1 /****************************************************************************** 2 * usbtouchscreen.c 3 * Driver for USB Touchscreens, supporting those devices: 4 * - eGalax Touchkit 5 * includes eTurboTouch CT-410/510/700 6 * - 3M/Microtouch EX II series 7 * - ITM 8 * - PanJit TouchSet 9 * - eTurboTouch 10 * - Gunze AHL61 11 * - DMC TSC-10/25 12 * - IRTOUCHSYSTEMS/UNITOP 13 * - IdealTEK URTC1000 14 * - General Touch 15 * - GoTop Super_Q2/GogoPen/PenPower tablets 16 * - JASTEC USB touch controller/DigiTech DTR-02U 17 * - Zytronic capacitive touchscreen 18 * - NEXIO/iNexio 19 * 20 * Copyright (C) 2004-2007 by Daniel Ritz <daniel.ritz@gmx.ch> 21 * Copyright (C) by Todd E. Johnson (mtouchusb.c) 22 * 23 * This program is free software; you can redistribute it and/or 24 * modify it under the terms of the GNU General Public License as 25 * published by the Free Software Foundation; either version 2 of the 26 * License, or (at your option) any later version. 27 * 28 * This program is distributed in the hope that it will be useful, but 29 * WITHOUT ANY WARRANTY; without even the implied warranty of 30 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 31 * General Public License for more details. 32 * 33 * You should have received a copy of the GNU General Public License 34 * along with this program; if not, write to the Free Software 35 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 36 * 37 * Driver is based on touchkitusb.c 38 * - ITM parts are from itmtouch.c 39 * - 3M parts are from mtouchusb.c 40 * - PanJit parts are from an unmerged driver by Lanslott Gish 41 * - DMC TSC 10/25 are from Holger Schurig, with ideas from an unmerged 42 * driver from Marius Vollmer 43 * 44 *****************************************************************************/ 45 46 //#define DEBUG 47 48 #include <linux/kernel.h> 49 #include <linux/slab.h> 50 #include <linux/input.h> 51 #include <linux/module.h> 52 #include <linux/init.h> 53 #include <linux/usb.h> 54 #include <linux/usb/input.h> 55 #include <linux/hid.h> 56 57 58 #define DRIVER_VERSION "v0.6" 59 #define DRIVER_AUTHOR "Daniel Ritz <daniel.ritz@gmx.ch>" 60 #define DRIVER_DESC "USB Touchscreen Driver" 61 62 static int swap_xy; 63 module_param(swap_xy, bool, 0644); 64 MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped."); 65 66 static int hwcalib_xy; 67 module_param(hwcalib_xy, bool, 0644); 68 MODULE_PARM_DESC(hwcalib_xy, "If set hw-calibrated X/Y are used if available"); 69 70 /* device specifc data/functions */ 71 struct usbtouch_usb; 72 struct usbtouch_device_info { 73 int min_xc, max_xc; 74 int min_yc, max_yc; 75 int min_press, max_press; 76 int rept_size; 77 78 /* 79 * Always service the USB devices irq not just when the input device is 80 * open. This is useful when devices have a watchdog which prevents us 81 * from periodically polling the device. Leave this unset unless your 82 * touchscreen device requires it, as it does consume more of the USB 83 * bandwidth. 84 */ 85 bool irq_always; 86 87 void (*process_pkt) (struct usbtouch_usb *usbtouch, unsigned char *pkt, int len); 88 89 /* 90 * used to get the packet len. possible return values: 91 * > 0: packet len 92 * = 0: skip one byte 93 * < 0: -return value more bytes needed 94 */ 95 int (*get_pkt_len) (unsigned char *pkt, int len); 96 97 int (*read_data) (struct usbtouch_usb *usbtouch, unsigned char *pkt); 98 int (*init) (struct usbtouch_usb *usbtouch); 99 void (*exit) (struct usbtouch_usb *usbtouch); 100 }; 101 102 /* a usbtouch device */ 103 struct usbtouch_usb { 104 unsigned char *data; 105 dma_addr_t data_dma; 106 unsigned char *buffer; 107 int buf_len; 108 struct urb *irq; 109 struct usb_interface *interface; 110 struct input_dev *input; 111 struct usbtouch_device_info *type; 112 char name[128]; 113 char phys[64]; 114 void *priv; 115 116 int x, y; 117 int touch, press; 118 }; 119 120 121 /* device types */ 122 enum { 123 DEVTYPE_IGNORE = -1, 124 DEVTYPE_EGALAX, 125 DEVTYPE_PANJIT, 126 DEVTYPE_3M, 127 DEVTYPE_ITM, 128 DEVTYPE_ETURBO, 129 DEVTYPE_GUNZE, 130 DEVTYPE_DMC_TSC10, 131 DEVTYPE_IRTOUCH, 132 DEVTYPE_IDEALTEK, 133 DEVTYPE_GENERAL_TOUCH, 134 DEVTYPE_GOTOP, 135 DEVTYPE_JASTEC, 136 DEVTYPE_E2I, 137 DEVTYPE_ZYTRONIC, 138 DEVTYPE_TC5UH, 139 DEVTYPE_NEXIO, 140 }; 141 142 #define USB_DEVICE_HID_CLASS(vend, prod) \ 143 .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS \ 144 | USB_DEVICE_ID_MATCH_INT_PROTOCOL \ 145 | USB_DEVICE_ID_MATCH_DEVICE, \ 146 .idVendor = (vend), \ 147 .idProduct = (prod), \ 148 .bInterfaceClass = USB_INTERFACE_CLASS_HID, \ 149 .bInterfaceProtocol = USB_INTERFACE_PROTOCOL_MOUSE 150 151 static const struct usb_device_id usbtouch_devices[] = { 152 #ifdef CONFIG_TOUCHSCREEN_USB_EGALAX 153 /* ignore the HID capable devices, handled by usbhid */ 154 {USB_DEVICE_HID_CLASS(0x0eef, 0x0001), .driver_info = DEVTYPE_IGNORE}, 155 {USB_DEVICE_HID_CLASS(0x0eef, 0x0002), .driver_info = DEVTYPE_IGNORE}, 156 157 /* normal device IDs */ 158 {USB_DEVICE(0x3823, 0x0001), .driver_info = DEVTYPE_EGALAX}, 159 {USB_DEVICE(0x3823, 0x0002), .driver_info = DEVTYPE_EGALAX}, 160 {USB_DEVICE(0x0123, 0x0001), .driver_info = DEVTYPE_EGALAX}, 161 {USB_DEVICE(0x0eef, 0x0001), .driver_info = DEVTYPE_EGALAX}, 162 {USB_DEVICE(0x0eef, 0x0002), .driver_info = DEVTYPE_EGALAX}, 163 {USB_DEVICE(0x1234, 0x0001), .driver_info = DEVTYPE_EGALAX}, 164 {USB_DEVICE(0x1234, 0x0002), .driver_info = DEVTYPE_EGALAX}, 165 #endif 166 167 #ifdef CONFIG_TOUCHSCREEN_USB_PANJIT 168 {USB_DEVICE(0x134c, 0x0001), .driver_info = DEVTYPE_PANJIT}, 169 {USB_DEVICE(0x134c, 0x0002), .driver_info = DEVTYPE_PANJIT}, 170 {USB_DEVICE(0x134c, 0x0003), .driver_info = DEVTYPE_PANJIT}, 171 {USB_DEVICE(0x134c, 0x0004), .driver_info = DEVTYPE_PANJIT}, 172 #endif 173 174 #ifdef CONFIG_TOUCHSCREEN_USB_3M 175 {USB_DEVICE(0x0596, 0x0001), .driver_info = DEVTYPE_3M}, 176 #endif 177 178 #ifdef CONFIG_TOUCHSCREEN_USB_ITM 179 {USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM}, 180 #endif 181 182 #ifdef CONFIG_TOUCHSCREEN_USB_ETURBO 183 {USB_DEVICE(0x1234, 0x5678), .driver_info = DEVTYPE_ETURBO}, 184 #endif 185 186 #ifdef CONFIG_TOUCHSCREEN_USB_GUNZE 187 {USB_DEVICE(0x0637, 0x0001), .driver_info = DEVTYPE_GUNZE}, 188 #endif 189 190 #ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10 191 {USB_DEVICE(0x0afa, 0x03e8), .driver_info = DEVTYPE_DMC_TSC10}, 192 #endif 193 194 #ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH 195 {USB_DEVICE(0x595a, 0x0001), .driver_info = DEVTYPE_IRTOUCH}, 196 {USB_DEVICE(0x6615, 0x0001), .driver_info = DEVTYPE_IRTOUCH}, 197 #endif 198 199 #ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK 200 {USB_DEVICE(0x1391, 0x1000), .driver_info = DEVTYPE_IDEALTEK}, 201 #endif 202 203 #ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH 204 {USB_DEVICE(0x0dfc, 0x0001), .driver_info = DEVTYPE_GENERAL_TOUCH}, 205 #endif 206 207 #ifdef CONFIG_TOUCHSCREEN_USB_GOTOP 208 {USB_DEVICE(0x08f2, 0x007f), .driver_info = DEVTYPE_GOTOP}, 209 {USB_DEVICE(0x08f2, 0x00ce), .driver_info = DEVTYPE_GOTOP}, 210 {USB_DEVICE(0x08f2, 0x00f4), .driver_info = DEVTYPE_GOTOP}, 211 #endif 212 213 #ifdef CONFIG_TOUCHSCREEN_USB_JASTEC 214 {USB_DEVICE(0x0f92, 0x0001), .driver_info = DEVTYPE_JASTEC}, 215 #endif 216 217 #ifdef CONFIG_TOUCHSCREEN_USB_E2I 218 {USB_DEVICE(0x1ac7, 0x0001), .driver_info = DEVTYPE_E2I}, 219 #endif 220 221 #ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC 222 {USB_DEVICE(0x14c8, 0x0003), .driver_info = DEVTYPE_ZYTRONIC}, 223 #endif 224 225 #ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC5UH 226 {USB_DEVICE(0x0664, 0x0309), .driver_info = DEVTYPE_TC5UH}, 227 #endif 228 229 #ifdef CONFIG_TOUCHSCREEN_USB_NEXIO 230 /* data interface only */ 231 {USB_DEVICE_AND_INTERFACE_INFO(0x10f0, 0x2002, 0x0a, 0x00, 0x00), 232 .driver_info = DEVTYPE_NEXIO}, 233 {USB_DEVICE_AND_INTERFACE_INFO(0x1870, 0x0001, 0x0a, 0x00, 0x00), 234 .driver_info = DEVTYPE_NEXIO}, 235 #endif 236 237 {} 238 }; 239 240 241 /***************************************************************************** 242 * e2i Part 243 */ 244 245 #ifdef CONFIG_TOUCHSCREEN_USB_E2I 246 static int e2i_init(struct usbtouch_usb *usbtouch) 247 { 248 int ret; 249 struct usb_device *udev = interface_to_usbdev(usbtouch->interface); 250 251 ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 252 0x01, 0x02, 0x0000, 0x0081, 253 NULL, 0, USB_CTRL_SET_TIMEOUT); 254 255 dbg("%s - usb_control_msg - E2I_RESET - bytes|err: %d", 256 __func__, ret); 257 return ret; 258 } 259 260 static int e2i_read_data(struct usbtouch_usb *dev, unsigned char *pkt) 261 { 262 int tmp = (pkt[0] << 8) | pkt[1]; 263 dev->x = (pkt[2] << 8) | pkt[3]; 264 dev->y = (pkt[4] << 8) | pkt[5]; 265 266 tmp = tmp - 0xA000; 267 dev->touch = (tmp > 0); 268 dev->press = (tmp > 0 ? tmp : 0); 269 270 return 1; 271 } 272 #endif 273 274 275 /***************************************************************************** 276 * eGalax part 277 */ 278 279 #ifdef CONFIG_TOUCHSCREEN_USB_EGALAX 280 281 #ifndef MULTI_PACKET 282 #define MULTI_PACKET 283 #endif 284 285 #define EGALAX_PKT_TYPE_MASK 0xFE 286 #define EGALAX_PKT_TYPE_REPT 0x80 287 #define EGALAX_PKT_TYPE_DIAG 0x0A 288 289 static int egalax_read_data(struct usbtouch_usb *dev, unsigned char *pkt) 290 { 291 if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT) 292 return 0; 293 294 dev->x = ((pkt[3] & 0x0F) << 7) | (pkt[4] & 0x7F); 295 dev->y = ((pkt[1] & 0x0F) << 7) | (pkt[2] & 0x7F); 296 dev->touch = pkt[0] & 0x01; 297 298 return 1; 299 } 300 301 static int egalax_get_pkt_len(unsigned char *buf, int len) 302 { 303 switch (buf[0] & EGALAX_PKT_TYPE_MASK) { 304 case EGALAX_PKT_TYPE_REPT: 305 return 5; 306 307 case EGALAX_PKT_TYPE_DIAG: 308 if (len < 2) 309 return -1; 310 311 return buf[1] + 2; 312 } 313 314 return 0; 315 } 316 #endif 317 318 319 /***************************************************************************** 320 * PanJit Part 321 */ 322 #ifdef CONFIG_TOUCHSCREEN_USB_PANJIT 323 static int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt) 324 { 325 dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1]; 326 dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3]; 327 dev->touch = pkt[0] & 0x01; 328 329 return 1; 330 } 331 #endif 332 333 334 /***************************************************************************** 335 * 3M/Microtouch Part 336 */ 337 #ifdef CONFIG_TOUCHSCREEN_USB_3M 338 339 #define MTOUCHUSB_ASYNC_REPORT 1 340 #define MTOUCHUSB_RESET 7 341 #define MTOUCHUSB_REQ_CTRLLR_ID 10 342 343 static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) 344 { 345 if (hwcalib_xy) { 346 dev->x = (pkt[4] << 8) | pkt[3]; 347 dev->y = 0xffff - ((pkt[6] << 8) | pkt[5]); 348 } else { 349 dev->x = (pkt[8] << 8) | pkt[7]; 350 dev->y = (pkt[10] << 8) | pkt[9]; 351 } 352 dev->touch = (pkt[2] & 0x40) ? 