1 /* 2 Montage Technology DS3000 - DVBS/S2 Demodulator driver 3 Copyright (C) 2009-2012 Konstantin Dimitrov <kosio.dimitrov@gmail.com> 4 5 Copyright (C) 2009-2012 TurboSight.com 6 7 This program is free software; you can redistribute it and/or modify 8 it under the terms of the GNU General Public License as published by 9 the Free Software Foundation; either version 2 of the License, or 10 (at your option) any later version. 11 12 This program is distributed in the hope that it will be useful, 13 but WITHOUT ANY WARRANTY; without even the implied warranty of 14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 GNU General Public License for more details. 16 17 You should have received a copy of the GNU General Public License 18 along with this program; if not, write to the Free Software 19 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 20 */ 21 22 #include <linux/slab.h> 23 #include <linux/kernel.h> 24 #include <linux/module.h> 25 #include <linux/moduleparam.h> 26 #include <linux/init.h> 27 #include <linux/firmware.h> 28 29 #include <media/dvb_frontend.h> 30 #include "ts2020.h" 31 #include "ds3000.h" 32 33 static int debug; 34 35 #define dprintk(args...) \ 36 do { \ 37 if (debug) \ 38 printk(args); \ 39 } while (0) 40 41 /* as of March 2009 current DS3000 firmware version is 1.78 */ 42 /* DS3000 FW v1.78 MD5: a32d17910c4f370073f9346e71d34b80 */ 43 #define DS3000_DEFAULT_FIRMWARE "dvb-fe-ds3000.fw" 44 45 #define DS3000_SAMPLE_RATE 96000 /* in kHz */ 46 47 /* Register values to initialise the demod in DVB-S mode */ 48 static u8 ds3000_dvbs_init_tab[] = { 49 0x23, 0x05, 50 0x08, 0x03, 51 0x0c, 0x00, 52 0x21, 0x54, 53 0x25, 0x82, 54 0x27, 0x31, 55 0x30, 0x08, 56 0x31, 0x40, 57 0x32, 0x32, 58 0x33, 0x35, 59 0x35, 0xff, 60 0x3a, 0x00, 61 0x37, 0x10, 62 0x38, 0x10, 63 0x39, 0x02, 64 0x42, 0x60, 65 0x4a, 0x40, 66 0x4b, 0x04, 67 0x4d, 0x91, 68 0x5d, 0xc8, 69 0x50, 0x77, 70 0x51, 0x77, 71 0x52, 0x36, 72 0x53, 0x36, 73 0x56, 0x01, 74 0x63, 0x43, 75 0x64, 0x30, 76 0x65, 0x40, 77 0x68, 0x26, 78 0x69, 0x4c, 79 0x70, 0x20, 80 0x71, 0x70, 81 0x72, 0x04, 82 0x73, 0x00, 83 0x70, 0x40, 84 0x71, 0x70, 85 0x72, 0x04, 86 0x73, 0x00, 87 0x70, 0x60, 88 0x71, 0x70, 89 0x72, 0x04, 90 0x73, 0x00, 91 0x70, 0x80, 92 0x71, 0x70, 93 0x72, 0x04, 94 0x73, 0x00, 95 0x70, 0xa0, 96 0x71, 0x70, 97 0x72, 0x04, 98 0x73, 0x00, 99 0x70, 0x1f, 100 0x76, 0x00, 101 0x77, 0xd1, 102 0x78, 0x0c, 103 0x79, 0x80, 104 0x7f, 0x04, 105 0x7c, 0x00, 106 0x80, 0x86, 107 0x81, 0xa6, 108 0x85, 0x04, 109 0xcd, 0xf4, 110 0x90, 0x33, 111 0xa0, 0x44, 112 0xc0, 0x18, 113 0xc3, 0x10, 114 0xc4, 0x08, 115 0xc5, 0x80, 116 0xc6, 0x80, 117 0xc7, 0x0a, 118 0xc8, 0x1a, 119 0xc9, 0x80, 120 0xfe, 0x92, 121 0xe0, 0xf8, 122 0xe6, 0x8b, 123 0xd0, 0x40, 124 0xf8, 0x20, 125 0xfa, 0x0f, 126 0xfd, 0x20, 127 0xad, 0x20, 128 0xae, 0x07, 129 0xb8, 0x00, 130 }; 131 132 /* Register values to initialise the demod in DVB-S2 mode */ 133 static u8 ds3000_dvbs2_init_tab[] = { 134 0x23, 0x0f, 135 0x08, 0x07, 136 0x0c, 0x00, 137 0x21, 0x54, 138 0x25, 0x82, 139 0x27, 0x31, 140 0x30, 0x08, 141 0x31, 0x32, 142 0x32, 0x32, 143 0x33, 0x35, 144 0x35, 0xff, 145 0x3a, 0x00, 146 0x37, 0x10, 147 0x38, 0x10, 148 0x39, 0x02, 149 0x42, 0x60, 150 0x4a, 0x80, 151 0x4b, 0x04, 152 0x4d, 0x81, 153 0x5d, 0x88, 154 0x50, 0x36, 155 0x51, 0x36, 156 0x52, 0x36, 157 0x53, 0x36, 158 0x63, 0x60, 159 0x64, 0x10, 160 0x65, 0x10, 161 0x68, 0x04, 162 0x69, 0x29, 163 0x70, 0x20, 164 0x71, 0x70, 165 0x72, 0x04, 166 0x73, 0x00, 167 0x70, 0x40, 168 0x71, 0x70, 169 0x72, 0x04, 170 0x73, 0x00, 171 0x70, 0x60, 172 0x71, 0x70, 173 0x72, 0x04, 174 0x73, 0x00, 175 0x70, 0x80, 176 0x71, 0x70, 177 0x72, 0x04, 178 0x73, 0x00, 179 0x70, 0xa0, 180 0x71, 0x70, 181 0x72, 0x04, 182 