1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 bt866 - BT866 Digital Video Encoder (Rockwell Part) 4 5 Copyright (C) 1999 Mike Bernson <mike@mlb.org> 6 Copyright (C) 1998 Dave Perks <dperks@ibm.net> 7 8 Modifications for LML33/DC10plus unified driver 9 Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx> 10 11 This code was modify/ported from the saa7111 driver written 12 by Dave Perks. 13 14 This code was adapted for the bt866 by Christer Weinigel and ported 15 to 2.6 by Martin Samuelsson. 16 17 */ 18 19 #include <linux/module.h> 20 #include <linux/types.h> 21 #include <linux/slab.h> 22 #include <linux/ioctl.h> 23 #include <linux/uaccess.h> 24 #include <linux/i2c.h> 25 #include <linux/videodev2.h> 26 #include <media/v4l2-device.h> 27 28 MODULE_DESCRIPTION("Brooktree-866 video encoder driver"); 29 MODULE_AUTHOR("Mike Bernson & Dave Perks"); 30 MODULE_LICENSE("GPL"); 31 32 static int debug; 33 module_param(debug, int, 0); 34 MODULE_PARM_DESC(debug, "Debug level (0-1)"); 35 36 37 /* ----------------------------------------------------------------------- */ 38 39 struct bt866 { 40 struct v4l2_subdev sd; 41 u8 reg[256]; 42 }; 43 44 static inline struct bt866 *to_bt866(struct v4l2_subdev *sd) 45 { 46 return container_of(sd, struct bt866, sd); 47 } 48 49 static int bt866_write(struct bt866 *encoder, u8 subaddr, u8 data) 50 { 51 struct i2c_client *client = v4l2_get_subdevdata(&encoder->sd); 52 u8 buffer[2]; 53 int err; 54 55 buffer[0] = subaddr; 56 buffer[1] = data; 57 58 encoder->reg[subaddr] = data; 59 60 v4l_dbg(1, debug, client, "write 0x%02x = 0x%02x\n", subaddr, data); 61 62 for (err = 0; err < 3;) { 63 if (i2c_master_send(client, buffer, 2) == 2) 64 break; 65 err++; 66 v4l_warn(client, "error #%d writing to 0x%02x\n", 67 err, subaddr); 68 schedule_timeout_interruptible(msecs_to_jiffies(100)); 69 } 70 if (err == 3) { 71 v4l_warn(client, "giving up\n"); 72 return -1; 73 } 74 75 return 0; 76 } 77 78 static int bt866_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) 79 { 80 v4l2_dbg(1, debug, sd, "set norm %llx\n", (unsigned long long)std); 81 82 /* Only PAL supported by this driver at the moment! */ 83 if (!(std & V4L2_STD_NTSC)) 84 return -EINVAL; 85 return 0; 86 } 87 88 static int bt866_s_routing(struct v4l2_subdev *sd, 89 u32 input, u32 output, u32 config) 90 { 91 static const __u8 init[] = { 92 0xc8, 0xcc, /* CRSCALE */ 93 0xca, 0x91, /* CBSCALE */ 94 0xcc, 0x24, /* YC16 | OSDNUM */ 95 0xda, 0x00, /* */ 96 0xdc, 0x24, /* SETMODE | PAL */ 97 0xde, 0x02, /* EACTIVE */ 98 99 /* overlay colors */ 100 0x70, 0xEB, 0x90, 0x80, 0xB0, 0x80, /* white */ 101 0x72, 0xA2, 0x92, 0x8E, 0xB2, 0x2C, /* yellow */ 102 0x74, 0x83, 0x94, 0x2C, 0xB4, 0x9C, /* cyan */ 103 0x76, 0x70, 0x96, 0x3A, 0xB6, 0x48, /* green */ 104 0x78, 0x54, 0x98, 0xC6, 0xB8, 0xB8, /* magenta */ 105 