1 /* 2 * Native support for the Aiptek HyperPen USB Tablets 3 * (4000U/5000U/6000U/8000U/12000U) 4 * 5 * Copyright (c) 2001 Chris Atenasio <chris@crud.net> 6 * Copyright (c) 2002-2004 Bryan W. Headley <bwheadley@earthlink.net> 7 * 8 * based on wacom.c by 9 * Vojtech Pavlik <vojtech@suse.cz> 10 * Andreas Bach Aaen <abach@stofanet.dk> 11 * Clifford Wolf <clifford@clifford.at> 12 * Sam Mosel <sam.mosel@computer.org> 13 * James E. Blair <corvus@gnu.org> 14 * Daniel Egger <egger@suse.de> 15 * 16 * Many thanks to Oliver Kuechemann for his support. 17 * 18 * ChangeLog: 19 * v0.1 - Initial release 20 * v0.2 - Hack to get around fake event 28's. (Bryan W. Headley) 21 * v0.3 - Make URB dynamic (Bryan W. Headley, Jun-8-2002) 22 * Released to Linux 2.4.19 and 2.5.x 23 * v0.4 - Rewrote substantial portions of the code to deal with 24 * corrected control sequences, timing, dynamic configuration, 25 * support of 6000U - 12000U, procfs, and macro key support 26 * (Jan-1-2003 - Feb-5-2003, Bryan W. Headley) 27 * v1.0 - Added support for diagnostic messages, count of messages 28 * received from URB - Mar-8-2003, Bryan W. Headley 29 * v1.1 - added support for tablet resolution, changed DV and proximity 30 * some corrections - Jun-22-2003, martin schneebacher 31 * - Added support for the sysfs interface, deprecating the 32 * procfs interface for 2.5.x kernel. Also added support for 33 * Wheel command. Bryan W. Headley July-15-2003. 34 * v1.2 - Reworked jitter timer as a kernel thread. 35 * Bryan W. Headley November-28-2003/Jan-10-2004. 36 * v1.3 - Repaired issue of kernel thread going nuts on single-processor 37 * machines, introduced programmableDelay as a command line 38 * parameter. Feb 7 2004, Bryan W. Headley. 39 * v1.4 - Re-wire jitter so it does not require a thread. Courtesy of 40 * Rene van Paassen. Added reporting of physical pointer device 41 * (e.g., stylus, mouse in reports 2, 3, 4, 5. We don't know 42 * for reports 1, 6.) 43 * what physical device reports for reports 1, 6.) Also enabled 44 * MOUSE and LENS tool button modes. Renamed "rubber" to "eraser". 45 * Feb 20, 2004, Bryan W. Headley. 46 * v1.5 - Added previousJitterable, so we don't do jitter delay when the 47 * user is holding a button down for periods of time. 48 * 49 * NOTE: 50 * This kernel driver is augmented by the "Aiptek" XFree86 input 51 * driver for your X server, as well as the Gaiptek GUI Front-end 52 * "Tablet Manager". 53 * These three products are highly interactive with one another, 54 * so therefore it's easier to document them all as one subsystem. 55 * Please visit the project's "home page", located at, 56 * http://aiptektablet.sourceforge.net. 57 * 58 * This program is free software; you can redistribute it and/or modify 59 * it under the terms of the GNU General Public License as published by 60 * the Free Software Foundation; either version 2 of the License, or 61 * (at your option) any later version. 62 * 63 * This program is distributed in the hope that it will be useful, 64 * but WITHOUT ANY WARRANTY; without even the implied warranty of 65 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 66 * GNU General Public License for more details. 67 * 68 * You should have received a copy of the GNU General Public License 69 * along with this program; if not, write to the Free Software 70 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 71 */ 72 73 #include <linux/jiffies.h> 74 #include <linux/kernel.h> 75 #include <linux/slab.h> 76 #include <linux/module.h> 77 #include <linux/init.h> 78 #include <linux/usb/input.h> 79 #include <asm/uaccess.h> 80 #include <asm/unaligned.h> 81 82 /* 83 * Version Information 84 */ 85 #define DRIVER_VERSION "v2.3 (May 2, 2007)" 86 #define DRIVER_AUTHOR "Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen" 87 #define DRIVER_DESC "Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)" 88 89 /* 90 * Aiptek status packet: 91 * 92 * (returned as Report 1 - relative coordinates from mouse and stylus) 93 * 94 * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 95 * byte0 0 0 0 0 0 0 0 1 96 * byte1 0 0 0 0 0 BS2 BS Tip 97 * byte2 X7 X6 X5 X4 X3 X2 X1 X0 98 * byte3 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 99 * 100 * (returned as Report 2 - absolute coordinates from the stylus) 101 * 102 * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 103 * byte0 0 0 0 0 0 0 1 0 104 * byte1 X7 X6 X5 X4 X3 X2 X1 X0 105 * byte2 X15 X14 X13 X12 X11 X10 X9 X8 106 * byte3 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 107 * byte4 Y15 Y14 Y13 Y12 Y11 Y10 Y9 Y8 108 * byte5 * * * BS2 BS1 Tip IR DV 109 * byte6 P7 P6 P5 P4 P3 P2 P1 P0 110 * byte7 P15 P14 P13 P12 P11 P10 P9 P8 111 * 112 * (returned as Report 3 - absolute coordinates from the mouse) 113 * 114 * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 115 * byte0 0 0 0 0 0 0 1 1 116 * byte1 X7 X6 X5 X4 X3 X2 X1 X0 117 * byte2 X15 X14 X13 X12 X11 X10 X9 X8 118 * byte3 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 119 * byte4 Y15 Y14 Y13 Y12 Y11 Y10 Y9 Y8 120 * byte5 * * * BS2 BS1 Tip IR DV 121 * byte6 P7 P6 P5 P4 P3 P2 P1 P0 122 * byte7 P15 P14 P13 P12 P11 P10 P9 P8 123 * 124 * (returned as Report 4 - macrokeys from the stylus) 125 * 126 * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 127 * byte0 0 0 0 0 0 1 0 0 128 * byte1 0 0 0 BS2 BS Tip IR DV 129 * byte2 0 0 0 0 0 0 1 0 130 * byte3 0 0 0 K4 K3 K2 K1 K0 131 * byte4 P7 P6 P5 P4 P3 P2 P1 P0 132 * byte5 P15 P14 P13 P12 P11 P10 P9 P8 133 * 134 * (returned as Report 5 - macrokeys from the mouse) 135 * 136 * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 137 * byte0 0 0 0 0 0 1 0 1 138 * byte1 0 0 0 BS2 BS Tip IR DV 139 * byte2 0 0 0 0 0 0 1 0 140 * byte3 0 0 0 K4 K3 K2 K1 K0 141 * byte4 P7 P6 P5 P4 P3 P2 P1 P0 142 * byte5 P15 P14 P13 P12 P11 P10 P9 P8 143 * 144 * IR: In Range = Proximity on 145 * DV = Data Valid 146 * BS = Barrel Switch (as in, macro keys) 147 * BS2 also referred to as Tablet Pick 148 * 149 * Command Summary: 150 * 151 * Use report_type CONTROL (3) 152 * Use report_id 2 153 * 154 * Command/Data Description Return Bytes Return Value 155 * 0x10/0x00 SwitchToMouse 0 156 * 0x10/0x01 SwitchToTablet 0 157 * 0x18/0x04 SetResolution 0 158 * 0x12/0xFF AutoGainOn 0 159 * 0x17/0x00 FilterOn 0 160 * 0x01/0x00 GetXExtension 2 MaxX 161 * 0x01/0x01 GetYExtension 2 MaxY 162 * 0x02/0x00 GetModelCode 2 ModelCode = LOBYTE 163 * 0x03/0x00 GetODMCode 2 ODMCode 164 * 0x08/0x00 GetPressureLevels 2 =512 165 * 0x04/0x00 GetFirmwareVersion 2 Firmware Version 166 * 0x11/0x02 EnableMacroKeys 0 167 * 168 * To initialize the tablet: 169 * 170 * (1) Send Resolution500LPI (Command) 171 * (2) Query for Model code (Option Report) 172 * (3) Query for ODM code (Option Report) 173 * (4) Query for firmware (Option Report) 174 * (5) Query for GetXExtension (Option Report) 175 * (6) Query for GetYExtension (Option Report) 176 * (7) Query for GetPressureLevels (Option Report) 177 * (8) SwitchToTablet for Absolute coordinates, or 178 * SwitchToMouse for Relative coordinates (Command) 179 * (9) EnableMacroKeys (Command) 180 * (10) FilterOn (Command) 181 * (11) AutoGainOn (Command) 182 * 183 * (Step 9 can be omitted, but you'll then have no function keys.) 184 */ 185 186 #define USB_VENDOR_ID_AIPTEK 0x08ca 187 #define USB_VENDOR_ID_KYE 0x0458 188 #define USB_REQ_GET_REPORT 0x01 189 #define USB_REQ_SET_REPORT 0x09 190 191 /* PointerMode codes 192 */ 193 #define AIPTEK_POINTER_ONLY_MOUSE_MODE 0 194 #define AIPTEK_POINTER_ONLY_STYLUS_MODE 1 195 #define AIPTEK_POINTER_EITHER_MODE 2 196 197 #define AIPTEK_POINTER_ALLOW_MOUSE_MODE(a) \ 198 (a == AIPTEK_POINTER_ONLY_MOUSE_MODE || \ 199 a == AIPTEK_POINTER_EITHER_MODE) 200 #define AIPTEK_POINTER_ALLOW_STYLUS_MODE(a) \ 201 (a == AIPTEK_POINTER_ONLY_STYLUS_MODE || \ 202 a == AIPTEK_POINTER_EITHER_MODE) 203 204 /* CoordinateMode code 205 */ 206 #define AIPTEK_COORDINATE_RELATIVE_MODE 0 207 #define AIPTEK_COORDINATE_ABSOLUTE_MODE 1 208 209 /* XTilt and YTilt values 210 */ 211 #define AIPTEK_TILT_MIN (-128) 212 #define AIPTEK_TILT_MAX 127 213 #define AIPTEK_TILT_DISABLE (-10101) 214 215 /* Wheel values 216 */ 217 #define AIPTEK_WHEEL_MIN 0 218 #define AIPTEK_WHEEL_MAX 1024 219 #define AIPTEK_WHEEL_DISABLE (-10101) 220 221 /* ToolCode values, which BTW are 0x140 .. 0x14f 222 * We have things set up such that if the tool button has changed, 223 * the tools get reset. 