1# 2# Touchscreen driver configuration 3# 4menuconfig INPUT_TOUCHSCREEN 5 bool "Touchscreens" 6 help 7 Say Y here, and a list of supported touchscreens will be displayed. 8 This option doesn't affect the kernel. 9 10 If unsure, say Y. 11 12if INPUT_TOUCHSCREEN 13 14config TOUCHSCREEN_ADS7846 15 tristate "ADS7846/TSC2046 and ADS7843 based touchscreens" 16 depends on SPI_MASTER 17 depends on HWMON = n || HWMON 18 help 19 Say Y here if you have a touchscreen interface using the 20 ADS7846/TSC2046 or ADS7843 controller, and your board-specific 21 setup code includes that in its table of SPI devices. 22 23 If HWMON is selected, and the driver is told the reference voltage 24 on your board, you will also get hwmon interfaces for the voltage 25 (and on ads7846/tsc2046, temperature) sensors of this chip. 26 27 If unsure, say N (but it's safe to say "Y"). 28 29 To compile this driver as a module, choose M here: the 30 module will be called ads7846. 31 32config TOUCHSCREEN_BITSY 33 tristate "Compaq iPAQ H3600 (Bitsy) touchscreen" 34 depends on SA1100_BITSY 35 select SERIO 36 help 37 Say Y here if you have the h3600 (Bitsy) touchscreen. 38 39 If unsure, say N. 40 41 To compile this driver as a module, choose M here: the 42 module will be called h3600_ts_input. 43 44config TOUCHSCREEN_CORGI 45 tristate "SharpSL (Corgi and Spitz series) touchscreen driver" 46 depends on PXA_SHARPSL 47 default y 48 help 49 Say Y here to enable the driver for the touchscreen on the 50 Sharp SL-C7xx and SL-Cxx00 series of PDAs. 51 52 If unsure, say N. 53 54 To compile this driver as a module, choose M here: the 55 module will be called corgi_ts. 56 57config TOUCHSCREEN_FUJITSU 58 tristate "Fujitsu serial touchscreen" 59 select SERIO 60 help 61 Say Y here if you have the Fujitsu touchscreen (such as one 62 installed in Lifebook P series laptop) connected to your 63 system. 64 65 If unsure, say N. 66 67 To compile this driver as a module, choose M here: the 68 module will be called fujitsu-ts. 69 70config TOUCHSCREEN_GUNZE 71 tristate "Gunze AHL-51S touchscreen" 72 select SERIO 73 help 74 Say Y here if you have the Gunze AHL-51 touchscreen connected to 75 your system. 76 77 If unsure, say N. 78 79 To compile this driver as a module, choose M here: the 80 module will be called gunze. 81 82config TOUCHSCREEN_ELO 83 tristate "Elo serial touchscreens" 84 select SERIO 85 help 86 Say Y here if you have an Elo serial touchscreen connected to 87 your system. 88 89 If unsure, say N. 90 91 To compile this driver as a module, choose M here: the 92 module will be called elo. 93 94config TOUCHSCREEN_MTOUCH 95 tristate "MicroTouch serial touchscreens" 96 select SERIO 97 help 98 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to 99 your system. 100 101 If unsure, say N. 102 103 To compile this driver as a module, choose M here: the 104 module will be called mtouch. 105 106config TOUCHSCREEN_MK712 107 tristate "ICS MicroClock MK712 touchscreen" 108 help 109 Say Y here if you have the ICS MicroClock MK712 touchscreen 110 controller chip in your system. 111 112 If unsure, say N. 113 114 To compile this driver as a module, choose M here: the 115 module will be called mk712. 116 117config TOUCHSCREEN_HP600 118 tristate "HP Jornada 680/690 touchscreen" 119 depends on SH_HP6XX && SH_ADC 120 help 121 Say Y here if you have a HP Jornada 680 or 690 and want to 122 support the built-in touchscreen. 123 124 If unsure, say N. 125 126 To compile this driver as a module, choose M here: the 127 module will be called hp680_ts_input. 