0x73, 0x00, 183 0x70, 0x1f, 184 0xa0, 0x44, 185 0xc0, 0x08, 186 0xc1, 0x10, 187 0xc2, 0x08, 188 0xc3, 0x10, 189 0xc4, 0x08, 190 0xc5, 0xf0, 191 0xc6, 0xf0, 192 0xc7, 0x0a, 193 0xc8, 0x1a, 194 0xc9, 0x80, 195 0xca, 0x23, 196 0xcb, 0x24, 197 0xce, 0x74, 198 0x90, 0x03, 199 0x76, 0x80, 200 0x77, 0x42, 201 0x78, 0x0a, 202 0x79, 0x80, 203 0xad, 0x40, 204 0xae, 0x07, 205 0x7f, 0xd4, 206 0x7c, 0x00, 207 0x80, 0xa8, 208 0x81, 0xda, 209 0x7c, 0x01, 210 0x80, 0xda, 211 0x81, 0xec, 212 0x7c, 0x02, 213 0x80, 0xca, 214 0x81, 0xeb, 215 0x7c, 0x03, 216 0x80, 0xba, 217 0x81, 0xdb, 218 0x85, 0x08, 219 0x86, 0x00, 220 0x87, 0x02, 221 0x89, 0x80, 222 0x8b, 0x44, 223 0x8c, 0xaa, 224 0x8a, 0x10, 225 0xba, 0x00, 226 0xf5, 0x04, 227 0xfe, 0x44, 228 0xd2, 0x32, 229 0xb8, 0x00, 230 }; 231 232 struct ds3000_state { 233 struct i2c_adapter *i2c; 234 const struct ds3000_config *config; 235 struct dvb_frontend frontend; 236 /* previous uncorrected block counter for DVB-S2 */ 237 u16 prevUCBS2; 238 }; 239 240 static int ds3000_writereg(struct ds3000_state *state, int reg, int data) 241 { 242 u8 buf[] = { reg, data }; 243 struct i2c_msg msg = { .addr = state->config->demod_address, 244 .flags = 0, .buf = buf, .len = 2 }; 245 int err; 246 247 dprintk("%s: write reg 0x%02x, value 0x%02x\n", __func__, reg, data); 248 249 err = i2c_transfer(state->i2c, &msg, 1); 250 if (err != 1) { 251 printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x, value == 0x%02x)\n", 252 __func__, err, reg, data); 253 return -EREMOTEIO; 254 } 255 256 return 0; 257 } 258 259 static int ds3000_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) 260 { 261 struct ds3000_state *state = fe->demodulator_priv; 262 263 if (enable) 264 ds3000_writereg(state, 0x03, 0x12); 265 else 266 ds3000_writereg(state, 0x03, 0x02); 267 268 return 0; 269 } 270 271 /* I2C write for 8k firmware load */ 272 static int ds3000_writeFW(struct ds3000_state *state, int reg, 273 const u8 *data, u16 len) 274 { 275 int i, ret = 0; 276 struct i2c_msg msg; 277 u8 *buf; 278 279 buf = kmalloc(33, GFP_KERNEL); 280 if (!buf) 281 return -ENOMEM; 282 283 *(buf) = reg; 284 285 msg.addr = state->config->demod_address; 286 msg.flags = 0; 287 msg.buf = buf; 288 msg.len = 33; 289 290 for (i = 0; i < len; i += 32) { 291 memcpy(buf + 1, data + i, 32); 292 293 dprintk("%s: write reg 0x%02x, len = %d\n", __func__, reg, len); 294 295 ret = i2c_transfer(state->i2c, &msg, 1); 296 if (ret != 1) { 297 printk(KERN_ERR "%s: write error(err == %i, reg == 0x%02x\n", 298 __func__, ret, reg); 299 ret = -EREMOTEIO; 300 goto error; 301 } 302 } 303 ret = 0; 304 305 error: 306 kfree(buf); 307 308 return ret; 309 } 310 311 static int ds3000_readreg(struct ds3000_state *state, u8 reg) 312 { 313 int ret; 314 u8 b0[] = { reg }; 315 u8 b1[] = { 0 }; 316 struct i2c_msg msg[] = { 317 { 318 .addr = state->config->demod_address, 319 .flags = 0, 320 .buf = b0, 321 .len = 1 322 }, { 323 .addr = state->config->demod_address, 324 .flags = I2C_M_RD, 325 .buf = b1, 326 .len = 1 327 } 328 }; 329 330 ret = i2c_transfer(state->i2c, msg, 2); 331 332 if (ret != 2) { 333 printk(KERN_ERR "%s: reg=0x%x(error=%d)\n", __func__, reg, ret); 334 return ret; 335 } 336 337 dprintk("%s: read reg 0x%02x, value 0x%02x\n", __func__, reg, b1[0]); 338 339 return b1[0]; 340 } 341 342 static int ds3000_load_firmware(struct dvb_frontend *fe, 343 const struct firmware *fw); 344 345 static int ds3000_firmware_ondemand(struct dvb_frontend *fe) 346 { 347 struct ds3000_state *state = fe->demodulator_priv; 348 const struct firmware *fw; 349 int ret = 0; 350 351 dprintk("%s()\n", __func__); 352 353 ret = ds3000_readreg(state, 0xb2); 354 if (ret < 0) 355 return ret; 356 357 /* Load firmware */ 358 /* request the firmware, this will block until someone uploads it */ 359 printk(KERN_INFO "%s: Waiting for firmware upload (%s)...