1 /* 2 * leds-blinkm.c 3 * (c) Jan-Simon Möller (dl9pf@gmx.de) 4 * 5 * This program is free software; you can redistribute it and/or modify 6 * it under the terms of the GNU General Public License as published by 7 * the Free Software Foundation; either version 2 of the License, or 8 * (at your option) any later version. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software 17 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 18 */ 19 20 #include <linux/module.h> 21 #include <linux/slab.h> 22 #include <linux/jiffies.h> 23 #include <linux/i2c.h> 24 #include <linux/err.h> 25 #include <linux/mutex.h> 26 #include <linux/sysfs.h> 27 #include <linux/printk.h> 28 #include <linux/pm_runtime.h> 29 #include <linux/leds.h> 30 #include <linux/delay.h> 31 32 /* Addresses to scan - BlinkM is on 0x09 by default*/ 33 static const unsigned short normal_i2c[] = { 0x09, I2C_CLIENT_END }; 34 35 static int blinkm_transfer_hw(struct i2c_client *client, int cmd); 36 static int blinkm_test_run(struct i2c_client *client); 37 38 struct blinkm_led { 39 struct i2c_client *i2c_client; 40 struct led_classdev led_cdev; 41 int id; 42 }; 43 44 #define cdev_to_blmled(c) container_of(c, struct blinkm_led, led_cdev) 45 46 struct blinkm_data { 47 struct i2c_client *i2c_client; 48 struct mutex update_lock; 49 /* used for led class interface */ 50 struct blinkm_led blinkm_leds[3]; 51 /* used for "blinkm" sysfs interface */ 52 u8 red; /* color red */ 53 u8 green; /* color green */ 54 u8 blue; /* color blue */ 55 /* next values to use for transfer */ 56 u8 next_red; /* color red */ 57 u8 next_green; /* color green */ 58 u8 next_blue; /* color blue */ 59 /* internal use */ 60 u8 args[7]; /* set of args for transmission */ 61 u8 i2c_addr; /* i2c addr */ 62 u8 fw_ver; /* firmware version */ 63 /* used, but not from userspace */ 64 u8 hue; /* HSB hue */ 65 u8 saturation; /* HSB saturation */ 66 u8 brightness; /* HSB brightness */ 67 u8 next_hue; /* HSB hue */ 68 u8 next_saturation; /* HSB saturation */ 69 u8 next_brightness; /* HSB brightness */ 70 /* currently unused / todo */ 71 u8 fade_speed; /* fade speed 1 - 255 */ 72 s8 time_adjust; /* time adjust -128 - 127 */ 73 u8 fade:1; /* fade on = 1, off = 0 */ 74 u8 rand:1; /* rand fade mode on = 1 */ 75 u8 script_id; /* script ID */ 76 u8 script_repeats; /* repeats of script */ 77 u8 script_startline; /* line to start */ 78 }; 79 80 /* Colors */ 81 #define RED 0 82 #define GREEN 1 83 #define BLUE 2 84 85 /* mapping command names to cmd chars - see datasheet */ 86 #define BLM_GO_RGB 0 87 #define BLM_FADE_RGB 1 88 #define BLM_FADE_HSB 2 89 #define BLM_FADE_RAND_RGB 3 90 #define BLM_FADE_RAND_HSB 4 91 #define BLM_PLAY_SCRIPT 5 92 #define BLM_STOP_SCRIPT 6 93 #define BLM_SET_FADE_SPEED 7 94 #define BLM_SET_TIME_ADJ 8 95 #define BLM_GET_CUR_RGB 9 96 #define BLM_WRITE_SCRIPT_LINE 10 97 #define BLM_READ_SCRIPT_LINE 11 98 #define BLM_SET_SCRIPT_LR 12 /* Length & Repeats */ 99 #define BLM_SET_ADDR 13 100 #define BLM_GET_ADDR 14 101 #define BLM_GET_FW_VER 15 102 #define BLM_SET_STARTUP_PARAM 16 103 104 /* BlinkM Commands 105 * as extracted out of the datasheet: 106 * 107 * cmdchar = command (ascii) 108 * cmdbyte = command in hex 109 * nr_args = number of arguments (to send) 110 * nr_ret = number of return values (to read) 111 * dir = direction (0 = read, 1 = write, 2 = both) 112 * 113 */ 114 static const struct { 115 char cmdchar; 116 u8 cmdbyte; 117 u8 nr_args; 118 u8 