224 */ 225 /* toolMode codes 226 */ 227 #define AIPTEK_TOOL_BUTTON_PEN_MODE BTN_TOOL_PEN 228 #define AIPTEK_TOOL_BUTTON_PENCIL_MODE BTN_TOOL_PENCIL 229 #define AIPTEK_TOOL_BUTTON_BRUSH_MODE BTN_TOOL_BRUSH 230 #define AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE BTN_TOOL_AIRBRUSH 231 #define AIPTEK_TOOL_BUTTON_ERASER_MODE BTN_TOOL_RUBBER 232 #define AIPTEK_TOOL_BUTTON_MOUSE_MODE BTN_TOOL_MOUSE 233 #define AIPTEK_TOOL_BUTTON_LENS_MODE BTN_TOOL_LENS 234 235 /* Diagnostic message codes 236 */ 237 #define AIPTEK_DIAGNOSTIC_NA 0 238 #define AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE 1 239 #define AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE 2 240 #define AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED 3 241 242 /* Time to wait (in ms) to help mask hand jittering 243 * when pressing the stylus buttons. 244 */ 245 #define AIPTEK_JITTER_DELAY_DEFAULT 50 246 247 /* Time to wait (in ms) in-between sending the tablet 248 * a command and beginning the process of reading the return 249 * sequence from the tablet. 250 */ 251 #define AIPTEK_PROGRAMMABLE_DELAY_25 25 252 #define AIPTEK_PROGRAMMABLE_DELAY_50 50 253 #define AIPTEK_PROGRAMMABLE_DELAY_100 100 254 #define AIPTEK_PROGRAMMABLE_DELAY_200 200 255 #define AIPTEK_PROGRAMMABLE_DELAY_300 300 256 #define AIPTEK_PROGRAMMABLE_DELAY_400 400 257 #define AIPTEK_PROGRAMMABLE_DELAY_DEFAULT AIPTEK_PROGRAMMABLE_DELAY_400 258 259 /* Mouse button programming 260 */ 261 #define AIPTEK_MOUSE_LEFT_BUTTON 0x04 262 #define AIPTEK_MOUSE_RIGHT_BUTTON 0x08 263 #define AIPTEK_MOUSE_MIDDLE_BUTTON 0x10 264 265 /* Stylus button programming 266 */ 267 #define AIPTEK_STYLUS_LOWER_BUTTON 0x08 268 #define AIPTEK_STYLUS_UPPER_BUTTON 0x10 269 270 /* Length of incoming packet from the tablet 271 */ 272 #define AIPTEK_PACKET_LENGTH 8 273 274 /* We report in EV_MISC both the proximity and 275 * whether the report came from the stylus, tablet mouse 276 * or "unknown" -- Unknown when the tablet is in relative 277 * mode, because we only get report 1's. 278 */ 279 #define AIPTEK_REPORT_TOOL_UNKNOWN 0x10 280 #define AIPTEK_REPORT_TOOL_STYLUS 0x20 281 #define AIPTEK_REPORT_TOOL_MOUSE 0x40 282 283 static int programmableDelay = AIPTEK_PROGRAMMABLE_DELAY_DEFAULT; 284 static int jitterDelay = AIPTEK_JITTER_DELAY_DEFAULT; 285 286 struct aiptek_features { 287 int odmCode; /* Tablet manufacturer code */ 288 int modelCode; /* Tablet model code (not unique) */ 289 int firmwareCode; /* prom/eeprom version */ 290 char usbPath[64 + 1]; /* device's physical usb path */ 291 }; 292 293 struct aiptek_settings { 294 int pointerMode; /* stylus-, mouse-only or either */ 295 int coordinateMode; /* absolute/relative coords */ 296 int toolMode; /* pen, pencil, brush, etc. tool */ 297 int xTilt; /* synthetic xTilt amount */ 298 int yTilt; /* synthetic yTilt amount */ 299 int wheel; /* synthetic wheel amount */ 300 int stylusButtonUpper; /* stylus upper btn delivers... */ 301 int stylusButtonLower; /* stylus lower btn delivers... */ 302 int mouseButtonLeft; /* mouse left btn delivers... */ 303 int mouseButtonMiddle; /* mouse middle btn delivers... */ 304 int mouseButtonRight; /* mouse right btn delivers... */ 305 int programmableDelay; /* delay for tablet programming */ 306 int jitterDelay; /* delay for hand jittering */ 307 }; 308 309 struct aiptek { 310 struct input_dev *inputdev; /* input device struct */ 311 struct usb_device *usbdev; /* usb device struct */ 312 struct urb *urb; /* urb for incoming reports */ 313 dma_addr_t data_dma; /* our dma stuffage */ 314 struct aiptek_features features; /* tablet's array of features */ 315 struct aiptek_settings curSetting; /* tablet's current programmable */ 316 struct aiptek_settings newSetting; /* ... and new param settings */ 317 unsigned int ifnum; /* interface number for IO */ 318 int diagnostic; /* tablet diagnostic codes */ 319 unsigned long eventCount; /* event count */ 320 int inDelay; /* jitter: in jitter delay? */ 321 unsigned long endDelay; /* jitter: time when delay ends */ 322 int previousJitterable; /* jitterable prev value */ 323 324 int lastMacro; /* macro key to reset */ 325 int previousToolMode; /* pen, pencil, brush, etc. tool */ 326 unsigned char *data; /* incoming packet data */ 327 }; 328 329 static const int eventTypes[] = { 330 EV_KEY, EV_ABS, EV_REL, EV_MSC, 331 }; 332 333 static const int absEvents[] = { 334 ABS_X, ABS_Y, ABS_PRESSURE, ABS_TILT_X, ABS_TILT_Y, 335 ABS_WHEEL, ABS_MISC, 336 }; 337 338 static const int relEvents[] = { 339 REL_X, REL_Y, REL_WHEEL, 340 }; 341 342 static const int buttonEvents[] = { 343 BTN_LEFT, BTN_RIGHT, BTN_MIDDLE, 344 BTN_TOOL_PEN, BTN_TOOL_RUBBER, BTN_TOOL_PENCIL, BTN_TOOL_AIRBRUSH, 345 BTN_TOOL_BRUSH, BTN_TOOL_MOUSE, BTN_TOOL_LENS, BTN_TOUCH, 346 BTN_STYLUS, BTN_STYLUS2, 347 }; 348 349 /* 350 * Permit easy lookup of keyboard events to send, versus 351 * the bitmap which comes from the tablet. This hides the 352 * issue that the F_keys are not sequentially numbered. 353 */ 354 static const int macroKeyEvents[] = { 355 KEY_ESC, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, 356 KEY_F6, KEY_F7, KEY_F8, KEY_F9, KEY_F10, KEY_F11, 357 KEY_F12, KEY_F13, KEY_F14, KEY_F15, KEY_F16, KEY_F17, 358 KEY_F18, KEY_F19, KEY_F20, KEY_F21, KEY_F22, KEY_F23, 359 KEY_F24, KEY_STOP, KEY_AGAIN, KEY_PROPS, KEY_UNDO, 360 KEY_FRONT, KEY_COPY, KEY_OPEN, KEY_PASTE, 0 361 }; 362 363 /*********************************************************************** 364 * Map values to strings and back. Every map should have the following 365 * as its last element: { NULL, AIPTEK_INVALID_VALUE }. 366 */ 367 #define AIPTEK_INVALID_VALUE -1 368 369 struct aiptek_map { 370 const char *string; 371 int value; 372 }; 373 374 static int map_str_to_val(const struct aiptek_map *map, const char *str, size_t count) 375 { 376 const struct aiptek_map *p; 377 378 if (str[count - 1] == '\n') 379 count--; 380 381 for (p = map; p->string; p++) 382 if (!strncmp(str, p->string, count)) 383 return p->value; 384 385 return AIPTEK_INVALID_VALUE; 386 } 387 388 static const char *map_val_to_str(const struct aiptek_map *map, int val) 389 { 390 const struct aiptek_map *p; 391 392 for (p = map; p->value != AIPTEK_INVALID_VALUE; p++) 393 if (val == p->value) 394 return p->string; 395 396 return "unknown"; 397 } 398 399 /*********************************************************************** 400 * aiptek_irq can receive one of six potential reports. 401 * The documentation for each is in the body of the function. 402 * 403 * The tablet reports on several attributes per invocation of 404 * aiptek_irq. Because the Linux Input Event system allows the 405 * transmission of ONE attribute per input_report_xxx() call, 406 * collation has to be done on the other end to reconstitute 407 * a complete tablet report. Further, the number of Input Event reports 408 * submitted varies, depending on what USB report type, and circumstance. 409 * To deal with this, EV_MSC is used to indicate an 'end-of-report' 410 * message. This has been an undocumented convention understood by the kernel 411 * tablet driver and clients such as gpm and XFree86's tablet drivers. 412 * 413 * Of the information received from the tablet, the one piece I 414 * cannot transmit is the proximity bit (without resorting to an EV_MSC 415 * convention above.) I therefore have taken over REL_MISC and ABS_MISC 416 * (for relative and absolute reports, respectively) for communicating 417 * Proximity. Why two events? I thought it interesting to know if the 418 * Proximity event occurred while the tablet was in absolute or relative 419 * mode. 420 * Update: REL_MISC proved not to be such a good idea. With REL_MISC you 421 * get an event transmitted each time. ABS_MISC works better, since it 422 * can be set and re-set. Thus, only using ABS_MISC from now on. 423 * 424 * Other tablets use the notion of a certain minimum stylus pressure 425 * to infer proximity. While that could have been done, that is yet 426 * another 'by convention' behavior, the documentation for which 427 * would be spread between two (or more) pieces of software. 