1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Driver for the Texas Instruments DS90UB953 video serializer 4 * 5 * Based on a driver from Luca Ceresoli <luca@lucaceresoli.net> 6 * 7 * Copyright (c) 2019 Luca Ceresoli <luca@lucaceresoli.net> 8 * Copyright (c) 2023 Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> 9 */ 10 11 #include <linux/clk-provider.h> 12 #include <linux/clk.h> 13 #include <linux/delay.h> 14 #include <linux/fwnode.h> 15 #include <linux/gpio/driver.h> 16 #include <linux/i2c-atr.h> 17 #include <linux/i2c.h> 18 #include <linux/kernel.h> 19 #include <linux/math64.h> 20 #include <linux/module.h> 21 #include <linux/property.h> 22 #include <linux/rational.h> 23 #include <linux/regmap.h> 24 25 #include <media/i2c/ds90ub9xx.h> 26 #include <media/v4l2-ctrls.h> 27 #include <media/v4l2-event.h> 28 #include <media/v4l2-fwnode.h> 29 #include <media/v4l2-mediabus.h> 30 #include <media/v4l2-subdev.h> 31 32 #define UB953_PAD_SINK 0 33 #define UB953_PAD_SOURCE 1 34 35 #define UB953_NUM_GPIOS 4 36 37 #define UB953_DEFAULT_CLKOUT_RATE 25000000UL 38 39 #define UB953_REG_RESET_CTL 0x01 40 #define UB953_REG_RESET_CTL_DIGITAL_RESET_1 BIT(1) 41 #define UB953_REG_RESET_CTL_DIGITAL_RESET_0 BIT(0) 42 43 #define UB953_REG_GENERAL_CFG 0x02 44 #define UB953_REG_GENERAL_CFG_CONT_CLK BIT(6) 45 #define UB953_REG_GENERAL_CFG_CSI_LANE_SEL_SHIFT 4 46 #define UB953_REG_GENERAL_CFG_CSI_LANE_SEL_MASK GENMASK(5, 4) 47 #define UB953_REG_GENERAL_CFG_CRC_TX_GEN_ENABLE BIT(1) 48 #define UB953_REG_GENERAL_CFG_I2C_STRAP_MODE BIT(0) 49 50 #define UB953_REG_MODE_SEL 0x03 51 #define UB953_REG_MODE_SEL_MODE_DONE BIT(3) 52 #define UB953_REG_MODE_SEL_MODE_OVERRIDE BIT(4) 53 #define UB953_REG_MODE_SEL_MODE_MASK GENMASK(2, 0) 54 55 #define UB953_REG_CLKOUT_CTRL0 0x06 56 #define UB953_REG_CLKOUT_CTRL1 0x07 57 58 #define UB953_REG_SCL_HIGH_TIME 0x0b 59 #define UB953_REG_SCL_LOW_TIME 0x0c 60 61 #define UB953_REG_LOCAL_GPIO_DATA 0x0d 62 #define UB953_REG_LOCAL_GPIO_DATA_GPIO_RMTEN(n) BIT(4 + (n)) 63 #define UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(n) BIT(0 + (n)) 64 65 #define UB953_REG_GPIO_INPUT_CTRL 0x0e 66 #define UB953_REG_GPIO_INPUT_CTRL_OUT_EN(n) BIT(4 + (n)) 67 #define UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(n) BIT(0 + (n)) 68 69 #define UB953_REG_REV_MASK_ID 0x50 70 #define UB953_REG_GENERAL_STATUS 0x52 71 72 #define UB953_REG_GPIO_PIN_STS 0x53 73 #define UB953_REG_GPIO_PIN_STS_GPIO_STS(n) BIT(0 + (n)) 74 75 #define UB953_REG_BIST_ERR_CNT 0x54 76 #define UB953_REG_CRC_ERR_CNT1 0x55 77 #define UB953_REG_CRC_ERR_CNT2 0x56 78 79 #define UB953_REG_CSI_ERR_CNT 0x5c 80 #define UB953_REG_CSI_ERR_STATUS 0x5d 81 #define UB953_REG_CSI_ERR_DLANE01 0x5e 82 #define UB953_REG_CSI_ERR_DLANE23 0x5f 83 #define UB953_REG_CSI_ERR_CLK_LANE 0x60 84 #define UB953_REG_CSI_PKT_HDR_VC_ID 0x61 85 #define UB953_REG_PKT_HDR_WC_LSB 0x62 86 #define UB953_REG_PKT_HDR_WC_MSB 0x63 87 #define UB953_REG_CSI_ECC 0x64 88 89 #define UB953_REG_IND_ACC_CTL 0xb0 90 #define UB953_REG_IND_ACC_ADDR 0xb1 91 #define UB953_REG_IND_ACC_DATA 0xb2 92 93 #define UB953_REG_FPD3_RX_ID(n) (0xf0 + (n)) 94 #define UB953_REG_FPD3_RX_ID_LEN 6 95 96 /* Indirect register blocks */ 97 #define UB953_IND_TARGET_PAT_GEN 0x00 98 #define UB953_IND_TARGET_FPD3_TX 0x01 99 #define UB953_IND_TARGET_DIE_ID 0x02 100 101 #define UB953_IND_PGEN_CTL 0x01 102 #define UB953_IND_PGEN_CTL_PGEN_ENABLE BIT(0) 103 #define UB953_IND_PGEN_CFG 0x02 104 #define UB953_IND_PGEN_CSI_DI 0x03 105 #define UB953_IND_PGEN_LINE_SIZE1 0x04 106 #define UB953_IND_PGEN_LINE_SIZE0 0x05 107 #define UB953_IND_PGEN_BAR_SIZE1 0x06 108 #define UB953_IND_PGEN_BAR_SIZE0 0x07 109 #define UB953_IND_PGEN_ACT_LPF1 0x08 110 #define UB953_IND_PGEN_ACT_LPF0 0x09 111 #define UB953_IND_PGEN_TOT_LPF1 0x0a 112 #define UB953_IND_PGEN_TOT_LPF0 0x0b 113 #define UB953_IND_PGEN_LINE_PD1 0x0c 114 #define UB953_IND_PGEN_LINE_PD0 0x0d 115 #define UB953_IND_PGEN_VBP 0x0e 116 #define UB953_IND_PGEN_VFP 0x0f 117 #define UB953_IND_PGEN_COLOR(n) (0x10 + (n)) /* n <= 15 */ 118 119 /* Note: Only sync mode supported for now */ 120 enum ub953_mode { 121 /* FPD-Link III CSI-2 synchronous mode */ 122 UB953_MODE_SYNC, 123 /* FPD-Link III CSI-2 non-synchronous mode, external ref clock */ 124 UB953_MODE_NONSYNC_EXT, 125 /* FPD-Link III CSI-2 non-synchronous mode, internal ref clock */ 126 UB953_MODE_NONSYNC_INT, 127 /* FPD-Link III DVP mode */ 128 UB953_MODE_DVP, 129 }; 130 131 struct ub953_hw_data { 132 const char *model; 133 bool is_ub971; 134 }; 135 136 struct ub953_clkout_data { 137 u32 hs_div; 138 u32 m; 139 u32 n; 140 unsigned long rate; 141 }; 142 143 struct ub953_data { 144 const struct ub953_hw_data *hw_data; 145 146 struct i2c_client *client; 147 struct regmap *regmap; 148 struct clk *clkin; 149 150 u32 num_data_lanes; 151 bool non_continous_clk; 152 153 struct gpio_chip gpio_chip; 154 155 struct v4l2_subdev sd; 156 struct media_pad pads[2]; 157 158 struct v4l2_async_notifier notifier; 159 