1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * ADS7846 based touchscreen and sensor driver
4 *
5 * Copyright (c) 2005 David Brownell
6 * Copyright (c) 2006 Nokia Corporation
7 * Various changes: Imre Deak <imre.deak@nokia.com>
8 *
9 * Using code from:
10 * - corgi_ts.c
11 * Copyright (C) 2004-2005 Richard Purdie
12 * - omap_ts.[hc], ads7846.h, ts_osk.c
13 * Copyright (C) 2002 MontaVista Software
14 * Copyright (C) 2004 Texas Instruments
15 * Copyright (C) 2005 Dirk Behme
16 */
17 #include <linux/types.h>
18 #include <linux/hwmon.h>
19 #include <linux/err.h>
20 #include <linux/sched.h>
21 #include <linux/delay.h>
22 #include <linux/input.h>
23 #include <linux/input/touchscreen.h>
24 #include <linux/interrupt.h>
25 #include <linux/slab.h>
26 #include <linux/pm.h>
27 #include <linux/property.h>
28 #include <linux/gpio/consumer.h>
29 #include <linux/spi/spi.h>
30 #include <linux/spi/ads7846.h>
31 #include <linux/regulator/consumer.h>
32 #include <linux/module.h>
33 #include <linux/unaligned.h>
34
35 /*
36 * This code has been heavily tested on a Nokia 770, and lightly
37 * tested on other ads7846 devices (OSK/Mistral, Lubbock, Spitz).
38 * TSC2046 is just newer ads7846 silicon.
39 * Support for ads7843 tested on Atmel at91sam926x-EK.
40 * Support for ads7845 has only been stubbed in.
41 * Support for Analog Devices AD7873 and AD7843 tested.
42 *
43 * IRQ handling needs a workaround because of a shortcoming in handling
44 * edge triggered IRQs on some platforms like the OMAP1/2. These
45 * platforms don't handle the ARM lazy IRQ disabling properly, thus we
46 * have to maintain our own SW IRQ disabled status. This should be
47 * removed as soon as the affected platform's IRQ handling is fixed.
48 *
49 * App note sbaa036 talks in more detail about accurate sampling...
50 * that ought to help in situations like LCDs inducing noise (which
51 * can also be helped by using synch signals) and more generally.
52 * This driver tries to utilize the measures described in the app
53 * note. The strength of filtering can be set in the board-* specific
54 * files.
55 */
56
57 #define TS_POLL_DELAY 1 /* ms delay before the first sample */
58 #define TS_POLL_PERIOD 5 /* ms delay between samples */
59
60 /* this driver doesn't aim at the peak continuous sample rate */
61 #define SAMPLE_BITS (8 /*cmd*/ + 16 /*sample*/ + 2 /* before, after */)
62
63 struct ads7846_buf {
64 u8 cmd;
65 __be16 data;
66 } __packed;
67
68 struct ads7846_buf_layout {
69 unsigned int offset;
70 unsigned int count;
71 unsigned int skip;
72 };
73
74 /*
75 * We allocate this separately to avoid cache line sharing issues when
76 * driver is used with DMA-based SPI controllers (like atmel_spi) on
77 * systems where main memory is not DMA-coherent (most non-x86 boards).
78 */
79 struct ads7846_packet {
80 unsigned int count;
81 unsigned int count_skip;
82 unsigned int cmds;
83 unsigned int last_cmd_idx;
84 struct ads7846_buf_layout l[5];
85 struct ads7846_buf *rx;
86 struct ads7846_buf *tx;
87
88 struct ads7846_buf pwrdown_cmd;
89
90 bool ignore;
91 u16 x, y, z1, z2;
92 };
93
94 struct ads7846 {
95 struct input_dev *input;
96 char phys[32];
97 char name[32];
98
99 struct spi_device *spi;
100 struct regulator *reg;
101
102 u16 model;
103 u16 vref_mv;
104 u16 vref_delay_usecs;
105 u16 x_plate_ohms;
106 u16 pressure_max;
107
108 bool swap_xy;
109 bool use_internal;
110
111 struct ads7846_packet *packet;
112
113 struct spi_transfer xfer[18];
114 struct spi_message msg[5];
115 int msg_count;
116 wait_queue_head_t wait;
117
118 bool pendown;
119
120 int read_cnt;
121 int read_rep;
122 int last_read;
123
124 u16 debounce_max;
125 u16 debounce_tol;
126 u16 debounce_rep;
127
128 u16 penirq_recheck_delay_usecs;
129
130 struct touchscreen_properties core_prop;
131
132 struct mutex lock;
133 bool stopped; /* P: lock */
134 bool disabled; /* P: lock */
135 bool suspended; /* P: lock */
136
137 int (*filter)(void *data, int data_idx, int *val);
138 void *filter_data;
139 int (*get_pendown_state)(void);
140 struct gpio_desc *gpio_pendown;
141 struct gpio_desc *gpio_hsync;
142
143 void (*wait_for_sync)(void);
144 };
145
146 enum ads7846_filter {
147 ADS7846_FILTER_OK,
148 ADS7846_FILTER_REPEAT,
149 ADS7846_FILTER_IGNORE,
150 };
151
152 /* leave chip selected when we're done, for quicker re-select? */
153 #if 0
154 #define CS_CHANGE(xfer) ((xfer).cs_change = 1)
155 #else
156 #define CS_CHANGE(xfer) ((xfer).cs_change = 0)
157 #endif
158
159 /*--------------------------------------------------------------------------*/
160
161 /* The ADS7846 has touchscreen and other sensors.
162 * Earlier ads784x chips are somewhat compatible.
