xref: /linux/drivers/input/touchscreen/ad7879.c (revision ca55b2fef3a9373fcfc30f82fd26bc7fccbda732)
1 /*
2  * AD7879/AD7889 based touchscreen and GPIO driver
3  *
4  * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc.
5  *
6  * Licensed under the GPL-2 or later.
7  *
8  * History:
9  * Copyright (c) 2005 David Brownell
10  * Copyright (c) 2006 Nokia Corporation
11  * Various changes: Imre Deak <imre.deak@nokia.com>
12  *
13  * Using code from:
14  *  - corgi_ts.c
15  *	Copyright (C) 2004-2005 Richard Purdie
16  *  - omap_ts.[hc], ads7846.h, ts_osk.c
17  *	Copyright (C) 2002 MontaVista Software
18  *	Copyright (C) 2004 Texas Instruments
19  *	Copyright (C) 2005 Dirk Behme
20  *  - ad7877.c
21  *	Copyright (C) 2006-2008 Analog Devices Inc.
22  */
23 
24 #include <linux/device.h>
25 #include <linux/delay.h>
26 #include <linux/input.h>
27 #include <linux/interrupt.h>
28 #include <linux/irq.h>
29 #include <linux/slab.h>
30 #include <linux/spi/spi.h>
31 #include <linux/i2c.h>
32 #include <linux/gpio.h>
33 
34 #include <linux/spi/ad7879.h>
35 #include <linux/module.h>
36 #include "ad7879.h"
37 
38 #define AD7879_REG_ZEROS		0
39 #define AD7879_REG_CTRL1		1
40 #define AD7879_REG_CTRL2		2
41 #define AD7879_REG_CTRL3		3
42 #define AD7879_REG_AUX1HIGH		4
43 #define AD7879_REG_AUX1LOW		5
44 #define AD7879_REG_TEMP1HIGH		6
45 #define AD7879_REG_TEMP1LOW		7
46 #define AD7879_REG_XPLUS		8
47 #define AD7879_REG_YPLUS		9
48 #define AD7879_REG_Z1			10
49 #define AD7879_REG_Z2			11
50 #define AD7879_REG_AUXVBAT		12
51 #define AD7879_REG_TEMP			13
52 #define AD7879_REG_REVID		14
53 
54 /* Control REG 1 */
55 #define AD7879_TMR(x)			((x & 0xFF) << 0)
56 #define AD7879_ACQ(x)			((x & 0x3) << 8)
57 #define AD7879_MODE_NOC			(0 << 10)	/* Do not convert */
58 #define AD7879_MODE_SCC			(1 << 10)	/* Single channel conversion */
59 #define AD7879_MODE_SEQ0		(2 << 10)	/* Sequence 0 in Slave Mode */
60 #define AD7879_MODE_SEQ1		(3 << 10)	/* Sequence 1 in Master Mode */
61 #define AD7879_MODE_INT			(1 << 15)	/* PENIRQ disabled INT enabled */
62 
63 /* Control REG 2 */
64 #define AD7879_FCD(x)			((x & 0x3) << 0)
65 #define AD7879_RESET			(1 << 4)
66 #define AD7879_MFS(x)			((x & 0x3) << 5)
67 #define AD7879_AVG(x)			((x & 0x3) << 7)
68 #define	AD7879_SER			(1 << 9)	/* non-differential */
69 #define	AD7879_DFR			(0 << 9)	/* differential */
70 #define AD7879_GPIOPOL			(1 << 10)
71 #define AD7879_GPIODIR			(1 << 11)
72 #define AD7879_GPIO_DATA		(1 << 12)
73 #define AD7879_GPIO_EN			(1 << 13)
74 #define AD7879_PM(x)			((x & 0x3) << 14)
75 #define AD7879_PM_SHUTDOWN		(0)
76 #define AD7879_PM_DYN			(1)
77 #define AD7879_PM_FULLON		(2)
78 
79 /* Control REG 3 */
80 #define AD7879_TEMPMASK_BIT		(1<<15)
81 #define AD7879_AUXVBATMASK_BIT		(1<<14)
82 #define AD7879_INTMODE_BIT		(1<<13)
83 #define AD7879_GPIOALERTMASK_BIT	(1<<12)
