xref: /linux/drivers/media/dvb-frontends/cx24123.c (revision bd628c1bed7902ec1f24ba0fe70758949146abbe)
1 /*
2  *   Conexant cx24123/cx24109 - DVB QPSK Satellite demod/tuner driver
3  *
4  *   Copyright (C) 2005 Steven Toth <stoth@linuxtv.org>
5  *
6  *   Support for KWorld DVB-S 100 by Vadim Catana <skystar@moldova.cc>
7  *
8  *   Support for CX24123/CX24113-NIM by Patrick Boettcher <pb@linuxtv.org>
9  *
10  *   This program is free software; you can redistribute it and/or
11  *   modify it under the terms of the GNU General Public License as
12  *   published by the Free Software Foundation; either version 2 of
13  *   the License, or (at your option) any later version.
14  *
15  *   This program is distributed in the hope that it will be useful,
16  *   but WITHOUT ANY WARRANTY; without even the implied warranty of
17  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
18  *   General Public License for more details.
19  */
20 
21 #include <linux/slab.h>
22 #include <linux/kernel.h>
23 #include <linux/module.h>
24 #include <linux/init.h>
25 #include <asm/div64.h>
26 
27 #include <media/dvb_frontend.h>
28 #include "cx24123.h"
29 
30 #define XTAL 10111000
31 
32 static int force_band;
33 module_param(force_band, int, 0644);
34 MODULE_PARM_DESC(force_band, "Force a specific band select "\
35 	"(1-9, default:off).");
36 
37 static int debug;
38 module_param(debug, int, 0644);
39 MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
40 
41 #define info(args...) do { printk(KERN_INFO "CX24123: " args); } while (0)
42 #define err(args...)  do { printk(KERN_ERR  "CX24123: " args); } while (0)
43 
44 #define dprintk(args...) \
45 	do { \
46 		if (debug) { \
47 			printk(KERN_DEBUG "CX24123: %s: ", __func__); \
48 			printk(args); \
49 		} \
50 	} while (0)
51 
52 struct cx24123_state {
53 	struct i2c_adapter *i2c;
54 	const struct cx24123_config *config;
55 
56 	struct dvb_frontend frontend;
57 
58 	/* Some PLL specifics for tuning */
59 	u32 VCAarg;
60 	u32 VGAarg;
61 	u32 bandselectarg;
62 	u32 pllarg;
63 	u32 FILTune;
64 
65 	struct i2c_adapter tuner_i2c_adapter;
66 
67 	u8 demod_rev;
68 
69 	/* The Demod/Tuner can't easily provide these, we cache them */
70 	u32 currentfreq;
71 	u32 currentsymbolrate;
72 };
73 
74 /* Various tuner defaults need to be established for a given symbol rate Sps */
75 static struct cx24123_AGC_val {
76 	u32 symbolrate_low;
77 	u32 symbolrate_high;
78 	u32 VCAprogdata;
79 	u32 VGAprogdata;
80 	u32 FILTune;
81 } cx24123_AGC_vals[] =
82 {
83 	{
84 		.symbolrate_low		= 1000000,
85 		.symbolrate_high	= 4999999,
86 		/* the specs recommend other values for VGA offsets,
87 		   but tests show they are wrong */
88 		.VGAprogdata		= (1 << 19) | (0x180 << 9) | 0x1e0,
89 		.VCAprogdata		= (2 << 19) | (0x07 << 9) | 0x07,
90 		.FILTune		= 0x27f /* 0.41 V */
91 	},
92 	{
93 		.symbolrate_low		=  5000000,
94 		.symbolrate_high	= 14999999,
95 		.VGAprogdata		= (1 << 19) | (0x180 << 9) | 0x1e0,
96 		.VCAprogdata		= (2 << 19) | (0x07 << 9) | 0x1f,
97 		.FILTune		= 0x317 /* 0.90 V */
98 	},
99 	{
100 		.symbolrate_low		= 15000000,
101 		.symbolrate_high	= 45000000,
102 		.VGAprogdata		= (1 << 19) | (0x100 << 9) | 0x180,
103 		.VCAprogdata		= (2 << 19) | (0x07 << 9) | 0x3f,
104 		.FILTune		= 0x145 /* 2.70 V */
105 	},
106 };
107 
108 /*
109  * Various tuner defaults need to be established for a given frequency kHz.
110  * fixme: The bounds on the bands do not match the doc in real life.
111  * fixme: Some of them have been moved, other might need adjustment.
