1 // SPDX-License-Identifier: GPL-2.0 2 // Copyright (c) 2020 MediaTek Inc. 3 4 #include <linux/delay.h> 5 #include <linux/i2c.h> 6 #include <linux/module.h> 7 #include <linux/pm_runtime.h> 8 #include <linux/regulator/consumer.h> 9 #include <media/v4l2-async.h> 10 #include <media/v4l2-ctrls.h> 11 #include <media/v4l2-device.h> 12 #include <media/v4l2-fwnode.h> 13 #include <media/v4l2-subdev.h> 14 15 #define DW9768_NAME "dw9768" 16 #define DW9768_MAX_FOCUS_POS (1024 - 1) 17 /* 18 * This sets the minimum granularity for the focus positions. 19 * A value of 1 gives maximum accuracy for a desired focus position 20 */ 21 #define DW9768_FOCUS_STEPS 1 22 23 /* 24 * Ring control and Power control register 25 * Bit[1] RING_EN 26 * 0: Direct mode 27 * 1: AAC mode (ringing control mode) 28 * Bit[0] PD 29 * 0: Normal operation mode 30 * 1: Power down mode 31 * DW9768 requires waiting time of Topr after PD reset takes place. 32 */ 33 #define DW9768_RING_PD_CONTROL_REG 0x02 34 #define DW9768_PD_MODE_OFF 0x00 35 #define DW9768_PD_MODE_EN BIT(0) 36 #define DW9768_AAC_MODE_EN BIT(1) 37 38 /* 39 * DW9768 separates two registers to control the VCM position. 40 * One for MSB value, another is LSB value. 41 * DAC_MSB: D[9:8] (ADD: 0x03) 42 * DAC_LSB: D[7:0] (ADD: 0x04) 43 * D[9:0] DAC data input: positive output current = D[9:0] / 1023 * 100[mA] 44 */ 45 #define DW9768_MSB_ADDR 0x03 46 #define DW9768_LSB_ADDR 0x04 47 #define DW9768_STATUS_ADDR 0x05 48 49 /* 50 * AAC mode control & prescale register 51 * Bit[7:5] Namely AC[2:0], decide the VCM mode and operation time. 52 * 001 AAC2 0.48 x Tvib 53 * 010 AAC3 0.70 x Tvib 54 * 011 AAC4 0.75 x Tvib 55 * 101 AAC8 1.13 x Tvib 56 * Bit[2:0] Namely PRESC[2:0], set the internal clock dividing rate as follow. 57 * 000 2 58 * 001 1 59 * 010 1/2 60 * 011 1/4 61 * 100 8 62 * 101 4 63 */ 64 #define DW9768_AAC_PRESC_REG 0x06 65 #define DW9768_AAC_MODE_SEL_MASK GENMASK(7, 5) 66 #define DW9768_CLOCK_PRE_SCALE_SEL_MASK GENMASK(2, 0) 67 68 /* 69 * VCM period of vibration register 70 * Bit[5:0] Defined as VCM rising periodic time (Tvib) together with PRESC[2:0] 71 * Tvib = (6.3ms + AACT[5:0] * 0.1ms) * Dividing Rate 72 * Dividing Rate is the internal clock dividing rate that is defined at 73 * PRESCALE register (ADD: 0x06) 74 */ 75 #define DW9768_AAC_TIME_REG 0x07 76 77 /* 78 * DW9768 requires waiting time (delay time) of t_OPR after power-up, 79 * or in the case of PD reset taking place. 80 */ 81 #define DW9768_T_OPR_US 1000 82 #define DW9768_TVIB_MS_BASE10 (64 - 1) 83 #define DW9768_AAC_MODE_DEFAULT 2 84 #define DW9768_AAC_TIME_DEFAULT 0x20 85 #define DW9768_CLOCK_PRE_SCALE_DEFAULT 1 86 87 /* 88 * This acts as the minimum granularity of lens movement. 89 * Keep this value power of 2, so the control steps can be 90 * uniformly adjusted for gradual lens movement, with desired 91 * number of control steps. 