0x7A, 0x41, 0x9A, 0xD4, 0xBA, 0x64, /* red */ 106 0x7C, 0x23, 0x9C, 0x72, 0xBC, 0xD4, /* blue */ 107 0x7E, 0x10, 0x9E, 0x80, 0xBE, 0x80, /* black */ 108 109 0x60, 0xEB, 0x80, 0x80, 0xc0, 0x80, /* white */ 110 0x62, 0xA2, 0x82, 0x8E, 0xc2, 0x2C, /* yellow */ 111 0x64, 0x83, 0x84, 0x2C, 0xc4, 0x9C, /* cyan */ 112 0x66, 0x70, 0x86, 0x3A, 0xc6, 0x48, /* green */ 113 0x68, 0x54, 0x88, 0xC6, 0xc8, 0xB8, /* magenta */ 114 0x6A, 0x41, 0x8A, 0xD4, 0xcA, 0x64, /* red */ 115 0x6C, 0x23, 0x8C, 0x72, 0xcC, 0xD4, /* blue */ 116 0x6E, 0x10, 0x8E, 0x80, 0xcE, 0x80, /* black */ 117 }; 118 struct bt866 *encoder = to_bt866(sd); 119 u8 val; 120 int i; 121 122 for (i = 0; i < ARRAY_SIZE(init) / 2; i += 2) 123 bt866_write(encoder, init[i], init[i+1]); 124 125 val = encoder->reg[0xdc]; 126 127 if (input == 0) 128 val |= 0x40; /* CBSWAP */ 129 else 130 val &= ~0x40; /* !CBSWAP */ 131 132 bt866_write(encoder, 0xdc, val); 133 134 val = encoder->reg[0xcc]; 135 if (input == 2) 136 val |= 0x01; /* OSDBAR */ 137 else 138 val &= ~0x01; /* !OSDBAR */ 139 bt866_write(encoder, 0xcc, val); 140 141 v4l2_dbg(1, debug, sd, "set input %d\n", input); 142 143 switch (input) { 144 case 0: 145 case 1: 146 case 2: 147 break; 148 default: 149 return -EINVAL; 150 } 151 return 0; 152 } 153 154 #if 0 155 /* Code to setup square pixels, might be of some use in the future, 156 but is currently unused. */ 157 val = encoder->reg[0xdc]; 158 if (*iarg) 159 val |= 1; /* SQUARE */ 160 else 161 val &= ~1; /* !SQUARE */ 162 bt866_write(client, 0xdc, val); 163 #endif 164 165 /* ----------------------------------------------------------------------- */ 166 167 static const struct v4l2_subdev_video_ops bt866_video_ops = { 168 .s_std_output = bt866_s_std_output, 169 .s_routing = bt866_s_routing, 170 }; 171 172 static const struct v4l2_subdev_ops bt866_ops = { 173 .video = &bt866_video_ops, 174 }; 175 176 static int bt866_probe(struct i2c_client *client) 177 { 178 struct bt866 *encoder; 179 struct v4l2_subdev *sd; 180 181 v4l_info(client, "chip found @ 0x%x (%s)\n", 182 client->addr << 1, client->adapter->name); 183 184 encoder = devm_kzalloc(&client->dev, sizeof(*encoder), GFP_KERNEL); 185 if (encoder == NULL) 186 return -ENOMEM; 187 sd = &encoder->sd; 188 v4l2_i2c_subdev_init(sd, client, &bt866_ops); 189 return 0; 190 } 191 192 static void bt866_remove(struct i2c_client *client) 193 { 194 struct v4l2_subdev *sd = i2c_get_clientdata(client); 195 196 v4l2_device_unregister_subdev(sd); 197 } 198 199 static const struct i2c_device_id bt866_id[] = { 200 { "bt866" }, 201 { } 202 }; 203 MODULE_DEVICE_TABLE(i2c, bt866_id); 204 205 static struct i2c_driver bt866_driver = { 206 .driver = { 207 .name = "bt866", 208 }, 209 .probe = bt866_probe, 210 .remove = bt866_remove, 211 .id_table = bt866_id, 212 }; 213 214 module_i2c_driver(bt866_driver); 215