xref: /linux/drivers/media/i2c/ml86v7667.c (revision 827634added7f38b7d724cab1dccdb2b004c13c3)
1 /*
2  * OKI Semiconductor ML86V7667 video decoder driver
3  *
4  * Author: Vladimir Barinov <source@cogentembedded.com>
5  * Copyright (C) 2013 Cogent Embedded, Inc.
6  * Copyright (C) 2013 Renesas Solutions Corp.
7  *
8  * This program is free software; you can redistribute  it and/or modify it
9  * under  the terms of  the GNU General  Public License as published by the
10  * Free Software Foundation;  either version 2 of the  License, or (at your
11  * option) any later version.
12  */
13 
14 #include <linux/init.h>
15 #include <linux/module.h>
16 #include <linux/i2c.h>
17 #include <linux/slab.h>
18 #include <linux/videodev2.h>
19 #include <media/v4l2-subdev.h>
20 #include <media/v4l2-device.h>
21 #include <media/v4l2-ioctl.h>
22 #include <media/v4l2-ctrls.h>
23 
24 #define DRV_NAME "ml86v7667"
25 
26 /* Subaddresses */
27 #define MRA_REG			0x00 /* Mode Register A */
28 #define MRC_REG			0x02 /* Mode Register C */
29 #define LUMC_REG		0x0C /* Luminance Control */
30 #define CLC_REG			0x10 /* Contrast level control */
31 #define SSEPL_REG		0x11 /* Sync separation level */
32 #define CHRCA_REG		0x12 /* Chrominance Control A */
33 #define ACCC_REG		0x14 /* ACC Loop filter & Chrominance control */
34 #define ACCRC_REG		0x15 /* ACC Reference level control */
35 #define HUE_REG			0x16 /* Hue control */
36 #define ADC2_REG		0x1F /* ADC Register 2 */
37 #define PLLR1_REG		0x20 /* PLL Register 1 */
38 #define STATUS_REG		0x2C /* STATUS Register */
39 
40 /* Mode Register A register bits */
41 #define MRA_OUTPUT_MODE_MASK	(3 << 6)
42 #define MRA_ITUR_BT601		(1 << 6)
43 #define MRA_ITUR_BT656		(0 << 6)
44 #define MRA_INPUT_MODE_MASK	(7 << 3)
45 #define MRA_PAL_BT601		(4 << 3)
46 #define MRA_NTSC_BT601		(0 << 3)
47 #define MRA_REGISTER_MODE	(1 << 0)
48 
49 /* Mode Register C register bits */
50 #define MRC_AUTOSELECT		(1 << 7)
51 
52 /* Luminance Control register bits */
53 #define LUMC_ONOFF_SHIFT	7
54 #define LUMC_ONOFF_MASK		(1 << 7)
55 
56 /* Contrast level control register bits */
57 #define CLC_CONTRAST_ONOFF	(1 << 7)
58 #define CLC_CONTRAST_MASK	0x0F
59 
60 /* Sync separation level register bits */
61 #define SSEPL_LUMINANCE_ONOFF	(1 << 7)
62 #define SSEPL_LUMINANCE_MASK	0x7F
63 
64 /* Chrominance Control A register bits */
65 #define CHRCA_MODE_SHIFT	6
66 #define CHRCA_MODE_MASK		(1 << 6)
67 
68 /* ACC Loop filter & Chrominance control register bits */
69 #define ACCC_CHROMA_CR_SHIFT	3
70 #define ACCC_CHROMA_CR_MASK	(7 << 3)
71 #define ACCC_CHROMA_CB_SHIFT	0
72 #define ACCC_CHROMA_CB_MASK	(7 << 0)
73 
74 /* ACC Reference level control register bits */
75 #define ACCRC_CHROMA_MASK	0xfc
76 #define ACCRC_CHROMA_SHIFT	2
77 
78 /* ADC Register 2 register bits */
79 #define ADC2_CLAMP_VOLTAGE_MASK	(7 << 1)
80 #define ADC2_CLAMP_VOLTAGE(n)	((n & 7) << 1)
81 
82 /* PLL Register 1 register bits */
83 #define PLLR1_FIXED_CLOCK	(1 << 7)
84 
85 /* STATUS Register register bits */
86 #define STATUS_HLOCK_DETECT	(1 << 3)
87 #define STATUS_NTSCPAL		(1 << 2)
88 
89 struct ml86v7667_priv {
90 	struct v4l2_subdev		sd;
91 	struct v4l2_ctrl_handler	hdl;
92 	v4l2_std_id			std;
93 };
94 
95 static inline struct ml86v7667_priv *to_ml86v7667(struct v4l2_subdev *subdev)
96 {
97 	return container_of(subdev, struct ml86v7667_priv, sd);
98 }
99 