163 */
164 #define ADS_START (1 << 7)
165 #define ADS_A2A1A0_d_y (1 << 4) /* differential */
166 #define ADS_A2A1A0_d_z1 (3 << 4) /* differential */
167 #define ADS_A2A1A0_d_z2 (4 << 4) /* differential */
168 #define ADS_A2A1A0_d_x (5 << 4) /* differential */
169 #define ADS_A2A1A0_temp0 (0 << 4) /* non-differential */
170 #define ADS_A2A1A0_vbatt (2 << 4) /* non-differential */
171 #define ADS_A2A1A0_vaux (6 << 4) /* non-differential */
172 #define ADS_A2A1A0_temp1 (7 << 4) /* non-differential */
173 #define ADS_8_BIT (1 << 3)
174 #define ADS_12_BIT (0 << 3)
175 #define ADS_SER (1 << 2) /* non-differential */
176 #define ADS_DFR (0 << 2) /* differential */
177 #define ADS_PD10_PDOWN (0 << 0) /* low power mode + penirq */
178 #define ADS_PD10_ADC_ON (1 << 0) /* ADC on */
179 #define ADS_PD10_REF_ON (2 << 0) /* vREF on + penirq */
180 #define ADS_PD10_ALL_ON (3 << 0) /* ADC + vREF on */
181
182 #define MAX_12BIT ((1<<12)-1)
183
184 /* leave ADC powered up (disables penirq) between differential samples */
185 #define READ_12BIT_DFR(x, adc, vref) (ADS_START | ADS_A2A1A0_d_ ## x \
186 | ADS_12_BIT | ADS_DFR | \
187 (adc ? ADS_PD10_ADC_ON : 0) | (vref ? ADS_PD10_REF_ON : 0))
188
189 #define READ_Y(vref) (READ_12BIT_DFR(y, 1, vref))
190 #define READ_Z1(vref) (READ_12BIT_DFR(z1, 1, vref))
191 #define READ_Z2(vref) (READ_12BIT_DFR(z2, 1, vref))
192 #define READ_X(vref) (READ_12BIT_DFR(x, 1, vref))
193 #define PWRDOWN (READ_12BIT_DFR(y, 0, 0)) /* LAST */
194
195 /* single-ended samples need to first power up reference voltage;
196 * we leave both ADC and VREF powered
197 */
198 #define READ_12BIT_SER(x) (ADS_START | ADS_A2A1A0_ ## x \
199 | ADS_12_BIT | ADS_SER)
200
201 #define REF_ON (READ_12BIT_DFR(x, 1, 1))
202 #define REF_OFF (READ_12BIT_DFR(y, 0, 0))
203
204 /* Order commands in the most optimal way to reduce Vref switching and
205 * settling time:
206 * Measure: X; Vref: X+, X-; IN: Y+
207 * Measure: Y; Vref: Y+, Y-; IN: X+
208 * Measure: Z1; Vref: Y+, X-; IN: X+
209 * Measure: Z2; Vref: Y+, X-; IN: Y-
210 */
211 enum ads7846_cmds {
212 ADS7846_X,
213 ADS7846_Y,
214 ADS7846_Z1,
215 ADS7846_Z2,
216 ADS7846_PWDOWN,
217 };
218
get_pendown_state(struct ads7846 * ts)219 static int get_pendown_state(struct ads7846 *ts)
220 {
221 if (ts->get_pendown_state)
222 return ts->get_pendown_state();
223
224 return gpiod_get_value(ts->gpio_pendown);
225 }
226
ads7846_report_pen_up(struct ads7846 * ts)227 static void ads7846_report_pen_up(struct ads7846 *ts)
228 {
229 struct input_dev *input = ts->input;
230
231 input_report_key(input, BTN_TOUCH, 0);
232 input_report_abs(input, ABS_PRESSURE, 0);
233 input_sync(input);
234
235 ts->pendown = false;
236 dev_vdbg(&ts->spi->dev, "UP\n");
237 }
238
239 /* Must be called with ts->lock held */
ads7846_stop(struct ads7846 * ts)240 static void ads7846_stop(struct ads7846 *ts)
241 {
242 if (!ts->disabled && !ts->suspended) {
243 /* Signal IRQ thread to stop polling and disable the handler. */
244 ts->stopped = true;
245 mb();
246 wake_up(&ts->wait);
247 disable_irq(ts->spi->irq);
248 }
249 }
250
251 /* Must be called with ts->lock held */
ads7846_restart(struct ads7846 * ts)252 static void ads7846_restart(struct ads7846 *ts)
253 {
254 if (!ts->disabled && !ts->suspended) {
255 /* Check if pen was released since last stop */
256 if (ts->pendown && !get_pendown_state(ts))
257 ads7846_report_pen_up(ts);
258
259 /* Tell IRQ thread that it may poll the device. */
260 ts->stopped = false;
261 mb();
262 enable_irq(ts->spi->irq);
263 }
264 }
265
266 /* Must be called with ts->lock held */
__ads7846_disable(struct ads7846 * ts)267 static void __ads7846_disable(struct ads7846 *ts)
268 {
269 ads7846_stop(ts);
270 regulator_disable(ts->reg);
271
272 /*
273 * We know the chip's in low power mode since we always
274 * leave it that way after every request
275 */
276 }
277
278 /* Must be called with ts->lock held */
__ads7846_enable(struct ads7846 * ts)279 static void __ads7846_enable(struct ads7846 *ts)
280 {
281 int error;
282
283 error = regulator_enable(ts->reg);
284 if (error != 0)
285 dev_err(&ts->spi->dev, "Failed to enable supply: %d\n", error);
286
287 ads7846_restart(ts);
288 }
289
ads7846_disable(struct ads7846 * ts)290 static void ads7846_disable(struct ads7846 *ts)
291 {
292 mutex_lock(&ts->lock);
293
294 if (!ts->disabled) {
295
296 if (!ts->suspended)
297 __ads7846_disable(ts);
298
299 ts->disabled = true;
300 }
301
302 mutex_unlock(&ts->lock);
303 }
304
ads7846_enable(struct ads7846 * ts)305 static void ads7846_enable(struct ads7846 *ts)
306 {
307 mutex_lock(&ts->lock);
308
309 if (ts->disabled) {
310
311 ts->disabled = false;
312
313 if (!ts->suspended)
314 __ads7846_enable(ts);
315 }
316
317 mutex_unlock(&ts->lock);
318 }
319
320 /*--------------------------------------------------------------------------*/
321
322 /*
323 * Non-touchscreen sensors only use single-ended conversions.
324 * The range is GND..vREF. The ads7843 and ads7835 must use external vREF;
325 * ads7846 lets that pin be unconnected, to use internal vREF.
326 */
327
328 struct ser_req {
329 u8 ref_on;
330 u8 command;
331 u8 ref_off;
332 u16 scratch;
333 struct spi_message msg;
334 struct spi_transfer xfer[8];
335 /*
336 * DMA (thus cache coherency maintenance) requires the
337 * transfer buffers to live in their own cache lines.
338 */
339 __be16 sample ____cacheline_aligned;
340 };
341
342 struct ads7845_ser_req {
343 u8 command[3];
344 struct spi_message msg;
345 struct spi_transfer xfer[2];
346 /*
347 * DMA (thus cache coherency maintenance) requires the
348 * transfer buffers to live in their own cache lines.