160 struct v4l2_subdev *source_sd; 161 u16 source_sd_pad; 162 163 u64 enabled_source_streams; 164 165 /* lock for register access */ 166 struct mutex reg_lock; 167 168 u8 current_indirect_target; 169 170 struct clk_hw clkout_clk_hw; 171 172 enum ub953_mode mode; 173 174 const struct ds90ub9xx_platform_data *plat_data; 175 }; 176 177 static inline struct ub953_data *sd_to_ub953(struct v4l2_subdev *sd) 178 { 179 return container_of(sd, struct ub953_data, sd); 180 } 181 182 /* 183 * HW Access 184 */ 185 186 static int ub953_read(struct ub953_data *priv, u8 reg, u8 *val) 187 { 188 unsigned int v; 189 int ret; 190 191 mutex_lock(&priv->reg_lock); 192 193 ret = regmap_read(priv->regmap, reg, &v); 194 if (ret) { 195 dev_err(&priv->client->dev, "Cannot read register 0x%02x: %d\n", 196 reg, ret); 197 goto out_unlock; 198 } 199 200 *val = v; 201 202 out_unlock: 203 mutex_unlock(&priv->reg_lock); 204 205 return ret; 206 } 207 208 static int ub953_write(struct ub953_data *priv, u8 reg, u8 val) 209 { 210 int ret; 211 212 mutex_lock(&priv->reg_lock); 213 214 ret = regmap_write(priv->regmap, reg, val); 215 if (ret) 216 dev_err(&priv->client->dev, 217 "Cannot write register 0x%02x: %d\n", reg, ret); 218 219 mutex_unlock(&priv->reg_lock); 220 221 return ret; 222 } 223 224 static int ub953_select_ind_reg_block(struct ub953_data *priv, u8 block) 225 { 226 struct device *dev = &priv->client->dev; 227 int ret; 228 229 if (priv->current_indirect_target == block) 230 return 0; 231 232 ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_CTL, block << 2); 233 if (ret) { 234 dev_err(dev, "%s: cannot select indirect target %u (%d)\n", 235 __func__, block, ret); 236 return ret; 237 } 238 239 priv->current_indirect_target = block; 240 241 return 0; 242 } 243 244 __maybe_unused 245 static int ub953_read_ind(struct ub953_data *priv, u8 block, u8 reg, u8 *val) 246 { 247 unsigned int v; 248 int ret; 249 250 mutex_lock(&priv->reg_lock); 251 252 ret = ub953_select_ind_reg_block(priv, block); 253 if (ret) 254 goto out_unlock; 255 256 ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg); 257 if (ret) { 258 dev_err(&priv->client->dev, 259 "Write to IND_ACC_ADDR failed when reading %u:%x02x: %d\n", 260 block, reg, ret); 261 goto out_unlock; 262 } 263 264 ret = regmap_read(priv->regmap, UB953_REG_IND_ACC_DATA, &v); 265 if (ret) { 266 dev_err(&priv->client->dev, 267 "Write to IND_ACC_DATA failed when reading %u:%x02x: %d\n", 268 block, reg, ret); 269 goto out_unlock; 270 } 271 272 *val = v; 273 274 out_unlock: 275 mutex_unlock(&priv->reg_lock); 276 277 return ret; 278 } 279 280 __maybe_unused 281 static int ub953_write_ind(struct ub953_data *priv, u8 block, u8 reg, u8 val) 282 { 283 int ret; 284 285 mutex_lock(&priv->reg_lock); 286 287 ret = ub953_select_ind_reg_block(priv, block); 288 if (ret) 289 goto out_unlock; 290 291 ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg); 292 if (ret) { 293 dev_err(&priv->client->dev, 294 "Write to IND_ACC_ADDR failed when writing %u:%x02x: %d\n", 295 block, reg, ret); 296 goto out_unlock; 297 } 298 299 ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_DATA, val); 300 if (ret) { 301 dev_err(&priv->client->dev, 302 "Write to IND_ACC_DATA failed when writing %u:%x02x\n: %d\n", 303 block, reg, ret); 304 } 305 306 out_unlock: 307 mutex_unlock(&priv->reg_lock); 308 309 return ret; 310 } 311 312 /* 313 * GPIO chip 314 */ 315 static int ub953_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) 316 { 317 struct ub953_data *priv = gpiochip_get_data(gc); 318 int ret; 319 u8 v; 320 321 ret = ub953_read(priv, UB953_REG_GPIO_INPUT_CTRL, &v); 322 if (ret) 323 return ret; 324 325 if (v & UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset)) 326 return GPIO_LINE_DIRECTION_IN; 327 else 328 return GPIO_LINE_DIRECTION_OUT; 329 } 330 331 static int ub953_gpio_direction_in(struct gpio_chip *gc, unsigned int offset) 332 { 333 struct ub953_data *priv = gpiochip_get_data(gc); 334 335 return regmap_update_bits(priv->regmap, UB953_REG_GPIO_INPUT_CTRL, 336 UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset) | 337 UB953_REG_GPIO_INPUT_CTRL_OUT_EN(offset), 338 UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset)); 339 } 340 341 static int ub953_gpio_direction_out(struct gpio_chip *gc, unsigned int offset, 342 int value) 343 { 344 struct ub953_data *priv = gpiochip_get_data(gc); 345 int ret; 346 347 ret = regmap_update_bits(priv->regmap, UB953_REG_LOCAL_GPIO_DATA, 348 UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset), 349 value ? UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset) : 350 0); 351 352 if (ret) 353 return ret; 354 355 return regmap_update_bits(priv->regmap, UB953_REG_GPIO_INPUT_CTRL, 356 UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset) | 357 UB953_REG_GPIO_INPUT_CTRL_OUT_EN(offset), 358 UB953_REG_GPIO_INPUT_CTRL_OUT_EN(offset)); 359 } 360 361 static int ub953_gpio_get(struct gpio_chip *gc, unsigned int offset) 362 { 363 struct ub953_data *priv = gpiochip_get_data(gc); 364 int ret; 365 u8 v; 366 367 ret = ub953_read(priv, UB953_REG_GPIO_PIN_STS, &v); 368 if (ret) 369 return ret; 370 371 return !!