84 #define AD7879_AUXLOW_BIT		(1<<11)
85 #define AD7879_AUXHIGH_BIT		(1<<10)
86 #define AD7879_TEMPLOW_BIT		(1<<9)
87 #define AD7879_TEMPHIGH_BIT		(1<<8)
88 #define AD7879_YPLUS_BIT		(1<<7)
89 #define AD7879_XPLUS_BIT		(1<<6)
90 #define AD7879_Z1_BIT			(1<<5)
91 #define AD7879_Z2_BIT			(1<<4)
92 #define AD7879_AUX_BIT			(1<<3)
93 #define AD7879_VBAT_BIT			(1<<2)
94 #define AD7879_TEMP_BIT			(1<<1)
95 
96 enum {
97 	AD7879_SEQ_XPOS  = 0,
98 	AD7879_SEQ_YPOS  = 1,
99 	AD7879_SEQ_Z1    = 2,
100 	AD7879_SEQ_Z2    = 3,
101 	AD7879_NR_SENSE  = 4,
102 };
103 
104 #define	MAX_12BIT			((1<<12)-1)
105 #define	TS_PEN_UP_TIMEOUT		msecs_to_jiffies(50)
106 
107 struct ad7879 {
108 	const struct ad7879_bus_ops *bops;
109 
110 	struct device		*dev;
111 	struct input_dev	*input;
112 	struct timer_list	timer;
113 #ifdef CONFIG_GPIOLIB
114 	struct gpio_chip	gc;
115 	struct mutex		mutex;
116 #endif
117 	unsigned int		irq;
118 	bool			disabled;	/* P: input->mutex */
119 	bool			suspended;	/* P: input->mutex */
120 	bool			swap_xy;
121 	u16			conversion_data[AD7879_NR_SENSE];
122 	char			phys[32];
123 	u8			first_conversion_delay;
124 	u8			acquisition_time;
125 	u8			averaging;
126 	u8			pen_down_acc_interval;
127 	u8			median;
128 	u16			x_plate_ohms;
129 	u16			pressure_max;
130 	u16			cmd_crtl1;
131 	u16			cmd_crtl2;
132 	u16			cmd_crtl3;
133 	int			x;
134 	int			y;
135 	int			Rt;
136 };
137 
138 static int ad7879_read(struct ad7879 *ts, u8 reg)
139 {
140 	return ts->bops->read(ts->dev, reg);
141 }
142 
143 static int ad7879_multi_read(struct ad7879 *ts, u8 first_reg, u8 count, u16 *buf)
144 {
145 	return ts->bops->multi_read(ts->dev, first_reg, count, buf);
146 }
147 
148 static int ad7879_write(struct ad7879 *ts, u8 reg, u16 val)
149 {
150 	return ts->bops->write(ts->dev, reg, val);
151 }
152 
153 static int ad7879_report(struct ad7879 *ts)
154 {
155 	struct input_dev *input_dev = ts->input;
156 	unsigned Rt;
157 	u16 x, y, z1, z2;
158 
159 	x = ts->conversion_data[AD7879_SEQ_XPOS] & MAX_12BIT;
160 	y = ts->conversion_data[AD7879_SEQ_YPOS] & MAX_12BIT;
161 	z1 = ts->conversion_data[AD7879_SEQ_Z1] & MAX_12BIT;
162 	z2 = ts->conversion_data[AD7879_SEQ_Z2] & MAX_12BIT;
163 
164 	if (ts->swap_xy)
165 		swap(x, y);
166 
167 	/*
168 	 * The samples processed here are already preprocessed by the AD7879.
169 	 * The preprocessing function consists of a median and an averaging
170 	 * filter.  The combination of these two techniques provides a robust
171 	 * solution, discarding the spurious noise in the signal and keeping
172 	 * only the data of interest.  The size of both filters is
173 	 * programmable. (dev.platform_data, see linux/spi/ad7879.h) Other
174 	 * user-programmable conversion controls include variable acquisition
175 	 * time, and first conversion delay. Up to 16 averages can be taken
176 	 * per conversion.
