod_get_optional(&client->dev, "standby", 754 GPIOD_OUT_LOW); 755 if (IS_ERR(mt9m001->standby_gpio)) 756 return PTR_ERR(mt9m001->standby_gpio); 757 758 mt9m001->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset", 759 GPIOD_OUT_LOW); 760 if (IS_ERR(mt9m001->reset_gpio)) 761 return PTR_ERR(mt9m001->reset_gpio); 762 763 v4l2_i2c_subdev_init(&mt9m001->subdev, client, &mt9m001_subdev_ops); 764 mt9m001->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | 765 V4L2_SUBDEV_FL_HAS_EVENTS; 766 v4l2_ctrl_handler_init(&mt9m001->hdl, 4); 767 v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops, 768 V4L2_CID_VFLIP, 0, 1, 1, 0); 769 v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops, 770 V4L2_CID_GAIN, 0, 127, 1, 64); 771 mt9m001->exposure = v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops, 772 V4L2_CID_EXPOSURE, 1, 255, 1, 255); 773 /* 774 * Simulated autoexposure. If enabled, we calculate shutter width 775 * ourselves in the driver based on vertical blanking and frame width 776 */ 777 mt9m001->autoexposure = v4l2_ctrl_new_std_menu(&mt9m001->hdl, 778 &mt9m001_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0, 779 V4L2_EXPOSURE_AUTO); 780 mt9m001->subdev.ctrl_handler = &mt9m001->hdl; 781 if (mt9m001->hdl.error) 782 return mt9m001->hdl.error; 783 784 v4l2_ctrl_auto_cluster(2, &mt9m001->autoexposure, 785 V4L2_EXPOSURE_MANUAL, true); 786 787 mutex_init(&mt9m001->mutex); 788 mt9m001->hdl.lock = &mt9m001->mutex; 789 790 /* Second stage probe - when a capture adapter is there */ 791 mt9m001->y_skip_top = 0; 792 mt9m001->rect.left = MT9M001_COLUMN_SKIP; 793 mt9m001->rect.top = MT9M001_ROW_SKIP; 794 mt9m001->rect.width = MT9M001_MAX_WIDTH; 795 mt9m001->rect.height = MT9M001_MAX_HEIGHT; 796 797 ret = mt9m001_power_on(&client->dev); 798 if (ret) 799 goto error_hdl_free; 800 801 pm_runtime_set_active(&client->dev); 802 pm_runtime_enable(&client->dev); 803 804 ret = mt9m001_video_probe(client); 805 if (ret) 806 goto error_power_off; 807 808 mt9m001->pad.flags = MEDIA_PAD_FL_SOURCE; 809 mt9m001->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR; 810 ret = media_entity_pads_init(&mt9m001->subdev.entity, 1, &mt9m001->pad); 811 if (ret) 812 goto error_power_off; 813 814 ret = v4l2_async_register_subdev(&mt9m001->subdev); 815 if (ret) 816 goto error_entity_cleanup; 817 818 pm_runtime_idle(&client->dev); 819 820 return 0; 821 822 error_entity_cleanup: 823 media_entity_cleanup(&mt9m001->subdev.entity); 824 error_power_off: 825 pm_runtime_disable(&client->dev); 826 pm_runtime_set_suspended(&client->dev); 827 mt9m001_power_off(&client->dev); 828 829 error_hdl_free: 830 v4l2_ctrl_handler_free(&mt9m001->hdl); 831 mutex_destroy(&mt9m001->mutex); 832 833 return ret; 834 } 835 836 static int mt9m001_remove(struct i2c_client *client) 837 { 838 struct mt9m001 *mt9m001 = to_mt9m001(client); 839 840 /* 841 * As it increments RPM usage_count even on errors, we don't need to 842 * check the returned code here. 843 */ 844 pm_runtime_get_sync(&client->dev); 845 846 v4l2_async_unregister_subdev(&mt9m001->subdev); 847 media_entity_cleanup(&mt9m001->subdev.entity); 848 849 pm_runtime_disable(&client->dev); 850 pm_runtime_set_suspended(&client->dev); 851 pm_runtime_put_noidle(&client->dev); 852 mt9m001_power_off(&client->dev); 853 854 v4l2_ctrl_handler_free(&mt9m001->hdl); 855 mutex_destroy(&mt9m001->mutex); 856 857 return 0; 858 } 859 860 static const struct i2c_device_id mt9m001_id[] = { 861 { "mt9m001", 0 }, 862 { } 863 }; 864 MODULE_DEVICE_TABLE(i2c, mt9m001_id); 865 866 static const struct dev_pm_ops mt9m001_pm_ops = { 867 SET_RUNTIME_PM_OPS(mt9m001_power_off, mt9m001_power_on, NULL) 868 }; 869 870 static const struct of_device_id mt9m001_of_match[] = { 871 { .compatible = "onnn,mt9m001", }, 872 { /* sentinel */ }, 873 }; 874 MODULE_DEVICE_TABLE(of, mt9m001_of_match); 875 876 static struct i2c_driver mt9m001_i2c_driver = { 877 .driver = { 878 .name = "mt9m001", 879 .pm = &mt9m001_pm_ops, 880 .of_match_table = mt9m001_of_match, 881 }, 882 .probe_new = mt9m001_probe, 883 .remove = mt9m001_remove, 884 .id_table = mt9m001_id, 885 }; 886 887 module_i2c_driver(mt9m001_i2c_driver); 888 889 MODULE_DESCRIPTION("Micron MT9M001 Camera driver"); 890 MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>"); 891 MODULE_LICENSE("GPL v2"); 892