(v & UB953_REG_GPIO_PIN_STS_GPIO_STS(offset)); 372 } 373 374 static void ub953_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) 375 { 376 struct ub953_data *priv = gpiochip_get_data(gc); 377 378 regmap_update_bits(priv->regmap, UB953_REG_LOCAL_GPIO_DATA, 379 UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset), 380 value ? UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset) : 381 0); 382 } 383 384 static int ub953_gpio_of_xlate(struct gpio_chip *gc, 385 const struct of_phandle_args *gpiospec, 386 u32 *flags) 387 { 388 if (flags) 389 *flags = gpiospec->args[1]; 390 391 return gpiospec->args[0]; 392 } 393 394 static int ub953_gpiochip_probe(struct ub953_data *priv) 395 { 396 struct device *dev = &priv->client->dev; 397 struct gpio_chip *gc = &priv->gpio_chip; 398 int ret; 399 400 /* Set all GPIOs to local input mode */ 401 ub953_write(priv, UB953_REG_LOCAL_GPIO_DATA, 0); 402 ub953_write(priv, UB953_REG_GPIO_INPUT_CTRL, 0xf); 403 404 gc->label = dev_name(dev); 405 gc->parent = dev; 406 gc->owner = THIS_MODULE; 407 gc->base = -1; 408 gc->can_sleep = true; 409 gc->ngpio = UB953_NUM_GPIOS; 410 gc->get_direction = ub953_gpio_get_direction; 411 gc->direction_input = ub953_gpio_direction_in; 412 gc->direction_output = ub953_gpio_direction_out; 413 gc->get = ub953_gpio_get; 414 gc->set = ub953_gpio_set; 415 gc->of_xlate = ub953_gpio_of_xlate; 416 gc->of_gpio_n_cells = 2; 417 418 ret = gpiochip_add_data(gc, priv); 419 if (ret) { 420 dev_err(dev, "Failed to add GPIOs: %d\n", ret); 421 return ret; 422 } 423 424 return 0; 425 } 426 427 static void ub953_gpiochip_remove(struct ub953_data *priv) 428 { 429 gpiochip_remove(&priv->gpio_chip); 430 } 431 432 /* 433 * V4L2 434 */ 435 436 static int _ub953_set_routing(struct v4l2_subdev *sd, 437 struct v4l2_subdev_state *state, 438 struct v4l2_subdev_krouting *routing) 439 { 440 static const struct v4l2_mbus_framefmt format = { 441 .width = 640, 442 .height = 480, 443 .code = MEDIA_BUS_FMT_UYVY8_1X16, 444 .field = V4L2_FIELD_NONE, 445 .colorspace = V4L2_COLORSPACE_SRGB, 446 .ycbcr_enc = V4L2_YCBCR_ENC_601, 447 .quantization = V4L2_QUANTIZATION_LIM_RANGE, 448 .xfer_func = V4L2_XFER_FUNC_SRGB, 449 }; 450 int ret; 451 452 /* 453 * Note: we can only support up to V4L2_FRAME_DESC_ENTRY_MAX, until 454 * frame desc is made dynamically allocated. 455 */ 456 457 if (routing->num_routes > V4L2_FRAME_DESC_ENTRY_MAX) 458 return -EINVAL; 459 460 ret = v4l2_subdev_routing_validate(sd, routing, 461 V4L2_SUBDEV_ROUTING_ONLY_1_TO_1); 462 if (ret) 463 return ret; 464 465 ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing, &format); 466 if (ret) 467 return ret; 468 469 return 0; 470 } 471 472 static int ub953_set_routing(struct v4l2_subdev *sd, 473 struct v4l2_subdev_state *state, 474 enum v4l2_subdev_format_whence which, 475 struct v4l2_subdev_krouting *routing) 476 { 477 struct ub953_data *priv = sd_to_ub953(sd); 478 479 if (which == V4L2_SUBDEV_FORMAT_ACTIVE && priv->enabled_source_streams) 480 return -EBUSY; 481 482 return _ub953_set_routing(sd, state, routing); 483 } 484 485 static int ub953_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, 486 struct v4l2_mbus_frame_desc *fd) 487 { 488 struct ub953_data *priv = sd_to_ub953(sd); 489 struct v4l2_mbus_frame_desc source_fd; 490 struct v4l2_subdev_route *route; 491 struct v4l2_subdev_state *state; 492 int ret; 493 494 if (pad != UB953_PAD_SOURCE) 495 return -EINVAL; 496 497 ret = v4l2_subdev_call(priv->source_sd, pad, get_frame_desc, 498 priv->source_sd_pad, &source_fd); 499 if (ret) 500 return ret; 501 502 fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2; 503 504 state = v4l2_subdev_lock_and_get_active_state(sd); 505 506 for_each_active_route(&state->routing, route) { 507 struct v4l2_mbus_frame_desc_entry *source_entry = NULL; 508 unsigned int i; 509 510 if (route->source_pad != pad) 511 continue; 512 513 for (i = 0; i < source_fd.num_entries; i++) { 514 if (source_fd.entry[i].stream == route->sink_stream) { 515 source_entry = &source_fd.entry[i]; 516 break; 517 } 518 } 519 520 if (!source_entry) { 521 dev_err(&priv->client->dev, 522 "Failed to find stream from source frame desc\n"); 523 ret = -EPIPE; 524 goto out_unlock; 525 } 526 527 fd->entry[fd->num_entries].stream = route->source_stream; 528 fd->entry[fd->num_entries].flags = source_entry->flags; 529 fd->entry[fd->num_entries].length = source_entry->length; 530 fd->entry[fd->num_entries].pixelcode = source_entry->pixelcode; 531 fd->entry[fd->num_entries].bus.csi2.vc = 532 source_entry->bus.csi2.vc; 533 fd->entry[fd->num_entries].bus.csi2.dt = 534 source_entry->bus.csi2.dt; 535 536 fd->num_entries++; 537 } 538 539 out_unlock: 540 v4l2_subdev_unlock_state(state); 541 542 return ret; 543 } 544 545 static int ub953_set_fmt(struct v4l2_subdev *sd, 546 struct