nr_ret; 119 u8 dir:2; 120 } blinkm_cmds[17] = { 121 /* cmdchar, cmdbyte, nr_args, nr_ret, dir */ 122 { 'n', 0x6e, 3, 0, 1}, 123 { 'c', 0x63, 3, 0, 1}, 124 { 'h', 0x68, 3, 0, 1}, 125 { 'C', 0x43, 3, 0, 1}, 126 { 'H', 0x48, 3, 0, 1}, 127 { 'p', 0x70, 3, 0, 1}, 128 { 'o', 0x6f, 0, 0, 1}, 129 { 'f', 0x66, 1, 0, 1}, 130 { 't', 0x74, 1, 0, 1}, 131 { 'g', 0x67, 0, 3, 0}, 132 { 'W', 0x57, 7, 0, 1}, 133 { 'R', 0x52, 2, 5, 2}, 134 { 'L', 0x4c, 3, 0, 1}, 135 { 'A', 0x41, 4, 0, 1}, 136 { 'a', 0x61, 0, 1, 0}, 137 { 'Z', 0x5a, 0, 1, 0}, 138 { 'B', 0x42, 5, 0, 1}, 139 }; 140 141 static ssize_t show_color_common(struct device *dev, char *buf, int color) 142 { 143 struct i2c_client *client; 144 struct blinkm_data *data; 145 int ret; 146 147 client = to_i2c_client(dev); 148 data = i2c_get_clientdata(client); 149 150 ret = blinkm_transfer_hw(client, BLM_GET_CUR_RGB); 151 if (ret < 0) 152 return ret; 153 switch (color) { 154 case RED: 155 return scnprintf(buf, PAGE_SIZE, "%02X\n", data->red); 156 case GREEN: 157 return scnprintf(buf, PAGE_SIZE, "%02X\n", data->green); 158 case BLUE: 159 return scnprintf(buf, PAGE_SIZE, "%02X\n", data->blue); 160 default: 161 return -EINVAL; 162 } 163 return -EINVAL; 164 } 165 166 static int store_color_common(struct device *dev, const char *buf, int color) 167 { 168 struct i2c_client *client; 169 struct blinkm_data *data; 170 int ret; 171 u8 value; 172 173 client = to_i2c_client(dev); 174 data = i2c_get_clientdata(client); 175 176 ret = kstrtou8(buf, 10, &value); 177 if (ret < 0) { 178 dev_err(dev, "BlinkM: value too large!\n"); 179 return ret; 180 } 181 182 switch (color) { 183 case RED: 184 data->next_red = value; 185 break; 186 case GREEN: 187 data->next_green = value; 188 break; 189 case BLUE: 190 data->next_blue = value; 191 break; 192 default: 193 return -EINVAL; 194 } 195 196 dev_dbg(dev, "next_red = %d, next_green = %d, next_blue = %d\n", 197 data->next_red, data->next_green, data->next_blue); 198 199 /* if mode ... */ 200 ret = blinkm_transfer_hw(client, BLM_GO_RGB); 201 if (ret < 0) { 202 dev_err(dev, "BlinkM: can't set RGB\n"); 203 return ret; 204 } 205 return 0; 206 } 207 208 static ssize_t show_red(struct device *dev, struct device_attribute *attr, 209 char *buf) 210 { 211 return show_color_common(dev, buf, RED); 212 } 213 214 static ssize_t store_red(struct device *dev, struct device_attribute *attr, 215 const char *buf, size_t count) 216 { 217 int ret; 218 219 ret = store_color_common(dev, buf, RED); 220 if (ret < 0) 221 return ret; 222 return count; 223 } 224 225 static DEVICE_ATTR(red, S_IRUGO | S_IWUSR, show_red, store_red); 226 227 static ssize_t show_green(struct device *dev, struct device_attribute *attr, 228 char *buf) 229 { 230 return show_color_common(dev, buf, GREEN); 231 } 232 233 static ssize_t store_green(struct device *dev, struct device_attribute *attr, 234 const char *buf, size_t count) 235 { 236 237 int ret; 238 239 ret = store_color_common(dev, buf, GREEN); 240 if (ret < 0) 241 return ret; 242 return count; 243 } 244 245 static DEVICE_ATTR(green, S_IRUGO | S_IWUSR, show_green, store_green); 246 247 static ssize_t show_blue(struct device *dev, struct device_attribute *attr, 248 char *buf) 249 { 250 return show_color_common(dev, buf, BLUE); 251 } 252 253 static ssize_t store_blue(struct device *dev, struct device_attribute *attr, 254 const char *buf, size_t count) 255 { 256 int ret; 257 258 ret = store_color_common(dev, buf, BLUE); 259 if (ret < 0) 260 return ret; 261 return count; 262 } 263 264 static DEVICE_ATTR(blue, S_IRUGO | S_IWUSR, show_blue, store_blue); 265 266 static ssize_t show_test(struct device *dev, struct device_attribute *attr, 267 char *buf) 268 { 269 return scnprintf(buf, PAGE_SIZE, 270 "#Write into test to start test sequence!