1 /* 2 saa7146.o - driver for generic saa7146-based hardware 3 4 Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de> 5 6 This program is free software; you can redistribute it and/or modify 7 it under the terms of the GNU General Public License as published by 8 the Free Software Foundation; either version 2 of the License, or 9 (at your option) any later version. 10 11 This program is distributed in the hope that it will be useful, 12 but WITHOUT ANY WARRANTY; without even the implied warranty of 13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 GNU General Public License for more details. 15 16 You should have received a copy of the GNU General Public License 17 along with this program; if not, write to the Free Software 18 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 19 */ 20 21 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 22 23 #include <media/drv-intf/saa7146.h> 24 #include <linux/module.h> 25 26 static int saa7146_num; 27 28 unsigned int saa7146_debug; 29 30 module_param(saa7146_debug, uint, 0644); 31 MODULE_PARM_DESC(saa7146_debug, "debug level (default: 0)"); 32 33 #if 0 34 static void dump_registers(struct saa7146_dev* dev) 35 { 36 int i = 0; 37 38 pr_info(" @ %li jiffies:\n", jiffies); 39 for (i = 0; i <= 0x148; i += 4) 40 pr_info("0x%03x: 0x%08x\n", i, saa7146_read(dev, i)); 41 } 42 #endif 43 44 /**************************************************************************** 45 * gpio and debi helper functions 46 ****************************************************************************/ 47 48 void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data) 49 { 50 u32 value = 0; 51 52 BUG_ON(port > 3); 53 54 value = saa7146_read(dev, GPIO_CTRL); 55 value &= ~(0xff << (8*port)); 56 value |= (data << (8*port)); 57 saa7146_write(dev, GPIO_CTRL, value); 58 } 59 60 /* This DEBI code is based on the saa7146 Stradis driver by Nathan Laredo */ 61 static inline int saa7146_wait_for_debi_done_sleep(struct saa7146_dev *dev, 62 unsigned long us1, unsigned long us2) 63 { 64 unsigned long timeout; 65 int err; 66 67 /* wait for registers to be programmed */ 68 timeout = jiffies + usecs_to_jiffies(us1); 69 while (1) { 70 err = time_after(jiffies, timeout); 71 if (saa7146_read(dev, MC2) & 2) 72 break; 73 if (err) { 74 pr_debug("%s: %s timed out while waiting for registers getting programmed\n", 75 dev->name, __func__); 76 return -ETIMEDOUT; 77 } 78 msleep(1); 79 } 80 81 /* wait for transfer to complete */ 82 timeout = jiffies + usecs_to_jiffies(us2); 83 while (1) { 84 err = time_after(jiffies, timeout); 85 if (!(saa7146_read(dev, PSR) & SPCI_DEBI_S)) 86 break; 87 saa7146_read(dev, MC2); 88 if (err) { 89 DEB_S("%s: %s timed out while waiting for transfer completion\n", 90 dev->name, __func__); 91 return -ETIMEDOUT; 92 } 93 msleep(1); 94 } 95 96 return 0; 97 } 98 99 static inline int saa7146_wait_for_debi_done_busyloop(struct saa7146_dev *dev, 100 unsigned long us1, unsigned long us2) 101 { 102 unsigned long loops; 103 104 /* wait for registers to be programmed */ 105 loops = us1; 106 while (1) { 107 if (saa7146_read(dev, MC2) & 2) 108 break; 109 if (!loops--) { 110 pr_err("%s: %s timed out while waiting for registers getting programmed\n", 111 dev->name, __func__); 112 return -ETIMEDOUT; 113 } 114 udelay(1); 115 } 116 117 /* wait for transfer to complete */ 118 loops = us2 / 5; 119 while (1) { 120 if (!