\n", __func__, 360 DS3000_DEFAULT_FIRMWARE); 361 ret = request_firmware(&fw, DS3000_DEFAULT_FIRMWARE, 362 state->i2c->dev.parent); 363 printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n", __func__); 364 if (ret) { 365 printk(KERN_ERR "%s: No firmware uploaded (timeout or file not found?)\n", 366 __func__); 367 return ret; 368 } 369 370 ret = ds3000_load_firmware(fe, fw); 371 if (ret) 372 printk("%s: Writing firmware to device failed\n", __func__); 373 374 release_firmware(fw); 375 376 dprintk("%s: Firmware upload %s\n", __func__, 377 ret == 0 ? "complete" : "failed"); 378 379 return ret; 380 } 381 382 static int ds3000_load_firmware(struct dvb_frontend *fe, 383 const struct firmware *fw) 384 { 385 struct ds3000_state *state = fe->demodulator_priv; 386 int ret = 0; 387 388 dprintk("%s\n", __func__); 389 dprintk("Firmware is %zu bytes (%02x %02x .. %02x %02x)\n", 390 fw->size, 391 fw->data[0], 392 fw->data[1], 393 fw->data[fw->size - 2], 394 fw->data[fw->size - 1]); 395 396 /* Begin the firmware load process */ 397 ds3000_writereg(state, 0xb2, 0x01); 398 /* write the entire firmware */ 399 ret = ds3000_writeFW(state, 0xb0, fw->data, fw->size); 400 ds3000_writereg(state, 0xb2, 0x00); 401 402 return ret; 403 } 404 405 static int ds3000_set_voltage(struct dvb_frontend *fe, 406 enum fe_sec_voltage voltage) 407 { 408 struct ds3000_state *state = fe->demodulator_priv; 409 u8 data; 410 411 dprintk("%s(%d)\n", __func__, voltage); 412 413 data = ds3000_readreg(state, 0xa2); 414 data |= 0x03; /* bit0 V/H, bit1 off/on */ 415 416 switch (voltage) { 417 case SEC_VOLTAGE_18: 418 data &= ~0x03; 419 break; 420 case SEC_VOLTAGE_13: 421 data &= ~0x03; 422 data |= 0x01; 423 break; 424 case SEC_VOLTAGE_OFF: 425 break; 426 } 427 428 ds3000_writereg(state, 0xa2, data); 429 430 return 0; 431 } 432 433 static int ds3000_read_status(struct dvb_frontend *fe, enum fe_status *status) 434 { 435 struct ds3000_state *state = fe->demodulator_priv; 436 struct dtv_frontend_properties *c = &fe->dtv_property_cache; 437 int lock; 438 439 *status = 0; 440 441 switch (c->delivery_system) { 442 case SYS_DVBS: 443 lock = ds3000_readreg(state, 0xd1); 444 if ((lock & 0x07) == 0x07) 445 *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | 446 FE_HAS_VITERBI | FE_HAS_SYNC | 447 FE_HAS_LOCK; 448 449 break; 450 case SYS_DVBS2: 451 lock = ds3000_readreg(state, 0x0d); 452 if ((lock & 0x8f) == 0x8f) 453 *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | 454 FE_HAS_VITERBI | FE_HAS_SYNC | 455 FE_HAS_LOCK; 456 457 break; 458 default: 459 return -EINVAL; 460 } 461 462 if (state->config->set_lock_led) 463 state->config->set_lock_led(fe, *status == 0 ? 0 : 1); 464 465 dprintk("%s: status = 0x%02x\n", __func__, lock); 466 467 return 0; 468 } 469 470 /* read DS3000 BER value */ 471 static int ds3000_read_ber(struct dvb_frontend *fe, u32* ber) 472 { 473 struct ds3000_state *state = fe->demodulator_priv; 474 struct dtv_frontend_properties *c = &fe->dtv_property_cache; 475 u8 data; 476 u32 ber_reading, lpdc_frames; 477 478 dprintk("%s()\n", __func__); 479 480 switch (c->delivery_system) { 481 case SYS_DVBS: 482 /* set the number of bytes checked during 483 BER estimation */ 484 ds3000_writereg(state, 0xf9, 0x04); 485 /* read BER estimation status */ 486 data = ds3000_readreg(state, 0xf8); 487 /* check if BER estimation is ready */ 488 if ((data & 0x10) == 0) { 489 /* this is the number of error bits, 490 to calculate the bit error rate 491 divide to 8388608 */ 492 *ber = (ds3000_readreg(state, 0xf7) << 8) | 493 ds3000_readreg(state, 0xf6); 494 /* start counting error bits */ 495 /* need to be set