428 * 429 * EV_MSC usage was terminated for this purpose in Linux 2.5.x, and 430 * replaced with the input_sync() method (which emits EV_SYN.) 431 */ 432 433 static void aiptek_irq(struct urb *urb) 434 { 435 struct aiptek *aiptek = urb->context; 436 unsigned char *data = aiptek->data; 437 struct input_dev *inputdev = aiptek->inputdev; 438 int jitterable = 0; 439 int retval, macro, x, y, z, left, right, middle, p, dv, tip, bs, pck; 440 441 switch (urb->status) { 442 case 0: 443 /* Success */ 444 break; 445 446 case -ECONNRESET: 447 case -ENOENT: 448 case -ESHUTDOWN: 449 /* This urb is terminated, clean up */ 450 dbg("%s - urb shutting down with status: %d", 451 __func__, urb->status); 452 return; 453 454 default: 455 dbg("%s - nonzero urb status received: %d", 456 __func__, urb->status); 457 goto exit; 458 } 459 460 /* See if we are in a delay loop -- throw out report if true. 461 */ 462 if (aiptek->inDelay == 1 && time_after(aiptek->endDelay, jiffies)) { 463 goto exit; 464 } 465 466 aiptek->inDelay = 0; 467 aiptek->eventCount++; 468 469 /* Report 1 delivers relative coordinates with either a stylus 470 * or the mouse. You do not know, however, which input 471 * tool generated the event. 472 */ 473 if (data[0] == 1) { 474 if (aiptek->curSetting.coordinateMode == 475 AIPTEK_COORDINATE_ABSOLUTE_MODE) { 476 aiptek->diagnostic = 477 AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE; 478 } else { 479 x = (signed char) data[2]; 480 y = (signed char) data[3]; 481 482 /* jitterable keeps track of whether any button has been pressed. 483 * We're also using it to remap the physical mouse button mask 484 * to pseudo-settings. (We don't specifically care about it's 485 * value after moving/transposing mouse button bitmasks, except 486 * that a non-zero value indicates that one or more 487 * mouse button was pressed.) 488 */ 489 jitterable = data[1] & 0x07; 490 491 left = (data[1] & aiptek->curSetting.mouseButtonLeft >> 2) != 0 ? 1 : 0; 492 right = (data[1] & aiptek->curSetting.mouseButtonRight >> 2) != 0 ? 1 : 0; 493 middle = (data[1] & aiptek->curSetting.mouseButtonMiddle >> 2) != 0 ? 1 : 0; 494 495 input_report_key(inputdev, BTN_LEFT, left); 496 input_report_key(inputdev, BTN_MIDDLE, middle); 497 input_report_key(inputdev, BTN_RIGHT, right); 498 499 input_report_abs(inputdev, ABS_MISC, 500 1 | AIPTEK_REPORT_TOOL_UNKNOWN); 501 input_report_rel(inputdev, REL_X, x); 502 input_report_rel(inputdev, REL_Y, y); 503 504 /* Wheel support is in the form of a single-event 505 * firing. 506 */ 507 if (aiptek->curSetting.wheel != AIPTEK_WHEEL_DISABLE) { 508 input_report_rel(inputdev, REL_WHEEL, 509 aiptek->curSetting.wheel); 510 aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE; 511 } 512 if (aiptek->lastMacro != -1) { 513 input_report_key(inputdev, 514 macroKeyEvents[aiptek->lastMacro], 0); 515 aiptek->lastMacro = -1; 516 } 517 input_sync(inputdev); 518 } 519 } 520 /* Report 2 is delivered only by the stylus, and delivers 521 * absolute coordinates. 522 */ 523 else if (data[0] == 2) { 524 if (aiptek->curSetting.coordinateMode == AIPTEK_COORDINATE_RELATIVE_MODE) { 525 aiptek->diagnostic = AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE; 526 } else if (!AIPTEK_POINTER_ALLOW_STYLUS_MODE 527 (aiptek->curSetting.pointerMode)) { 528 aiptek->diagnostic = AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED; 529 } else { 530 x = get_unaligned_le16(data + 1); 531 y = get_unaligned_le16(data + 3); 532 z = get_unaligned_le16(data + 6); 533 534 dv = (data[5] & 0x01) != 0 ? 1 : 0; 535 p = (data[5] & 0x02) != 0 ? 1 : 0; 536 tip = (data[5] & 0x04) != 0 ? 1 : 0; 537 538 /* Use jitterable to re-arrange button masks 539 */ 540 jitterable = data[5] & 0x18; 541 542 bs = (data[5] & aiptek->curSetting.stylusButtonLower) != 0 ? 1 : 0; 543 pck = (data[5] & aiptek->curSetting.stylusButtonUpper) != 0 ? 1 : 0; 544 545 /* dv indicates 'data valid' (e.g., the tablet is in sync 546 * and has delivered a "correct" report) We will ignore 547 * all 'bad' reports... 548 */ 549 if (dv != 0) { 550 /* If the selected tool changed, reset the old 551 * tool key, and set the new one. 552 */ 553 if (aiptek->previousToolMode != 554 aiptek->curSetting.toolMode) { 555 input_report_key(inputdev, 556 aiptek->previousToolMode, 0); 557 input_report_key(inputdev, 558 aiptek->curSetting.toolMode, 559 1); 560 aiptek->previousToolMode = 561 aiptek->curSetting.toolMode; 562 } 563 564 if (p != 0) { 565 input_report_abs(inputdev, ABS_X, x); 566 input_report_abs(inputdev, ABS_Y, y); 567 input_report_abs(inputdev, ABS_PRESSURE, z); 568 569 input_report_key(inputdev, BTN_TOUCH, tip); 570 input_report_key(inputdev, BTN_STYLUS, bs); 571 input_report_key(inputdev, BTN_STYLUS2, pck); 572 573 if (aiptek->curSetting.xTilt != 574 AIPTEK_TILT_DISABLE) { 575 input_report_abs(inputdev, 576 ABS_TILT_X, 577 aiptek->curSetting.xTilt); 578 } 579 if (aiptek->curSetting.yTilt != AIPTEK_TILT_DISABLE) { 580 input_report_abs(inputdev, 581 ABS_TILT_Y, 582 aiptek->curSetting.yTilt); 583 } 584 585 /* Wheel support is in the form of a single-event 586 * firing. 587 */ 588 if (aiptek->curSetting.wheel != 589 AIPTEK_WHEEL_DISABLE) { 590 input_report_abs(inputdev, 591 ABS_WHEEL, 592 aiptek->curSetting.wheel); 593 aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE; 594 } 595 } 596 input_report_abs(inputdev, ABS_MISC, p | AIPTEK_REPORT_TOOL_STYLUS); 597 if (aiptek->lastMacro != -1) { 598 input_report_key(inputdev, 599 macroKeyEvents[aiptek->lastMacro], 0); 600 aiptek->lastMacro = -1; 601 } 602 input_sync(inputdev); 603 } 604 } 605 } 606 /* Report 3's come from the mouse in absolute mode. 607 */ 608 else if (data[0] == 3) { 609 if (aiptek->curSetting.coordinateMode == AIPTEK_COORDINATE_RELATIVE_MODE) { 610 aiptek->diagnostic = AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE; 611 } else if (!AIPTEK_POINTER_ALLOW_MOUSE_MODE 612 (aiptek->curSetting.pointerMode)) { 613 aiptek->diagnostic = AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED; 614 } else { 615 x = get_unaligned_le16(data + 1); 616 y = get_unaligned_le16(data + 3); 617 618 jitterable = data[5] & 0x1c; 619 620 dv = (data[5] & 0x01) != 0 ? 1 : 0; 621 p = (data[5] & 0x02) != 0 ? 1 : 0; 622 left = (data[5] & aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0; 623 right = (data[5] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0; 624 middle = (data[5] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0; 625 626 if (dv != 0) { 627 /* If the selected tool changed, reset the old 628 * tool key, and set the new one. 629 */ 630 if (aiptek->previousToolMode != 631 aiptek->curSetting.toolMode) { 632 input_report_key(inputdev, 633 aiptek->previousToolMode, 0); 634 input_report_key(inputdev, 635 aiptek->curSetting.toolMode, 636 1); 637 aiptek->previousToolMode = 638 aiptek->curSetting.toolMode; 639 } 640 641 if (p != 0) { 642 input_report_abs(inputdev, ABS_X, x); 643 input_report_abs(inputdev, ABS_Y, y); 644 645 input_report_key(inputdev, BTN_LEFT, left); 646 input_report_key(inputdev, BTN_MIDDLE, middle); 647 input_report_key(inputdev, BTN_RIGHT, right); 648 649 /* Wheel support is in the form of a single-event 650 * firing. 651 */ 652 if (aiptek->curSetting.wheel != AIPTEK_WHEEL_DISABLE) { 653 input_report_abs(inputdev, 654 ABS_WHEEL, 655 aiptek->curSetting.wheel); 656 aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE; 657 } 658 } 659 input_report_abs(inputdev, ABS_MISC, p | AIPTEK_REPORT_TOOL_MOUSE); 660 if (aiptek->lastMacro != -1) { 661 input_report_key(inputdev, 662 macroKeyEvents[aiptek->lastMacro], 0); 663 aiptek->lastMacro = -1; 664 } 665 input_sync(inputdev); 666 } 667 } 668 } 669 /* Report 4s come from the macro keys when pressed by stylus 670 */ 671 else if (data[0] == 4) { 672 jitterable = data[1] & 0x18; 673 674 dv = (data[1] & 0x01) != 0 ? 1 : 0; 675 p = (data[1] & 0x02) != 0 ? 1 : 0; 676 tip = (data[1] & 0x04) != 0 ? 1 : 0; 677 bs = (data[1] & aiptek->curSetting.stylusButtonLower) != 0 ? 1 : 0; 678 pck = (data[1] & aiptek->curSetting.stylusButtonUpper) != 0 ? 1 : 0; 679 680 macro = dv && p && tip && !(data[3] & 1) ? (data[3] >> 1) : -1; 681 z = get_unaligned_le16(data + 4); 682 683 if (dv) { 684 /* If the selected tool changed, reset the old 685 * tool key, and set the new one. 686 */ 687 if (aiptek->previousToolMode != 688 aiptek->curSetting.toolMode) { 689 input_report_key(inputdev, 690 aiptek->previousToolMode, 0); 691 input_report_key(inputdev, 692 aiptek->curSetting.toolMode, 693 1); 694 aiptek->previousToolMode = 695 aiptek->curSetting.toolMode; 696 } 697 } 698 699 if (aiptek->lastMacro != -1 && aiptek->lastMacro != macro) { 700 input_report_key(inputdev, macroKeyEvents[aiptek->lastMacro], 0); 701 aiptek->lastMacro = -1; 702 } 703 704 if (macro != -1 && macro != aiptek->lastMacro) { 705 input_report_key(inputdev, macroKeyEvents[macro], 1); 706 aiptek->lastMacro = macro; 707 } 708 input_report_abs(inputdev, ABS_MISC, 709 p | AIPTEK_REPORT_TOOL_STYLUS); 710 input_sync(inputdev); 711 } 712 /* Report 5s come from the macro keys when pressed by mouse 713 */ 714 else if (data[0] == 5) { 715 jitterable = data[1] & 0x1c; 716 717 dv = (data[1] & 0x01) != 0 ? 