xref: /linux/drivers/media/dvb-frontends/s921.c (revision 08b7174fb8d126e607e385e34b9e1da4f3be274f)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  *   Sharp VA3A5JZ921 One Seg Broadcast Module driver
4  *   This device is labeled as just S. 921 at the top of the frontend can
5  *
6  *   Copyright (C) 2009-2010 Mauro Carvalho Chehab
7  *   Copyright (C) 2009-2010 Douglas Landgraf <dougsland@redhat.com>
8  *
9  *   Developed for Leadership SBTVD 1seg device sold in Brazil
10  *
11  *   Frontend module based on cx24123 driver, getting some info from
12  *	the old s921 driver.
13  *
14  *   FIXME: Need to port to DVB v5.2 API
15  */
16 
17 #include <linux/kernel.h>
18 #include <asm/div64.h>
19 
20 #include <media/dvb_frontend.h>
21 #include "s921.h"
22 
23 static int debug = 1;
24 module_param(debug, int, 0644);
25 MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
26 
27 #define rc(args...)  do {						\
28 	printk(KERN_ERR  "s921: " args);				\
29 } while (0)
30 
31 #define dprintk(args...)						\
32 	do {								\
33 		if (debug) {						\
34 			printk(KERN_DEBUG "s921: %s: ", __func__);	\
35 			printk(args);					\
36 		}							\
37 	} while (0)
38 
39 struct s921_state {
40 	struct i2c_adapter *i2c;
41 	const struct s921_config *config;
42 
43 	struct dvb_frontend frontend;
44 
45 	/* The Demod can't easily provide these, we cache them */
46 	u32 currentfreq;
47 };
48 
49 /*
50  * Various tuner defaults need to be established for a given frequency kHz.
51  * fixme: The bounds on the bands do not match the doc in real life.
52  * fixme: Some of them have been moved, other might need adjustment.
53  */
54 static struct s921_bandselect_val {
55 	u32 freq_low;
56 	u8  band_reg;
57 } s921_bandselect[] = {
58 	{         0, 0x7b },
59 	{ 485140000, 0x5b },
60 	{ 515140000, 0x3b },
61 	{ 545140000, 0x1b },
62 	{ 599140000, 0xfb },
63 	{ 623140000, 0xdb },
64 	{ 659140000, 0xbb },
65 	{ 713140000, 0x9b },
66 };
67 
68 struct regdata {
69 	u8 reg;
70 	u8 data;
71 };
72 
73 static struct regdata s921_init[] = {
74 	{ 0x01, 0x80 },		/* Probably, a reset sequence */
75 	{ 0x01, 0x40 },
76 	{ 0x01, 0x80 },
77 	{ 0x01, 0x40 },
78 
79 	{ 0x02, 0x00 },
80 	{ 0x03, 0x40 },
81 	{ 0x04, 0x01 },
82 	{ 0x05, 0x00 },
83 	{ 0x06, 0x00 },
84 	{ 0x07, 0x00 },
85 	{ 0x08, 0x00 },
86 	{ 0x09, 0x00 },
87 	{ 0x0a, 0x00 },
88 	{ 0x0b, 0x5a },
89 	{ 0x0c, 0x00 },
90 	{ 0x0d, 0x00 },
91 	{ 0x0f, 0x00 },
92 	{ 0x13, 0x1b },
93 	{ 0x14, 0x80 },
94 	{ 0x15, 0x40 },
95 	{ 0x17, 0x70 },
96 	{ 0x18, 0x01 },
97 	{ 0x19, 0x12 },
98 	{ 0x1a, 0x01 },
99 	{ 0x1b, 0x12 },
100 	{ 0x1c, 0xa0 },
101 	{ 0x1d, 0x00 },
102 	{ 0x1e, 0x0a },
103 	{ 0x1f, 0x08 },
104 	{ 0x20, 0x40 },
105 	{ 0x21, 0xff },
106 	{ 0x22, 0x4c },
