1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Touch Screen driver for EETI's I2C connected touch screen panels 4 * Copyright (c) 2009,2018 Daniel Mack <daniel@zonque.org> 5 * 6 * See EETI's software guide for the protocol specification: 7 * http://home.eeti.com.tw/documentation.html 8 * 9 * Based on migor_ts.c 10 * Copyright (c) 2008 Magnus Damm 11 * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com> 12 */ 13 14 #include <linux/module.h> 15 #include <linux/kernel.h> 16 #include <linux/input.h> 17 #include <linux/input/touchscreen.h> 18 #include <linux/interrupt.h> 19 #include <linux/i2c.h> 20 #include <linux/timer.h> 21 #include <linux/gpio/consumer.h> 22 #include <linux/of.h> 23 #include <linux/slab.h> 24 #include <linux/unaligned.h> 25 26 struct eeti_ts { 27 struct i2c_client *client; 28 struct input_dev *input; 29 struct gpio_desc *attn_gpio; 30 struct touchscreen_properties props; 31 struct mutex mutex; 32 bool running; 33 }; 34 35 #define EETI_TS_BITDEPTH (11) 36 #define EETI_MAXVAL ((1 << (EETI_TS_BITDEPTH + 1)) - 1) 37 38 #define REPORT_BIT_PRESSED BIT(0) 39 #define REPORT_BIT_AD0 BIT(1) 40 #define REPORT_BIT_AD1 BIT(2) 41 #define REPORT_BIT_HAS_PRESSURE BIT(6) 42 #define REPORT_RES_BITS(v) (((v) >> 1) + EETI_TS_BITDEPTH) 43 44 static void eeti_ts_report_event(struct eeti_ts *eeti, u8 *buf) 45 { 46 unsigned int res; 47 u16 x, y; 48 49 res = REPORT_RES_BITS(buf[0] & (REPORT_BIT_AD0 | REPORT_BIT_AD1)); 50 51 x = get_unaligned_be16(&buf[1]); 52 y = get_unaligned_be16(&buf[3]); 53 54 /* fix the range to 11 bits */ 55 x >>= res - EETI_TS_BITDEPTH; 56 y >>= res - EETI_TS_BITDEPTH; 57 58 if (buf[0] & REPORT_BIT_HAS_PRESSURE) 59 input_report_abs(eeti->input, ABS_PRESSURE, buf[5]); 60 61 touchscreen_report_pos(eeti->input, &eeti->props, x, y, false); 62 input_report_key(eeti->input, BTN_TOUCH, buf[0] & REPORT_BIT_PRESSED); 63 input_sync(eeti->input); 64 } 65 66 static int eeti_ts_read(struct eeti_ts *eeti) 67 { 68 int len, error; 69 char buf[6]; 70 71 len = i2c_master_recv(eeti->client, buf, sizeof(buf)); 72 if (len != sizeof(buf)) { 73 error = len < 0 ? len : -EIO; 74 dev_err(&eeti->client->dev, 75 "failed to read touchscreen data: %d\n", 76 error); 77 return error; 78 } 79 80 /* Motion packet */ 81 if (buf[0] & 0x80) 82 eeti_ts_report_event(eeti, buf); 83 84 return 0; 85 } 86 87 static irqreturn_t eeti_ts_isr(int irq, void *dev_id) 88 { 89 struct eeti_ts *eeti = dev_id; 90 int error; 91 92 guard(mutex)(&eeti->mutex); 93 94 do { 95 /* 96 * If we have attention GPIO, trust it. Otherwise we'll read 97 * once and exit. We assume that in this case we are using 98 * level triggered interrupt and it will get raised again 99 * if/when there is more data. 100 */ 101 if (eeti->attn_gpio && 102 !gpiod_get_value_cansleep(eeti->attn_gpio)) { 103 break; 104 } 105 106 error = eeti_ts_read(eeti); 107 if (error) 108 break; 109 110 } while (eeti->running && eeti->attn_gpio); 111 112 return IRQ_HANDLED; 113 } 114 115 static void eeti_ts_start(struct eeti_ts *eeti) 116 { 117 guard(mutex)(&eeti->mutex); 118 119 eeti->running = true; 120 enable_irq(eeti->client->irq); 121 122 /* 123 * Kick the controller in case we are using edge interrupt and 124 * we missed our edge while interrupt was disabled. We expect 125 * the attention GPIO to be wired in this case. 126 */ 127 if (eeti->attn_gpio && gpiod_get_value_cansleep(eeti->attn_gpio)) 128 eeti_ts_read(eeti); 129 } 130 131 static void eeti_ts_stop(struct eeti_ts *eeti) 132 { 133 /* 134 * Not locking here, just setting a flag and expect that the 135 * interrupt thread will notice the flag eventually. 