1 : 0; 718 p = (data[1] & 0x02) != 0 ? 1 : 0; 719 left = (data[1]& aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0; 720 right = (data[1] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0; 721 middle = (data[1] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0; 722 macro = dv && p && left && !(data[3] & 1) ? (data[3] >> 1) : 0; 723 724 if (dv) { 725 /* If the selected tool changed, reset the old 726 * tool key, and set the new one. 727 */ 728 if (aiptek->previousToolMode != 729 aiptek->curSetting.toolMode) { 730 input_report_key(inputdev, 731 aiptek->previousToolMode, 0); 732 input_report_key(inputdev, 733 aiptek->curSetting.toolMode, 1); 734 aiptek->previousToolMode = aiptek->curSetting.toolMode; 735 } 736 } 737 738 if (aiptek->lastMacro != -1 && aiptek->lastMacro != macro) { 739 input_report_key(inputdev, macroKeyEvents[aiptek->lastMacro], 0); 740 aiptek->lastMacro = -1; 741 } 742 743 if (macro != -1 && macro != aiptek->lastMacro) { 744 input_report_key(inputdev, macroKeyEvents[macro], 1); 745 aiptek->lastMacro = macro; 746 } 747 748 input_report_abs(inputdev, ABS_MISC, 749 p | AIPTEK_REPORT_TOOL_MOUSE); 750 input_sync(inputdev); 751 } 752 /* We have no idea which tool can generate a report 6. Theoretically, 753 * neither need to, having been given reports 4 & 5 for such use. 754 * However, report 6 is the 'official-looking' report for macroKeys; 755 * reports 4 & 5 supposively are used to support unnamed, unknown 756 * hat switches (which just so happen to be the macroKeys.) 757 */ 758 else if (data[0] == 6) { 759 macro = get_unaligned_le16(data + 1); 760 if (macro > 0) { 761 input_report_key(inputdev, macroKeyEvents[macro - 1], 762 0); 763 } 764 if (macro < 25) { 765 input_report_key(inputdev, macroKeyEvents[macro + 1], 766 0); 767 } 768 769 /* If the selected tool changed, reset the old 770 tool key, and set the new one. 771 */ 772 if (aiptek->previousToolMode != 773 aiptek->curSetting.toolMode) { 774 input_report_key(inputdev, 775 aiptek->previousToolMode, 0); 776 input_report_key(inputdev, 777 aiptek->curSetting.toolMode, 778 1); 779 aiptek->previousToolMode = 780 aiptek->curSetting.toolMode; 781 } 782 783 input_report_key(inputdev, macroKeyEvents[macro], 1); 784 input_report_abs(inputdev, ABS_MISC, 785 1 | AIPTEK_REPORT_TOOL_UNKNOWN); 786 input_sync(inputdev); 787 } else { 788 dbg("Unknown report %d", data[0]); 789 } 790 791 /* Jitter may occur when the user presses a button on the stlyus 792 * or the mouse. What we do to prevent that is wait 'x' milliseconds 793 * following a 'jitterable' event, which should give the hand some time 794 * stabilize itself. 795 * 796 * We just introduced aiptek->previousJitterable to carry forth the 797 * notion that jitter occurs when the button state changes from on to off: 798 * a person drawing, holding a button down is not subject to jittering. 799 * With that in mind, changing from upper button depressed to lower button 800 * WILL transition through a jitter delay. 801 */ 802 803 if (aiptek->previousJitterable != jitterable && 804 aiptek->curSetting.jitterDelay != 0 && aiptek->inDelay != 1) { 805 aiptek->endDelay = jiffies + 806 ((aiptek->curSetting.jitterDelay * HZ) / 1000); 807 aiptek->inDelay = 1; 808 } 809 aiptek->previousJitterable = jitterable; 810 811 exit: 812 retval = usb_submit_urb(urb, GFP_ATOMIC); 813 if (retval != 0) { 814 err("%s - usb_submit_urb failed with result %d", 815 __func__, retval); 816 } 817 } 818 819 /*********************************************************************** 820 * These are the USB id's known so far. We do not identify them to 821 * specific Aiptek model numbers, because there has been overlaps, 822 * use, and reuse of id's in existing models. Certain models have 823 * been known to use more than one ID, indicative perhaps of 824 * manufacturing revisions. In any event, we consider these 825 * IDs to not be model-specific nor unique. 826 */ 827 static const struct usb_device_id aiptek_ids[] = { 828 {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x01)}, 829 {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x10)}, 830 {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x20)}, 831 {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x21)}, 832 {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x22)}, 833 {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x23)}, 834 {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x24)}, 835 {USB_DEVICE(USB_VENDOR_ID_KYE, 0x5003)}, 836 {} 837 }; 838 839 MODULE_DEVICE_TABLE(usb, aiptek_ids); 840 841 /*********************************************************************** 842 * Open an instance of the tablet driver. 843 */ 844 static int aiptek_open(struct input_dev *inputdev) 845 { 846 struct aiptek *aiptek = input_get_drvdata(inputdev); 847 848 aiptek->urb->dev = aiptek->usbdev; 849 if (usb_submit_urb(aiptek->urb, GFP_KERNEL) != 0) 850 return -EIO; 851 852 return 0; 853 } 854 855 /*********************************************************************** 856 * Close an instance of the tablet driver. 857 */ 858 static void aiptek_close(struct input_dev *inputdev) 859 { 860 struct aiptek *aiptek = input_get_drvdata(inputdev); 861 862 usb_kill_urb(aiptek->urb); 863 } 864 865 /*********************************************************************** 866 * aiptek_set_report and aiptek_get_report() are borrowed from Linux 2.4.x, 867 * where they were known as usb_set_report and usb_get_report. 868 */ 869 static int 870 aiptek_set_report(struct aiptek *aiptek, 871 unsigned char report_type, 872 unsigned char report_id, void *buffer, int size) 873 { 874 return usb_control_msg(aiptek->usbdev, 875 usb_sndctrlpipe(aiptek->usbdev, 0), 876 USB_REQ_SET_REPORT, 877 USB_TYPE_CLASS | USB_RECIP_INTERFACE | 878 USB_DIR_OUT, (report_type << 8) + report_id, 879 aiptek->ifnum, buffer, size, 5000); 880 } 881 882 static int 883 aiptek_get_report(struct aiptek *aiptek, 884 unsigned char report_type, 885 unsigned char report_id, void *buffer, int size) 886 { 887 return usb_control_msg(aiptek->usbdev, 888 usb_rcvctrlpipe(aiptek->usbdev, 0), 889 USB_REQ_GET_REPORT, 890 USB_TYPE_CLASS | USB_RECIP_INTERFACE | 891 USB_DIR_IN, (report_type << 8) + report_id, 892 aiptek->ifnum, buffer, size, 5000); 893 } 894 895 /*********************************************************************** 896 * Send a command to the tablet. 897 */ 898 static int 899 aiptek_command(struct aiptek *aiptek, unsigned char command, unsigned char data) 900 { 901 const int sizeof_buf = 3 * sizeof(u8); 902 int ret; 903 u8 *buf; 904 905 buf = kmalloc(sizeof_buf, GFP_KERNEL); 906 if (!buf) 907 return -ENOMEM; 908 909 buf[0] = 2; 910 buf[1] = command; 911 buf[2] = data; 912 913 if ((ret = 914 aiptek_set_report(aiptek, 3, 2, buf, sizeof_buf)) != sizeof_buf) { 915 dbg("aiptek_program: failed, tried to send: 0x%02x 0x%02x", 916 command, data); 917 } 918 kfree(buf); 919 return ret < 0 ? ret : 0; 920 } 921 922 /*********************************************************************** 923 * Retrieve information from the tablet. Querying info is defined as first 924 * sending the {command,data} sequence as a command, followed by a wait 925 * (aka, "programmaticDelay") and then a "read" request. 