#\n"); 271 } 272 273 static ssize_t store_test(struct device *dev, struct device_attribute *attr, 274 const char *buf, size_t count) 275 { 276 277 struct i2c_client *client; 278 int ret; 279 client = to_i2c_client(dev); 280 281 /*test */ 282 ret = blinkm_test_run(client); 283 if (ret < 0) 284 return ret; 285 286 return count; 287 } 288 289 static DEVICE_ATTR(test, S_IRUGO | S_IWUSR, show_test, store_test); 290 291 /* TODO: HSB, fade, timeadj, script ... */ 292 293 static struct attribute *blinkm_attrs[] = { 294 &dev_attr_red.attr, 295 &dev_attr_green.attr, 296 &dev_attr_blue.attr, 297 &dev_attr_test.attr, 298 NULL, 299 }; 300 301 static struct attribute_group blinkm_group = { 302 .name = "blinkm", 303 .attrs = blinkm_attrs, 304 }; 305 306 static int blinkm_write(struct i2c_client *client, int cmd, u8 *arg) 307 { 308 int result; 309 int i; 310 int arglen = blinkm_cmds[cmd].nr_args; 311 /* write out cmd to blinkm - always / default step */ 312 result = i2c_smbus_write_byte(client, blinkm_cmds[cmd].cmdbyte); 313 if (result < 0) 314 return result; 315 /* no args to write out */ 316 if (arglen == 0) 317 return 0; 318 319 for (i = 0; i < arglen; i++) { 320 /* repeat for arglen */ 321 result = i2c_smbus_write_byte(client, arg[i]); 322 if (result < 0) 323 return result; 324 } 325 return 0; 326 } 327 328 static int blinkm_read(struct i2c_client *client, int cmd, u8 *arg) 329 { 330 int result; 331 int i; 332 int retlen = blinkm_cmds[cmd].nr_ret; 333 for (i = 0; i < retlen; i++) { 334 /* repeat for retlen */ 335 result = i2c_smbus_read_byte(client); 336 if (result < 0) 337 return result; 338 arg[i] = result; 339 } 340 341 return 0; 342 } 343 344 static int blinkm_transfer_hw(struct i2c_client *client, int cmd) 345 { 346 /* the protocol is simple but non-standard: 347 * e.g. cmd 'g' (= 0x67) for "get device address" 348 * - which defaults to 0x09 - would be the sequence: 349 * a) write 0x67 to the device (byte write) 350 * b) read the value (0x09) back right after (byte read) 351 * 352 * Watch out for "unfinished" sequences (i.e. not enough reads 353 * or writes after a command. It will make the blinkM misbehave. 354 * Sequence is key here. 355 */ 356 357 /* args / return are in private data struct */ 358 struct blinkm_data *data = i2c_get_clientdata(client); 359 360 /* We start hardware transfers which are not to be 361 * mixed with other commands. Aquire a lock now. */ 362 if (mutex_lock_interruptible(&data->update_lock) < 0) 363 return -EAGAIN; 364 365 /* switch cmd - usually write before reads */ 366 switch (cmd) { 367 case BLM_FADE_RAND_RGB: 368 case BLM_GO_RGB: 369 case BLM_FADE_RGB: 370 data->args[0] = data->next_red; 371 data->args[1] = data->next_green; 372 data->args[2] = data->next_blue; 373 blinkm_write(client, cmd, data->args); 374 data->red = data->args[0]; 375 data->green = data->args[1]; 376 data->blue = data->args[2]; 377 break; 378 case BLM_FADE_HSB: 379 case BLM_FADE_RAND_HSB: 380 data->args[0] = data->next_hue; 381 data->args[1] = data->next_saturation; 382 data->args[2] = data->next_brightness; 383 blinkm_write(client, cmd, data->args); 384 data->hue = data->next_hue; 385 data->saturation = data->next_saturation; 386 data->brightness = data->next_brightness; 387 break; 388 case BLM_PLAY_SCRIPT: 389 data->args[0] = data->script_id; 390 data->args[1] = data->script_repeats; 391 data->args[2] = data->script_startline; 392 blinkm_write(client, cmd, data->args); 393 break; 394 case BLM_STOP_SCRIPT: 395 blinkm_write(client, cmd, NULL); 396 break; 397 case BLM_GET_CUR_RGB: 398 data->args[0] = data->red; 399 data->args[1] = data->green; 400 data->args[2] = data->blue; 401 blinkm_write(client, cmd, NULL); 402 blinkm_read(client, cmd, data->args); 403 data->red = data->args[0]; 404 data->green = data->args[1]; 405 data->blue = data->args[2]; 406 break; 407 case BLM_GET_ADDR: 408 data->args[0] = data->i2c_addr; 409 blinkm_write(client, cmd, NULL); 410 blinkm_read(client, cmd, data->args); 411 data->i2c_addr = data->args[0]; 412 break; 413 case BLM_SET_TIME_ADJ: 414 case BLM_SET_FADE_SPEED: 415 case BLM_READ_SCRIPT_LINE: 416 case BLM_WRITE_SCRIPT_LINE: 417 case BLM_SET_SCRIPT_LR: 418 case BLM_SET_ADDR: 419 case BLM_GET_FW_VER: 420 case BLM_SET_STARTUP_PARAM: 421 dev_err(&client->dev, 422 "BlinkM: cmd %d not implemented yet.\n", cmd); 423 break; 424 default: 425 dev_err(&client->dev, "BlinkM: unknown command %d\n", cmd); 426 mutex_unlock(&data->update_lock); 427 return -EINVAL; 428 } /* end switch(cmd) */ 429 430 /* transfers done, unlock */ 431 mutex_unlock(&data->update_lock); 432 return 0; 433 } 434 435 static int blinkm_led_common_set(struct led_classdev *led_cdev, 436 enum led_brightness value, int color) 437 { 438 /* led_brightness is 0, 127 or 255 - we just use it here as-is */ 439 struct blinkm_led *led = cdev_to_blmled(led_cdev); 440 struct blinkm_data *data = i2c_get_clientdata(led->i2c_client); 441 442 switch (color) { 443 case RED: 444 /* bail out if there's no change */ 445 if (data->next_red == (u8) value) 446 return 0; 447 data->next_red = (u8) value; 448 break; 449 case GREEN: 450 /* bail out if there's no change */ 451 if (data->next_green == (u8) value) 452 return 0; 453 data->next_green = (u8) value; 454 break; 455 case BLUE: 456 /* bail out if there's no change */ 457 if (data->next_blue == (u8) value) 458 return 0; 459 data->next_blue = (u8) value; 460 break; 461 462 default: 463 dev_err(&led->i2c_client->dev, "BlinkM: unknown color.\n"); 464 return -EINVAL; 465 } 466 467 blinkm_transfer_hw(led->i2c_client, BLM_GO_RGB); 468 dev_dbg(&led->i2c_client->dev, 469 "# DONE # next_red = %d, next_green = %d," 470 " next_blue = %d\n", 471 data->next_red, data->next_green, 472 data->next_blue); 473 return 0; 474 } 475 476 static int blinkm_led_red_set(struct led_classdev *led_cdev, 477 enum led_brightness value) 478 { 479 return blinkm_led_common_set(led_cdev, value, RED); 480 } 481 482 static int blinkm_led_green_set(struct led_classdev *led_cdev, 483 enum led_brightness value) 484 { 485 return blinkm_led_common_set(led_cdev, value, GREEN); 486 } 487 488 static int blinkm_led_blue_set(struct led_classdev *led_cdev, 489 enum led_brightness value) 490 { 491 return blinkm_led_common_set(led_cdev, value, BLUE); 492 } 493 494 static void blinkm_init_hw(struct i2c_client *client) 495 { 496 int ret; 497 ret = blinkm_transfer_hw(client, BLM_STOP_SCRIPT); 498 ret = blinkm_transfer_hw(client, BLM_GO_RGB); 499 } 500 501 static int blinkm_test_run(struct i2c_client *client) 502 { 503 int ret; 504 struct blinkm_data *data = i2c_get_clientdata(client); 505 506 data->next_red = 0x01; 507 data->next_green = 0x05; 508 data->next_blue = 0x10; 509 ret = blinkm_transfer_hw(client, BLM_GO_RGB); 510 if (ret < 0) 511 return ret; 512 msleep(2000); 513 514 data->next_red = 0x25; 515 data->next_green = 0x10; 516 data->next_blue = 0x31; 517 ret = blinkm_transfer_hw(client, BLM_FADE_RGB); 518 if (ret < 0) 519 return ret; 520 msleep(2000); 521 522 data->next_hue = 0x50; 523 data->next_saturation = 0x10; 524 data->next_brightness = 0x20; 525 ret = blinkm_transfer_hw(client, BLM_FADE_HSB); 526 if (ret < 0) 527 return ret; 528 msleep(2000); 529 530 return 0; 531 } 532 533 /* Return 0 if detection is successful, -ENODEV otherwise */ 534 static int blinkm_detect(struct i2c_client *client, struct i2c_board_info *info) 535 { 536 struct i2c_adapter *adapter = client->adapter; 537 int ret; 538 int count = 99; 539 u8 tmpargs[7]; 540 541 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA 542 | I2C_FUNC_SMBUS_WORD_DATA 543 | I2C_FUNC_SMBUS_WRITE_BYTE)) 544 return -ENODEV; 545 546 /* Now, we do the remaining detection. Simple for now. */ 547 /* We might need more guards to protect other i2c slaves */ 548 549 /* make sure the blinkM is balanced (read/writes) */ 550 while (count > 0) { 551 ret = blinkm_write(client, BLM_GET_ADDR, NULL); 552 usleep_range(5000, 10000); 553 ret = blinkm_read(client, BLM_GET_ADDR, tmpargs); 554 usleep_range(5000, 10000); 555 if (tmpargs[0] == 0x09) 556 count = 0; 557 count--; 558 } 559 560 /* Step 1: Read BlinkM address back - cmd_char 'a' */ 561 ret = blinkm_write(client, BLM_GET_ADDR, NULL); 562 if (ret < 0) 563 return ret; 564 usleep_range(20000, 30000); /* allow a small delay */ 565 ret = blinkm_read(client, BLM_GET_ADDR, tmpargs); 566 if (ret < 0) 567 return ret; 568 569 if (tmpargs[0] != 0x09) { 570 dev_err(&client->dev, "enodev DEV ADDR = 0x%02X\n", tmpargs[0]); 571 return -ENODEV; 572 } 573 574 strlcpy(info->type, "blinkm", I2C_NAME_SIZE); 575 return 0; 576 } 577 578 static int blinkm_probe(struct i2c_client *client, 579 const struct i2c_device_id *id) 580 { 581 struct blinkm_data *data; 582 struct blinkm_led *led[3]; 583 int err, i; 584 char blinkm_led_name[28]; 585 586 data = devm_kzalloc(&client->dev, 587 sizeof(struct blinkm_data), GFP_KERNEL); 588 if (!data) { 589 err = -ENOMEM; 590 goto exit; 591 } 592 593 data->i2c_addr = 0x09; 594 data->i2c_addr = 0x08; 595 /* i2c addr - use fake addr of 0x08 initially (real is 0x09) */ 596 data->fw_ver = 0xfe; 597 /* firmware version - use fake until we read real value 598 * (currently broken - BlinkM confused!) */ 599 data->script_id = 0x01; 600 data->i2c_client = client; 601 602 i2c_set_clientdata(client, data); 603 mutex_init(&data->update_lock); 604 605 /* Register sysfs hooks */ 606 err = sysfs_create_group(&client->dev.kobj, &blinkm_group); 607 if (err < 0) { 608 dev_err(&client->dev, "couldn't register sysfs group\n"); 609 goto exit; 610 } 611 612 for (i = 0; i < 3; i++) { 613 /* RED = 0, GREEN = 1, BLUE = 2 */ 614 led[i] = &data->blinkm_leds[i]; 615 led[i]->i2c_client = client; 616 led[i]->id = i; 617 led[i]->led_cdev.max_brightness = 255; 618 led[i]->led_cdev.flags = LED_CORE_SUSPENDRESUME; 619 switch (i) { 620 case RED: 621 snprintf(blinkm_led_name, sizeof(blinkm_led_name), 622 "blinkm-%d-%d-red", 623 client->adapter->nr, 624 client->addr); 625 led[i]->led_cdev.name = blinkm_led_name; 626 led[i]->led_cdev.brightness_set_blocking = 627 