349 */
350 u8 sample[3] ____cacheline_aligned;
351 };
352
ads7846_read12_ser(struct device * dev,unsigned command)353 static int ads7846_read12_ser(struct device *dev, unsigned command)
354 {
355 struct spi_device *spi = to_spi_device(dev);
356 struct ads7846 *ts = dev_get_drvdata(dev);
357 struct ser_req *req;
358 int status;
359
360 req = kzalloc(sizeof *req, GFP_KERNEL);
361 if (!req)
362 return -ENOMEM;
363
364 spi_message_init(&req->msg);
365
366 /* maybe turn on internal vREF, and let it settle */
367 if (ts->use_internal) {
368 req->ref_on = REF_ON;
369 req->xfer[0].tx_buf = &req->ref_on;
370 req->xfer[0].len = 1;
371 spi_message_add_tail(&req->xfer[0], &req->msg);
372
373 req->xfer[1].rx_buf = &req->scratch;
374 req->xfer[1].len = 2;
375
376 /* for 1uF, settle for 800 usec; no cap, 100 usec. */
377 req->xfer[1].delay.value = ts->vref_delay_usecs;
378 req->xfer[1].delay.unit = SPI_DELAY_UNIT_USECS;
379 spi_message_add_tail(&req->xfer[1], &req->msg);
380
381 /* Enable reference voltage */
382 command |= ADS_PD10_REF_ON;
383 }
384
385 /* Enable ADC in every case */
386 command |= ADS_PD10_ADC_ON;
387
388 /* take sample */
389 req->command = (u8) command;
390 req->xfer[2].tx_buf = &req->command;
391 req->xfer[2].len = 1;
392 spi_message_add_tail(&req->xfer[2], &req->msg);
393
394 req->xfer[3].rx_buf = &req->sample;
395 req->xfer[3].len = 2;
396 spi_message_add_tail(&req->xfer[3], &req->msg);
397
398 /* REVISIT: take a few more samples, and compare ... */
399
400 /* converter in low power mode & enable PENIRQ */
401 req->ref_off = PWRDOWN;
402 req->xfer[4].tx_buf = &req->ref_off;
403 req->xfer[4].len = 1;
404 spi_message_add_tail(&req->xfer[4], &req->msg);
405
406 req->xfer[5].rx_buf = &req->scratch;
407 req->xfer[5].len = 2;
408 spi_message_add_tail(&req->xfer[5], &req->msg);
409
410 /* clear the command register */
411 req->scratch = 0;
412 req->xfer[6].tx_buf = &req->scratch;
413 req->xfer[6].len = 1;
414 spi_message_add_tail(&req->xfer[6], &req->msg);
415
416 req->xfer[7].rx_buf = &req->scratch;
417 req->xfer[7].len = 2;
418 CS_CHANGE(req->xfer[7]);
419 spi_message_add_tail(&req->xfer[7], &req->msg);
420
421 mutex_lock(&ts->lock);
422 ads7846_stop(ts);
423 status = spi_sync(spi, &req->msg);
424 ads7846_restart(ts);
425 mutex_unlock(&ts->lock);
426
427 if (status == 0) {
428 /* on-wire is a must-ignore bit, a BE12 value, then padding */
429 status = be16_to_cpu(req->sample);
430 status = status >> 3;
431 status &= 0x0fff;
432 }
433
434 kfree(req);
435 return status;
436 }
437
ads7845_read12_ser(struct device * dev,unsigned command)438 static int ads7845_read12_ser(struct device *dev, unsigned command)
439 {
440 struct spi_device *spi = to_spi_device(dev);
441 struct ads7846 *ts = dev_get_drvdata(dev);
442 struct ads7845_ser_req *req;
443 int status;
444
445 req = kzalloc(sizeof *req, GFP_KERNEL);
446 if (!req)
447 return -ENOMEM;
448
449 spi_message_init(&req->msg);
450
451 req->command[0] = (u8) command;
452 req->xfer[0].tx_buf = req->command;
453 req->xfer[0].rx_buf = req->sample;
454 req->xfer[0].len = 3;
455 spi_message_add_tail(&req->xfer[0], &req->msg);
456
457 mutex_lock(&ts->lock);
458 ads7846_stop(ts);
459 status = spi_sync(spi, &req->msg);
460 ads7846_restart(ts);
461 mutex_unlock(&ts->lock);
462
463 if (status == 0) {
464 /* BE12 value, then padding */
465 status = get_unaligned_be16(&req->sample[1]);
466 status = status >> 3;
467 status &= 0x0fff;
468 }
469
470 kfree(req);
471 return status;
472 }
473
474 #if IS_ENABLED(CONFIG_HWMON)
475
476 #define SHOW(name, var, adjust) static ssize_t \
477 name ## _show(struct device *dev, struct device_attribute *attr, char *buf) \
478 { \
479 struct ads7846 *ts = dev_get_drvdata(dev); \
480 ssize_t v = ads7846_read12_ser(&ts->spi->dev, \
481 READ_12BIT_SER(var)); \
482 if (v < 0) \
483 return v; \
484 return sprintf(buf, "%u\n", adjust(ts, v)); \
485 } \
486 static DEVICE_ATTR(name, S_IRUGO, name ## _show, NULL);
487
488
489 /* Sysfs conventions report temperatures in millidegrees Celsius.
490 * ADS7846 could use the low-accuracy two-sample scheme, but can't do the high
491 * accuracy scheme without calibration data. For now we won't try either;
492 * userspace sees raw sensor values, and must scale/calibrate appropriately.
493 */
null_adjust(struct ads7846 * ts,ssize_t v)494 static inline unsigned null_adjust(struct ads7846 *ts, ssize_t v)
495 {
496 return v;
497 }
498
SHOW(temp0,temp0,null_adjust)499 SHOW(temp0, temp0, null_adjust) /* temp1_input */
500 SHOW(temp1, temp1, null_adjust) /* temp2_input */
501
502
503 /* sysfs conventions report voltages in millivolts. We can convert voltages
504 * if we know vREF. userspace may need to scale vAUX to match the board's
505 * external resistors; we assume that vBATT only uses the internal ones.