112  */
113 static struct cx24123_bandselect_val {
114 	u32 freq_low;
115 	u32 freq_high;
116 	u32 VCOdivider;
117 	u32 progdata;
118 } cx24123_bandselect_vals[] =
119 {
120 	/* band 1 */
121 	{
122 		.freq_low	= 950000,
123 		.freq_high	= 1074999,
124 		.VCOdivider	= 4,
125 		.progdata	= (0 << 19) | (0 << 9) | 0x40,
126 	},
127 
128 	/* band 2 */
129 	{
130 		.freq_low	= 1075000,
131 		.freq_high	= 1177999,
132 		.VCOdivider	= 4,
133 		.progdata	= (0 << 19) | (0 << 9) | 0x80,
134 	},
135 
136 	/* band 3 */
137 	{
138 		.freq_low	= 1178000,
139 		.freq_high	= 1295999,
140 		.VCOdivider	= 2,
141 		.progdata	= (0 << 19) | (1 << 9) | 0x01,
142 	},
143 
144 	/* band 4 */
145 	{
146 		.freq_low	= 1296000,
147 		.freq_high	= 1431999,
148 		.VCOdivider	= 2,
149 		.progdata	= (0 << 19) | (1 << 9) | 0x02,
150 	},
151 
152 	/* band 5 */
153 	{
154 		.freq_low	= 1432000,
155 		.freq_high	= 1575999,
156 		.VCOdivider	= 2,
157 		.progdata	= (0 << 19) | (1 << 9) | 0x04,
158 	},
159 
160 	/* band 6 */
161 	{
162 		.freq_low	= 1576000,
163 		.freq_high	= 1717999,
164 		.VCOdivider	= 2,
165 		.progdata	= (0 << 19) | (1 << 9) | 0x08,
166 	},
167 
168 	/* band 7 */
169 	{
170 		.freq_low	= 1718000,
171 		.freq_high	= 1855999,
172 		.VCOdivider	= 2,
173 		.progdata	= (0 << 19) | (1 << 9) | 0x10,
174 	},
175 
176 	/* band 8 */
177 	{
178 		.freq_low	= 1856000,
179 		.freq_high	= 2035999,
180 		.VCOdivider	= 2,
181 		.progdata	= (0 << 19) | (1 << 9) | 0x20,
182 	},
183 
184 	/* band 9 */
185 	{
186 		.freq_low	= 2036000,
187 		.freq_high	= 2150000,
188 		.VCOdivider	= 2,
189 		.progdata	= (0 << 19) | (1 << 9) | 0x40,
190 	},
191 };
192 
193 static struct {
194 	u8 reg;
195 	u8 data;
196 } cx24123_regdata[] =
197 {
198 	{0x00, 0x03}, /* Reset system */
199 	{0x00, 0x00}, /* Clear reset */
200 	{0x03, 0x07}, /* QPSK, DVB, Auto Acquisition (default) */
201 	{0x04, 0x10}, /* MPEG */
202 	{0x05, 0x04}, /* MPEG */
203 	{0x06, 0x31}, /* MPEG (default) */
204 	{0x0b, 0x00}, /* Freq search start point (default) */
205 	{0x0c, 0x00}, /* Demodulator sample gain (default) */
206 	{0x0d, 0x7f}, /* Force driver to shift until the maximum (+-10 MHz) */
207 	{0x0e, 0x03}, /* Default non-inverted, FEC 3/4 (default) */
208 	{0x0f, 0xfe}, /* FEC search mask (all supported codes) */
209 	{0x10, 0x01}, /* Default search inversion, no repeat (default) */
210 	{0x16, 0x00}, /* Enable reading of frequency */
211 	{0x17, 0x01}, /* Enable EsNO Ready Counter */
212 	{0x1c, 0x80}, /* Enable error counter */
213 	{0x20, 0x00}, /* Tuner burst clock rate = 500KHz */
214 	{0x21, 0x15}, /* Tuner burst mode, word length = 0x15 */
215 	{0x28, 0x00}, /* Enable FILTERV with positive pol., DiSEqC 2.x off */
216 	{0x29, 0x00}, /* DiSEqC LNB_DC off */
217 	{0x2a, 0xb0}, /* DiSEqC Parameters (default) */
218 	{0x2b, 0x73}, /* DiSEqC Tone Frequency (default) */
219 	{0x2c, 0x00}, /* DiSEqC Message (0x2c - 0x31) */
220 	{0x2d, 0x00},
221 	{0x2e, 0x00},
222 	{0x2f, 0x00},
223 	{0x30, 0x00},
224 	{0x31, 0x00},
225 	{0x32, 0x8c}, /* DiSEqC Parameters (default) */
226 	{0x33, 0x00}, /* Interrupts off (0x33 - 0x34) */
227 	{0x34, 0x00},
228 	{0x35, 0x03}, /* DiSEqC Tone Amplitude (default) */
229 	{0x36, 0x02}, /* DiSEqC Parameters (default) */
230 	{0x37, 0x3a}, /* DiSEqC Parameters (default) */
231 	{0x3a, 0x00}, /* Enable AGC accumulator (for signal strength) */
232 	{0x44, 0x00}, /* Constellation (default) */
233 	{0x45, 0x00}, /* Symbol count (default) */
234 	{0x46, 0x0d}, /* Symbol rate estimator on (default) */
235 	{0x56, 0xc1}, /* Error Counter = Viterbi BER */
236 	{0x57, 0xff}, /* Error Counter Window (default) */
237 	{0x5c, 0x20}, /* Acquisition AFC Expiration window (default is 0x10) */
238 	{0x67, 0x83}, /* Non-DCII symbol clock */
239 };
240 
241 static int cx24123_i2c_writereg(struct cx24123_state *state,
242 	u8 i2c_addr, int reg, int data)
243 {
244 	u8 buf[] = { reg, data };
245 	struct i2c_msg msg = {
246 		.addr = i2c_addr, .flags = 0, .buf = buf, .len = 2
247 	};
248 	int err;
249 
250 	/* printk(KERN_DEBUG "wr(%02x): %02x %02x\n", i2c_addr, reg, data); */
251 
252 	err = i2c_transfer(state->i2c, &msg, 1);
253 	if (err != 1) {
254 		printk("%s: writereg error(err == %i, reg == 0x%02x, data == 0x%02x)\n",
255 		       __func__, err, reg, data);
256 		return err;
257 	}
258 
259 	return 0;
260 }
261 
262 static int cx24123_i2c_readreg(struct cx24123_state *state, u8 i2c_addr, u8 reg)
263 {
264 	int ret;
265 	u8 b = 0;
266 	struct i2c_msg msg[] = {
267 		{ .addr = i2c_addr, .flags = 0, .buf = &reg, .len = 1 },