92 */ 93 #define DW9768_MOVE_STEPS 16 94 95 static const char * const dw9768_supply_names[] = { 96 "vin", /* Digital I/O power */ 97 "vdd", /* Digital core power */ 98 }; 99 100 /* dw9768 device structure */ 101 struct dw9768 { 102 struct regulator_bulk_data supplies[ARRAY_SIZE(dw9768_supply_names)]; 103 struct v4l2_ctrl_handler ctrls; 104 struct v4l2_ctrl *focus; 105 struct v4l2_subdev sd; 106 107 u32 aac_mode; 108 u32 aac_timing; 109 u32 clock_presc; 110 u32 move_delay_us; 111 }; 112 113 static inline struct dw9768 *sd_to_dw9768(struct v4l2_subdev *subdev) 114 { 115 return container_of(subdev, struct dw9768, sd); 116 } 117 118 struct dw9768_aac_mode_ot_multi { 119 u32 aac_mode_enum; 120 u32 ot_multi_base100; 121 }; 122 123 struct dw9768_clk_presc_dividing_rate { 124 u32 clk_presc_enum; 125 u32 dividing_rate_base100; 126 }; 127 128 static const struct dw9768_aac_mode_ot_multi aac_mode_ot_multi[] = { 129 {1, 48}, 130 {2, 70}, 131 {3, 75}, 132 {5, 113}, 133 }; 134 135 static const struct dw9768_clk_presc_dividing_rate presc_dividing_rate[] = { 136 {0, 200}, 137 {1, 100}, 138 {2, 50}, 139 {3, 25}, 140 {4, 800}, 141 {5, 400}, 142 }; 143 144 static u32 dw9768_find_ot_multi(u32 aac_mode_param) 145 { 146 u32 cur_ot_multi_base100 = 70; 147 unsigned int i; 148 149 for (i = 0; i < ARRAY_SIZE(aac_mode_ot_multi); i++) { 150 if (aac_mode_ot_multi[i].aac_mode_enum == aac_mode_param) { 151 cur_ot_multi_base100 = 152 aac_mode_ot_multi[i].ot_multi_base100; 153 } 154 } 155 156 return cur_ot_multi_base100; 157 } 158 159 static u32 dw9768_find_dividing_rate(u32 presc_param) 160 { 161 u32 cur_clk_dividing_rate_base100 = 100; 162 unsigned int i; 163 164 for (i = 0; i < ARRAY_SIZE(presc_dividing_rate); i++) { 165 if (presc_dividing_rate[i].clk_presc_enum == presc_param) { 166 cur_clk_dividing_rate_base100 = 167 presc_dividing_rate[i].dividing_rate_base100; 168 } 169 } 170 171 return cur_clk_dividing_rate_base100; 172 } 173 174 /* 175 * DW9768_AAC_PRESC_REG & DW9768_AAC_TIME_REG determine VCM operation time. 176 * For current VCM mode: AAC3, Operation Time would be 0.70 x Tvib. 177 * Tvib = (6.3ms + AACT[5:0] * 0.1MS) * Dividing Rate. 178 * Below is calculation of the operation delay for each step. 179 */ 180 static inline u32 dw9768_cal_move_delay(u32 aac_mode_param, u32 presc_param, 181 u32 aac_timing_param) 182 { 183 u32 Tvib_us; 184 u32 ot_multi_base100; 185 u32 clk_dividing_rate_base100; 186 187 ot_multi_base100 = dw9768_find_ot_multi(aac_mode_param); 188 189 clk_dividing_rate_base100 = dw9768_find_dividing_rate(presc_param); 190 191 Tvib_us = (DW9768_TVIB_MS_BASE10 + aac_timing_param) * 192 clk_dividing_rate_base100; 193 194 return Tvib_us * ot_multi_base100 / 100; 195 } 196 197 static int dw9768_mod_reg(struct dw9768 *dw9768, u8 reg, u8 mask, u8 val) 198 { 199 struct i2c_client *client = v4l2_get_subdevdata(&dw9768->sd); 200 int ret; 201 202 ret = i2c_smbus_read_byte_data(client, reg); 203 if (ret < 0) 204 return ret; 205 206 val = ((unsigned char)ret & ~mask) | (val & mask); 207 208 return i2c_smbus_write_byte_data(client, reg, val); 209 } 210 211 static int dw9768_set_dac(struct dw9768 *dw9768, u16 val) 212 { 213 struct i2c_client *client = v4l2_get_subdevdata(&dw9768->sd); 214 215 /* Write VCM position to registers */ 216 return i2c_smbus_write_word_swapped(client, DW9768_MSB_ADDR, val); 217 } 218 219 static int dw9768_init(struct dw9768 *dw9768) 220 { 221 struct i2c_client *client = v4l2_get_subdevdata(&dw9768->sd); 222 int ret, val; 223 224 /* Reset DW9768_RING_PD_CONTROL_REG to default status 0x00 */ 225 ret = i2c_smbus_write_byte_data(client, DW9768_RING_PD_CONTROL_REG, 226 DW9768_PD_MODE_OFF); 227 if (ret < 0) 228 return ret; 229 230 /* 231 * DW9769 requires waiting delay time of t_OPR 232 * after PD reset takes place. 