xref: /linux/drivers/irqchip/irq-bcm2835.c (revision 8e07e0e3964ca4e23ce7b68e2096fe660a888942)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright 2010 Broadcom
4  * Copyright 2012 Simon Arlott, Chris Boot, Stephen Warren
5  *
6  * Quirk 1: Shortcut interrupts don't set the bank 1/2 register pending bits
7  *
8  * If an interrupt fires on bank 1 that isn't in the shortcuts list, bit 8
9  * on bank 0 is set to signify that an interrupt in bank 1 has fired, and
10  * to look in the bank 1 status register for more information.
11  *
12  * If an interrupt fires on bank 1 that _is_ in the shortcuts list, its
13  * shortcut bit in bank 0 is set as well as its interrupt bit in the bank 1
14  * status register, but bank 0 bit 8 is _not_ set.
15  *
16  * Quirk 2: You can't mask the register 1/2 pending interrupts
17  *
18  * In a proper cascaded interrupt controller, the interrupt lines with
19  * cascaded interrupt controllers on them are just normal interrupt lines.
20  * You can mask the interrupts and get on with things. With this controller
21  * you can't do that.
22  *
23  * Quirk 3: The shortcut interrupts can't be (un)masked in bank 0
24  *
25  * Those interrupts that have shortcuts can only be masked/unmasked in
26  * their respective banks' enable/disable registers. Doing so in the bank 0
27  * enable/disable registers has no effect.
28  *
29  * The FIQ control register:
30  *  Bits 0-6: IRQ (index in order of interrupts from banks 1, 2, then 0)
31  *  Bit    7: Enable FIQ generation
32  *  Bits  8+: Unused
33  *
34  * An interrupt must be disabled before configuring it for FIQ generation
35  * otherwise both handlers will fire at the same time!
36  */
37 
38 #include <linux/io.h>
39 #include <linux/slab.h>
40 #include <linux/of_address.h>
41 #include <linux/of_irq.h>
42 #include <linux/irqchip.h>
43 #include <linux/irqdomain.h>
44 
45 #include <asm/exception.h>
46 
47 /* Put the bank and irq (32 bits) into the hwirq */
48 #define MAKE_HWIRQ(b, n)	((b << 5) | (n))
49 #define HWIRQ_BANK(i)		(i >> 5)
50 #define HWIRQ_BIT(i)		BIT(i & 0x1f)
51 
52 #define NR_IRQS_BANK0		8
53 #define BANK0_HWIRQ_MASK	0xff
54 /* Shortcuts can't be disabled so any unknown new ones need to be masked */
55 #define SHORTCUT1_MASK		0x00007c00
56 #define SHORTCUT2_MASK		0x001f8000
57 #define SHORTCUT_SHIFT		10
58 #define BANK1_HWIRQ		BIT(8)
59 #define BANK2_HWIRQ		BIT(9)
60 #define BANK0_VALID_MASK	(BANK0_HWIRQ_MASK | BANK1_HWIRQ | BANK2_HWIRQ \
61 					| SHORTCUT1_MASK | SHORTCUT2_MASK)
62 
63 #define REG_FIQ_CONTROL		0x0c
64 #define FIQ_CONTROL_ENABLE	BIT(7)
65 
66 #define NR_BANKS		3
67 #define IRQS_PER_BANK		32
68 
69 static const int reg_pending[] __initconst = { 0x00, 0x04, 0x08 };
70 static const int reg_enable[] __initconst = { 0x18, 0x10, 0x14 };
71 static const int reg_disable[] __initconst = { 0x24, 0x1c, 0x20 };
72 static const int bank_irqs[] __initconst = { 8, 32, 32 };
73 
74 static const int shortcuts[] = {
75 	7, 9, 10, 18, 19,		/* Bank 1 */
76 	21, 22, 23, 24, 25, 30		/* Bank 2 */
77 };
78 
79 struct armctrl_ic {
80 	void __iomem *base;
81 	void __iomem *pending[NR_BANKS];
82 	void __iomem *enable[NR_BANKS];
83 	void __iomem *disable[NR_BANKS];
84 	struct irq_domain *domain;
85 };
86 
87 static struct armctrl_ic intc __read_mostly;
88 static void __exception_irq_entry bcm2835_handle_irq(
89 	struct pt_regs *regs);
90 static void bcm2836_chained_handle_irq(struct irq_desc *desc);
91 
92 static void armctrl_mask_irq(struct irq_data *d)
93 {
94 	writel_relaxed(HWIRQ_BIT(d->hwirq), intc.disable[HWIRQ_BANK(d->hwirq)]);
95 }
96 
97 static void armctrl_unmask_irq(struct irq_data *d)
98 {
99 	writel_relaxed(HWIRQ_BIT(d->hwirq), intc.enable[HWIRQ_BANK(d->hwirq)]);
100 }
101 
102 static struct irq_chip armctrl_chip = {
103 	.name = "ARMCTRL-level",
104 	.irq_mask = armctrl_mask_irq,
105 	.irq_unmask = armctrl_unmask_irq
106 };
107 
108 static int armctrl_xlate(struct irq_domain *d, struct device_node *ctrlr,
109 	const u32 *intspec, unsigned int intsize,
110 	unsigned long *out_hwirq, unsigned int *out_type)
111 {
112 	if (WARN_ON(intsize != 2))
113 		return -EINVAL;
114 
115 	if (WARN_ON(intspec[0] >= NR_BANKS))
116 		return -EINVAL;
117 
118 	if (WARN_ON(intspec[1] >= IRQS_PER_BANK))
