1 /* 2 * mainstone-wm97xx.c -- Mainstone Continuous Touch screen driver for 3 * Wolfson WM97xx AC97 Codecs. 4 * 5 * Copyright 2004, 2007 Wolfson Microelectronics PLC. 6 * Author: Liam Girdwood 7 * liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com 8 * Parts Copyright : Ian Molton <spyro@f2s.com> 9 * Andrew Zabolotny <zap@homelink.ru> 10 * 11 * This program is free software; you can redistribute it and/or modify it 12 * under the terms of the GNU General Public License as published by the 13 * Free Software Foundation; either version 2 of the License, or (at your 14 * option) any later version. 15 * 16 * Notes: 17 * This is a wm97xx extended touch driver to capture touch 18 * data in a continuous manner on the Intel XScale archictecture 19 * 20 * Features: 21 * - codecs supported:- WM9705, WM9712, WM9713 22 * - processors supported:- Intel XScale PXA25x, PXA26x, PXA27x 23 * 24 */ 25 26 #include <linux/module.h> 27 #include <linux/moduleparam.h> 28 #include <linux/version.h> 29 #include <linux/kernel.h> 30 #include <linux/init.h> 31 #include <linux/delay.h> 32 #include <linux/irq.h> 33 #include <linux/interrupt.h> 34 #include <linux/wm97xx.h> 35 #include <linux/io.h> 36 #include <mach/pxa-regs.h> 37 38 #define VERSION "0.13" 39 40 struct continuous { 41 u16 id; /* codec id */ 42 u8 code; /* continuous code */ 43 u8 reads; /* number of coord reads per read cycle */ 44 u32 speed; /* number of coords per second */ 45 }; 46 47 #define WM_READS(sp) ((sp / HZ) + 1) 48 49 static const struct continuous cinfo[] = { 50 {WM9705_ID2, 0, WM_READS(94), 94}, 51 {WM9705_ID2, 1, WM_READS(188), 188}, 52 {WM9705_ID2, 2, WM_READS(375), 375}, 53 {WM9705_ID2, 3, WM_READS(750), 750}, 54 {WM9712_ID2, 0, WM_READS(94), 94}, 55 {WM9712_ID2, 1, WM_READS(188), 188}, 56 {WM9712_ID2, 2, WM_READS(375), 375}, 57 {WM9712_ID2, 3, WM_READS(750), 750}, 58 {WM9713_ID2, 0, WM_READS(94), 94}, 59 {WM9713_ID2, 1, WM_READS(120), 120}, 60 {WM9713_ID2, 2, WM_READS(154), 154}, 61 {WM9713_ID2, 3, WM_READS(188), 188}, 62 }; 63 64 /* continuous speed index */ 65 static int sp_idx; 66 static u16 last, tries; 67 68 /* 69 * Pen sampling frequency (Hz) in continuous mode. 70 */ 71 static int cont_rate = 200; 72 module_param(cont_rate, int, 0); 73 MODULE_PARM_DESC(cont_rate, "Sampling rate in continuous mode (Hz)"); 74 75 /* 76 * Pen down detection. 77 * 78 * This driver can either poll or use an interrupt to indicate a pen down 79 * event. If the irq request fails then it will fall back to polling mode. 80 */ 81 static int pen_int; 82 module_param(pen_int, int, 0); 83 MODULE_PARM_DESC(pen_int, "Pen down detection (1 = interrupt, 0 = polling)"); 84 85 /* 86 * Pressure readback. 87 * 88 * Set to 1 to read back pen down pressure 89 */ 90 static int pressure; 91 module_param(pressure, int, 0); 92 MODULE_PARM_DESC(pressure, "Pressure readback (1 = pressure, 0 = no pressure)"); 93 94 /* 95 * AC97 touch data slot. 96 * 97 * Touch screen readback data ac97 slot 98 */ 99 static int ac97_touch_slot = 5; 100 module_param(ac97_touch_slot, int, 0); 101 MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number"); 102 103 104 /* flush AC97 slot 5 FIFO on pxa machines */ 105 #ifdef CONFIG_PXA27x 106 static void wm97xx_acc_pen_up(struct wm97xx *wm) 107 { 108 schedule_timeout_uninterruptible(1); 109 110 while (MISR & (1 << 2)) 111 MODR; 112 } 113 #else 114 static void wm97xx_acc_pen_up(struct wm97xx *wm) 115 { 116 int count = 16; 117 schedule_timeout_uninterruptible(1); 118 119 while (count < 16) { 120 MODR; 121 count--; 122 } 123 } 124 #endif 125 126 static int wm97xx_acc_pen_down(struct wm97xx *wm) 127 { 128 u16 x, y, p = 0x100 | WM97XX_ADCSEL_PRES; 129 int reads = 0; 130 131 /* When the AC97 queue has been drained we need to allow time 132 * to buffer up samples otherwise we end up spinning polling 133 * for samples. The controller can't have a suitably low 134 * threashold set to use the notifications it gives. 