506 */
507 static inline unsigned vaux_adjust(struct ads7846 *ts, ssize_t v)
508 {
509 unsigned retval = v;
510
511 /* external resistors may scale vAUX into 0..vREF */
512 retval *= ts->vref_mv;
513 retval = retval >> 12;
514
515 return retval;
516 }
517
vbatt_adjust(struct ads7846 * ts,ssize_t v)518 static inline unsigned vbatt_adjust(struct ads7846 *ts, ssize_t v)
519 {
520 unsigned retval = vaux_adjust(ts, v);
521
522 /* ads7846 has a resistor ladder to scale this signal down */
523 if (ts->model == 7846)
524 retval *= 4;
525
526 return retval;
527 }
528
SHOW(in0_input,vaux,vaux_adjust)529 SHOW(in0_input, vaux, vaux_adjust)
530 SHOW(in1_input, vbatt, vbatt_adjust)
531
532 static umode_t ads7846_is_visible(struct kobject *kobj, struct attribute *attr,
533 int index)
534 {
535 struct device *dev = kobj_to_dev(kobj);
536 struct ads7846 *ts = dev_get_drvdata(dev);
537
538 if (ts->model == 7843 && index < 2) /* in0, in1 */
539 return 0;
540 if (ts->model == 7845 && index != 2) /* in0 */
541 return 0;
542
543 return attr->mode;
544 }
545
546 static struct attribute *ads7846_attributes[] = {
547 &dev_attr_temp0.attr, /* 0 */
548 &dev_attr_temp1.attr, /* 1 */
549 &dev_attr_in0_input.attr, /* 2 */
550 &dev_attr_in1_input.attr, /* 3 */
551 NULL,
552 };
553
554 static const struct attribute_group ads7846_attr_group = {
555 .attrs = ads7846_attributes,
556 .is_visible = ads7846_is_visible,
557 };
558 __ATTRIBUTE_GROUPS(ads7846_attr);
559
ads784x_hwmon_register(struct spi_device * spi,struct ads7846 * ts)560 static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts)
561 {
562 struct device *hwmon;
563
564 /* hwmon sensors need a reference voltage */
565 switch (ts->model) {
566 case 7846:
567 if (!ts->vref_mv) {
568 dev_dbg(&spi->dev, "assuming 2.5V internal vREF\n");
569 ts->vref_mv = 2500;
570 ts->use_internal = true;
571 }
572 break;
573 case 7845:
574 case 7843:
575 if (!ts->vref_mv) {
576 dev_warn(&spi->dev,
577 "external vREF for ADS%d not specified\n",
578 ts->model);
579 return 0;
580 }
581 break;
582 }
583
584 hwmon = devm_hwmon_device_register_with_groups(&spi->dev,
585 spi->modalias, ts,
586 ads7846_attr_groups);
587
588 return PTR_ERR_OR_ZERO(hwmon);
589 }
590
591 #else
ads784x_hwmon_register(struct spi_device * spi,struct ads7846 * ts)592 static inline int ads784x_hwmon_register(struct spi_device *spi,
593 struct ads7846 *ts)
594 {
595 return 0;
596 }
597 #endif
598
ads7846_pen_down_show(struct device * dev,struct device_attribute * attr,char * buf)599 static ssize_t ads7846_pen_down_show(struct device *dev,
600 struct device_attribute *attr, char *buf)
601 {
602 struct ads7846 *ts = dev_get_drvdata(dev);
603
604 return sprintf(buf, "%u\n", ts->pendown);
605 }
606
607 static DEVICE_ATTR(pen_down, S_IRUGO, ads7846_pen_down_show, NULL);
608
ads7846_disable_show(struct device * dev,struct device_attribute * attr,char * buf)609 static ssize_t ads7846_disable_show(struct device *dev,
610 struct device_attribute *attr, char *buf)
611 {
612 struct ads7846 *ts = dev_get_drvdata(dev);
613
614 return sprintf(buf, "%u\n", ts->disabled);
615 }
616
ads7846_disable_store(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)617 static ssize_t ads7846_disable_store(struct device *dev,
618 struct device_attribute *attr,
619 const char *buf, size_t count)
620 {
621 struct ads7846 *ts = dev_get_drvdata(dev);
622 unsigned int i;
623 int err;
624
625 err = kstrtouint(buf, 10, &i);
626 if (err)
627 return err;
628
629 if (i)
630 ads7846_disable(ts);
631 else
632 ads7846_enable(ts);
633
634 return count;
635 }
636
637 static DEVICE_ATTR(disable, 0664, ads7846_disable_show, ads7846_disable_store);
638
639 static struct attribute *ads784x_attrs[] = {
640 &dev_attr_pen_down.attr,
641 &dev_attr_disable.attr,
642 NULL,
643 };
644 ATTRIBUTE_GROUPS(ads784x);
645
646 /*--------------------------------------------------------------------------*/
647
ads7846_debounce_filter(void * ads,int data_idx,int * val)648 static int ads7846_debounce_filter(void *ads, int data_idx, int *val)
649 {
650 struct ads7846 *ts = ads;
651
652 if (!ts->read_cnt || (abs(ts->last_read - *val) > ts->debounce_tol)) {
653 /* Start over collecting consistent readings. */
654 ts->read_rep = 0;
655 /*
656 * Repeat it, if this was the first read or the read
657 * wasn't consistent enough.
658 */
659 if (ts->read_cnt < ts->debounce_max) {
660 ts->last_read = *val;
661 ts->read_cnt++;
662 return ADS7846_FILTER_REPEAT;
663 } else {
664 /*
665 * Maximum number of debouncing reached and still
666 * not enough number of consistent readings. Abort
667 * the whole sample, repeat it in the next sampling
668 * period.
669 */
670 ts->read_cnt = 0;
671 return ADS7846_FILTER_IGNORE;
672 }
673 } else {
674 if (++ts->read_rep > ts->debounce_rep) {
675 /*
676 * Got a good reading for this coordinate,
677 * go for the next one.
