xref: /linux/drivers/media/i2c/imx290.c (revision a06c3fad49a50d5d5eb078f93e70f4d3eca5d5a5)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Sony IMX290 CMOS Image Sensor Driver
4  *
5  * Copyright (C) 2019 FRAMOS GmbH.
6  *
7  * Copyright (C) 2019 Linaro Ltd.
8  * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
9  */
10 
11 #include <linux/clk.h>
12 #include <linux/delay.h>
13 #include <linux/gpio/consumer.h>
14 #include <linux/i2c.h>
15 #include <linux/module.h>
16 #include <linux/of.h>
17 #include <linux/pm_runtime.h>
18 #include <linux/regmap.h>
19 #include <linux/regulator/consumer.h>
20 
21 #include <asm/unaligned.h>
22 
23 #include <media/media-entity.h>
24 #include <media/v4l2-cci.h>
25 #include <media/v4l2-ctrls.h>
26 #include <media/v4l2-device.h>
27 #include <media/v4l2-event.h>
28 #include <media/v4l2-fwnode.h>
29 #include <media/v4l2-subdev.h>
30 
31 #define IMX290_STANDBY					CCI_REG8(0x3000)
32 #define IMX290_REGHOLD					CCI_REG8(0x3001)
33 #define IMX290_XMSTA					CCI_REG8(0x3002)
34 #define IMX290_ADBIT					CCI_REG8(0x3005)
35 #define IMX290_ADBIT_10BIT				(0 << 0)
36 #define IMX290_ADBIT_12BIT				(1 << 0)
37 #define IMX290_CTRL_07					CCI_REG8(0x3007)
38 #define IMX290_VREVERSE					BIT(0)
39 #define IMX290_HREVERSE					BIT(1)
40 #define IMX290_WINMODE_1080P				(0 << 4)
41 #define IMX290_WINMODE_720P				(1 << 4)
42 #define IMX290_WINMODE_CROP				(4 << 4)
43 #define IMX290_FR_FDG_SEL				CCI_REG8(0x3009)
44 #define IMX290_BLKLEVEL					CCI_REG16_LE(0x300a)
45 #define IMX290_GAIN					CCI_REG8(0x3014)
46 #define IMX290_VMAX					CCI_REG24_LE(0x3018)
47 #define IMX290_VMAX_MAX					0x3ffff
48 #define IMX290_HMAX					CCI_REG16_LE(0x301c)
49 #define IMX290_HMAX_MAX					0xffff
50 #define IMX290_SHS1					CCI_REG24_LE(0x3020)
51 #define IMX290_WINWV_OB					CCI_REG8(0x303a)
52 #define IMX290_WINPV					CCI_REG16_LE(0x303c)
53 #define IMX290_WINWV					CCI_REG16_LE(0x303e)
54 #define IMX290_WINPH					CCI_REG16_LE(0x3040)
55 #define IMX290_WINWH					CCI_REG16_LE(0x3042)
56 #define IMX290_OUT_CTRL					CCI_REG8(0x3046)
57 #define IMX290_ODBIT_10BIT				(0 << 0)
58 #define IMX290_ODBIT_12BIT				(1 << 0)
59 #define IMX290_OPORTSEL_PARALLEL			(0x0 << 4)
60 #define IMX290_OPORTSEL_LVDS_2CH			(0xd << 4)
61 #define IMX290_OPORTSEL_LVDS_4CH			(0xe << 4)
62 #define IMX290_OPORTSEL_LVDS_8CH			(0xf << 4)
63 #define IMX290_XSOUTSEL					CCI_REG8(0x304b)
64 #define IMX290_XSOUTSEL_XVSOUTSEL_HIGH			(0 << 0)
65 #define IMX290_XSOUTSEL_XVSOUTSEL_VSYNC			(2 << 0)
66 #define IMX290_XSOUTSEL_XHSOUTSEL_HIGH			(0 << 2)
67 #define IMX290_XSOUTSEL_XHSOUTSEL_HSYNC			(2 << 2)
68 #define IMX290_INCKSEL1					CCI_REG8(0x305c)
69 #define IMX290_INCKSEL2					CCI_REG8(0x305d)
70 #define IMX290_INCKSEL3					CCI_REG8(0x305e)
71 #define IMX290_INCKSEL4					CCI_REG8(0x305f)
72 #define IMX290_PGCTRL					CCI_REG8(0x308c)
73 #define IMX290_ADBIT1					CCI_REG8(0x3129)
74 #define IMX290_ADBIT1_10BIT				0x1d
75 #define IMX290_ADBIT1_12BIT				0x00
76 #define IMX290_INCKSEL5					CCI_REG8(0x315e)
77 #define IMX290_INCKSEL6					CCI_REG8(0x3164)
78 #define IMX290_ADBIT2					CCI_REG8(0x317c)
79 #define IMX290_ADBIT2_10BIT				0x12
80 #define IMX290_ADBIT2_12BIT				0x00
81 #define IMX290_CHIP_ID					CCI_REG16_LE(0x319a)
82 #define IMX290_ADBIT3					CCI_REG8(0x31ec)
83 #define IMX290_ADBIT3_10BIT				0x37
84 #define IMX290_ADBIT3_12BIT				0x0e
85 #define IMX290_REPETITION				CCI_REG8(0x3405)
86 #define IMX290_PHY_LANE_NUM				CCI_REG8(0x3407)
87 #define IMX290_OPB_SIZE_V				CCI_REG8(0x3414)
88 #define IMX290_Y_OUT_SIZE				CCI_REG16_LE(0x3418)
89 #define IMX290_CSI_DT_FMT				CCI_REG16_LE(0x3441)
90 #define IMX290_CSI_DT_FMT_RAW10				0x0a0a
91 #define IMX290_CSI_DT_FMT_RAW12				0x0c0c
92 #define IMX290_CSI_LANE_MODE				CCI_REG8(0x3443)
93 #define IMX290_EXTCK_FREQ				CCI_REG16_LE(0x3444)
94 #define IMX290_TCLKPOST					CCI_REG16_LE(0x3446)
95 #define IMX290_THSZERO					CCI_REG16_LE(0x3448)
96 #define IMX290_THSPREPARE				CCI_REG16_LE(0x344a)
97 #define IMX290_TCLKTRAIL				CCI_REG16_LE(0x344c)
98 #define IMX290_THSTRAIL					CCI_REG16_LE(0x344e)
99 #define IMX290_TCLKZERO					CCI_REG16_LE(0x3450)
100 #define IMX290_TCLKPREPARE				CCI_REG16_LE(0x3452)
101 #define IMX290_TLPX					CCI_REG16_LE(0x3454)
102 #define IMX290_X_OUT_SIZE				CCI_REG16_LE(0x3472)
103 #define IMX290_INCKSEL7					CCI_REG8(0x3480)
104 
105 #define IMX290_PGCTRL_REGEN				BIT(0)
106 #define IMX290_PGCTRL_THRU				BIT(1)
107 #define IMX290_PGCTRL_MODE(n)				((n) << 4)
108 
109 /* Number of lines by which exposure must be less than VMAX */
110 #define IMX290_EXPOSURE_OFFSET				2
111 
112 #define IMX290_PIXEL_RATE				148500000
113 
114 /*
115  * The IMX290 pixel array is organized as follows:
116  *
117  *     +------------------------------------+
118  *     |           Optical Black            |     }  Vertical effective optical black (10)
119  * +---+------------------------------------+---+
120  * |   |                                    |   | }  Effective top margin (8)
121  * |   |   +----------------------------+   |   | \
122  * |   |   |                            |   |   |  |
123  * |   |   |                            |   |   |  |
124  * |   |   |                            |   |   |  |
125  * |   |   |    Recording Pixel Area    |   |   |  | Recommended height (1080)
126  * |   |   |                            |   |   |  |
127  * |   |   |                            |   |   |  |
128  * |   |   |                            |   |   |  |
129  * |   |   +----------------------------+   |   | /
130  * |   |                                    |   | }  Effective bottom margin (9)
131  * +---+------------------------------------+---+
132  *  <-> <-> <--------------------------> <-> <->
133  *                                            \----  Ignored right margin (4)
134  *                                        \--------  Effective right margin (9)
135  *                       \-------------------------  Recommended width (1920)
136  *       \-----------------------------------------  Effective left margin (8)
137  *   \---------------------------------------------  Ignored left margin (4)
138  *
139  * The optical black lines are output over CSI-2 with a separate data type.
140  *
141  * The pixel array is meant to have 1920x1080 usable pixels after image
142  * processing in an ISP. It has 8 (9) extra active pixels usable for color
143  * processing in the ISP on the top and left (bottom and right) sides of the
144  * image. In addition, 4 additional pixels are present on the left and right
145  * sides of the image, documented as "ignored area".
146  *
147  * As far as is understood, all pixels of the pixel array (ignored area, color
148  * processing margins and recording area) can be output by the sensor.