268 		{ .addr = i2c_addr, .flags = I2C_M_RD, .buf = &b, .len = 1 }
269 	};
270 
271 	ret = i2c_transfer(state->i2c, msg, 2);
272 
273 	if (ret != 2) {
274 		err("%s: reg=0x%x (error=%d)\n", __func__, reg, ret);
275 		return ret;
276 	}
277 
278 	/* printk(KERN_DEBUG "rd(%02x): %02x %02x\n", i2c_addr, reg, b); */
279 
280 	return b;
281 }
282 
283 #define cx24123_readreg(state, reg) \
284 	cx24123_i2c_readreg(state, state->config->demod_address, reg)
285 #define cx24123_writereg(state, reg, val) \
286 	cx24123_i2c_writereg(state, state->config->demod_address, reg, val)
287 
288 static int cx24123_set_inversion(struct cx24123_state *state,
289 				 enum fe_spectral_inversion inversion)
290 {
291 	u8 nom_reg = cx24123_readreg(state, 0x0e);
292 	u8 auto_reg = cx24123_readreg(state, 0x10);
293 
294 	switch (inversion) {
295 	case INVERSION_OFF:
296 		dprintk("inversion off\n");
297 		cx24123_writereg(state, 0x0e, nom_reg & ~0x80);
298 		cx24123_writereg(state, 0x10, auto_reg | 0x80);
299 		break;
300 	case INVERSION_ON:
301 		dprintk("inversion on\n");
302 		cx24123_writereg(state, 0x0e, nom_reg | 0x80);
303 		cx24123_writereg(state, 0x10, auto_reg | 0x80);
304 		break;
305 	case INVERSION_AUTO:
306 		dprintk("inversion auto\n");
307 		cx24123_writereg(state, 0x10, auto_reg & ~0x80);
308 		break;
309 	default:
310 		return -EINVAL;
311 	}
312 
313 	return 0;
314 }
315 
316 static int cx24123_get_inversion(struct cx24123_state *state,
317 				 enum fe_spectral_inversion *inversion)
318 {
319 	u8 val;
320 
321 	val = cx24123_readreg(state, 0x1b) >> 7;
322 
323 	if (val == 0) {
324 		dprintk("read inversion off\n");
325 		*inversion = INVERSION_OFF;
326 	} else {
327 		dprintk("read inversion on\n");
328 		*inversion = INVERSION_ON;
329 	}
330 
331 	return 0;
332 }
333 
334 static int cx24123_set_fec(struct cx24123_state *state, enum fe_code_rate fec)
335 {
336 	u8 nom_reg = cx24123_readreg(state, 0x0e) & ~0x07;
337 
338 	if (((int)fec < FEC_NONE) || (fec > FEC_AUTO))
339 		fec = FEC_AUTO;
340 
341 	/* Set the soft decision threshold */
342 	if (fec == FEC_1_2)
343 		cx24123_writereg(state, 0x43,
344 			cx24123_readreg(state, 0x43) | 0x01);
345 	else
346 		cx24123_writereg(state, 0x43,
347 			cx24123_readreg(state, 0x43) & ~0x01);
348 
349 	switch (fec) {
350 	case FEC_1_2:
351 		dprintk("set FEC to 1/2\n");
352 		cx24123_writereg(state, 0x0e, nom_reg | 0x01);
353 		cx24123_writereg(state, 0x0f, 0x02);
354 		break;
355 	case FEC_2_3:
356 		dprintk("set FEC to 2/3\n");
357 		cx24123_writereg(state, 0x0e, nom_reg | 0x02);
358 		cx24123_writereg(state, 0x0f, 0x04);
359 		break;
360 	case FEC_3_4:
361 		dprintk("set FEC to 3/4\n");
362 		cx24123_writereg(state, 0x0e, nom_reg | 0x03);
363 		cx24123_writereg(state, 0x0f, 0x08);
364 		break;
365 	case FEC_4_5:
366 		dprintk("set FEC to 4/5\n");
367 		cx24123_writereg(state, 0x0e, nom_reg | 0x04);
368 		cx24123_writereg(state, 0x0f, 0x10);
369 		break;
370 	case FEC_5_6:
371 		dprintk("set FEC to 5/6\n");
372 		cx24123_writereg(state, 0x0e, nom_reg | 0x05);
373 		cx24123_writereg(state, 0x0f, 0x20);
374 		break;
375 	case FEC_6_7:
376 		dprintk("set FEC to 6/7\n");
377 		cx24123_writereg(state, 0x0e, nom_reg | 0x06);
378 		cx24123_writereg(state, 0x0f, 0x40);
379 		break;
380 	case FEC_7_8:
381 		dprintk("set FEC to 7/8\n");
382 		cx24123_writereg(state, 0x0e, nom_reg | 0x07);
383 		cx24123_writereg(state, 0x0f, 0x80);
384 		break;
385 	case FEC_AUTO:
386 		dprintk("set FEC to auto\n");
387 		cx24123_writereg(state, 0x0f, 0xfe);
388 		break;
389 	default:
390 		return -EOPNOTSUPP;
391 	}
392 
393 	return 0;
394 }
395 
396 static int cx24123_get_fec(struct cx24123_state *state, enum fe_code_rate *fec)
397 {
398 	int ret;
399 
400 	ret = cx24123_readreg(state, 0x1b);
401 	if (ret < 0)
402 		return ret;
403 	ret = ret & 0x07;
404 
405 	switch (ret) {
406 	case 1:
407 		*fec = FEC_1_2;
408 		break;
409 	case 2:
410 		*fec = FEC_2_3;
411 		break;
412 	case 3:
413 		*fec = FEC_3_4;
414 		break;
415 	case 4:
416 		*fec = FEC_4_5;
417 		break;
418 	case 5:
419 		*fec = FEC_5_6;
420 		break;
421 	case 6:
422 		*fec = FEC_6_7;
423 		break;
424 	case 7:
425 		*fec = FEC_7_8;
426 		break;
427 	default:
428 		/* this can happen when there's no lock */
429 		*fec = FEC_NONE;
430 	}
431 
432 	return 0;
433 }
434 
435 /* Approximation of closest integer of log2(a/b). It actually gives the
436    lowest integer i such that 2^i >= round(a/b) */
437 static u32 cx24123_int_log2(u32 a, u32 b)
438 {
439 	u32 exp, nearest = 0;
440 	u32 div = a / b;
441 	if (a % b >= b / 2)
