1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * LED Flash class driver for the AAT1290 4 * 1.5A Step-Up Current Regulator for Flash LEDs 5 * 6 * Copyright (C) 2015, Samsung Electronics Co., Ltd. 7 * Author: Jacek Anaszewski <j.anaszewski@samsung.com> 8 */ 9 10 #include <linux/delay.h> 11 #include <linux/gpio/consumer.h> 12 #include <linux/led-class-flash.h> 13 #include <linux/leds.h> 14 #include <linux/module.h> 15 #include <linux/mutex.h> 16 #include <linux/of.h> 17 #include <linux/pinctrl/consumer.h> 18 #include <linux/platform_device.h> 19 #include <linux/slab.h> 20 #include <media/v4l2-flash-led-class.h> 21 22 #define AAT1290_MOVIE_MODE_CURRENT_ADDR 17 23 #define AAT1290_MAX_MM_CURR_PERCENT_0 16 24 #define AAT1290_MAX_MM_CURR_PERCENT_100 1 25 26 #define AAT1290_FLASH_SAFETY_TIMER_ADDR 18 27 28 #define AAT1290_MOVIE_MODE_CONFIG_ADDR 19 29 #define AAT1290_MOVIE_MODE_OFF 1 30 #define AAT1290_MOVIE_MODE_ON 3 31 32 #define AAT1290_MM_CURRENT_RATIO_ADDR 20 33 #define AAT1290_MM_TO_FL_1_92 1 34 35 #define AAT1290_MM_TO_FL_RATIO 1000 / 1920 36 #define AAT1290_MAX_MM_CURRENT(fl_max) (fl_max * AAT1290_MM_TO_FL_RATIO) 37 38 #define AAT1290_LATCH_TIME_MIN_US 500 39 #define AAT1290_LATCH_TIME_MAX_US 1000 40 #define AAT1290_EN_SET_TICK_TIME_US 1 41 #define AAT1290_FLEN_OFF_DELAY_TIME_US 10 42 #define AAT1290_FLASH_TM_NUM_LEVELS 16 43 #define AAT1290_MM_CURRENT_SCALE_SIZE 15 44 45 #define AAT1290_NAME "aat1290" 46 47 48 struct aat1290_led_config_data { 49 /* maximum LED current in movie mode */ 50 u32 max_mm_current; 51 /* maximum LED current in flash mode */ 52 u32 max_flash_current; 53 /* maximum flash timeout */ 54 u32 max_flash_tm; 55 /* external strobe capability */ 56 bool has_external_strobe; 57 /* max LED brightness level */ 58 enum led_brightness max_brightness; 59 }; 60 61 struct aat1290_led { 62 /* platform device data */ 63 struct platform_device *pdev; 64 /* secures access to the device */ 65 struct mutex lock; 66 67 /* corresponding LED Flash class device */ 68 struct led_classdev_flash fled_cdev; 69 /* V4L2 Flash device */ 70 struct v4l2_flash *v4l2_flash; 71 72 /* FLEN pin */ 73 struct gpio_desc *gpio_fl_en; 74 /* EN|SET pin */ 75 struct gpio_desc *gpio_en_set; 76 /* movie mode current scale */ 77 int *mm_current_scale; 78 /* device mode */ 79 bool movie_mode; 80 /* brightness cache */ 81 unsigned int torch_brightness; 82 }; 83 84 static struct aat1290_led *fled_cdev_to_led( 85 struct led_classdev_flash *fled_cdev) 86 { 87 return container_of(fled_cdev, struct aat1290_led, fled_cdev); 88 } 89 90 static struct led_classdev_flash *led_cdev_to_fled_cdev( 91 struct led_classdev *led_cdev) 92 { 93 return container_of(led_cdev, struct led_classdev_flash, led_cdev); 94 } 95 96 static void aat1290_as2cwire_write(struct aat1290_led *led, int addr, int value) 97 { 98 int i; 99 100 gpiod_direction_output(led->gpio_fl_en, 0); 101 gpiod_direction_output(led->gpio_en_set, 0); 102 103 udelay(AAT1290_FLEN_OFF_DELAY_TIME_US); 104 105 /* write address */ 106 for (i = 0; i < addr; ++i) { 107 udelay(AAT1290_EN_SET_TICK_TIME_US); 108 gpiod_direction_output(led->gpio_en_set, 0); 109 udelay(AAT1290_EN_SET_TICK_TIME_US); 110 gpiod_direction_output(led->gpio_en_set, 1); 111 } 112 113 