xref: /linux/drivers/leds/leds-pca963x.c (revision f3a8b6645dc2e60d11f20c1c23afd964ff4e55ae)
1 /*
2  * Copyright 2011 bct electronic GmbH
3  * Copyright 2013 Qtechnology/AS
4  *
5  * Author: Peter Meerwald <p.meerwald@bct-electronic.com>
6  * Author: Ricardo Ribalda <ricardo.ribalda@gmail.com>
7  *
8  * Based on leds-pca955x.c
9  *
10  * This file is subject to the terms and conditions of version 2 of
11  * the GNU General Public License.  See the file COPYING in the main
12  * directory of this archive for more details.
13  *
14  * LED driver for the PCA9633 I2C LED driver (7-bit slave address 0x62)
15  * LED driver for the PCA9634/5 I2C LED driver (7-bit slave address set by hw.)
16  *
17  * Note that hardware blinking violates the leds infrastructure driver
18  * interface since the hardware only supports blinking all LEDs with the
19  * same delay_on/delay_off rates.  That is, only the LEDs that are set to
20  * blink will actually blink but all LEDs that are set to blink will blink
21  * in identical fashion.  The delay_on/delay_off values of the last LED
22  * that is set to blink will be used for all of the blinking LEDs.
23  * Hardware blinking is disabled by default but can be enabled by setting
24  * the 'blink_type' member in the platform_data struct to 'PCA963X_HW_BLINK'
25  * or by adding the 'nxp,hw-blink' property to the DTS.
26  */
27 
28 #include <linux/module.h>
29 #include <linux/delay.h>
30 #include <linux/string.h>
31 #include <linux/ctype.h>
32 #include <linux/leds.h>
33 #include <linux/err.h>
34 #include <linux/i2c.h>
35 #include <linux/slab.h>
36 #include <linux/of.h>
37 #include <linux/platform_data/leds-pca963x.h>
38 
39 /* LED select registers determine the source that drives LED outputs */
40 #define PCA963X_LED_OFF		0x0	/* LED driver off */
41 #define PCA963X_LED_ON		0x1	/* LED driver on */
42 #define PCA963X_LED_PWM		0x2	/* Controlled through PWM */
43 #define PCA963X_LED_GRP_PWM	0x3	/* Controlled through PWM/GRPPWM */
44 
45 #define PCA963X_MODE2_DMBLNK	0x20	/* Enable blinking */
46 
47 #define PCA963X_MODE1		0x00
48 #define PCA963X_MODE2		0x01
49 #define PCA963X_PWM_BASE	0x02
50 
51 enum pca963x_type {
52 	pca9633,
53 	pca9634,
54 	pca9635,
55 };
56 
57 struct pca963x_chipdef {
58 	u8			grppwm;
59 	u8			grpfreq;
60 	u8			ledout_base;
61 	int			n_leds;
62 };
63 
64 static struct pca963x_chipdef pca963x_chipdefs[] = {
65 	[pca9633] = {
66 		.grppwm		= 0x6,
67 		.grpfreq	= 0x7,
68 		.ledout_base	= 0x8,
69 		.n_leds		= 4,
70 	},
71 	[pca9634] = {
72 		.grppwm		= 0xa,
73 		.grpfreq	= 0xb,
74 		.ledout_base	= 0xc,
75 		.n_leds		= 8,
76 	},
77 	[pca9635] = {
78 		.grppwm		= 0x12,
79 		.grpfreq	= 0x13,
80 		.ledout_base	= 0x14,
81 		.n_leds		= 16,
82 	},
83 };
84 
85 /* Total blink period in milliseconds */
86 #define PCA963X_BLINK_PERIOD_MIN	42
87 #define PCA963X_BLINK_PERIOD_MAX	10667
88 
89 static const struct i2c_device_id pca963x_id[] = {
90 	{ "pca9632", pca9633 },
91 	{ "pca9633", pca9633 },
92 	{ "pca9634", pca9634 },
93 	{ "pca9635", pca9635 },
94 	{ }
95 };
96 MODULE_DEVICE_TABLE(i2c, pca963x_id);
97 
98 struct pca963x_led;
99 
100 struct pca963x {
101 	struct pca963x_chipdef *chipdef;
102 	struct mutex mutex;
103 	struct i2c_client *client;
104 	struct pca963x_led *leds;
105 };
106 
107 struct pca963x_led {
108 	struct pca963x *chip;
109 	struct led_classdev led_cdev;
110 	int led_num; /* 0 .. 15 potentially */
111 	char name[32];
112 	u8 gdc;
113 	u8 gfrq;
114 };
115 
116 static int pca963x_brightness(struct pca963x_led *pca963x,