442 		++div;
443 	if (div < (1 << 31)) {
444 		for (exp = 1; div > exp; nearest++)
445 			exp += exp;
446 	}
447 	return nearest;
448 }
449 
450 static int cx24123_set_symbolrate(struct cx24123_state *state, u32 srate)
451 {
452 	u64 tmp;
453 	u32 sample_rate, ratio, sample_gain;
454 	u8 pll_mult;
455 
456 	/*  check if symbol rate is within limits */
457 	if ((srate > state->frontend.ops.info.symbol_rate_max) ||
458 	    (srate < state->frontend.ops.info.symbol_rate_min))
459 		return -EOPNOTSUPP;
460 
461 	/* choose the sampling rate high enough for the required operation,
462 	   while optimizing the power consumed by the demodulator */
463 	if (srate < (XTAL*2)/2)
464 		pll_mult = 2;
465 	else if (srate < (XTAL*3)/2)
466 		pll_mult = 3;
467 	else if (srate < (XTAL*4)/2)
468 		pll_mult = 4;
469 	else if (srate < (XTAL*5)/2)
470 		pll_mult = 5;
471 	else if (srate < (XTAL*6)/2)
472 		pll_mult = 6;
473 	else if (srate < (XTAL*7)/2)
474 		pll_mult = 7;
475 	else if (srate < (XTAL*8)/2)
476 		pll_mult = 8;
477 	else
478 		pll_mult = 9;
479 
480 
481 	sample_rate = pll_mult * XTAL;
482 
483 	/* SYSSymbolRate[21:0] = (srate << 23) / sample_rate */
484 
485 	tmp = ((u64)srate) << 23;
486 	do_div(tmp, sample_rate);
487 	ratio = (u32) tmp;
488 
489 	cx24123_writereg(state, 0x01, pll_mult * 6);
490 
491 	cx24123_writereg(state, 0x08, (ratio >> 16) & 0x3f);
492 	cx24123_writereg(state, 0x09, (ratio >> 8) & 0xff);
493 	cx24123_writereg(state, 0x0a, ratio & 0xff);
494 
495 	/* also set the demodulator sample gain */
496 	sample_gain = cx24123_int_log2(sample_rate, srate);
497 	tmp = cx24123_readreg(state, 0x0c) & ~0xe0;
498 	cx24123_writereg(state, 0x0c, tmp | sample_gain << 5);
499 
500 	dprintk("srate=%d, ratio=0x%08x, sample_rate=%i sample_gain=%d\n",
501 		srate, ratio, sample_rate, sample_gain);
502 
503 	return 0;
504 }
505 
506 /*
507  * Based on the required frequency and symbolrate, the tuner AGC has
508  * to be configured and the correct band selected.
509  * Calculate those values.
510  */
511 static int cx24123_pll_calculate(struct dvb_frontend *fe)
512 {
513 	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
514 	struct cx24123_state *state = fe->demodulator_priv;
515 	u32 ndiv = 0, adiv = 0, vco_div = 0;
516 	int i = 0;
517 	int pump = 2;
518 	int band = 0;
519 	int num_bands = ARRAY_SIZE(cx24123_bandselect_vals);
520 	struct cx24123_bandselect_val *bsv = NULL;
521 	struct cx24123_AGC_val *agcv = NULL;
522 
523 	/* Defaults for low freq, low rate */
524 	state->VCAarg = cx24123_AGC_vals[0].VCAprogdata;
525 	state->VGAarg = cx24123_AGC_vals[0].VGAprogdata;
526 	state->bandselectarg = cx24123_bandselect_vals[0].progdata;
527 	vco_div = cx24123_bandselect_vals[0].VCOdivider;
528 
529 	/* For the given symbol rate, determine the VCA, VGA and
530 	 * FILTUNE programming bits */
531 	for (i = 0; i < ARRAY_SIZE(cx24123_AGC_vals); i++) {
532 		agcv = &cx24123_AGC_vals[i];
533 		if ((agcv->symbolrate_low <= p->symbol_rate) &&
534 		    (agcv->symbolrate_high >= p->symbol_rate)) {
535 			state->VCAarg = agcv->VCAprogdata;
536 			state->VGAarg = agcv->VGAprogdata;
537 			state->FILTune = agcv->FILTune;
538 		}
539 	}
540 
541 	/* determine the band to use */
542 	if (force_band < 1 || force_band > num_bands) {
543 		for (i = 0; i < num_bands; i++) {
544 			bsv = &cx24123_bandselect_vals[i];
545 			if ((bsv->freq_low <= p->frequency) &&
546 				(bsv->freq_high >= p->frequency))
547 				band = i;
548 		}
549 	} else
550 		band = force_band - 1;
551 
552 	state->bandselectarg = cx24123_bandselect_vals[band].progdata;
553 	vco_div = cx24123_bandselect_vals[band].VCOdivider;
554 
555 	/* determine the charge pump current */
556 	if (p->frequency < (cx24123_bandselect_vals[band].freq_low +
557 		cx24123_bandselect_vals[band].freq_high) / 2)
558 		pump = 0x01;
559 	else
560 		pump = 0x02;
561 
562 	/* Determine the N/A dividers for the requested lband freq (in kHz). */
563 	/* Note: the reference divider R=10, frequency is in KHz,
564 	 * XTAL is in Hz */
565 	ndiv = (((p->frequency * vco_div * 10) /
566 		(2 * XTAL / 1000)) / 32) & 0x1ff;
567 	adiv = (((p->frequency * vco_div * 10) /
568 		(2 * XTAL / 1000)) % 32) & 0x1f;
569 
570 	if (adiv == 0 && ndiv > 0)
571 		ndiv--;
572 
573 	/* control bits 11, refdiv 11, charge pump polarity 1,
574 	 * charge pump current, ndiv, adiv */
575 	state->pllarg = (3 << 19) | (3 << 17) | (1 << 16) |
576 		(pump << 14) | (ndiv << 5) | adiv;
577 
578 	return 0;
579 }
580 
581 /*
582  * Tuner data is 21 bits long, must be left-aligned in data.