usleep_range(AAT1290_LATCH_TIME_MIN_US, AAT1290_LATCH_TIME_MAX_US); 114 115 /* write data */ 116 for (i = 0; i < value; ++i) { 117 udelay(AAT1290_EN_SET_TICK_TIME_US); 118 gpiod_direction_output(led->gpio_en_set, 0); 119 udelay(AAT1290_EN_SET_TICK_TIME_US); 120 gpiod_direction_output(led->gpio_en_set, 1); 121 } 122 123 usleep_range(AAT1290_LATCH_TIME_MIN_US, AAT1290_LATCH_TIME_MAX_US); 124 } 125 126 static void aat1290_set_flash_safety_timer(struct aat1290_led *led, 127 unsigned int micro_sec) 128 { 129 struct led_classdev_flash *fled_cdev = &led->fled_cdev; 130 struct led_flash_setting *flash_tm = &fled_cdev->timeout; 131 int flash_tm_reg = AAT1290_FLASH_TM_NUM_LEVELS - 132 (micro_sec / flash_tm->step) + 1; 133 134 aat1290_as2cwire_write(led, AAT1290_FLASH_SAFETY_TIMER_ADDR, 135 flash_tm_reg); 136 } 137 138 /* LED subsystem callbacks */ 139 140 static int aat1290_led_brightness_set(struct led_classdev *led_cdev, 141 enum led_brightness brightness) 142 { 143 struct led_classdev_flash *fled_cdev = led_cdev_to_fled_cdev(led_cdev); 144 struct aat1290_led *led = fled_cdev_to_led(fled_cdev); 145 146 mutex_lock(&led->lock); 147 148 if (brightness == 0) { 149 gpiod_direction_output(led->gpio_fl_en, 0); 150 gpiod_direction_output(led->gpio_en_set, 0); 151 led->movie_mode = false; 152 } else { 153 if (!led->movie_mode) { 154 aat1290_as2cwire_write(led, 155 AAT1290_MM_CURRENT_RATIO_ADDR, 156 AAT1290_MM_TO_FL_1_92); 157 led->movie_mode = true; 158 } 159 160 aat1290_as2cwire_write(led, AAT1290_MOVIE_MODE_CURRENT_ADDR, 161 AAT1290_MAX_MM_CURR_PERCENT_0 - brightness); 162 aat1290_as2cwire_write(led, AAT1290_MOVIE_MODE_CONFIG_ADDR, 163 AAT1290_MOVIE_MODE_ON); 164 } 165 166 mutex_unlock(&led->lock); 167 168 return 0; 169 } 170 171 static int aat1290_led_flash_strobe_set(struct led_classdev_flash *fled_cdev, 172 bool state) 173 174 { 175 struct aat1290_led *led = fled_cdev_to_led(fled_cdev); 176 struct led_classdev *led_cdev = &fled_cdev->led_cdev; 177 struct led_flash_setting *timeout = &fled_cdev->timeout; 178 179 mutex_lock(&led->lock); 180 181 if (state) { 182 aat1290_set_flash_safety_timer(led, timeout->val); 183 gpiod_direction_output(led->gpio_fl_en, 1); 184 } else { 185 gpiod_direction_output(led->gpio_fl_en, 0); 186 gpiod_direction_output(led->gpio_en_set, 0); 187 } 188 189 /* 190 * To reenter movie mode after a flash event the part must be cycled 191 * off and back on to reset the movie mode and reprogrammed via the 192 * AS2Cwire. Therefore the brightness and movie_mode properties needs 193 * to be updated here to reflect the actual state. 194 */ 195 led_cdev->brightness = 0; 196 led->movie_mode = false; 197 198 mutex_unlock(&led->lock); 199 200 return 0; 201 } 202 203 static int aat1290_led_flash_timeout_set(struct led_classdev_flash *fled_cdev, 204 u32 timeout) 205 { 206 /* 207 * Don't do anything - flash timeout is cached in the led-class-flash 208 * core and will be applied in the strobe_set op, as writing the 209 * safety timer register spuriously turns the torch mode on. 210 */ 211 212 return 0; 213 } 214 215 static int aat1290_led_parse_dt(struct aat1290_led *led, 216 struct aat1290_led_config_data *cfg, 217 struct device_node **sub_node) 218 { 219 struct device *dev = &led->pdev->dev; 220 struct device_node *child_node; 221 #if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS) 222 struct pinctrl *pinctrl; 223 #endif 224 int ret = 0; 225 226 led->gpio_fl_en = devm_gpiod_get(dev, "flen", GPIOD_ASIS); 227 if (IS_ERR(led->gpio_fl_en)) { 228 ret = PTR_ERR(led->gpio_fl_en); 229 dev_err(dev, "Unable to claim gpio \"flen\".