119 		return -EINVAL;
120 
121 	if (WARN_ON(intspec[0] == 0 && intspec[1] >= NR_IRQS_BANK0))
122 		return -EINVAL;
123 
124 	*out_hwirq = MAKE_HWIRQ(intspec[0], intspec[1]);
125 	*out_type = IRQ_TYPE_NONE;
126 	return 0;
127 }
128 
129 static const struct irq_domain_ops armctrl_ops = {
130 	.xlate = armctrl_xlate
131 };
132 
133 static int __init armctrl_of_init(struct device_node *node,
134 				  struct device_node *parent,
135 				  bool is_2836)
136 {
137 	void __iomem *base;
138 	int irq, b, i;
139 	u32 reg;
140 
141 	base = of_iomap(node, 0);
142 	if (!base)
143 		panic("%pOF: unable to map IC registers\n", node);
144 
145 	intc.domain = irq_domain_add_linear(node, MAKE_HWIRQ(NR_BANKS, 0),
146 			&armctrl_ops, NULL);
147 	if (!intc.domain)
148 		panic("%pOF: unable to create IRQ domain\n", node);
149 
150 	for (b = 0; b < NR_BANKS; b++) {
151 		intc.pending[b] = base + reg_pending[b];
152 		intc.enable[b] = base + reg_enable[b];
153 		intc.disable[b] = base + reg_disable[b];
154 
155 		for (i = 0; i < bank_irqs[b]; i++) {
156 			irq = irq_create_mapping(intc.domain, MAKE_HWIRQ(b, i));
157 			BUG_ON(irq <= 0);
158 			irq_set_chip_and_handler(irq, &armctrl_chip,
159 				handle_level_irq);
160 			irq_set_probe(irq);
161 		}
162 
163 		reg = readl_relaxed(intc.enable[b]);
164 		if (reg) {
165 			writel_relaxed(reg, intc.disable[b]);
166 			pr_err(FW_BUG "Bootloader left irq enabled: "
167 			       "bank %d irq %*pbl\n", b, IRQS_PER_BANK, &reg);
168 		}
169 	}
170 
171 	reg = readl_relaxed(base + REG_FIQ_CONTROL);
172 	if (reg & FIQ_CONTROL_ENABLE) {
173 		writel_relaxed(0, base + REG_FIQ_CONTROL);
174 		pr_err(FW_BUG "Bootloader left fiq enabled\n");
175 	}
176 
177 	if (is_2836) {
178 		int parent_irq = irq_of_parse_and_map(node, 0);
179 
180 		if (!parent_irq) {
181 			panic("%pOF: unable to get parent interrupt.\n",
182 			      node);
183 		}
184 		irq_set_chained_handler(parent_irq, bcm2836_chained_handle_irq);
185 	} else {
186 		set_handle_irq(bcm2835_handle_irq);
187 	}
188 
189 	return 0;
190 }
191 
192 static int __init bcm2835_armctrl_of_init(struct device_node *node,
193 					  struct device_node *parent)
194 {
195 	return armctrl_of_init(node, parent, false);
196 }
197 
198 static int __init bcm2836_armctrl_of_init(struct device_node *node,
199 					  struct device_node *parent)
200 {
201 	return armctrl_of_init(node, parent, true);
202 }
203 
204 
205 /*
206  * Handle each interrupt across the entire interrupt controller.  This reads the
207  * status register before handling each interrupt, which is necessary given that
208  * handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
209  */
210 
211 static u32 armctrl_translate_bank(int bank)
212 {
213 	u32 stat = readl_relaxed(intc.pending[bank]);
214 
215 	return MAKE_HWIRQ(bank, ffs(stat) - 1);
216 }
217 
218 static u32 armctrl_translate_shortcut(int bank, u32 stat)
219 {
220 	return MAKE_HWIRQ(bank, shortcuts[ffs(stat >> SHORTCUT_SHIFT) - 1]);
221 }
222 
223 static u32 get_next_armctrl_hwirq(void)
224 {
225 	u32 stat = readl_relaxed(intc.pending[0]) & BANK0_VALID_MASK;
226 
227 	if (stat == 0)
228 		return ~0;
229 	else if (stat & BANK0_HWIRQ_MASK)
230 		return MAKE_HWIRQ(0, ffs(stat & BANK0_HWIRQ_MASK) - 1);
231 	else if (stat & SHORTCUT1_MASK)
232 		return armctrl_translate_shortcut(1, stat & SHORTCUT1_MASK);
233 	else if (stat & SHORTCUT2_MASK)
234 		return armctrl_translate_shortcut(2, stat & SHORTCUT2_MASK);
235 	else if (stat & BANK1_HWIRQ)
236 		return armctrl_translate_bank(1);
237 	else if (stat & BANK2_HWIRQ)
238 		return armctrl_translate_bank(2);
239 	else
240 		BUG();
241 }
242 
243 static void __exception_irq_entry bcm2835_handle_irq(
244 	struct pt_regs *regs)
245 {
246 	u32 hwirq;
247 
248 	while ((hwirq = get_next_armctrl_hwirq()) != ~0)
249 		generic_handle_domain_irq(intc.domain, hwirq);
250 }
251 
252 static void bcm2836_chained_handle_irq(struct irq_desc *desc)
253 {
254 	u32 hwirq;
255 
256 	while ((hwirq = get_next_armctrl_hwirq()) != ~0)
257 		generic_handle_domain_irq(intc.domain, hwirq);
258 }
259 
260 IRQCHIP_DECLARE(bcm2835_armctrl_ic, "brcm,bcm2835-armctrl-ic",
261 		bcm2835_armctrl_of_init);
262 IRQCHIP_DECLARE(bcm2836_armctrl_ic, "brcm,bcm2836-armctrl-ic",
263 		bcm2836_armctrl_of_init);
264