1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Raydium touchscreen I2C driver. 4 * 5 * Copyright (C) 2012-2014, Raydium Semiconductor Corporation. 6 * 7 * Raydium reserves the right to make changes without further notice 8 * to the materials described herein. Raydium does not assume any 9 * liability arising out of the application described herein. 10 * 11 * Contact Raydium Semiconductor Corporation at www.rad-ic.com 12 */ 13 14 #include <linux/acpi.h> 15 #include <linux/delay.h> 16 #include <linux/firmware.h> 17 #include <linux/gpio/consumer.h> 18 #include <linux/i2c.h> 19 #include <linux/input.h> 20 #include <linux/input/mt.h> 21 #include <linux/interrupt.h> 22 #include <linux/module.h> 23 #include <linux/of.h> 24 #include <linux/pm_wakeirq.h> 25 #include <linux/regulator/consumer.h> 26 #include <linux/slab.h> 27 #include <asm/unaligned.h> 28 29 /* Slave I2C mode */ 30 #define RM_BOOT_BLDR 0x02 31 #define RM_BOOT_MAIN 0x03 32 33 /* I2C bootoloader commands */ 34 #define RM_CMD_BOOT_PAGE_WRT 0x0B /* send bl page write */ 35 #define RM_CMD_BOOT_WRT 0x11 /* send bl write */ 36 #define RM_CMD_BOOT_ACK 0x22 /* send ack*/ 37 #define RM_CMD_BOOT_CHK 0x33 /* send data check */ 38 #define RM_CMD_BOOT_READ 0x44 /* send wait bl data ready*/ 39 40 #define RM_BOOT_RDY 0xFF /* bl data ready */ 41 #define RM_BOOT_CMD_READHWID 0x0E /* read hwid */ 42 43 /* I2C main commands */ 44 #define RM_CMD_QUERY_BANK 0x2B 45 #define RM_CMD_DATA_BANK 0x4D 46 #define RM_CMD_ENTER_SLEEP 0x4E 47 #define RM_CMD_BANK_SWITCH 0xAA 48 49 #define RM_RESET_MSG_ADDR 0x40000004 50 51 #define RM_MAX_READ_SIZE 56 52 #define RM_PACKET_CRC_SIZE 2 53 54 /* Touch relative info */ 55 #define RM_MAX_RETRIES 3 56 #define RM_RETRY_DELAY_MS 20 57 #define RM_MAX_TOUCH_NUM 10 58 #define RM_BOOT_DELAY_MS 100 59 60 /* Offsets in contact data */ 61 #define RM_CONTACT_STATE_POS 0 62 #define RM_CONTACT_X_POS 1 63 #define RM_CONTACT_Y_POS 3 64 #define RM_CONTACT_PRESSURE_POS 5 65 #define RM_CONTACT_WIDTH_X_POS 6 66 #define RM_CONTACT_WIDTH_Y_POS 7 67 68 /* Bootloader relative info */ 69 #define RM_BL_WRT_CMD_SIZE 3 /* bl flash wrt cmd size */ 70 #define RM_BL_WRT_PKG_SIZE 32 /* bl wrt pkg size */ 71 #define RM_BL_WRT_LEN (RM_BL_WRT_PKG_SIZE + RM_BL_WRT_CMD_SIZE) 72 #define RM_FW_PAGE_SIZE 128 73 #define RM_MAX_FW_RETRIES 30 74 #define RM_MAX_FW_SIZE 0xD000 75 76 #define RM_POWERON_DELAY_USEC 500 77 #define RM_RESET_DELAY_MSEC 50 78 79 enum raydium_bl_cmd { 80 BL_HEADER = 0, 81 BL_PAGE_STR, 82 BL_PKG_IDX, 83 BL_DATA_STR, 84 }; 85 86 enum raydium_bl_ack { 87 RAYDIUM_ACK_NULL = 0, 88 RAYDIUM_WAIT_READY, 89 RAYDIUM_PATH_READY, 90 }; 91 92 enum raydium_boot_mode { 93 RAYDIUM_TS_MAIN = 0, 94 RAYDIUM_TS_BLDR, 95 }; 96 97 /* Response to RM_CMD_DATA_BANK request */ 98 struct raydium_data_info { 99 __le32 data_bank_addr; 100 u8 pkg_size; 101 u8 tp_info_size; 102 }; 103 104 struct raydium_info { 105 __le32 hw_ver; /*device version */ 106 u8 main_ver; 107 u8 sub_ver; 108 __le16 ft_ver; /* test version */ 109 u8 x_num; 110 u8 y_num; 111 __le16 x_max; 112 __le16 y_max; 113 u8 x_res; /* units/mm */ 114 u8 y_res; /* units/mm */ 115 }; 116 117 /* struct raydium_data - represents state of Raydium touchscreen device */ 118 struct raydium_data { 119 struct i2c_client *client; 120 struct input_dev *input; 121 122 struct regulator *avdd; 123 struct regulator *vccio; 124 struct gpio_desc *reset_gpio; 125 126 struct raydium_info info; 127 128 struct mutex sysfs_mutex; 129 130 u8 *report_data; 131 132 u32 data_bank_addr; 133 u8 report_size; 134 u8 contact_size; 135 u8 pkg_size; 136 137 enum raydium_boot_mode boot_mode; 138 }; 139 140 /* 141 * Header to be sent for RM_CMD_BANK_SWITCH command. This is used by 142 * raydium_i2c_{read|send} below. 143 */ 144 struct __packed raydium_bank_switch_header { 145 u8 cmd; 146 __be32 be_addr; 147 }; 148 149 static int raydium_i2c_xfer(struct i2c_client *client, u32 addr, 150 struct i2c_msg *xfer, size_t xfer_count) 151 { 152 int ret; 153 /* 154 * If address is greater than 255, then RM_CMD_BANK_SWITCH needs to be 155 * sent first. Else, skip the header i.e. xfer[0]. 156 */ 157 int xfer_start_idx = (addr > 0xff) ? 