149  */
150 
151 #define IMX290_PIXEL_ARRAY_WIDTH			1945
152 #define IMX290_PIXEL_ARRAY_HEIGHT			1097
153 #define IMX290_PIXEL_ARRAY_MARGIN_LEFT			12
154 #define IMX290_PIXEL_ARRAY_MARGIN_RIGHT			13
155 #define IMX290_PIXEL_ARRAY_MARGIN_TOP			8
156 #define IMX290_PIXEL_ARRAY_MARGIN_BOTTOM		9
157 #define IMX290_PIXEL_ARRAY_RECORDING_WIDTH		1920
158 #define IMX290_PIXEL_ARRAY_RECORDING_HEIGHT		1080
159 
160 /* Equivalent value for 16bpp */
161 #define IMX290_BLACK_LEVEL_DEFAULT			3840
162 
163 #define IMX290_NUM_SUPPLIES				3
164 
165 enum imx290_colour_variant {
166 	IMX290_VARIANT_COLOUR,
167 	IMX290_VARIANT_MONO,
168 	IMX290_VARIANT_MAX
169 };
170 
171 enum imx290_model {
172 	IMX290_MODEL_IMX290LQR,
173 	IMX290_MODEL_IMX290LLR,
174 	IMX290_MODEL_IMX327LQR,
175 };
176 
177 struct imx290_model_info {
178 	enum imx290_colour_variant colour_variant;
179 	const struct cci_reg_sequence *init_regs;
180 	size_t init_regs_num;
181 	const char *name;
182 };
183 
184 enum imx290_clk_freq {
185 	IMX290_CLK_37_125,
186 	IMX290_CLK_74_25,
187 	IMX290_NUM_CLK
188 };
189 
190 /*
191  * Clock configuration for registers INCKSEL1 to INCKSEL6.
192  */
193 struct imx290_clk_cfg {
194 	u8 incksel1;
195 	u8 incksel2;
196 	u8 incksel3;
197 	u8 incksel4;
198 	u8 incksel5;
199 	u8 incksel6;
200 };
201 
202 struct imx290_mode {
203 	u32 width;
204 	u32 height;
205 	u32 hmax_min;
206 	u32 vmax_min;
207 	u8 link_freq_index;
208 	u8 ctrl_07;
209 
210 	const struct cci_reg_sequence *data;
211 	u32 data_size;
212 
213 	const struct imx290_clk_cfg *clk_cfg;
214 };
215 
216 struct imx290_csi_cfg {
217 	u16 repetition;
218 	u16 tclkpost;
219 	u16 thszero;
220 	u16 thsprepare;
221 	u16 tclktrail;
222 	u16 thstrail;
223 	u16 tclkzero;
224 	u16 tclkprepare;
225 	u16 tlpx;
226 };
227 
228 struct imx290 {
229 	struct device *dev;
230 	struct clk *xclk;
231 	struct regmap *regmap;
232 	enum imx290_clk_freq xclk_idx;
233 	u8 nlanes;
234 	const struct imx290_model_info *model;
235 
236 	struct v4l2_subdev sd;
237 	struct media_pad pad;
238 
239 	const struct imx290_mode *current_mode;
240 
241 	struct regulator_bulk_data supplies[IMX290_NUM_SUPPLIES];
242 	struct gpio_desc *rst_gpio;
243 
244 	struct v4l2_ctrl_handler ctrls;
245 	struct v4l2_ctrl *link_freq;
246 	struct v4l2_ctrl *hblank;
247 	struct v4l2_ctrl *vblank;
248 	struct v4l2_ctrl *exposure;
249 	struct {
250 		struct v4l2_ctrl *hflip;
251 		struct v4l2_ctrl *vflip;
252 	};
253 };
254 
255 static inline struct imx290 *to_imx290(struct v4l2_subdev *_sd)
256 {
257 	return container_of(_sd, struct imx290, sd);
258 }
259 
260 /* -----------------------------------------------------------------------------
261  * Modes and formats
262  */
263 
264 static const struct cci_reg_sequence imx290_global_init_settings[] = {
265 	{ IMX290_WINWV_OB, 12 },
266 	{ IMX290_WINPH, 0 },
267 	{ IMX290_WINPV, 0 },
268 	{ IMX290_WINWH, 1948 },
269 	{ IMX290_WINWV, 1097 },
270 	{ IMX290_XSOUTSEL, IMX290_XSOUTSEL_XVSOUTSEL_VSYNC |
271 			   IMX290_XSOUTSEL_XHSOUTSEL_HSYNC },
272 	{ CCI_REG8(0x3011), 0x02 },
273 	{ CCI_REG8(0x3012), 0x64 },
274 	{ CCI_REG8(0x3013), 0x00 },
275 };
276 
277 static const struct cci_reg_sequence imx290_global_init_settings_290[] = {
278 	{ CCI_REG8(0x300f), 0x00 },
279 	{ CCI_REG8(0x3010), 0x21 },
280 	{ CCI_REG8(0x3016), 0x09 },
281 	{ CCI_REG8(0x3070), 0x02 },
282 	{ CCI_REG8(0x3071), 0x11 },
283 	{ CCI_REG8(0x309b), 0x10 },
284 	{ CCI_REG8(0x309c), 0x22 },
285 	{ CCI_REG8(0x30a2), 0x02 },
286 	{ CCI_REG8(0x30a6), 0x20 },
287 	{ CCI_REG8(0x30a8), 0x20 },
288 	{ CCI_REG8(0x30aa), 0x20 },
289 	{ CCI_REG8(0x30ac), 0x20 },
290 	{ CCI_REG8(0x30b0), 0x43 },
291 	{ CCI_REG8(0x3119), 0x9e },
292 	{ CCI_REG8(0x311c), 0x1e },
293 	{ CCI_REG8(0x311e), 0x08 },
294 	{ CCI_REG8(0x3128), 0x05 },
295 	{ CCI_REG8(0x313d), 0x83 },
296 	{ CCI_REG8(0x3150), 0x03 },
297 	{ CCI_REG8(0x317e), 0x00 },
298 	{ CCI_REG8(0x32b8), 0x50 },
299 	{ CCI_REG8(0x32b9), 0x10 },
300 	{ CCI_REG8(0x32ba), 0x00 },
301 	{ CCI_REG8(0x32bb), 0x04 },
302 	{ CCI_REG8(0x32c8), 0x50 },
303 	{ CCI_REG8(0x32c9), 0x10 },
304 	{ CCI_REG8(0x32ca), 0x00 },
305 	{ CCI_REG8(0x32cb), 0x04 },
306 	{ CCI_REG8(0x332c), 0xd3 },
307 	{ CCI_REG8(0x332d), 0x10 },
308 	{ CCI_REG8(0x332e), 0x0d },
309 	{ CCI_REG8(0x3358), 0x06 },
310 	{ CCI_REG8(0x3359), 0xe1 },
311 	{ CCI_REG8(0x335a), 0x11 },
312 	{ CCI_REG8(0x3360), 0x1e },
313 	{ CCI_REG8(0x3361), 0x61 },
314 	{ CCI_REG8(0x3362), 0x10 },
315 	{ CCI_REG8(0x33b0), 0x50 },
316 	{ CCI_REG8(0x33b2), 0x1a },
317 	{ CCI_REG8(0x33b3), 0x04 },
318 };
319 
320 #define IMX290_NUM_CLK_REGS	2
321 static const struct cci_reg_sequence xclk_regs[][IMX290_NUM_CLK_REGS] = {
322 	[IMX290_CLK_37_125] = {
323 		{ IMX290_EXTCK_FREQ, (37125 * 256) / 1000 },
324 		{ IMX290_INCKSEL7, 0x49 },
325 	},
326 	[IMX290_CLK_74_25] = {
327 		{ IMX290_EXTCK_FREQ, (74250 * 256) / 1000 },
328 		{ IMX290_INCKSEL7, 0x92 },
329 	},
330 };
331 
332 static const struct cci_reg_sequence imx290_global_init_settings_327[] = {
333 	{ CCI_REG8(0x309e), 0x4A },
334 	{ CCI_REG8(0x309f), 0x4A },
335 	{ CCI_REG8(0x313b), 0x61 },
336 };
337 
338 static const struct cci_reg_sequence imx290_1080p_settings[] = {
339 	/* mode settings */
340 	{ IMX290_WINWV_OB, 12 },
341 	{ IMX290_OPB_SIZE_V, 10 },
342 	{ IMX290_X_OUT_SIZE, 1920 },
343 	{ IMX290_Y_OUT_SIZE, 1080 },
344 };
345 
346 static const struct cci_reg_sequence imx290_720p_settings[] = {
347 	/* mode settings */
348 	{ IMX290_WINWV_OB, 6 },
349 	{ IMX290_OPB_SIZE_V, 4 },
350 	{ IMX290_X_OUT_SIZE, 1280 },
351 	{ IMX290_Y_OUT_SIZE, 720 },
352 };
353 
354 static const struct cci_reg_sequence imx290_10bit_settings[] = {
355 	{ IMX290_ADBIT, IMX290_ADBIT_10BIT },
356 	{ IMX290_OUT_CTRL, IMX290_ODBIT_10BIT },
357 	{ IMX290_ADBIT1, IMX290_ADBIT1_10BIT },
358 	{ IMX290_ADBIT2, IMX290_ADBIT2_10BIT },
359 	{ IMX290_ADBIT3, IMX290_ADBIT3_10BIT },
360 	{ IMX290_CSI_DT_FMT, IMX290_CSI_DT_FMT_RAW10 },
361 };
362 
363 static const struct cci_reg_sequence imx290_12bit_settings[] = {
364 	{ IMX290_ADBIT, IMX290_ADBIT_12BIT },
365 	{ IMX290_OUT_CTRL, IMX290_ODBIT_12BIT },