926 */ 927 static int 928 aiptek_query(struct aiptek *aiptek, unsigned char command, unsigned char data) 929 { 930 const int sizeof_buf = 3 * sizeof(u8); 931 int ret; 932 u8 *buf; 933 934 buf = kmalloc(sizeof_buf, GFP_KERNEL); 935 if (!buf) 936 return -ENOMEM; 937 938 buf[0] = 2; 939 buf[1] = command; 940 buf[2] = data; 941 942 if (aiptek_command(aiptek, command, data) != 0) { 943 kfree(buf); 944 return -EIO; 945 } 946 msleep(aiptek->curSetting.programmableDelay); 947 948 if ((ret = 949 aiptek_get_report(aiptek, 3, 2, buf, sizeof_buf)) != sizeof_buf) { 950 dbg("aiptek_query failed: returned 0x%02x 0x%02x 0x%02x", 951 buf[0], buf[1], buf[2]); 952 ret = -EIO; 953 } else { 954 ret = get_unaligned_le16(buf + 1); 955 } 956 kfree(buf); 957 return ret; 958 } 959 960 /*********************************************************************** 961 * Program the tablet into either absolute or relative mode. 962 * We also get information about the tablet's size. 963 */ 964 static int aiptek_program_tablet(struct aiptek *aiptek) 965 { 966 int ret; 967 /* Execute Resolution500LPI */ 968 if ((ret = aiptek_command(aiptek, 0x18, 0x04)) < 0) 969 return ret; 970 971 /* Query getModelCode */ 972 if ((ret = aiptek_query(aiptek, 0x02, 0x00)) < 0) 973 return ret; 974 aiptek->features.modelCode = ret & 0xff; 975 976 /* Query getODMCode */ 977 if ((ret = aiptek_query(aiptek, 0x03, 0x00)) < 0) 978 return ret; 979 aiptek->features.odmCode = ret; 980 981 /* Query getFirmwareCode */ 982 if ((ret = aiptek_query(aiptek, 0x04, 0x00)) < 0) 983 return ret; 984 aiptek->features.firmwareCode = ret; 985 986 /* Query getXextension */ 987 if ((ret = aiptek_query(aiptek, 0x01, 0x00)) < 0) 988 return ret; 989 input_set_abs_params(aiptek->inputdev, ABS_X, 0, ret - 1, 0, 0); 990 991 /* Query getYextension */ 992 if ((ret = aiptek_query(aiptek, 0x01, 0x01)) < 0) 993 return ret; 994 input_set_abs_params(aiptek->inputdev, ABS_Y, 0, ret - 1, 0, 0); 995 996 /* Query getPressureLevels */ 997 if ((ret = aiptek_query(aiptek, 0x08, 0x00)) < 0) 998 return ret; 999 input_set_abs_params(aiptek->inputdev, ABS_PRESSURE, 0, ret - 1, 0, 0); 1000 1001 /* Depending on whether we are in absolute or relative mode, we will 1002 * do a switchToTablet(absolute) or switchToMouse(relative) command. 1003 */ 1004 if (aiptek->curSetting.coordinateMode == 1005 AIPTEK_COORDINATE_ABSOLUTE_MODE) { 1006 /* Execute switchToTablet */ 1007 if ((ret = aiptek_command(aiptek, 0x10, 0x01)) < 0) { 1008 return ret; 1009 } 1010 } else { 1011 /* Execute switchToMouse */ 1012 if ((ret = aiptek_command(aiptek, 0x10, 0x00)) < 0) { 1013 return ret; 1014 } 1015 } 1016 1017 /* Enable the macro keys */ 1018 if ((ret = aiptek_command(aiptek, 0x11, 0x02)) < 0) 1019 return ret; 1020 #if 0 1021 /* Execute FilterOn */ 1022 if ((ret = aiptek_command(aiptek, 0x17, 0x00)) < 0) 1023 return ret; 1024 #endif 1025 1026 /* Execute AutoGainOn */ 1027 if ((ret = aiptek_command(aiptek, 0x12, 0xff)) < 0) 1028 return ret; 1029 1030 /* Reset the eventCount, so we track events from last (re)programming 1031 */ 1032 aiptek->diagnostic = AIPTEK_DIAGNOSTIC_NA; 1033 aiptek->eventCount = 0; 1034 1035 return 0; 1036 } 1037 1038 /*********************************************************************** 1039 * Sysfs functions. Sysfs prefers that individually-tunable parameters 1040 * exist in their separate pseudo-files. Summary data that is immutable 1041 * may exist in a singular file so long as you don't define a writeable 1042 * interface. 1043 */ 1044 1045 /*********************************************************************** 1046 * support the 'size' file -- display support 1047 */ 1048 static ssize_t show_tabletSize(struct device *dev, struct device_attribute *attr, char *buf) 1049 { 1050 struct aiptek *aiptek = dev_get_drvdata(dev); 1051 1052 return snprintf(buf, PAGE_SIZE, "%dx%d\n", 1053 input_abs_get_max(aiptek->inputdev, ABS_X) + 1, 1054 input_abs_get_max(aiptek->inputdev, ABS_Y) + 1); 1055 } 1056 1057 /* These structs define the sysfs files, param #1 is the name of the 1058 * file, param 2 is the file permissions, param 3 & 4 are to the 1059 * output generator and input parser routines. Absence of a routine is 1060 * permitted -- it only means can't either 'cat' the file, or send data 1061 * to it. 1062 */ 1063 static DEVICE_ATTR(size, S_IRUGO, show_tabletSize, NULL); 1064 1065 /*********************************************************************** 1066 * support routines for the 'pointer_mode' file. Note that this file 1067 * both displays current setting and allows reprogramming. 1068 */ 1069 static struct aiptek_map pointer_mode_map[] = { 1070 { "stylus", AIPTEK_POINTER_ONLY_STYLUS_MODE }, 1071 { "mouse", AIPTEK_POINTER_ONLY_MOUSE_MODE }, 1072 { "either", AIPTEK_POINTER_EITHER_MODE }, 1073 { NULL, AIPTEK_INVALID_VALUE } 1074 }; 1075 1076 static ssize_t show_tabletPointerMode(struct device *dev, struct device_attribute *attr, char *buf) 1077 { 1078 struct aiptek *aiptek = dev_get_drvdata(dev); 1079 1080 return snprintf(buf, PAGE_SIZE, "%s\n", 1081 map_val_to_str(pointer_mode_map, 1082 aiptek->curSetting.pointerMode)); 1083 } 1084 1085 static ssize_t 1086 store_tabletPointerMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) 1087 { 1088 struct aiptek *aiptek = dev_get_drvdata(dev); 1089 int new_mode = map_str_to_val(pointer_mode_map, buf, count); 1090 1091 if (new_mode == AIPTEK_INVALID_VALUE) 1092 return -EINVAL; 1093 1094 aiptek->newSetting.pointerMode = new_mode; 1095 return count; 1096 } 1097 1098 static DEVICE_ATTR(pointer_mode, 1099 S_IRUGO | S_IWUSR, 1100 show_tabletPointerMode, store_tabletPointerMode); 1101 1102 /*********************************************************************** 1103 * support routines for the 'coordinate_mode' file. Note that this file 1104 * both displays current setting and allows reprogramming. 1105 */ 1106 1107 static struct aiptek_map coordinate_mode_map[] = { 1108 { "absolute", AIPTEK_COORDINATE_ABSOLUTE_MODE }, 1109 { "relative", AIPTEK_COORDINATE_RELATIVE_MODE }, 1110 { NULL, AIPTEK_INVALID_VALUE } 1111 }; 1112 1113 static ssize_t show_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, char *buf) 1114 { 1115 struct aiptek *aiptek = dev_get_drvdata(dev); 1116 1117 return snprintf(buf, PAGE_SIZE, "%s\n", 1118 map_val_to_str(coordinate_mode_map, 1119 aiptek->curSetting.coordinateMode)); 1120 } 1121 1122 static ssize_t 1123 store_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) 1124 { 1125 struct aiptek *aiptek = dev_get_drvdata(dev); 1126 int new_mode = map_str_to_val(coordinate_mode_map, buf, count); 1127 1128 if (new_mode == AIPTEK_INVALID_VALUE) 1129 return -EINVAL; 1130 1131 aiptek->newSetting.coordinateMode = new_mode; 1132 return count; 1133 } 1134 1135 static DEVICE_ATTR(coordinate_mode, 1136 S_IRUGO | S_IWUSR, 1137 show_tabletCoordinateMode, store_tabletCoordinateMode); 1138 1139 /*********************************************************************** 1140 * support routines for the 'tool_mode' file. Note that this file 1141 * both displays current setting and allows reprogramming. 1142 */ 1143 1144 static struct aiptek_map tool_mode_map[] = { 1145 { "mouse", AIPTEK_TOOL_BUTTON_MOUSE_MODE }, 1146 { "eraser", AIPTEK_TOOL_BUTTON_ERASER_MODE }, 1147 { "pencil", AIPTEK_TOOL_BUTTON_PENCIL_MODE }, 1148 { "pen", AIPTEK_TOOL_BUTTON_PEN_MODE }, 1149 { "brush", AIPTEK_TOOL_BUTTON_BRUSH_MODE }, 1150 { "airbrush", AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE }, 1151 { "lens", AIPTEK_TOOL_BUTTON_LENS_MODE }, 1152 { NULL, AIPTEK_INVALID_VALUE } 1153 }; 1154 1155 static ssize_t show_tabletToolMode(struct device *dev, struct device_attribute *attr, char *buf) 1156 { 1157 struct aiptek *aiptek = dev_get_drvdata(dev); 1158 1159 return snprintf(buf, PAGE_SIZE, "%s\n", 1160 map_val_to_str(tool_mode_map, 1161 aiptek->curSetting.toolMode)); 1162 } 1163 1164 static ssize_t 1165 store_tabletToolMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) 1166 { 1167 struct aiptek *aiptek = dev_get_drvdata(dev); 1168 int new_mode = map_str_to_val(tool_mode_map, buf, count); 1169 1170 if (new_mode == AIPTEK_INVALID_VALUE) 1171 return -EINVAL; 1172 1173 aiptek->newSetting.toolMode = new_mode; 1174 return count; 1175 } 1176 1177 static DEVICE_ATTR(tool_mode, 1178 S_IRUGO | S_IWUSR, 1179 show_tabletToolMode, store_tabletToolMode); 1180 1181 /*********************************************************************** 1182 * support routines for the 'xtilt' file. Note that this file 1183 * both displays current setting and allows reprogramming. 1184 */ 1185 static ssize_t show_tabletXtilt(struct device *dev, struct device_attribute *attr, char *buf) 1186 { 1187 struct aiptek *aiptek = dev_get_drvdata(dev); 1188 1189 if (aiptek->curSetting.xTilt == AIPTEK_TILT_DISABLE) { 1190 return snprintf(buf, PAGE_SIZE, "disable\n"); 1191 } else { 1192 return snprintf(buf, PAGE_SIZE, "%d\n", 1193 aiptek->curSetting.xTilt); 1194 } 1195 } 1196 1197 static ssize_t 1198 store_tabletXtilt(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) 1199 { 1200 struct aiptek *aiptek = dev_get_drvdata(dev); 1201 long x; 1202 1203 if (strict_strtol(buf, 10, &x)) { 1204 size_t len = buf[count - 1] == '\n' ? count - 1 : count; 1205 1206 if (strncmp(buf, "disable", len)) 1207 return -EINVAL; 1208 1209 aiptek->newSetting.xTilt = AIPTEK_TILT_DISABLE; 1210 } else { 1211 if (x < AIPTEK_TILT_MIN || x > AIPTEK_TILT_MAX) 1212 return -EINVAL; 1213 1214 aiptek->newSetting.xTilt = x; 1215 } 1216 1217 return count; 1218 } 1219 1220 static DEVICE_ATTR(xtilt, 1221 S_IRUGO | S_IWUSR, show_tabletXtilt, store_tabletXtilt); 1222 1223 /*********************************************************************** 1224 * support routines for the 'ytilt' file. Note that this file 1225 * both displays current setting and allows reprogramming. 