0 : 1; 158 xfer_count -= xfer_start_idx; 159 160 ret = i2c_transfer(client->adapter, &xfer[xfer_start_idx], xfer_count); 161 if (likely(ret == xfer_count)) 162 return 0; 163 164 return ret < 0 ? ret : -EIO; 165 } 166 167 static int raydium_i2c_send(struct i2c_client *client, 168 u32 addr, const void *data, size_t len) 169 { 170 int tries = 0; 171 int error; 172 u8 *tx_buf; 173 u8 reg_addr = addr & 0xff; 174 175 tx_buf = kmalloc(len + 1, GFP_KERNEL); 176 if (!tx_buf) 177 return -ENOMEM; 178 179 tx_buf[0] = reg_addr; 180 memcpy(tx_buf + 1, data, len); 181 182 do { 183 struct raydium_bank_switch_header header = { 184 .cmd = RM_CMD_BANK_SWITCH, 185 .be_addr = cpu_to_be32(addr), 186 }; 187 188 /* 189 * Perform as a single i2c_transfer transaction to ensure that 190 * no other I2C transactions are initiated on the bus to any 191 * other device in between. Initiating transacations to other 192 * devices after RM_CMD_BANK_SWITCH is sent is known to cause 193 * issues. This is also why regmap infrastructure cannot be used 194 * for this driver. Regmap handles page(bank) switch and reads 195 * as separate i2c_transfer() operations. This can result in 196 * problems if the Raydium device is on a shared I2C bus. 197 */ 198 struct i2c_msg xfer[] = { 199 { 200 .addr = client->addr, 201 .len = sizeof(header), 202 .buf = (u8 *)&header, 203 }, 204 { 205 .addr = client->addr, 206 .len = len + 1, 207 .buf = tx_buf, 208 }, 209 }; 210 211 error = raydium_i2c_xfer(client, addr, xfer, ARRAY_SIZE(xfer)); 212 if (likely(!error)) 213 goto out; 214 215 msleep(RM_RETRY_DELAY_MS); 216 } while (++tries < RM_MAX_RETRIES); 217 218 dev_err(&client->dev, "%s failed: %d\n", __func__, error); 219 out: 220 kfree(tx_buf); 221 return error; 222 } 223 224 static int raydium_i2c_read(struct i2c_client *client, 225 u32 addr, void *data, size_t len) 226 { 227 int error; 228 229 while (len) { 230 u8 reg_addr = addr & 0xff; 231 struct raydium_bank_switch_header header = { 232 .cmd = RM_CMD_BANK_SWITCH, 233 .be_addr = cpu_to_be32(addr), 234 }; 235 size_t xfer_len = min_t(size_t, len, RM_MAX_READ_SIZE); 236 237 /* 238 * Perform as a single i2c_transfer transaction to ensure that 239 * no other I2C transactions are initiated on the bus to any 240 * other device in between. Initiating transacations to other 241 * devices after RM_CMD_BANK_SWITCH is sent is known to cause 242 * issues. This is also why regmap infrastructure cannot be used 243 * for this driver. Regmap handles page(bank) switch and writes 244 * as separate i2c_transfer() operations. This can result in 245 * problems if the Raydium device is on a shared I2C bus. 246 */ 247 struct i2c_msg xfer[] = { 248 { 249 .addr = client->addr, 250 .len = sizeof(header), 251 .buf = (u8 *)&header, 252 }, 253 { 254 .addr = client->addr, 255 .len = 1, 256 .buf = ®_addr, 257 }, 258 { 259 .addr = client->addr, 260 .len = xfer_len, 261 .buf = data, 262 .flags = I2C_M_RD, 263 } 264 }; 265 266 error = raydium_i2c_xfer(client, addr, xfer, ARRAY_SIZE(xfer)); 267 if (unlikely(error)) 268 return error; 269 270 len -= xfer_len; 271 data += xfer_len; 272 addr += xfer_len; 273 } 274 275 return 0; 276 } 277 278 static int raydium_i2c_sw_reset(struct i2c_client *client) 279 { 280 const u8 soft_rst_cmd = 0x01; 281 int error; 282 283 error = raydium_i2c_send(client, RM_RESET_MSG_ADDR, &soft_rst_cmd, 284 sizeof(soft_rst_cmd)); 285 if (error) { 286 dev_err(&client->dev, "software reset failed: %d\n", error); 287 return error; 288 } 289 290 msleep(RM_RESET_DELAY_MSEC); 291 292 return 0; 293 } 294 295 static int raydium_i2c_query_ts_bootloader_info(struct raydium_data *ts) 296 { 297 struct i2c_client *client = ts->client; 298 static const u8 get_hwid[] = { RM_BOOT_CMD_READHWID, 299 0x10, 0xc0, 0x01, 0x00, 0x04, 0x00 }; 300 u8 rbuf[5] = { 0 }; 301 u32 hw_ver; 302 int error; 303 304 error = raydium_i2c_send(client, RM_CMD_BOOT_WRT, 305 get_hwid, sizeof(get_hwid)); 306 if (error) { 307 dev_err(&client->dev, "WRT HWID command failed: %d\n", error); 308 return error; 309 } 310 311 error = raydium_i2c_send(client, RM_CMD_BOOT_ACK, rbuf, 1); 312 if (error) { 313 dev_err(&client->dev, "Ack HWID command failed: %d\n", error); 314 return error; 315 } 316 317 error = raydium_i2c_read(client, RM_CMD_BOOT_CHK, rbuf, sizeof(rbuf)); 