177 	 */
178 
179 	if (likely(x && z1)) {
180 		/* compute touch pressure resistance using equation #1 */
181 		Rt = (z2 - z1) * x * ts->x_plate_ohms;
182 		Rt /= z1;
183 		Rt = (Rt + 2047) >> 12;
184 
185 		/*
186 		 * Sample found inconsistent, pressure is beyond
187 		 * the maximum. Don't report it to user space.
188 		 */
189 		if (Rt > ts->pressure_max)
190 			return -EINVAL;
191 
192 		/*
193 		 * Note that we delay reporting events by one sample.
194 		 * This is done to avoid reporting last sample of the
195 		 * touch sequence, which may be incomplete if finger
196 		 * leaves the surface before last reading is taken.
197 		 */
198 		if (timer_pending(&ts->timer)) {
199 			/* Touch continues */
200 			input_report_key(input_dev, BTN_TOUCH, 1);
201 			input_report_abs(input_dev, ABS_X, ts->x);
202 			input_report_abs(input_dev, ABS_Y, ts->y);
203 			input_report_abs(input_dev, ABS_PRESSURE, ts->Rt);
204 			input_sync(input_dev);
205 		}
206 
207 		ts->x = x;
208 		ts->y = y;
209 		ts->Rt = Rt;
210 
211 		return 0;
212 	}
213 
214 	return -EINVAL;
215 }
216 
217 static void ad7879_ts_event_release(struct ad7879 *ts)
218 {
219 	struct input_dev *input_dev = ts->input;
220 
221 	input_report_abs(input_dev, ABS_PRESSURE, 0);
222 	input_report_key(input_dev, BTN_TOUCH, 0);
223 	input_sync(input_dev);
224 }
225 
226 static void ad7879_timer(unsigned long handle)
227 {
228 	struct ad7879 *ts = (void *)handle;
229 
230 	ad7879_ts_event_release(ts);
231 }
232 
233 static irqreturn_t ad7879_irq(int irq, void *handle)
234 {
235 	struct ad7879 *ts = handle;
236 
237 	ad7879_multi_read(ts, AD7879_REG_XPLUS, AD7879_NR_SENSE, ts->conversion_data);
238 
239 	if (!ad7879_report(ts))
240 		mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT);
241 
242 	return IRQ_HANDLED;
243 }
244 
245 static void __ad7879_enable(struct ad7879 *ts)
246 {
247 	ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2);
248 	ad7879_write(ts, AD7879_REG_CTRL3, ts->cmd_crtl3);
249 	ad7879_write(ts, AD7879_REG_CTRL1, ts->cmd_crtl1);
250 
251 	enable_irq(ts->irq);
252 }
253 
254 static void __ad7879_disable(struct ad7879 *ts)
255 {
256 	u16 reg = (ts->cmd_crtl2 & ~AD7879_PM(-1)) |
257 		AD7879_PM(AD7879_PM_SHUTDOWN);
258 	disable_irq(ts->irq);
259 
260 	if (del_timer_sync(&ts->timer))
261 		ad7879_ts_event_release(ts);
262 
263 	ad7879_write(ts, AD7879_REG_CTRL2, reg);
264 }
265 
266 
267 static int ad7879_open(struct input_dev *input)
268 {
269 	struct ad7879 *ts = input_get_drvdata(input);
270 
271 	/* protected by input->mutex */
272 	if (!ts->disabled && !ts->suspended)
273 		__ad7879_enable(ts);
274 
275 	return 0;
276 }
277 
278 static void ad7879_close(struct input_dev* input)
279 {
280 	struct ad7879 *ts = input_get_drvdata(input);
281 
282 	/* protected by input->mutex */
283 	if (!ts->disabled && !ts->suspended)
284 		__ad7879_disable(ts);
285 }
286 
287 static int __maybe_unused ad7879_suspend(struct device *dev)
288 {
289 	struct ad7879 *ts = dev_get_drvdata(dev);
290 
291 	mutex_lock(&ts->input->mutex);
292 
293 	if (!ts->suspended && !ts->disabled && ts->input->users)
294 		__ad7879_disable(ts);
295 
296 	ts->suspended = true;