678 */
679 ts->read_cnt = 0;
680 ts->read_rep = 0;
681 return ADS7846_FILTER_OK;
682 } else {
683 /* Read more values that are consistent. */
684 ts->read_cnt++;
685 return ADS7846_FILTER_REPEAT;
686 }
687 }
688 }
689
ads7846_no_filter(void * ads,int data_idx,int * val)690 static int ads7846_no_filter(void *ads, int data_idx, int *val)
691 {
692 return ADS7846_FILTER_OK;
693 }
694
ads7846_get_value(struct ads7846_buf * buf)695 static int ads7846_get_value(struct ads7846_buf *buf)
696 {
697 int value;
698
699 value = be16_to_cpup(&buf->data);
700
701 /* enforce ADC output is 12 bits width */
702 return (value >> 3) & 0xfff;
703 }
704
ads7846_set_cmd_val(struct ads7846 * ts,enum ads7846_cmds cmd_idx,u16 val)705 static void ads7846_set_cmd_val(struct ads7846 *ts, enum ads7846_cmds cmd_idx,
706 u16 val)
707 {
708 struct ads7846_packet *packet = ts->packet;
709
710 switch (cmd_idx) {
711 case ADS7846_Y:
712 packet->y = val;
713 break;
714 case ADS7846_X:
715 packet->x = val;
716 break;
717 case ADS7846_Z1:
718 packet->z1 = val;
719 break;
720 case ADS7846_Z2:
721 packet->z2 = val;
722 break;
723 default:
724 WARN_ON_ONCE(1);
725 }
726 }
727
ads7846_get_cmd(enum ads7846_cmds cmd_idx,int vref)728 static u8 ads7846_get_cmd(enum ads7846_cmds cmd_idx, int vref)
729 {
730 switch (cmd_idx) {
731 case ADS7846_Y:
732 return READ_Y(vref);
733 case ADS7846_X:
734 return READ_X(vref);
735
736 /* 7846 specific commands */
737 case ADS7846_Z1:
738 return READ_Z1(vref);
739 case ADS7846_Z2:
740 return READ_Z2(vref);
741 case ADS7846_PWDOWN:
742 return PWRDOWN;
743 default:
744 WARN_ON_ONCE(1);
745 }
746
747 return 0;
748 }
749
ads7846_cmd_need_settle(enum ads7846_cmds cmd_idx)750 static bool ads7846_cmd_need_settle(enum ads7846_cmds cmd_idx)
751 {
752 switch (cmd_idx) {
753 case ADS7846_X:
754 case ADS7846_Y:
755 case ADS7846_Z1:
756 case ADS7846_Z2:
757 return true;
758 case ADS7846_PWDOWN:
759 return false;
760 default:
761 WARN_ON_ONCE(1);
762 }
763
764 return false;
765 }
766
ads7846_filter(struct ads7846 * ts)767 static int ads7846_filter(struct ads7846 *ts)
768 {
769 struct ads7846_packet *packet = ts->packet;
770 int action;
771 int val;
772 unsigned int cmd_idx, b;
773
774 packet->ignore = false;
775 for (cmd_idx = packet->last_cmd_idx; cmd_idx < packet->cmds - 1; cmd_idx++) {
776 struct ads7846_buf_layout *l = &packet->l[cmd_idx];
777
778 packet->last_cmd_idx = cmd_idx;
779
780 for (b = l->skip; b < l->count; b++) {
781 val = ads7846_get_value(&packet->rx[l->offset + b]);
782
783 action = ts->filter(ts->filter_data, cmd_idx, &val);
784 if (action == ADS7846_FILTER_REPEAT) {
785 if (b == l->count - 1)
786 return -EAGAIN;
787 } else if (action == ADS7846_FILTER_OK) {
788 ads7846_set_cmd_val(ts, cmd_idx, val);
789 break;
790 } else {
791 packet->ignore = true;
792 return 0;
793 }
794 }
795 }
796
797 return 0;
798 }
799
ads7846_wait_for_hsync(struct ads7846 * ts)800 static void ads7846_wait_for_hsync(struct ads7846 *ts)
801 {
802 if (ts->wait_for_sync) {
803 ts->wait_for_sync();
804 return;
805 }
806
807 if (!ts->gpio_hsync)
808 return;
809
810 /*
811 * Wait for HSYNC to assert the line should be flagged
812 * as active low so here we are waiting for it to assert
813 */
814 while (!gpiod_get_value(ts->gpio_hsync))
815 cpu_relax();
816
817 /* Then we wait for it do de-assert */
818 while (gpiod_get_value(ts->gpio_hsync))
819 cpu_relax();
820 }
821
ads7846_read_state(struct ads7846 * ts)822 static void ads7846_read_state(struct ads7846 *ts)
823 {
824 struct ads7846_packet *packet = ts->packet;
825 struct spi_message *m;
826 int msg_idx = 0;
827 int error;
828
829 packet->last_cmd_idx = 0;
830
831 while (true) {
832 ads7846_wait_for_hsync(ts);
833
834 m = &ts->msg[msg_idx];
835 error = spi_sync(ts->spi, m);
836 if (error) {
837 dev_err_ratelimited(&ts->spi->dev, "spi_sync --> %d\n", error);
838 packet->ignore = true;
839 return;
840 }
841
842 error = ads7846_filter(ts);
843 if (error)
844 continue;
845
846 return;
847 }
848 }
849
ads7846_report_state(struct ads7846 * ts)850 static void ads7846_report_state(struct ads7846 *ts)
851 {
852 struct ads7846_packet *packet = ts->packet;
853 unsigned int Rt;
854 u16 x, y, z1, z2;
855
856 x = packet->x;
857 y = packet->y;
858 if (ts->model == 7845) {
859 z1 = 0;
860 z2 = 0;
861 } else {
862 z1 = packet->z1;
863 z2 = packet->z2;
864 }
865
866 /* range filtering */
867 if (x == MAX_12BIT)
868 x = 0;
869
870 if (ts->model == 7843 || ts->model == 7845) {
871 Rt = ts->pressure_max / 2;
872 } else if (likely(x && z1)) {
873 /* compute touch pressure resistance using equation #2 */
874 Rt = z2;
875 Rt -= z1;
876 Rt *= ts->x_plate_ohms;
877 Rt = DIV_ROUND_CLOSEST(Rt, 16);
878 Rt *= x;
879 Rt /= z1;
880 Rt = DIV_ROUND_CLOSEST(Rt, 256);
881 } else {
882 Rt = 0;
883 }
884
885 /*
886 * Sample found inconsistent by debouncing or pressure is beyond
887 * the maximum. Don't report it to user space, repeat at least
888 * once more the measurement
889 */
890 if (packet->ignore || Rt > ts->pressure_max) {
891 dev_vdbg(&ts->spi->dev, "ignored %d pressure %d\n",
892 packet->ignore, Rt);
893 return;
894 }
895
896 /*
897 * Maybe check the pendown state before reporting. This discards
898 * false readings when the pen is lifted.
899 */
900 if (ts->penirq_recheck_delay_usecs) {
901 udelay(ts->penirq_recheck_delay_usecs);
902 if (!get_pendown_state(ts))
903 Rt = 0;
904 }
905
906 /*
907 * NOTE: We can't rely on the pressure to determine the pen down
908 * state, even this controller has a pressure sensor. The pressure
909 * value can fluctuate for quite a while after lifting the pen and
910 * in some cases may not even settle at the expected value.
911 *
912 * The only safe way to check for the pen up condition is in the
913 * timer by reading the pen signal state (it's a GPIO _and_ IRQ).