318 if (error) { 319 dev_err(&client->dev, "Read HWID command failed: %d (%4ph)\n", 320 error, rbuf + 1); 321 hw_ver = 0xffffffffUL; 322 } else { 323 hw_ver = get_unaligned_be32(rbuf + 1); 324 } 325 326 ts->info.hw_ver = cpu_to_le32(hw_ver); 327 ts->info.main_ver = 0xff; 328 ts->info.sub_ver = 0xff; 329 330 return error; 331 } 332 333 static int raydium_i2c_query_ts_info(struct raydium_data *ts) 334 { 335 struct i2c_client *client = ts->client; 336 struct raydium_data_info data_info; 337 __le32 query_bank_addr; 338 339 int error, retry_cnt; 340 341 for (retry_cnt = 0; retry_cnt < RM_MAX_RETRIES; retry_cnt++) { 342 error = raydium_i2c_read(client, RM_CMD_DATA_BANK, 343 &data_info, sizeof(data_info)); 344 if (error) 345 continue; 346 347 /* 348 * Warn user if we already allocated memory for reports and 349 * then the size changed (due to firmware update?) and keep 350 * old size instead. 351 */ 352 if (ts->report_data && ts->pkg_size != data_info.pkg_size) { 353 dev_warn(&client->dev, 354 "report size changes, was: %d, new: %d\n", 355 ts->pkg_size, data_info.pkg_size); 356 } else { 357 ts->pkg_size = data_info.pkg_size; 358 ts->report_size = ts->pkg_size - RM_PACKET_CRC_SIZE; 359 } 360 361 ts->contact_size = data_info.tp_info_size; 362 ts->data_bank_addr = le32_to_cpu(data_info.data_bank_addr); 363 364 dev_dbg(&client->dev, 365 "data_bank_addr: %#08x, report_size: %d, contact_size: %d\n", 366 ts->data_bank_addr, ts->report_size, ts->contact_size); 367 368 error = raydium_i2c_read(client, RM_CMD_QUERY_BANK, 369 &query_bank_addr, 370 sizeof(query_bank_addr)); 371 if (error) 372 continue; 373 374 error = raydium_i2c_read(client, le32_to_cpu(query_bank_addr), 375 &ts->info, sizeof(ts->info)); 376 if (error) 377 continue; 378 379 return 0; 380 } 381 382 dev_err(&client->dev, "failed to query device parameters: %d\n", error); 383 return error; 384 } 385 386 static int raydium_i2c_check_fw_status(struct raydium_data *ts) 387 { 388 struct i2c_client *client = ts->client; 389 static const u8 bl_ack = 0x62; 390 static const u8 main_ack = 0x66; 391 u8 buf[4]; 392 int error; 393 394 error = raydium_i2c_read(client, RM_CMD_BOOT_READ, buf, sizeof(buf)); 395 if (!error) { 396 if (buf[0] == bl_ack) 397 ts->boot_mode = RAYDIUM_TS_BLDR; 398 else if (buf[0] == main_ack) 399 ts->boot_mode = RAYDIUM_TS_MAIN; 400 return 0; 401 } 402 403 return error; 404 } 405 406 static int raydium_i2c_initialize(struct raydium_data *ts) 407 { 408 struct i2c_client *client = ts->client; 409 int error, retry_cnt; 410 411 for (retry_cnt = 0; retry_cnt < RM_MAX_RETRIES; retry_cnt++) { 412 /* Wait for Hello packet */ 413 msleep(RM_BOOT_DELAY_MS); 414 415 error = raydium_i2c_check_fw_status(ts); 416 if (error) { 417 dev_err(&client->dev, 418 "failed to read 'hello' packet: %d\n", error); 419 continue; 420 } 421 422 if (ts->boot_mode == RAYDIUM_TS_BLDR || 423 ts->boot_mode == RAYDIUM_TS_MAIN) { 424 break; 425 } 426 } 427 428 if (error) 429 ts->boot_mode = RAYDIUM_TS_BLDR; 430 431 if (ts->boot_mode == RAYDIUM_TS_BLDR) 432 raydium_i2c_query_ts_bootloader_info(ts); 433 else 434 raydium_i2c_query_ts_info(ts); 435 436 return error; 437 } 438 439 static int raydium_i2c_bl_chk_state(struct i2c_client *client, 440 enum raydium_bl_ack state) 441 { 442 static const u8 ack_ok[] = { 0xFF, 0x39, 0x30, 0x30, 0x54 }; 443 u8 rbuf[sizeof(ack_ok)]; 444 u8 retry; 445 int error; 446 447 for (retry = 0; retry < RM_MAX_FW_RETRIES; retry++) { 448 switch (state) { 449 case RAYDIUM_ACK_NULL: 450 return 0; 451 452 case RAYDIUM_WAIT_READY: 453 error = raydium_i2c_read(client, RM_CMD_BOOT_CHK, 454 &rbuf[0], 1); 455 if (!error && rbuf[0] == RM_BOOT_RDY) 456 return 0; 457 458 break; 459 460 case RAYDIUM_PATH_READY: 461 error = raydium_i2c_read(client, RM_CMD_BOOT_CHK, 462 rbuf, sizeof(rbuf)); 463 if (!error && !memcmp(rbuf, ack_ok, sizeof(ack_ok))) 464 return 0; 465 466 break; 467 468 default: 469 dev_err(&client->dev, "%s: invalid target state %d\n", 470 __func__, state); 471 return -EINVAL; 472 } 473 474 msleep(20); 475 } 476 477 return -ETIMEDOUT; 478 } 479 480 static int raydium_i2c_write_object(struct i2c_client *client, 481 const void *data, size_t len, 482 enum raydium_bl_ack state) 483 { 