583  * Tuner cx24109 is written through a dedicated 3wire interface
584  * on the demod chip.
585  */
586 static int cx24123_pll_writereg(struct dvb_frontend *fe, u32 data)
587 {
588 	struct cx24123_state *state = fe->demodulator_priv;
589 	unsigned long timeout;
590 
591 	dprintk("pll writereg called, data=0x%08x\n", data);
592 
593 	/* align the 21 bytes into to bit23 boundary */
594 	data = data << 3;
595 
596 	/* Reset the demod pll word length to 0x15 bits */
597 	cx24123_writereg(state, 0x21, 0x15);
598 
599 	/* write the msb 8 bits, wait for the send to be completed */
600 	timeout = jiffies + msecs_to_jiffies(40);
601 	cx24123_writereg(state, 0x22, (data >> 16) & 0xff);
602 	while ((cx24123_readreg(state, 0x20) & 0x40) == 0) {
603 		if (time_after(jiffies, timeout)) {
604 			err("%s:  demodulator is not responding, "\
605 				"possibly hung, aborting.\n", __func__);
606 			return -EREMOTEIO;
607 		}
608 		msleep(10);
609 	}
610 
611 	/* send another 8 bytes, wait for the send to be completed */
612 	timeout = jiffies + msecs_to_jiffies(40);
613 	cx24123_writereg(state, 0x22, (data >> 8) & 0xff);
614 	while ((cx24123_readreg(state, 0x20) & 0x40) == 0) {
615 		if (time_after(jiffies, timeout)) {
616 			err("%s:  demodulator is not responding, "\
617 				"possibly hung, aborting.\n", __func__);
618 			return -EREMOTEIO;
619 		}
620 		msleep(10);
621 	}
622 
623 	/* send the lower 5 bits of this byte, padded with 3 LBB,
624 	 * wait for the send to be completed */
625 	timeout = jiffies + msecs_to_jiffies(40);
626 	cx24123_writereg(state, 0x22, (data) & 0xff);
627 	while ((cx24123_readreg(state, 0x20) & 0x80)) {
628 		if (time_after(jiffies, timeout)) {
629 			err("%s:  demodulator is not responding," \
630 				"possibly hung, aborting.\n", __func__);
631 			return -EREMOTEIO;
632 		}
633 		msleep(10);
634 	}
635 
636 	/* Trigger the demod to configure the tuner */
637 	cx24123_writereg(state, 0x20, cx24123_readreg(state, 0x20) | 2);
638 	cx24123_writereg(state, 0x20, cx24123_readreg(state, 0x20) & 0xfd);
639 
640 	return 0;
641 }
642 
643 static int cx24123_pll_tune(struct dvb_frontend *fe)
644 {
645 	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
646 	struct cx24123_state *state = fe->demodulator_priv;
647 	u8 val;
648 
649 	dprintk("frequency=%i\n", p->frequency);
650 
651 	if (cx24123_pll_calculate(fe) != 0) {
652 		err("%s: cx24123_pll_calculate failed\n", __func__);
653 		return -EINVAL;
654 	}
655 
656 	/* Write the new VCO/VGA */
657 	cx24123_pll_writereg(fe, state->VCAarg);
658 	cx24123_pll_writereg(fe, state->VGAarg);
659 
660 	/* Write the new bandselect and pll args */
661 	cx24123_pll_writereg(fe, state->bandselectarg);
662 	cx24123_pll_writereg(fe, state->pllarg);
663 
664 	/* set the FILTUNE voltage */
665 	val = cx24123_readreg(state, 0x28) & ~0x3;
666 	cx24123_writereg(state, 0x27, state->FILTune >> 2);
667 	cx24123_writereg(state, 0x28, val | (state->FILTune & 0x3));
668 
669 	dprintk("pll tune VCA=%d, band=%d, pll=%d\n", state->VCAarg,
670 			state->bandselectarg, state->pllarg);
671 
672 	return 0;
673 }
674 
675 
676 /*
677  * 0x23:
678  *    [7:7] = BTI enabled
679  *    [6:6] = I2C repeater enabled
680  *    [5:5] = I2C repeater start
681  *    [0:0] = BTI start
682  */
683 
684 /* mode == 1 -> i2c-repeater, 0 -> bti */
685 static int cx24123_repeater_mode(struct cx24123_state *state, u8 mode, u8 start)
686 {
687 	u8 r = cx24123_readreg(state, 0x23) & 0x1e;
688 	if (mode)
689 		r |= (1 << 6) | (start << 5);
690 	else
691 		r |= (1 << 7) | (start);
692 	return cx24123_writereg(state, 0x23, r);
693 }
694 
695 static int cx24123_initfe(struct dvb_frontend *fe)
696 {
697 	struct cx24123_state *state = fe->demodulator_priv;
698 	int i;
699 
700 	dprintk("init frontend\n");
701 
702 	/* Configure the demod to a good set of defaults */
703 	for (i = 0; i < ARRAY_SIZE(cx24123_regdata); i++)
704 		cx24123_writereg(state, cx24123_regdata[i].reg,
705 			cx24123_regdata[i].data);
706 
707 	/* Set the LNB polarity */
708 	if (state->config->lnb_polarity)
709 		cx24123_writereg(state, 0x32,
710 			cx24123_readreg(state, 0x32) | 0x02);
711 
712 	if (state->config->dont_use_pll)
713 		cx24123_repeater_mode(state, 1, 0);
714 
715 	return 0;
716 }
717 
718 static int cx24123_set_voltage(struct dvb_frontend *fe,