914 */
915 if (Rt) {
916 struct input_dev *input = ts->input;
917
918 if (!ts->pendown) {
919 input_report_key(input, BTN_TOUCH, 1);
920 ts->pendown = true;
921 dev_vdbg(&ts->spi->dev, "DOWN\n");
922 }
923
924 touchscreen_report_pos(input, &ts->core_prop, x, y, false);
925 input_report_abs(input, ABS_PRESSURE, ts->pressure_max - Rt);
926
927 input_sync(input);
928 dev_vdbg(&ts->spi->dev, "%4d/%4d/%4d\n", x, y, Rt);
929 }
930 }
931
ads7846_hard_irq(int irq,void * handle)932 static irqreturn_t ads7846_hard_irq(int irq, void *handle)
933 {
934 struct ads7846 *ts = handle;
935
936 return get_pendown_state(ts) ? IRQ_WAKE_THREAD : IRQ_HANDLED;
937 }
938
939
ads7846_irq(int irq,void * handle)940 static irqreturn_t ads7846_irq(int irq, void *handle)
941 {
942 struct ads7846 *ts = handle;
943
944 /* Start with a small delay before checking pendown state */
945 msleep(TS_POLL_DELAY);
946
947 while (!ts->stopped && get_pendown_state(ts)) {
948
949 /* pen is down, continue with the measurement */
950 ads7846_read_state(ts);
951
952 if (!ts->stopped)
953 ads7846_report_state(ts);
954
955 wait_event_timeout(ts->wait, ts->stopped,
956 msecs_to_jiffies(TS_POLL_PERIOD));
957 }
958
959 if (ts->pendown && !ts->stopped)
960 ads7846_report_pen_up(ts);
961
962 return IRQ_HANDLED;
963 }
964
ads7846_suspend(struct device * dev)965 static int ads7846_suspend(struct device *dev)
966 {
967 struct ads7846 *ts = dev_get_drvdata(dev);
968
969 mutex_lock(&ts->lock);
970
971 if (!ts->suspended) {
972
973 if (!ts->disabled)
974 __ads7846_disable(ts);
975
976 if (device_may_wakeup(&ts->spi->dev))
977 enable_irq_wake(ts->spi->irq);
978
979 ts->suspended = true;
980 }
981
982 mutex_unlock(&ts->lock);
983
984 return 0;
985 }
986
ads7846_resume(struct device * dev)987 static int ads7846_resume(struct device *dev)
988 {
989 struct ads7846 *ts = dev_get_drvdata(dev);
990
991 mutex_lock(&ts->lock);
992
993 if (ts->suspended) {
994
995 ts->suspended = false;
996
997 if (device_may_wakeup(&ts->spi->dev))
998 disable_irq_wake(ts->spi->irq);
999
1000 if (!ts->disabled)
1001 __ads7846_enable(ts);
1002 }
1003
1004 mutex_unlock(&ts->lock);
1005
1006 return 0;
1007 }
1008
1009 static DEFINE_SIMPLE_DEV_PM_OPS(ads7846_pm, ads7846_suspend, ads7846_resume);
1010
ads7846_setup_pendown(struct spi_device * spi,struct ads7846 * ts,const struct ads7846_platform_data * pdata)1011 static int ads7846_setup_pendown(struct spi_device *spi,
1012 struct ads7846 *ts,
1013 const struct ads7846_platform_data *pdata)
1014 {
1015 /*
1016 * REVISIT when the irq can be triggered active-low, or if for some
1017 * reason the touchscreen isn't hooked up, we don't need to access
1018 * the pendown state.
1019 */
1020
1021 if (pdata->get_pendown_state) {
1022 ts->get_pendown_state = pdata->get_pendown_state;
1023 } else {
1024 ts->gpio_pendown = gpiod_get(&spi->dev, "pendown", GPIOD_IN);
1025 if (IS_ERR(ts->gpio_pendown)) {
1026 dev_err(&spi->dev, "failed to request pendown GPIO\n");
1027 return PTR_ERR(ts->gpio_pendown);
1028 }
1029 if (pdata->gpio_pendown_debounce)
1030 gpiod_set_debounce(ts->gpio_pendown,
1031 pdata->gpio_pendown_debounce);
1032 }
1033
1034 return 0;
1035 }
1036
1037 /*
1038 * Set up the transfers to read touchscreen state; this assumes we
1039 * use formula #2 for pressure, not #3.
1040 */
ads7846_setup_spi_msg(struct ads7846 * ts,const struct ads7846_platform_data * pdata)1041 static int ads7846_setup_spi_msg(struct ads7846 *ts,
1042 const struct ads7846_platform_data *pdata)
1043 {
1044 struct spi_message *m = &ts->msg[0];
1045 struct spi_transfer *x = ts->xfer;
1046 struct ads7846_packet *packet = ts->packet;
1047 int vref = pdata->keep_vref_on;
1048 unsigned int count, offset = 0;
1049 unsigned int cmd_idx, b;
1050 unsigned long time;
1051 size_t size = 0;
1052
1053 /* time per bit */
1054 time = NSEC_PER_SEC / ts->spi->max_speed_hz;
1055
1056 count = pdata->settle_delay_usecs * NSEC_PER_USEC / time;
1057 packet->count_skip = DIV_ROUND_UP(count, 24);
1058
1059 if (ts->debounce_max && ts->debounce_rep)
1060 /* ads7846_debounce_filter() is making ts->debounce_rep + 2
1061 * reads. So we need to get all samples for normal case. */
1062 packet->count = ts->debounce_rep + 2;
1063 else
1064 packet->count = 1;
1065
1066 if (ts->model == 7846)
1067 packet->cmds = 5; /* x, y, z1, z2, pwdown */
1068 else
1069 packet->cmds = 3; /* x, y, pwdown */
1070
1071 for (cmd_idx = 0; cmd_idx < packet->cmds; cmd_idx++) {
1072 struct ads7846_buf_layout *l = &packet->l[cmd_idx];
1073 unsigned int max_count;
1074
1075 if (cmd_idx == packet->cmds - 1)
1076 cmd_idx = ADS7846_PWDOWN;
1077
1078 if (ads7846_cmd_need_settle(cmd_idx))
1079 max_count = packet->count + packet->count_skip;
1080 else
1081 max_count = packet->count;
1082
1083 l->offset = offset;
1084 offset += max_count;
1085 l->count = max_count;
1086 l->skip = packet->count_skip;
1087 size += sizeof(*packet->tx) * max_count;
1088 }
1089
1090 packet->tx = devm_kzalloc(&ts->spi->dev, size, GFP_KERNEL);
1091 if (!packet->tx)
1092 return -ENOMEM;
1093
1094 packet->rx = devm_kzalloc(&ts->spi->dev, size, GFP_KERNEL);
1095 if (!packet->rx)
1096 return -ENOMEM;
1097
1098 if (ts->model == 7873) {
1099 /*
1100 * The AD7873 is almost identical to the ADS7846
1101 * keep VREF off during differential/ratiometric
1102 * conversion modes.