366 	{ IMX290_ADBIT1, IMX290_ADBIT1_12BIT },
367 	{ IMX290_ADBIT2, IMX290_ADBIT2_12BIT },
368 	{ IMX290_ADBIT3, IMX290_ADBIT3_12BIT },
369 	{ IMX290_CSI_DT_FMT, IMX290_CSI_DT_FMT_RAW12 },
370 };
371 
372 static const struct imx290_csi_cfg imx290_csi_222_75mhz = {
373 	/* 222.75MHz or 445.5Mbit/s per lane */
374 	.repetition = 0x10,
375 	.tclkpost = 87,
376 	.thszero = 55,
377 	.thsprepare = 31,
378 	.tclktrail = 31,
379 	.thstrail = 31,
380 	.tclkzero = 119,
381 	.tclkprepare = 31,
382 	.tlpx = 23,
383 };
384 
385 static const struct imx290_csi_cfg imx290_csi_445_5mhz = {
386 	/* 445.5MHz or 891Mbit/s per lane */
387 	.repetition = 0x00,
388 	.tclkpost = 119,
389 	.thszero = 103,
390 	.thsprepare = 71,
391 	.tclktrail = 55,
392 	.thstrail = 63,
393 	.tclkzero = 255,
394 	.tclkprepare = 63,
395 	.tlpx = 55,
396 };
397 
398 static const struct imx290_csi_cfg imx290_csi_148_5mhz = {
399 	/* 148.5MHz or 297Mbit/s per lane */
400 	.repetition = 0x10,
401 	.tclkpost = 79,
402 	.thszero = 47,
403 	.thsprepare = 23,
404 	.tclktrail = 23,
405 	.thstrail = 23,
406 	.tclkzero = 87,
407 	.tclkprepare = 23,
408 	.tlpx = 23,
409 };
410 
411 static const struct imx290_csi_cfg imx290_csi_297mhz = {
412 	/* 297MHz or 594Mbit/s per lane */
413 	.repetition = 0x00,
414 	.tclkpost = 103,
415 	.thszero = 87,
416 	.thsprepare = 47,
417 	.tclktrail = 39,
418 	.thstrail = 47,
419 	.tclkzero = 191,
420 	.tclkprepare = 47,
421 	.tlpx = 39,
422 };
423 
424 /* supported link frequencies */
425 #define FREQ_INDEX_1080P	0
426 #define FREQ_INDEX_720P		1
427 static const s64 imx290_link_freq_2lanes[] = {
428 	[FREQ_INDEX_1080P] = 445500000,
429 	[FREQ_INDEX_720P] = 297000000,
430 };
431 
432 static const s64 imx290_link_freq_4lanes[] = {
433 	[FREQ_INDEX_1080P] = 222750000,
434 	[FREQ_INDEX_720P] = 148500000,
435 };
436 
437 /*
438  * In this function and in the similar ones below We rely on imx290_probe()
439  * to ensure that nlanes is either 2 or 4.
440  */
441 static inline const s64 *imx290_link_freqs_ptr(const struct imx290 *imx290)
442 {
443 	if (imx290->nlanes == 2)
444 		return imx290_link_freq_2lanes;
445 	else
446 		return imx290_link_freq_4lanes;
447 }
448 
449 static inline int imx290_link_freqs_num(const struct imx290 *imx290)
450 {
451 	if (imx290->nlanes == 2)
452 		return ARRAY_SIZE(imx290_link_freq_2lanes);
453 	else
454 		return ARRAY_SIZE(imx290_link_freq_4lanes);
455 }
456 
457 static const struct imx290_clk_cfg imx290_1080p_clock_config[] = {
458 	[IMX290_CLK_37_125] = {
459 		/* 37.125MHz clock config */
460 		.incksel1 = 0x18,
461 		.incksel2 = 0x03,
462 		.incksel3 = 0x20,
463 		.incksel4 = 0x01,
464 		.incksel5 = 0x1a,
465 		.incksel6 = 0x1a,
466 	},
467 	[IMX290_CLK_74_25] = {
468 		/* 74.25MHz clock config */
469 		.incksel1 = 0x0c,
470 		.incksel2 = 0x03,
471 		.incksel3 = 0x10,
472 		.incksel4 = 0x01,
473 		.incksel5 = 0x1b,
474 		.incksel6 = 0x1b,
475 	},
476 };
477 
478 static const struct imx290_clk_cfg imx290_720p_clock_config[] = {
479 	[IMX290_CLK_37_125] = {
480 		/* 37.125MHz clock config */
481 		.incksel1 = 0x20,
482 		.incksel2 = 0x00,
483 		.incksel3 = 0x20,
484 		.incksel4 = 0x01,
485 		.incksel5 = 0x1a,
486 		.incksel6 = 0x1a,
487 	},
488 	[IMX290_CLK_74_25] = {
489 		/* 74.25MHz clock config */
490 		.incksel1 = 0x10,
491 		.incksel2 = 0x00,
492 		.incksel3 = 0x10,
493 		.incksel4 = 0x01,
494 		.incksel5 = 0x1b,
495 		.incksel6 = 0x1b,
496 	},
497 };
498 
499 /* Mode configs */
500 static const struct imx290_mode imx290_modes_2lanes[] = {
501 	{
502 		.width = 1920,
503 		.height = 1080,
504 		.hmax_min = 2200,
505 		.vmax_min = 1125,
506 		.link_freq_index = FREQ_INDEX_1080P,
507 		.ctrl_07 = IMX290_WINMODE_1080P,
508 		.data = imx290_1080p_settings,
509 		.data_size = ARRAY_SIZE(imx290_1080p_settings),
510 		.clk_cfg = imx290_1080p_clock_config,
511 	},
512 	{
513 		.width = 1280,
514 		.height = 720,
515 		.hmax_min = 3300,
516 		.vmax_min = 750,
517 		.link_freq_index = FREQ_INDEX_720P,
518 		.ctrl_07 = IMX290_WINMODE_720P,
519 		.data = imx290_720p_settings,
520 		.data_size = ARRAY_SIZE(imx290_720p_settings),
521 		.clk_cfg = imx290_720p_clock_config,
522 	},
523 };
524 
525 static const struct imx290_mode imx290_modes_4lanes[] = {
526 	{
527 		.width = 1920,
528 		.height = 1080,
529 		.hmax_min = 2200,
530 		.vmax_min = 1125,
531 		.link_freq_index = FREQ_INDEX_1080P,
532 		.ctrl_07 = IMX290_WINMODE_1080P,
533 		.data = imx290_1080p_settings,
534 		.data_size = ARRAY_SIZE(imx290_1080p_settings),
535 		.clk_cfg = imx290_1080p_clock_config,
536 	},
537 	{
538 		.width = 1280,
539 		.height = 720,
540 		.hmax_min = 3300,
541 		.vmax_min = 750,
542 		.link_freq_index = FREQ_INDEX_720P,
543 		.ctrl_07 = IMX290_WINMODE_720P,
544 		.data = imx290_720p_settings,
545 		.data_size = ARRAY_SIZE(imx290_720p_settings),
546 		.clk_cfg = imx290_720p_clock_config,
547 	},
548 };
549 
550 static inline const struct imx290_mode *imx290_modes_ptr(const struct imx290 *imx290)
551 {
552 	if (imx290->nlanes == 2)
553 		return imx290_modes_2lanes;
554 	else
555 		return imx290_modes_4lanes;
556 }
557 
558 static inline int imx290_modes_num(const struct imx290 *imx290)
559 {
560 	if (imx290->nlanes == 2)
561 		return ARRAY_SIZE(imx290_modes_2lanes);
562 	else
563 		return ARRAY_SIZE(imx290_modes_4lanes);
564 }
565 
566 struct imx290_format_info {
567 	u32 code[IMX290_VARIANT_MAX];
568 	u8 bpp;
569 	const struct cci_reg_sequence *regs;
570 	unsigned int num_regs;
571 };
572 
573 static const struct imx290_format_info imx290_formats[] = {
574 	{
575 		.code = {
576 			[IMX290_VARIANT_COLOUR] = MEDIA_BUS_FMT_SRGGB10_1X10,
577 			[IMX290_VARIANT_MONO] = MEDIA_BUS_FMT_Y10_1X10
578 		},
579 		.bpp = 10,
580 		.regs = imx290_10bit_settings,
581 		.num_regs = ARRAY_SIZE(imx290_10bit_settings),
582 	}, {
583 		.code = {
584 			[IMX290_VARIANT_COLOUR] = MEDIA_BUS_FMT_SRGGB12_1X12,
585 			[IMX290_VARIANT_MONO] = MEDIA_BUS_FMT_Y12_1X12
586 		},
587 		.bpp = 12,
588 		.regs = imx290_12bit_settings,
589 		.num_regs = ARRAY_SIZE(imx290_12bit_settings),
590 	}
591 };
592 