twice 496 otherwise it fails sometimes */ 497 data |= 0x10; 498 ds3000_writereg(state, 0xf8, data); 499 ds3000_writereg(state, 0xf8, data); 500 } else 501 /* used to indicate that BER estimation 502 is not ready, i.e. BER is unknown */ 503 *ber = 0xffffffff; 504 break; 505 case SYS_DVBS2: 506 /* read the number of LPDC decoded frames */ 507 lpdc_frames = (ds3000_readreg(state, 0xd7) << 16) | 508 (ds3000_readreg(state, 0xd6) << 8) | 509 ds3000_readreg(state, 0xd5); 510 /* read the number of packets with bad CRC */ 511 ber_reading = (ds3000_readreg(state, 0xf8) << 8) | 512 ds3000_readreg(state, 0xf7); 513 if (lpdc_frames > 750) { 514 /* clear LPDC frame counters */ 515 ds3000_writereg(state, 0xd1, 0x01); 516 /* clear bad packets counter */ 517 ds3000_writereg(state, 0xf9, 0x01); 518 /* enable bad packets counter */ 519 ds3000_writereg(state, 0xf9, 0x00); 520 /* enable LPDC frame counters */ 521 ds3000_writereg(state, 0xd1, 0x00); 522 *ber = ber_reading; 523 } else 524 /* used to indicate that BER estimation is not ready, 525 i.e. BER is unknown */ 526 *ber = 0xffffffff; 527 break; 528 default: 529 return -EINVAL; 530 } 531 532 return 0; 533 } 534 535 static int ds3000_read_signal_strength(struct dvb_frontend *fe, 536 u16 *signal_strength) 537 { 538 if (fe->ops.tuner_ops.get_rf_strength) 539 fe->ops.tuner_ops.get_rf_strength(fe, signal_strength); 540 541 return 0; 542 } 543 544 /* calculate DS3000 snr value in dB */ 545 static int ds3000_read_snr(struct dvb_frontend *fe, u16 *snr) 546 { 547 struct ds3000_state *state = fe->demodulator_priv; 548 struct dtv_frontend_properties *c = &fe->dtv_property_cache; 549 u8 snr_reading, snr_value; 550 u32 dvbs2_signal_reading, dvbs2_noise_reading, tmp; 551 static const u16 dvbs_snr_tab[] = { /* 20 x Table (rounded up) */ 552 0x0000, 0x1b13, 0x2aea, 0x3627, 0x3ede, 0x45fe, 0x4c03, 553 0x513a, 0x55d4, 0x59f2, 0x5dab, 0x6111, 0x6431, 0x6717, 554 0x69c9, 0x6c4e, 0x6eac, 0x70e8, 0x7304, 0x7505 555 }; 556 static const u16 dvbs2_snr_tab[] = { /* 80 x Table (rounded up) */ 557 0x0000, 0x0bc2, 0x12a3, 0x1785, 0x1b4e, 0x1e65, 0x2103, 558 0x2347, 0x2546, 0x2710, 0x28ae, 0x2a28, 0x2b83, 0x2cc5, 559 0x2df1, 0x2f09, 0x3010, 0x3109, 0x31f4, 0x32d2, 0x33a6, 560 0x3470, 0x3531, 0x35ea, 0x369b, 0x3746, 0x37ea, 0x3888, 561 0x3920, 0x39b3, 0x3a42, 0x3acc, 0x3b51, 0x3bd3, 0x3c51, 562 0x3ccb, 0x3d42, 0x3db6, 0x3e27, 0x3e95, 0x3f00, 0x3f68, 563 0x3fcf, 0x4033, 0x4094, 0x40f4, 0x4151, 0x41ac, 0x4206, 564 0x425e, 0x42b4, 0x4308, 0x435b, 0x43ac, 0x43fc, 0x444a, 565 0x4497, 0x44e2, 0x452d, 0x4576, 0x45bd, 0x4604, 0x4649, 566 0x468e, 0x46d1, 0x4713, 0x4755, 0x4795, 0x47d4, 0x4813, 567 0x4851, 0x488d, 0x48c9, 0x4904, 0x493f, 0x4978, 0x49b1, 568 0x49e9, 0x4a20, 0x4a57 569 }; 570 571 dprintk("%s()\n", __func__); 572 573 switch (c->delivery_system) { 574 case SYS_DVBS: 575 snr_reading = ds3000_readreg(state, 0xff); 576 snr_reading /= 8; 577 if (snr_reading == 0) 578 *snr = 0x0000; 579 else { 580 if (snr_reading > 20) 581 snr_reading = 20; 582 snr_value = dvbs_snr_tab[snr_reading - 1] * 10 / 23026; 583 /* cook the value to be suitable for szap-s2 584 human readable output */ 585 *snr = snr_value * 8 * 655; 586 } 587 dprintk("%s: raw / cooked = 0x%02x / 0x%04x\n", __func__, 588 snr_reading, *snr); 589 break; 590 case SYS_DVBS2: 591 dvbs2_noise_reading = (ds3000_readreg(state, 0x8c) & 0x3f) + 592 (ds3000_readreg(state, 0x8d) << 4); 593 dvbs2_signal_reading = ds3000_readreg(state, 0x8e); 594 tmp = dvbs2_signal_reading * dvbs2_signal_reading >> 1; 595 if (tmp == 0) { 596 *snr = 0x0000; 597 return 0; 598 } 599 if (dvbs2_noise_reading == 0) { 600 snr_value = 0x0013; 601 /* cook the value to be suitable for szap-s2 602 human readable output */ 603 *snr = 0xffff; 