1226 */ 1227 static ssize_t show_tabletYtilt(struct device *dev, struct device_attribute *attr, char *buf) 1228 { 1229 struct aiptek *aiptek = dev_get_drvdata(dev); 1230 1231 if (aiptek->curSetting.yTilt == AIPTEK_TILT_DISABLE) { 1232 return snprintf(buf, PAGE_SIZE, "disable\n"); 1233 } else { 1234 return snprintf(buf, PAGE_SIZE, "%d\n", 1235 aiptek->curSetting.yTilt); 1236 } 1237 } 1238 1239 static ssize_t 1240 store_tabletYtilt(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) 1241 { 1242 struct aiptek *aiptek = dev_get_drvdata(dev); 1243 long y; 1244 1245 if (strict_strtol(buf, 10, &y)) { 1246 size_t len = buf[count - 1] == '\n' ? count - 1 : count; 1247 1248 if (strncmp(buf, "disable", len)) 1249 return -EINVAL; 1250 1251 aiptek->newSetting.yTilt = AIPTEK_TILT_DISABLE; 1252 } else { 1253 if (y < AIPTEK_TILT_MIN || y > AIPTEK_TILT_MAX) 1254 return -EINVAL; 1255 1256 aiptek->newSetting.yTilt = y; 1257 } 1258 1259 return count; 1260 } 1261 1262 static DEVICE_ATTR(ytilt, 1263 S_IRUGO | S_IWUSR, show_tabletYtilt, store_tabletYtilt); 1264 1265 /*********************************************************************** 1266 * support routines for the 'jitter' file. Note that this file 1267 * both displays current setting and allows reprogramming. 1268 */ 1269 static ssize_t show_tabletJitterDelay(struct device *dev, struct device_attribute *attr, char *buf) 1270 { 1271 struct aiptek *aiptek = dev_get_drvdata(dev); 1272 1273 return snprintf(buf, PAGE_SIZE, "%d\n", aiptek->curSetting.jitterDelay); 1274 } 1275 1276 static ssize_t 1277 store_tabletJitterDelay(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) 1278 { 1279 struct aiptek *aiptek = dev_get_drvdata(dev); 1280 long j; 1281 1282 if (strict_strtol(buf, 10, &j)) 1283 return -EINVAL; 1284 1285 aiptek->newSetting.jitterDelay = (int)j; 1286 return count; 1287 } 1288 1289 static DEVICE_ATTR(jitter, 1290 S_IRUGO | S_IWUSR, 1291 show_tabletJitterDelay, store_tabletJitterDelay); 1292 1293 /*********************************************************************** 1294 * support routines for the 'delay' file. Note that this file 1295 * both displays current setting and allows reprogramming. 1296 */ 1297 static ssize_t show_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr, char *buf) 1298 { 1299 struct aiptek *aiptek = dev_get_drvdata(dev); 1300 1301 return snprintf(buf, PAGE_SIZE, "%d\n", 1302 aiptek->curSetting.programmableDelay); 1303 } 1304 1305 static ssize_t 1306 store_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) 1307 { 1308 struct aiptek *aiptek = dev_get_drvdata(dev); 1309 long d; 1310 1311 if (strict_strtol(buf, 10, &d)) 1312 return -EINVAL; 1313 1314 aiptek->newSetting.programmableDelay = (int)d; 1315 return count; 1316 } 1317 1318 static DEVICE_ATTR(delay, 1319 S_IRUGO | S_IWUSR, 1320 show_tabletProgrammableDelay, store_tabletProgrammableDelay); 1321 1322 /*********************************************************************** 1323 * support routines for the 'event_count' file. Note that this file 1324 * only displays current setting. 1325 */ 1326 static ssize_t show_tabletEventsReceived(struct device *dev, struct device_attribute *attr, char *buf) 1327 { 1328 struct aiptek *aiptek = dev_get_drvdata(dev); 1329 1330 return snprintf(buf, PAGE_SIZE, "%ld\n", aiptek->eventCount); 1331 } 1332 1333 static DEVICE_ATTR(event_count, S_IRUGO, show_tabletEventsReceived, NULL); 1334 1335 /*********************************************************************** 1336 * support routines for the 'diagnostic' file. Note that this file 1337 * only displays current setting. 1338 */ 1339 static ssize_t show_tabletDiagnosticMessage(struct device *dev, struct device_attribute *attr, char *buf) 1340 { 1341 struct aiptek *aiptek = dev_get_drvdata(dev); 1342 char *retMsg; 1343 1344 switch (aiptek->diagnostic) { 1345 case AIPTEK_DIAGNOSTIC_NA: 1346 retMsg = "no errors\n"; 1347 break; 1348 1349 case AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE: 1350 retMsg = "Error: receiving relative reports\n"; 1351 break; 1352 1353 case AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE: 1354 retMsg = "Error: receiving absolute reports\n"; 1355 break; 1356 1357 case AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED: 1358 if (aiptek->curSetting.pointerMode == 1359 AIPTEK_POINTER_ONLY_MOUSE_MODE) { 1360 retMsg = "Error: receiving stylus reports\n"; 1361 } else { 1362 retMsg = "Error: receiving mouse reports\n"; 1363 } 1364 break; 1365 1366 default: 1367 return 0; 1368 } 1369 return snprintf(buf, PAGE_SIZE, retMsg); 1370 } 1371 1372 static DEVICE_ATTR(diagnostic, S_IRUGO, show_tabletDiagnosticMessage, NULL); 1373 1374 /*********************************************************************** 1375 * support routines for the 'stylus_upper' file. Note that this file 1376 * both displays current setting and allows for setting changing. 1377 */ 1378 1379 static struct aiptek_map stylus_button_map[] = { 1380 { "upper", AIPTEK_STYLUS_UPPER_BUTTON }, 1381 { "lower", AIPTEK_STYLUS_LOWER_BUTTON }, 1382 { NULL, AIPTEK_INVALID_VALUE } 1383 }; 1384 1385 static ssize_t show_tabletStylusUpper(struct device *dev, struct device_attribute *attr, char *buf) 1386 { 1387 struct aiptek *aiptek = dev_get_drvdata(dev); 1388 1389 return snprintf(buf, PAGE_SIZE, "%s\n", 1390 map_val_to_str(stylus_button_map, 1391 aiptek->curSetting.stylusButtonUpper)); 1392 } 1393 1394 static ssize_t 1395 store_tabletStylusUpper(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) 1396 { 1397 struct aiptek *aiptek = dev_get_drvdata(dev); 1398 int new_button = map_str_to_val(stylus_button_map, buf, count); 1399 1400 if (new_button == AIPTEK_INVALID_VALUE) 1401 return -EINVAL; 1402 1403 aiptek->newSetting.stylusButtonUpper = new_button; 1404 return count; 1405 } 1406 1407 static DEVICE_ATTR(stylus_upper, 1408 S_IRUGO | S_IWUSR, 1409 show_tabletStylusUpper, store_tabletStylusUpper); 1410 1411 /*********************************************************************** 1412 * support routines for the 'stylus_lower' file. Note that this file 1413 * both displays current setting and allows for setting changing. 1414 */ 1415 1416 static ssize_t show_tabletStylusLower(struct device *dev, struct device_attribute *attr, char *buf) 1417 { 1418 struct aiptek *aiptek = dev_get_drvdata(dev); 1419 1420 return snprintf(buf, PAGE_SIZE, "%s\n", 1421 map_val_to_str(stylus_button_map, 1422 aiptek->curSetting.stylusButtonLower)); 1423 } 1424 1425 static ssize_t 1426 store_tabletStylusLower(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) 1427 { 1428 struct aiptek *aiptek = dev_get_drvdata(dev); 1429 int new_button = map_str_to_val(stylus_button_map, buf, count); 1430 1431 if (new_button == AIPTEK_INVALID_VALUE) 1432 return -EINVAL; 1433 1434 aiptek->newSetting.stylusButtonLower = new_button; 1435 return count; 1436 } 1437 1438 static DEVICE_ATTR(stylus_lower, 1439 S_IRUGO | S_IWUSR, 1440 show_tabletStylusLower, store_tabletStylusLower); 1441 1442 /*********************************************************************** 1443 * support routines for the 'mouse_left' file. Note that this file 1444 * both displays current setting and allows for setting changing. 1445 */ 1446 1447 static struct aiptek_map mouse_button_map[] = { 1448 { "left", AIPTEK_MOUSE_LEFT_BUTTON }, 1449 { "middle", AIPTEK_MOUSE_MIDDLE_BUTTON }, 1450 { "right", AIPTEK_MOUSE_RIGHT_BUTTON }, 1451 { NULL, AIPTEK_INVALID_VALUE } 1452 }; 1453 1454 static ssize_t show_tabletMouseLeft(struct device *dev, struct device_attribute *attr, char *buf) 1455 { 1456 struct aiptek *aiptek = dev_get_drvdata(dev); 1457 1458 return snprintf(buf, PAGE_SIZE, "%s\n", 1459 map_val_to_str(mouse_button_map, 1460 aiptek->curSetting.mouseButtonLeft)); 1461 } 1462 1463 static ssize_t 1464 store_tabletMouseLeft(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) 1465 { 1466 struct aiptek *aiptek = dev_get_drvdata(dev); 1467 int new_button = map_str_to_val(mouse_button_map, buf, count); 1468 1469 if (new_button == AIPTEK_INVALID_VALUE) 1470 return -EINVAL; 1471 1472 aiptek->newSetting.mouseButtonLeft = new_button; 1473 return count; 1474 } 1475 1476 static DEVICE_ATTR(mouse_left, 1477 S_IRUGO | S_IWUSR, 1478 show_tabletMouseLeft, store_tabletMouseLeft); 1479 1480 /*********************************************************************** 1481 * support routines for the 'mouse_middle' file. Note that this file 1482 * both displays current setting and allows for setting changing. 