100 static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
101 {
102 	return &container_of(ctrl->handler, struct ml86v7667_priv, hdl)->sd;
103 }
104 
105 static int ml86v7667_mask_set(struct i2c_client *client, const u8 reg,
106 			      const u8 mask, const u8 data)
107 {
108 	int val = i2c_smbus_read_byte_data(client, reg);
109 	if (val < 0)
110 		return val;
111 
112 	val = (val & ~mask) | (data & mask);
113 	return i2c_smbus_write_byte_data(client, reg, val);
114 }
115 
116 static int ml86v7667_s_ctrl(struct v4l2_ctrl *ctrl)
117 {
118 	struct v4l2_subdev *sd = to_sd(ctrl);
119 	struct i2c_client *client = v4l2_get_subdevdata(sd);
120 	int ret = -EINVAL;
121 
122 	switch (ctrl->id) {
123 	case V4L2_CID_BRIGHTNESS:
124 		ret = ml86v7667_mask_set(client, SSEPL_REG,
125 					 SSEPL_LUMINANCE_MASK, ctrl->val);
126 		break;
127 	case V4L2_CID_CONTRAST:
128 		ret = ml86v7667_mask_set(client, CLC_REG,
129 					 CLC_CONTRAST_MASK, ctrl->val);
130 		break;
131 	case V4L2_CID_CHROMA_GAIN:
132 		ret = ml86v7667_mask_set(client, ACCRC_REG, ACCRC_CHROMA_MASK,
133 					 ctrl->val << ACCRC_CHROMA_SHIFT);
134 		break;
135 	case V4L2_CID_HUE:
136 		ret = ml86v7667_mask_set(client, HUE_REG, ~0, ctrl->val);
137 		break;
138 	case V4L2_CID_RED_BALANCE:
139 		ret = ml86v7667_mask_set(client, ACCC_REG,
140 					 ACCC_CHROMA_CR_MASK,
141 					 ctrl->val << ACCC_CHROMA_CR_SHIFT);
142 		break;
143 	case V4L2_CID_BLUE_BALANCE:
144 		ret = ml86v7667_mask_set(client, ACCC_REG,
145 					 ACCC_CHROMA_CB_MASK,
146 					 ctrl->val << ACCC_CHROMA_CB_SHIFT);
147 		break;
148 	case V4L2_CID_SHARPNESS:
149 		ret = ml86v7667_mask_set(client, LUMC_REG,
150 					 LUMC_ONOFF_MASK,
151 					 ctrl->val << LUMC_ONOFF_SHIFT);
152 		break;
153 	case V4L2_CID_COLOR_KILLER:
154 		ret = ml86v7667_mask_set(client, CHRCA_REG,
155 					 CHRCA_MODE_MASK,
156 					 ctrl->val << CHRCA_MODE_SHIFT);
157 		break;
158 	}
159 
160 	return ret;
161 }
162 
163 static int ml86v7667_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
164 {
165 	struct i2c_client *client = v4l2_get_subdevdata(sd);
166 	int status;
167 
168 	status = i2c_smbus_read_byte_data(client, STATUS_REG);
169 	if (status < 0)
170 		return status;
171 
172 	if (status & STATUS_HLOCK_DETECT)
173 		*std &= status & STATUS_NTSCPAL ? V4L2_STD_625_50 : V4L2_STD_525_60;
174 	else
175 		*std = V4L2_STD_UNKNOWN;
176 
177 	return 0;
178 }
179 
180 static int ml86v7667_g_input_status(struct v4l2_subdev *sd, u32 *status)
181 {
182 	struct i2c_client *client = v4l2_get_subdevdata(sd);
183 	int status_reg;
184 
185 	status_reg = i2c_smbus_read_byte_data(client, STATUS_REG);
186 	if (status_reg < 0)
187 		return status_reg;
188 
189 	*status = status_reg & STATUS_HLOCK_DETECT ? 0 : V4L2_IN_ST_NO_SIGNAL;
190 
191 	return 0;
192 }
193 
194 static int ml86v7667_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned int index,
195 				   u32 *code)
196 {
197 	if (index > 0)
198 		return -EINVAL;
199 
200 	*code = MEDIA_BUS_FMT_YUYV8_2X8;
201 
202 	return 0;
203 }
204 
205 static int ml86v7667_mbus_fmt(struct v4l2_subdev *sd,
206 			      struct v4l2_mbus_framefmt *fmt)
207 {
208 	struct ml86v7667_priv *priv = to_ml86v7667(sd);
209 
210 	fmt->code = MEDIA_BUS_FMT_YUYV8_2X8;
211 	fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
212 	/* The top field is always transferred first by the chip */