(saa7146_read(dev, PSR) & SPCI_DEBI_S)) 121 break; 122 saa7146_read(dev, MC2); 123 if (!loops--) { 124 DEB_S("%s: %s timed out while waiting for transfer completion\n", 125 dev->name, __func__); 126 return -ETIMEDOUT; 127 } 128 udelay(5); 129 } 130 131 return 0; 132 } 133 134 int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop) 135 { 136 if (nobusyloop) 137 return saa7146_wait_for_debi_done_sleep(dev, 50000, 250000); 138 else 139 return saa7146_wait_for_debi_done_busyloop(dev, 50000, 250000); 140 } 141 142 /**************************************************************************** 143 * general helper functions 144 ****************************************************************************/ 145 146 /* this is videobuf_vmalloc_to_sg() from videobuf-dma-sg.c 147 make sure virt has been allocated with vmalloc_32(), otherwise the BUG() 148 may be triggered on highmem machines */ 149 static struct scatterlist* vmalloc_to_sg(unsigned char *virt, int nr_pages) 150 { 151 struct scatterlist *sglist; 152 struct page *pg; 153 int i; 154 155 sglist = kcalloc(nr_pages, sizeof(struct scatterlist), GFP_KERNEL); 156 if (NULL == sglist) 157 return NULL; 158 sg_init_table(sglist, nr_pages); 159 for (i = 0; i < nr_pages; i++, virt += PAGE_SIZE) { 160 pg = vmalloc_to_page(virt); 161 if (NULL == pg) 162 goto err; 163 BUG_ON(PageHighMem(pg)); 164 sg_set_page(&sglist[i], pg, PAGE_SIZE, 0); 165 } 166 return sglist; 167 168 err: 169 kfree(sglist); 170 return NULL; 171 } 172 173 /********************************************************************************/ 174 /* common page table functions */ 175 176 void *saa7146_vmalloc_build_pgtable(struct pci_dev *pci, long length, struct saa7146_pgtable *pt) 177 { 178 int pages = (length+PAGE_SIZE-1)/PAGE_SIZE; 179 void *mem = vmalloc_32(length); 180 int slen = 0; 181 182 if (NULL == mem) 183 goto err_null; 184 185 if (!(pt->slist = vmalloc_to_sg(mem, pages))) 186 goto err_free_mem; 187 188 if (saa7146_pgtable_alloc(pci, pt)) 189 goto err_free_slist; 190 191 pt->nents = pages; 192 slen = pci_map_sg(pci,pt->slist,pt->nents,PCI_DMA_FROMDEVICE); 193 if (0 == slen) 194 goto err_free_pgtable; 195 196 if (0 != saa7146_pgtable_build_single(pci, pt, pt->slist, slen)) 197 goto err_unmap_sg; 198 199 return mem; 200 201 err_unmap_sg: 202 pci_unmap_sg(pci, pt->slist, pt->nents, PCI_DMA_FROMDEVICE); 203 err_free_pgtable: 204 saa7146_pgtable_free(pci, pt); 205 err_free_slist: 206 kfree(pt->slist); 207 pt->slist = NULL; 208 err_free_mem: 209 vfree(mem); 210 err_null: 211 return NULL; 212 } 213 214 void saa7146_vfree_destroy_pgtable(struct pci_dev *pci, void *mem, struct saa7146_pgtable *pt) 215 { 216 pci_unmap_sg(pci, pt->slist, pt->nents, PCI_DMA_FROMDEVICE); 217 saa7146_pgtable_free(pci, pt); 218 kfree(pt->slist); 219 pt->slist = NULL; 220 vfree(mem); 221 } 222 223 void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt) 224 { 225 if (NULL == pt->cpu) 226 return; 227 pci_free_consistent(pci, pt->size, pt->cpu, pt->dma); 228 pt->cpu = NULL; 229 } 230 231 int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt) 232 { 233 __le32 *cpu; 234 dma_addr_t dma_addr = 0; 235 236 cpu = pci_alloc_consistent(pci, PAGE_SIZE, &dma_addr); 237 if (NULL == cpu) { 238 return -ENOMEM; 239 } 240 pt->size = PAGE_SIZE; 241 pt->cpu = cpu; 242 pt->dma = dma_addr; 243 244 return 0; 245 } 246 247 int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt, 248 struct scatterlist *list, int sglen ) 249 { 250 __le32 *ptr, fill; 251 int nr_pages = 0; 252 int i,p; 253 254 BUG_ON(0 == sglen); 255 BUG_ON(list->offset > PAGE_SIZE); 256 257 /* if we have a user buffer, the first page may not be 258 aligned to a page boundary. */ 259 pt->offset = list->offset; 260 261 ptr = pt->cpu; 262 for (i = 0; i < sglen; i++, list++) { 263 /* 264 pr_debug("i:%d, adr:0x%08x, len:%d, offset:%d\n", 265 i, sg_dma_address(list), sg_dma_len(list), 266 list->offset); 267 */ 268 for (p = 0; p * 4096 < list->length; p++, ptr++) { 269 *ptr = cpu_to_le32(sg_dma_address(list) + p * 4096); 270 nr_pages++; 271 } 272 } 273 274 275 /* safety; fill the page table up with the last valid page */ 276 fill = *(ptr-1); 277 for(i=nr_pages;i<1024;i++) { 278 *ptr++ = fill; 279 } 280 281 /* 282 ptr = pt->cpu; 283 pr_debug("offset: %d\n", pt->offset); 284 for(i=0;i<5;i++) { 285 pr_debug("ptr1 %d: 0x%08x\n", i, ptr[i]); 286 } 287 */ 288 return 0; 289 } 290 291 /********************************************************************************/ 292 /* interrupt handler */ 293 static irqreturn_t interrupt_hw(int irq, void *dev_id) 294 { 295 struct saa7146_dev *dev = dev_id; 296 u32 isr; 297 u32 ack_isr; 298 299 /* read out the interrupt status register */ 300 ack_isr = isr = saa7146_read(dev, ISR); 301 302 /* is this our interrupt? */ 303 if ( 0 == isr ) { 304 /* nope, some other device */ 305 return IRQ_NONE; 306 } 307 308 if (dev->ext) { 309 if (dev->ext->irq_mask & isr) { 310 if (dev->ext->irq_func) 311 dev->ext->irq_func(dev, &isr); 312 isr &= ~dev->ext->irq_mask; 313 } 314 } 315 if (0 != (isr & (MASK_27))) { 316 DEB_INT("irq: RPS0 (0x%08x)\n", isr); 317 if (dev->vv_data && dev->vv_callback) 318 dev->vv_callback(dev,isr); 319 isr &= ~MASK_27; 320 } 321 if (0 != (isr & (MASK_28))) { 322 if (dev->vv_data && dev->vv_callback) 323 dev->vv_callback(dev,isr); 324 isr &= ~MASK_28; 325 } 326 if (0 != (isr & (MASK_16|MASK_17))) { 327 SAA7146_IER_DISABLE(dev, MASK_16|MASK_17); 328 /* only wake up if we expect something */ 329 if (0 != dev->i2c_op) { 330 dev->i2c_op = 0; 331 wake_up(&dev->i2c_wq); 332 } else { 333 u32 psr = saa7146_read(dev, PSR); 334 u32 ssr = saa7146_read(dev, SSR); 335 pr_warn("%s: unexpected i2c irq: isr %08x psr %08x ssr %08x\n", 336 dev->name, isr, psr, ssr); 337 } 338 isr &= ~(MASK_16|MASK_17); 339 } 340 if( 0 != isr ) { 341 ERR("warning: interrupt enabled, but not handled properly.(0x%08x)\n", 342 isr); 343 ERR("disabling interrupt source(s)!