593 static const struct imx290_format_info *
594 imx290_format_info(const struct imx290 *imx290, u32 code)
595 {
596 	unsigned int i;
597 
598 	for (i = 0; i < ARRAY_SIZE(imx290_formats); ++i) {
599 		const struct imx290_format_info *info = &imx290_formats[i];
600 
601 		if (info->code[imx290->model->colour_variant] == code)
602 			return info;
603 	}
604 
605 	return NULL;
606 }
607 
608 static int imx290_set_register_array(struct imx290 *imx290,
609 				     const struct cci_reg_sequence *settings,
610 				     unsigned int num_settings)
611 {
612 	int ret;
613 
614 	ret = cci_multi_reg_write(imx290->regmap, settings, num_settings, NULL);
615 	if (ret < 0)
616 		return ret;
617 
618 	/* Provide 10ms settle time */
619 	usleep_range(10000, 11000);
620 
621 	return 0;
622 }
623 
624 static int imx290_set_clock(struct imx290 *imx290)
625 {
626 	const struct imx290_mode *mode = imx290->current_mode;
627 	enum imx290_clk_freq clk_idx = imx290->xclk_idx;
628 	const struct imx290_clk_cfg *clk_cfg = &mode->clk_cfg[clk_idx];
629 	int ret;
630 
631 	ret = imx290_set_register_array(imx290, xclk_regs[clk_idx],
632 					IMX290_NUM_CLK_REGS);
633 
634 	cci_write(imx290->regmap, IMX290_INCKSEL1, clk_cfg->incksel1, &ret);
635 	cci_write(imx290->regmap, IMX290_INCKSEL2, clk_cfg->incksel2, &ret);
636 	cci_write(imx290->regmap, IMX290_INCKSEL3, clk_cfg->incksel3, &ret);
637 	cci_write(imx290->regmap, IMX290_INCKSEL4, clk_cfg->incksel4, &ret);
638 	cci_write(imx290->regmap, IMX290_INCKSEL5, clk_cfg->incksel5, &ret);
639 	cci_write(imx290->regmap, IMX290_INCKSEL6, clk_cfg->incksel6, &ret);
640 
641 	return ret;
642 }
643 
644 static int imx290_set_data_lanes(struct imx290 *imx290)
645 {
646 	int ret = 0;
647 
648 	cci_write(imx290->regmap, IMX290_PHY_LANE_NUM, imx290->nlanes - 1,
649 		  &ret);
650 	cci_write(imx290->regmap, IMX290_CSI_LANE_MODE, imx290->nlanes - 1,
651 		  &ret);
652 	cci_write(imx290->regmap, IMX290_FR_FDG_SEL, 0x01, &ret);
653 
654 	return ret;
655 }
656 
657 static int imx290_set_black_level(struct imx290 *imx290,
658 				  const struct v4l2_mbus_framefmt *format,
659 				  unsigned int black_level, int *err)
660 {
661 	unsigned int bpp = imx290_format_info(imx290, format->code)->bpp;
662 
663 	return cci_write(imx290->regmap, IMX290_BLKLEVEL,
664 			 black_level >> (16 - bpp), err);
665 }
666 
667 static int imx290_set_csi_config(struct imx290 *imx290)
668 {
669 	const s64 *link_freqs = imx290_link_freqs_ptr(imx290);
670 	const struct imx290_csi_cfg *csi_cfg;
671 	int ret = 0;
672 
673 	switch (link_freqs[imx290->current_mode->link_freq_index]) {
674 	case 445500000:
675 		csi_cfg = &imx290_csi_445_5mhz;
676 		break;
677 	case 297000000:
678 		csi_cfg = &imx290_csi_297mhz;
679 		break;
680 	case 222750000:
681 		csi_cfg = &imx290_csi_222_75mhz;
682 		break;
683 	case 148500000:
684 		csi_cfg = &imx290_csi_148_5mhz;
685 		break;
686 	default:
687 		return -EINVAL;
688 	}
689 
690 	cci_write(imx290->regmap, IMX290_REPETITION, csi_cfg->repetition, &ret);
691 	cci_write(imx290->regmap, IMX290_TCLKPOST, csi_cfg->tclkpost, &ret);
692 	cci_write(imx290->regmap, IMX290_THSZERO, csi_cfg->thszero, &ret);
693 	cci_write(imx290->regmap, IMX290_THSPREPARE, csi_cfg->thsprepare, &ret);
694 	cci_write(imx290->regmap, IMX290_TCLKTRAIL, csi_cfg->tclktrail, &ret);
695 	cci_write(imx290->regmap, IMX290_THSTRAIL, csi_cfg->thstrail, &ret);
696 	cci_write(imx290->regmap, IMX290_TCLKZERO, csi_cfg->tclkzero, &ret);
697 	cci_write(imx290->regmap, IMX290_TCLKPREPARE, csi_cfg->tclkprepare,
698 		  &ret);
699 	cci_write(imx290->regmap, IMX290_TLPX, csi_cfg->tlpx, &ret);
700 
701 	return ret;
702 }
703 
704 static int imx290_setup_format(struct imx290 *imx290,
705 			       const struct v4l2_mbus_framefmt *format)
706 {
707 	const struct imx290_format_info *info;
708 	int ret;
709 
710 	info = imx290_format_info(imx290, format->code);
711 
712 	ret = imx290_set_register_array(imx290, info->regs, info->num_regs);
713 	if (ret < 0) {
714 		dev_err(imx290->dev, "Could not set format registers\n");
715 		return ret;
716 	}
717 
718 	return imx290_set_black_level(imx290, format,
719 				      IMX290_BLACK_LEVEL_DEFAULT, &ret);
720 }
721 
722 /* ----------------------------------------------------------------------------
723  * Controls
724  */
725 static void imx290_exposure_update(struct imx290 *imx290,
726 				   const struct imx290_mode *mode)
727 {
728 	unsigned int exposure_max;
729 
730 	exposure_max = imx290->vblank->val + mode->height -
731 		       IMX290_EXPOSURE_OFFSET;
732 	__v4l2_ctrl_modify_range(imx290->exposure, 1, exposure_max, 1,
733 				 exposure_max);
734 }
735 
736 static int imx290_set_ctrl(struct v4l2_ctrl *ctrl)
737 {
738 	struct imx290 *imx290 = container_of(ctrl->handler,
739 					     struct imx290, ctrls);
740 	const struct v4l2_mbus_framefmt *format;
741 	struct v4l2_subdev_state *state;
742 	int ret = 0, vmax;
743 
744 	/*
745 	 * Return immediately for controls that don't need to be applied to the
746 	 * device.
747 	 */
748 	if (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY)
749 		return 0;
750 
751 	if (ctrl->id == V4L2_CID_VBLANK) {
752 		/* Changing vblank changes the allowed range for exposure. */
753 		imx290_exposure_update(imx290, imx290->current_mode);
754 	}
755 
756 	/* V4L2 controls values will be applied only when power is already up */
757 	if (!pm_runtime_get_if_in_use(imx290->dev))
758 		return 0;
759 
760 	state = v4l2_subdev_get_locked_active_state(&imx290->sd);
761 	format = v4l2_subdev_state_get_format(state, 0);
762 
763 	switch (ctrl->id) {
764 	case V4L2_CID_ANALOGUE_GAIN:
765 		ret = cci_write(imx290->regmap, IMX290_GAIN, ctrl->val, NULL);
766 		break;
767 
768 	case V4L2_CID_VBLANK:
769 		ret = cci_write(imx290->regmap, IMX290_VMAX,
770 				ctrl->val + imx290->current_mode->height, NULL);
771 		/*
772 		 * Due to the way that exposure is programmed in this sensor in
773 		 * relation to VMAX, we have to reprogramme it whenever VMAX is
774 		 * changed.
775 		 * Update ctrl so that the V4L2_CID_EXPOSURE case can refer to
776 		 * it.
