1# 2# Touchscreen driver configuration 3# 4menuconfig INPUT_TOUCHSCREEN 5 bool "Touchscreens" 6 help 7 Say Y here, and a list of supported touchscreens will be displayed. 8 This option doesn't affect the kernel. 9 10 If unsure, say Y. 11 12if INPUT_TOUCHSCREEN 13 14config TOUCHSCREEN_ADS7846 15 tristate "ADS7846/TSC2046 and ADS7843 based touchscreens" 16 depends on SPI_MASTER 17 depends on HWMON = n || HWMON 18 help 19 Say Y here if you have a touchscreen interface using the 20 ADS7846/TSC2046 or ADS7843 controller, and your board-specific 21 setup code includes that in its table of SPI devices. 22 23 If HWMON is selected, and the driver is told the reference voltage 24 on your board, you will also get hwmon interfaces for the voltage 25 (and on ads7846/tsc2046, temperature) sensors of this chip. 26 27 If unsure, say N (but it's safe to say "Y"). 28 29 To compile this driver as a module, choose M here: the 30 module will be called ads7846. 31 32config TOUCHSCREEN_BITSY 33 tristate "Compaq iPAQ H3600 (Bitsy) touchscreen" 34 depends on SA1100_BITSY 35 select SERIO 36 help 37 Say Y here if you have the h3600 (Bitsy) touchscreen. 38 39 If unsure, say N. 40 41 To compile this driver as a module, choose M here: the 42 module will be called h3600_ts_input. 43 44config TOUCHSCREEN_CORGI 45 tristate "SharpSL (Corgi and Spitz series) touchscreen driver" 46 depends on PXA_SHARPSL 47 default y 48 help 49 Say Y here to enable the driver for the touchscreen on the 50 Sharp SL-C7xx and SL-Cxx00 series of PDAs. 51 52 If unsure, say N. 53 54 To compile this driver as a module, choose M here: the 55 module will be called corgi_ts. 56 57config TOUCHSCREEN_FUJITSU 58 tristate "Fujitsu serial touchscreen" 59 select SERIO 60 help 61 Say Y here if you have the Fujitsu touchscreen (such as one 62 installed in Lifebook P series laptop) connected to your 63 system. 64 65 If unsure, say N. 66 67 To compile this driver as a module, choose M here: the 68 module will be called fujitsu-ts. 69 70config TOUCHSCREEN_GUNZE 71 tristate "Gunze AHL-51S touchscreen" 72 select SERIO 73 help 74 Say Y here if you have the Gunze AHL-51 touchscreen connected to 75 your system. 76 77 If unsure, say N. 78 79 To compile this driver as a module, choose M here: the 80 module will be called gunze. 81 82config TOUCHSCREEN_ELO 83 tristate "Elo serial touchscreens" 84 select SERIO 85 help 86 Say Y here if you have an Elo serial touchscreen connected to 87 your system. 88 89 If unsure, say N. 90 91 To compile this driver as a module, choose M here: the 92 module will be called elo. 93 94config TOUCHSCREEN_MTOUCH 95 tristate "MicroTouch serial touchscreens" 96 select SERIO 97 help 98 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to 99 your system. 100 101 If unsure, say N. 102 103 To compile this driver as a module, choose M here: the 104 module will be called mtouch. 105 106config TOUCHSCREEN_MK712 107 tristate "ICS MicroClock MK712 touchscreen" 108 help 109 Say Y here if you have the ICS MicroClock MK712 touchscreen 110 controller chip in your system. 111 112 If unsure, say N. 113 114 To compile this driver as a module, choose M here: the 115 module will be called mk712. 116 117config TOUCHSCREEN_HP600 118 tristate "HP Jornada 6xx touchscreen" 119 depends on SH_HP6XX && SH_ADC 120 help 121 Say Y here if you have a HP Jornada 620/660/680/690 and want to 122 support the built-in touchscreen. 123 124 To compile this driver as a module, choose M here: the 125 module will be called hp680_ts_input. 126 127config TOUCHSCREEN_HP7XX 128 tristate "HP Jornada 7xx touchscreen" 129 depends on SA1100_JORNADA720_SSP 130 help 131 Say Y here if you have a HP Jornada 710/720/728 and want 132 to support the built-in touchscreen. 133 134 To compile this driver as a module, choose M here: the 135 module will be called jornada720_ts. 136 137config TOUCHSCREEN_PENMOUNT 138 tristate "Penmount serial touchscreen" 139 select SERIO 140 help 141 Say Y here if you have a Penmount serial touchscreen connected to 142 your system. 143 144 If unsure, say N. 145 146 To compile this driver as a module, choose M here: the 147 module will be called penmount. 148 149config TOUCHSCREEN_MIGOR 150 tristate "Renesas MIGO-R touchscreen" 151 depends on SH_MIGOR && I2C 152 help 153 Say Y here to enable MIGO-R touchscreen support. 154 155 If unsure, say N. 156 157 To compile this driver as a module, choose M here: the 158 module will be called migor_ts. 159 160config TOUCHSCREEN_TOUCHRIGHT 161 tristate "Touchright serial touchscreen" 162 select SERIO 163 help 164 Say Y here if you have a Touchright serial touchscreen connected to 165 your system. 166 167 If unsure, say N. 168 169 To compile this driver as a module, choose M here: the 170 module will be called touchright. 