\n"); 344 SAA7146_IER_DISABLE(dev,isr); 345 } 346 saa7146_write(dev, ISR, ack_isr); 347 return IRQ_HANDLED; 348 } 349 350 /*********************************************************************************/ 351 /* configuration-functions */ 352 353 static int saa7146_init_one(struct pci_dev *pci, const struct pci_device_id *ent) 354 { 355 struct saa7146_pci_extension_data *pci_ext = (struct saa7146_pci_extension_data *)ent->driver_data; 356 struct saa7146_extension *ext = pci_ext->ext; 357 struct saa7146_dev *dev; 358 int err = -ENOMEM; 359 360 /* clear out mem for sure */ 361 dev = kzalloc(sizeof(struct saa7146_dev), GFP_KERNEL); 362 if (!dev) { 363 ERR("out of memory\n"); 364 goto out; 365 } 366 367 /* create a nice device name */ 368 sprintf(dev->name, "saa7146 (%d)", saa7146_num); 369 370 DEB_EE("pci:%p\n", pci); 371 372 err = pci_enable_device(pci); 373 if (err < 0) { 374 ERR("pci_enable_device() failed\n"); 375 goto err_free; 376 } 377 378 /* enable bus-mastering */ 379 pci_set_master(pci); 380 381 dev->pci = pci; 382 383 /* get chip-revision; this is needed to enable bug-fixes */ 384 dev->revision = pci->revision; 385 386 /* remap the memory from virtual to physical address */ 387 388 err = pci_request_region(pci, 0, "saa7146"); 389 if (err < 0) 390 goto err_disable; 391 392 dev->mem = ioremap(pci_resource_start(pci, 0), 393 pci_resource_len(pci, 0)); 394 if (!dev->mem) { 395 ERR("ioremap() failed\n"); 396 err = -ENODEV; 397 goto err_release; 398 } 399 400 /* we don't do a master reset here anymore, it screws up 401 some boards that don't have an i2c-eeprom for configuration 402 values */ 403 /* 404 saa7146_write(dev, MC1, MASK_31); 405 */ 406 407 /* disable all irqs */ 408 saa7146_write(dev, IER, 0); 409 410 /* shut down all dma transfers and rps tasks */ 411 saa7146_write(dev, MC1, 0x30ff0000); 412 413 /* clear out any rps-signals pending */ 414 saa7146_write(dev, MC2, 0xf8000000); 415 416 /* request an interrupt for the saa7146 */ 417 err = request_irq(pci->irq, interrupt_hw, IRQF_SHARED, 418 dev->name, dev); 419 if (err < 0) { 420 ERR("request_irq() failed\n"); 421 goto err_unmap; 422 } 423 424 err = -ENOMEM; 425 426 /* get memory for various stuff */ 427 dev->d_rps0.cpu_addr = pci_zalloc_consistent(pci, SAA7146_RPS_MEM, 428 &dev->d_rps0.dma_handle); 429 if (!dev->d_rps0.cpu_addr) 430 goto err_free_irq; 431 432 dev->d_rps1.cpu_addr = pci_zalloc_consistent(pci, SAA7146_RPS_MEM, 433 &dev->d_rps1.dma_handle); 434 if (!dev->d_rps1.cpu_addr) 435 goto err_free_rps0; 436 437 dev->d_i2c.cpu_addr = pci_zalloc_consistent(pci, SAA7146_RPS_MEM, 438 &dev->d_i2c.dma_handle); 439 if (!dev->d_i2c.cpu_addr) 440 goto err_free_rps1; 441 442 /* the rest + print status message */ 443 444 pr_info("found saa7146 @ mem %p (revision %d, irq %d) (0x%04x,0x%04x)\n", 445 dev->mem, dev->revision, pci->irq, 446 pci->subsystem_vendor, pci->subsystem_device); 447 dev->ext = ext; 448 449 mutex_init(&dev->v4l2_lock); 450 spin_lock_init(&dev->int_slock); 451 spin_lock_init(&dev->slock); 452 453 mutex_init(&dev->i2c_lock); 454 455 dev->module = THIS_MODULE; 456 init_waitqueue_head(&dev->i2c_wq); 457 458 /* set some sane pci arbitrition values */ 459 saa7146_write(dev, PCI_BT_V1, 0x1c00101f); 460 461 /* TODO: use the status code of the callback */ 462 463 err = -ENODEV; 464 465 if (ext->probe && ext->probe(dev)) { 466 DEB_D("ext->probe() failed for %p. skipping device.\n", dev); 467 goto err_free_i2c; 468 } 469 470 if (ext->attach(dev, pci_ext)) { 471 DEB_D("ext->attach() failed for %p. skipping device.