484 int error; 485 static const u8 cmd[] = { 0xFF, 0x39 }; 486 487 error = raydium_i2c_send(client, RM_CMD_BOOT_WRT, data, len); 488 if (error) { 489 dev_err(&client->dev, "WRT obj command failed: %d\n", 490 error); 491 return error; 492 } 493 494 error = raydium_i2c_send(client, RM_CMD_BOOT_ACK, cmd, sizeof(cmd)); 495 if (error) { 496 dev_err(&client->dev, "Ack obj command failed: %d\n", error); 497 return error; 498 } 499 500 error = raydium_i2c_bl_chk_state(client, state); 501 if (error) { 502 dev_err(&client->dev, "BL check state failed: %d\n", error); 503 return error; 504 } 505 return 0; 506 } 507 508 static int raydium_i2c_boot_trigger(struct i2c_client *client) 509 { 510 static const u8 cmd[7][6] = { 511 { 0x08, 0x0C, 0x09, 0x00, 0x50, 0xD7 }, 512 { 0x08, 0x04, 0x09, 0x00, 0x50, 0xA5 }, 513 { 0x08, 0x04, 0x09, 0x00, 0x50, 0x00 }, 514 { 0x08, 0x04, 0x09, 0x00, 0x50, 0xA5 }, 515 { 0x08, 0x0C, 0x09, 0x00, 0x50, 0x00 }, 516 { 0x06, 0x01, 0x00, 0x00, 0x00, 0x00 }, 517 { 0x02, 0xA2, 0x00, 0x00, 0x00, 0x00 }, 518 }; 519 int i; 520 int error; 521 522 for (i = 0; i < 7; i++) { 523 error = raydium_i2c_write_object(client, cmd[i], sizeof(cmd[i]), 524 RAYDIUM_WAIT_READY); 525 if (error) { 526 dev_err(&client->dev, 527 "boot trigger failed at step %d: %d\n", 528 i, error); 529 return error; 530 } 531 } 532 533 return 0; 534 } 535 536 static int raydium_i2c_fw_trigger(struct i2c_client *client) 537 { 538 static const u8 cmd[5][11] = { 539 { 0, 0x09, 0x71, 0x0C, 0x09, 0x00, 0x50, 0xD7, 0, 0, 0 }, 540 { 0, 0x09, 0x71, 0x04, 0x09, 0x00, 0x50, 0xA5, 0, 0, 0 }, 541 { 0, 0x09, 0x71, 0x04, 0x09, 0x00, 0x50, 0x00, 0, 0, 0 }, 542 { 0, 0x09, 0x71, 0x04, 0x09, 0x00, 0x50, 0xA5, 0, 0, 0 }, 543 { 0, 0x09, 0x71, 0x0C, 0x09, 0x00, 0x50, 0x00, 0, 0, 0 }, 544 }; 545 int i; 546 int error; 547 548 for (i = 0; i < 5; i++) { 549 error = raydium_i2c_write_object(client, cmd[i], sizeof(cmd[i]), 550 RAYDIUM_ACK_NULL); 551 if (error) { 552 dev_err(&client->dev, 553 "fw trigger failed at step %d: %d\n", 554 i, error); 555 return error; 556 } 557 } 558 559 return 0; 560 } 561 562 static int raydium_i2c_check_path(struct i2c_client *client) 563 { 564 static const u8 cmd[] = { 0x09, 0x00, 0x09, 0x00, 0x50, 0x10, 0x00 }; 565 int error; 566 567 error = raydium_i2c_write_object(client, cmd, sizeof(cmd), 568 RAYDIUM_PATH_READY); 569 if (error) { 570 dev_err(&client->dev, "check path command failed: %d\n", error); 571 return error; 572 } 573 574 return 0; 575 } 576 577 static int raydium_i2c_enter_bl(struct i2c_client *client) 578 { 579 static const u8 cal_cmd[] = { 0x00, 0x01, 0x52 }; 580 int error; 581 582 error = raydium_i2c_write_object(client, cal_cmd, sizeof(cal_cmd), 583 RAYDIUM_ACK_NULL); 584 if (error) { 585 dev_err(&client->dev, "enter bl command failed: %d\n", error); 586 return error; 587 } 588 589 msleep(RM_BOOT_DELAY_MS); 590 return 0; 591 } 592 593 static int raydium_i2c_leave_bl(struct i2c_client *client) 594 { 595 static const u8 leave_cmd[] = { 0x05, 0x00 }; 596 int error; 597 598 error = raydium_i2c_write_object(client, leave_cmd, sizeof(leave_cmd), 599 RAYDIUM_ACK_NULL); 600 if (error) { 601 dev_err(&client->dev, "leave bl command failed: %d\n", error); 602 return error; 603 } 604 605 msleep(RM_BOOT_DELAY_MS); 606 return 0; 607 } 608 609 static int raydium_i2c_write_checksum(struct i2c_client *client, 610 size_t length, u16 checksum) 611 { 612 u8 checksum_cmd[] = { 0x00, 0x05, 0x6D, 0x00, 0x00, 0x00, 0x00 }; 613 int error; 614 615 put_unaligned_le16(length, &checksum_cmd[3]); 616 put_unaligned_le16(checksum, &checksum_cmd[5]); 617 618 error = raydium_i2c_write_object(client, 619 checksum_cmd, sizeof(checksum_cmd), 620 RAYDIUM_ACK_NULL); 621 if (error) { 622 dev_err(&client->dev, "failed to write checksum: %d\n", 623 error); 624 return error; 625 } 626 627 return 0; 628 } 629 630 static int raydium_i2c_disable_watch_dog(struct i2c_client *client) 631 { 632 static const u8 cmd[] = { 0x0A, 0xAA }; 633 int error; 634 635 error = raydium_i2c_write_object(client, cmd, sizeof(cmd), 636 RAYDIUM_WAIT_READY); 637 if (error) { 638 dev_err(&client->dev, "disable watchdog command failed: %d\n", 639 error); 640 return error; 641 } 642 643 return 0; 644 } 645 646 static int raydium_i2c_fw_write_page(struct i2c_client *client, 647 u16 page_idx, const void *data, size_t len) 648 { 649 u8 buf[RM_BL_WRT_LEN]; 650 size_t xfer_len; 651 int error; 652 int i; 653 654 BUILD_BUG_ON((RM_FW_PAGE_SIZE % RM_BL_WRT_PKG_SIZE) != 0); 655 656 for (i = 0; i < RM_FW_PAGE_SIZE / RM_BL_WRT_PKG_SIZE; i++) { 657 buf[BL_HEADER] = RM_CMD_BOOT_PAGE_WRT; 658 buf[BL_PAGE_STR] = page_idx ? 