117 			       enum led_brightness brightness)
118 {
119 	u8 ledout_addr = pca963x->chip->chipdef->ledout_base
120 		+ (pca963x->led_num / 4);
121 	u8 ledout;
122 	int shift = 2 * (pca963x->led_num % 4);
123 	u8 mask = 0x3 << shift;
124 	int ret;
125 
126 	mutex_lock(&pca963x->chip->mutex);
127 	ledout = i2c_smbus_read_byte_data(pca963x->chip->client, ledout_addr);
128 	switch (brightness) {
129 	case LED_FULL:
130 		ret = i2c_smbus_write_byte_data(pca963x->chip->client,
131 			ledout_addr,
132 			(ledout & ~mask) | (PCA963X_LED_ON << shift));
133 		break;
134 	case LED_OFF:
135 		ret = i2c_smbus_write_byte_data(pca963x->chip->client,
136 			ledout_addr, ledout & ~mask);
137 		break;
138 	default:
139 		ret = i2c_smbus_write_byte_data(pca963x->chip->client,
140 			PCA963X_PWM_BASE + pca963x->led_num,
141 			brightness);
142 		if (ret < 0)
143 			goto unlock;
144 		ret = i2c_smbus_write_byte_data(pca963x->chip->client,
145 			ledout_addr,
146 			(ledout & ~mask) | (PCA963X_LED_PWM << shift));
147 		break;
148 	}
149 unlock:
150 	mutex_unlock(&pca963x->chip->mutex);
151 	return ret;
152 }
153 
154 static void pca963x_blink(struct pca963x_led *pca963x)
155 {
156 	u8 ledout_addr = pca963x->chip->chipdef->ledout_base +
157 		(pca963x->led_num / 4);
158 	u8 ledout;
159 	u8 mode2 = i2c_smbus_read_byte_data(pca963x->chip->client,
160 							PCA963X_MODE2);
161 	int shift = 2 * (pca963x->led_num % 4);
162 	u8 mask = 0x3 << shift;
163 
164 	i2c_smbus_write_byte_data(pca963x->chip->client,
165 			pca963x->chip->chipdef->grppwm,	pca963x->gdc);
166 
167 	i2c_smbus_write_byte_data(pca963x->chip->client,
168 			pca963x->chip->chipdef->grpfreq, pca963x->gfrq);
169 
170 	if (!(mode2 & PCA963X_MODE2_DMBLNK))
171 		i2c_smbus_write_byte_data(pca963x->chip->client, PCA963X_MODE2,
172 			mode2 | PCA963X_MODE2_DMBLNK);
173 
174 	mutex_lock(&pca963x->chip->mutex);
175 	ledout = i2c_smbus_read_byte_data(pca963x->chip->client, ledout_addr);
176 	if ((ledout & mask) != (PCA963X_LED_GRP_PWM << shift))
177 		i2c_smbus_write_byte_data(pca963x->chip->client, ledout_addr,
178 			(ledout & ~mask) | (PCA963X_LED_GRP_PWM << shift));
179 	mutex_unlock(&pca963x->chip->mutex);
180 }
181 
182 static int pca963x_led_set(struct led_classdev *led_cdev,
183 	enum led_brightness value)
184 {
185 	struct pca963x_led *pca963x;
186 
187 	pca963x = container_of(led_cdev, struct pca963x_led, led_cdev);
188 
189 	return pca963x_brightness(pca963x, value);
190 }
191 
192 static int pca963x_blink_set(struct led_classdev *led_cdev,
193 		unsigned long *delay_on, unsigned long *delay_off)
194 {
195 	struct pca963x_led *pca963x;
196 	unsigned long time_on, time_off, period;
197 	u8 gdc, gfrq;
198 
199 	pca963x = container_of(led_cdev, struct pca963x_led, led_cdev);
200 
201 	time_on = *delay_on;
202 	time_off = *delay_off;
203 
204 	/* If both zero, pick reasonable defaults of 500ms each */
205 	if (!time_on && !time_off) {
206 		time_on = 500;
207 		time_off = 500;
208 	}
209 
210 	period = time_on + time_off;
211 
212 	/* If period not supported by hardware, default to someting sane. */
213 	if ((period < PCA963X_BLINK_PERIOD_MIN) ||
214 	    (period > PCA963X_BLINK_PERIOD_MAX)) {
215 		time_on = 500;
216 		time_off = 500;
217 		period = time_on + time_off;
218 	}
219 
220 	/*
221 	 * From manual: duty cycle = (GDC / 256) ->
222 	 *	(time_on / period) = (GDC / 256) ->
223 	 *		GDC = ((time_on * 256) / period)
224 	 */
225 	gdc = (time_on * 256) / period;
226 
227 	/*
228 	 * From manual: period = ((GFRQ + 1) / 24) in seconds.