\n", dev); 472 goto err_free_i2c; 473 } 474 /* V4L extensions will set the pci drvdata to the v4l2_device in the 475 attach() above. So for those cards that do not use V4L we have to 476 set it explicitly. */ 477 pci_set_drvdata(pci, &dev->v4l2_dev); 478 479 saa7146_num++; 480 481 err = 0; 482 out: 483 return err; 484 485 err_free_i2c: 486 pci_free_consistent(pci, SAA7146_RPS_MEM, dev->d_i2c.cpu_addr, 487 dev->d_i2c.dma_handle); 488 err_free_rps1: 489 pci_free_consistent(pci, SAA7146_RPS_MEM, dev->d_rps1.cpu_addr, 490 dev->d_rps1.dma_handle); 491 err_free_rps0: 492 pci_free_consistent(pci, SAA7146_RPS_MEM, dev->d_rps0.cpu_addr, 493 dev->d_rps0.dma_handle); 494 err_free_irq: 495 free_irq(pci->irq, (void *)dev); 496 err_unmap: 497 iounmap(dev->mem); 498 err_release: 499 pci_release_region(pci, 0); 500 err_disable: 501 pci_disable_device(pci); 502 err_free: 503 kfree(dev); 504 goto out; 505 } 506 507 static void saa7146_remove_one(struct pci_dev *pdev) 508 { 509 struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev); 510 struct saa7146_dev *dev = to_saa7146_dev(v4l2_dev); 511 struct { 512 void *addr; 513 dma_addr_t dma; 514 } dev_map[] = { 515 { dev->d_i2c.cpu_addr, dev->d_i2c.dma_handle }, 516 { dev->d_rps1.cpu_addr, dev->d_rps1.dma_handle }, 517 { dev->d_rps0.cpu_addr, dev->d_rps0.dma_handle }, 518 { NULL, 0 } 519 }, *p; 520 521 DEB_EE("dev:%p\n", dev); 522 523 dev->ext->detach(dev); 524 525 /* shut down all video dma transfers */ 526 saa7146_write(dev, MC1, 0x00ff0000); 527 528 /* disable all irqs, release irq-routine */ 529 saa7146_write(dev, IER, 0); 530 531 free_irq(pdev->irq, dev); 532 533 for (p = dev_map; p->addr; p++) 534 pci_free_consistent(pdev, SAA7146_RPS_MEM, p->addr, p->dma); 535 536 iounmap(dev->mem); 537 pci_release_region(pdev, 0); 538 pci_disable_device(pdev); 539 kfree(dev); 540 541 saa7146_num--; 542 } 543 544 /*********************************************************************************/ 545 /* extension handling functions */ 546 547 int saa7146_register_extension(struct saa7146_extension* ext) 548 { 549 DEB_EE("ext:%p\n", ext); 550 551 ext->driver.name = ext->name; 552 ext->driver.id_table = ext->pci_tbl; 553 ext->driver.probe = saa7146_init_one; 554 ext->driver.remove = saa7146_remove_one; 555 556 pr_info("register extension '%s'\n", ext->name); 557 return pci_register_driver(&ext->driver); 558 } 559 560 int saa7146_unregister_extension(struct saa7146_extension* ext) 561 { 562 DEB_EE("ext:%p\n", ext); 563 pr_info("unregister extension '%s'\n", ext->name); 564 pci_unregister_driver(&ext->driver); 565 return 0; 566 } 567 568 EXPORT_SYMBOL_GPL(saa7146_register_extension); 569 EXPORT_SYMBOL_GPL(saa7146_unregister_extension); 570 571 /* misc functions used by extension modules */ 572 EXPORT_SYMBOL_GPL(saa7146_pgtable_alloc); 573 EXPORT_SYMBOL_GPL(saa7146_pgtable_free); 574 EXPORT_SYMBOL_GPL(saa7146_pgtable_build_single); 575 EXPORT_SYMBOL_GPL(saa7146_vmalloc_build_pgtable); 576 EXPORT_SYMBOL_GPL(saa7146_vfree_destroy_pgtable); 577 EXPORT_SYMBOL_GPL(saa7146_wait_for_debi_done); 578 579 EXPORT_SYMBOL_GPL(saa7146_setgpio); 580 581 EXPORT_SYMBOL_GPL(saa7146_i2c_adapter_prepare); 582 583 EXPORT_SYMBOL_GPL(saa7146_debug); 584 585 MODULE_AUTHOR("Michael Hunold <michael@mihu.de>"); 586 MODULE_DESCRIPTION("driver for generic saa7146-based hardware"); 587 MODULE_LICENSE("GPL"); 588