107 	{ 0x23, 0x4e },
108 	{ 0x24, 0x4c },
109 	{ 0x25, 0x00 },
110 	{ 0x26, 0x00 },
111 	{ 0x27, 0xf4 },
112 	{ 0x28, 0x60 },
113 	{ 0x29, 0x88 },
114 	{ 0x2a, 0x40 },
115 	{ 0x2b, 0x40 },
116 	{ 0x2c, 0xff },
117 	{ 0x2d, 0x00 },
118 	{ 0x2e, 0xff },
119 	{ 0x2f, 0x00 },
120 	{ 0x30, 0x20 },
121 	{ 0x31, 0x06 },
122 	{ 0x32, 0x0c },
123 	{ 0x34, 0x0f },
124 	{ 0x37, 0xfe },
125 	{ 0x38, 0x00 },
126 	{ 0x39, 0x63 },
127 	{ 0x3a, 0x10 },
128 	{ 0x3b, 0x10 },
129 	{ 0x47, 0x00 },
130 	{ 0x49, 0xe5 },
131 	{ 0x4b, 0x00 },
132 	{ 0x50, 0xc0 },
133 	{ 0x52, 0x20 },
134 	{ 0x54, 0x5a },
135 	{ 0x55, 0x5b },
136 	{ 0x56, 0x40 },
137 	{ 0x57, 0x70 },
138 	{ 0x5c, 0x50 },
139 	{ 0x5d, 0x00 },
140 	{ 0x62, 0x17 },
141 	{ 0x63, 0x2f },
142 	{ 0x64, 0x6f },
143 	{ 0x68, 0x00 },
144 	{ 0x69, 0x89 },
145 	{ 0x6a, 0x00 },
146 	{ 0x6b, 0x00 },
147 	{ 0x6c, 0x00 },
148 	{ 0x6d, 0x00 },
149 	{ 0x6e, 0x00 },
150 	{ 0x70, 0x10 },
151 	{ 0x71, 0x00 },
152 	{ 0x75, 0x00 },
153 	{ 0x76, 0x30 },
154 	{ 0x77, 0x01 },
155 	{ 0xaf, 0x00 },
156 	{ 0xb0, 0xa0 },
157 	{ 0xb2, 0x3d },
158 	{ 0xb3, 0x25 },
159 	{ 0xb4, 0x8b },
160 	{ 0xb5, 0x4b },
161 	{ 0xb6, 0x3f },
162 	{ 0xb7, 0xff },
163 	{ 0xb8, 0xff },
164 	{ 0xb9, 0xfc },
165 	{ 0xba, 0x00 },
166 	{ 0xbb, 0x00 },
167 	{ 0xbc, 0x00 },
168 	{ 0xd0, 0x30 },
169 	{ 0xe4, 0x84 },
170 	{ 0xf0, 0x48 },
171 	{ 0xf1, 0x19 },
172 	{ 0xf2, 0x5a },
173 	{ 0xf3, 0x8e },
174 	{ 0xf4, 0x2d },
175 	{ 0xf5, 0x07 },
176 	{ 0xf6, 0x5a },
177 	{ 0xf7, 0xba },
178 	{ 0xf8, 0xd7 },
179 };
180 
181 static struct regdata s921_prefreq[] = {
182 	{ 0x47, 0x60 },
183 	{ 0x68, 0x00 },
184 	{ 0x69, 0x89 },
185 	{ 0xf0, 0x48 },
186 	{ 0xf1, 0x19 },
187 };
188 
189 static struct regdata s921_postfreq[] = {
190 	{ 0xf5, 0xae },
191 	{ 0xf6, 0xb7 },
192 	{ 0xf7, 0xba },
193 	{ 0xf8, 0xd7 },
194 	{ 0x68, 0x0a },
195 	{ 0x69, 0x09 },
196 };
197 
198 static int s921_i2c_writereg(struct s921_state *state,
199 			     u8 i2c_addr, int reg, int data)
200 {
201 	u8 buf[] = { reg, data };
202 	struct i2c_msg msg = {
203 		.addr = i2c_addr, .flags = 0, .buf = buf, .len = 2
204 	};
205 	int rc;
206 
207 	rc = i2c_transfer(state->i2c, &msg, 1);
208 	if (rc != 1) {
209 		printk("%s: writereg rcor(rc == %i, reg == 0x%02x, data == 0x%02x)\n",
210 		       __func__, rc, reg, data);
211 		return rc;
212 	}
213 
214 	return 0;
215 }
216 
217 static int s921_i2c_writeregdata(struct s921_state *state, u8 i2c_addr,
218 				 struct regdata *rd, int size)
219 {
220 	int i, rc;
221 
222 	for (i = 0; i < size; i++) {
223 		rc = s921_i2c_writereg(state, i2c_addr, rd[i].reg, rd[i].data);
224 		if (rc < 0)
225 			return rc;
226 	}
227 	return 0;
228 }
229 
230 static int s921_i2c_readreg(struct s921_state *state, u8 i2c_addr, u8 reg)