1 : 0; 353 354 return 1; 355 } 356 357 static int mtouch_init(struct usbtouch_usb *usbtouch) 358 { 359 int ret, i; 360 struct usb_device *udev = interface_to_usbdev(usbtouch->interface); 361 362 ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 363 MTOUCHUSB_RESET, 364 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 365 1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); 366 dbg("%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d", 367 __func__, ret); 368 if (ret < 0) 369 return ret; 370 msleep(150); 371 372 for (i = 0; i < 3; i++) { 373 ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 374 MTOUCHUSB_ASYNC_REPORT, 375 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 376 1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT); 377 dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d", 378 __func__, ret); 379 if (ret >= 0) 380 break; 381 if (ret != -EPIPE) 382 return ret; 383 } 384 385 /* Default min/max xy are the raw values, override if using hw-calib */ 386 if (hwcalib_xy) { 387 input_set_abs_params(usbtouch->input, ABS_X, 0, 0xffff, 0, 0); 388 input_set_abs_params(usbtouch->input, ABS_Y, 0, 0xffff, 0, 0); 389 } 390 391 return 0; 392 } 393 #endif 394 395 396 /***************************************************************************** 397 * ITM Part 398 */ 399 #ifdef CONFIG_TOUCHSCREEN_USB_ITM 400 static int itm_read_data(struct usbtouch_usb *dev, unsigned char *pkt) 401 { 402 int touch; 403 /* 404 * ITM devices report invalid x/y data if not touched. 405 * if the screen was touched before but is not touched any more 406 * report touch as 0 with the last valid x/y data once. then stop 407 * reporting data until touched again. 408 */ 409 dev->press = ((pkt[2] & 0x01) << 7) | (pkt[5] & 0x7F); 410 411 touch = ~pkt[7] & 0x20; 412 if (!touch) { 413 if (dev->touch) { 414 dev->touch = 0; 415 return 1; 416 } 417 418 return 0; 419 } 420 421 dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F); 422 dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F); 423 dev->touch = touch; 424 425 return 1; 426 } 427 #endif 428 429 430 /***************************************************************************** 431 * eTurboTouch part 432 */ 433 #ifdef CONFIG_TOUCHSCREEN_USB_ETURBO 434 #ifndef MULTI_PACKET 435 #define MULTI_PACKET 436 #endif 437 static int eturbo_read_data(struct usbtouch_usb *dev, unsigned char *pkt) 438 { 439 unsigned int shift; 440 441 /* packets should start with sync */ 442 if (!(pkt[0] & 0x80)) 443 return 0; 444 445 shift = (6 - (pkt[0] & 0x03)); 446 dev->x = ((pkt[3] << 7) | pkt[4]) >> shift; 447 dev->y = ((pkt[1] << 7) | pkt[2]) >> shift; 448 dev->touch = (pkt[0] & 0x10) ? 1 : 0; 449 450 return 1; 451 } 452 453 static int eturbo_get_pkt_len(unsigned char *buf, int len) 454 { 455 if (buf[0] & 0x80) 456 return 5; 457 if (buf[0] == 0x01) 458 return 3; 459 return 0; 460 } 461 #endif 462 463 464 /***************************************************************************** 465 * Gunze part 466 */ 467 #ifdef CONFIG_TOUCHSCREEN_USB_GUNZE 468 static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt) 469 { 470 if (!(pkt[0] & 0x80) || ((pkt[1] | pkt[2] | pkt[3]) & 0x80)) 471 return 0; 472 473 dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[2] & 0x7F); 474 dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[3] & 0x7F); 475 dev->touch = pkt[0] & 0x20; 476 477 return 1; 478 } 479 #endif 480 481 /***************************************************************************** 482 * DMC TSC-10/25 Part 483 * 484 * Documentation about the controller and it's protocol can be found at 485 * http://www.dmccoltd.com/files/controler/tsc10usb_pi_e.pdf 486 * http://www.dmccoltd.com/files/controler/tsc25_usb_e.pdf 487 */ 488 #ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10 489 490 /* supported data rates. currently using 130 */ 491 #define TSC10_RATE_POINT 0x50 492 #define TSC10_RATE_30 0x40 493 #define TSC10_RATE_50 0x41 494 #define TSC10_RATE_80 0x42 495 #define TSC10_RATE_100 0x43 496 #define TSC10_RATE_130 0x44 497 #define TSC10_RATE_150 0x45 498 499 /* commands */ 500 #define TSC10_CMD_RESET 0x55 501 #define TSC10_CMD_RATE 0x05 502 #define TSC10_CMD_DATA1 0x01 503 504 static int dmc_tsc10_init(struct usbtouch_usb *usbtouch) 505 { 506 struct usb_device *dev = interface_to_usbdev(usbtouch->interface); 507 int ret = -ENOMEM; 508 unsigned char *buf; 509 510 buf = kmalloc(2, GFP_KERNEL); 511 if (!buf) 512 goto err_nobuf; 513 /* reset */ 514 buf[0] = buf[1] = 0xFF; 515 ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0), 516 TSC10_CMD_RESET, 517 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 518 0, 0, buf, 2, USB_CTRL_SET_TIMEOUT); 519 if (ret < 0) 520 goto err_out; 521 if (buf[0] != 0x06) { 522 ret = -ENODEV; 523 goto err_out; 524 } 525 526 /* set coordinate output rate */ 527 buf[0] = buf[1] = 0xFF; 528 ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0), 529 TSC10_CMD_RATE, 530 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 531 TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT); 532 if (ret < 0) 533 goto err_out; 534 if ((buf[0] != 0x06) && (buf[0] != 0x15 || buf[1] != 0x01)) { 535 ret = -ENODEV; 536 goto err_out; 537 } 538 539 /* start sending data */ 540 ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0), 541 TSC10_CMD_DATA1, 542 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 543 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); 544 err_out: 545 kfree(buf); 546 err_nobuf: 547 return ret; 548 } 549 550 551 static int dmc_tsc10_read_data(struct usbtouch_usb *dev, unsigned char *pkt) 552 { 553 dev->x = ((pkt[2] & 0x03) << 8) | pkt[1]; 554 dev->y = ((pkt[4] & 0x03) << 8) | pkt[3]; 555 dev->touch = pkt[0] & 0x01; 556 557 return 1; 558 } 559 #endif 560 561 562 /***************************************************************************** 563 * IRTOUCH Part 564 */ 565 #ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH 566 static int irtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) 567 { 568 dev->x = (pkt[3] << 8) | pkt[2]; 569 dev->y = (pkt[5] << 8) | pkt[4]; 570 dev->touch = (pkt[1] & 0x03) ? 1 : 0; 571 572 return 1; 573 } 574 #endif 575 576 /***************************************************************************** 577 * ET&T TC5UH part 578 */ 579 #ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC5UH 580 static int tc5uh_read_data(struct usbtouch_usb *dev, unsigned char *pkt) 581 { 582 dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1]; 583 dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3]; 584 dev->touch = pkt[0] & 0x01; 585 586 return 1; 587 } 588 #endif 589 590 /***************************************************************************** 591 * IdealTEK URTC1000 Part 592 */ 593 #ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK 594 #ifndef MULTI_PACKET 595 #define MULTI_PACKET 596 #endif 597 static int idealtek_get_pkt_len(unsigned char *buf, int len) 598 { 599 if (buf[0] & 0x80) 600 return 5; 601 if (buf[0] == 0x01) 602 return len; 603 return 0; 604 } 605 606 static int idealtek_read_data(struct usbtouch_usb *dev, unsigned char *pkt) 607 { 608 switch (pkt[0] & 0x98) { 609 case 0x88: 610 /* touch data in IdealTEK mode */ 611 dev->x = (pkt[1] << 5) | (pkt[2] >> 2); 612 dev->y = (pkt[3] << 5) | (pkt[4] >> 2); 613 dev->touch = (pkt[0] & 0x40) ? 1 : 0; 614 return 1; 615 616 case 0x98: 617 /* touch data in MT emulation mode */ 618 dev->x = (pkt[2] << 5) | (pkt[1] >> 2); 619 dev->y = (pkt[4] << 5) | (pkt[3] >> 2); 620 dev->touch = (pkt[0] & 0x40) ? 1 : 0; 621 return 1; 622 623 default: 624 return 0; 625 } 626 } 627 #endif 628 629 /***************************************************************************** 630 * General Touch Part 631 */ 632 #ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH 633 static int general_touch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) 634 { 635 dev->x = (pkt[2] << 8) | pkt[1]; 636 dev->y = (pkt[4] << 8) | pkt[3]; 637 dev->press = pkt[5] & 0xff; 638 dev->touch = pkt[0] & 0x01; 639 640 return 1; 641 } 642 #endif 643 644 /***************************************************************************** 645 * GoTop Part 646 */ 647 #ifdef CONFIG_TOUCHSCREEN_USB_GOTOP 648 static int gotop_read_data(struct usbtouch_usb *dev, unsigned char *pkt) 649 { 650 dev->x = ((pkt[1] & 0x38) << 4) | pkt[2]; 651 dev->y = ((pkt[1] & 0x07) << 7) | pkt[3]; 652 dev->touch = pkt[0] & 0x01; 653 654 return 1; 655 } 656 #endif 657 658 /***************************************************************************** 659 * JASTEC Part 660 */ 661 #ifdef CONFIG_TOUCHSCREEN_USB_JASTEC 662 static int jastec_read_data(struct usbtouch_usb *dev, unsigned char *pkt) 663 { 664 dev->x = ((pkt[0] & 0x3f) << 6) | (pkt[2] & 0x3f); 665 dev->y = ((pkt[1] & 0x3f) << 6) | (pkt[3] & 0x3f); 666 dev->touch = (pkt[0] & 0x40) >> 6; 667 668 return 1; 669 } 670 #endif 671 672 /***************************************************************************** 673 * Zytronic Part 674 */ 675 #ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC 676 static int zytronic_read_data(struct usbtouch_usb *dev, unsigned char *pkt) 677 { 678 switch (pkt[0]) { 679 case 0x3A: /* command response */ 680 dbg("%s: Command response %d", __func__, pkt[1]); 681 break; 682 683 case 0xC0: /* down */ 684 dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7); 685 dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7); 686 dev->touch = 1; 687 dbg("%s: down %d,%d", __func__, dev->x, dev->y); 688 return 1; 689 690 case 0x80: /* up */ 691 dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7); 692 dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7); 693 dev->touch = 0; 694 dbg("%s: up %d,%d", __func__, dev->x, dev->y); 695 return 1; 696 697 default: 698 dbg("%s: Unknown return %d", __func__, pkt[0]); 699 break; 700 } 701 702 return 0; 703 } 704 #endif 705 706 /***************************************************************************** 707 * NEXIO Part 708 */ 709 #ifdef CONFIG_TOUCHSCREEN_USB_NEXIO 710 711 #define NEXIO_TIMEOUT 5000 712 #define NEXIO_BUFSIZE 1024 713 #define NEXIO_THRESHOLD 50 714 715 struct nexio_priv { 716 struct urb *ack; 717 unsigned char *ack_buf; 718 }; 719 720 struct nexio_touch_packet { 721 u8 flags; /* 0xe1 = touch, 0xe1 = release */ 722 __be16 data_len; /* total bytes of touch data */ 723 __be16 x_len; /* bytes for X axis */ 724 __be16 y_len; /* bytes for Y axis */ 725 u8 data[]; 726 } __attribute__ ((packed)); 727 728 static unsigned char nexio_ack_pkt[2] = { 0xaa, 0x02 }; 729 static unsigned char