v4l2_subdev_state *state, 547 struct v4l2_subdev_format *format) 548 { 549 struct ub953_data *priv = sd_to_ub953(sd); 550 struct v4l2_mbus_framefmt *fmt; 551 552 if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE && 553 priv->enabled_source_streams) 554 return -EBUSY; 555 556 /* No transcoding, source and sink formats must match. */ 557 if (format->pad == UB953_PAD_SOURCE) 558 return v4l2_subdev_get_fmt(sd, state, format); 559 560 /* Set sink format */ 561 fmt = v4l2_subdev_state_get_format(state, format->pad, format->stream); 562 if (!fmt) 563 return -EINVAL; 564 565 *fmt = format->format; 566 567 /* Propagate to source format */ 568 fmt = v4l2_subdev_state_get_opposite_stream_format(state, format->pad, 569 format->stream); 570 if (!fmt) 571 return -EINVAL; 572 573 *fmt = format->format; 574 575 return 0; 576 } 577 578 static int ub953_init_state(struct v4l2_subdev *sd, 579 struct v4l2_subdev_state *state) 580 { 581 struct v4l2_subdev_route routes[] = { 582 { 583 .sink_pad = UB953_PAD_SINK, 584 .sink_stream = 0, 585 .source_pad = UB953_PAD_SOURCE, 586 .source_stream = 0, 587 .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE, 588 }, 589 }; 590 591 struct v4l2_subdev_krouting routing = { 592 .num_routes = ARRAY_SIZE(routes), 593 .routes = routes, 594 }; 595 596 return _ub953_set_routing(sd, state, &routing); 597 } 598 599 static int ub953_log_status(struct v4l2_subdev *sd) 600 { 601 struct ub953_data *priv = sd_to_ub953(sd); 602 struct device *dev = &priv->client->dev; 603 u8 v = 0, v1 = 0, v2 = 0; 604 unsigned int i; 605 char id[UB953_REG_FPD3_RX_ID_LEN]; 606 u8 gpio_local_data = 0; 607 u8 gpio_input_ctrl = 0; 608 u8 gpio_pin_sts = 0; 609 610 for (i = 0; i < sizeof(id); i++) 611 ub953_read(priv, UB953_REG_FPD3_RX_ID(i), &id[i]); 612 613 dev_info(dev, "ID '%.*s'\n", (int)sizeof(id), id); 614 615 ub953_read(priv, UB953_REG_GENERAL_STATUS, &v); 616 dev_info(dev, "GENERAL_STATUS %#02x\n", v); 617 618 ub953_read(priv, UB953_REG_CRC_ERR_CNT1, &v1); 619 ub953_read(priv, UB953_REG_CRC_ERR_CNT2, &v2); 620 dev_info(dev, "CRC error count %u\n", v1 | (v2 << 8)); 621 622 ub953_read(priv, UB953_REG_CSI_ERR_CNT, &v); 623 dev_info(dev, "CSI error count %u\n", v); 624 625 ub953_read(priv, UB953_REG_CSI_ERR_STATUS, &v); 626 dev_info(dev, "CSI_ERR_STATUS %#02x\n", v); 627 628 ub953_read(priv, UB953_REG_CSI_ERR_DLANE01, &v); 629 dev_info(dev, "CSI_ERR_DLANE01 %#02x\n", v); 630 631 ub953_read(priv, UB953_REG_CSI_ERR_DLANE23, &v); 632 dev_info(dev, "CSI_ERR_DLANE23 %#02x\n", v); 633 634 ub953_read(priv, UB953_REG_CSI_ERR_CLK_LANE, &v); 635 dev_info(dev, "CSI_ERR_CLK_LANE %#02x\n", v); 636 637 ub953_read(priv, UB953_REG_CSI_PKT_HDR_VC_ID, &v); 638 dev_info(dev, "CSI packet header VC %u ID %u\n", v >> 6, v & 0x3f); 639 640 ub953_read(priv, UB953_REG_PKT_HDR_WC_LSB, &v1); 641 ub953_read(priv, UB953_REG_PKT_HDR_WC_MSB, &v2); 642 dev_info(dev, "CSI packet header WC %u\n", (v2 << 8) | v1); 643 644 ub953_read(priv, UB953_REG_CSI_ECC, &v); 645 dev_info(dev, "CSI ECC %#02x\n", v); 646 647 ub953_read(priv, UB953_REG_LOCAL_GPIO_DATA, &gpio_local_data); 648 ub953_read(priv, UB953_REG_GPIO_INPUT_CTRL, &gpio_input_ctrl); 649 ub953_read(priv, UB953_REG_GPIO_PIN_STS, &gpio_pin_sts); 650 651 for (i = 0; i < UB953_NUM_GPIOS; i++) { 652 dev_info(dev, 653 "GPIO%u: remote: %u is_input: %u is_output: %u val: %u sts: %u\n", 654 i, 655 !!(gpio_local_data & UB953_REG_LOCAL_GPIO_DATA_GPIO_RMTEN(i)), 656 !!(gpio_input_ctrl & UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(i)), 657 !!(gpio_input_ctrl & UB953_REG_GPIO_INPUT_CTRL_OUT_EN(i)), 658 !!(gpio_local_data & UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(i)), 659 !!(gpio_pin_sts & UB953_REG_GPIO_PIN_STS_GPIO_STS(i))); 660 } 661 662 return 0; 663 } 664 665 static int ub953_enable_streams(struct v4l2_subdev *sd, 666 struct v4l2_subdev_state *state, u32 pad, 667 u64 streams_mask) 668 { 669 struct ub953_data *priv = sd_to_ub953(sd); 670 u64 sink_streams; 671 int ret; 672 673 sink_streams = v4l2_subdev_state_xlate_streams(state, UB953_PAD_SOURCE, 674 UB953_PAD_SINK, 675 &streams_mask); 676 677 ret = v4l2_subdev_enable_streams(priv->source_sd, priv->source_sd_pad, 678 sink_streams); 679 if (ret) 680 return ret; 681 682 priv->enabled_source_streams |= streams_mask; 683 684 return 0; 685 } 686 687 static int ub953_disable_streams(struct v4l2_subdev *sd, 688 struct v4l2_subdev_state *state, u32 pad, 689 u64 streams_mask) 690 { 691 struct ub953_data *priv = sd_to_ub953(sd); 692 u64 sink_streams; 693 int ret; 694 695 sink_streams = v4l2_subdev_state_xlate_streams(state, UB953_PAD_SOURCE, 696 UB953_PAD_SINK, 697 &streams_mask); 698 699 ret = v4l2_subdev_disable_streams(priv->source_sd, priv->source_sd_pad, 700 sink_streams); 701 if (ret) 702 return ret; 703 704 priv->enabled_source_streams &= ~streams_mask; 705 706 return 0; 707 } 708 709 static const struct v4l2_subdev_pad_ops ub953_pad_ops = { 710 .enable_streams = ub953_enable_streams, 711 .disable_streams = ub953_disable_streams, 712 .set_routing = ub953_set_routing, 713 .get_frame_desc = ub953_get_frame_desc, 714 .get_fmt = v4l2_subdev_get_fmt, 715 .set_fmt = ub953_set_fmt, 716 }; 717 718 static const struct v4l2_subdev_core_ops ub953_subdev_core_ops = { 719 .log_status = ub953_log_status, 720 .subscribe_event = v4l2_ctrl_subdev_subscribe_event, 721 .unsubscribe_event = v4l2_event_subdev_unsubscribe, 722 }; 723 724 static const struct v4l2_subdev_ops ub953_subdev_ops = { 725 .core = &ub953_subdev_core_ops, 726 .pad = &ub953_pad_ops, 727 }; 728 729 static const struct v4l2_subdev_internal_ops ub953_internal_ops = { 730 .init_state = ub953_init_state, 731 }; 732 733 static const struct media_entity_operations ub953_entity_ops = { 734 .link_validate = v4l2_subdev_link_validate, 735 }; 736 737 static int ub953_notify_bound(struct v4l2_async_notifier *notifier, 738 struct v4l2_subdev *source_subdev, 739 struct v4l2_async_connection *asd) 740 { 741 struct ub953_data *priv = sd_to_ub953(notifier->sd); 742 struct device *dev = &priv->client->dev; 743 int ret; 744 745 ret = media_entity_get_fwnode_pad(&source_subdev->entity, 746 source_subdev->fwnode, 747 MEDIA_PAD_FL_SOURCE); 748 if (ret < 0) { 749 dev_err(dev, "Failed to find pad for %s\n", 750 source_subdev->name); 751 return ret; 752 } 753 754 priv->source_sd = source_subdev; 755 priv->source_sd_pad = ret; 756 757 ret = media_create_pad_link(&source_subdev->entity, priv->source_sd_pad, 758 &priv->sd.entity, 0, 759 MEDIA_LNK_FL_ENABLED | 760 MEDIA_LNK_FL_IMMUTABLE); 761 if (ret) { 762 dev_err(dev, "Unable to link %s:%u -> %s:0\n", 763 source_subdev->name, priv->source_sd_pad, 764 priv->sd.name); 765 return ret; 766 } 767 768 return 0; 769 } 770 771 static const struct v4l2_async_notifier_operations ub953_notify_ops = { 772 .bound = ub953_notify_bound, 773 }; 774 775 static int ub953_v4l2_notifier_register(struct ub953_data *priv) 776 { 777 struct device *dev = &priv->client->dev; 778 struct v4l2_async_connection *asd; 779 struct fwnode_handle *ep_fwnode; 780 int ret; 781 782 ep_fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), 783 UB953_PAD_SINK, 0, 0); 784 if (!ep_fwnode) { 785 dev_err(dev, "No graph endpoint\n"); 786 return -ENODEV; 787 } 788 789 v4l2_async_subdev_nf_init(&priv->notifier, &priv->sd); 790 791 asd = v4l2_async_nf_add_fwnode_remote(&priv->notifier, ep_fwnode, 792 struct v4l2_async_connection); 793 794 fwnode_handle_put(ep_fwnode); 795 796 if (IS_ERR(asd)) { 797 dev_err(dev, "Failed to add subdev: %ld", PTR_ERR(asd)); 798 v4l2_async_nf_cleanup(&priv->notifier); 799 return PTR_ERR(asd); 800 } 801 802 priv->notifier.ops = &ub953_notify_ops; 803 804 ret = v4l2_async_nf_register(&priv->notifier); 805 if (ret) { 806 dev_err(dev, "Failed to register subdev_notifier"); 807 v4l2_async_nf_cleanup(&priv->notifier); 808 return ret; 809 } 810 811 return 0; 812 } 813 814 static void ub953_v4l2_notifier_unregister(struct ub953_data *priv) 815 { 816 v4l2_async_nf_unregister(&priv->notifier); 817 v4l2_async_nf_cleanup(&priv->notifier); 818 } 819 820 /* 821 * Probing 822 */ 823 824 static int ub953_i2c_master_init(struct ub953_data *priv) 825 { 826 /* i2c fast mode */ 827 u32 ref = 26250000; 828 u32 scl_high = 915; /* ns */ 829 u32 scl_low = 1641; /* ns */ 830 int ret; 831 832 scl_high = div64_u64((u64)scl_high * ref, 1000000000) - 5; 833 scl_low = div64_u64((u64)scl_low * ref, 1000000000) - 5; 834 835 ret = ub953_write(priv, UB953_REG_SCL_HIGH_TIME, scl_high); 836 if (ret) 837 return ret; 838 839 ret = ub953_write(priv, UB953_REG_SCL_LOW_TIME, scl_low); 840 if (ret) 841 return ret; 842 843 return 0; 844 } 845 846 static u64 ub953_get_fc_rate(struct ub953_data *priv) 847 { 848 switch (priv->mode) { 849 case UB953_MODE_SYNC: 850 if (priv->hw_data->is_ub971) 851 return priv->plat_data->bc_rate * 160ull; 852 else 853 return priv->plat_data->bc_rate / 2 * 160ull; 854 855 case UB953_MODE_NONSYNC_EXT: 856 /* CLKIN_DIV = 1 always */ 857 return clk_get_rate(priv->clkin) * 80ull; 858 859 default: 860 /* Not supported */ 861 return 0; 862 } 863 } 864 865 static unsigned long ub953_calc_clkout_ub953(struct ub953_data *priv, 866 unsigned long target, u64 fc, 867 u8 *hs_div, u8 *m, u8 *n) 868 { 869 /* 870 * We always use 4 as a pre-divider (HS_CLK_DIV = 2). 871 * 872 * According to the datasheet: 873 * - "HS_CLK_DIV typically should be set to either 16, 8, or 4 (default)." 874 * - "if it is not possible to have an integer ratio of N/M, it is best to 875 * select a smaller value for HS_CLK_DIV. 876 * 877 * For above reasons the default HS_CLK_DIV seems the best in the average 878 * case. Use always that value to keep the code simple. 