231 {
232 	u8 val;
233 	int rc;
234 	struct i2c_msg msg[] = {
235 		{ .addr = i2c_addr, .flags = 0, .buf = &reg, .len = 1 },
236 		{ .addr = i2c_addr, .flags = I2C_M_RD, .buf = &val, .len = 1 }
237 	};
238 
239 	rc = i2c_transfer(state->i2c, msg, 2);
240 
241 	if (rc != 2) {
242 		rc("%s: reg=0x%x (rcor=%d)\n", __func__, reg, rc);
243 		return rc;
244 	}
245 
246 	return val;
247 }
248 
249 #define s921_readreg(state, reg) \
250 	s921_i2c_readreg(state, state->config->demod_address, reg)
251 #define s921_writereg(state, reg, val) \
252 	s921_i2c_writereg(state, state->config->demod_address, reg, val)
253 #define s921_writeregdata(state, regdata) \
254 	s921_i2c_writeregdata(state, state->config->demod_address, \
255 	regdata, ARRAY_SIZE(regdata))
256 
257 static int s921_pll_tune(struct dvb_frontend *fe)
258 {
259 	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
260 	struct s921_state *state = fe->demodulator_priv;
261 	int band, rc, i;
262 	unsigned long f_offset;
263 	u8 f_switch;
264 	u64 offset;
265 
266 	dprintk("frequency=%i\n", p->frequency);
267 
268 	for (band = 0; band < ARRAY_SIZE(s921_bandselect); band++)
269 		if (p->frequency < s921_bandselect[band].freq_low)
270 			break;
271 	band--;
272 
273 	if (band < 0) {
274 		rc("%s: frequency out of range\n", __func__);
275 		return -EINVAL;
276 	}
277 
278 	f_switch = s921_bandselect[band].band_reg;
279 
280 	offset = ((u64)p->frequency) * 258;
281 	do_div(offset, 6000000);
282 	f_offset = ((unsigned long)offset) + 2321;
283 
284 	rc = s921_writeregdata(state, s921_prefreq);
285 	if (rc < 0)
286 		return rc;
287 
288 	rc = s921_writereg(state, 0xf2, (f_offset >> 8) & 0xff);
289 	if (rc < 0)
290 		return rc;
291 
292 	rc = s921_writereg(state, 0xf3, f_offset & 0xff);
293 	if (rc < 0)
294 		return rc;
295 
296 	rc = s921_writereg(state, 0xf4, f_switch);
297 	if (rc < 0)
298 		return rc;
299 
300 	rc = s921_writeregdata(state, s921_postfreq);
301 	if (rc < 0)
302 		return rc;
303 
304 	for (i = 0 ; i < 6; i++) {
305 		rc = s921_readreg(state, 0x80);
306 		dprintk("status 0x80: %02x\n", rc);
307 	}
308 	rc = s921_writereg(state, 0x01, 0x40);
309 	if (rc < 0)
310 		return rc;
311 
312 	rc = s921_readreg(state, 0x01);
313 	dprintk("status 0x01: %02x\n", rc);
314 
315 	rc = s921_readreg(state, 0x80);
316 	dprintk("status 0x80: %02x\n", rc);
317 
318 	rc = s921_readreg(state, 0x80);
319 	dprintk("status 0x80: %02x\n", rc);
320 
321 	rc = s921_readreg(state, 0x32);
322 	dprintk("status 0x32: %02x\n", rc);
323 
324 	dprintk("pll tune band=%d, pll=%d\n", f_switch, (int)f_offset);
325 
326 	return 0;
327 }
328 
329 static int s921_initfe(struct dvb_frontend *fe)
330 {