blinkm_led_red_set; 628 err = led_classdev_register(&client->dev, 629 &led[i]->led_cdev); 630 if (err < 0) { 631 dev_err(&client->dev, 632 "couldn't register LED %s\n", 633 led[i]->led_cdev.name); 634 goto failred; 635 } 636 break; 637 case GREEN: 638 snprintf(blinkm_led_name, sizeof(blinkm_led_name), 639 "blinkm-%d-%d-green", 640 client->adapter->nr, 641 client->addr); 642 led[i]->led_cdev.name = blinkm_led_name; 643 led[i]->led_cdev.brightness_set_blocking = 644 blinkm_led_green_set; 645 err = led_classdev_register(&client->dev, 646 &led[i]->led_cdev); 647 if (err < 0) { 648 dev_err(&client->dev, 649 "couldn't register LED %s\n", 650 led[i]->led_cdev.name); 651 goto failgreen; 652 } 653 break; 654 case BLUE: 655 snprintf(blinkm_led_name, sizeof(blinkm_led_name), 656 "blinkm-%d-%d-blue", 657 client->adapter->nr, 658 client->addr); 659 led[i]->led_cdev.name = blinkm_led_name; 660 led[i]->led_cdev.brightness_set_blocking = 661 blinkm_led_blue_set; 662 err = led_classdev_register(&client->dev, 663 &led[i]->led_cdev); 664 if (err < 0) { 665 dev_err(&client->dev, 666 "couldn't register LED %s\n", 667 led[i]->led_cdev.name); 668 goto failblue; 669 } 670 break; 671 } /* end switch */ 672 } /* end for */ 673 674 /* Initialize the blinkm */ 675 blinkm_init_hw(client); 676 677 return 0; 678 679 failblue: 680 led_classdev_unregister(&led[GREEN]->led_cdev); 681 682 failgreen: 683 led_classdev_unregister(&led[RED]->led_cdev); 684 685 failred: 686 sysfs_remove_group(&client->dev.kobj, &blinkm_group); 687 exit: 688 return err; 689 } 690 691 static int blinkm_remove(struct i2c_client *client) 692 { 693 struct blinkm_data *data = i2c_get_clientdata(client); 694 int ret = 0; 695 int i; 696 697 /* make sure no workqueue entries are pending */ 698 for (i = 0; i < 3; i++) 699 led_classdev_unregister(&data->blinkm_leds[i].led_cdev); 700 701 /* reset rgb */ 702 data->next_red = 0x00; 703 data->next_green = 0x00; 704 data->next_blue = 0x00; 705 ret = blinkm_transfer_hw(client, BLM_FADE_RGB); 706 if (ret < 0) 707 dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n"); 708 709 /* reset hsb */ 710 data->next_hue = 0x00; 711 data->next_saturation = 0x00; 712 data->next_brightness = 0x00; 713 ret = blinkm_transfer_hw(client, BLM_FADE_HSB); 714 if (ret < 0) 715 dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n"); 716 717 /* red fade to off */ 718 data->next_red = 0xff; 719 ret = blinkm_transfer_hw(client, BLM_GO_RGB); 720 if (ret < 0) 721 dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n"); 722 723 /* off */ 724 data->next_red = 0x00; 725 ret = blinkm_transfer_hw(client, BLM_FADE_RGB); 726 if (ret < 0) 727 dev_err(&client->dev, "Failure in blinkm_remove ignored. Continuing.\n"); 728 729 sysfs_remove_group(&client->dev.kobj, &blinkm_group); 730 return 0; 731 } 732 733 static const struct i2c_device_id blinkm_id[] = { 734 {"blinkm", 0}, 735 {} 736 }; 737 738 MODULE_DEVICE_TABLE(i2c, blinkm_id); 739 740 /* This is the driver that will be inserted */ 741 static struct i2c_driver blinkm_driver = { 742 .class = I2C_CLASS_HWMON, 743 .driver = { 744 .name = "blinkm", 745 }, 746 .probe = blinkm_probe, 747 .remove = blinkm_remove, 748 .id_table = blinkm_id, 749 .detect = blinkm_detect, 750 .address_list = normal_i2c, 751 }; 752 753 module_i2c_driver(blinkm_driver); 754 755 MODULE_AUTHOR("Jan-Simon Moeller <dl9pf@gmx.de>"); 756 MODULE_DESCRIPTION("BlinkM RGB LED driver"); 757 MODULE_LICENSE("GPL"); 758 759