1 /* 2 * Copyright 2010 Broadcom 3 * Copyright 2012 Simon Arlott, Chris Boot, Stephen Warren 4 * 5 * This program is free software; you can redistribute it and/or modify 6 * it under the terms of the GNU General Public License as published by 7 * the Free Software Foundation; either version 2 of the License, or 8 * (at your option) any later version. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * Quirk 1: Shortcut interrupts don't set the bank 1/2 register pending bits 16 * 17 * If an interrupt fires on bank 1 that isn't in the shortcuts list, bit 8 18 * on bank 0 is set to signify that an interrupt in bank 1 has fired, and 19 * to look in the bank 1 status register for more information. 20 * 21 * If an interrupt fires on bank 1 that _is_ in the shortcuts list, its 22 * shortcut bit in bank 0 is set as well as its interrupt bit in the bank 1 23 * status register, but bank 0 bit 8 is _not_ set. 24 * 25 * Quirk 2: You can't mask the register 1/2 pending interrupts 26 * 27 * In a proper cascaded interrupt controller, the interrupt lines with 28 * cascaded interrupt controllers on them are just normal interrupt lines. 29 * You can mask the interrupts and get on with things. With this controller 30 * you can't do that. 31 * 32 * Quirk 3: The shortcut interrupts can't be (un)masked in bank 0 33 * 34 * Those interrupts that have shortcuts can only be masked/unmasked in 35 * their respective banks' enable/disable registers. Doing so in the bank 0 36 * enable/disable registers has no effect. 37 * 38 * The FIQ control register: 39 * Bits 0-6: IRQ (index in order of interrupts from banks 1, 2, then 0) 40 * Bit 7: Enable FIQ generation 41 * Bits 8+: Unused 42 * 43 * An interrupt must be disabled before configuring it for FIQ generation 44 * otherwise both handlers will fire at the same time! 45 */ 46 47 #include <linux/io.h> 48 #include <linux/slab.h> 49 #include <linux/of_address.h> 50 #include <linux/of_irq.h> 51 #include <linux/irqdomain.h> 52 #include <linux/irqchip/bcm2835.h> 53 54 #include <asm/exception.h> 55 56 /* Put the bank and irq (32 bits) into the hwirq */ 57 #define MAKE_HWIRQ(b, n) ((b << 5) | (n)) 58 #define HWIRQ_BANK(i) (i >> 5) 59 #define HWIRQ_BIT(i) BIT(i & 0x1f) 60 61 #define NR_IRQS_BANK0 8 62 #define BANK0_HWIRQ_MASK 0xff 63 /* Shortcuts can't be disabled so any unknown new ones need to be masked */ 64 #define SHORTCUT1_MASK 0x00007c00 65 #define SHORTCUT2_MASK 0x001f8000 66 #define SHORTCUT_SHIFT 10 67 #define BANK1_HWIRQ BIT(8) 68 #define BANK2_HWIRQ BIT(9) 69 #define BANK0_VALID_MASK (BANK0_HWIRQ_MASK | BANK1_HWIRQ | BANK2_HWIRQ \ 70 | SHORTCUT1_MASK | SHORTCUT2_MASK) 71 72 #define REG_FIQ_CONTROL 0x0c 73 74 #define NR_BANKS 3 75 #define IRQS_PER_BANK 32 76 77 static int reg_pending[] __initconst = { 0x00, 0x04, 0x08 }; 78 static int reg_enable[] __initconst = { 0x18, 0x10, 0x14 }; 79 static int reg_disable[] __initconst = { 0x24, 0x1c, 0x20 }; 80 static int bank_irqs[] __initconst = { 8, 32, 32 }; 81 82 static const int shortcuts[] = { 83 7, 9, 10, 18, 19, /* Bank 1 */ 84 21, 22, 23, 24, 25, 30 /* Bank 2 */ 85 }; 86 87 struct armctrl_ic { 88 void __iomem *base; 89 void __iomem *pending[NR_BANKS]; 90 void __iomem *enable[NR_BANKS]; 91 void __iomem *disable[NR_BANKS]; 92 struct irq_domain *domain; 93 }; 94 95 static struct armctrl_ic intc __read_mostly; 96 97 static void armctrl_mask_irq(struct irq_data *d) 98 { 99 writel_relaxed(HWIRQ_BIT(d->hwirq), intc.disable[HWIRQ_BANK(d->hwirq)]); 100 } 101 102 static void armctrl_unmask_irq(struct irq_data *d) 103 { 104 