331 	struct s921_state *state = fe->demodulator_priv;
332 	int rc;
333 
334 	dprintk("\n");
335 
336 	rc = s921_writeregdata(state, s921_init);
337 	if (rc < 0)
338 		return rc;
339 
340 	return 0;
341 }
342 
343 static int s921_read_status(struct dvb_frontend *fe, enum fe_status *status)
344 {
345 	struct s921_state *state = fe->demodulator_priv;
346 	int regstatus, rc;
347 
348 	*status = 0;
349 
350 	rc = s921_readreg(state, 0x81);
351 	if (rc < 0)
352 		return rc;
353 
354 	regstatus = rc << 8;
355 
356 	rc = s921_readreg(state, 0x82);
357 	if (rc < 0)
358 		return rc;
359 
360 	regstatus |= rc;
361 
362 	dprintk("status = %04x\n", regstatus);
363 
364 	/* Full Sync - We don't know what each bit means on regs 0x81/0x82 */
365 	if ((regstatus & 0xff) == 0x40) {
366 		*status = FE_HAS_SIGNAL  |
367 			  FE_HAS_CARRIER |
368 			  FE_HAS_VITERBI |
369 			  FE_HAS_SYNC    |
370 			  FE_HAS_LOCK;
371 	} else if (regstatus & 0x40) {
372 		/* This is close to Full Sync, but not enough to get useful info */
373 		*status = FE_HAS_SIGNAL  |
374 			  FE_HAS_CARRIER |
375 			  FE_HAS_VITERBI |
376 			  FE_HAS_SYNC;
377 	}
378 
379 	return 0;
380 }
381 
382 static int s921_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
383 {
384 	enum fe_status	status;
385 	struct s921_state *state = fe->demodulator_priv;
386 	int rc;
387 
388 	/* FIXME: Use the proper register for it... 0x80? */
389 	rc = s921_read_status(fe, &status);
390 	if (rc < 0)
391 		return rc;
392 
393 	*strength = (status & FE_HAS_LOCK) ? 0xffff : 0;
394 
395 	dprintk("strength = 0x%04x\n", *strength);
396 
397 	rc = s921_readreg(state, 0x01);
398 	dprintk("status 0x01: %02x\n", rc);
399 
400 	rc = s921_readreg(state, 0x80);
401 	dprintk("status 0x80: %02x\n", rc);
402 
403 	rc = s921_readreg(state, 0x32);
404 	dprintk("status 0x32: %02x\n", rc);
405 
406 	return 0;
407 }
408 
409 static int s921_set_frontend(struct dvb_frontend *fe)
410 {
411 	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
412 	struct s921_state *state = fe->demodulator_priv;
413 	int rc;
414 
415 	dprintk("\n");
416 
417 	/* FIXME: We don't know how to use non-auto mode */
418 
419 	rc = s921_pll_tune(fe);
420 	if (rc < 0)
421 		return rc;
422 
423 	state->currentfreq = p->frequency;
424 
425 	return 0;
426 }
427 
428 static int s921_get_frontend(struct dvb_frontend *fe,
429 			     struct dtv_frontend_properties *p)
430 {
431 	struct s921_state *state = fe->demodulator_priv;
432 
433 	/* FIXME: Probably it is possible to get it from regs f1 and f2 */
434 	p->frequency = state->currentfreq;
435 	p->delivery_system = SYS_ISDBT;
436 
437 	return 0;
438 }
439 
440 static int s921_tune(struct dvb_frontend *fe,
441 			bool re_tune,
442 			unsigned int mode_flags,