128 129config TOUCHSCREEN_PENMOUNT 130 tristate "Penmount serial touchscreen" 131 select SERIO 132 help 133 Say Y here if you have a Penmount serial touchscreen connected to 134 your system. 135 136 If unsure, say N. 137 138 To compile this driver as a module, choose M here: the 139 module will be called penmount. 140 141config TOUCHSCREEN_TOUCHRIGHT 142 tristate "Touchright serial touchscreen" 143 select SERIO 144 help 145 Say Y here if you have a Touchright serial touchscreen connected to 146 your system. 147 148 If unsure, say N. 149 150 To compile this driver as a module, choose M here: the 151 module will be called touchright. 152 153config TOUCHSCREEN_TOUCHWIN 154 tristate "Touchwin serial touchscreen" 155 select SERIO 156 help 157 Say Y here if you have a Touchwin serial touchscreen connected to 158 your system. 159 160 If unsure, say N. 161 162 To compile this driver as a module, choose M here: the 163 module will be called touchwin. 164 165config TOUCHSCREEN_UCB1400 166 tristate "Philips UCB1400 touchscreen" 167 select AC97_BUS 168 help 169 This enables support for the Philips UCB1400 touchscreen interface. 170 The UCB1400 is an AC97 audio codec. The touchscreen interface 171 will be initialized only after the ALSA subsystem has been 172 brought up and the UCB1400 detected. You therefore have to 173 configure ALSA support as well (either built-in or modular, 174 independently of whether this driver is itself built-in or 175 modular) for this driver to work. 176 177 To compile this driver as a module, choose M here: the 178 module will be called ucb1400_ts. 179 180config TOUCHSCREEN_USB_COMPOSITE 181 tristate "USB Touchscreen Driver" 182 depends on USB_ARCH_HAS_HCD 183 select USB 184 help 185 USB Touchscreen driver for: 186 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700) 187 - PanJit TouchSet USB 188 - 3M MicroTouch USB (EX II series) 189 - ITM 190 - some other eTurboTouch 191 - Gunze AHL61 192 - DMC TSC-10/25 193 - IRTOUCHSYSTEMS/UNITOP 194 - IdealTEK URTC1000 195 196 Have a look at <http://linux.chapter7.ch/touchkit/> for 197 a usage description and the required user-space stuff. 198 199 To compile this driver as a module, choose M here: the 200 module will be called usbtouchscreen. 201 202config TOUCHSCREEN_USB_EGALAX 203 default y 204 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED 205 depends on TOUCHSCREEN_USB_COMPOSITE 206 207config TOUCHSCREEN_USB_PANJIT 208 default y 209 bool "PanJit device support" if EMBEDDED 210 depends on TOUCHSCREEN_USB_COMPOSITE 211 212config TOUCHSCREEN_USB_3M 213 default y 214 bool "3M/Microtouch EX II series device support" if EMBEDDED 215 depends on TOUCHSCREEN_USB_COMPOSITE 216 217config TOUCHSCREEN_USB_ITM 218 default y 219 bool "ITM device support" if EMBEDDED 220 depends on TOUCHSCREEN_USB_COMPOSITE 221 222config TOUCHSCREEN_USB_ETURBO 223 default y 224 bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED 225 depends on TOUCHSCREEN_USB_COMPOSITE 226 227config TOUCHSCREEN_USB_GUNZE 228 default y 229 bool "Gunze AHL61 device support" if EMBEDDED 230 depends on TOUCHSCREEN_USB_COMPOSITE 231 232config TOUCHSCREEN_USB_DMC_TSC10 233 default y 234 bool "DMC TSC-10/25 device support" if EMBEDDED 235 depends on TOUCHSCREEN_USB_COMPOSITE 236 237config TOUCHSCREEN_USB_IRTOUCH 238 default y 239 bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED 240 depends on TOUCHSCREEN_USB_COMPOSITE 241 242config TOUCHSCREEN_USB_IDEALTEK 243 default y 244 bool "IdealTEK URTC1000 device support" if EMBEDDED 245 depends on TOUCHSCREEN_USB_COMPOSITE 246 247endif 248