879 */ 880 static const unsigned long hs_clk_div = 4; 881 882 u64 fc_divided; 883 unsigned long mul, div; 884 unsigned long res; 885 886 /* clkout = fc / hs_clk_div * m / n */ 887 888 fc_divided = div_u64(fc, hs_clk_div); 889 890 rational_best_approximation(target, fc_divided, (1 << 5) - 1, 891 (1 << 8) - 1, &mul, &div); 892 893 res = div_u64(fc_divided * mul, div); 894 895 *hs_div = hs_clk_div; 896 *m = mul; 897 *n = div; 898 899 return res; 900 } 901 902 static unsigned long ub953_calc_clkout_ub971(struct ub953_data *priv, 903 unsigned long target, u64 fc, 904 u8 *m, u8 *n) 905 { 906 u64 fc_divided; 907 unsigned long mul, div; 908 unsigned long res; 909 910 /* clkout = fc * m / (8 * n) */ 911 912 fc_divided = div_u64(fc, 8); 913 914 rational_best_approximation(target, fc_divided, (1 << 5) - 1, 915 (1 << 8) - 1, &mul, &div); 916 917 res = div_u64(fc_divided * mul, div); 918 919 *m = mul; 920 *n = div; 921 922 return res; 923 } 924 925 static void ub953_calc_clkout_params(struct ub953_data *priv, 926 unsigned long target_rate, 927 struct ub953_clkout_data *clkout_data) 928 { 929 struct device *dev = &priv->client->dev; 930 unsigned long clkout_rate; 931 u64 fc_rate; 932 933 fc_rate = ub953_get_fc_rate(priv); 934 935 if (priv->hw_data->is_ub971) { 936 u8 m, n; 937 938 clkout_rate = ub953_calc_clkout_ub971(priv, target_rate, 939 fc_rate, &m, &n); 940 941 clkout_data->m = m; 942 clkout_data->n = n; 943 944 dev_dbg(dev, "%s %llu * %u / (8 * %u) = %lu (requested %lu)", 945 __func__, fc_rate, m, n, clkout_rate, target_rate); 946 } else { 947 u8 hs_div, m, n; 948 949 clkout_rate = ub953_calc_clkout_ub953(priv, target_rate, 950 fc_rate, &hs_div, &m, &n); 951 952 clkout_data->hs_div = hs_div; 953 clkout_data->m = m; 954 clkout_data->n = n; 955 956 dev_dbg(dev, "%s %llu / %u * %u / %u = %lu (requested %lu)", 957 __func__, fc_rate, hs_div, m, n, clkout_rate, 958 target_rate); 959 } 960 961 clkout_data->rate = clkout_rate; 962 } 963 964 static void ub953_write_clkout_regs(struct ub953_data *priv, 965 const struct ub953_clkout_data *clkout_data) 966 { 967 u8 clkout_ctrl0, clkout_ctrl1; 968 969 if (priv->hw_data->is_ub971) 970 clkout_ctrl0 = clkout_data->m; 971 else 972 clkout_ctrl0 = (__ffs(clkout_data->hs_div) << 5) | 973 clkout_data->m; 974 975 clkout_ctrl1 = clkout_data->n; 976 977 ub953_write(priv, UB953_REG_CLKOUT_CTRL0, clkout_ctrl0); 978 ub953_write(priv, UB953_REG_CLKOUT_CTRL1, clkout_ctrl1); 979 } 980 981 static unsigned long ub953_clkout_recalc_rate(struct clk_hw *hw, 982 unsigned long parent_rate) 983 { 984 struct ub953_data *priv = container_of(hw, struct ub953_data, clkout_clk_hw); 985 struct device *dev = &priv->client->dev; 986 u8 ctrl0, ctrl1; 987 u32 mul, div; 988 u64 fc_rate; 989 u32 hs_clk_div; 990 u64 rate; 991 int ret; 992 993 ret = ub953_read(priv, UB953_REG_CLKOUT_CTRL0, &ctrl0); 994 if (ret) { 995 dev_err(dev, "Failed to read CLKOUT_CTRL0: %d\n", ret); 996 return 0; 997 } 998 999 ret = ub953_read(priv, UB953_REG_CLKOUT_CTRL1, &ctrl1); 1000 if (ret) { 1001 dev_err(dev, "Failed to read CLKOUT_CTRL1: %d\n", ret); 1002 return 0; 1003 } 1004 1005 fc_rate = ub953_get_fc_rate(priv); 1006 1007 if (priv->hw_data->is_ub971) { 1008 mul = ctrl0 & 0x1f; 1009 div = ctrl1; 1010 1011 if (div == 0) 1012 return 0; 1013 1014 rate = div_u64(fc_rate * mul, 8 * div); 1015 1016 dev_dbg(dev, "clkout: fc rate %llu, mul %u, div %u = %llu\n", 1017 fc_rate, mul, div, rate); 1018 } else { 1019 mul = ctrl0 & 0x1f; 1020 hs_clk_div = 1 << (ctrl0 >> 5); 1021 div = ctrl1; 1022 1023 if (div == 0) 1024 return 0; 1025 1026 rate = div_u64(div_u64(fc_rate, hs_clk_div) * mul, div); 1027 1028 dev_dbg(dev, 1029 "clkout: fc rate %llu, hs_clk_div %u, mul %u, div %u = %llu\n", 1030 fc_rate, hs_clk_div, mul, div, rate); 1031 } 1032 1033 return rate; 1034 } 1035 1036 static long ub953_clkout_round_rate(struct clk_hw *hw, unsigned long rate, 1037 unsigned long *parent_rate) 1038 { 1039 struct ub953_data *priv = container_of(hw, struct ub953_data, clkout_clk_hw); 1040 struct ub953_clkout_data clkout_data; 1041 1042 ub953_calc_clkout_params(priv, rate, &clkout_data); 1043 1044 return clkout_data.rate; 1045 } 1046 1047 static int ub953_clkout_set_rate(struct clk_hw *hw, unsigned long rate, 1048 unsigned long parent_rate) 1049 { 1050 struct ub953_data *priv = container_of(hw, struct ub953_data, clkout_clk_hw); 1051 struct ub953_clkout_data clkout_data; 1052 1053 ub953_calc_clkout_params(priv, rate, &clkout_data); 1054 1055 dev_dbg(&priv->client->dev, "%s %lu (requested %lu)\n", __func__, 1056 clkout_data.rate, rate); 1057 1058 ub953_write_clkout_regs(priv, &clkout_data); 1059 1060 return 0; 1061 } 1062 1063 static const struct clk_ops ub953_clkout_ops = { 1064 .recalc_rate = ub953_clkout_recalc_rate, 1065 .round_rate = ub953_clkout_round_rate, 1066 .set_rate = ub953_clkout_set_rate, 1067 }; 1068 1069 static int ub953_register_clkout(struct ub953_data *priv) 1070 { 1071 struct device *dev = &priv->client->dev; 1072 const struct clk_init_data init = { 1073 .name = kasprintf(GFP_KERNEL, "ds90%s.