171 172config TOUCHSCREEN_TOUCHWIN 173 tristate "Touchwin serial touchscreen" 174 select SERIO 175 help 176 Say Y here if you have a Touchwin serial touchscreen connected to 177 your system. 178 179 If unsure, say N. 180 181 To compile this driver as a module, choose M here: the 182 module will be called touchwin. 183 184config TOUCHSCREEN_UCB1400 185 tristate "Philips UCB1400 touchscreen" 186 select AC97_BUS 187 help 188 This enables support for the Philips UCB1400 touchscreen interface. 189 The UCB1400 is an AC97 audio codec. The touchscreen interface 190 will be initialized only after the ALSA subsystem has been 191 brought up and the UCB1400 detected. You therefore have to 192 configure ALSA support as well (either built-in or modular, 193 independently of whether this driver is itself built-in or 194 modular) for this driver to work. 195 196 To compile this driver as a module, choose M here: the 197 module will be called ucb1400_ts. 198 199config TOUCHSCREEN_WM97XX 200 tristate "Support for WM97xx AC97 touchscreen controllers" 201 depends on AC97_BUS 202 help 203 Say Y here if you have a Wolfson Microelectronics WM97xx 204 touchscreen connected to your system. Note that this option 205 only enables core driver, you will also need to select 206 support for appropriate chip below. 207 208 If unsure, say N. 209 210 To compile this driver as a module, choose M here: the 211 module will be called wm97xx-ts. 212 213config TOUCHSCREEN_WM9705 214 bool "WM9705 Touchscreen interface support" 215 depends on TOUCHSCREEN_WM97XX 216 help 217 Say Y here if you have a Wolfson Microelectronics WM9705 218 touchscreen controller connected to your system. 219 220 If unsure, say N. 221 222config TOUCHSCREEN_WM9712 223 bool "WM9712 Touchscreen interface support" 224 depends on TOUCHSCREEN_WM97XX 225 help 226 Say Y here if you have a Wolfson Microelectronics WM9712 227 touchscreen controller connected to your system. 228 229 If unsure, say N. 230 231config TOUCHSCREEN_WM9713 232 bool "WM9713 Touchscreen interface support" 233 depends on TOUCHSCREEN_WM97XX 234 help 235 Say Y here if you have a Wolfson Microelectronics WM9713 touchscreen 236 controller connected to your system. 237 238 If unsure, say N. 239 240config TOUCHSCREEN_WM97XX_MAINSTONE 241 tristate "WM97xx Mainstone accelerated touch" 242 depends on TOUCHSCREEN_WM97XX && ARCH_PXA 243 help 244 Say Y here for support for streaming mode with WM97xx touchscreens 245 on Mainstone systems. 246 247 If unsure, say N. 248 249 To compile this driver as a module, choose M here: the 250 module will be called mainstone-wm97xx. 251 252config TOUCHSCREEN_USB_COMPOSITE 253 tristate "USB Touchscreen Driver" 254 depends on USB_ARCH_HAS_HCD 255 select USB 256 help 257 USB Touchscreen driver for: 258 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700) 259 - PanJit TouchSet USB 260 - 3M MicroTouch USB (EX II series) 261 - ITM 262 - some other eTurboTouch 263 - Gunze AHL61 264 - DMC TSC-10/25 265 - IRTOUCHSYSTEMS/UNITOP 266 - IdealTEK URTC1000 267 - GoTop Super_Q2/GogoPen/PenPower tablets 268 269 Have a look at <http://linux.chapter7.ch/touchkit/> for 270 a usage description and the required user-space stuff. 271 272 To compile this driver as a module, choose M here: the 273 module will be called usbtouchscreen. 274 275config TOUCHSCREEN_USB_EGALAX 276 default y 277 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED 278 depends on TOUCHSCREEN_USB_COMPOSITE 279 280config TOUCHSCREEN_USB_PANJIT 281 default y 282 bool "PanJit device support" if EMBEDDED 283 depends on TOUCHSCREEN_USB_COMPOSITE 284 285config TOUCHSCREEN_USB_3M 286 default y 287 bool "3M/Microtouch EX II series device support" if EMBEDDED 288 depends on TOUCHSCREEN_USB_COMPOSITE 289 290config TOUCHSCREEN_USB_ITM 291 default y 292 bool "ITM device support" if EMBEDDED 293 depends on TOUCHSCREEN_USB_COMPOSITE 294 295config TOUCHSCREEN_USB_ETURBO 296 default y 297 bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED 298 depends on TOUCHSCREEN_USB_COMPOSITE 299 300config TOUCHSCREEN_USB_GUNZE 301 default y 302 bool "Gunze AHL61 device support" if EMBEDDED 303 depends on TOUCHSCREEN_USB_COMPOSITE 304 305config TOUCHSCREEN_USB_DMC_TSC10 306 default y 307 bool "DMC TSC-10/25 device support" if EMBEDDED 308 depends on TOUCHSCREEN_USB_COMPOSITE 309 310config TOUCHSCREEN_USB_IRTOUCH 311 default y 312 bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED 313 depends on TOUCHSCREEN_USB_COMPOSITE 314 315config TOUCHSCREEN_USB_IDEALTEK 316 default y 317 bool "IdealTEK URTC1000 device support" if EMBEDDED 318 depends on TOUCHSCREEN_USB_COMPOSITE 319 320config TOUCHSCREEN_USB_GENERAL_TOUCH 321 default y 322 bool "GeneralTouch Touchscreen device support" if EMBEDDED 323 depends on TOUCHSCREEN_USB_COMPOSITE 324 325config TOUCHSCREEN_USB_GOTOP 326 default y 327 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED 328 depends on TOUCHSCREEN_USB_COMPOSITE 329 330endif 331