nexio_init_pkt[4] = { 0x82, 0x04, 0x0a, 0x0f }; 730 731 static void nexio_ack_complete(struct urb *urb) 732 { 733 } 734 735 static int nexio_init(struct usbtouch_usb *usbtouch) 736 { 737 struct usb_device *dev = interface_to_usbdev(usbtouch->interface); 738 struct usb_host_interface *interface = usbtouch->interface->cur_altsetting; 739 struct nexio_priv *priv; 740 int ret = -ENOMEM; 741 int actual_len, i; 742 unsigned char *buf; 743 char *firmware_ver = NULL, *device_name = NULL; 744 int input_ep = 0, output_ep = 0; 745 746 /* find first input and output endpoint */ 747 for (i = 0; i < interface->desc.bNumEndpoints; i++) { 748 if (!input_ep && 749 usb_endpoint_dir_in(&interface->endpoint[i].desc)) 750 input_ep = interface->endpoint[i].desc.bEndpointAddress; 751 if (!output_ep && 752 usb_endpoint_dir_out(&interface->endpoint[i].desc)) 753 output_ep = interface->endpoint[i].desc.bEndpointAddress; 754 } 755 if (!input_ep || !output_ep) 756 return -ENXIO; 757 758 buf = kmalloc(NEXIO_BUFSIZE, GFP_KERNEL); 759 if (!buf) 760 goto out_buf; 761 762 /* two empty reads */ 763 for (i = 0; i < 2; i++) { 764 ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep), 765 buf, NEXIO_BUFSIZE, &actual_len, 766 NEXIO_TIMEOUT); 767 if (ret < 0) 768 goto out_buf; 769 } 770 771 /* send init command */ 772 memcpy(buf, nexio_init_pkt, sizeof(nexio_init_pkt)); 773 ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, output_ep), 774 buf, sizeof(nexio_init_pkt), &actual_len, 775 NEXIO_TIMEOUT); 776 if (ret < 0) 777 goto out_buf; 778 779 /* read replies */ 780 for (i = 0; i < 3; i++) { 781 memset(buf, 0, NEXIO_BUFSIZE); 782 ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep), 783 buf, NEXIO_BUFSIZE, &actual_len, 784 NEXIO_TIMEOUT); 785 if (ret < 0 || actual_len < 1 || buf[1] != actual_len) 786 continue; 787 switch (buf[0]) { 788 case 0x83: /* firmware version */ 789 if (!firmware_ver) 790 firmware_ver = kstrdup(&buf[2], GFP_KERNEL); 791 break; 792 case 0x84: /* device name */ 793 if (!device_name) 794 device_name = kstrdup(&buf[2], GFP_KERNEL); 795 break; 796 } 797 } 798 799 printk(KERN_INFO "Nexio device: %s, firmware version: %s\n", 800 device_name, firmware_ver); 801 802 kfree(firmware_ver); 803 kfree(device_name); 804 805 /* prepare ACK URB */ 806 ret = -ENOMEM; 807 808 usbtouch->priv = kmalloc(sizeof(struct nexio_priv), GFP_KERNEL); 809 if (!usbtouch->priv) 810 goto out_buf; 811 812 priv = usbtouch->priv; 813 814 priv->ack_buf = kmalloc(sizeof(nexio_ack_pkt), GFP_KERNEL); 815 if (!priv->ack_buf) 816 goto err_priv; 817 818 memcpy(priv->ack_buf, nexio_ack_pkt, sizeof(nexio_ack_pkt)); 819 820 priv->ack = usb_alloc_urb(0, GFP_KERNEL); 821 if (!priv->ack) { 822 dbg("%s - usb_alloc_urb failed: usbtouch->ack", __func__); 823 goto err_ack_buf; 824 } 825 826 usb_fill_bulk_urb(priv->ack, dev, usb_sndbulkpipe(dev, output_ep), 827 priv->ack_buf, sizeof(nexio_ack_pkt), 828 nexio_ack_complete, usbtouch); 829 ret = 0; 830 goto out_buf; 831 832 err_ack_buf: 833 kfree(priv->ack_buf); 834 err_priv: 835 kfree(priv); 836 out_buf: 837 kfree(buf); 838 return ret; 839 } 840 841 static void nexio_exit(struct usbtouch_usb *usbtouch) 842 { 843 struct nexio_priv *priv = usbtouch->priv; 844 845 usb_kill_urb(priv->ack); 846 usb_free_urb(priv->ack); 847 kfree(priv->ack_buf); 848 kfree(priv); 849 } 850 851 static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt) 852 { 853 int x, y, begin_x, begin_y, end_x, end_y, w, h, ret; 854 struct nexio_touch_packet *packet = (void *) pkt; 855 struct nexio_priv *priv = usbtouch->priv; 856 857 /* got touch data? */ 858 if ((pkt[0] & 0xe0) != 0xe0) 859 return 0; 860 861 /* send ACK */ 862 ret = usb_submit_urb(priv->ack, GFP_ATOMIC); 863 864 if (!usbtouch->type->max_xc) { 865 usbtouch->type->max_xc = 2 * be16_to_cpu(packet->x_len); 866 input_set_abs_params(usbtouch->input, ABS_X, 0, 867 2 * be16_to_cpu(packet->x_len), 0, 0); 868 usbtouch->type->max_yc = 2 * be16_to_cpu(packet->y_len); 869 input_set_abs_params(usbtouch->input, ABS_Y, 0, 870 2 * be16_to_cpu(packet->y_len), 0, 0); 871 } 872 /* 873 * The device reports state of IR sensors on X and Y axes. 874 * Each byte represents "darkness" percentage (0-100) of one element. 875 * 17" touchscreen reports only 64 x 52 bytes so the resolution is low. 876 * This also means that there's a limited multi-touch capability but 877 * it's disabled (and untested) here as there's no X driver for that. 878 */ 879 begin_x = end_x = begin_y = end_y = -1; 880 for (x = 0; x < be16_to_cpu(packet->x_len); x++) { 881 if (begin_x == -1 && packet->data[x] > NEXIO_THRESHOLD) { 882 begin_x = x; 883 continue; 884 } 885 if (end_x == -1 && begin_x != -1 && packet->data[x] < NEXIO_THRESHOLD) { 886 end_x = x - 1; 887 for (y = be16_to_cpu(packet->x_len); 888 y < be16_to_cpu(packet->data_len); y++) { 889 if (begin_y == -1 && packet->data[y] > NEXIO_THRESHOLD) { 890 begin_y = y - be16_to_cpu(packet->x_len); 891 continue; 892 } 893 if (end_y == -1 && 894 begin_y != -1 && packet->data[y] < NEXIO_THRESHOLD) { 895 end_y = y - 1 - be16_to_cpu(packet->x_len); 896 w = end_x - begin_x; 897 h = end_y - begin_y; 898 #if 0 899 /* multi-touch */ 900 input_report_abs(usbtouch->input, 901 ABS_MT_TOUCH_MAJOR, max(w,h)); 902 input_report_abs(usbtouch->input, 903 ABS_MT_TOUCH_MINOR, min(x,h)); 904 input_report_abs(usbtouch->input, 