777 		 */
778 		ctrl = imx290->exposure;
779 		fallthrough;
780 	case V4L2_CID_EXPOSURE:
781 		vmax = imx290->vblank->val + imx290->current_mode->height;
782 		ret = cci_write(imx290->regmap, IMX290_SHS1,
783 				vmax - ctrl->val - 1, NULL);
784 		break;
785 
786 	case V4L2_CID_TEST_PATTERN:
787 		if (ctrl->val) {
788 			imx290_set_black_level(imx290, format, 0, &ret);
789 			usleep_range(10000, 11000);
790 			cci_write(imx290->regmap, IMX290_PGCTRL,
791 				  (u8)(IMX290_PGCTRL_REGEN |
792 				       IMX290_PGCTRL_THRU |
793 				       IMX290_PGCTRL_MODE(ctrl->val)), &ret);
794 		} else {
795 			cci_write(imx290->regmap, IMX290_PGCTRL, 0x00, &ret);
796 			usleep_range(10000, 11000);
797 			imx290_set_black_level(imx290, format,
798 					       IMX290_BLACK_LEVEL_DEFAULT, &ret);
799 		}
800 		break;
801 
802 	case V4L2_CID_HBLANK:
803 		ret = cci_write(imx290->regmap, IMX290_HMAX,
804 				ctrl->val + imx290->current_mode->width, NULL);
805 		break;
806 
807 	case V4L2_CID_HFLIP:
808 	case V4L2_CID_VFLIP:
809 	{
810 		u32 reg;
811 
812 		reg = imx290->current_mode->ctrl_07;
813 		if (imx290->hflip->val)
814 			reg |= IMX290_HREVERSE;
815 		if (imx290->vflip->val)
816 			reg |= IMX290_VREVERSE;
817 		ret = cci_write(imx290->regmap, IMX290_CTRL_07, reg, NULL);
818 		break;
819 	}
820 
821 	default:
822 		ret = -EINVAL;
823 		break;
824 	}
825 
826 	pm_runtime_mark_last_busy(imx290->dev);
827 	pm_runtime_put_autosuspend(imx290->dev);
828 
829 	return ret;
830 }
831 
832 static const struct v4l2_ctrl_ops imx290_ctrl_ops = {
833 	.s_ctrl = imx290_set_ctrl,
834 };
835 
836 static const char * const imx290_test_pattern_menu[] = {
837 	"Disabled",
838 	"Sequence Pattern 1",
839 	"Horizontal Color-bar Chart",
840 	"Vertical Color-bar Chart",
841 	"Sequence Pattern 2",
842 	"Gradation Pattern 1",
843 	"Gradation Pattern 2",
844 	"000/555h Toggle Pattern",
845 };
846 
847 static void imx290_ctrl_update(struct imx290 *imx290,
848 			       const struct imx290_mode *mode)
849 {
850 	unsigned int hblank_min = mode->hmax_min - mode->width;
851 	unsigned int hblank_max = IMX290_HMAX_MAX - mode->width;
852 	unsigned int vblank_min = mode->vmax_min - mode->height;
853 	unsigned int vblank_max = IMX290_VMAX_MAX - mode->height;
854 
855 	__v4l2_ctrl_s_ctrl(imx290->link_freq, mode->link_freq_index);
856 
857 	__v4l2_ctrl_modify_range(imx290->hblank, hblank_min, hblank_max, 1,
858 				 hblank_min);
859 	__v4l2_ctrl_modify_range(imx290->vblank, vblank_min, vblank_max, 1,
860 				 vblank_min);
861 }
862 
863 static int imx290_ctrl_init(struct imx290 *imx290)
864 {
865 	struct v4l2_fwnode_device_properties props;
866 	int ret;
867 
868 	ret = v4l2_fwnode_device_parse(imx290->dev, &props);
869 	if (ret < 0)
870 		return ret;
871 
872 	v4l2_ctrl_handler_init(&imx290->ctrls, 11);
873 
874 	/*
875 	 * The sensor has an analog gain and a digital gain, both controlled
876 	 * through a single gain value, expressed in 0.3dB increments. Values
877 	 * from 0.0dB (0) to 30.0dB (100) apply analog gain only, higher values
878 	 * up to 72.0dB (240) add further digital gain. Limit the range to
879 	 * analog gain only, support for digital gain can be added separately
880 	 * if needed.
881 	 *
882 	 * The IMX327 and IMX462 are largely compatible with the IMX290, but
883 	 * have an analog gain range of 0.0dB to 29.4dB and 42dB of digital
884 	 * gain. When support for those sensors gets added to the driver, the
885 	 * gain control should be adjusted accordingly.
886 	 */
887 	v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
888 			  V4L2_CID_ANALOGUE_GAIN, 0, 100, 1, 0);
889 
890 	/*
891 	 * Correct range will be determined through imx290_ctrl_update setting
892 	 * V4L2_CID_VBLANK.
893 	 */
894 	imx290->exposure = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
895 					     V4L2_CID_EXPOSURE, 1, 65535, 1,
896 					     65535);
897 
898 	/*
899 	 * Set the link frequency, pixel rate, horizontal blanking and vertical
900 	 * blanking to hardcoded values, they will be updated by
901 	 * imx290_ctrl_update().
902 	 */
903 	imx290->link_freq =
904 		v4l2_ctrl_new_int_menu(&imx290->ctrls, &imx290_ctrl_ops,
905 				       V4L2_CID_LINK_FREQ,
906 				       imx290_link_freqs_num(imx290) - 1, 0,
907 				       imx290_link_freqs_ptr(imx290));
908 	if (imx290->link_freq)
909 		imx290->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
910 
911 	v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops, V4L2_CID_PIXEL_RATE,
912 			  IMX290_PIXEL_RATE, IMX290_PIXEL_RATE, 1,
913 			  IMX290_PIXEL_RATE);
914 
915 	v4l2_ctrl_new_std_menu_items(&imx290->ctrls, &imx290_ctrl_ops,
916 				     V4L2_CID_TEST_PATTERN,
917 				     ARRAY_SIZE(imx290_test_pattern_menu) - 1,
918 				     0, 0, imx290_test_pattern_menu);
919 
920 	/*
921 	 * Actual range will be set from imx290_ctrl_update later in the probe.
922 	 */
923 	imx290->hblank = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
924 					   V4L2_CID_HBLANK, 1, 1, 1, 1);
925 
926 	imx290->vblank = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
927 					   V4L2_CID_VBLANK, 1, 1, 1, 1);
928 
929 	imx290->hflip = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
930 					  V4L2_CID_HFLIP, 0, 1, 1, 0);
931 	imx290->vflip = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
932 					  V4L2_CID_VFLIP, 0, 1, 1, 0);
933 	v4l2_ctrl_cluster(2, &imx290->hflip);
934 
935 	v4l2_ctrl_new_fwnode_properties(&imx290->ctrls, &imx290_ctrl_ops,
936 					&props);
937 
938 	imx290->sd.ctrl_handler = &imx290->ctrls;
939 
940 	if (imx290->ctrls.error) {
941 		ret = imx290->ctrls.error;
942 		v4l2_ctrl_handler_free(&imx290->ctrls);
943 		return ret;
944 	}
945 
946 	return 0;
947 }
948 
949 /* ----------------------------------------------------------------------------
950  * Subdev operations
951  */
952 
953 /* Start streaming */
954 static int imx290_start_streaming(struct imx290 *imx290,
955 				  struct v4l2_subdev_state *state)
956 {
957 	const struct v4l2_mbus_framefmt *format;
958 	int ret;
959 
960 	/* Set init register settings */
961 	ret = imx290_set_register_array(imx290, imx290_global_init_settings,
962 					ARRAY_SIZE(imx290_global_init_settings));
963 	if (ret < 0) {
964 		dev_err(imx290->dev, "Could not set init registers\n");
965 		return ret;
966 	}
967 
968 	/* Set mdel specific init register settings */
969 	ret = imx290_set_register_array(imx290, imx290->model->init_regs,
970 					imx290->model->init_regs_num);
971 	if (ret < 0) {
972 		dev_err(imx290->dev, "Could not set model specific init registers\n");
973 		return ret;
974 	}
975 
976 	/* Set clock parameters based on mode and xclk */
977 	ret = imx290_set_clock(imx290);
978 	if (ret < 0) {
979 		dev_err(imx290->dev, "Could not set clocks - %d\n", ret);
980 		return ret;
981 	}
982 
983 	/* Set data lane count */
984 	ret = imx290_set_data_lanes(imx290);
985 	if (ret < 0) {
986 		dev_err(imx290->dev, "Could not set data lanes - %d\n", ret);
987 		return ret;
988 	}
989 
990 	ret = imx290_set_csi_config(imx290);
991 	if (ret < 0) {
992 		dev_err(imx290->dev, "Could not set csi cfg - %d\n", ret);
993 		return ret;
994 	}
995 
996 	/* Apply the register values related to current frame format */
997 	format = v4l2_subdev_state_get_format(state, 0);
998 	ret = imx290_setup_format(imx290, format);
999 	if (ret < 0) {
1000 		dev_err(imx290->dev, "Could not set frame format - %d\n", ret);
1001 		return ret;
1002 	}
1003 
1004 	/* Apply default values of current mode */
1005 	ret = imx290_set_register_array(imx290, imx290->current_mode->data,
1006 					imx290->current_mode->data_size);
1007 	if (ret < 0) {
1008 		dev_err(imx290->dev, "Could not set current mode - %d\n", ret);
1009 		return ret;
1010 	}
1011 
1012 	/* Apply customized values from user */
1013 	ret = __v4l2_ctrl_handler_setup(imx290->sd.ctrl_handler);
1014 	if (ret) {
1015 		dev_err(imx290->dev, "Could not sync v4l2 controls - %d\n", ret);
1016 		return ret;
1017 	}
1018 
1019 	cci_write(imx290->regmap, IMX290_STANDBY, 0x00, &ret);
1020 
1021 	msleep(30);
1022 
1023 	/* Start streaming */
1024 	return cci_write(imx290->regmap, IMX290_XMSTA, 0x00, &ret);
1025 }
1026 
1027 /* Stop streaming */
1028 static int imx290_stop_streaming(struct imx290 *imx290)
1029 {
1030 	int ret = 0;
1031 
1032 	cci_write(imx290->regmap, IMX290_STANDBY, 0x01, &ret);
1033 
1034 	msleep(30);
1035 
1036 	return cci_write(imx290->regmap, IMX290_XMSTA, 0x01, &ret);
1037 }
1038 
1039 static int imx290_set_stream(struct v4l2_subdev *sd, int enable)
1040 {
1041 	struct imx290 *imx290 = to_imx290(sd);
1042 	struct v4l2_subdev_state *state;
1043 	int ret = 0;
1044 
1045 	state = v4l2_subdev_lock_and_get_active_state(sd);
1046 
1047 	if (enable) {
1048 		ret = pm_runtime_resume_and_get(imx290->dev);
1049 		if (ret < 0)
1050 			goto unlock;
1051 
1052 		ret = imx290_start_streaming(imx290, state);
1053 		if (ret) {
1054 			dev_err(imx290->dev, "Start stream failed\n");
1055 			pm_runtime_put_sync(imx290->dev);
1056 			goto unlock;
1057 		}
1058 	} else {
1059 		imx290_stop_streaming(imx290);
1060 		pm_runtime_mark_last_busy(imx290->dev);
1061 		pm_runtime_put_autosuspend(imx290->dev);
1062 	}
1063 
1064 	/*
1065 	 * vflip and hflip should not be changed during streaming as the sensor
1066 	 * will produce an invalid frame.