0xff : 0; 659 buf[BL_PKG_IDX] = i + 1; 660 661 xfer_len = min_t(size_t, len, RM_BL_WRT_PKG_SIZE); 662 memcpy(&buf[BL_DATA_STR], data, xfer_len); 663 if (len < RM_BL_WRT_PKG_SIZE) 664 memset(&buf[BL_DATA_STR + xfer_len], 0xff, 665 RM_BL_WRT_PKG_SIZE - xfer_len); 666 667 error = raydium_i2c_write_object(client, buf, RM_BL_WRT_LEN, 668 RAYDIUM_WAIT_READY); 669 if (error) { 670 dev_err(&client->dev, 671 "page write command failed for page %d, chunk %d: %d\n", 672 page_idx, i, error); 673 return error; 674 } 675 676 data += xfer_len; 677 len -= xfer_len; 678 } 679 680 return error; 681 } 682 683 static u16 raydium_calc_chksum(const u8 *buf, u16 len) 684 { 685 u16 checksum = 0; 686 u16 i; 687 688 for (i = 0; i < len; i++) 689 checksum += buf[i]; 690 691 return checksum; 692 } 693 694 static int raydium_i2c_do_update_firmware(struct raydium_data *ts, 695 const struct firmware *fw) 696 { 697 struct i2c_client *client = ts->client; 698 const void *data; 699 size_t data_len; 700 size_t len; 701 int page_nr; 702 int i; 703 int error; 704 u16 fw_checksum; 705 706 if (fw->size == 0 || fw->size > RM_MAX_FW_SIZE) { 707 dev_err(&client->dev, "Invalid firmware length\n"); 708 return -EINVAL; 709 } 710 711 error = raydium_i2c_check_fw_status(ts); 712 if (error) { 713 dev_err(&client->dev, "Unable to access IC %d\n", error); 714 return error; 715 } 716 717 if (ts->boot_mode == RAYDIUM_TS_MAIN) { 718 for (i = 0; i < RM_MAX_RETRIES; i++) { 719 error = raydium_i2c_enter_bl(client); 720 if (!error) { 721 error = raydium_i2c_check_fw_status(ts); 722 if (error) { 723 dev_err(&client->dev, 724 "unable to access IC: %d\n", 725 error); 726 return error; 727 } 728 729 if (ts->boot_mode == RAYDIUM_TS_BLDR) 730 break; 731 } 732 } 733 734 if (ts->boot_mode == RAYDIUM_TS_MAIN) { 735 dev_err(&client->dev, 736 "failed to jump to boot loader: %d\n", 737 error); 738 return -EIO; 739 } 740 } 741 742 error = raydium_i2c_disable_watch_dog(client); 743 if (error) 744 return error; 745 746 error = raydium_i2c_check_path(client); 747 if (error) 748 return error; 749 750 error = raydium_i2c_boot_trigger(client); 751 if (error) { 752 dev_err(&client->dev, "send boot trigger fail: %d\n", error); 753 return error; 754 } 755 756 msleep(RM_BOOT_DELAY_MS); 757 758 data = fw->data; 759 data_len = fw->size; 760 page_nr = 0; 761 762 while (data_len) { 763 len = min_t(size_t, data_len, RM_FW_PAGE_SIZE); 764 765 error = raydium_i2c_fw_write_page(client, page_nr++, data, len); 766 if (error) 767 return error; 768 769 msleep(20); 770 771 data += len; 772 data_len -= len; 773 } 774 775 error = raydium_i2c_leave_bl(client); 776 if (error) { 777 dev_err(&client->dev, 778 "failed to leave boot loader: %d\n", error); 779 return error; 780 } 781 782 dev_dbg(&client->dev, "left boot loader mode\n"); 783 msleep(RM_BOOT_DELAY_MS); 784 785 error = raydium_i2c_check_fw_status(ts); 786 if (error) { 787 dev_err(&client->dev, 788 "failed to check fw status after write: %d\n", 789 error); 790 return error; 791 } 792 793 if (ts->boot_mode != RAYDIUM_TS_MAIN) { 794 dev_err(&client->dev, 795 "failed to switch to main fw after writing firmware: %d\n", 796 error); 797 return -EINVAL; 798 } 799 800 error = raydium_i2c_fw_trigger(client); 801 if (error) { 802 dev_err(&client->dev, "failed to trigger fw: %d\n", error); 803 return error; 804 } 805 806 fw_checksum = raydium_calc_chksum(fw->data, fw->size); 807 808 error = raydium_i2c_write_checksum(client, fw->size, fw_checksum); 809 if (error) 810 return error; 811 812 return 0; 813 } 814 815 static int raydium_i2c_fw_update(struct raydium_data *ts) 816 { 817 struct i2c_client *client = ts->client; 818 const struct firmware *fw = NULL; 819 char *fw_file; 820 int error; 821 822 fw_file = kasprintf(GFP_KERNEL, "raydium_%#04x.fw", 823 le32_to_cpu(ts->info.hw_ver)); 824 