213 	fmt->field = V4L2_FIELD_INTERLACED_TB;
214 	fmt->width = 720;
215 	fmt->height = priv->std & V4L2_STD_525_60 ? 480 : 576;
216 
217 	return 0;
218 }
219 
220 static int ml86v7667_g_mbus_config(struct v4l2_subdev *sd,
221 				   struct v4l2_mbus_config *cfg)
222 {
223 	cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING |
224 		     V4L2_MBUS_DATA_ACTIVE_HIGH;
225 	cfg->type = V4L2_MBUS_BT656;
226 
227 	return 0;
228 }
229 
230 static int ml86v7667_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
231 {
232 	struct ml86v7667_priv *priv = to_ml86v7667(sd);
233 	struct i2c_client *client = v4l2_get_subdevdata(&priv->sd);
234 	int ret;
235 	u8 mode;
236 
237 	/* PAL/NTSC ITU-R BT.601 input mode */
238 	mode = std & V4L2_STD_525_60 ? MRA_NTSC_BT601 : MRA_PAL_BT601;
239 	ret = ml86v7667_mask_set(client, MRA_REG, MRA_INPUT_MODE_MASK, mode);
240 	if (ret < 0)
241 		return ret;
242 
243 	priv->std = std;
244 
245 	return 0;
246 }
247 
248 #ifdef CONFIG_VIDEO_ADV_DEBUG
249 static int ml86v7667_g_register(struct v4l2_subdev *sd,
250 				struct v4l2_dbg_register *reg)
251 {
252 	struct i2c_client *client = v4l2_get_subdevdata(sd);
253 	int ret;
254 
255 	ret = i2c_smbus_read_byte_data(client, (u8)reg->reg);
256 	if (ret < 0)
257 		return ret;
258 
259 	reg->val = ret;
260 	reg->size = sizeof(u8);
261 
262 	return 0;
263 }
264 
265 static int ml86v7667_s_register(struct v4l2_subdev *sd,
266 				const struct v4l2_dbg_register *reg)
267 {
268 	struct i2c_client *client = v4l2_get_subdevdata(sd);
269 
270 	return i2c_smbus_write_byte_data(client, (u8)reg->reg, (u8)reg->val);
271 }
272 #endif
273 
274 static const struct v4l2_ctrl_ops ml86v7667_ctrl_ops = {
275 	.s_ctrl = ml86v7667_s_ctrl,
276 };
277 
278 static struct v4l2_subdev_video_ops ml86v7667_subdev_video_ops = {
279 	.s_std = ml86v7667_s_std,
280 	.querystd = ml86v7667_querystd,
281 	.g_input_status = ml86v7667_g_input_status,
282 	.enum_mbus_fmt = ml86v7667_enum_mbus_fmt,
283 	.try_mbus_fmt = ml86v7667_mbus_fmt,
284 	.g_mbus_fmt = ml86v7667_mbus_fmt,
285 	.s_mbus_fmt = ml86v7667_mbus_fmt,
286 	.g_mbus_config = ml86v7667_g_mbus_config,
287 };
288 
289 static struct v4l2_subdev_core_ops ml86v7667_subdev_core_ops = {
290 #ifdef CONFIG_VIDEO_ADV_DEBUG
291 	.g_register = ml86v7667_g_register,
292 	.s_register = ml86v7667_s_register,
293 #endif
294 };
295 
296 static struct v4l2_subdev_ops ml86v7667_subdev_ops = {
297 	.core = &ml86v7667_subdev_core_ops,
298 	.video = &ml86v7667_subdev_video_ops,
299 };
300 
301 static int ml86v7667_init(struct ml86v7667_priv *priv)
302 {
303 	struct i2c_client *client = v4l2_get_subdevdata(&priv->sd);
304 	int val;
305 	int ret;
306 
307 	/* BT.656-4 output mode, register mode */
308 	ret = ml86v7667_mask_set(client, MRA_REG,
309 				 MRA_OUTPUT_MODE_MASK | MRA_REGISTER_MODE,
310 				 MRA_ITUR_BT656 | MRA_REGISTER_MODE);
311 
312 	/* PLL circuit fixed clock, 32MHz */
313 	ret |= ml86v7667_mask_set(client, PLLR1_REG, PLLR1_FIXED_CLOCK,
314 				  PLLR1_FIXED_CLOCK);
315 
316 	/* ADC2 clamping voltage maximum  */
317 	ret |= ml86v7667_mask_set(client, ADC2_REG, ADC2_CLAMP_VOLTAGE_MASK,
318 				  ADC2_CLAMP_VOLTAGE(7));
319 
320 	/* enable luminance function */
321 	ret |= ml86v7667_mask_set(client, SSEPL_REG, SSEPL_LUMINANCE_ONOFF,
322 				  SSEPL_LUMINANCE_ONOFF);
323 
324 	/* enable contrast function */
325 	ret |= ml86v7667_mask_set(client, CLC_REG, CLC_CONTRAST_ONOFF, 0);