1067 	 */
1068 	__v4l2_ctrl_grab(imx290->vflip, enable);
1069 	__v4l2_ctrl_grab(imx290->hflip, enable);
1070 
1071 unlock:
1072 	v4l2_subdev_unlock_state(state);
1073 	return ret;
1074 }
1075 
1076 static int imx290_enum_mbus_code(struct v4l2_subdev *sd,
1077 				 struct v4l2_subdev_state *sd_state,
1078 				 struct v4l2_subdev_mbus_code_enum *code)
1079 {
1080 	const struct imx290 *imx290 = to_imx290(sd);
1081 
1082 	if (code->index >= ARRAY_SIZE(imx290_formats))
1083 		return -EINVAL;
1084 
1085 	code->code = imx290_formats[code->index].code[imx290->model->colour_variant];
1086 
1087 	return 0;
1088 }
1089 
1090 static int imx290_enum_frame_size(struct v4l2_subdev *sd,
1091 				  struct v4l2_subdev_state *sd_state,
1092 				  struct v4l2_subdev_frame_size_enum *fse)
1093 {
1094 	const struct imx290 *imx290 = to_imx290(sd);
1095 	const struct imx290_mode *imx290_modes = imx290_modes_ptr(imx290);
1096 
1097 	if (!imx290_format_info(imx290, fse->code))
1098 		return -EINVAL;
1099 
1100 	if (fse->index >= imx290_modes_num(imx290))
1101 		return -EINVAL;
1102 
1103 	fse->min_width = imx290_modes[fse->index].width;
1104 	fse->max_width = imx290_modes[fse->index].width;
1105 	fse->min_height = imx290_modes[fse->index].height;
1106 	fse->max_height = imx290_modes[fse->index].height;
1107 
1108 	return 0;
1109 }
1110 
1111 static int imx290_set_fmt(struct v4l2_subdev *sd,
1112 			  struct v4l2_subdev_state *sd_state,
1113 			  struct v4l2_subdev_format *fmt)
1114 {
1115 	struct imx290 *imx290 = to_imx290(sd);
1116 	const struct imx290_mode *mode;
1117 	struct v4l2_mbus_framefmt *format;
1118 
1119 	mode = v4l2_find_nearest_size(imx290_modes_ptr(imx290),
1120 				      imx290_modes_num(imx290), width, height,
1121 				      fmt->format.width, fmt->format.height);
1122 
1123 	fmt->format.width = mode->width;
1124 	fmt->format.height = mode->height;
1125 
1126 	if (!imx290_format_info(imx290, fmt->format.code))
1127 		fmt->format.code = imx290_formats[0].code[imx290->model->colour_variant];
1128 
1129 	fmt->format.field = V4L2_FIELD_NONE;
1130 	fmt->format.colorspace = V4L2_COLORSPACE_RAW;
1131 	fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_601;
1132 	fmt->format.quantization = V4L2_QUANTIZATION_FULL_RANGE;
1133 	fmt->format.xfer_func = V4L2_XFER_FUNC_NONE;
1134 
1135 	format = v4l2_subdev_state_get_format(sd_state, 0);
1136 
1137 	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
1138 		imx290->current_mode = mode;
1139 
1140 		imx290_ctrl_update(imx290, mode);
1141 		imx290_exposure_update(imx290, mode);
1142 	}
1143 
1144 	*format = fmt->format;
1145 
1146 	return 0;
1147 }
1148 
1149 static int imx290_get_selection(struct v4l2_subdev *sd,
1150 				struct v4l2_subdev_state *sd_state,
1151 				struct v4l2_subdev_selection *sel)
1152 {
1153 	struct imx290 *imx290 = to_imx290(sd);
1154 	struct v4l2_mbus_framefmt *format;
1155 
1156 	switch (sel->target) {
1157 	case V4L2_SEL_TGT_CROP: {
1158 		format = v4l2_subdev_state_get_format(sd_state, 0);
1159 
1160 		/*
1161 		 * The sensor moves the readout by 1 pixel based on flips to
1162 		 * keep the Bayer order the same.
1163 		 */
1164 		sel->r.top = IMX290_PIXEL_ARRAY_MARGIN_TOP
1165 			   + (IMX290_PIXEL_ARRAY_RECORDING_HEIGHT - format->height) / 2
1166 			   + imx290->vflip->val;
1167 		sel->r.left = IMX290_PIXEL_ARRAY_MARGIN_LEFT
1168 			    + (IMX290_PIXEL_ARRAY_RECORDING_WIDTH - format->width) / 2
1169 			    + imx290->hflip->val;
1170 		sel->r.width = format->width;
1171 		sel->r.height = format->height;
1172 
1173 		return 0;
1174 	}
1175 
1176 	case V4L2_SEL_TGT_NATIVE_SIZE:
1177 	case V4L2_SEL_TGT_CROP_BOUNDS:
1178 		sel->r.top = 0;
1179 		sel->r.left = 0;
1180 		sel->r.width = IMX290_PIXEL_ARRAY_WIDTH;
1181 		sel->r.height = IMX290_PIXEL_ARRAY_HEIGHT;
1182 
1183 		return 0;
1184 
1185 	case V4L2_SEL_TGT_CROP_DEFAULT:
1186 		sel->r.top = IMX290_PIXEL_ARRAY_MARGIN_TOP;
1187 		sel->r.left = IMX290_PIXEL_ARRAY_MARGIN_LEFT;
1188 		sel->r.width = IMX290_PIXEL_ARRAY_RECORDING_WIDTH;
1189 		sel->r.height = IMX290_PIXEL_ARRAY_RECORDING_HEIGHT;
1190 
1191 		return 0;
1192 
1193 	default:
1194 		return -EINVAL;
1195 	}
1196 }
1197 
1198 static int imx290_entity_init_state(struct v4l2_subdev *subdev,
1199 				    struct v4l2_subdev_state *sd_state)
1200 {
1201 	struct v4l2_subdev_format fmt = {
1202 		.which = V4L2_SUBDEV_FORMAT_TRY,
1203 		.format = {
1204 			.width = 1920,
1205 			.height = 1080,
1206 		},
1207 	};
1208 
1209 	imx290_set_fmt(subdev, sd_state, &fmt);
1210 
1211 	return 0;
1212 }
1213 
1214 static const struct v4l2_subdev_core_ops imx290_core_ops = {
1215 	.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
1216 	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
1217 };
1218 
1219 static const struct v4l2_subdev_video_ops imx290_video_ops = {
1220 	.s_stream = imx290_set_stream,
1221 };
1222 
1223 static const struct v4l2_subdev_pad_ops imx290_pad_ops = {
1224 	.enum_mbus_code = imx290_enum_mbus_code,
1225 	.enum_frame_size = imx290_enum_frame_size,
1226 	.get_fmt = v4l2_subdev_get_fmt,
1227 	.set_fmt = imx290_set_fmt,
1228 	.get_selection = imx290_get_selection,
1229 };
1230 
1231 static const struct v4l2_subdev_ops imx290_subdev_ops = {
1232 	.core = &imx290_core_ops,
1233 	.video = &imx290_video_ops,
1234 	.pad = &imx290_pad_ops,
1235 };
1236 
1237 static const struct v4l2_subdev_internal_ops imx290_internal_ops = {