135 */ 136 schedule_timeout_uninterruptible(1); 137 138 if (tries > 5) { 139 tries = 0; 140 return RC_PENUP; 141 } 142 143 x = MODR; 144 if (x == last) { 145 tries++; 146 return RC_AGAIN; 147 } 148 last = x; 149 do { 150 if (reads) 151 x = MODR; 152 y = MODR; 153 if (pressure) 154 p = MODR; 155 156 /* are samples valid */ 157 if ((x & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_X || 158 (y & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_Y || 159 (p & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_PRES) 160 goto up; 161 162 /* coordinate is good */ 163 tries = 0; 164 input_report_abs(wm->input_dev, ABS_X, x & 0xfff); 165 input_report_abs(wm->input_dev, ABS_Y, y & 0xfff); 166 input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff); 167 input_sync(wm->input_dev); 168 reads++; 169 } while (reads < cinfo[sp_idx].reads); 170 up: 171 return RC_PENDOWN | RC_AGAIN; 172 } 173 174 static int wm97xx_acc_startup(struct wm97xx *wm) 175 { 176 int idx = 0; 177 178 /* check we have a codec */ 179 if (wm->ac97 == NULL) 180 return -ENODEV; 181 182 /* Go you big red fire engine */ 183 for (idx = 0; idx < ARRAY_SIZE(cinfo); idx++) { 184 if (wm->id != cinfo[idx].id) 185 continue; 186 sp_idx = idx; 187 if (cont_rate <= cinfo[idx].speed) 188 break; 189 } 190 wm->acc_rate = cinfo[sp_idx].code; 191 wm->acc_slot = ac97_touch_slot; 192 dev_info(wm->dev, 193 "mainstone accelerated touchscreen driver, %d samples/sec\n", 194 cinfo[sp_idx].speed); 195 196 /* codec specific irq config */ 197 if (pen_int) { 198 switch (wm->id) { 199 case WM9705_ID2: 200 wm->pen_irq = IRQ_GPIO(4); 201 set_irq_type(IRQ_GPIO(4), IRQ_TYPE_EDGE_BOTH); 202 break; 203 case WM9712_ID2: 204 case WM9713_ID2: 205 /* enable pen down interrupt */ 206 /* use PEN_DOWN GPIO 13 to assert IRQ on GPIO line 2 */ 207 wm->pen_irq = MAINSTONE_AC97_IRQ; 208 wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN, 209 WM97XX_GPIO_POL_HIGH, 210 WM97XX_GPIO_STICKY, 211 WM97XX_GPIO_WAKE); 212 wm97xx_config_gpio(wm, WM97XX_GPIO_2, WM97XX_GPIO_OUT, 213 WM97XX_GPIO_POL_HIGH, 214 WM97XX_GPIO_NOTSTICKY, 215 WM97XX_GPIO_NOWAKE); 216 break; 217 default: 218 dev_err(wm->dev, 219 "pen down irq not supported on this device\n"); 220 pen_int = 0; 221 break; 222 } 223 } 224 225 return 0; 226 } 227 228 static void wm97xx_acc_shutdown(struct wm97xx *wm) 229 { 230 /* codec specific deconfig */ 231 if (pen_int) { 232 switch (wm->id & 0xffff) { 233 case WM9705_ID2: 234 wm->pen_irq = 0; 235 break; 236 case WM9712_ID2: 237 case WM9713_ID2: 238 /* disable interrupt */ 239 wm->pen_irq = 0; 240 break; 241 } 242 } 243 } 244 245 static void wm97xx_irq_enable(struct wm97xx *wm, int enable) 246 { 247 if (enable) 248 enable_irq(wm->pen_irq); 249 else 250 disable_irq(wm->pen_irq); 251 } 252 253 static struct wm97xx_mach_ops mainstone_mach_ops = { 254 .acc_enabled = 1, 255 .acc_pen_up = wm97xx_acc_pen_up, 256 .acc_pen_down = wm97xx_acc_pen_down, 257 .acc_startup = wm97xx_acc_startup, 258 .acc_shutdown = wm97xx_acc_shutdown, 259 .irq_enable = wm97xx_irq_enable, 260 .irq_gpio = WM97XX_GPIO_2, 261 }; 262 263 static int mainstone_wm97xx_probe(struct platform_device *pdev) 264 { 265 struct wm97xx *wm = platform_get_drvdata(pdev); 266 267 return wm97xx_register_mach_ops(wm, &mainstone_mach_ops); 268 } 269 270 static int mainstone_wm97xx_remove(struct platform_device *pdev) 271 { 272 struct wm97xx *wm = platform_get_drvdata(pdev); 273 274 wm97xx_unregister_mach_ops(wm); 275 return 0; 276 } 277 278 static struct platform_driver mainstone_wm97xx_driver = { 279 .probe = mainstone_wm97xx_probe, 280 .remove = mainstone_wm97xx_remove, 281 .driver = { 282 .name = "wm97xx-touch", 283 }, 284 }; 285 286 static int __init mainstone_wm97xx_init(void) 287 { 288 return platform_driver_register(&mainstone_wm97xx_driver); 289 } 290 291 static void __exit mainstone_wm97xx_exit(void) 292 { 293 platform_driver_unregister(&mainstone_wm97xx_driver); 294 } 295 296 module_init(mainstone_wm97xx_init); 297 module_exit(mainstone_wm97xx_exit); 298 299 /* Module information */ 300 MODULE_AUTHOR("Liam Girdwood <liam.girdwood@wolfsonmicro.com>"); 301 MODULE_DESCRIPTION("wm97xx continuous touch driver for mainstone"); 302 MODULE_LICENSE("GPL"); 303