\n"); 230 return ret; 231 } 232 233 led->gpio_en_set = devm_gpiod_get(dev, "enset", GPIOD_ASIS); 234 if (IS_ERR(led->gpio_en_set)) { 235 ret = PTR_ERR(led->gpio_en_set); 236 dev_err(dev, "Unable to claim gpio \"enset\".\n"); 237 return ret; 238 } 239 240 #if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS) 241 pinctrl = devm_pinctrl_get_select_default(&led->pdev->dev); 242 if (IS_ERR(pinctrl)) { 243 cfg->has_external_strobe = false; 244 dev_info(dev, 245 "No support for external strobe detected.\n"); 246 } else { 247 cfg->has_external_strobe = true; 248 } 249 #endif 250 251 child_node = of_get_next_available_child(dev_of_node(dev), NULL); 252 if (!child_node) { 253 dev_err(dev, "No DT child node found for connected LED.\n"); 254 return -EINVAL; 255 } 256 257 ret = of_property_read_u32(child_node, "led-max-microamp", 258 &cfg->max_mm_current); 259 /* 260 * led-max-microamp will default to 1/20 of flash-max-microamp 261 * in case it is missing. 262 */ 263 if (ret < 0) 264 dev_warn(dev, 265 "led-max-microamp DT property missing\n"); 266 267 ret = of_property_read_u32(child_node, "flash-max-microamp", 268 &cfg->max_flash_current); 269 if (ret < 0) { 270 dev_err(dev, 271 "flash-max-microamp DT property missing\n"); 272 goto err_parse_dt; 273 } 274 275 ret = of_property_read_u32(child_node, "flash-max-timeout-us", 276 &cfg->max_flash_tm); 277 if (ret < 0) { 278 dev_err(dev, 279 "flash-max-timeout-us DT property missing\n"); 280 goto err_parse_dt; 281 } 282 283 *sub_node = child_node; 284 285 err_parse_dt: 286 of_node_put(child_node); 287 288 return ret; 289 } 290 291 static void aat1290_led_validate_mm_current(struct aat1290_led *led, 292 struct aat1290_led_config_data *cfg) 293 { 294 int i, b = 0, e = AAT1290_MM_CURRENT_SCALE_SIZE; 295 296 while (e - b > 1) { 297 i = b + (e - b) / 2; 298 if (cfg->max_mm_current < led->mm_current_scale[i]) 299 e = i; 300 else 301 b = i; 302 } 303 304 cfg->max_mm_current = led->mm_current_scale[b]; 305 cfg->max_brightness = b + 1; 306 } 307 308 static int init_mm_current_scale(struct aat1290_led *led, 309 struct aat1290_led_config_data *cfg) 310 { 311 static const int max_mm_current_percent[] = { 312 20, 22, 25, 28, 32, 36, 40, 45, 50, 56, 313 63, 71, 79, 89, 100 314 }; 315 int i, max_mm_current = 316 AAT1290_MAX_MM_CURRENT(cfg->max_flash_current); 317 318 led->mm_current_scale = devm_kzalloc(&led->pdev->dev, 319 sizeof(max_mm_current_percent), 320 GFP_KERNEL); 321 if (!led->mm_current_scale) 322 return -ENOMEM; 323 324 for (i = 0; i < AAT1290_MM_CURRENT_SCALE_SIZE; ++i) 325 led->mm_current_scale[i] = max_mm_current * 326 max_mm_current_percent[i] / 100; 327 328 return 0; 329 } 330 331 static int aat1290_led_get_configuration(struct aat1290_led *led, 332 struct aat1290_led_config_data *cfg, 333 struct device_node **sub_node) 334 { 335 int ret; 336 337 ret = aat1290_led_parse_dt(led, cfg, sub_node); 338 if (ret < 0) 339 return ret; 340 /* 341 * Init non-linear movie mode current scale basing 342 * on the max flash current from led configuration. 