719 			       enum fe_sec_voltage voltage)
720 {
721 	struct cx24123_state *state = fe->demodulator_priv;
722 	u8 val;
723 
724 	val = cx24123_readreg(state, 0x29) & ~0x40;
725 
726 	switch (voltage) {
727 	case SEC_VOLTAGE_13:
728 		dprintk("setting voltage 13V\n");
729 		return cx24123_writereg(state, 0x29, val & 0x7f);
730 	case SEC_VOLTAGE_18:
731 		dprintk("setting voltage 18V\n");
732 		return cx24123_writereg(state, 0x29, val | 0x80);
733 	case SEC_VOLTAGE_OFF:
734 		/* already handled in cx88-dvb */
735 		return 0;
736 	default:
737 		return -EINVAL;
738 	}
739 
740 	return 0;
741 }
742 
743 /* wait for diseqc queue to become ready (or timeout) */
744 static void cx24123_wait_for_diseqc(struct cx24123_state *state)
745 {
746 	unsigned long timeout = jiffies + msecs_to_jiffies(200);
747 	while (!(cx24123_readreg(state, 0x29) & 0x40)) {
748 		if (time_after(jiffies, timeout)) {
749 			err("%s: diseqc queue not ready, " \
750 				"command may be lost.\n", __func__);
751 			break;
752 		}
753 		msleep(10);
754 	}
755 }
756 
757 static int cx24123_send_diseqc_msg(struct dvb_frontend *fe,
758 	struct dvb_diseqc_master_cmd *cmd)
759 {
760 	struct cx24123_state *state = fe->demodulator_priv;
761 	int i, val, tone;
762 
763 	dprintk("\n");
764 
765 	/* stop continuous tone if enabled */
766 	tone = cx24123_readreg(state, 0x29);
767 	if (tone & 0x10)
768 		cx24123_writereg(state, 0x29, tone & ~0x50);
769 
770 	/* wait for diseqc queue ready */
771 	cx24123_wait_for_diseqc(state);
772 
773 	/* select tone mode */
774 	cx24123_writereg(state, 0x2a, cx24123_readreg(state, 0x2a) & 0xfb);
775 
776 	for (i = 0; i < cmd->msg_len; i++)
777 		cx24123_writereg(state, 0x2C + i, cmd->msg[i]);
778 
779 	val = cx24123_readreg(state, 0x29);
780 	cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40) |
781 		((cmd->msg_len-3) & 3));
782 
783 	/* wait for diseqc message to finish sending */
784 	cx24123_wait_for_diseqc(state);
785 
786 	/* restart continuous tone if enabled */
787 	if (tone & 0x10)
788 		cx24123_writereg(state, 0x29, tone & ~0x40);
789 
790 	return 0;
791 }
792 
793 static int cx24123_diseqc_send_burst(struct dvb_frontend *fe,
794 				     enum fe_sec_mini_cmd burst)
795 {
796 	struct cx24123_state *state = fe->demodulator_priv;
797 	int val, tone;
798 
799 	dprintk("\n");
800 
801 	/* stop continuous tone if enabled */
802 	tone = cx24123_readreg(state, 0x29);
803 	if (tone & 0x10)
804 		cx24123_writereg(state, 0x29, tone & ~0x50);
805 
806 	/* wait for diseqc queue ready */
807 	cx24123_wait_for_diseqc(state);
808 
809 	/* select tone mode */
810 	cx24123_writereg(state, 0x2a, cx24123_readreg(state, 0x2a) | 0x4);
811 	msleep(30);
812 	val = cx24123_readreg(state, 0x29);
813 	if (burst == SEC_MINI_A)
814 		cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40 | 0x00));
815 	else if (burst == SEC_MINI_B)
816 		cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40 | 0x08));
817 	else
818 		return -EINVAL;
819 
820 	cx24123_wait_for_diseqc(state);
821 	cx24123_writereg(state, 0x2a, cx24123_readreg(state, 0x2a) & 0xfb);
822 
823 	/* restart continuous tone if enabled */
824 	if (tone & 0x10)
825 		cx24123_writereg(state, 0x29, tone & ~0x40);
826 
827 	return 0;
828 }
829 
830 static int cx24123_read_status(struct dvb_frontend *fe, enum fe_status *status)
831 {
832 	struct cx24123_state *state = fe->demodulator_priv;
833 	int sync = cx24123_readreg(state, 0x14);
834 
835 	*status = 0;
836 	if (state->config->dont_use_pll) {
837 		u32 tun_status = 0;
838 		if (fe->ops.tuner_ops.get_status)
839 			fe->ops.tuner_ops.get_status(fe, &tun_status);
840 		if (tun_status & TUNER_STATUS_LOCKED)
841 			*status |= FE_HAS_SIGNAL;
842 	} else {
843 		int lock = cx24123_readreg(state, 0x20);
844 		if (lock & 0x01)
845 			*status |= FE_HAS_SIGNAL;
846 	}
847 
848 	if (sync & 0x02)
849 		*status |= FE_HAS_CARRIER;	/* Phase locked */
850 	if (sync & 0x04)
851 		*status |= FE_HAS_VITERBI;
852 
853 	/* Reed-Solomon Status */
854 	if (sync & 0x08)
855 		*status |= FE_HAS_SYNC;
856 	if (sync & 0x80)
857 		*status |= FE_HAS_LOCK;		/*Full Sync */
858 
859 	return 0;
860 }
861 
862 /*
863  * Configured to return the measurement of errors in blocks,
864  * because no UCBLOCKS value is available, so this value doubles up
865  * to satisfy both measurements.