604 return 0; 605 } 606 if (tmp > dvbs2_noise_reading) { 607 snr_reading = tmp / dvbs2_noise_reading; 608 if (snr_reading > 80) 609 snr_reading = 80; 610 snr_value = dvbs2_snr_tab[snr_reading - 1] / 1000; 611 /* cook the value to be suitable for szap-s2 612 human readable output */ 613 *snr = snr_value * 5 * 655; 614 } else { 615 snr_reading = dvbs2_noise_reading / tmp; 616 if (snr_reading > 80) 617 snr_reading = 80; 618 *snr = -(dvbs2_snr_tab[snr_reading - 1] / 1000); 619 } 620 dprintk("%s: raw / cooked = 0x%02x / 0x%04x\n", __func__, 621 snr_reading, *snr); 622 break; 623 default: 624 return -EINVAL; 625 } 626 627 return 0; 628 } 629 630 /* read DS3000 uncorrected blocks */ 631 static int ds3000_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) 632 { 633 struct ds3000_state *state = fe->demodulator_priv; 634 struct dtv_frontend_properties *c = &fe->dtv_property_cache; 635 u8 data; 636 u16 _ucblocks; 637 638 dprintk("%s()\n", __func__); 639 640 switch (c->delivery_system) { 641 case SYS_DVBS: 642 *ucblocks = (ds3000_readreg(state, 0xf5) << 8) | 643 ds3000_readreg(state, 0xf4); 644 data = ds3000_readreg(state, 0xf8); 645 /* clear packet counters */ 646 data &= ~0x20; 647 ds3000_writereg(state, 0xf8, data); 648 /* enable packet counters */ 649 data |= 0x20; 650 ds3000_writereg(state, 0xf8, data); 651 break; 652 case SYS_DVBS2: 653 _ucblocks = (ds3000_readreg(state, 0xe2) << 8) | 654 ds3000_readreg(state, 0xe1); 655 if (_ucblocks > state->prevUCBS2) 656 *ucblocks = _ucblocks - state->prevUCBS2; 657 else 658 *ucblocks = state->prevUCBS2 - _ucblocks; 659 state->prevUCBS2 = _ucblocks; 660 break; 661 default: 662 return -EINVAL; 663 } 664 665 return 0; 666 } 667 668 static int ds3000_set_tone(struct dvb_frontend *fe, enum fe_sec_tone_mode tone) 669 { 670 struct ds3000_state *state = fe->demodulator_priv; 671 u8 data; 672 673 dprintk("%s(%d)\n", __func__, tone); 674 if ((tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF)) { 675 printk(KERN_ERR "%s: Invalid, tone=%d\n", __func__, tone); 676 return -EINVAL; 677 } 678 679 data = ds3000_readreg(state, 0xa2); 680 data &= ~0xc0; 681 ds3000_writereg(state, 0xa2, data); 682 683 switch (tone) { 684 case SEC_TONE_ON: 685 dprintk("%s: setting tone on\n", __func__); 686 data = ds3000_readreg(state, 0xa1); 687 data &= ~0x43; 688 data |= 0x04; 689 ds3000_writereg(state, 0xa1, data); 690 break; 691 case SEC_TONE_OFF: 692 dprintk("%s: setting tone off\n", __func__); 693 data = ds3000_readreg(state, 0xa2); 694 data |= 0x80; 695 ds3000_writereg(state, 0xa2, data); 696 break; 697 } 698 699 return 0; 700 } 701 702 static int ds3000_send_diseqc_msg(struct dvb_frontend *fe, 703 struct dvb_diseqc_master_cmd *d) 704 { 705 struct ds3000_state *state = fe->demodulator_priv; 706 int i; 707 u8 data; 708 709 /* Dump DiSEqC message */ 710 dprintk("%s(", __func__); 711 for (i = 0 ; i < d->msg_len;) { 712 dprintk("0x%02x", d->msg[i]); 713 if (++i < d->msg_len) 714 dprintk(", "); 715 } 716 717 /* enable DiSEqC message send pin */ 718 data = ds3000_readreg(state, 0xa2); 719 data &= ~0xc0; 720 ds3000_writereg(state, 0xa2, data); 721 722 /* DiSEqC message */ 723 for (i = 0; i < d->msg_len; i++) 724 ds3000_writereg(state, 0xa3 + i, d->msg[i]); 725 726 data = ds3000_readreg(state, 0xa1); 727 /* clear DiSEqC message length and status, 728 enable DiSEqC message send */ 729 data &= ~0xf8; 730 /* set DiSEqC mode, modulation active during 33 pulses, 731 set DiSEqC message length */ 732 data |= ((d->msg_len - 1) << 3) | 0x07; 733 ds3000_writereg(state, 0xa1, data); 734 735 /* wait up to 150ms for DiSEqC transmission to complete */ 736 for (i = 0; i < 15; i++) { 737 data = ds3000_readreg(state, 0xa1); 738 if ((data & 0x40) == 0) 739 break; 740 