1103 */
1104 ts->model = 7846;
1105 vref = 0;
1106 }
1107
1108 ts->msg_count = 1;
1109 spi_message_init(m);
1110 m->context = ts;
1111
1112 for (cmd_idx = 0; cmd_idx < packet->cmds; cmd_idx++) {
1113 struct ads7846_buf_layout *l = &packet->l[cmd_idx];
1114 u8 cmd;
1115
1116 if (cmd_idx == packet->cmds - 1)
1117 cmd_idx = ADS7846_PWDOWN;
1118
1119 cmd = ads7846_get_cmd(cmd_idx, vref);
1120
1121 for (b = 0; b < l->count; b++)
1122 packet->tx[l->offset + b].cmd = cmd;
1123 }
1124
1125 x->tx_buf = packet->tx;
1126 x->rx_buf = packet->rx;
1127 x->len = size;
1128 spi_message_add_tail(x, m);
1129
1130 return 0;
1131 }
1132
1133 static const struct of_device_id ads7846_dt_ids[] = {
1134 { .compatible = "ti,tsc2046", .data = (void *) 7846 },
1135 { .compatible = "ti,ads7843", .data = (void *) 7843 },
1136 { .compatible = "ti,ads7845", .data = (void *) 7845 },
1137 { .compatible = "ti,ads7846", .data = (void *) 7846 },
1138 { .compatible = "ti,ads7873", .data = (void *) 7873 },
1139 { }
1140 };
1141 MODULE_DEVICE_TABLE(of, ads7846_dt_ids);
1142
1143 static const struct spi_device_id ads7846_spi_ids[] = {
1144 { "tsc2046", 7846 },
1145 { "ads7843", 7843 },
1146 { "ads7845", 7845 },
1147 { "ads7846", 7846 },
1148 { "ads7873", 7873 },
1149 { },
1150 };
1151 MODULE_DEVICE_TABLE(spi, ads7846_spi_ids);
1152
ads7846_get_props(struct device * dev)1153 static const struct ads7846_platform_data *ads7846_get_props(struct device *dev)
1154 {
1155 struct ads7846_platform_data *pdata;
1156 u32 value;
1157
1158 pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
1159 if (!pdata)
1160 return ERR_PTR(-ENOMEM);
1161
1162 pdata->model = (uintptr_t)device_get_match_data(dev);
1163
1164 device_property_read_u16(dev, "ti,vref-delay-usecs",
1165 &pdata->vref_delay_usecs);
1166 device_property_read_u16(dev, "ti,vref-mv", &pdata->vref_mv);
1167 pdata->keep_vref_on = device_property_read_bool(dev, "ti,keep-vref-on");
1168
1169 pdata->swap_xy = device_property_read_bool(dev, "ti,swap-xy");
1170
1171 device_property_read_u16(dev, "ti,settle-delay-usec",
1172 &pdata->settle_delay_usecs);
1173 device_property_read_u16(dev, "ti,penirq-recheck-delay-usecs",
1174 &pdata->penirq_recheck_delay_usecs);
1175
1176 device_property_read_u16(dev, "ti,x-plate-ohms", &pdata->x_plate_ohms);
1177 device_property_read_u16(dev, "ti,y-plate-ohms", &pdata->y_plate_ohms);
1178
1179 device_property_read_u16(dev, "ti,x-min", &pdata->x_min);
1180 device_property_read_u16(dev, "ti,y-min", &pdata->y_min);
1181 device_property_read_u16(dev, "ti,x-max", &pdata->x_max);
1182 device_property_read_u16(dev, "ti,y-max", &pdata->y_max);
1183
1184 /*
1185 * touchscreen-max-pressure gets parsed during
1186 * touchscreen_parse_properties()
1187 */
1188 device_property_read_u16(dev, "ti,pressure-min", &pdata->pressure_min);
1189 if (!device_property_read_u32(dev, "touchscreen-min-pressure", &value))
1190 pdata->pressure_min = (u16) value;
1191 device_property_read_u16(dev, "ti,pressure-max", &pdata->pressure_max);
1192
1193 device_property_read_u16(dev, "ti,debounce-max", &pdata->debounce_max);
1194 if (!device_property_read_u32(dev, "touchscreen-average-samples", &value))
1195 pdata->debounce_max = (u16) value;
1196 device_property_read_u16(dev, "ti,debounce-tol", &pdata->debounce_tol);
1197 device_property_read_u16(dev, "ti,debounce-rep", &pdata->debounce_rep);
1198
1199 device_property_read_u32(dev, "ti,pendown-gpio-debounce",
1200 &pdata->gpio_pendown_debounce);
1201
1202 pdata->wakeup = device_property_read_bool(dev, "wakeup-source") ||
1203 device_property_read_bool(dev, "linux,wakeup");
1204
1205 return pdata;
1206 }
1207
ads7846_regulator_disable(void * regulator)1208 static void ads7846_regulator_disable(void *regulator)
1209 {
1210 regulator_disable(regulator);
1211 }
1212
ads7846_probe(struct spi_device * spi)1213 static int ads7846_probe(struct spi_device *spi)
1214 {
1215 const struct ads7846_platform_data *pdata;
1216 struct ads7846 *ts;
1217 struct device *dev = &spi->dev;
1218 struct ads7846_packet *packet;
1219 struct input_dev *input_dev;
1220 unsigned long irq_flags;
1221 int err;
1222
1223 if (!spi->irq) {
1224 dev_dbg(dev, "no IRQ?\n");
1225 return -EINVAL;
1226 }
1227
1228 /* don't exceed max specified sample rate */
1229 if (spi->max_speed_hz > (125000 * SAMPLE_BITS)) {
1230 dev_err(dev, "f(sample) %d KHz?\n",
1231 (spi->max_speed_hz/SAMPLE_BITS)/1000);
1232 return -EINVAL;
1233 }
1234
1235 /*
1236 * We'd set TX word size 8 bits and RX word size to 13 bits ... except
1237 * that even if the hardware can do that, the SPI controller driver
1238 * may not. So we stick to very-portable 8 bit words, both RX and TX.