233 */ 234 usleep_range(DW9768_T_OPR_US, DW9768_T_OPR_US + 100); 235 236 /* Set DW9768_RING_PD_CONTROL_REG to DW9768_AAC_MODE_EN(0x01) */ 237 ret = i2c_smbus_write_byte_data(client, DW9768_RING_PD_CONTROL_REG, 238 DW9768_AAC_MODE_EN); 239 if (ret < 0) 240 return ret; 241 242 /* Set AAC mode */ 243 ret = dw9768_mod_reg(dw9768, DW9768_AAC_PRESC_REG, 244 DW9768_AAC_MODE_SEL_MASK, 245 dw9768->aac_mode << 5); 246 if (ret < 0) 247 return ret; 248 249 /* Set clock presc */ 250 if (dw9768->clock_presc != DW9768_CLOCK_PRE_SCALE_DEFAULT) { 251 ret = dw9768_mod_reg(dw9768, DW9768_AAC_PRESC_REG, 252 DW9768_CLOCK_PRE_SCALE_SEL_MASK, 253 dw9768->clock_presc); 254 if (ret < 0) 255 return ret; 256 } 257 258 /* Set AAC Timing */ 259 if (dw9768->aac_timing != DW9768_AAC_TIME_DEFAULT) { 260 ret = i2c_smbus_write_byte_data(client, DW9768_AAC_TIME_REG, 261 dw9768->aac_timing); 262 if (ret < 0) 263 return ret; 264 } 265 266 for (val = dw9768->focus->val % DW9768_MOVE_STEPS; 267 val <= dw9768->focus->val; 268 val += DW9768_MOVE_STEPS) { 269 ret = dw9768_set_dac(dw9768, val); 270 if (ret) { 271 dev_err(&client->dev, "I2C failure: %d", ret); 272 return ret; 273 } 274 usleep_range(dw9768->move_delay_us, 275 dw9768->move_delay_us + 1000); 276 } 277 278 return 0; 279 } 280 281 static int dw9768_release(struct dw9768 *dw9768) 282 { 283 struct i2c_client *client = v4l2_get_subdevdata(&dw9768->sd); 284 int ret, val; 285 286 val = round_down(dw9768->focus->val, DW9768_MOVE_STEPS); 287 for ( ; val >= 0; val -= DW9768_MOVE_STEPS) { 288 ret = dw9768_set_dac(dw9768, val); 289 if (ret) { 290 dev_err(&client->dev, "I2C write fail: %d", ret); 291 return ret; 292 } 293 usleep_range(dw9768->move_delay_us, 294 dw9768->move_delay_us + 1000); 295 } 296 297 ret = i2c_smbus_write_byte_data(client, DW9768_RING_PD_CONTROL_REG, 298 DW9768_PD_MODE_EN); 299 if (ret < 0) 300 return ret; 301 302 /* 303 * DW9769 requires waiting delay time of t_OPR 304 * after PD reset takes place. 305 */ 306 usleep_range(DW9768_T_OPR_US, DW9768_T_OPR_US + 100); 307 308 return 0; 309 } 310 311 static int dw9768_runtime_suspend(struct device *dev) 312 { 313 struct v4l2_subdev *sd = dev_get_drvdata(dev); 314 struct dw9768 *dw9768 = sd_to_dw9768(sd); 315 316 dw9768_release(dw9768); 317 regulator_bulk_disable(ARRAY_SIZE(dw9768_supply_names), 318 dw9768->supplies); 319 320 return 0; 321 } 322 323 static int dw9768_runtime_resume(struct device *dev) 324 { 325 struct v4l2_subdev *sd = dev_get_drvdata(dev); 326 struct dw9768 *dw9768 = sd_to_dw9768(sd); 327 int ret; 328 329 ret = regulator_bulk_enable(ARRAY_SIZE(dw9768_supply_names), 330 dw9768->supplies); 331 if (ret < 0) { 332 dev_err(dev, "failed to enable regulators\n"); 333 return ret; 334 } 335 336 /* 337 * The datasheet refers