326 
327 	/*
328 	 * PAL/NTSC autodetection is enabled after reset,
329 	 * set the autodetected std in manual std mode and
330 	 * disable autodetection
331 	 */
332 	val = i2c_smbus_read_byte_data(client, STATUS_REG);
333 	if (val < 0)
334 		return val;
335 
336 	priv->std = val & STATUS_NTSCPAL ? V4L2_STD_625_50 : V4L2_STD_525_60;
337 	ret |= ml86v7667_mask_set(client, MRC_REG, MRC_AUTOSELECT, 0);
338 
339 	val = priv->std & V4L2_STD_525_60 ? MRA_NTSC_BT601 : MRA_PAL_BT601;
340 	ret |= ml86v7667_mask_set(client, MRA_REG, MRA_INPUT_MODE_MASK, val);
341 
342 	return ret;
343 }
344 
345 static int ml86v7667_probe(struct i2c_client *client,
346 			   const struct i2c_device_id *did)
347 {
348 	struct ml86v7667_priv *priv;
349 	int ret;
350 
351 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
352 		return -EIO;
353 
354 	priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
355 	if (!priv)
356 		return -ENOMEM;
357 
358 	v4l2_i2c_subdev_init(&priv->sd, client, &ml86v7667_subdev_ops);
359 
360 	v4l2_ctrl_handler_init(&priv->hdl, 8);
361 	v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
362 			  V4L2_CID_BRIGHTNESS, -64, 63, 1, 0);
363 	v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
364 			  V4L2_CID_CONTRAST, -8, 7, 1, 0);
365 	v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
366 			  V4L2_CID_CHROMA_GAIN, -32, 31, 1, 0);
367 	v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
368 			  V4L2_CID_HUE, -128, 127, 1, 0);
369 	v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
370 			  V4L2_CID_RED_BALANCE, -4, 3, 1, 0);
371 	v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
372 			  V4L2_CID_BLUE_BALANCE, -4, 3, 1, 0);
373 	v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
374 			  V4L2_CID_SHARPNESS, 0, 1, 1, 0);
375 	v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
376 			  V4L2_CID_COLOR_KILLER, 0, 1, 1, 0);
377 	priv->sd.ctrl_handler = &priv->hdl;
378 
379 	ret = priv->hdl.error;
380 	if (ret)
381 		goto cleanup;
382 
383 	v4l2_ctrl_handler_setup(&priv->hdl);
384 
385 	ret = ml86v7667_init(priv);
386 	if (ret)
387 		goto cleanup;
388 
389 	v4l_info(client, "chip found @ 0x%02x (%s)\n",
390 		 client->addr, client->adapter->name);
391 	return 0;
392 
393 cleanup:
394 	v4l2_ctrl_handler_free(&priv->hdl);
395 	v4l2_device_unregister_subdev(&priv->sd);
396 	v4l_err(client, "failed to probe @ 0x%02x (%s)\n",
397 		client->addr, client->adapter->name);
398 	return ret;
399 }
400 
401 static int ml86v7667_remove(struct i2c_client *client)
402 {
403 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
404 	struct ml86v7667_priv *priv = to_ml86v7667(sd);
405 
406 	v4l2_ctrl_handler_free(&priv->hdl);
407 	v4l2_device_unregister_subdev(&priv->sd);
408 
409 	return 0;
410 }
411 
412 static const struct i2c_device_id ml86v7667_id[] = {
413 	{DRV_NAME, 0},
414 	{},
415 };
416 MODULE_DEVICE_TABLE(i2c, ml86v7667_id);
417 
418 static struct i2c_driver ml86v7667_i2c_driver = {
419 	.driver = {
420 		.name	= DRV_NAME,
421 		.owner	= THIS_MODULE,
422 	},
423 	.probe		= ml86v7667_probe,
424 	.remove		= ml86v7667_remove,
425 	.id_table	= ml86v7667_id,
426 };
427 
428 module_i2c_driver(ml86v7667_i2c_driver);
429 
430 MODULE_DESCRIPTION("OKI Semiconductor ML86V7667 video decoder driver");
431 MODULE_AUTHOR("Vladimir Barinov");
432 MODULE_LICENSE("GPL");
433