if (!fw_file) 825 return -ENOMEM; 826 827 dev_dbg(&client->dev, "firmware name: %s\n", fw_file); 828 829 error = request_firmware(&fw, fw_file, &client->dev); 830 if (error) { 831 dev_err(&client->dev, "Unable to open firmware %s\n", fw_file); 832 goto out_free_fw_file; 833 } 834 835 disable_irq(client->irq); 836 837 error = raydium_i2c_do_update_firmware(ts, fw); 838 if (error) { 839 dev_err(&client->dev, "firmware update failed: %d\n", error); 840 ts->boot_mode = RAYDIUM_TS_BLDR; 841 goto out_enable_irq; 842 } 843 844 error = raydium_i2c_initialize(ts); 845 if (error) { 846 dev_err(&client->dev, 847 "failed to initialize device after firmware update: %d\n", 848 error); 849 ts->boot_mode = RAYDIUM_TS_BLDR; 850 goto out_enable_irq; 851 } 852 853 ts->boot_mode = RAYDIUM_TS_MAIN; 854 855 out_enable_irq: 856 enable_irq(client->irq); 857 msleep(100); 858 859 release_firmware(fw); 860 861 out_free_fw_file: 862 kfree(fw_file); 863 864 return error; 865 } 866 867 static void raydium_mt_event(struct raydium_data *ts) 868 { 869 int i; 870 871 for (i = 0; i < ts->report_size / ts->contact_size; i++) { 872 u8 *contact = &ts->report_data[ts->contact_size * i]; 873 bool state = contact[RM_CONTACT_STATE_POS]; 874 u8 wx, wy; 875 876 input_mt_slot(ts->input, i); 877 input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, state); 878 879 if (!state) 880 continue; 881 882 input_report_abs(ts->input, ABS_MT_POSITION_X, 883 get_unaligned_le16(&contact[RM_CONTACT_X_POS])); 884 input_report_abs(ts->input, ABS_MT_POSITION_Y, 885 get_unaligned_le16(&contact[RM_CONTACT_Y_POS])); 886 input_report_abs(ts->input, ABS_MT_PRESSURE, 887 contact[RM_CONTACT_PRESSURE_POS]); 888 889 wx = contact[RM_CONTACT_WIDTH_X_POS]; 890 wy = contact[RM_CONTACT_WIDTH_Y_POS]; 891 892 input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR, max(wx, wy)); 893 input_report_abs(ts->input, ABS_MT_TOUCH_MINOR, min(wx, wy)); 894 } 895 896 input_mt_sync_frame(ts->input); 897 input_sync(ts->input); 898 } 899 900 static irqreturn_t raydium_i2c_irq(int irq, void *_dev) 901 { 902 struct raydium_data *ts = _dev; 903 int error; 904 u16 fw_crc; 905 u16 calc_crc; 906 907 if (ts->boot_mode != RAYDIUM_TS_MAIN) 908 goto out; 909 910 error = raydium_i2c_read(ts->client, ts->data_bank_addr, 911 ts->report_data, ts->pkg_size); 912 if (error) 913 goto out; 914 915 fw_crc = get_unaligned_le16(&ts->report_data[ts->report_size]); 916 calc_crc = raydium_calc_chksum(ts->report_data, ts->report_size); 917 if (unlikely(fw_crc != calc_crc)) { 918 dev_warn(&ts->client->dev, 919 "%s: invalid packet crc %#04x vs %#04x\n", 920 __func__, calc_crc, fw_crc); 921 goto out; 922 } 923 924 raydium_mt_event(ts); 925 926 out: 927 return IRQ_HANDLED; 928 } 929 930 static ssize_t raydium_i2c_fw_ver_show(struct device *dev, 931 struct device_attribute *attr, char *buf) 932 { 933 struct i2c_client *client = to_i2c_client(dev); 934 struct raydium_data *ts = i2c_get_clientdata(client); 935 936 return sprintf(buf, "%d.%d\n", ts->info.main_ver, ts->info.sub_ver); 937 } 938 939 static ssize_t raydium_i2c_hw_ver_show(struct device *dev, 940 struct device_attribute *attr, char *buf) 941 { 942 struct i2c_client *client = to_i2c_client(dev); 943 struct raydium_data *ts = i2c_get_clientdata(client); 944 945 return sprintf(buf, "%#04x\n", le32_to_cpu(ts->info.hw_ver)); 946 } 947 948 static ssize_t raydium_i2c_boot_mode_show(struct device *dev, 949 struct device_attribute *attr, 950 char *buf) 951 { 952 struct i2c_client *client = to_i2c_client(dev); 953 struct raydium_data *ts = i2c_get_clientdata(client); 954 955 return sprintf(buf, "%s\n", 956 ts->boot_mode == RAYDIUM_TS_MAIN ? 