866  */
867 static int cx24123_read_ber(struct dvb_frontend *fe, u32 *ber)
868 {
869 	struct cx24123_state *state = fe->demodulator_priv;
870 
871 	/* The true bit error rate is this value divided by
872 	   the window size (set as 256 * 255) */
873 	*ber = ((cx24123_readreg(state, 0x1c) & 0x3f) << 16) |
874 		(cx24123_readreg(state, 0x1d) << 8 |
875 		 cx24123_readreg(state, 0x1e));
876 
877 	dprintk("BER = %d\n", *ber);
878 
879 	return 0;
880 }
881 
882 static int cx24123_read_signal_strength(struct dvb_frontend *fe,
883 	u16 *signal_strength)
884 {
885 	struct cx24123_state *state = fe->demodulator_priv;
886 
887 	/* larger = better */
888 	*signal_strength = cx24123_readreg(state, 0x3b) << 8;
889 
890 	dprintk("Signal strength = %d\n", *signal_strength);
891 
892 	return 0;
893 }
894 
895 static int cx24123_read_snr(struct dvb_frontend *fe, u16 *snr)
896 {
897 	struct cx24123_state *state = fe->demodulator_priv;
898 
899 	/* Inverted raw Es/N0 count, totally bogus but better than the
900 	   BER threshold. */
901 	*snr = 65535 - (((u16)cx24123_readreg(state, 0x18) << 8) |
902 			 (u16)cx24123_readreg(state, 0x19));
903 
904 	dprintk("read S/N index = %d\n", *snr);
905 
906 	return 0;
907 }
908 
909 static int cx24123_set_frontend(struct dvb_frontend *fe)
910 {
911 	struct cx24123_state *state = fe->demodulator_priv;
912 	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
913 
914 	dprintk("\n");
915 
916 	if (state->config->set_ts_params)
917 		state->config->set_ts_params(fe, 0);
918 
919 	state->currentfreq = p->frequency;
920 	state->currentsymbolrate = p->symbol_rate;
921 
922 	cx24123_set_inversion(state, p->inversion);
923 	cx24123_set_fec(state, p->fec_inner);
924 	cx24123_set_symbolrate(state, p->symbol_rate);
925 
926 	if (!state->config->dont_use_pll)
927 		cx24123_pll_tune(fe);
928 	else if (fe->ops.tuner_ops.set_params)
929 		fe->ops.tuner_ops.set_params(fe);
930 	else
931 		err("it seems I don't have a tuner...");
932 
933 	/* Enable automatic acquisition and reset cycle */
934 	cx24123_writereg(state, 0x03, (cx24123_readreg(state, 0x03) | 0x07));
935 	cx24123_writereg(state, 0x00, 0x10);
936 	cx24123_writereg(state, 0x00, 0);
937 
938 	if (state->config->agc_callback)
939 		state->config->agc_callback(fe);
940 
941 	return 0;
942 }
943 
944 static int cx24123_get_frontend(struct dvb_frontend *fe,
945 				struct dtv_frontend_properties *p)
946 {
947 	struct cx24123_state *state = fe->demodulator_priv;
948 
949 	dprintk("\n");
950 
951 	if (cx24123_get_inversion(state, &p->inversion) != 0) {
952 		err("%s: Failed to get inversion status\n", __func__);
953 		return -EREMOTEIO;
954 	}
955 	if (cx24123_get_fec(state, &p->fec_inner) != 0) {
956 		err("%s: Failed to get fec status\n", __func__);
957 		return -EREMOTEIO;
958 	}
959 	p->frequency = state->currentfreq;
960 	p->symbol_rate = state->currentsymbolrate;
961 
962 	return 0;
963 }
964 
965 static int cx24123_set_tone(struct dvb_frontend *fe, enum fe_sec_tone_mode tone)
966 {
967 	struct cx24123_state *state = fe->demodulator_priv;
968 	u8 val;
969 
970 	/* wait for diseqc queue ready */
971 	cx24123_wait_for_diseqc(state);
972 
973 	val = cx24123_readreg(state, 0x29) & ~0x40;
974 
975 	switch (tone) {
976 	case SEC_TONE_ON:
977 		dprintk("setting tone on\n");
978 		return cx24123_writereg(state, 0x29, val | 0x10);
979 	case SEC_TONE_OFF:
980 		dprintk("setting tone off\n");
981 		return cx24123_writereg(state, 0x29, val & 0xef);
982 	default:
983 		err("CASE reached default with tone=%d\n", tone);
984 		return -EINVAL;
985 	}
986 
987 	return 0;
988 }
989 
990 static int cx24123_tune(struct dvb_frontend *fe,
991 			bool re_tune,
992 			unsigned int mode_flags,
993 			unsigned int *delay,
994 			enum fe_status *status)
995 {
996 	int retval = 0;
997 
998 	if (re_tune)
999 		retval = cx24123_set_frontend(fe);
1000 
1001 	if (!(mode_flags & FE_TUNE_MODE_ONESHOT))
1002 		cx24123_read_status(fe, status);
1003 	*delay = HZ/10;
1004 
1005 	return retval;
1006 }
1007 
1008 static enum dvbfe_algo cx24123_get_algo(struct dvb_frontend *fe)
1009 {
1010 	return DVBFE_ALGO_HW;
1011 }
1012 
1013 static void cx24123_release(struct dvb_frontend *fe)
1014 {
1015 	struct cx24123_state *state = fe->demodulator_priv;
1016 	dprintk("\n");
