xref: /linux/drivers/media/dvb-frontends/bsbe1.h (revision 0d456bad36d42d16022be045c8a53ddbb59ee478)
1 /*
2  * bsbe1.h - ALPS BSBE1 tuner support
3  *
4  * This program is free software; you can redistribute it and/or
5  * modify it under the terms of the GNU General Public License
6  * as published by the Free Software Foundation; either version 2
7  * of the License, or (at your option) any later version.
8  *
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  *
15  *
16  * You should have received a copy of the GNU General Public License
17  * along with this program; if not, write to the Free Software
18  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19  * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
20  *
21  *
22  * the project's page is at http://www.linuxtv.org
23  */
24 
25 #ifndef BSBE1_H
26 #define BSBE1_H
27 
28 static u8 alps_bsbe1_inittab[] = {
29 	0x01, 0x15,   /* XTAL = 4MHz, VCO = 352 MHz */
30 	0x02, 0x30,   /* MCLK = 88 MHz */
31 	0x03, 0x00,   /* ACR output 0 */
32 	0x04, 0x7d,   /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
33 	0x05, 0x05,   /* I2CT = 0, SCLT = 1, SDAT = 1 */
34 	0x06, 0x00,   /* DAC output 0 */
35 	0x08, 0x40,   /* DiSEqC off, LNB power on OP2/LOCK pin on */
36 	0x09, 0x00,   /* FIFO */
37 	0x0c, 0x51,   /* OP1/OP0 normal, val = 1 (LNB power on) */
38 	0x0d, 0x82,   /* DC offset compensation = on, beta_agc1 = 2 */
39 	0x0f, 0x92,   /* AGC1R */
40 	0x10, 0x34,   /* AGC2O */
41 	0x11, 0x84,   /* TLSR */
42 	0x12, 0xb9,   /* CFD */
43 	0x15, 0xc9,   /* lock detector threshold */
44 	0x28, 0x00,   /* out imp: normal, type: parallel, FEC mode: QPSK */
45 	0x33, 0xfc,   /* RS control */
46 	0x34, 0x93,   /* count viterbi bit errors per 2E18 bytes */
47 	0xff, 0xff
48 };
49 
50 
51 static int alps_bsbe1_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
52 {
53 	u8 aclk = 0;
54 	u8 bclk = 0;
55 
56 	if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
57 	else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
58 	else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
59 	else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
60 	else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
61 	else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
62 
63 	stv0299_writereg(fe, 0x13, aclk);
64 	stv0299_writereg(fe, 0x14, bclk);
65 	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
66 	stv0299_writereg(fe, 0x20, (ratio >>  8) & 0xff);
67 	stv0299_writereg(fe, 0x21, (ratio      ) & 0xf0);
68 
69 	return 0;
70 }
71 
72 static int alps_bsbe1_tuner_set_params(struct dvb_frontend *fe)
73 {
74 	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
75 	int ret;
76 	u8 data[4];
77 	u32 div;
78 	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
79 	struct i2c_adapter *i2c = fe->tuner_priv;
80 
81 	if ((p->frequency < 950000) || (p->frequency > 2150000))
82 		return -EINVAL;
83 
84 	div = p->frequency / 1000;
85 	data[0] = (div >> 8) & 0x7f;
86 	data[1] = div & 0xff;
87 	data[2] = 0x80 | ((div & 0x18000) >> 10) | 0x1;
88 	data[3] = 0xe0;
89 
90 	if (fe->ops.i2c_gate_ctrl)
91 		fe->ops.i2c_gate_ctrl(fe, 1);
92 	ret = i2c_transfer(i2c, &msg, 1);
93 	return (ret != 1) ? -EIO : 0;
94 }
95 
96 static struct stv0299_config alps_bsbe1_config = {
97 	.demod_address = 0x68,
98 	.inittab = alps_bsbe1_inittab,
99 	.mclk = 88000000UL,
100 	.invert = 1,
101 	.skip_reinit = 0,
102 	.min_delay_ms = 100,
103 	.set_symbol_rate = alps_bsbe1_set_symbol_rate,
104 };
105 
106 #endif
107