msleep(10); 741 } 742 743 /* DiSEqC timeout after 150ms */ 744 if (i == 15) { 745 data = ds3000_readreg(state, 0xa1); 746 data &= ~0x80; 747 data |= 0x40; 748 ds3000_writereg(state, 0xa1, data); 749 750 data = ds3000_readreg(state, 0xa2); 751 data &= ~0xc0; 752 data |= 0x80; 753 ds3000_writereg(state, 0xa2, data); 754 755 return -ETIMEDOUT; 756 } 757 758 data = ds3000_readreg(state, 0xa2); 759 data &= ~0xc0; 760 data |= 0x80; 761 ds3000_writereg(state, 0xa2, data); 762 763 return 0; 764 } 765 766 /* Send DiSEqC burst */ 767 static int ds3000_diseqc_send_burst(struct dvb_frontend *fe, 768 enum fe_sec_mini_cmd burst) 769 { 770 struct ds3000_state *state = fe->demodulator_priv; 771 int i; 772 u8 data; 773 774 dprintk("%s()\n", __func__); 775 776 data = ds3000_readreg(state, 0xa2); 777 data &= ~0xc0; 778 ds3000_writereg(state, 0xa2, data); 779 780 /* DiSEqC burst */ 781 if (burst == SEC_MINI_A) 782 /* Unmodulated tone burst */ 783 ds3000_writereg(state, 0xa1, 0x02); 784 else if (burst == SEC_MINI_B) 785 /* Modulated tone burst */ 786 ds3000_writereg(state, 0xa1, 0x01); 787 else 788 return -EINVAL; 789 790 msleep(13); 791 for (i = 0; i < 5; i++) { 792 data = ds3000_readreg(state, 0xa1); 793 if ((data & 0x40) == 0) 794 break; 795 msleep(1); 796 } 797 798 if (i == 5) { 799 data = ds3000_readreg(state, 0xa1); 800 data &= ~0x80; 801 data |= 0x40; 802 ds3000_writereg(state, 0xa1, data); 803 804 data = ds3000_readreg(state, 0xa2); 805 data &= ~0xc0; 806 data |= 0x80; 807 ds3000_writereg(state, 0xa2, data); 808 809 return -ETIMEDOUT; 810 } 811 812 data = ds3000_readreg(state, 0xa2); 813 data &= ~0xc0; 814 data |= 0x80; 815 ds3000_writereg(state, 0xa2, data); 816 817 return 0; 818 } 819 820 static void ds3000_release(struct dvb_frontend *fe) 821 { 822 struct ds3000_state *state = fe->demodulator_priv; 823 824 if (state->config->set_lock_led) 825 state->config->set_lock_led(fe, 0); 826 827 dprintk("%s\n", __func__); 828 kfree(state); 829 } 830 831 static const struct dvb_frontend_ops ds3000_ops; 832 833 struct dvb_frontend *ds3000_attach(const struct ds3000_config *config, 834 struct i2c_adapter *i2c) 835 { 836 struct ds3000_state *state; 837 int ret; 838 839 dprintk("%s\n", __func__); 840 841 /* allocate memory for the internal state */ 842 state = kzalloc(sizeof(*state), GFP_KERNEL); 843 if (!state) 844 return NULL; 845 846 state->config = config; 847 state->i2c = i2c; 848 state->prevUCBS2 = 0; 849 850 /* check if the demod is present */ 851 ret = ds3000_readreg(state, 0x00) & 0xfe; 852 if (ret != 0xe0) { 853 kfree(state); 854 printk(KERN_ERR "Invalid probe, probably not a DS3000\n"); 855 return NULL; 856 } 857 858 printk(KERN_INFO "DS3000 chip version: %d.%d attached.\n", 859 ds3000_readreg(state, 0x02), 860 ds3000_readreg(state, 0x01)); 861 862 memcpy(&state->frontend.ops, &ds3000_ops, 863 sizeof(struct dvb_frontend_ops)); 864 state->frontend.demodulator_priv = state; 865 866 /* 867 * Some devices like T480 starts with voltage on. Be sure 868 * to turn voltage off during init, as this can otherwise 869 * interfere with Unicable SCR systems. 870 */ 871 ds3000_set_voltage(&state->frontend, SEC_VOLTAGE_OFF); 872 return &state->frontend; 873 } 874 EXPORT_SYMBOL(ds3000_attach); 875 876 static int ds3000_set_carrier_offset(struct dvb_frontend *fe, 877 s32 carrier_offset_khz) 878 { 879 struct ds3000_state *state = fe->demodulator_priv; 880 s32 tmp; 881 882 tmp = carrier_offset_khz; 883 tmp *= 65536; 884 tmp = (2 * tmp + DS3000_SAMPLE_RATE) / (2 * DS3000_SAMPLE_RATE); 885 886 if (tmp < 0) 887 tmp += 65536; 888 889 ds3000_writereg(state, 0x5f, tmp >> 8); 890 ds3000_writereg(state, 0x5e, tmp & 0xff); 891 892 return 0; 893 } 894 895 static int ds3000_set_frontend(struct dvb_frontend *fe) 896 { 897 struct ds3000_state *state = fe->demodulator_priv; 898 struct dtv_frontend_properties *c = &fe->dtv_property_cache; 899 900 int i; 901 enum fe_status status; 902 s32 offset_khz; 903 u32 frequency; 904 u16 value; 905 906 dprintk("%s() ", __func__); 907 908 if (state->config->set_ts_params) 909 state->config->set_ts_params(fe, 0); 910 /* Tune */ 911 if (fe->ops.tuner_ops.set_params) 912 fe->ops.tuner_ops.set_params(fe); 913 914 /* ds3000 global reset */ 915 ds3000_writereg(state, 0x07, 0x80); 916 ds3000_writereg(state, 0x07, 0x00); 917 /* ds3000 build-in uC reset */ 918 ds3000_writereg(state, 0xb2, 0x01); 919 /* ds3000 software reset */ 920 ds3000_writereg(state, 0x00, 0x01); 921 922 switch (c->delivery_system) { 923 case SYS_DVBS: 924 /* initialise the demod in DVB-S mode */ 925 for (i = 0; i < sizeof(ds3000_dvbs_init_tab); i += 2) 926 ds3000_writereg(state, 927 ds3000_dvbs_init_tab[i], 928 ds3000_dvbs_init_tab[i + 1]); 929 value = ds3000_readreg(state, 0xfe); 930 value &= 0xc0; 931 value |= 0x1b; 932 ds3000_writereg(state, 0xfe, value); 933 break; 934 case SYS_DVBS2: 935 /* initialise the demod in DVB-S2 mode */ 936 for (i = 0; i < sizeof(ds3000_dvbs2_init_tab); i += 2) 937 ds3000_writereg(state, 938 ds3000_dvbs2_init_tab[i], 939 ds3000_dvbs2_init_tab[i + 1]); 940 if (c->symbol_rate >= 30000000) 941 ds3000_writereg(state, 0xfe, 0x54); 942 else 943 ds3000_writereg(state, 0xfe, 0x98); 944 break; 945 default: 946 return -EINVAL; 947 } 948 949 /* enable 27MHz clock output */ 950 ds3000_writereg(state, 0x29, 0x80); 951 /* enable ac coupling */ 952 ds3000_writereg(state, 0x25, 0x8a); 953 954 if ((c->symbol_rate < ds3000_ops.info.symbol_rate_min) || 955 (c->symbol_rate > ds3000_ops.info.symbol_rate_max)) { 956 dprintk("%s() symbol_rate %u out of range (%u ... %u)\n", 957 __func__, c->symbol_rate, 958 ds3000_ops.info.symbol_rate_min, 959 ds3000_ops.info.symbol_rate_max); 960 return -EINVAL; 961 } 962 963 /* enhance symbol rate performance */ 964 if ((c->symbol_rate / 1000) <= 5000) { 965 value = 29777 / (c->symbol_rate / 1000) + 1; 966 if (value % 2 != 0) 967 value++; 968 ds3000_writereg(state, 0xc3, 0x0d); 969 ds3000_writereg(state, 0xc8, value); 970 ds3000_writereg(state, 0xc4, 0x10); 971 ds3000_writereg(state, 0xc7, 0x0e); 972 } else if ((c->symbol_rate / 1000) <= 10000) { 973 value = 92166 / (c->symbol_rate / 1000) + 1; 974 if (value % 2 != 0) 975 value++; 976 ds3000_writereg(state, 0xc3, 0x07); 977 ds3000_writereg(state, 0xc8, value); 978 ds3000_writereg(state, 0xc4, 0x09); 979 ds3000_writereg(state, 0xc7, 0x12); 980 } else if ((c->symbol_rate / 1000) <= 20000) { 981 value = 64516 / (c->symbol_rate / 1000) + 1; 982 ds3000_writereg(state, 0xc3, value); 983 ds3000_writereg(state, 0xc8, 0x0e); 984 ds3000_writereg(state, 0xc4, 0x07); 985 ds3000_writereg(state, 0xc7, 0x18); 986 } else { 987 value = 129032 / (c->symbol_rate / 1000) + 1; 988 ds3000_writereg(state, 0xc3, value); 989 ds3000_writereg(state, 0xc8, 0x0a); 990 ds3000_writereg(state, 0xc4, 0x05); 991 ds3000_writereg(state, 0xc7, 0x24); 992 } 993 994 /* normalized symbol rate rounded to the closest integer */ 995 value = (((c->symbol_rate / 1000) << 16) + 996 (DS3000_SAMPLE_RATE / 2)) / DS3000_SAMPLE_RATE; 997 ds3000_writereg(state, 0x61, value & 0x00ff); 998 ds3000_writereg(state, 0x62, (value & 0xff00) >> 8); 999 1000 /* co-channel interference cancellation disabled */ 1001 ds3000_writereg(state, 0x56, 0x00); 1002 1003 /* equalizer disabled */ 1004 ds3000_writereg(state, 0x76, 0x00); 1005 1006 /*ds3000_writereg(state, 0x08, 0x03); 1007 ds3000_writereg(state, 0xfd, 0x22); 1008 ds3000_writereg(state, 0x08, 0x07); 1009 ds3000_writereg(state, 0xfd, 0x42); 1010 ds3000_writereg(state, 0x08, 