297 
298 	mutex_unlock(&ts->input->mutex);
299 
300 	return 0;
301 }
302 
303 static int __maybe_unused ad7879_resume(struct device *dev)
304 {
305 	struct ad7879 *ts = dev_get_drvdata(dev);
306 
307 	mutex_lock(&ts->input->mutex);
308 
309 	if (ts->suspended && !ts->disabled && ts->input->users)
310 		__ad7879_enable(ts);
311 
312 	ts->suspended = false;
313 
314 	mutex_unlock(&ts->input->mutex);
315 
316 	return 0;
317 }
318 
319 SIMPLE_DEV_PM_OPS(ad7879_pm_ops, ad7879_suspend, ad7879_resume);
320 EXPORT_SYMBOL(ad7879_pm_ops);
321 
322 static void ad7879_toggle(struct ad7879 *ts, bool disable)
323 {
324 	mutex_lock(&ts->input->mutex);
325 
326 	if (!ts->suspended && ts->input->users != 0) {
327 
328 		if (disable) {
329 			if (ts->disabled)
330 				__ad7879_enable(ts);
331 		} else {
332 			if (!ts->disabled)
333 				__ad7879_disable(ts);
334 		}
335 	}
336 
337 	ts->disabled = disable;
338 
339 	mutex_unlock(&ts->input->mutex);
340 }
341 
342 static ssize_t ad7879_disable_show(struct device *dev,
343 				     struct device_attribute *attr, char *buf)
344 {
345 	struct ad7879 *ts = dev_get_drvdata(dev);
346 
347 	return sprintf(buf, "%u\n", ts->disabled);
348 }
349 
350 static ssize_t ad7879_disable_store(struct device *dev,
351 				     struct device_attribute *attr,
352 				     const char *buf, size_t count)
353 {
354 	struct ad7879 *ts = dev_get_drvdata(dev);
355 	unsigned int val;
356 	int error;
357 
358 	error = kstrtouint(buf, 10, &val);
359 	if (error)
360 		return error;
361 
362 	ad7879_toggle(ts, val);
363 
364 	return count;
365 }
366 
367 static DEVICE_ATTR(disable, 0664, ad7879_disable_show, ad7879_disable_store);
368 
369 static struct attribute *ad7879_attributes[] = {
370 	&dev_attr_disable.attr,
371 	NULL
372 };
373 
374 static const struct attribute_group ad7879_attr_group = {
375 	.attrs = ad7879_attributes,
376 };
377 
378 #ifdef CONFIG_GPIOLIB
379 static int ad7879_gpio_direction_input(struct gpio_chip *chip,
380 					unsigned gpio)
381 {
382 	struct ad7879 *ts = container_of(chip, struct ad7879, gc);
383 	int err;
384 
385 	mutex_lock(&ts->mutex);
386 	ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIODIR | AD7879_GPIOPOL;
387 	err = ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2);
388 	mutex_unlock(&ts->mutex);
389 
390 	return err;
391 }
392 
393 static int ad7879_gpio_direction_output(struct gpio_chip *chip,
394 					unsigned gpio, int level)
395 {
396 	struct ad7879 *ts = container_of(chip, struct ad7879, gc);
397 	int err;
398 
399 	mutex_lock(&ts->mutex);
400 	ts->cmd_crtl2 &= ~AD7879_GPIODIR;
401 	ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIOPOL;
402 	if (level)
403 		ts->cmd_crtl2 |= AD7879_GPIO_DATA;
404 	else
405 		ts->cmd_crtl2 &= ~AD7879_GPIO_DATA;
406 
407 	err = ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2);
408 	mutex_unlock(&ts->mutex);
409 
410 	return err;
411 }
412 
413 static int ad7879_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
414 {
415 	struct ad7879 *ts = container_of(chip, struct ad7879, gc);
416 	u16 val;
417 
418 	mutex_lock(&ts->mutex);
419 	val = ad7879_read(ts, AD7879_REG_CTRL2);