1239 */
1240 spi->bits_per_word = 8;
1241 spi->mode &= ~SPI_MODE_X_MASK;
1242 spi->mode |= SPI_MODE_0;
1243 err = spi_setup(spi);
1244 if (err < 0)
1245 return err;
1246
1247 ts = devm_kzalloc(dev, sizeof(struct ads7846), GFP_KERNEL);
1248 if (!ts)
1249 return -ENOMEM;
1250
1251 packet = devm_kzalloc(dev, sizeof(struct ads7846_packet), GFP_KERNEL);
1252 if (!packet)
1253 return -ENOMEM;
1254
1255 input_dev = devm_input_allocate_device(dev);
1256 if (!input_dev)
1257 return -ENOMEM;
1258
1259 spi_set_drvdata(spi, ts);
1260
1261 ts->packet = packet;
1262 ts->spi = spi;
1263 ts->input = input_dev;
1264
1265 mutex_init(&ts->lock);
1266 init_waitqueue_head(&ts->wait);
1267
1268 pdata = dev_get_platdata(dev);
1269 if (!pdata) {
1270 pdata = ads7846_get_props(dev);
1271 if (IS_ERR(pdata))
1272 return PTR_ERR(pdata);
1273 }
1274
1275 ts->model = pdata->model ? : 7846;
1276 ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100;
1277 ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
1278 ts->vref_mv = pdata->vref_mv;
1279
1280 if (pdata->debounce_max) {
1281 ts->debounce_max = pdata->debounce_max;
1282 if (ts->debounce_max < 2)
1283 ts->debounce_max = 2;
1284 ts->debounce_tol = pdata->debounce_tol;
1285 ts->debounce_rep = pdata->debounce_rep;
1286 ts->filter = ads7846_debounce_filter;
1287 ts->filter_data = ts;
1288 } else {
1289 ts->filter = ads7846_no_filter;
1290 }
1291
1292 err = ads7846_setup_pendown(spi, ts, pdata);
1293 if (err)
1294 return err;
1295
1296 if (pdata->penirq_recheck_delay_usecs)
1297 ts->penirq_recheck_delay_usecs =
1298 pdata->penirq_recheck_delay_usecs;
1299
1300 ts->wait_for_sync = pdata->wait_for_sync;
1301
1302 ts->gpio_hsync = devm_gpiod_get_optional(dev, "ti,hsync", GPIOD_IN);
1303 if (IS_ERR(ts->gpio_hsync))
1304 return PTR_ERR(ts->gpio_hsync);
1305
1306 snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev));
1307 snprintf(ts->name, sizeof(ts->name), "ADS%d Touchscreen", ts->model);
1308
1309 input_dev->name = ts->name;
1310 input_dev->phys = ts->phys;
1311
1312 input_dev->id.bustype = BUS_SPI;
1313 input_dev->id.product = pdata->model;
1314
1315 input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
1316 input_set_abs_params(input_dev, ABS_X,
1317 pdata->x_min ? : 0,
1318 pdata->x_max ? : MAX_12BIT,
1319 0, 0);
1320 input_set_abs_params(input_dev, ABS_Y,
1321 pdata->y_min ? : 0,
1322 pdata->y_max ? : MAX_12BIT,
1323 0, 0);
1324 if (ts->model != 7845)
1325 input_set_abs_params(input_dev, ABS_PRESSURE,
1326 pdata->pressure_min, pdata->pressure_max, 0, 0);
1327
1328 /*
1329 * Parse common framework properties. Must be done here to ensure the
1330 * correct behaviour in case of using the legacy vendor bindings. The
1331 * general binding value overrides the vendor specific one.
1332 */
1333 touchscreen_parse_properties(ts->input, false, &ts->core_prop);
1334 ts->pressure_max = input_abs_get_max(input_dev, ABS_PRESSURE) ? : ~0;
1335
1336 /*
1337 * Check if legacy ti,swap-xy binding is used instead of
1338 * touchscreen-swapped-x-y
1339 */
1340 if (!ts->core_prop.swap_x_y && pdata->swap_xy) {
1341 swap(input_dev->absinfo[ABS_X], input_dev->absinfo[ABS_Y]);
1342 ts->core_prop.swap_x_y = true;
1343 }
1344
1345 ads7846_setup_spi_msg(ts, pdata);
1346
1347 ts->reg = devm_regulator_get(dev, "vcc");
1348 if (IS_ERR(ts->reg)) {
1349 err = PTR_ERR(ts->reg);
1350 dev_err(dev, "unable to get regulator: %d\n", err);
1351 return err;
1352 }
1353
1354 err = regulator_enable(ts->reg);
1355 if (err) {
1356 dev_err(dev, "unable to enable regulator: %d\n", err);
1357 return err;
1358 }
1359
1360 err = devm_add_action_or_reset(dev, ads7846_regulator_disable, ts->reg);
1361 if (err)
1362 return err;
1363
1364 irq_flags = pdata->irq_flags ? : IRQF_TRIGGER_FALLING;
1365 irq_flags |= IRQF_ONESHOT;
1366
1367 err = devm_request_threaded_irq(dev, spi->irq,
1368 ads7846_hard_irq, ads7846_irq,
1369 irq_flags, dev->driver->name, ts);
1370 if (err && err != -EPROBE_DEFER && !pdata->irq_flags) {
1371 dev_info(dev,
1372 "trying pin change workaround on irq %d\n", spi->irq);
1373 irq_flags |= IRQF_TRIGGER_RISING;
1374 err = devm_request_threaded_irq(dev, spi->irq,
1375 ads7846_hard_irq, ads7846_irq,
1376 irq_flags, dev->driver->name,
1377 ts);
1378 }
1379
1380 if (err) {
1381 dev_dbg(dev, "irq %d busy?\n", spi->irq);
1382 return err;
1383 }
1384
1385 err = ads784x_hwmon_register(spi, ts);
1386 if (err)
1387 return err;
1388
1389 dev_info(dev, "touchscreen, irq %d\n", spi->irq);
1390
1391 /*
1392 * Take a first sample, leaving nPENIRQ active and vREF off; avoid
1393 * the touchscreen, in case it's not connected.
1394 */
1395 if (ts->model == 7845)
1396 ads7845_read12_ser(dev, PWRDOWN);
1397 else
1398 (void) ads7846_read12_ser(dev, READ_12BIT_SER(vaux));
1399
1400 err = input_register_device(input_dev);
1401 if (err)
1402 return err;
1403
1404 device_init_wakeup(dev, pdata->wakeup);
1405
1406 /*
1407 * If device does not carry platform data we must have allocated it
1408 * when parsing DT data.
1409 */
1410 if (!dev_get_platdata(dev))
1411 devm_kfree(dev, (void *)pdata);
1412
1413 return 0;
1414 }
1415
ads7846_remove(struct spi_device * spi)1416 static void ads7846_remove(struct spi_device *spi)
1417 {
1418 struct ads7846 *ts = spi_get_drvdata(spi);
1419
1420 ads7846_stop(ts);
1421 }
1422
1423 static struct spi_driver ads7846_driver = {
1424 .driver = {
1425 .name = "ads7846",
1426 .dev_groups = ads784x_groups,
1427 .pm = pm_sleep_ptr(&ads7846_pm),
1428 .of_match_table = ads7846_dt_ids,
1429 },
1430 .probe = ads7846_probe,
1431 .remove = ads7846_remove,
1432 .id_table = ads7846_spi_ids,
1433 };
1434
1435 module_spi_driver(ads7846_driver);
1436
1437 MODULE_DESCRIPTION("ADS7846 TouchScreen Driver");
1438 MODULE_LICENSE("GPL");
1439