to t_OPR that needs to be waited before sending 338 * I2C commands after power-up. 339 */ 340 usleep_range(DW9768_T_OPR_US, DW9768_T_OPR_US + 100); 341 342 ret = dw9768_init(dw9768); 343 if (ret < 0) 344 goto disable_regulator; 345 346 return 0; 347 348 disable_regulator: 349 regulator_bulk_disable(ARRAY_SIZE(dw9768_supply_names), 350 dw9768->supplies); 351 352 return ret; 353 } 354 355 static int dw9768_set_ctrl(struct v4l2_ctrl *ctrl) 356 { 357 struct dw9768 *dw9768 = container_of(ctrl->handler, 358 struct dw9768, ctrls); 359 360 if (ctrl->id == V4L2_CID_FOCUS_ABSOLUTE) 361 return dw9768_set_dac(dw9768, ctrl->val); 362 363 return 0; 364 } 365 366 static const struct v4l2_ctrl_ops dw9768_ctrl_ops = { 367 .s_ctrl = dw9768_set_ctrl, 368 }; 369 370 static int dw9768_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) 371 { 372 return pm_runtime_resume_and_get(sd->dev); 373 } 374 375 static int dw9768_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) 376 { 377 pm_runtime_mark_last_busy(sd->dev); 378 pm_runtime_put_autosuspend(sd->dev); 379 380 return 0; 381 } 382 383 static const struct v4l2_subdev_internal_ops dw9768_int_ops = { 384 .open = dw9768_open, 385 .close = dw9768_close, 386 }; 387 388 static const struct v4l2_subdev_ops dw9768_ops = { }; 389 390 static int dw9768_init_controls(struct dw9768 *dw9768) 391 { 392 struct v4l2_ctrl_handler *hdl = &dw9768->ctrls; 393 const struct v4l2_ctrl_ops *ops = &dw9768_ctrl_ops; 394 395 v4l2_ctrl_handler_init(hdl, 1); 396 397 dw9768->focus = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FOCUS_ABSOLUTE, 0, 398 DW9768_MAX_FOCUS_POS, 399 DW9768_FOCUS_STEPS, 0); 400 401 if (hdl->error) 402 return hdl->error; 403 404 dw9768->sd.ctrl_handler = hdl; 405 406 return 0; 407 } 408 409 static int dw9768_probe(struct i2c_client *client) 410 { 411 struct device *dev = &client->dev; 412 struct dw9768 *dw9768; 413 bool full_power; 414 unsigned int i; 415 int ret; 416 417 dw9768 = devm_kzalloc(dev, sizeof(*dw9768), GFP_KERNEL); 418 if (!dw9768) 419 return -ENOMEM; 420 421 /* Initialize subdev */ 422 v4l2_i2c_subdev_init(&dw9768->sd, client, &dw9768_ops); 423 424 dw9768->aac_mode = DW9768_AAC_MODE_DEFAULT; 425 dw9768->aac_timing = DW9768_AAC_TIME_DEFAULT; 426 dw9768->clock_presc = DW9768_CLOCK_PRE_SCALE_DEFAULT; 427 428 /* Optional indication of AAC mode select */ 429 fwnode_property_read_u32(dev_fwnode(dev), "dongwoon,aac-mode", 430 &dw9768->aac_mode); 431 432 /* Optional indication of clock pre-scale select */ 433 fwnode_property_read_u32(dev_fwnode(dev), "dongwoon,clock-presc", 434 &dw9768->clock_presc); 435 436 /* Optional indication of AAC Timing */ 437 fwnode_property_read_u32(dev_fwnode(dev), "dongwoon,aac-timing", 438 &dw9768->aac_timing); 439 440 dw9768->move_delay_us = dw9768_cal_move_delay(dw9768->aac_mode, 441 dw9768->clock_presc, 442 dw9768->aac_timing); 443 444 for (i = 0; i < ARRAY_SIZE(dw9768_supply_names); i++) 445 dw9768->supplies[i].supply = dw9768_supply_names[i]; 446 447 ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(dw9768_supply_names), 448 dw9768->supplies); 449 if (ret) { 450 dev_err(dev, "failed to get