443 			unsigned int *delay,
444 			enum fe_status *status)
445 {
446 	int rc = 0;
447 
448 	dprintk("\n");
449 
450 	if (re_tune)
451 		rc = s921_set_frontend(fe);
452 
453 	if (!(mode_flags & FE_TUNE_MODE_ONESHOT))
454 		s921_read_status(fe, status);
455 
456 	return rc;
457 }
458 
459 static enum dvbfe_algo s921_get_algo(struct dvb_frontend *fe)
460 {
461 	return DVBFE_ALGO_HW;
462 }
463 
464 static void s921_release(struct dvb_frontend *fe)
465 {
466 	struct s921_state *state = fe->demodulator_priv;
467 
468 	dprintk("\n");
469 	kfree(state);
470 }
471 
472 static const struct dvb_frontend_ops s921_ops;
473 
474 struct dvb_frontend *s921_attach(const struct s921_config *config,
475 				    struct i2c_adapter *i2c)
476 {
477 	/* allocate memory for the internal state */
478 	struct s921_state *state =
479 		kzalloc(sizeof(struct s921_state), GFP_KERNEL);
480 
481 	dprintk("\n");
482 	if (!state) {
483 		rc("Unable to kzalloc\n");
484 		return NULL;
485 	}
486 
487 	/* setup the state */
488 	state->config = config;
489 	state->i2c = i2c;
490 
491 	/* create dvb_frontend */
492 	memcpy(&state->frontend.ops, &s921_ops,
493 		sizeof(struct dvb_frontend_ops));
494 	state->frontend.demodulator_priv = state;
495 
496 	return &state->frontend;
497 }
498 EXPORT_SYMBOL_GPL(s921_attach);
499 
500 static const struct dvb_frontend_ops s921_ops = {
501 	.delsys = { SYS_ISDBT },
502 	/* Use dib8000 values per default */
503 	.info = {
504 		.name = "Sharp S921",
505 		.frequency_min_hz = 470 * MHz,
506 		/*
507 		 * Max should be 770MHz instead, according with Sharp docs,
508 		 * but Leadership doc says it works up to 806 MHz. This is
509 		 * required to get channel 69, used in Brazil
510 		 */
511 		.frequency_max_hz = 806 * MHz,
512 		.caps =  FE_CAN_INVERSION_AUTO |
513 			 FE_CAN_FEC_1_2  | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
514 			 FE_CAN_FEC_5_6  | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
515 			 FE_CAN_QPSK     | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
516 			 FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO |
517 			 FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER |
518 			 FE_CAN_HIERARCHY_AUTO,
519 	},
520 
521 	.release = s921_release,
522 
523 	.init = s921_initfe,
524 	.set_frontend = s921_set_frontend,
525 	.get_frontend = s921_get_frontend,
526 	.read_status = s921_read_status,
527 	.read_signal_strength = s921_read_signal_strength,
528 	.tune = s921_tune,
529 	.get_frontend_algo = s921_get_algo,
530 };
531 
532 MODULE_DESCRIPTION("DVB Frontend module for Sharp S921 hardware");
533 MODULE_AUTHOR("Mauro Carvalho Chehab");
534 MODULE_AUTHOR("Douglas Landgraf <dougsland@redhat.com>");
535 MODULE_LICENSE("GPL");
536