xref: /linux/drivers/irqchip/irq-sa11x0.c (revision 8c994eff8fcfe8ecb1f1dbebed25b4d7bb75be12)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2015 Dmitry Eremin-Solenikov
4  * Copyright (C) 1999-2001 Nicolas Pitre
5  *
6  * Generic IRQ handling for the SA11x0.
7  */
8 #include <linux/init.h>
9 #include <linux/module.h>
10 #include <linux/interrupt.h>
11 #include <linux/io.h>
12 #include <linux/irq.h>
13 #include <linux/irqdomain.h>
14 #include <linux/syscore_ops.h>
15 #include <linux/irqchip/irq-sa11x0.h>
16 
17 #include <soc/sa1100/pwer.h>
18 
19 #include <asm/exception.h>
20 
21 #define ICIP	0x00  /* IC IRQ Pending reg. */
22 #define ICMR	0x04  /* IC Mask Reg.        */
23 #define ICLR	0x08  /* IC Level Reg.       */
24 #define ICCR	0x0C  /* IC Control Reg.     */
25 #define ICFP	0x10  /* IC FIQ Pending reg. */
26 #define ICPR	0x20  /* IC Pending Reg.     */
27 
28 static void __iomem *iobase;
29 
30 /*
31  * We don't need to ACK IRQs on the SA1100 unless they're GPIOs
32  * this is for internal IRQs i.e. from IRQ LCD to RTCAlrm.
33  */
34 static void sa1100_mask_irq(struct irq_data *d)
35 {
36 	u32 reg;
37 
38 	reg = readl_relaxed(iobase + ICMR);
39 	reg &= ~BIT(d->hwirq);
40 	writel_relaxed(reg, iobase + ICMR);
41 }
42 
43 static void sa1100_unmask_irq(struct irq_data *d)
44 {
45 	u32 reg;
46 
47 	reg = readl_relaxed(iobase + ICMR);
48 	reg |= BIT(d->hwirq);
49 	writel_relaxed(reg, iobase + ICMR);
50 }
51 
52 static int sa1100_set_wake(struct irq_data *d, unsigned int on)
53 {
54 	return sa11x0_sc_set_wake(d->hwirq, on);
55 }
56 
57 static struct irq_chip sa1100_normal_chip = {
58 	.name		= "SC",
59 	.irq_ack	= sa1100_mask_irq,
60 	.irq_mask	= sa1100_mask_irq,
61 	.irq_unmask	= sa1100_unmask_irq,
62 	.irq_set_wake	= sa1100_set_wake,
63 };
64 
65 static int sa1100_normal_irqdomain_map(struct irq_domain *d,
66 		unsigned int irq, irq_hw_number_t hwirq)
67 {
68 	irq_set_chip_and_handler(irq, &sa1100_normal_chip,
69 				 handle_level_irq);
70 
71 	return 0;
72 }
73 
74 static const struct irq_domain_ops sa1100_normal_irqdomain_ops = {
75 	.map = sa1100_normal_irqdomain_map,
76 	.xlate = irq_domain_xlate_onetwocell,
77 };
78 
79 static struct irq_domain *sa1100_normal_irqdomain;
80 
81 static struct sa1100irq_state {
82 	unsigned int	saved;
83 	unsigned int	icmr;
84 	unsigned int	iclr;
85 	unsigned int	iccr;
86 } sa1100irq_state;
87 
88 static int sa1100irq_suspend(void)
89 {
90 	struct sa1100irq_state *st = &sa1100irq_state;
91 
92 	st->saved = 1;
93 	st->icmr = readl_relaxed(iobase + ICMR);
94 	st->iclr = readl_relaxed(iobase + ICLR);
95 	st->iccr = readl_relaxed(iobase + ICCR);
96 
97 	/*
98 	 * Disable all GPIO-based interrupts.
99 	 */
100 	writel_relaxed(st->icmr & 0xfffff000, iobase + ICMR);
101 
102 	return 0;
103 }
104 
105 static void sa1100irq_resume(void)
106 {
107 	struct sa1100irq_state *st = &sa1100irq_state;
108 
109 	if (st->saved) {
110 		writel_relaxed(st->iccr, iobase + ICCR);
111 		writel_relaxed(st->iclr, iobase + ICLR);
112 
113 		writel_relaxed(st->icmr, iobase + ICMR);
114 	}
115 }
116 
117 static struct syscore_ops sa1100irq_syscore_ops = {
118 	.suspend	= sa1100irq_suspend,
119 	.resume		= sa1100irq_resume,
120 };
121 
122 static int __init sa1100irq_init_devicefs(void)
123 {
124 	register_syscore_ops(&sa1100irq_syscore_ops);
125 	return 0;
126 }
127 
128 device_initcall(sa1100irq_init_devicefs);
129 
130 static asmlinkage void __exception_irq_entry
131 sa1100_handle_irq(struct pt_regs *regs)
132 {
133 	uint32_t icip, icmr, mask;
134 
135 	do {
136 		icip = readl_relaxed(iobase + ICIP);
137 		icmr = readl_relaxed(iobase + ICMR);
138 		mask = icip & icmr;
139 
140 		if (mask == 0)
141 			break;
142 
143 		generic_handle_domain_irq(sa1100_normal_irqdomain,
144 					  ffs(mask) - 1);
145 	} while (1);
146 }
147 
148 void __init sa11x0_init_irq_nodt(int irq_start, resource_size_t io_start)
149 {
150 	iobase = ioremap(io_start, SZ_64K);
151 	if (WARN_ON(!iobase))
152 		return;
153 
154 	/* disable all IRQs */
155 	writel_relaxed(0, iobase + ICMR);
156 
157 	/* all IRQs are IRQ, not FIQ */
158 	writel_relaxed(0, iobase + ICLR);
159 
160 	/*
161 	 * Whatever the doc says, this has to be set for the wait-on-irq
162 	 * instruction to work... on a SA1100 rev 9 at least.
163 	 */
164 	writel_relaxed(1, iobase + ICCR);
165 
166 	sa1100_normal_irqdomain = irq_domain_add_simple(NULL,
167 			32, irq_start,
168 			&sa1100_normal_irqdomain_ops, NULL);
169 
170 	set_handle_irq(sa1100_handle_irq);
171 }
172