905 ABS_MT_POSITION_X, 2*begin_x+w); 906 input_report_abs(usbtouch->input, 907 ABS_MT_POSITION_Y, 2*begin_y+h); 908 input_report_abs(usbtouch->input, 909 ABS_MT_ORIENTATION, w > h); 910 input_mt_sync(usbtouch->input); 911 #endif 912 /* single touch */ 913 usbtouch->x = 2 * begin_x + w; 914 usbtouch->y = 2 * begin_y + h; 915 usbtouch->touch = packet->flags & 0x01; 916 begin_y = end_y = -1; 917 return 1; 918 } 919 } 920 begin_x = end_x = -1; 921 } 922 923 } 924 return 0; 925 } 926 #endif 927 928 929 /***************************************************************************** 930 * the different device descriptors 931 */ 932 #ifdef MULTI_PACKET 933 static void usbtouch_process_multi(struct usbtouch_usb *usbtouch, 934 unsigned char *pkt, int len); 935 #endif 936 937 static struct usbtouch_device_info usbtouch_dev_info[] = { 938 #ifdef CONFIG_TOUCHSCREEN_USB_EGALAX 939 [DEVTYPE_EGALAX] = { 940 .min_xc = 0x0, 941 .max_xc = 0x07ff, 942 .min_yc = 0x0, 943 .max_yc = 0x07ff, 944 .rept_size = 16, 945 .process_pkt = usbtouch_process_multi, 946 .get_pkt_len = egalax_get_pkt_len, 947 .read_data = egalax_read_data, 948 }, 949 #endif 950 951 #ifdef CONFIG_TOUCHSCREEN_USB_PANJIT 952 [DEVTYPE_PANJIT] = { 953 .min_xc = 0x0, 954 .max_xc = 0x0fff, 955 .min_yc = 0x0, 956 .max_yc = 0x0fff, 957 .rept_size = 8, 958 .read_data = panjit_read_data, 959 }, 960 #endif 961 962 #ifdef CONFIG_TOUCHSCREEN_USB_3M 963 [DEVTYPE_3M] = { 964 .min_xc = 0x0, 965 .max_xc = 0x4000, 966 .min_yc = 0x0, 967 .max_yc = 0x4000, 968 .rept_size = 11, 969 .read_data = mtouch_read_data, 970 .init = mtouch_init, 971 }, 972 #endif 973 974 #ifdef CONFIG_TOUCHSCREEN_USB_ITM 975 [DEVTYPE_ITM] = { 976 .min_xc = 0x0, 977 .max_xc = 0x0fff, 978 .min_yc = 0x0, 979 .max_yc = 0x0fff, 980 .max_press = 0xff, 981 .rept_size = 8, 982 .read_data = itm_read_data, 983 }, 984 #endif 985 986 #ifdef CONFIG_TOUCHSCREEN_USB_ETURBO 987 [DEVTYPE_ETURBO] = { 988 .min_xc = 0x0, 989 .max_xc = 0x07ff, 990 .min_yc = 0x0, 991 .max_yc = 0x07ff, 992 .rept_size = 8, 993 .process_pkt = usbtouch_process_multi, 994 .get_pkt_len = eturbo_get_pkt_len, 995 .read_data = eturbo_read_data, 996 }, 997 #endif 998 999 #ifdef CONFIG_TOUCHSCREEN_USB_GUNZE 1000 [DEVTYPE_GUNZE] = { 1001 .min_xc = 0x0, 1002 .max_xc = 0x0fff, 1003 .min_yc = 0x0, 1004 .max_yc = 0x0fff, 1005 .rept_size = 4, 1006 .read_data = gunze_read_data, 1007 }, 1008 #endif 1009 1010 #ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10 1011 [DEVTYPE_DMC_TSC10] = { 1012 .min_xc = 0x0, 1013 .max_xc = 0x03ff, 1014 .min_yc = 0x0, 1015 .max_yc = 0x03ff, 1016 .rept_size = 5, 1017 .init = dmc_tsc10_init, 1018 .read_data = dmc_tsc10_read_data, 1019 }, 1020 #endif 1021 1022 #ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH 1023 [DEVTYPE_IRTOUCH] = { 1024 .min_xc = 0x0, 1025 .max_xc = 0x0fff, 1026 .min_yc = 0x0, 1027 .max_yc = 0x0fff, 1028 .rept_size = 8, 1029 .read_data = irtouch_read_data, 1030 }, 1031 #endif 1032 1033 #ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK 1034 [DEVTYPE_IDEALTEK] = { 1035 .min_xc = 0x0, 1036 .max_xc = 0x0fff, 1037 .min_yc = 0x0, 1038 .max_yc = 0x0fff, 1039 .rept_size = 8, 1040 .process_pkt = usbtouch_process_multi, 1041 .get_pkt_len = idealtek_get_pkt_len, 1042 .read_data = idealtek_read_data, 1043 }, 1044 #endif 1045 1046 #ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH 1047 [DEVTYPE_GENERAL_TOUCH] = { 1048 .min_xc = 0x0, 1049 .max_xc = 0x7fff, 1050 .min_yc = 0x0, 1051 .max_yc = 0x7fff, 1052 .rept_size = 7, 1053 .read_data = general_touch_read_data, 1054 }, 1055 #endif 1056 1057 #ifdef CONFIG_TOUCHSCREEN_USB_GOTOP 1058 [DEVTYPE_GOTOP] = { 1059 .min_xc = 0x0, 1060 .max_xc = 0x03ff, 1061 .min_yc = 0x0, 1062 .max_yc = 0x03ff, 1063 .rept_size = 4, 1064 .read_data = gotop_read_data, 1065 }, 1066 #endif 1067 1068 #ifdef CONFIG_TOUCHSCREEN_USB_JASTEC 1069 [DEVTYPE_JASTEC] = { 1070 .min_xc = 0x0, 1071 .max_xc = 0x0fff, 1072 .min_yc = 0x0, 1073 .max_yc = 0x0fff, 1074 .rept_size = 4, 1075 .read_data = jastec_read_data, 1076 }, 1077 #endif 1078 1079 #ifdef CONFIG_TOUCHSCREEN_USB_E2I 1080 [DEVTYPE_E2I] = { 1081 .min_xc = 0x0, 1082 .max_xc = 0x7fff, 1083 .min_yc = 0x0, 1084 .max_yc = 0x7fff, 1085 .rept_size = 6, 1086 .init = e2i_init, 1087 .read_data = e2i_read_data, 1088 }, 1089 #endif 1090 1091 #ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC 1092 [DEVTYPE_ZYTRONIC] = { 1093 .min_xc = 0x0, 1094 .max_xc = 0x03ff, 1095 .min_yc = 0x0, 1096 .max_yc = 0x03ff, 1097 .rept_size = 5, 1098 .read_data = zytronic_read_data, 1099 .irq_always = true, 1100 }, 1101 #endif 1102 1103 #ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC5UH 1104 [DEVTYPE_TC5UH] = { 1105 .min_xc = 0x0, 1106 .max_xc = 0x0fff, 1107 .min_yc = 0x0, 1108 .max_yc = 0x0fff, 1109 .rept_size = 5, 1110 .read_data = tc5uh_read_data, 1111 }, 1112 #endif 1113 1114 #ifdef CONFIG_TOUCHSCREEN_USB_NEXIO 1115 [DEVTYPE_NEXIO] = { 1116 .rept_size = 128, 1117 .irq_always = true, 1118 .read_data = nexio_read_data, 1119 .init = nexio_init, 1120 .exit = nexio_exit, 1121 }, 1122 #endif 1123 }; 1124 1125 1126 /***************************************************************************** 1127 * Generic Part 1128 */ 1129 static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch, 1130 unsigned char *pkt, int len) 1131 { 1132 struct usbtouch_device_info *type = usbtouch->type; 