420 	mutex_unlock(&ts->mutex);
421 
422 	return !!(val & AD7879_GPIO_DATA);
423 }
424 
425 static void ad7879_gpio_set_value(struct gpio_chip *chip,
426 				  unsigned gpio, int value)
427 {
428 	struct ad7879 *ts = container_of(chip, struct ad7879, gc);
429 
430 	mutex_lock(&ts->mutex);
431 	if (value)
432 		ts->cmd_crtl2 |= AD7879_GPIO_DATA;
433 	else
434 		ts->cmd_crtl2 &= ~AD7879_GPIO_DATA;
435 
436 	ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2);
437 	mutex_unlock(&ts->mutex);
438 }
439 
440 static int ad7879_gpio_add(struct ad7879 *ts,
441 			   const struct ad7879_platform_data *pdata)
442 {
443 	int ret = 0;
444 
445 	mutex_init(&ts->mutex);
446 
447 	if (pdata->gpio_export) {
448 		ts->gc.direction_input = ad7879_gpio_direction_input;
449 		ts->gc.direction_output = ad7879_gpio_direction_output;
450 		ts->gc.get = ad7879_gpio_get_value;
451 		ts->gc.set = ad7879_gpio_set_value;
452 		ts->gc.can_sleep = 1;
453 		ts->gc.base = pdata->gpio_base;
454 		ts->gc.ngpio = 1;
455 		ts->gc.label = "AD7879-GPIO";
456 		ts->gc.owner = THIS_MODULE;
457 		ts->gc.dev = ts->dev;
458 
459 		ret = gpiochip_add(&ts->gc);
460 		if (ret)
461 			dev_err(ts->dev, "failed to register gpio %d\n",
462 				ts->gc.base);
463 	}
464 
465 	return ret;
466 }
467 
468 static void ad7879_gpio_remove(struct ad7879 *ts)
469 {
470 	const struct ad7879_platform_data *pdata = dev_get_platdata(ts->dev);
471 
472 	if (pdata->gpio_export)
473 		gpiochip_remove(&ts->gc);
474 
475 }
476 #else
477 static inline int ad7879_gpio_add(struct ad7879 *ts,
478 				  const struct ad7879_platform_data *pdata)
479 {
480 	return 0;
481 }
482 
483 static inline void ad7879_gpio_remove(struct ad7879 *ts)
484 {
485 }
486 #endif
487 
488 struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq,
489 			    const struct ad7879_bus_ops *bops)
490 {
491 	struct ad7879_platform_data *pdata = dev_get_platdata(dev);
492 	struct ad7879 *ts;
493 	struct input_dev *input_dev;
494 	int err;
495 	u16 revid;
496 
497 	if (!irq) {
498 		dev_err(dev, "no IRQ?\n");
499 		err = -EINVAL;
500 		goto err_out;
501 	}
502 
503 	if (!pdata) {
504 		dev_err(dev, "no platform data?\n");
505 		err = -EINVAL;
506 		goto err_out;
507 	}
508 
509 	ts = kzalloc(sizeof(*ts), GFP_KERNEL);
510 	input_dev = input_allocate_device();
511 	if (!ts || !input_dev) {
512 		err = -ENOMEM;
513 		goto err_free_mem;
514 	}
515 
516 	ts->bops = bops;
517 	ts->dev = dev;
518 	ts->input = input_dev;
519 	ts->irq = irq;
520 	ts->swap_xy = pdata->swap_xy;
521 
522 	setup_timer(&ts->timer, ad7879_timer, (unsigned long) ts);
523 
524 	ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
525 	ts->pressure_max = pdata->pressure_max ? : ~0;
526 
527 	ts->first_conversion_delay = pdata->first_conversion_delay;
528 	ts->acquisition_time = pdata->acquisition_time;
529 	ts->averaging = pdata->averaging;
530 	ts->pen_down_acc_interval = pdata->pen_down_acc_interval;
531 	ts->median = pdata->median;
532 
533 	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev));
534 
535 	input_dev->name = "AD7879 Touchscreen";
536 	input_dev->phys = ts->phys;
537 	input_dev->dev.parent = dev;