343 */ 344 ret = init_mm_current_scale(led, cfg); 345 if (ret < 0) 346 return ret; 347 348 aat1290_led_validate_mm_current(led, cfg); 349 350 #if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS) 351 #else 352 devm_kfree(&led->pdev->dev, led->mm_current_scale); 353 #endif 354 355 return 0; 356 } 357 358 static void aat1290_init_flash_timeout(struct aat1290_led *led, 359 struct aat1290_led_config_data *cfg) 360 { 361 struct led_classdev_flash *fled_cdev = &led->fled_cdev; 362 struct led_flash_setting *setting; 363 364 /* Init flash timeout setting */ 365 setting = &fled_cdev->timeout; 366 setting->min = cfg->max_flash_tm / AAT1290_FLASH_TM_NUM_LEVELS; 367 setting->max = cfg->max_flash_tm; 368 setting->step = setting->min; 369 setting->val = setting->max; 370 } 371 372 #if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS) 373 static enum led_brightness aat1290_intensity_to_brightness( 374 struct v4l2_flash *v4l2_flash, 375 s32 intensity) 376 { 377 struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev; 378 struct aat1290_led *led = fled_cdev_to_led(fled_cdev); 379 int i; 380 381 for (i = AAT1290_MM_CURRENT_SCALE_SIZE - 1; i >= 0; --i) 382 if (intensity >= led->mm_current_scale[i]) 383 return i + 1; 384 385 return 1; 386 } 387 388 static s32 aat1290_brightness_to_intensity(struct v4l2_flash *v4l2_flash, 389 enum led_brightness brightness) 390 { 391 struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev; 392 struct aat1290_led *led = fled_cdev_to_led(fled_cdev); 393 394 return led->mm_current_scale[brightness - 1]; 395 } 396 397 static int aat1290_led_external_strobe_set(struct v4l2_flash *v4l2_flash, 398 bool enable) 399 { 400 struct aat1290_led *led = fled_cdev_to_led(v4l2_flash->fled_cdev); 401 struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev; 402 struct led_classdev *led_cdev = &fled_cdev->led_cdev; 403 struct pinctrl *pinctrl; 404 405 gpiod_direction_output(led->gpio_fl_en, 0); 406 gpiod_direction_output(led->gpio_en_set, 0); 407 408 led->movie_mode = false; 409 led_cdev->brightness = 0; 410 411 pinctrl = devm_pinctrl_get_select(&led->pdev->dev, 412 enable ? "isp" : "host"); 413 if (IS_ERR(pinctrl)) { 414 dev_warn(&led->pdev->dev, "Unable to switch strobe source.\n"); 415 return PTR_ERR(pinctrl); 416 } 417 418 return 0; 419 } 420 421 static void aat1290_init_v4l2_flash_config(struct aat1290_led *led, 422 struct aat1290_led_config_data *led_cfg, 423 struct v4l2_flash_config *v4l2_sd_cfg) 424 { 425 struct led_classdev *led_cdev = &led->fled_cdev.led_cdev; 426 struct led_flash_setting *s; 427 428 strscpy(v4l2_sd_cfg->dev_name, led_cdev->dev->kobj.name, 429 sizeof(v4l2_sd_cfg->dev_name)); 430 431 s = &v4l2_sd_cfg->intensity; 432 s->min = led->mm_current_scale[0]; 433 s->max = led_cfg->max_mm_current; 434 s->step = 1; 435 s->val = s->max; 436 437 v4l2_sd_cfg->has_external_strobe = led_cfg->has_external_strobe; 438 } 439 440 static const struct v4l2_flash_ops v4l2_flash_ops = { 441 .external_strobe_set = aat1290_led_external_strobe_set, 442 .intensity_to_led_brightness = aat1290_intensity_to_brightness, 443 .led_brightness_to_intensity = aat1290_brightness_to_intensity, 444 }; 445 #else 446 static inline void aat1290_init_v4l2_flash_config(struct aat1290_led *led, 447 struct aat1290_led_config_data *led_cfg, 448 struct v4l2_flash_config *v4l2_sd_cfg) 449 { 450 } 451 static const struct v4l2_flash_ops v4l2_flash_ops; 452 #endif 453 454 static const struct led_flash_ops flash_ops = { 455 .strobe_set = aat1290_led_flash_strobe_set, 456 .timeout_set = aat1290_led_flash_timeout_set, 457 }; 458 459 static int aat1290_led_probe(struct platform_device *pdev) 460 { 461 struct device *dev = &pdev->dev; 462 struct device_node *sub_node = NULL; 463 struct aat1290_led *led; 464 struct led_classdev *led_cdev; 465 struct led_classdev_flash *fled_cdev; 466 struct led_init_data init_data = {}; 467 struct aat1290_led_config_data led_cfg = {}; 468 struct v4l2_flash_config v4l2_sd_cfg = {}; 469 int ret; 470 471 led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL); 472 if (!led) 473 return -ENOMEM; 474 475 led->pdev = pdev; 476 platform_set_drvdata(pdev, led); 477 478 fled_cdev = &led->fled_cdev; 479 fled_cdev->ops = &flash_ops; 480 led_cdev = &fled_cdev->led_cdev; 481 482 ret = aat1290_led_get_configuration(led, &led_cfg, &sub_node); 483 if (ret < 0) 484 return ret; 485 486 mutex_init(&led->lock); 487 488 /* Initialize LED Flash class device */ 489 led_cdev->brightness_set_blocking = aat1290_led_brightness_set; 490 led_cdev->max_brightness = led_cfg.max_brightness; 491 led_cdev->flags |= LED_DEV_CAP_FLASH; 492 493 aat1290_init_flash_timeout(led, &led_cfg); 494 495 init_data.fwnode = of_fwnode_handle(sub_node); 496 init_data.devicename = AAT1290_NAME; 497 498 /* Register LED Flash class device */ 499 ret = led_classdev_flash_register_ext(&pdev->dev, fled_cdev, 500 &init_data); 501 if (ret < 0) 502 goto err_flash_register; 503 504 aat1290_init_v4l2_flash_config(led, &led_cfg, &v4l2_sd_cfg); 505 506 /* Create V4L2 Flash subdev. */ 507 led->v4l2_flash = v4l2_flash_init(dev, of_fwnode_handle(sub_node), 508 fled_cdev, &v4l2_flash_ops, 509 &v4l2_sd_cfg); 510 if (IS_ERR(led->v4l2_flash)) { 511 ret = PTR_ERR(led->v4l2_flash); 512 goto error_v4l2_flash_init; 513 } 514 515 return 0; 516 517 error_v4l2_flash_init: 518 led_classdev_flash_unregister(fled_cdev); 519 err_flash_register: 520 mutex_destroy(&led->lock); 521 522 return ret; 523 } 524 525 static int aat1290_led_remove(struct platform_device *pdev) 526 { 527 struct aat1290_led *led = platform_get_drvdata(pdev); 528 529 v4l2_flash_release(led->v4l2_flash); 530 led_classdev_flash_unregister(&led->fled_cdev); 531 532 mutex_destroy(&led->lock); 533 534 return 0; 535 } 536 537 static const struct of_device_id aat1290_led_dt_match[] = { 538 { .compatible = "skyworks,aat1290" }, 539 {}, 540 }; 541 MODULE_DEVICE_TABLE(of, aat1290_led_dt_match); 542 543 static struct platform_driver aat1290_led_driver = { 544 .probe = aat1290_led_probe, 545 .remove = aat1290_led_remove, 546 .driver = { 547 .name = "aat1290", 548 .of_match_table = aat1290_led_dt_match, 549 }, 550 }; 551 552 module_platform_driver(aat1290_led_driver); 553 554 MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski@samsung.com>"); 555 MODULE_DESCRIPTION("Skyworks Current Regulator for Flash LEDs"); 556 MODULE_LICENSE("GPL v2"); 557