regulators\n"); 451 return ret; 452 } 453 454 /* Initialize controls */ 455 ret = dw9768_init_controls(dw9768); 456 if (ret) 457 goto err_free_handler; 458 459 /* Initialize subdev */ 460 dw9768->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; 461 dw9768->sd.internal_ops = &dw9768_int_ops; 462 463 ret = media_entity_pads_init(&dw9768->sd.entity, 0, NULL); 464 if (ret < 0) 465 goto err_free_handler; 466 467 dw9768->sd.entity.function = MEDIA_ENT_F_LENS; 468 469 /* 470 * Figure out whether we're going to power up the device here. Generally 471 * this is done if CONFIG_PM is disabled in a DT system or the device is 472 * to be powered on in an ACPI system. Similarly for power off in 473 * remove. 474 */ 475 full_power = (is_acpi_node(dev_fwnode(dev)) && 476 acpi_dev_state_d0(dev)) || 477 (is_of_node(dev_fwnode(dev)) && !IS_ENABLED(CONFIG_PM)); 478 if (full_power) { 479 ret = dw9768_runtime_resume(dev); 480 if (ret < 0) { 481 dev_err(dev, "failed to power on: %d\n", ret); 482 goto err_clean_entity; 483 } 484 pm_runtime_set_active(dev); 485 } 486 487 pm_runtime_enable(dev); 488 ret = v4l2_async_register_subdev(&dw9768->sd); 489 if (ret < 0) { 490 dev_err(dev, "failed to register V4L2 subdev: %d", ret); 491 goto err_power_off; 492 } 493 494 pm_runtime_set_autosuspend_delay(dev, 1000); 495 pm_runtime_use_autosuspend(dev); 496 pm_runtime_idle(dev); 497 498 return 0; 499 500 err_power_off: 501 pm_runtime_disable(dev); 502 if (full_power) { 503 dw9768_runtime_suspend(dev); 504 pm_runtime_set_suspended(dev); 505 } 506 err_clean_entity: 507 media_entity_cleanup(&dw9768->sd.entity); 508 err_free_handler: 509 v4l2_ctrl_handler_free(&dw9768->ctrls); 510 511 return ret; 512 } 513 514 static void dw9768_remove(struct i2c_client *client) 515 { 516 struct v4l2_subdev *sd = i2c_get_clientdata(client); 517 struct dw9768 *dw9768 = sd_to_dw9768(sd); 518 struct device *dev = &client->dev; 519 520 v4l2_async_unregister_subdev(&dw9768->sd); 521 v4l2_ctrl_handler_free(&dw9768->ctrls); 522 media_entity_cleanup(&dw9768->sd.entity); 523 pm_runtime_disable(dev); 524 if ((is_acpi_node(dev_fwnode(dev)) && acpi_dev_state_d0(dev)) || 525 (is_of_node(dev_fwnode(dev)) && !IS_ENABLED(CONFIG_PM))) { 526 dw9768_runtime_suspend(dev); 527 pm_runtime_set_suspended(dev); 528 } 529 } 530 531 static const struct of_device_id dw9768_of_table[] = { 532 { .compatible = "dongwoon,dw9768" }, 533 { .compatible = "giantec,gt9769" }, 534 {} 535 }; 536 MODULE_DEVICE_TABLE(of, dw9768_of_table); 537 538 static const struct dev_pm_ops dw9768_pm_ops = { 539 SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, 540 pm_runtime_force_resume) 541 SET_RUNTIME_PM_OPS(dw9768_runtime_suspend, dw9768_runtime_resume, NULL) 542 }; 543 544 static struct i2c_driver dw9768_i2c_driver = { 545 .driver = { 546 .name = DW9768_NAME, 547 .pm = &dw9768_pm_ops, 548 .of_match_table = dw9768_of_table, 549 }, 550 .probe = dw9768_probe, 551 .remove = dw9768_remove, 552 }; 553 module_i2c_driver(dw9768_i2c_driver); 554 555 MODULE_AUTHOR("Dongchun Zhu <dongchun.zhu@mediatek.com>"); 556 MODULE_DESCRIPTION("DW9768 VCM driver"); 557 MODULE_LICENSE("GPL v2"); 558