1483 */ 1484 static ssize_t show_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, char *buf) 1485 { 1486 struct aiptek *aiptek = dev_get_drvdata(dev); 1487 1488 return snprintf(buf, PAGE_SIZE, "%s\n", 1489 map_val_to_str(mouse_button_map, 1490 aiptek->curSetting.mouseButtonMiddle)); 1491 } 1492 1493 static ssize_t 1494 store_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) 1495 { 1496 struct aiptek *aiptek = dev_get_drvdata(dev); 1497 int new_button = map_str_to_val(mouse_button_map, buf, count); 1498 1499 if (new_button == AIPTEK_INVALID_VALUE) 1500 return -EINVAL; 1501 1502 aiptek->newSetting.mouseButtonMiddle = new_button; 1503 return count; 1504 } 1505 1506 static DEVICE_ATTR(mouse_middle, 1507 S_IRUGO | S_IWUSR, 1508 show_tabletMouseMiddle, store_tabletMouseMiddle); 1509 1510 /*********************************************************************** 1511 * support routines for the 'mouse_right' file. Note that this file 1512 * both displays current setting and allows for setting changing. 1513 */ 1514 static ssize_t show_tabletMouseRight(struct device *dev, struct device_attribute *attr, char *buf) 1515 { 1516 struct aiptek *aiptek = dev_get_drvdata(dev); 1517 1518 return snprintf(buf, PAGE_SIZE, "%s\n", 1519 map_val_to_str(mouse_button_map, 1520 aiptek->curSetting.mouseButtonRight)); 1521 } 1522 1523 static ssize_t 1524 store_tabletMouseRight(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) 1525 { 1526 struct aiptek *aiptek = dev_get_drvdata(dev); 1527 int new_button = map_str_to_val(mouse_button_map, buf, count); 1528 1529 if (new_button == AIPTEK_INVALID_VALUE) 1530 return -EINVAL; 1531 1532 aiptek->newSetting.mouseButtonRight = new_button; 1533 return count; 1534 } 1535 1536 static DEVICE_ATTR(mouse_right, 1537 S_IRUGO | S_IWUSR, 1538 show_tabletMouseRight, store_tabletMouseRight); 1539 1540 /*********************************************************************** 1541 * support routines for the 'wheel' file. Note that this file 1542 * both displays current setting and allows for setting changing. 1543 */ 1544 static ssize_t show_tabletWheel(struct device *dev, struct device_attribute *attr, char *buf) 1545 { 1546 struct aiptek *aiptek = dev_get_drvdata(dev); 1547 1548 if (aiptek->curSetting.wheel == AIPTEK_WHEEL_DISABLE) { 1549 return snprintf(buf, PAGE_SIZE, "disable\n"); 1550 } else { 1551 return snprintf(buf, PAGE_SIZE, "%d\n", 1552 aiptek->curSetting.wheel); 1553 } 1554 } 1555 1556 static ssize_t 1557 store_tabletWheel(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) 1558 { 1559 struct aiptek *aiptek = dev_get_drvdata(dev); 1560 long w; 1561 1562 if (strict_strtol(buf, 10, &w)) return -EINVAL; 1563 1564 aiptek->newSetting.wheel = (int)w; 1565 return count; 1566 } 1567 1568 static DEVICE_ATTR(wheel, 1569 S_IRUGO | S_IWUSR, show_tabletWheel, store_tabletWheel); 1570 1571 /*********************************************************************** 1572 * support routines for the 'execute' file. Note that this file 1573 * both displays current setting and allows for setting changing. 1574 */ 1575 static ssize_t show_tabletExecute(struct device *dev, struct device_attribute *attr, char *buf) 1576 { 1577 /* There is nothing useful to display, so a one-line manual 1578 * is in order... 1579 */ 1580 return snprintf(buf, PAGE_SIZE, 1581 "Write anything to this file to program your tablet.\n"); 1582 } 1583 1584 static ssize_t 1585 store_tabletExecute(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) 1586 { 1587 struct aiptek *aiptek = dev_get_drvdata(dev); 1588 1589 /* We do not care what you write to this file. Merely the action 1590 * of writing to this file triggers a tablet reprogramming. 1591 */ 1592 memcpy(&aiptek->curSetting, &aiptek->newSetting, 1593 sizeof(struct aiptek_settings)); 1594 1595 if (aiptek_program_tablet(aiptek) < 0) 1596 return -EIO; 1597 1598 return count; 1599 } 1600 1601 static DEVICE_ATTR(execute, 1602 S_IRUGO | S_IWUSR, show_tabletExecute, store_tabletExecute); 1603 1604 /*********************************************************************** 1605 * support routines for the 'odm_code' file. Note that this file 1606 * only displays current setting. 1607 */ 1608 static ssize_t show_tabletODMCode(struct device *dev, struct device_attribute *attr, char *buf) 1609 { 1610 struct aiptek *aiptek = dev_get_drvdata(dev); 1611 1612 return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.odmCode); 1613 } 1614 1615 static DEVICE_ATTR(odm_code, S_IRUGO, show_tabletODMCode, NULL); 1616 1617 /*********************************************************************** 1618 * support routines for the 'model_code' file. Note that this file 1619 * only displays current setting. 1620 */ 1621 static ssize_t show_tabletModelCode(struct device *dev, struct device_attribute *attr, char *buf) 1622 { 1623 struct aiptek *aiptek = dev_get_drvdata(dev); 1624 1625 return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.modelCode); 1626 } 1627 1628 static DEVICE_ATTR(model_code, S_IRUGO, show_tabletModelCode, NULL); 1629 1630 /*********************************************************************** 1631 * support routines for the 'firmware_code' file. Note that this file 1632 * only displays current setting. 1633 */ 1634 static ssize_t show_firmwareCode(struct device *dev, struct device_attribute *attr, char *buf) 1635 { 1636 struct aiptek *aiptek = dev_get_drvdata(dev); 1637 1638 return snprintf(buf, PAGE_SIZE, "%04x\n", 1639 aiptek->features.firmwareCode); 1640 } 1641 1642 static DEVICE_ATTR(firmware_code, S_IRUGO, show_firmwareCode, NULL); 1643 1644 static struct attribute *aiptek_attributes[] = { 1645 &dev_attr_size.attr, 1646 &dev_attr_pointer_mode.attr, 1647 &dev_attr_coordinate_mode.attr, 1648 &dev_attr_tool_mode.attr, 1649 &dev_attr_xtilt.attr, 1650 &dev_attr_ytilt.attr, 1651 &dev_attr_jitter.attr, 1652 &dev_attr_delay.attr, 1653 &dev_attr_event_count.attr, 1654 &dev_attr_diagnostic.attr, 1655 &dev_attr_odm_code.attr, 1656 &dev_attr_model_code.attr, 1657 &dev_attr_firmware_code.attr, 1658 &dev_attr_stylus_lower.attr, 1659 &dev_attr_stylus_upper.attr, 1660 &dev_attr_mouse_left.attr, 1661 &dev_attr_mouse_middle.attr, 1662 &dev_attr_mouse_right.attr, 1663 &dev_attr_wheel.attr, 1664 &dev_attr_execute.attr, 1665 NULL 1666 }; 1667 1668 static struct attribute_group aiptek_attribute_group = { 1669 .attrs = aiptek_attributes, 1670 }; 1671 1672 /*********************************************************************** 1673 * This routine is called when a tablet has been identified. It basically 1674 * sets up the tablet and the driver's internal structures. 1675 */ 1676 static int 1677 aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) 1678 { 1679 struct usb_device *usbdev = interface_to_usbdev(intf); 1680 struct usb_endpoint_descriptor *endpoint; 1681 struct aiptek *aiptek; 1682 struct input_dev *inputdev; 1683 int i; 1684 int speeds[] = { 0, 1685 AIPTEK_PROGRAMMABLE_DELAY_50, 1686 AIPTEK_PROGRAMMABLE_DELAY_400, 1687 AIPTEK_PROGRAMMABLE_DELAY_25, 1688 AIPTEK_PROGRAMMABLE_DELAY_100, 1689 AIPTEK_PROGRAMMABLE_DELAY_200, 1690 AIPTEK_PROGRAMMABLE_DELAY_300 1691 }; 1692 int err = -ENOMEM; 1693 1694 /* programmableDelay is where the command-line specified 1695 * delay is kept. We make it the first element of speeds[], 1696 * so therefore, your override speed is tried first, then the 1697 * remainder. Note that the default value of 400ms will be tried 1698 * if you do not specify any command line parameter. 