%s.clk_out", 1074 priv->hw_data->model, dev_name(dev)), 1075 .ops = &ub953_clkout_ops, 1076 }; 1077 struct ub953_clkout_data clkout_data; 1078 int ret; 1079 1080 if (!init.name) 1081 return -ENOMEM; 1082 1083 /* Initialize clkout to 25MHz by default */ 1084 ub953_calc_clkout_params(priv, UB953_DEFAULT_CLKOUT_RATE, &clkout_data); 1085 ub953_write_clkout_regs(priv, &clkout_data); 1086 1087 priv->clkout_clk_hw.init = &init; 1088 1089 ret = devm_clk_hw_register(dev, &priv->clkout_clk_hw); 1090 kfree(init.name); 1091 if (ret) 1092 return dev_err_probe(dev, ret, "Cannot register clock HW\n"); 1093 1094 ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, 1095 &priv->clkout_clk_hw); 1096 if (ret) 1097 return dev_err_probe(dev, ret, 1098 "Cannot add OF clock provider\n"); 1099 1100 return 0; 1101 } 1102 1103 static int ub953_add_i2c_adapter(struct ub953_data *priv) 1104 { 1105 struct device *dev = &priv->client->dev; 1106 struct fwnode_handle *i2c_handle; 1107 int ret; 1108 1109 i2c_handle = device_get_named_child_node(dev, "i2c"); 1110 if (!i2c_handle) 1111 return 0; 1112 1113 ret = i2c_atr_add_adapter(priv->plat_data->atr, priv->plat_data->port, 1114 dev, i2c_handle); 1115 1116 fwnode_handle_put(i2c_handle); 1117 1118 if (ret) 1119 return ret; 1120 1121 return 0; 1122 } 1123 1124 static const struct regmap_config ub953_regmap_config = { 1125 .name = "ds90ub953", 1126 .reg_bits = 8, 1127 .val_bits = 8, 1128 .reg_format_endian = REGMAP_ENDIAN_DEFAULT, 1129 .val_format_endian = REGMAP_ENDIAN_DEFAULT, 1130 }; 1131 1132 static int ub953_parse_dt(struct ub953_data *priv) 1133 { 1134 struct device *dev = &priv->client->dev; 1135 struct v4l2_fwnode_endpoint vep = { 1136 .bus_type = V4L2_MBUS_CSI2_DPHY, 1137 }; 1138 struct fwnode_handle *ep_fwnode; 1139 unsigned char nlanes; 1140 int ret; 1141 1142 ep_fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), 1143 UB953_PAD_SINK, 0, 0); 1144 if (!ep_fwnode) 1145 return dev_err_probe(dev, -ENOENT, "no endpoint found\n"); 1146 1147 ret = v4l2_fwnode_endpoint_parse(ep_fwnode, &vep); 1148 1149 fwnode_handle_put(ep_fwnode); 1150 1151 if (ret) 1152 return dev_err_probe(dev, ret, 1153 "failed to parse sink endpoint data\n"); 1154 1155 nlanes = vep.bus.mipi_csi2.num_data_lanes; 1156 if (nlanes != 1 && nlanes != 2 && nlanes != 4) 1157 return dev_err_probe(dev, -EINVAL, 1158 "bad number of data-lanes: %u\n", nlanes); 1159 1160 priv->num_data_lanes = nlanes; 1161 1162 priv->non_continous_clk = vep.bus.mipi_csi2.flags & 1163 V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK; 1164 1165 return 0; 1166 } 1167 1168 static int ub953_hw_init(struct ub953_data *priv) 1169 { 1170 struct device *dev = &priv->client->dev; 1171 bool mode_override; 1172 int ret; 1173 u8 v; 1174 1175 ret = ub953_read(priv, UB953_REG_MODE_SEL, &v); 1176 if (ret) 1177 return ret; 1178 1179 if (!(v & UB953_REG_MODE_SEL_MODE_DONE)) 1180 return dev_err_probe(dev, -EIO, "Mode value not stabilized\n"); 1181 1182 mode_override = v & UB953_REG_MODE_SEL_MODE_OVERRIDE; 1183 1184 switch (v & UB953_REG_MODE_SEL_MODE_MASK) { 1185 case 0: 1186 priv->mode = UB953_MODE_SYNC; 1187 break; 1188 case 2: 1189 priv->mode = UB953_MODE_NONSYNC_EXT; 1190 break; 1191 case 3: 1192 priv->mode = UB953_MODE_NONSYNC_INT; 1193 break; 1194 case 5: 1195 priv->mode = UB953_MODE_DVP; 1196 break; 1197 default: 1198 return dev_err_probe(dev, -EIO, 1199 "Invalid mode in mode register\n"); 1200 } 1201 1202 dev_dbg(dev, "mode from %s: %#x\n", mode_override ? "reg" : "strap", 1203 priv->mode); 1204 1205 if (priv->mode != UB953_MODE_SYNC && 1206 priv->mode != UB953_MODE_NONSYNC_EXT) 1207 return dev_err_probe(dev, -ENODEV, 1208 "Unsupported mode selected: %u\n", 1209 priv->mode); 1210 1211 if (priv->mode == UB953_MODE_NONSYNC_EXT && !priv->clkin) 1212 return dev_err_probe(dev, -EINVAL, 1213 "clkin required for non-sync ext mode\n"); 1214 1215 ret = ub953_read(priv, UB953_REG_REV_MASK_ID, &v); 1216 if (ret) 1217 return dev_err_probe(dev, ret, "Failed to read revision"); 1218 1219 dev_info(dev, "Found %s rev/mask %#04x\n", priv->hw_data->model, v); 1220 1221 ret = ub953_read(priv, UB953_REG_GENERAL_CFG, &v); 1222 if (ret) 1223 return ret; 1224 1225 dev_dbg(dev, "i2c strap setting %s V\n", 1226 (v & UB953_REG_GENERAL_CFG_I2C_STRAP_MODE) ? "1.8" : "3.3"); 1227 1228 ret = ub953_i2c_master_init(priv); 1229 if (ret) 1230 return dev_err_probe(dev, ret, "i2c init failed\n"); 1231 1232 ub953_write(priv, UB953_REG_GENERAL_CFG, 1233 (priv->non_continous_clk ? 