1133 1134 if (!type->read_data(usbtouch, pkt)) 1135 return; 1136 1137 input_report_key(usbtouch->input, BTN_TOUCH, usbtouch->touch); 1138 1139 if (swap_xy) { 1140 input_report_abs(usbtouch->input, ABS_X, usbtouch->y); 1141 input_report_abs(usbtouch->input, ABS_Y, usbtouch->x); 1142 } else { 1143 input_report_abs(usbtouch->input, ABS_X, usbtouch->x); 1144 input_report_abs(usbtouch->input, ABS_Y, usbtouch->y); 1145 } 1146 if (type->max_press) 1147 input_report_abs(usbtouch->input, ABS_PRESSURE, usbtouch->press); 1148 input_sync(usbtouch->input); 1149 } 1150 1151 1152 #ifdef MULTI_PACKET 1153 static void usbtouch_process_multi(struct usbtouch_usb *usbtouch, 1154 unsigned char *pkt, int len) 1155 { 1156 unsigned char *buffer; 1157 int pkt_len, pos, buf_len, tmp; 1158 1159 /* process buffer */ 1160 if (unlikely(usbtouch->buf_len)) { 1161 /* try to get size */ 1162 pkt_len = usbtouch->type->get_pkt_len( 1163 usbtouch->buffer, usbtouch->buf_len); 1164 1165 /* drop? */ 1166 if (unlikely(!pkt_len)) 1167 goto out_flush_buf; 1168 1169 /* need to append -pkt_len bytes before able to get size */ 1170 if (unlikely(pkt_len < 0)) { 1171 int append = -pkt_len; 1172 if (unlikely(append > len)) 1173 append = len; 1174 if (usbtouch->buf_len + append >= usbtouch->type->rept_size) 1175 goto out_flush_buf; 1176 memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, append); 1177 usbtouch->buf_len += append; 1178 1179 pkt_len = usbtouch->type->get_pkt_len( 1180 usbtouch->buffer, usbtouch->buf_len); 1181 if (pkt_len < 0) 1182 return; 1183 } 1184 1185 /* append */ 1186 tmp = pkt_len - usbtouch->buf_len; 1187 if (usbtouch->buf_len + tmp >= usbtouch->type->rept_size) 1188 goto out_flush_buf; 1189 memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, tmp); 1190 usbtouch_process_pkt(usbtouch, usbtouch->buffer, pkt_len); 1191 1192 buffer = pkt + tmp; 1193 buf_len = len - tmp; 1194 } else { 1195 buffer = pkt; 1196 buf_len = len; 1197 } 1198 1199 /* loop over the received packet, process */ 1200 pos = 0; 1201 while (pos < buf_len) { 1202 /* get packet len */ 1203 pkt_len = usbtouch->type->get_pkt_len(buffer + pos, 1204 buf_len - pos); 1205 1206 /* unknown packet: skip one byte */ 1207 if (unlikely(!pkt_len)) { 1208 pos++; 1209 continue; 1210 } 1211 1212 /* full packet: process */ 1213 if (likely((pkt_len > 0) && (pkt_len <= buf_len - pos))) { 1214 usbtouch_process_pkt(usbtouch, buffer + pos, pkt_len); 1215 } else { 1216 /* incomplete packet: save in buffer */ 1217 memcpy(usbtouch->buffer, buffer + pos, buf_len - pos); 1218 usbtouch->buf_len = buf_len - pos; 1219 return; 1220 } 1221 pos += pkt_len; 1222 } 1223 1224 out_flush_buf: 1225 usbtouch->buf_len = 0; 1226 return; 1227 } 1228 #endif 1229 1230 1231 static void usbtouch_irq(struct urb *urb) 1232 { 1233 struct usbtouch_usb *usbtouch = urb->context; 1234 int retval; 1235 1236 switch (urb->status) { 1237 case 0: 1238 /* success */ 1239 break; 1240 case -ETIME: 1241 /* this urb is timing out */ 1242 dbg("%s - urb timed out - was the device unplugged?", 1243 __func__); 1244 return; 1245 case -ECONNRESET: 1246 case -ENOENT: 1247 case -ESHUTDOWN: 1248 case -EPIPE: 1249 /* this urb is terminated, clean up */ 1250 dbg("%s - urb shutting down with status: %d", 1251 __func__, urb->status); 1252 return; 1253 default: 1254 dbg("%s - nonzero urb status received: %d", 1255 __func__, urb->status); 1256 goto exit; 1257 } 1258 1259 usbtouch->type->process_pkt(usbtouch, usbtouch->data, urb->actual_length); 1260 1261 exit: 1262 retval = usb_submit_urb(urb, GFP_ATOMIC); 1263 if (retval) 1264 err("%s - usb_submit_urb failed with result: %d", 1265 __func__, retval); 1266 } 1267 1268 static int usbtouch_open(struct input_dev *input) 1269 { 1270 struct usbtouch_usb *usbtouch = input_get_drvdata(input); 1271 1272 usbtouch->irq->dev = interface_to_usbdev(usbtouch->interface); 1273 1274 if (!usbtouch->type->irq_always) { 1275 if (usb_submit_urb(usbtouch->irq, GFP_KERNEL)) 1276 return -EIO; 1277 } 1278 1279 return 0; 1280 } 1281 1282 static void usbtouch_close(struct input_dev *input) 1283 { 1284 struct usbtouch_usb *usbtouch = input_get_drvdata(input); 1285 1286 if (!usbtouch->type->irq_always) 1287 usb_kill_urb(usbtouch->irq); 1288 } 1289 1290 1291 static void usbtouch_free_buffers(struct usb_device *udev, 1292 struct usbtouch_usb *usbtouch) 1293 { 1294 usb_buffer_free(udev, usbtouch->type->rept_size, 1295 usbtouch->data, usbtouch->data_dma); 1296 kfree(usbtouch->buffer); 1297 } 1298 1299 static struct usb_endpoint_descriptor * 1300 usbtouch_get_input_endpoint(struct usb_host_interface *interface) 1301 { 1302 int i; 1303 1304 for (i = 0; i < interface->desc.bNumEndpoints; i++) 1305 if (usb_endpoint_dir_in(&interface->endpoint[i].desc)) 1306 return &interface->endpoint[i].desc; 1307 1308 return NULL; 1309 } 1310 1311 static int usbtouch_probe(struct usb_interface *intf, 1312 const struct usb_device_id *id) 1313 { 1314 struct usbtouch_usb *usbtouch; 1315 struct input_dev *input_dev; 1316 struct usb_endpoint_descriptor *endpoint; 1317 struct usb_device *udev = interface_to_usbdev(intf); 1318 struct usbtouch_device_info *type; 1319 int err = -ENOMEM; 1320 1321 /* some devices are ignored */ 1322 if (id->driver_info == DEVTYPE_IGNORE) 1323 return -ENODEV; 1324 1325 endpoint = usbtouch_get_input_endpoint(intf->cur_altsetting); 