1699 */ 1700 speeds[0] = programmableDelay; 1701 1702 aiptek = kzalloc(sizeof(struct aiptek), GFP_KERNEL); 1703 inputdev = input_allocate_device(); 1704 if (!aiptek || !inputdev) { 1705 dev_warn(&intf->dev, 1706 "cannot allocate memory or input device\n"); 1707 goto fail1; 1708 } 1709 1710 aiptek->data = usb_alloc_coherent(usbdev, AIPTEK_PACKET_LENGTH, 1711 GFP_ATOMIC, &aiptek->data_dma); 1712 if (!aiptek->data) { 1713 dev_warn(&intf->dev, "cannot allocate usb buffer\n"); 1714 goto fail1; 1715 } 1716 1717 aiptek->urb = usb_alloc_urb(0, GFP_KERNEL); 1718 if (!aiptek->urb) { 1719 dev_warn(&intf->dev, "cannot allocate urb\n"); 1720 goto fail2; 1721 } 1722 1723 aiptek->inputdev = inputdev; 1724 aiptek->usbdev = usbdev; 1725 aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber; 1726 aiptek->inDelay = 0; 1727 aiptek->endDelay = 0; 1728 aiptek->previousJitterable = 0; 1729 aiptek->lastMacro = -1; 1730 1731 /* Set up the curSettings struct. Said struct contains the current 1732 * programmable parameters. The newSetting struct contains changes 1733 * the user makes to the settings via the sysfs interface. Those 1734 * changes are not "committed" to curSettings until the user 1735 * writes to the sysfs/.../execute file. 1736 */ 1737 aiptek->curSetting.pointerMode = AIPTEK_POINTER_EITHER_MODE; 1738 aiptek->curSetting.coordinateMode = AIPTEK_COORDINATE_ABSOLUTE_MODE; 1739 aiptek->curSetting.toolMode = AIPTEK_TOOL_BUTTON_PEN_MODE; 1740 aiptek->curSetting.xTilt = AIPTEK_TILT_DISABLE; 1741 aiptek->curSetting.yTilt = AIPTEK_TILT_DISABLE; 1742 aiptek->curSetting.mouseButtonLeft = AIPTEK_MOUSE_LEFT_BUTTON; 1743 aiptek->curSetting.mouseButtonMiddle = AIPTEK_MOUSE_MIDDLE_BUTTON; 1744 aiptek->curSetting.mouseButtonRight = AIPTEK_MOUSE_RIGHT_BUTTON; 1745 aiptek->curSetting.stylusButtonUpper = AIPTEK_STYLUS_UPPER_BUTTON; 1746 aiptek->curSetting.stylusButtonLower = AIPTEK_STYLUS_LOWER_BUTTON; 1747 aiptek->curSetting.jitterDelay = jitterDelay; 1748 aiptek->curSetting.programmableDelay = programmableDelay; 1749 1750 /* Both structs should have equivalent settings 1751 */ 1752 aiptek->newSetting = aiptek->curSetting; 1753 1754 /* Determine the usb devices' physical path. 1755 * Asketh not why we always pretend we're using "../input0", 1756 * but I suspect this will have to be refactored one 1757 * day if a single USB device can be a keyboard & a mouse 1758 * & a tablet, and the inputX number actually will tell 1759 * us something... 1760 */ 1761 usb_make_path(usbdev, aiptek->features.usbPath, 1762 sizeof(aiptek->features.usbPath)); 1763 strlcat(aiptek->features.usbPath, "/input0", 1764 sizeof(aiptek->features.usbPath)); 1765 1766 /* Set up client data, pointers to open and close routines 1767 * for the input device. 1768 */ 1769 inputdev->name = "Aiptek"; 1770 inputdev->phys = aiptek->features.usbPath; 1771 usb_to_input_id(usbdev, &inputdev->id); 1772 inputdev->dev.parent = &intf->dev; 1773 1774 input_set_drvdata(inputdev, aiptek); 1775 1776 inputdev->open = aiptek_open; 1777 inputdev->close = aiptek_close; 1778 1779 /* Now program the capacities of the tablet, in terms of being 1780 * an input device. 1781 */ 1782 for (i = 0; i < ARRAY_SIZE(eventTypes); ++i) 1783 __set_bit(eventTypes[i], inputdev->evbit); 1784 1785 for (i = 0; i < ARRAY_SIZE(absEvents); ++i) 1786 __set_bit(absEvents[i], inputdev->absbit); 1787 1788 for (i = 0; i < ARRAY_SIZE(relEvents); ++i) 1789 __set_bit(relEvents[i], inputdev->relbit); 1790 1791 __set_bit(MSC_SERIAL, inputdev->mscbit); 1792 1793 /* Set up key and button codes */ 1794 for (i = 0; i < ARRAY_SIZE(buttonEvents); ++i) 1795 __set_bit(buttonEvents[i], inputdev->keybit); 1796 1797 for (i = 0; i < ARRAY_SIZE(macroKeyEvents); ++i) 1798 __set_bit(macroKeyEvents[i], inputdev->keybit); 1799 1800 /* 1801 * Program the input device coordinate capacities. We do not yet 1802 * know what maximum X, Y, and Z values are, so we're putting fake 1803 * values in. Later, we'll ask the tablet to put in the correct 1804 * values. 1805 */ 1806 input_set_abs_params(inputdev, ABS_X, 0, 2999, 0, 0); 1807 input_set_abs_params(inputdev, ABS_Y, 0, 2249, 0, 0); 1808 input_set_abs_params(inputdev, ABS_PRESSURE, 0, 511, 0, 0); 1809 input_set_abs_params(inputdev, ABS_TILT_X, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0); 1810 input_set_abs_params(inputdev, ABS_TILT_Y, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0); 1811 input_set_abs_params(inputdev, ABS_WHEEL, AIPTEK_WHEEL_MIN, AIPTEK_WHEEL_MAX - 1, 0, 0); 1812 1813 endpoint = &intf->altsetting[0].endpoint[0].desc; 1814 1815 /* Go set up our URB, which is called when the tablet receives 1816 * input. 1817 */ 1818 usb_fill_int_urb(aiptek->urb, 1819 aiptek->usbdev, 1820 usb_rcvintpipe(aiptek->usbdev, 1821 endpoint->bEndpointAddress), 1822 aiptek->data, 8, aiptek_irq, aiptek, 1823 endpoint->bInterval); 1824 1825 aiptek->urb->transfer_dma = aiptek->data_dma; 1826 aiptek->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; 1827 1828 /* Program the tablet. This sets the tablet up in the mode 1829 * specified in newSetting, and also queries the tablet's 1830 * physical capacities. 1831 * 1832 * Sanity check: if a tablet doesn't like the slow programmatic 1833 * delay, we often get sizes of 0x0. Let's use that as an indicator 1834 * to try faster delays, up to 25 ms. If that logic fails, well, you'll 1835 * have to explain to us how your tablet thinks it's 0x0, and yet that's 1836 * not an error :-) 1837 */ 1838 1839 for (i = 0; i < ARRAY_SIZE(speeds); ++i) { 1840 aiptek->curSetting.programmableDelay = speeds[i]; 1841 (void)aiptek_program_tablet(aiptek); 1842 if (input_abs_get_max(aiptek->inputdev, ABS_X) > 0) { 1843 dev_info(&intf->dev, 1844 "Aiptek using %d ms programming speed\n", 1845 aiptek->curSetting.programmableDelay); 1846 break; 1847 } 1848 } 1849 1850 /* Murphy says that some day someone will have a tablet that fails the 1851 above test. That's you, Frederic Rodrigo */ 1852 if (i == ARRAY_SIZE(speeds)) { 1853 dev_info(&intf->dev, 1854 "Aiptek tried all speeds, no sane response\n"); 1855 goto fail2; 1856 } 1857 1858 /* Associate this driver's struct with the usb interface. 1859 */ 1860 usb_set_intfdata(intf, aiptek); 1861 1862 /* Set up the sysfs files 1863 */ 1864 err = sysfs_create_group(&intf->dev.kobj, &aiptek_attribute_group); 1865 if (err) { 1866 dev_warn(&intf->dev, "cannot create sysfs group err: %d\n", 1867 err); 1868 goto fail3; 1869 } 1870 1871 /* Register the tablet as an Input Device 1872 */ 1873 err = input_register_device(aiptek->inputdev); 1874 if (err) { 1875 dev_warn(&intf->dev, 1876 "input_register_device returned err: %d\n", err); 1877 goto fail4; 1878 } 1879 return 0; 1880 1881 fail4: sysfs_remove_group(&intf->dev.kobj, &aiptek_attribute_group); 1882 fail3: usb_free_urb(aiptek->urb); 1883 fail2: usb_free_coherent(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data, 1884 aiptek->data_dma); 1885 fail1: usb_set_intfdata(intf, NULL); 1886 input_free_device(inputdev); 1887 kfree(aiptek); 1888 return err; 1889 } 1890 1891 /*********************************************************************** 1892 * Deal with tablet disconnecting from the system. 1893 */ 1894 static void aiptek_disconnect(struct usb_interface *intf) 1895 { 1896 struct aiptek *aiptek = usb_get_intfdata(intf); 1897 1898 /* Disassociate driver's struct with usb interface 1899 */ 1900 usb_set_intfdata(intf, NULL); 1901 if (aiptek != NULL) { 1902 /* Free & unhook everything from the system. 1903 */ 1904 usb_kill_urb(aiptek->urb); 1905 input_unregister_device(aiptek->inputdev); 1906 sysfs_remove_group(&intf->dev.kobj, &aiptek_attribute_group); 1907 usb_free_urb(aiptek->urb); 1908 usb_free_coherent(interface_to_usbdev(intf), 1909 AIPTEK_PACKET_LENGTH, 1910 aiptek->data, aiptek->data_dma); 1911 kfree(aiptek); 1912 } 1913 } 1914 1915 static struct usb_driver aiptek_driver = { 1916 .name = "aiptek", 1917 .probe = aiptek_probe, 1918 .disconnect = aiptek_disconnect, 1919 .id_table = aiptek_ids, 1920 }; 1921 1922 static int __init aiptek_init(void) 1923 { 1924 int result = usb_register(&aiptek_driver); 1925 if (result == 0) { 1926 printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" 1927 DRIVER_DESC "\n"); 1928 printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_AUTHOR "\n"); 1929 } 1930 return result; 1931 } 1932 1933 static void __exit aiptek_exit(void) 1934 { 1935 usb_deregister(&aiptek_driver); 1936 } 1937 1938 MODULE_AUTHOR(DRIVER_AUTHOR); 1939 MODULE_DESCRIPTION(DRIVER_DESC); 1940 MODULE_LICENSE("GPL"); 1941 1942 module_param(programmableDelay, int, 0); 1943 MODULE_PARM_DESC(programmableDelay, "delay used during tablet programming"); 1944 module_param(jitterDelay, int, 0); 1945 MODULE_PARM_DESC(jitterDelay, "stylus/mouse settlement delay"); 1946 1947 module_init(aiptek_init); 1948 module_exit(aiptek_exit); 1949