writel_relaxed(HWIRQ_BIT(d->hwirq), intc.enable[HWIRQ_BANK(d->hwirq)]); 105 } 106 107 static struct irq_chip armctrl_chip = { 108 .name = "ARMCTRL-level", 109 .irq_mask = armctrl_mask_irq, 110 .irq_unmask = armctrl_unmask_irq 111 }; 112 113 static int armctrl_xlate(struct irq_domain *d, struct device_node *ctrlr, 114 const u32 *intspec, unsigned int intsize, 115 unsigned long *out_hwirq, unsigned int *out_type) 116 { 117 if (WARN_ON(intsize != 2)) 118 return -EINVAL; 119 120 if (WARN_ON(intspec[0] >= NR_BANKS)) 121 return -EINVAL; 122 123 if (WARN_ON(intspec[1] >= IRQS_PER_BANK)) 124 return -EINVAL; 125 126 if (WARN_ON(intspec[0] == 0 && intspec[1] >= NR_IRQS_BANK0)) 127 return -EINVAL; 128 129 *out_hwirq = MAKE_HWIRQ(intspec[0], intspec[1]); 130 *out_type = IRQ_TYPE_NONE; 131 return 0; 132 } 133 134 static struct irq_domain_ops armctrl_ops = { 135 .xlate = armctrl_xlate 136 }; 137 138 static int __init armctrl_of_init(struct device_node *node, 139 struct device_node *parent) 140 { 141 void __iomem *base; 142 int irq, b, i; 143 144 base = of_iomap(node, 0); 145 if (!base) 146 panic("%s: unable to map IC registers\n", 147 node->full_name); 148 149 intc.domain = irq_domain_add_linear(node, MAKE_HWIRQ(NR_BANKS, 0), 150 &armctrl_ops, NULL); 151 if (!intc.domain) 152 panic("%s: unable to create IRQ domain\n", node->full_name); 153 154 for (b = 0; b < NR_BANKS; b++) { 155 intc.pending[b] = base + reg_pending[b]; 156 intc.enable[b] = base + reg_enable[b]; 157 intc.disable[b] = base + reg_disable[b]; 158 159 for (i = 0; i < bank_irqs[b]; i++) { 160 irq = irq_create_mapping(intc.domain, MAKE_HWIRQ(b, i)); 161 BUG_ON(irq <= 0); 162 irq_set_chip_and_handler(irq, &armctrl_chip, 163 handle_level_irq); 164 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); 165 } 166 } 167 return 0; 168 } 169 170 static struct of_device_id irq_of_match[] __initconst = { 171 { .compatible = "brcm,bcm2835-armctrl-ic", .data = armctrl_of_init } 172 }; 173 174 void __init bcm2835_init_irq(void) 175 { 176 of_irq_init(irq_of_match); 177 } 178 179 /* 180 * Handle each interrupt across the entire interrupt controller. This reads the 181 * status register before handling each interrupt, which is necessary given that 182 * handle_IRQ may briefly re-enable interrupts for soft IRQ handling. 183 */ 184 185 static void armctrl_handle_bank(int bank, struct pt_regs *regs) 186 { 187 u32 stat, irq; 188 189 while ((stat = readl_relaxed(intc.pending[bank]))) { 190 irq = MAKE_HWIRQ(bank, ffs(stat) - 1); 191 handle_IRQ(irq_linear_revmap(intc.domain, irq), regs); 192 } 193 } 194 195 static void armctrl_handle_shortcut(int bank, struct pt_regs *regs, 196 u32 stat) 197 { 198 u32 irq = MAKE_HWIRQ(bank, shortcuts[ffs(stat >> SHORTCUT_SHIFT) - 1]); 199 handle_IRQ(irq_linear_revmap(intc.domain, irq), regs); 200 } 201 202 asmlinkage void __exception_irq_entry bcm2835_handle_irq( 203 struct pt_regs *regs) 204 { 205 u32 stat, irq; 206 207 while ((stat = readl_relaxed(intc.pending[0]) & BANK0_VALID_MASK)) { 208 if (stat & BANK0_HWIRQ_MASK) { 209 irq = MAKE_HWIRQ(0, ffs(stat & BANK0_HWIRQ_MASK) - 1); 210 handle_IRQ(irq_linear_revmap(intc.domain, irq), regs); 211 } else if (stat & SHORTCUT1_MASK) { 212 armctrl_handle_shortcut(1, regs, stat & SHORTCUT1_MASK); 213 } else if (stat & SHORTCUT2_MASK) { 214 armctrl_handle_shortcut(2, regs, stat & SHORTCUT2_MASK); 215 } else if (stat & BANK1_HWIRQ) { 216 armctrl_handle_bank(1, regs); 217 } else if (stat & BANK2_HWIRQ) { 218 armctrl_handle_bank(2, regs); 219 } else { 220 BUG(); 221 } 222 } 223 } 224