538 	input_dev->id.bustype = bops->bustype;
539 
540 	input_dev->open = ad7879_open;
541 	input_dev->close = ad7879_close;
542 
543 	input_set_drvdata(input_dev, ts);
544 
545 	__set_bit(EV_ABS, input_dev->evbit);
546 	__set_bit(ABS_X, input_dev->absbit);
547 	__set_bit(ABS_Y, input_dev->absbit);
548 	__set_bit(ABS_PRESSURE, input_dev->absbit);
549 
550 	__set_bit(EV_KEY, input_dev->evbit);
551 	__set_bit(BTN_TOUCH, input_dev->keybit);
552 
553 	input_set_abs_params(input_dev, ABS_X,
554 			pdata->x_min ? : 0,
555 			pdata->x_max ? : MAX_12BIT,
556 			0, 0);
557 	input_set_abs_params(input_dev, ABS_Y,
558 			pdata->y_min ? : 0,
559 			pdata->y_max ? : MAX_12BIT,
560 			0, 0);
561 	input_set_abs_params(input_dev, ABS_PRESSURE,
562 			pdata->pressure_min, pdata->pressure_max, 0, 0);
563 
564 	err = ad7879_write(ts, AD7879_REG_CTRL2, AD7879_RESET);
565 	if (err < 0) {
566 		dev_err(dev, "Failed to write %s\n", input_dev->name);
567 		goto err_free_mem;
568 	}
569 
570 	revid = ad7879_read(ts, AD7879_REG_REVID);
571 	input_dev->id.product = (revid & 0xff);
572 	input_dev->id.version = revid >> 8;
573 	if (input_dev->id.product != devid) {
574 		dev_err(dev, "Failed to probe %s (%x vs %x)\n",
575 			input_dev->name, devid, revid);
576 		err = -ENODEV;
577 		goto err_free_mem;
578 	}
579 
580 	ts->cmd_crtl3 = AD7879_YPLUS_BIT |
581 			AD7879_XPLUS_BIT |
582 			AD7879_Z2_BIT |
583 			AD7879_Z1_BIT |
584 			AD7879_TEMPMASK_BIT |
585 			AD7879_AUXVBATMASK_BIT |
586 			AD7879_GPIOALERTMASK_BIT;
587 
588 	ts->cmd_crtl2 = AD7879_PM(AD7879_PM_DYN) | AD7879_DFR |
589 			AD7879_AVG(ts->averaging) |
590 			AD7879_MFS(ts->median) |
591 			AD7879_FCD(ts->first_conversion_delay);
592 
593 	ts->cmd_crtl1 = AD7879_MODE_INT | AD7879_MODE_SEQ1 |
594 			AD7879_ACQ(ts->acquisition_time) |
595 			AD7879_TMR(ts->pen_down_acc_interval);
596 
597 	err = request_threaded_irq(ts->irq, NULL, ad7879_irq,
598 				   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
599 				   dev_name(dev), ts);
600 	if (err) {
601 		dev_err(dev, "irq %d busy?\n", ts->irq);
602 		goto err_free_mem;
603 	}
604 
605 	__ad7879_disable(ts);
606 
607 	err = sysfs_create_group(&dev->kobj, &ad7879_attr_group);
608 	if (err)
609 		goto err_free_irq;
610 
611 	err = ad7879_gpio_add(ts, pdata);
612 	if (err)
613 		goto err_remove_attr;
614 
615 	err = input_register_device(input_dev);
616 	if (err)
617 		goto err_remove_gpio;
618 
619 	return ts;
620 
621 err_remove_gpio:
622 	ad7879_gpio_remove(ts);
623 err_remove_attr:
624 	sysfs_remove_group(&dev->kobj, &ad7879_attr_group);
625 err_free_irq:
626 	free_irq(ts->irq, ts);
627 err_free_mem:
628 	input_free_device(input_dev);
629 	kfree(ts);
630 err_out:
631 	return ERR_PTR(err);
632 }
633 EXPORT_SYMBOL(ad7879_probe);
634 
635 void ad7879_remove(struct ad7879 *ts)
636 {
637 	ad7879_gpio_remove(ts);
638 	sysfs_remove_group(&ts->dev->kobj, &ad7879_attr_group);
639 	free_irq(ts->irq, ts);
640 	input_unregister_device(ts->input);
641 	kfree(ts);
642 }
643 EXPORT_SYMBOL(ad7879_remove);
644 
645 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
646 MODULE_DESCRIPTION("AD7879(-1) touchscreen Driver");
647 MODULE_LICENSE("GPL");
648