1238 	.init_state = imx290_entity_init_state,
1239 };
1240 
1241 static const struct media_entity_operations imx290_subdev_entity_ops = {
1242 	.link_validate = v4l2_subdev_link_validate,
1243 };
1244 
1245 static int imx290_subdev_init(struct imx290 *imx290)
1246 {
1247 	struct i2c_client *client = to_i2c_client(imx290->dev);
1248 	struct v4l2_subdev_state *state;
1249 	int ret;
1250 
1251 	imx290->current_mode = &imx290_modes_ptr(imx290)[0];
1252 
1253 	v4l2_i2c_subdev_init(&imx290->sd, client, &imx290_subdev_ops);
1254 	imx290->sd.internal_ops = &imx290_internal_ops;
1255 	imx290->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
1256 			    V4L2_SUBDEV_FL_HAS_EVENTS;
1257 	imx290->sd.dev = imx290->dev;
1258 	imx290->sd.entity.ops = &imx290_subdev_entity_ops;
1259 	imx290->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
1260 
1261 	imx290->pad.flags = MEDIA_PAD_FL_SOURCE;
1262 	ret = media_entity_pads_init(&imx290->sd.entity, 1, &imx290->pad);
1263 	if (ret < 0) {
1264 		dev_err(imx290->dev, "Could not register media entity\n");
1265 		return ret;
1266 	}
1267 
1268 	ret = imx290_ctrl_init(imx290);
1269 	if (ret < 0) {
1270 		dev_err(imx290->dev, "Control initialization error %d\n", ret);
1271 		goto err_media;
1272 	}
1273 
1274 	imx290->sd.state_lock = imx290->ctrls.lock;
1275 
1276 	ret = v4l2_subdev_init_finalize(&imx290->sd);
1277 	if (ret < 0) {
1278 		dev_err(imx290->dev, "subdev initialization error %d\n", ret);
1279 		goto err_ctrls;
1280 	}
1281 
1282 	state = v4l2_subdev_lock_and_get_active_state(&imx290->sd);
1283 	imx290_ctrl_update(imx290, imx290->current_mode);
1284 	v4l2_subdev_unlock_state(state);
1285 
1286 	return 0;
1287 
1288 err_ctrls:
1289 	v4l2_ctrl_handler_free(&imx290->ctrls);
1290 err_media:
1291 	media_entity_cleanup(&imx290->sd.entity);
1292 	return ret;
1293 }
1294 
1295 static void imx290_subdev_cleanup(struct imx290 *imx290)
1296 {
1297 	v4l2_subdev_cleanup(&imx290->sd);
1298 	media_entity_cleanup(&imx290->sd.entity);
1299 	v4l2_ctrl_handler_free(&imx290->ctrls);
1300 }
1301 
1302 /* ----------------------------------------------------------------------------
1303  * Power management
1304  */
1305 
1306 static int imx290_power_on(struct imx290 *imx290)
1307 {
1308 	int ret;
1309 
1310 	ret = clk_prepare_enable(imx290->xclk);
1311 	if (ret) {
1312 		dev_err(imx290->dev, "Failed to enable clock\n");
1313 		return ret;
1314 	}
1315 
1316 	ret = regulator_bulk_enable(ARRAY_SIZE(imx290->supplies),
1317 				    imx290->supplies);
1318 	if (ret) {
1319 		dev_err(imx290->dev, "Failed to enable regulators\n");
1320 		clk_disable_unprepare(imx290->xclk);
1321 		return ret;
1322 	}
1323 
1324 	usleep_range(1, 2);
1325 	gpiod_set_value_cansleep(imx290->rst_gpio, 0);
1326 	usleep_range(30000, 31000);
1327 
1328 	return 0;
1329 }
1330 
1331 static void imx290_power_off(struct imx290 *imx290)
1332 {
1333 	clk_disable_unprepare(imx290->xclk);
1334 	gpiod_set_value_cansleep(imx290->rst_gpio, 1);
1335 	regulator_bulk_disable(ARRAY_SIZE(imx290->supplies), imx290->supplies);
1336 }
1337 
1338 static int imx290_runtime_resume(struct device *dev)
1339 {
1340 	struct v4l2_subdev *sd = dev_get_drvdata(dev);
1341 	struct imx290 *imx290 = to_imx290(sd);
1342 
1343 	return imx290_power_on(imx290);
1344 }
1345 
1346 static int imx290_runtime_suspend(struct device *dev)
1347 {
1348 	struct v4l2_subdev *sd = dev_get_drvdata(dev);
1349 	struct imx290 *imx290 = to_imx290(sd);
1350 
1351 	imx290_power_off(imx290);
1352 
1353 	return 0;
1354 }
1355 
1356 static const struct dev_pm_ops imx290_pm_ops = {
1357 	RUNTIME_PM_OPS(imx290_runtime_suspend, imx290_runtime_resume, NULL)
1358 };
1359 
1360 /* ----------------------------------------------------------------------------
1361  * Probe & remove
1362  */
1363 
1364 static const char * const imx290_supply_name[IMX290_NUM_SUPPLIES] = {
1365 	"vdda",
1366 	"vddd",
1367 	"vdddo",
1368 };
1369 
1370 static int imx290_get_regulators(struct device *dev, struct imx290 *imx290)
1371 {
1372 	unsigned int i;
1373 
1374 	for (i = 0; i < ARRAY_SIZE(imx290->supplies); i++)
1375 		imx290->supplies[i].supply = imx290_supply_name[i];
1376 
1377 	return devm_regulator_bulk_get(dev, ARRAY_SIZE(imx290->supplies),
1378 				       imx290->supplies);
1379 }
1380 
1381 static int imx290_init_clk(struct imx290 *imx290)
1382 {
1383 	u32 xclk_freq;
1384 	int ret;
1385 
1386 	ret = device_property_read_u32(imx290->dev, "clock-frequency",
1387 				       &xclk_freq);
1388 	if (ret) {
1389 		dev_err(imx290->dev, "Could not get xclk frequency\n");
1390 		return ret;
1391 	}
1392 
1393 	/* external clock must be 37.125 MHz or 74.25MHz */
1394 	switch (xclk_freq) {
1395 	case 37125000:
1396 		imx290->xclk_idx = IMX290_CLK_37_125;
1397 		break;
1398 	case 74250000:
1399 		imx290->xclk_idx = IMX290_CLK_74_25;
1400 		break;
1401 	default:
1402 		dev_err(imx290->dev, "External clock frequency %u is not supported\n",
1403 			xclk_freq);
1404 		return -EINVAL;
1405 	}
1406 
1407 	ret = clk_set_rate(imx290->xclk, xclk_freq);
1408 	if (ret) {
1409 		dev_err(imx290->dev, "Could not set xclk frequency\n");
1410 		return ret;
1411 	}
1412 
1413 	return 0;
1414 }
1415 
1416 /*
1417  * Returns 0 if all link frequencies used by the driver for the given number
1418  * of MIPI data lanes are mentioned in the device tree, or the value of the
1419  * first missing frequency otherwise.