136 */ 137 eeti->running = false; 138 wmb(); 139 disable_irq(eeti->client->irq); 140 } 141 142 static int eeti_ts_open(struct input_dev *dev) 143 { 144 struct eeti_ts *eeti = input_get_drvdata(dev); 145 146 eeti_ts_start(eeti); 147 148 return 0; 149 } 150 151 static void eeti_ts_close(struct input_dev *dev) 152 { 153 struct eeti_ts *eeti = input_get_drvdata(dev); 154 155 eeti_ts_stop(eeti); 156 } 157 158 static int eeti_ts_probe(struct i2c_client *client) 159 { 160 struct device *dev = &client->dev; 161 struct eeti_ts *eeti; 162 struct input_dev *input; 163 int error; 164 165 /* 166 * In contrast to what's described in the datasheet, there seems 167 * to be no way of probing the presence of that device using I2C 168 * commands. So we need to blindly believe it is there, and wait 169 * for interrupts to occur. 170 */ 171 172 eeti = devm_kzalloc(dev, sizeof(*eeti), GFP_KERNEL); 173 if (!eeti) { 174 dev_err(dev, "failed to allocate driver data\n"); 175 return -ENOMEM; 176 } 177 178 mutex_init(&eeti->mutex); 179 180 input = devm_input_allocate_device(dev); 181 if (!input) { 182 dev_err(dev, "Failed to allocate input device.\n"); 183 return -ENOMEM; 184 } 185 186 input_set_capability(input, EV_KEY, BTN_TOUCH); 187 188 input_set_abs_params(input, ABS_X, 0, EETI_MAXVAL, 0, 0); 189 input_set_abs_params(input, ABS_Y, 0, EETI_MAXVAL, 0, 0); 190 input_set_abs_params(input, ABS_PRESSURE, 0, 0xff, 0, 0); 191 192 touchscreen_parse_properties(input, false, &eeti->props); 193 194 input->name = client->name; 195 input->id.bustype = BUS_I2C; 196 input->open = eeti_ts_open; 197 input->close = eeti_ts_close; 198 199 eeti->client = client; 200 eeti->input = input; 201 202 eeti->attn_gpio = devm_gpiod_get_optional(dev, "attn", GPIOD_IN); 203 if (IS_ERR(eeti->attn_gpio)) 204 return PTR_ERR(eeti->attn_gpio); 205 206 i2c_set_clientdata(client, eeti); 207 input_set_drvdata(input, eeti); 208 209 error = devm_request_threaded_irq(dev, client->irq, 210 NULL, eeti_ts_isr, 211 IRQF_ONESHOT, 212 client->name, eeti); 213 if (error) { 214 dev_err(dev, "Unable to request touchscreen IRQ: %d\n", 215 error); 216 return error; 217 } 218 219 /* 220 * Disable the device for now. It will be enabled once the 221 * input device is opened. 222 */ 223 eeti_ts_stop(eeti); 224 225 error = input_register_device(input); 226 if (error) 227 return error; 228 229 return 0; 230 } 231 232 static int eeti_ts_suspend(struct device *dev) 233 { 234 struct i2c_client *client = to_i2c_client(dev); 235 struct eeti_ts *eeti = i2c_get_clientdata(client); 236 struct input_dev *input_dev = eeti->input; 237 238 scoped_guard(mutex, &input_dev->mutex) { 239 if (input_device_enabled(input_dev)) 240 eeti_ts_stop(eeti); 241 } 242 243 if (device_may_wakeup(&client->dev)) 244 enable_irq_wake(client->irq); 245 246 return 0; 247 } 248 249 static int eeti_ts_resume(struct device *dev) 250 { 251 struct i2c_client *client = to_i2c_client(dev); 252 struct eeti_ts *eeti = i2c_get_clientdata(client); 253 struct input_dev *input_dev = eeti->input; 254 255 if (device_may_wakeup(&client->dev)) 256 disable_irq_wake(client->irq); 257 258 scoped_guard(mutex, &input_dev->mutex) { 259 if (input_device_enabled(input_dev)) 260 eeti_ts_start(eeti); 261 } 262 263 return 0; 264 } 265 266 static DEFINE_SIMPLE_DEV_PM_OPS(eeti_ts_pm, eeti_ts_suspend, eeti_ts_resume); 267 268 static const struct i2c_device_id eeti_ts_id[] = { 269 { "eeti_ts" }, 270 { } 271 }; 272 MODULE_DEVICE_TABLE(i2c, eeti_ts_id); 273 274 #ifdef CONFIG_OF 275 static const struct of_device_id of_eeti_ts_match[] = { 276 { .compatible = "eeti,exc3000-i2c", }, 277 { } 278 }; 279 #endif 280 281 static struct i2c_driver eeti_ts_driver = { 282 .driver = { 283 .name = "eeti_ts", 284 .pm = pm_sleep_ptr(&eeti_ts_pm), 285 .of_match_table = of_match_ptr(of_eeti_ts_match), 286 }, 287 .probe = eeti_ts_probe, 288 .id_table = eeti_ts_id, 289 }; 290 291 module_i2c_driver(eeti_ts_driver); 292 293 MODULE_DESCRIPTION("EETI Touchscreen driver"); 294 MODULE_AUTHOR("Daniel Mack <daniel@zonque.org>"); 295 MODULE_LICENSE("GPL"); 296