1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * For License see notice in hfc_multi.c 4 * 5 * special IO and init functions for the embedded XHFC board 6 * from Speech Design 7 * 8 */ 9 10 #include <asm/cpm1.h> 11 12 /* Change this to the value used by your board */ 13 #ifndef IMAP_ADDR 14 #define IMAP_ADDR 0xFFF00000 15 #endif 16 17 static void 18 #ifdef HFC_REGISTER_DEBUG 19 HFC_outb_embsd(struct hfc_multi *hc, u_char reg, u_char val, 20 const char *function, int line) 21 #else 22 HFC_outb_embsd(struct hfc_multi *hc, u_char reg, u_char val) 23 #endif 24 { 25 hc->immap->im_ioport.iop_padat |= PA_XHFC_A0; 26 writeb(reg, hc->xhfc_memaddr); 27 hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0); 28 writeb(val, hc->xhfc_memdata); 29 } 30 static u_char 31 #ifdef HFC_REGISTER_DEBUG 32 HFC_inb_embsd(struct hfc_multi *hc, u_char reg, const char *function, int line) 33 #else 34 HFC_inb_embsd(struct hfc_multi *hc, u_char reg) 35 #endif 36 { 37 hc->immap->im_ioport.iop_padat |= PA_XHFC_A0; 38 writeb(reg, hc->xhfc_memaddr); 39 hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0); 40 return readb(hc->xhfc_memdata); 41 } 42 static u_short 43 #ifdef HFC_REGISTER_DEBUG 44 HFC_inw_embsd(struct hfc_multi *hc, u_char reg, const char *function, int line) 45 #else 46 HFC_inw_embsd(struct hfc_multi *hc, u_char reg) 47 #endif 48 { 49 hc->immap->im_ioport.iop_padat |= PA_XHFC_A0; 50 writeb(reg, hc->xhfc_memaddr); 51 hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0); 52 return readb(hc->xhfc_memdata); 53 } 54 static void 55 #ifdef HFC_REGISTER_DEBUG 56 HFC_wait_embsd(struct hfc_multi *hc, const char *function, int line) 57 #else 58 HFC_wait_embsd(struct hfc_multi *hc) 59 #endif 60 { 61 hc->immap->im_ioport.iop_padat |= PA_XHFC_A0; 62 writeb(R_STATUS, hc->xhfc_memaddr); 63 hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0); 64 while (readb(hc->xhfc_memdata) & V_BUSY) 65 cpu_relax(); 66 } 67 68 /* write fifo data (EMBSD) */ 69 void 70 write_fifo_embsd(struct hfc_multi *hc, u_char *data, int len) 71 { 72 hc->immap->im_ioport.iop_padat |= PA_XHFC_A0; 73 *hc->xhfc_memaddr = A_FIFO_DATA0; 74 hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0); 75 while (len) { 76 *hc->xhfc_memdata = *data; 77 data++; 78 len--; 79 } 80 } 81 82 /* read fifo data (EMBSD) */ 83 void 84 read_fifo_embsd(struct hfc_multi *hc, u_char *data, int len) 85 { 86 hc->immap->im_ioport.iop_padat |= PA_XHFC_A0; 87 *hc->xhfc_memaddr = A_FIFO_DATA0; 88 hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0); 89 while (len) { 90 *data = (u_char)(*hc->xhfc_memdata); 91 data++; 92 len--; 93 } 94 } 95 96 static int 97 setup_embedded(struct hfc_multi *hc, struct hm_map *m) 98 { 99 printk(KERN_INFO 100 "HFC-multi: card manufacturer: '%s' card name: '%s' clock: %s\n", 101 m->vendor_name, m->card_name, m->clock2 ? "double" : "normal"); 102 103 hc->pci_dev = NULL; 104 if (m->clock2) 105 test_and_set_bit(HFC_CHIP_CLOCK2, &hc->chip); 106 107 hc->leds = m->leds; 108 hc->ledstate = 0xAFFEAFFE; 109 hc->opticalsupport = m->opticalsupport; 110 111 hc->pci_iobase = 0; 112 hc->pci_membase = 0; 113 hc->xhfc_membase = NULL; 114 hc->xhfc_memaddr = NULL; 115 hc->xhfc_memdata = NULL; 116 117 /* set memory access methods */ 118 if (m->io_mode) /* use mode from card config */ 119 hc->io_mode = m->io_mode; 120 switch (hc->io_mode) { 121 case HFC_IO_MODE_EMBSD: 122 test_and_set_bit(HFC_CHIP_EMBSD, &hc->chip); 123 hc->slots = 128; /* required */ 124 hc->HFC_outb = HFC_outb_embsd; 125 hc->HFC_inb = HFC_inb_embsd; 126 hc->HFC_inw = HFC_inw_embsd; 127 hc->HFC_wait = HFC_wait_embsd; 128 hc->read_fifo = read_fifo_embsd; 129 hc->write_fifo = write_fifo_embsd; 130 hc->xhfc_origmembase = XHFC_MEMBASE + XHFC_OFFSET * hc->id; 131 hc->xhfc_membase = (u_char *)ioremap(hc->xhfc_origmembase, 132 XHFC_MEMSIZE); 133 if (!hc->xhfc_membase) { 134 printk(KERN_WARNING 135 "HFC-multi: failed to remap xhfc address space. " 136 "(internal error)\n"); 137 return -EIO; 138 } 139 hc->xhfc_memaddr = (u_long *)(hc->xhfc_membase + 4); 140 hc->xhfc_memdata = (u_long *)(hc->xhfc_membase); 141 printk(KERN_INFO 142 "HFC-multi: xhfc_membase:%#lx xhfc_origmembase:%#lx " 143 "xhfc_memaddr:%#lx xhfc_memdata:%#lx\n", 144 (u_long)hc->xhfc_membase, hc->xhfc_origmembase, 145 (u_long)hc->xhfc_memaddr, (u_long)hc->xhfc_memdata); 146 break; 147 default: 148 printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n"); 149 return -EIO; 150 } 151 152 /* Prepare the MPC8XX PortA 10 as output (address/data selector) */ 153 hc->immap = (struct immap *)(IMAP_ADDR); 154 hc->immap->im_ioport.iop_papar &= ~(PA_XHFC_A0); 155 hc->immap->im_ioport.iop_paodr &= ~(PA_XHFC_A0); 156 hc->immap->im_ioport.iop_padir |= PA_XHFC_A0; 157 158 /* Prepare the MPC8xx PortB __X__ as input (ISDN__X__IRQ) */ 159 hc->pb_irqmsk = (PB_XHFC_IRQ1 << hc->id); 160 hc->immap->im_cpm.cp_pbpar &= ~(hc->pb_irqmsk); 161 hc->immap->im_cpm.cp_pbodr &= ~(hc->pb_irqmsk); 162 hc->immap->im_cpm.cp_pbdir &= ~(hc->pb_irqmsk); 163 164 /* At this point the needed config is done */ 165 /* fifos are still not enabled */ 166 return 0; 167 } 168