0 : UB953_REG_GENERAL_CFG_CONT_CLK) | 1234 ((priv->num_data_lanes - 1) << UB953_REG_GENERAL_CFG_CSI_LANE_SEL_SHIFT) | 1235 UB953_REG_GENERAL_CFG_CRC_TX_GEN_ENABLE); 1236 1237 return 0; 1238 } 1239 1240 static int ub953_subdev_init(struct ub953_data *priv) 1241 { 1242 struct device *dev = &priv->client->dev; 1243 int ret; 1244 1245 v4l2_i2c_subdev_init(&priv->sd, priv->client, &ub953_subdev_ops); 1246 priv->sd.internal_ops = &ub953_internal_ops; 1247 1248 priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | 1249 V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_STREAMS; 1250 priv->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; 1251 priv->sd.entity.ops = &ub953_entity_ops; 1252 1253 priv->pads[0].flags = MEDIA_PAD_FL_SINK; 1254 priv->pads[1].flags = MEDIA_PAD_FL_SOURCE; 1255 1256 ret = media_entity_pads_init(&priv->sd.entity, 2, priv->pads); 1257 if (ret) 1258 return dev_err_probe(dev, ret, "Failed to init pads\n"); 1259 1260 ret = v4l2_subdev_init_finalize(&priv->sd); 1261 if (ret) 1262 goto err_entity_cleanup; 1263 1264 ret = ub953_v4l2_notifier_register(priv); 1265 if (ret) { 1266 dev_err_probe(dev, ret, 1267 "v4l2 subdev notifier register failed\n"); 1268 goto err_free_state; 1269 } 1270 1271 ret = v4l2_async_register_subdev(&priv->sd); 1272 if (ret) { 1273 dev_err_probe(dev, ret, "v4l2_async_register_subdev error\n"); 1274 goto err_unreg_notif; 1275 } 1276 1277 return 0; 1278 1279 err_unreg_notif: 1280 ub953_v4l2_notifier_unregister(priv); 1281 err_free_state: 1282 v4l2_subdev_cleanup(&priv->sd); 1283 err_entity_cleanup: 1284 media_entity_cleanup(&priv->sd.entity); 1285 1286 return ret; 1287 } 1288 1289 static void ub953_subdev_uninit(struct ub953_data *priv) 1290 { 1291 v4l2_async_unregister_subdev(&priv->sd); 1292 ub953_v4l2_notifier_unregister(priv); 1293 v4l2_subdev_cleanup(&priv->sd); 1294 fwnode_handle_put(priv->sd.fwnode); 1295 media_entity_cleanup(&priv->sd.entity); 1296 } 1297 1298 static int ub953_probe(struct i2c_client *client) 1299 { 1300 struct device *dev = &client->dev; 1301 struct ub953_data *priv; 1302 int ret; 1303 1304 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); 1305 if (!priv) 1306 return -ENOMEM; 1307 1308 priv->client = client; 1309 1310 priv->hw_data = device_get_match_data(dev); 1311 1312 priv->plat_data = dev_get_platdata(&client->dev); 1313 if (!priv->plat_data) 1314 return dev_err_probe(dev, -ENODEV, "Platform data missing\n"); 1315 1316 mutex_init(&priv->reg_lock); 1317 1318 /* 1319 * Initialize to invalid values so that the first reg writes will 1320 * configure the target. 1321 */ 1322 priv->current_indirect_target = 0xff; 1323 1324 priv->regmap = devm_regmap_init_i2c(client, &ub953_regmap_config); 1325 if (IS_ERR(priv->regmap)) { 1326 ret = PTR_ERR(priv->regmap); 1327 dev_err_probe(dev, ret, "Failed to init regmap\n"); 1328 goto err_mutex_destroy; 1329 } 1330 1331 priv->clkin = devm_clk_get_optional(dev, "clkin"); 1332 if (IS_ERR(priv->clkin)) { 1333 ret = PTR_ERR(priv->clkin); 1334 dev_err_probe(dev, ret, "failed to parse 'clkin'\n"); 1335 goto err_mutex_destroy; 1336 } 1337 1338 ret = ub953_parse_dt(priv); 1339 if (ret) 1340 goto err_mutex_destroy; 1341 1342 ret = ub953_hw_init(priv); 1343 if (ret) 1344 goto err_mutex_destroy; 1345 1346 ret = ub953_gpiochip_probe(priv); 1347 if (ret) { 1348 dev_err_probe(dev, ret, "Failed to init gpiochip\n"); 1349 goto err_mutex_destroy; 1350 } 1351 1352 ret = ub953_register_clkout(priv); 1353 if (ret) { 1354 dev_err_probe(dev, ret, "Failed to register clkout\n"); 1355 goto err_gpiochip_remove; 1356 } 1357 1358 ret = ub953_subdev_init(priv); 1359 if (ret) 1360 goto err_gpiochip_remove; 1361 1362 ret = ub953_add_i2c_adapter(priv); 1363 if (ret) { 1364 dev_err_probe(dev, ret, "failed to add remote i2c adapter\n"); 1365 goto err_subdev_uninit; 1366 } 1367 1368 return 0; 1369 1370 err_subdev_uninit: 1371 ub953_subdev_uninit(priv); 1372 err_gpiochip_remove: 1373 ub953_gpiochip_remove(priv); 1374 err_mutex_destroy: 1375 mutex_destroy(&priv->reg_lock); 1376 1377 return ret; 1378 } 1379 1380 static void ub953_remove(struct i2c_client *client) 1381 { 1382 struct v4l2_subdev *sd = i2c_get_clientdata(client); 1383 struct ub953_data *priv = sd_to_ub953(sd); 1384 1385 i2c_atr_del_adapter(priv->plat_data->atr, priv->plat_data->port); 1386 1387 ub953_subdev_uninit(priv); 1388 1389 ub953_gpiochip_remove(priv); 1390 mutex_destroy(&priv->reg_lock); 1391 } 1392 1393 static const struct ub953_hw_data ds90ub953_hw = { 1394 .model = "ub953", 1395 }; 1396 1397 static const struct ub953_hw_data ds90ub971_hw = { 1398 .model = "ub971", 1399 .is_ub971 = true, 1400 }; 1401 1402 static const struct i2c_device_id ub953_id[] = { 1403 { "ds90ub953-q1", (kernel_ulong_t)&ds90ub953_hw }, 1404 { "ds90ub971-q1", (kernel_ulong_t)&ds90ub971_hw }, 1405 {} 1406 }; 1407 MODULE_DEVICE_TABLE(i2c, ub953_id); 1408 1409 static const struct of_device_id ub953_dt_ids[] = { 1410 { .compatible = "ti,ds90ub953-q1", .data = &ds90ub953_hw }, 1411 { .compatible = "ti,ds90ub971-q1", .data = &ds90ub971_hw }, 1412 {} 1413 }; 1414 MODULE_DEVICE_TABLE(of, ub953_dt_ids); 1415 1416 static struct i2c_driver ds90ub953_driver = { 1417 .probe = ub953_probe, 1418 .remove = ub953_remove, 1419 .id_table = ub953_id, 1420 .driver = { 1421 .name = "ds90ub953", 1422 .of_match_table = ub953_dt_ids, 1423 }, 1424 }; 1425 module_i2c_driver(ds90ub953_driver); 1426 1427 MODULE_LICENSE("GPL"); 1428 MODULE_DESCRIPTION("Texas Instruments FPD-Link III/IV CSI-2 Serializers Driver"); 1429 MODULE_AUTHOR("Luca Ceresoli <luca@lucaceresoli.net>"); 1430 MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>"); 1431 MODULE_IMPORT_NS(I2C_ATR); 1432