0x07);*/ 1011 1012 if (state->config->ci_mode) { 1013 switch (c->delivery_system) { 1014 case SYS_DVBS: 1015 default: 1016 ds3000_writereg(state, 0xfd, 0x80); 1017 break; 1018 case SYS_DVBS2: 1019 ds3000_writereg(state, 0xfd, 0x01); 1020 break; 1021 } 1022 } 1023 1024 /* ds3000 out of software reset */ 1025 ds3000_writereg(state, 0x00, 0x00); 1026 /* start ds3000 build-in uC */ 1027 ds3000_writereg(state, 0xb2, 0x00); 1028 1029 if (fe->ops.tuner_ops.get_frequency) { 1030 fe->ops.tuner_ops.get_frequency(fe, &frequency); 1031 offset_khz = frequency - c->frequency; 1032 ds3000_set_carrier_offset(fe, offset_khz); 1033 } 1034 1035 for (i = 0; i < 30 ; i++) { 1036 ds3000_read_status(fe, &status); 1037 if (status & FE_HAS_LOCK) 1038 break; 1039 1040 msleep(10); 1041 } 1042 1043 return 0; 1044 } 1045 1046 static int ds3000_tune(struct dvb_frontend *fe, 1047 bool re_tune, 1048 unsigned int mode_flags, 1049 unsigned int *delay, 1050 enum fe_status *status) 1051 { 1052 if (re_tune) { 1053 int ret = ds3000_set_frontend(fe); 1054 if (ret) 1055 return ret; 1056 } 1057 1058 *delay = HZ / 5; 1059 1060 return ds3000_read_status(fe, status); 1061 } 1062 1063 static enum dvbfe_algo ds3000_get_algo(struct dvb_frontend *fe) 1064 { 1065 struct ds3000_state *state = fe->demodulator_priv; 1066 1067 if (state->config->set_lock_led) 1068 state->config->set_lock_led(fe, 0); 1069 1070 dprintk("%s()\n", __func__); 1071 return DVBFE_ALGO_HW; 1072 } 1073 1074 /* 1075 * Initialise or wake up device 1076 * 1077 * Power config will reset and load initial firmware if required 1078 */ 1079 static int ds3000_initfe(struct dvb_frontend *fe) 1080 { 1081 struct ds3000_state *state = fe->demodulator_priv; 1082 int ret; 1083 1084 dprintk("%s()\n", __func__); 1085 /* hard reset */ 1086 ds3000_writereg(state, 0x08, 0x01 | ds3000_readreg(state, 0x08)); 1087 msleep(1); 1088 1089 /* Load the firmware if required */ 1090 ret = ds3000_firmware_ondemand(fe); 1091 if (ret != 0) { 1092 printk(KERN_ERR "%s: Unable initialize firmware\n", __func__); 1093 return ret; 1094 } 1095 1096 return 0; 1097 } 1098 1099 static const struct dvb_frontend_ops ds3000_ops = { 1100 .delsys = { SYS_DVBS, SYS_DVBS2 }, 1101 .info = { 1102 .name = "Montage Technology DS3000", 1103 .frequency_min_hz = 950 * MHz, 1104 .frequency_max_hz = 2150 * MHz, 1105 .frequency_stepsize_hz = 1011 * kHz, 1106 .frequency_tolerance_hz = 5 * MHz, 1107 .symbol_rate_min = 1000000, 1108 .symbol_rate_max = 45000000, 1109 .caps = FE_CAN_INVERSION_AUTO | 1110 FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | 1111 FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | 1112 FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | 1113 FE_CAN_2G_MODULATION | 1114 FE_CAN_QPSK | FE_CAN_RECOVER 1115 }, 1116 1117 .release = ds3000_release, 1118 1119 .init = ds3000_initfe, 1120 .i2c_gate_ctrl = ds3000_i2c_gate_ctrl, 1121 .read_status = ds3000_read_status, 1122 .read_ber = ds3000_read_ber, 1123 .read_signal_strength = ds3000_read_signal_strength, 1124 .read_snr = ds3000_read_snr, 1125 .read_ucblocks = ds3000_read_ucblocks, 1126 .set_voltage = ds3000_set_voltage, 1127 .set_tone = ds3000_set_tone, 1128 .diseqc_send_master_cmd = ds3000_send_diseqc_msg, 1129 .diseqc_send_burst = ds3000_diseqc_send_burst, 1130 .get_frontend_algo = ds3000_get_algo, 1131 1132 .set_frontend = ds3000_set_frontend, 1133 .tune = ds3000_tune, 1134 }; 1135 1136 module_param(debug, int, 0644); 1137 MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); 1138 1139 MODULE_DESCRIPTION("DVB Frontend module for Montage Technology DS3000 hardware"); 1140 MODULE_AUTHOR("Konstantin Dimitrov <kosio.dimitrov@gmail.com>"); 1141 MODULE_LICENSE("GPL"); 1142 MODULE_FIRMWARE(DS3000_DEFAULT_FIRMWARE); 1143