229 	 * So, period (in ms) = (((GFRQ + 1) / 24) * 1000) ->
230 	 *		GFRQ = ((period * 24 / 1000) - 1)
231 	 */
232 	gfrq = (period * 24 / 1000) - 1;
233 
234 	pca963x->gdc = gdc;
235 	pca963x->gfrq = gfrq;
236 
237 	pca963x_blink(pca963x);
238 
239 	*delay_on = time_on;
240 	*delay_off = time_off;
241 
242 	return 0;
243 }
244 
245 #if IS_ENABLED(CONFIG_OF)
246 static struct pca963x_platform_data *
247 pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip)
248 {
249 	struct device_node *np = client->dev.of_node, *child;
250 	struct pca963x_platform_data *pdata;
251 	struct led_info *pca963x_leds;
252 	int count;
253 
254 	count = of_get_child_count(np);
255 	if (!count || count > chip->n_leds)
256 		return ERR_PTR(-ENODEV);
257 
258 	pca963x_leds = devm_kzalloc(&client->dev,
259 			sizeof(struct led_info) * chip->n_leds, GFP_KERNEL);
260 	if (!pca963x_leds)
261 		return ERR_PTR(-ENOMEM);
262 
263 	for_each_child_of_node(np, child) {
264 		struct led_info led = {};
265 		u32 reg;
266 		int res;
267 
268 		res = of_property_read_u32(child, "reg", &reg);
269 		if ((res != 0) || (reg >= chip->n_leds))
270 			continue;
271 		led.name =
272 			of_get_property(child, "label", NULL) ? : child->name;
273 		led.default_trigger =
274 			of_get_property(child, "linux,default-trigger", NULL);
275 		pca963x_leds[reg] = led;
276 	}
277 	pdata = devm_kzalloc(&client->dev,
278 			     sizeof(struct pca963x_platform_data), GFP_KERNEL);
279 	if (!pdata)
280 		return ERR_PTR(-ENOMEM);
281 
282 	pdata->leds.leds = pca963x_leds;
283 	pdata->leds.num_leds = chip->n_leds;
284 
285 	/* default to open-drain unless totem pole (push-pull) is specified */
286 	if (of_property_read_bool(np, "nxp,totem-pole"))
287 		pdata->outdrv = PCA963X_TOTEM_POLE;
288 	else
289 		pdata->outdrv = PCA963X_OPEN_DRAIN;
290 
291 	/* default to software blinking unless hardware blinking is specified */
292 	if (of_property_read_bool(np, "nxp,hw-blink"))
293 		pdata->blink_type = PCA963X_HW_BLINK;
294 	else
295 		pdata->blink_type = PCA963X_SW_BLINK;
296 
297 	return pdata;
298 }
299 
300 static const struct of_device_id of_pca963x_match[] = {
301 	{ .compatible = "nxp,pca9632", },
302 	{ .compatible = "nxp,pca9633", },
303 	{ .compatible = "nxp,pca9634", },
304 	{ .compatible = "nxp,pca9635", },
305 	{},
306 };
307 MODULE_DEVICE_TABLE(of, of_pca963x_match);
308 #else
309 static struct pca963x_platform_data *
310 pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip)
311 {
312 	return ERR_PTR(-ENODEV);
313 }
314 #endif
315 
316 static int pca963x_probe(struct i2c_client *client,
317 					const struct i2c_device_id *id)
318 {
319 	struct pca963x *pca963x_chip;
320 	struct pca963x_led *pca963x;
321 	struct pca963x_platform_data *pdata;
322 	struct pca963x_chipdef *chip;
323 	int i, err;
324 
325 	chip = &pca963x_chipdefs[id->driver_data];
326 	pdata = dev_get_platdata(&client->dev);
327 
328 	if (!pdata) {
329 		pdata = pca963x_dt_init(client, chip);
330 		if (IS_ERR(pdata)) {
331 			dev_warn(&client->dev, "could not parse configuration\n");
332 			pdata = NULL;
333 		}
334 	}
335 
336 	if (pdata && (pdata->leds.num_leds < 1 ||
337 				 pdata->leds.num_leds > chip->n_leds)) {