1326 if (!endpoint) 1327 return -ENXIO; 1328 1329 usbtouch = kzalloc(sizeof(struct usbtouch_usb), GFP_KERNEL); 1330 input_dev = input_allocate_device(); 1331 if (!usbtouch || !input_dev) 1332 goto out_free; 1333 1334 type = &usbtouch_dev_info[id->driver_info]; 1335 usbtouch->type = type; 1336 if (!type->process_pkt) 1337 type->process_pkt = usbtouch_process_pkt; 1338 1339 usbtouch->data = usb_buffer_alloc(udev, type->rept_size, 1340 GFP_KERNEL, &usbtouch->data_dma); 1341 if (!usbtouch->data) 1342 goto out_free; 1343 1344 if (type->get_pkt_len) { 1345 usbtouch->buffer = kmalloc(type->rept_size, GFP_KERNEL); 1346 if (!usbtouch->buffer) 1347 goto out_free_buffers; 1348 } 1349 1350 usbtouch->irq = usb_alloc_urb(0, GFP_KERNEL); 1351 if (!usbtouch->irq) { 1352 dbg("%s - usb_alloc_urb failed: usbtouch->irq", __func__); 1353 goto out_free_buffers; 1354 } 1355 1356 usbtouch->interface = intf; 1357 usbtouch->input = input_dev; 1358 1359 if (udev->manufacturer) 1360 strlcpy(usbtouch->name, udev->manufacturer, sizeof(usbtouch->name)); 1361 1362 if (udev->product) { 1363 if (udev->manufacturer) 1364 strlcat(usbtouch->name, " ", sizeof(usbtouch->name)); 1365 strlcat(usbtouch->name, udev->product, sizeof(usbtouch->name)); 1366 } 1367 1368 if (!strlen(usbtouch->name)) 1369 snprintf(usbtouch->name, sizeof(usbtouch->name), 1370 "USB Touchscreen %04x:%04x", 1371 le16_to_cpu(udev->descriptor.idVendor), 1372 le16_to_cpu(udev->descriptor.idProduct)); 1373 1374 usb_make_path(udev, usbtouch->phys, sizeof(usbtouch->phys)); 1375 strlcat(usbtouch->phys, "/input0", sizeof(usbtouch->phys)); 1376 1377 input_dev->name = usbtouch->name; 1378 input_dev->phys = usbtouch->phys; 1379 usb_to_input_id(udev, &input_dev->id); 1380 input_dev->dev.parent = &intf->dev; 1381 1382 input_set_drvdata(input_dev, usbtouch); 1383 1384 input_dev->open = usbtouch_open; 1385 input_dev->close = usbtouch_close; 1386 1387 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); 1388 input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); 1389 input_set_abs_params(input_dev, ABS_X, type->min_xc, type->max_xc, 0, 0); 1390 input_set_abs_params(input_dev, ABS_Y, type->min_yc, type->max_yc, 0, 0); 1391 if (type->max_press) 1392 input_set_abs_params(input_dev, ABS_PRESSURE, type->min_press, 1393 type->max_press, 0, 0); 1394 1395 if (usb_endpoint_type(endpoint) == USB_ENDPOINT_XFER_INT) 1396 usb_fill_int_urb(usbtouch->irq, udev, 1397 usb_rcvintpipe(udev, endpoint->bEndpointAddress), 1398 usbtouch->data, type->rept_size, 1399 usbtouch_irq, usbtouch, endpoint->bInterval); 1400 else 1401 usb_fill_bulk_urb(usbtouch->irq, udev, 1402 usb_rcvbulkpipe(udev, endpoint->bEndpointAddress), 1403 usbtouch->data, type->rept_size, 1404 usbtouch_irq, usbtouch); 1405 1406 usbtouch->irq->dev = udev; 1407 usbtouch->irq->transfer_dma = usbtouch->data_dma; 1408 usbtouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; 1409 1410 /* device specific init */ 1411 if (type->init) { 1412 err = type->init(usbtouch); 1413 if (err) { 1414 dbg("%s - type->init() failed, err: %d", __func__, err); 1415 goto out_free_urb; 1416 } 1417 } 1418 1419 err = input_register_device(usbtouch->input); 1420 if (err) { 1421 dbg("%s - input_register_device failed, err: %d", __func__, err); 1422 goto out_do_exit; 1423 } 1424 1425 usb_set_intfdata(intf, usbtouch); 1426 1427 if (usbtouch->type->irq_always) { 1428 err = usb_submit_urb(usbtouch->irq, GFP_KERNEL); 1429 if (err) { 1430 err("%s - usb_submit_urb failed with result: %d", 1431 __func__, err); 1432 goto out_unregister_input; 1433 } 1434 } 1435 1436 return 0; 1437 1438 out_unregister_input: 1439 input_unregister_device(input_dev); 1440 input_dev = NULL; 1441 out_do_exit: 1442 if (type->exit) 1443 type->exit(usbtouch); 1444 out_free_urb: 1445 usb_free_urb(usbtouch->irq); 1446 out_free_buffers: 1447 usbtouch_free_buffers(udev, usbtouch); 1448 out_free: 1449 input_free_device(input_dev); 1450 kfree(usbtouch); 1451 return err; 1452 } 1453 1454 static void usbtouch_disconnect(struct usb_interface *intf) 1455 { 1456 struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); 1457 1458 dbg("%s - called", __func__); 1459 1460 if (!usbtouch) 1461 return; 1462 1463 dbg("%s - usbtouch is initialized, cleaning up", __func__); 1464 usb_set_intfdata(intf, NULL); 1465 /* this will stop IO via close */ 1466 input_unregister_device(usbtouch->input); 1467 usb_free_urb(usbtouch->irq); 1468 if (usbtouch->type->exit) 1469 usbtouch->type->exit(usbtouch); 1470 usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch); 1471 kfree(usbtouch); 1472 } 1473 1474 MODULE_DEVICE_TABLE(usb, usbtouch_devices); 1475 1476 static struct usb_driver usbtouch_driver = { 1477 .name = "usbtouchscreen", 1478 .probe = usbtouch_probe, 1479 .disconnect = usbtouch_disconnect, 1480 .id_table = usbtouch_devices, 1481 }; 1482 1483 static int __init usbtouch_init(void) 1484 { 1485 return usb_register(&usbtouch_driver); 1486 } 1487 1488 static void __exit usbtouch_cleanup(void) 1489 { 1490 usb_deregister(&usbtouch_driver); 1491 } 1492 1493 module_init(usbtouch_init); 1494 module_exit(usbtouch_cleanup); 1495 1496 MODULE_AUTHOR(DRIVER_AUTHOR); 1497 MODULE_DESCRIPTION(DRIVER_DESC); 1498 MODULE_LICENSE("GPL"); 1499 1500 MODULE_ALIAS("touchkitusb"); 1501 MODULE_ALIAS("itmtouch"); 1502 MODULE_ALIAS("mtouchusb"); 1503