957 "Normal" : "Recovery"); 958 } 959 960 static ssize_t raydium_i2c_update_fw_store(struct device *dev, 961 struct device_attribute *attr, 962 const char *buf, size_t count) 963 { 964 struct i2c_client *client = to_i2c_client(dev); 965 struct raydium_data *ts = i2c_get_clientdata(client); 966 int error; 967 968 error = mutex_lock_interruptible(&ts->sysfs_mutex); 969 if (error) 970 return error; 971 972 error = raydium_i2c_fw_update(ts); 973 974 mutex_unlock(&ts->sysfs_mutex); 975 976 return error ?: count; 977 } 978 979 static ssize_t raydium_i2c_calibrate_store(struct device *dev, 980 struct device_attribute *attr, 981 const char *buf, size_t count) 982 { 983 struct i2c_client *client = to_i2c_client(dev); 984 struct raydium_data *ts = i2c_get_clientdata(client); 985 static const u8 cal_cmd[] = { 0x00, 0x01, 0x9E }; 986 int error; 987 988 error = mutex_lock_interruptible(&ts->sysfs_mutex); 989 if (error) 990 return error; 991 992 error = raydium_i2c_write_object(client, cal_cmd, sizeof(cal_cmd), 993 RAYDIUM_WAIT_READY); 994 if (error) 995 dev_err(&client->dev, "calibrate command failed: %d\n", error); 996 997 mutex_unlock(&ts->sysfs_mutex); 998 return error ?: count; 999 } 1000 1001 static DEVICE_ATTR(fw_version, S_IRUGO, raydium_i2c_fw_ver_show, NULL); 1002 static DEVICE_ATTR(hw_version, S_IRUGO, raydium_i2c_hw_ver_show, NULL); 1003 static DEVICE_ATTR(boot_mode, S_IRUGO, raydium_i2c_boot_mode_show, NULL); 1004 static DEVICE_ATTR(update_fw, S_IWUSR, NULL, raydium_i2c_update_fw_store); 1005 static DEVICE_ATTR(calibrate, S_IWUSR, NULL, raydium_i2c_calibrate_store); 1006 1007 static struct attribute *raydium_i2c_attrs[] = { 1008 &dev_attr_update_fw.attr, 1009 &dev_attr_boot_mode.attr, 1010 &dev_attr_fw_version.attr, 1011 &dev_attr_hw_version.attr, 1012 &dev_attr_calibrate.attr, 1013 NULL 1014 }; 1015 ATTRIBUTE_GROUPS(raydium_i2c); 1016 1017 static int raydium_i2c_power_on(struct raydium_data *ts) 1018 { 1019 int error; 1020 1021 if (!ts->reset_gpio) 1022 return 0; 1023 1024 gpiod_set_value_cansleep(ts->reset_gpio, 1); 1025 1026 error = regulator_enable(ts->avdd); 1027 if (error) { 1028 dev_err(&ts->client->dev, 1029 "failed to enable avdd regulator: %d\n", error); 1030 goto release_reset_gpio; 1031 } 1032 1033 error = regulator_enable(ts->vccio); 1034 if (error) { 1035 regulator_disable(ts->avdd); 1036 dev_err(&ts->client->dev, 1037 "failed to enable vccio regulator: %d\n", error); 1038 goto release_reset_gpio; 1039 } 1040 1041 udelay(RM_POWERON_DELAY_USEC); 1042 1043 release_reset_gpio: 1044 gpiod_set_value_cansleep(ts->reset_gpio, 0); 1045 1046 if (error) 1047 return error; 1048 1049 msleep(RM_RESET_DELAY_MSEC); 1050 1051 return 0; 1052 } 1053 1054 static void raydium_i2c_power_off(void *_data) 1055 { 1056 struct raydium_data *ts = _data; 1057 1058 if (ts->reset_gpio) { 1059 gpiod_set_value_cansleep(ts->reset_gpio, 1); 1060 regulator_disable(ts->vccio); 1061 regulator_disable(ts->avdd); 1062 } 1063 } 1064 1065 static int raydium_i2c_probe(struct i2c_client *client) 1066 { 1067 union i2c_smbus_data dummy; 1068 struct raydium_data *ts; 1069 int error; 1070 1071 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { 1072 dev_err(&client->dev, 1073 "i2c check functionality error (need I2C_FUNC_I2C)\n"); 1074 return -ENXIO; 1075 } 1076 1077 ts = devm_kzalloc(&client->dev, sizeof(*ts), GFP_KERNEL); 1078 if (!ts) 1079 return -ENOMEM; 1080 1081 mutex_init(&ts->sysfs_mutex); 1082 1083 ts->client = client; 1084 i2c_set_clientdata(client, ts); 1085 1086 ts->avdd = devm_regulator_get(&client->dev, "avdd"); 1087 if (IS_ERR(ts->avdd)) 1088 return dev_err_probe(&client->dev, PTR_ERR(ts->avdd), 1089 "Failed to get 'avdd' regulator\n"); 1090 1091 ts->vccio = devm_regulator_get(&client->dev, "vccio"); 1092 if (IS_ERR(ts->vccio)) 1093 return dev_err_probe(&client->dev, PTR_ERR(ts->vccio), 1094 "Failed to get 'vccio' regulator\n"); 1095 1096 ts->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset", 1097 GPIOD_OUT_LOW); 1098 if (IS_ERR(ts->reset_gpio)) 1099 return dev_err_probe(&client->dev, PTR_ERR(ts->reset_gpio), 1100 "Failed to get reset gpio\n"); 1101 1102 error = raydium_i2c_power_on(ts); 1103 if (error) 1104 return error; 1105 1106 error = devm_add_action_or_reset(&client->dev, 1107 raydium_i2c_power_off, ts); 1108 if (error) { 1109 dev_err(&client->dev, 1110 "failed to install power off action: %d\n", error); 1111 return error; 1112 } 1113 1114 /* Make sure there is something at this address */ 1115 if (i2c_smbus_xfer(client->adapter, client->addr, 0, 1116 I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE, &dummy) < 0) { 1117 dev_err(&client->dev, "nothing at this address\n"); 1118 return -ENXIO; 1119 } 1120 1121 error = raydium_i2c_initialize(ts); 1122 if (error) { 1123 