338 		dev_err(&client->dev, "board info must claim 1-%d LEDs",
339 								chip->n_leds);
340 		return -EINVAL;
341 	}
342 
343 	pca963x_chip = devm_kzalloc(&client->dev, sizeof(*pca963x_chip),
344 								GFP_KERNEL);
345 	if (!pca963x_chip)
346 		return -ENOMEM;
347 	pca963x = devm_kzalloc(&client->dev, chip->n_leds * sizeof(*pca963x),
348 								GFP_KERNEL);
349 	if (!pca963x)
350 		return -ENOMEM;
351 
352 	i2c_set_clientdata(client, pca963x_chip);
353 
354 	mutex_init(&pca963x_chip->mutex);
355 	pca963x_chip->chipdef = chip;
356 	pca963x_chip->client = client;
357 	pca963x_chip->leds = pca963x;
358 
359 	/* Turn off LEDs by default*/
360 	for (i = 0; i < chip->n_leds / 4; i++)
361 		i2c_smbus_write_byte_data(client, chip->ledout_base + i, 0x00);
362 
363 	for (i = 0; i < chip->n_leds; i++) {
364 		pca963x[i].led_num = i;
365 		pca963x[i].chip = pca963x_chip;
366 
367 		/* Platform data can specify LED names and default triggers */
368 		if (pdata && i < pdata->leds.num_leds) {
369 			if (pdata->leds.leds[i].name)
370 				snprintf(pca963x[i].name,
371 					 sizeof(pca963x[i].name), "pca963x:%s",
372 					 pdata->leds.leds[i].name);
373 			if (pdata->leds.leds[i].default_trigger)
374 				pca963x[i].led_cdev.default_trigger =
375 					pdata->leds.leds[i].default_trigger;
376 		}
377 		if (!pdata || i >= pdata->leds.num_leds ||
378 						!pdata->leds.leds[i].name)
379 			snprintf(pca963x[i].name, sizeof(pca963x[i].name),
380 				 "pca963x:%d:%.2x:%d", client->adapter->nr,
381 				 client->addr, i);
382 
383 		pca963x[i].led_cdev.name = pca963x[i].name;
384 		pca963x[i].led_cdev.brightness_set_blocking = pca963x_led_set;
385 
386 		if (pdata && pdata->blink_type == PCA963X_HW_BLINK)
387 			pca963x[i].led_cdev.blink_set = pca963x_blink_set;
388 
389 		err = led_classdev_register(&client->dev, &pca963x[i].led_cdev);
390 		if (err < 0)
391 			goto exit;
392 	}
393 
394 	/* Disable LED all-call address and set normal mode */
395 	i2c_smbus_write_byte_data(client, PCA963X_MODE1, 0x00);
396 
397 	if (pdata) {
398 		/* Configure output: open-drain or totem pole (push-pull) */
399 		if (pdata->outdrv == PCA963X_OPEN_DRAIN)
400 			i2c_smbus_write_byte_data(client, PCA963X_MODE2, 0x01);
401 		else
402 			i2c_smbus_write_byte_data(client, PCA963X_MODE2, 0x05);
403 	}
404 
405 	return 0;
406 
407 exit:
408 	while (i--)
409 		led_classdev_unregister(&pca963x[i].led_cdev);
410 
411 	return err;
412 }
413 
414 static int pca963x_remove(struct i2c_client *client)
415 {
416 	struct pca963x *pca963x = i2c_get_clientdata(client);
417 	int i;
418 
419 	for (i = 0; i < pca963x->chipdef->n_leds; i++)
420 		led_classdev_unregister(&pca963x->leds[i].led_cdev);
421 
422 	return 0;
423 }
424 
425 static struct i2c_driver pca963x_driver = {
426 	.driver = {
427 		.name	= "leds-pca963x",
428 		.of_match_table = of_match_ptr(of_pca963x_match),
429 	},
430 	.probe	= pca963x_probe,
431 	.remove	= pca963x_remove,
432 	.id_table = pca963x_id,
433 };
434 
435 module_i2c_driver(pca963x_driver);
436 
437 MODULE_AUTHOR("Peter Meerwald <p.meerwald@bct-electronic.com>");
438 MODULE_DESCRIPTION("PCA963X LED driver");
439 MODULE_LICENSE("GPL v2");
440