1# 2# Touchscreen driver configuration 3# 4menuconfig INPUT_TOUCHSCREEN 5 bool "Touchscreens" 6 help 7 Say Y here, and a list of supported touchscreens will be displayed. 8 This option doesn't affect the kernel. 9 10 If unsure, say Y. 11 12if INPUT_TOUCHSCREEN 13 14config TOUCHSCREEN_ADS7846 15 tristate "ADS 7846/7843 based touchscreens" 16 depends on SPI_MASTER 17 depends on HWMON = n || HWMON 18 help 19 Say Y here if you have a touchscreen interface using the 20 ADS7846 or ADS7843 controller, and your board-specific setup 21 code includes that in its table of SPI devices. 22 23 If HWMON is selected, and the driver is told the reference voltage 24 on your board, you will also get hwmon interfaces for the voltage 25 (and on ads7846, temperature) sensors of this chip. 26 27 If unsure, say N (but it's safe to say "Y"). 28 29 To compile this driver as a module, choose M here: the 30 module will be called ads7846. 31 32config TOUCHSCREEN_BITSY 33 tristate "Compaq iPAQ H3600 (Bitsy) touchscreen" 34 depends on SA1100_BITSY 35 select SERIO 36 help 37 Say Y here if you have the h3600 (Bitsy) touchscreen. 38 39 If unsure, say N. 40 41 To compile this driver as a module, choose M here: the 42 module will be called h3600_ts_input. 43 44config TOUCHSCREEN_CORGI 45 tristate "SharpSL (Corgi and Spitz series) touchscreen driver" 46 depends on PXA_SHARPSL 47 default y 48 help 49 Say Y here to enable the driver for the touchscreen on the 50 Sharp SL-C7xx and SL-Cxx00 series of PDAs. 51 52 If unsure, say N. 53 54 To compile this driver as a module, choose M here: the 55 module will be called corgi_ts. 56 57config TOUCHSCREEN_GUNZE 58 tristate "Gunze AHL-51S touchscreen" 59 select SERIO 60 help 61 Say Y here if you have the Gunze AHL-51 touchscreen connected to 62 your system. 63 64 If unsure, say N. 65 66 To compile this driver as a module, choose M here: the 67 module will be called gunze. 68 69config TOUCHSCREEN_ELO 70 tristate "Elo serial touchscreens" 71 select SERIO 72 help 73 Say Y here if you have an Elo serial touchscreen connected to 74 your system. 75 76 If unsure, say N. 77 78 To compile this driver as a module, choose M here: the 79 module will be called elo. 80 81config TOUCHSCREEN_MTOUCH 82 tristate "MicroTouch serial touchscreens" 83 select SERIO 84 help 85 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to 86 your system. 87 88 If unsure, say N. 89 90 To compile this driver as a module, choose M here: the 91 module will be called mtouch. 92 93config TOUCHSCREEN_MK712 94 tristate "ICS MicroClock MK712 touchscreen" 95 help 96 Say Y here if you have the ICS MicroClock MK712 touchscreen 97 controller chip in your system. 98 99 If unsure, say N. 100 101 To compile this driver as a module, choose M here: the 102 module will be called mk712. 103 104config TOUCHSCREEN_HP600 105 tristate "HP Jornada 680/690 touchscreen" 106 depends on SH_HP6XX && SH_ADC 107 help 108 Say Y here if you have a HP Jornada 680 or 690 and want to 109 support the built-in touchscreen. 110 111 If unsure, say N. 112 113 To compile this driver as a module, choose M here: the 114 module will be called hp680_ts_input. 115 116config TOUCHSCREEN_PENMOUNT 117 tristate "Penmount serial touchscreen" 118 select SERIO 119 help 120 Say Y here if you have a Penmount serial touchscreen connected to 121 your system. 122 123 If unsure, say N. 124 125 To compile this driver as a module, choose M here: the 126 module will be called penmount. 127 128config TOUCHSCREEN_TOUCHRIGHT 129 tristate "Touchright serial touchscreen" 130 select SERIO 131 help 132 Say Y here if you have a Touchright serial touchscreen connected to 133 your system. 134 135 If unsure, say N. 136 137 To compile this driver as a module, choose M here: the 138 module will be called touchright. 139 140config TOUCHSCREEN_TOUCHWIN 141 tristate "Touchwin serial touchscreen" 142 select SERIO 143 help 144 Say Y here if you have a Touchwin serial touchscreen connected to 145 your system. 146 147 If unsure, say N. 148 149 To compile this driver as a module, choose M here: the 150 module will be called touchwin. 151 152config TOUCHSCREEN_UCB1400 153 tristate "Philips UCB1400 touchscreen" 154 select AC97_BUS 155 help 156 This enables support for the Philips UCB1400 touchscreen interface. 157 The UCB1400 is an AC97 audio codec. The touchscreen interface 158 will be initialized only after the ALSA subsystem has been 159 brought up and the UCB1400 detected. You therefore have to 160 configure ALSA support as well (either built-in or modular, 161 independently of whether this driver is itself built-in or 162 modular) for this driver to work. 163 164 To compile this driver as a module, choose M here: the 165 module will be called ucb1400_ts. 166 167config TOUCHSCREEN_USB_COMPOSITE 168 tristate "USB Touchscreen Driver" 169 select USB 170 help 171 USB Touchscreen driver for: 172 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700) 173 - PanJit TouchSet USB 174 - 3M MicroTouch USB (EX II series) 175 - ITM 176 - some other eTurboTouch 177 - Gunze AHL61 178 - DMC TSC-10/25 179 180 Have a look at <http://linux.chapter7.ch/touchkit/> for 181 a usage description and the required user-space stuff. 182 183 To compile this driver as a module, choose M here: the 184 module will be called usbtouchscreen. 185 186config TOUCHSCREEN_USB_EGALAX 187 default y 188 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED 189 depends on TOUCHSCREEN_USB_COMPOSITE 190 191config TOUCHSCREEN_USB_PANJIT 192 default y 193 bool "PanJit device support" if EMBEDDED 194 depends on TOUCHSCREEN_USB_COMPOSITE 195 196config TOUCHSCREEN_USB_3M 197 default y 198 bool "3M/Microtouch EX II series device support" if EMBEDDED 199 depends on TOUCHSCREEN_USB_COMPOSITE 200 201config TOUCHSCREEN_USB_ITM 202 default y 203 bool "ITM device support" if EMBEDDED 204 depends on TOUCHSCREEN_USB_COMPOSITE 205 206config TOUCHSCREEN_USB_ETURBO 207 default y 208 bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED 209 depends on TOUCHSCREEN_USB_COMPOSITE 210 211config TOUCHSCREEN_USB_GUNZE 212 default y 213 bool "Gunze AHL61 device support" if EMBEDDED 214 depends on TOUCHSCREEN_USB_COMPOSITE 215 216config TOUCHSCREEN_USB_DMC_TSC10 217 default y 218 bool "DMC TSC-10/25 device support" if EMBEDDED 219 depends on TOUCHSCREEN_USB_COMPOSITE 220 221endif 222