1420  */
1421 static s64 imx290_check_link_freqs(const struct imx290 *imx290,
1422 				   const struct v4l2_fwnode_endpoint *ep)
1423 {
1424 	int i, j;
1425 	const s64 *freqs = imx290_link_freqs_ptr(imx290);
1426 	int freqs_count = imx290_link_freqs_num(imx290);
1427 
1428 	for (i = 0; i < freqs_count; i++) {
1429 		for (j = 0; j < ep->nr_of_link_frequencies; j++)
1430 			if (freqs[i] == ep->link_frequencies[j])
1431 				break;
1432 		if (j == ep->nr_of_link_frequencies)
1433 			return freqs[i];
1434 	}
1435 	return 0;
1436 }
1437 
1438 static const struct imx290_model_info imx290_models[] = {
1439 	[IMX290_MODEL_IMX290LQR] = {
1440 		.colour_variant = IMX290_VARIANT_COLOUR,
1441 		.init_regs = imx290_global_init_settings_290,
1442 		.init_regs_num = ARRAY_SIZE(imx290_global_init_settings_290),
1443 		.name = "imx290",
1444 	},
1445 	[IMX290_MODEL_IMX290LLR] = {
1446 		.colour_variant = IMX290_VARIANT_MONO,
1447 		.init_regs = imx290_global_init_settings_290,
1448 		.init_regs_num = ARRAY_SIZE(imx290_global_init_settings_290),
1449 		.name = "imx290",
1450 	},
1451 	[IMX290_MODEL_IMX327LQR] = {
1452 		.colour_variant = IMX290_VARIANT_COLOUR,
1453 		.init_regs = imx290_global_init_settings_327,
1454 		.init_regs_num = ARRAY_SIZE(imx290_global_init_settings_327),
1455 		.name = "imx327",
1456 	},
1457 };
1458 
1459 static int imx290_parse_dt(struct imx290 *imx290)
1460 {
1461 	/* Only CSI2 is supported for now: */
1462 	struct v4l2_fwnode_endpoint ep = {
1463 		.bus_type = V4L2_MBUS_CSI2_DPHY
1464 	};
1465 	struct fwnode_handle *endpoint;
1466 	int ret;
1467 	s64 fq;
1468 
1469 	imx290->model = of_device_get_match_data(imx290->dev);
1470 
1471 	endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(imx290->dev), NULL);
1472 	if (!endpoint) {
1473 		dev_err(imx290->dev, "Endpoint node not found\n");
1474 		return -EINVAL;
1475 	}
1476 
1477 	ret = v4l2_fwnode_endpoint_alloc_parse(endpoint, &ep);
1478 	fwnode_handle_put(endpoint);
1479 	if (ret == -ENXIO) {
1480 		dev_err(imx290->dev, "Unsupported bus type, should be CSI2\n");
1481 		goto done;
1482 	} else if (ret) {
1483 		dev_err(imx290->dev, "Parsing endpoint node failed\n");
1484 		goto done;
1485 	}
1486 
1487 	/* Get number of data lanes */
1488 	imx290->nlanes = ep.bus.mipi_csi2.num_data_lanes;
1489 	if (imx290->nlanes != 2 && imx290->nlanes != 4) {
1490 		dev_err(imx290->dev, "Invalid data lanes: %d\n", imx290->nlanes);
1491 		ret = -EINVAL;
1492 		goto done;
1493 	}
1494 
1495 	dev_dbg(imx290->dev, "Using %u data lanes\n", imx290->nlanes);
1496 
1497 	if (!ep.nr_of_link_frequencies) {
1498 		dev_err(imx290->dev, "link-frequency property not found in DT\n");
1499 		ret = -EINVAL;
1500 		goto done;
1501 	}
1502 
1503 	/* Check that link frequences for all the modes are in device tree */
1504 	fq = imx290_check_link_freqs(imx290, &ep);
1505 	if (fq) {
1506 		dev_err(imx290->dev, "Link frequency of %lld is not supported\n",
1507 			fq);
1508 		ret = -EINVAL;
1509 		goto done;
1510 	}
1511 
1512 	ret = 0;
1513 
1514 done:
1515 	v4l2_fwnode_endpoint_free(&ep);
1516 	return ret;
1517 }
1518 
1519 static int imx290_probe(struct i2c_client *client)
1520 {
1521 	struct device *dev = &client->dev;
1522 	struct imx290 *imx290;
1523 	int ret;
1524 
1525 	imx290 = devm_kzalloc(dev, sizeof(*imx290), GFP_KERNEL);
1526 	if (!imx290)
1527 		return -ENOMEM;
1528 
1529 	imx290->dev = dev;
1530 	imx290->regmap = devm_cci_regmap_init_i2c(client, 16);
1531 	if (IS_ERR(imx290->regmap)) {
1532 		dev_err(dev, "Unable to initialize I2C\n");
1533 		return -ENODEV;
1534 	}
1535 
1536 	ret = imx290_parse_dt(imx290);
1537 	if (ret)
1538 		return ret;
1539 
1540 	/* Acquire resources. */
1541 	imx290->xclk = devm_clk_get(dev, "xclk");
1542 	if (IS_ERR(imx290->xclk))
1543 		return dev_err_probe(dev, PTR_ERR(imx290->xclk),
1544 				     "Could not get xclk\n");
1545 
1546 	ret = imx290_get_regulators(dev, imx290);
1547 	if (ret < 0)
1548 		return dev_err_probe(dev, ret, "Cannot get regulators\n");
1549 
1550 	imx290->rst_gpio = devm_gpiod_get_optional(dev, "reset",
1551 						   GPIOD_OUT_HIGH);
1552 	if (IS_ERR(imx290->rst_gpio))
1553 		return dev_err_probe(dev, PTR_ERR(imx290->rst_gpio),
1554 				     "Cannot get reset gpio\n");
1555 
1556 	/* Initialize external clock frequency. */
1557 	ret = imx290_init_clk(imx290);
1558 	if (ret)
1559 		return ret;
1560 
1561 	/*
1562 	 * Enable power management. The driver supports runtime PM, but needs to
1563 	 * work when runtime PM is disabled in the kernel. To that end, power
1564 	 * the sensor on manually here.
1565 	 */
1566 	ret = imx290_power_on(imx290);
1567 	if (ret < 0) {
1568 		dev_err(dev, "Could not power on the device\n");
1569 		return ret;
1570 	}
1571 
1572 	/*
1573 	 * Enable runtime PM with autosuspend. As the device has been powered
1574 	 * manually, mark it as active, and increase the usage count without
1575 	 * resuming the device.
1576 	 */
1577 	pm_runtime_set_active(dev);
1578 	pm_runtime_get_noresume(dev);
1579 	pm_runtime_enable(dev);
1580 	pm_runtime_set_autosuspend_delay(dev, 1000);
1581 	pm_runtime_use_autosuspend(dev);
1582 
1583 	/* Initialize the V4L2 subdev. */
1584 	ret = imx290_subdev_init(imx290);
1585 	if (ret)
1586 		goto err_pm;
1587 
1588 	v4l2_i2c_subdev_set_name(&imx290->sd, client,
1589 				 imx290->model->name, NULL);
1590 
1591 	/*
1592 	 * Finally, register the V4L2 subdev. This must be done after
1593 	 * initializing everything as the subdev can be used immediately after
1594 	 * being registered.
1595 	 */
1596 	ret = v4l2_async_register_subdev(&imx290->sd);
1597 	if (ret < 0) {
1598 		dev_err(dev, "Could not register v4l2 device\n");
1599 		goto err_subdev;
1600 	}
1601 
1602 	/*
1603 	 * Decrease the PM usage count. The device will get suspended after the
1604 	 * autosuspend delay, turning the power off.
1605 	 */
1606 	pm_runtime_mark_last_busy(dev);
1607 	pm_runtime_put_autosuspend(dev);
1608 
1609 	return 0;
1610 
1611 err_subdev:
1612 	imx290_subdev_cleanup(imx290);
1613 err_pm:
1614 	pm_runtime_disable(dev);
1615 	pm_runtime_put_noidle(dev);
1616 	imx290_power_off(imx290);
1617 	return ret;
1618 }
1619 
1620 static void imx290_remove(struct i2c_client *client)
1621 {
1622 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
1623 	struct imx290 *imx290 = to_imx290(sd);
1624 
1625 	v4l2_async_unregister_subdev(sd);
1626 	imx290_subdev_cleanup(imx290);
1627 
1628 	/*
1629 	 * Disable runtime PM. In case runtime PM is disabled in the kernel,
1630 	 * make sure to turn power off manually.
1631 	 */
1632 	pm_runtime_disable(imx290->dev);
1633 	if (!pm_runtime_status_suspended(imx290->dev))
1634 		imx290_power_off(imx290);
1635 	pm_runtime_set_suspended(imx290->dev);
1636 }
1637 
1638 static const struct of_device_id imx290_of_match[] = {
1639 	{
1640 		/* Deprecated - synonym for "sony,imx290lqr" */
1641 		.compatible = "sony,imx290",
1642 		.data = &imx290_models[IMX290_MODEL_IMX290LQR],
1643 	}, {
1644 		.compatible = "sony,imx290lqr",
1645 		.data = &imx290_models[IMX290_MODEL_IMX290LQR],
1646 	}, {
1647 		.compatible = "sony,imx290llr",
1648 		.data = &imx290_models[IMX290_MODEL_IMX290LLR],
1649 	}, {
1650 		.compatible = "sony,imx327lqr",
1651 		.data = &imx290_models[IMX290_MODEL_IMX327LQR],
1652 	},
1653 	{ /* sentinel */ },
1654 };
1655 MODULE_DEVICE_TABLE(of, imx290_of_match);
1656 
1657 static struct i2c_driver imx290_i2c_driver = {
1658 	.probe = imx290_probe,
1659 	.remove = imx290_remove,
1660 	.driver = {
1661 		.name = "imx290",
1662 		.pm = pm_ptr(&imx290_pm_ops),
1663 		.of_match_table = imx290_of_match,
1664 	},
1665 };
1666 
1667 module_i2c_driver(imx290_i2c_driver);
1668 
1669 MODULE_DESCRIPTION("Sony IMX290 CMOS Image Sensor Driver");
1670 MODULE_AUTHOR("FRAMOS GmbH");
1671 MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
1672 MODULE_LICENSE("GPL v2");
1673