dev_err(&client->dev, "failed to initialize: %d\n", error); 1124 return error; 1125 } 1126 1127 ts->report_data = devm_kmalloc(&client->dev, 1128 ts->pkg_size, GFP_KERNEL); 1129 if (!ts->report_data) 1130 return -ENOMEM; 1131 1132 ts->input = devm_input_allocate_device(&client->dev); 1133 if (!ts->input) { 1134 dev_err(&client->dev, "Failed to allocate input device\n"); 1135 return -ENOMEM; 1136 } 1137 1138 ts->input->name = "Raydium Touchscreen"; 1139 ts->input->id.bustype = BUS_I2C; 1140 1141 input_set_abs_params(ts->input, ABS_MT_POSITION_X, 1142 0, le16_to_cpu(ts->info.x_max), 0, 0); 1143 input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 1144 0, le16_to_cpu(ts->info.y_max), 0, 0); 1145 input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->info.x_res); 1146 input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->info.y_res); 1147 1148 input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); 1149 input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0, 0); 1150 1151 error = input_mt_init_slots(ts->input, RM_MAX_TOUCH_NUM, 1152 INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); 1153 if (error) { 1154 dev_err(&client->dev, 1155 "failed to initialize MT slots: %d\n", error); 1156 return error; 1157 } 1158 1159 error = input_register_device(ts->input); 1160 if (error) { 1161 dev_err(&client->dev, 1162 "unable to register input device: %d\n", error); 1163 return error; 1164 } 1165 1166 error = devm_request_threaded_irq(&client->dev, client->irq, 1167 NULL, raydium_i2c_irq, 1168 IRQF_ONESHOT, client->name, ts); 1169 if (error) { 1170 dev_err(&client->dev, "Failed to register interrupt\n"); 1171 return error; 1172 } 1173 1174 return 0; 1175 } 1176 1177 static void raydium_enter_sleep(struct i2c_client *client) 1178 { 1179 static const u8 sleep_cmd[] = { 0x5A, 0xff, 0x00, 0x0f }; 1180 int error; 1181 1182 error = raydium_i2c_send(client, RM_CMD_ENTER_SLEEP, 1183 sleep_cmd, sizeof(sleep_cmd)); 1184 if (error) 1185 dev_err(&client->dev, 1186 "sleep command failed: %d\n", error); 1187 } 1188 1189 static int raydium_i2c_suspend(struct device *dev) 1190 { 1191 struct i2c_client *client = to_i2c_client(dev); 1192 struct raydium_data *ts = i2c_get_clientdata(client); 1193 1194 /* Sleep is not available in BLDR recovery mode */ 1195 if (ts->boot_mode != RAYDIUM_TS_MAIN) 1196 return -EBUSY; 1197 1198 disable_irq(client->irq); 1199 1200 if (device_may_wakeup(dev)) { 1201 raydium_enter_sleep(client); 1202 } else { 1203 raydium_i2c_power_off(ts); 1204 } 1205 1206 return 0; 1207 } 1208 1209 static int raydium_i2c_resume(struct device *dev) 1210 { 1211 struct i2c_client *client = to_i2c_client(dev); 1212 struct raydium_data *ts = i2c_get_clientdata(client); 1213 1214 if (device_may_wakeup(dev)) { 1215 raydium_i2c_sw_reset(client); 1216 } else { 1217 raydium_i2c_power_on(ts); 1218 raydium_i2c_initialize(ts); 1219 } 1220 1221 enable_irq(client->irq); 1222 1223 return 0; 1224 } 1225 1226 static DEFINE_SIMPLE_DEV_PM_OPS(raydium_i2c_pm_ops, 1227 raydium_i2c_suspend, raydium_i2c_resume); 1228 1229 static const struct i2c_device_id raydium_i2c_id[] = { 1230 { "raydium_i2c" }, 1231 { "rm32380" }, 1232 { /* sentinel */ } 1233 }; 1234 MODULE_DEVICE_TABLE(i2c, raydium_i2c_id); 1235 1236 #ifdef CONFIG_ACPI 1237 static const struct acpi_device_id raydium_acpi_id[] = { 1238 { "RAYD0001", 0 }, 1239 { /* sentinel */ } 1240 }; 1241 MODULE_DEVICE_TABLE(acpi, raydium_acpi_id); 1242 #endif 1243 1244 #ifdef CONFIG_OF 1245 static const struct of_device_id raydium_of_match[] = { 1246 { .compatible = "raydium,rm32380", }, 1247 { /* sentinel */ } 1248 }; 1249 MODULE_DEVICE_TABLE(of, raydium_of_match); 1250 #endif 1251 1252 static struct i2c_driver raydium_i2c_driver = { 1253 .probe = raydium_i2c_probe, 1254 .id_table = raydium_i2c_id, 1255 .driver = { 1256 .name = "raydium_ts", 1257 .dev_groups = raydium_i2c_groups, 1258 .pm = pm_sleep_ptr(&raydium_i2c_pm_ops), 1259 .acpi_match_table = ACPI_PTR(raydium_acpi_id), 1260 .of_match_table = of_match_ptr(raydium_of_match), 1261 }, 1262 }; 1263 module_i2c_driver(raydium_i2c_driver); 1264 1265 MODULE_AUTHOR("Raydium"); 1266 MODULE_DESCRIPTION("Raydium I2c Touchscreen driver"); 1267 MODULE_LICENSE("GPL v2"); 1268