1017 	i2c_del_adapter(&state->tuner_i2c_adapter);
1018 	kfree(state);
1019 }
1020 
1021 static int cx24123_tuner_i2c_tuner_xfer(struct i2c_adapter *i2c_adap,
1022 	struct i2c_msg msg[], int num)
1023 {
1024 	struct cx24123_state *state = i2c_get_adapdata(i2c_adap);
1025 	/* this repeater closes after the first stop */
1026 	cx24123_repeater_mode(state, 1, 1);
1027 	return i2c_transfer(state->i2c, msg, num);
1028 }
1029 
1030 static u32 cx24123_tuner_i2c_func(struct i2c_adapter *adapter)
1031 {
1032 	return I2C_FUNC_I2C;
1033 }
1034 
1035 static const struct i2c_algorithm cx24123_tuner_i2c_algo = {
1036 	.master_xfer   = cx24123_tuner_i2c_tuner_xfer,
1037 	.functionality = cx24123_tuner_i2c_func,
1038 };
1039 
1040 struct i2c_adapter *
1041 	cx24123_get_tuner_i2c_adapter(struct dvb_frontend *fe)
1042 {
1043 	struct cx24123_state *state = fe->demodulator_priv;
1044 	return &state->tuner_i2c_adapter;
1045 }
1046 EXPORT_SYMBOL(cx24123_get_tuner_i2c_adapter);
1047 
1048 static const struct dvb_frontend_ops cx24123_ops;
1049 
1050 struct dvb_frontend *cx24123_attach(const struct cx24123_config *config,
1051 				    struct i2c_adapter *i2c)
1052 {
1053 	/* allocate memory for the internal state */
1054 	struct cx24123_state *state =
1055 		kzalloc(sizeof(struct cx24123_state), GFP_KERNEL);
1056 
1057 	dprintk("\n");
1058 	if (state == NULL) {
1059 		err("Unable to kzalloc\n");
1060 		goto error;
1061 	}
1062 
1063 	/* setup the state */
1064 	state->config = config;
1065 	state->i2c = i2c;
1066 
1067 	/* check if the demod is there */
1068 	state->demod_rev = cx24123_readreg(state, 0x00);
1069 	switch (state->demod_rev) {
1070 	case 0xe1:
1071 		info("detected CX24123C\n");
1072 		break;
1073 	case 0xd1:
1074 		info("detected CX24123\n");
1075 		break;
1076 	default:
1077 		err("wrong demod revision: %x\n", state->demod_rev);
1078 		goto error;
1079 	}
1080 
1081 	/* create dvb_frontend */
1082 	memcpy(&state->frontend.ops, &cx24123_ops,
1083 		sizeof(struct dvb_frontend_ops));
1084 	state->frontend.demodulator_priv = state;
1085 
1086 	/* create tuner i2c adapter */
1087 	if (config->dont_use_pll)
1088 		cx24123_repeater_mode(state, 1, 0);
1089 
1090 	strscpy(state->tuner_i2c_adapter.name, "CX24123 tuner I2C bus",
1091 		sizeof(state->tuner_i2c_adapter.name));
1092 	state->tuner_i2c_adapter.algo      = &cx24123_tuner_i2c_algo;
1093 	state->tuner_i2c_adapter.algo_data = NULL;
1094 	state->tuner_i2c_adapter.dev.parent = i2c->dev.parent;
1095 	i2c_set_adapdata(&state->tuner_i2c_adapter, state);
1096 	if (i2c_add_adapter(&state->tuner_i2c_adapter) < 0) {
1097 		err("tuner i2c bus could not be initialized\n");
1098 		goto error;
1099 	}
1100 
1101 	return &state->frontend;
1102 
1103 error:
1104 	kfree(state);
1105 
1106 	return NULL;
1107 }
1108 EXPORT_SYMBOL(cx24123_attach);
1109 
1110 static const struct dvb_frontend_ops cx24123_ops = {
1111 	.delsys = { SYS_DVBS },
1112 	.info = {
1113 		.name = "Conexant CX24123/CX24109",
1114 		.frequency_min_hz =  950 * MHz,
1115 		.frequency_max_hz = 2150 * MHz,
1116 		.frequency_stepsize_hz = 1011 * kHz,
1117 		.frequency_tolerance_hz = 5 * MHz,
1118 		.symbol_rate_min = 1000000,
1119 		.symbol_rate_max = 45000000,
1120 		.caps = FE_CAN_INVERSION_AUTO |
1121 			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
1122 			FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
1123 			FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
1124 			FE_CAN_QPSK | FE_CAN_RECOVER
1125 	},
1126 
1127 	.release = cx24123_release,
1128 
1129 	.init = cx24123_initfe,
1130 	.set_frontend = cx24123_set_frontend,
1131 	.get_frontend = cx24123_get_frontend,
1132 	.read_status = cx24123_read_status,
1133 	.read_ber = cx24123_read_ber,
1134 	.read_signal_strength = cx24123_read_signal_strength,
1135 	.read_snr = cx24123_read_snr,
1136 	.diseqc_send_master_cmd = cx24123_send_diseqc_msg,
1137 	.diseqc_send_burst = cx24123_diseqc_send_burst,
1138 	.set_tone = cx24123_set_tone,
1139 	.set_voltage = cx24123_set_voltage,
1140 	.tune = cx24123_tune,
1141 	.get_frontend_algo = cx24123_get_algo,
1142 };
1143 
1144 MODULE_DESCRIPTION("DVB Frontend module for Conexant " \
1145 	"CX24123/CX24109/CX24113 hardware");
1146 MODULE_AUTHOR("Steven Toth");
1147 MODULE_LICENSE("GPL");
1148 
1149