1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Copyright (c) 2001-2005 Edouard TISSERANT <edouard.tisserant@wanadoo.fr> 4 * Copyright (c) 2004-2005 Stephane VOLTZ <svoltz@numericable.fr> 5 * 6 * USB Acecad "Acecad Flair" tablet support 7 * 8 * Changelog: 9 * v3.2 - Added sysfs support 10 */ 11 12 /* 13 */ 14 15 #include <linux/kernel.h> 16 #include <linux/slab.h> 17 #include <linux/module.h> 18 #include <linux/usb/input.h> 19 20 MODULE_AUTHOR("Edouard TISSERANT <edouard.tisserant@wanadoo.fr>"); 21 MODULE_DESCRIPTION("USB Acecad Flair tablet driver"); 22 MODULE_LICENSE("GPL"); 23 24 #define USB_VENDOR_ID_ACECAD 0x0460 25 #define USB_DEVICE_ID_FLAIR 0x0004 26 #define USB_DEVICE_ID_302 0x0008 27 28 struct usb_acecad { 29 char name[128]; 30 char phys[64]; 31 struct usb_interface *intf; 32 struct input_dev *input; 33 struct urb *irq; 34 35 unsigned char *data; 36 dma_addr_t data_dma; 37 }; 38 39 static void usb_acecad_irq(struct urb *urb) 40 { 41 struct usb_acecad *acecad = urb->context; 42 unsigned char *data = acecad->data; 43 struct input_dev *dev = acecad->input; 44 struct usb_interface *intf = acecad->intf; 45 struct usb_device *udev = interface_to_usbdev(intf); 46 int prox, status; 47 48 switch (urb->status) { 49 case 0: 50 /* success */ 51 break; 52 case -ECONNRESET: 53 case -ENOENT: 54 case -ESHUTDOWN: 55 /* this urb is terminated, clean up */ 56 dev_dbg(&intf->dev, "%s - urb shutting down with status: %d\n", 57 __func__, urb->status); 58 return; 59 default: 60 dev_dbg(&intf->dev, "%s - nonzero urb status received: %d\n", 61 __func__, urb->status); 62 goto resubmit; 63 } 64 65 prox = (data[0] & 0x04) >> 2; 66 input_report_key(dev, BTN_TOOL_PEN, prox); 67 68 if (prox) { 69 int x = data[1] | (data[2] << 8); 70 int y = data[3] | (data[4] << 8); 71 /* Pressure should compute the same way for flair and 302 */ 72 int pressure = data[5] | (data[6] << 8); 73 int touch = data[0] & 0x01; 74 int stylus = (data[0] & 0x10) >> 4; 75 int stylus2 = (data[0] & 0x20) >> 5; 76 input_report_abs(dev, ABS_X, x); 77 input_report_abs(dev, ABS_Y, y); 78 input_report_abs(dev, ABS_PRESSURE, pressure); 79 input_report_key(dev, BTN_TOUCH, touch); 80 input_report_key(dev, BTN_STYLUS, stylus); 81 input_report_key(dev, BTN_STYLUS2, stylus2); 82 } 83 84 /* event termination */ 85 input_sync(dev); 86 87 resubmit: 88 status = usb_submit_urb(urb, GFP_ATOMIC); 89 if (status) 90 dev_err(&intf->dev, 91 "can't resubmit intr, %s-%s/input0, status %d\n", 92 udev->bus->bus_name, 93 udev->devpath, status); 94 } 95 96 static int usb_acecad_open(struct input_dev *dev) 97 { 98 struct usb_acecad *acecad = input_get_drvdata(dev); 99 100 acecad->irq->dev = interface_to_usbdev(acecad->intf); 101 if (usb_submit_urb(acecad->irq, GFP_KERNEL)) 102 return -EIO; 103 104 return 0; 105 } 106 107 static void usb_acecad_close(struct input_dev *dev) 108 { 109 struct usb_acecad *acecad = input_get_drvdata(dev); 110 111 usb_kill_urb(acecad->irq); 112 } 113 114 static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_id *id) 115 { 116 struct usb_device *dev = interface_to_usbdev(intf); 117 struct usb_host_interface *interface = intf->cur_altsetting; 118 struct usb_endpoint_descriptor *endpoint; 119 struct usb_acecad *acecad; 120 struct input_dev *input_dev; 121 int pipe, maxp; 122 int err; 123 124 if (interface->desc.bNumEndpoints != 1) 125 return -ENODEV; 126 127 endpoint = &interface->endpoint[0].desc; 128 129 if (!usb_endpoint_is_int_in(endpoint)) 130 return -ENODEV; 131 132 pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress); 133 maxp = usb_maxpacket(dev, pipe); 134 135 acecad = kzalloc(sizeof(struct usb_acecad), GFP_KERNEL); 136 input_dev = input_allocate_device(); 137 if (!acecad || !input_dev) { 138 err = -ENOMEM; 139 goto fail1; 140 } 141 142 acecad->data = usb_alloc_coherent(dev, 8, GFP_KERNEL, &acecad->data_dma); 143 if (!acecad->data) { 144 err= -ENOMEM; 145 goto fail1; 146 } 147 148 acecad->irq = usb_alloc_urb(0, GFP_KERNEL); 149 if (!acecad->irq) { 150 err = -ENOMEM; 151 goto fail2; 152 } 153 154 acecad->intf = intf; 155 acecad->input = input_dev; 156 157 if (dev->manufacturer) 158 strlcpy(acecad->name, dev->manufacturer, sizeof(acecad->name)); 159 160 if (dev->product) { 161 if (dev->manufacturer) 162 strlcat(acecad->name, " ", sizeof(acecad->name)); 163 strlcat(acecad->name, dev->product, sizeof(acecad->name)); 164 } 165 166 usb_make_path(dev, acecad->phys, sizeof(acecad->phys)); 167 strlcat(acecad->phys, "/input0", sizeof(acecad->phys)); 168 169 input_dev->name = acecad->name; 170 input_dev->phys = acecad->phys; 171 usb_to_input_id(dev, &input_dev->id); 172 input_dev->dev.parent = &intf->dev; 173 174 input_set_drvdata(input_dev, acecad); 175 176 input_dev->open = usb_acecad_open; 177 input_dev->close = usb_acecad_close; 178 179 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); 180 input_dev->keybit[BIT_WORD(BTN_DIGI)] = BIT_MASK(BTN_TOOL_PEN) | 181 BIT_MASK(BTN_TOUCH) | BIT_MASK(BTN_STYLUS) | 182 BIT_MASK(BTN_STYLUS2); 183 184 switch (id->driver_info) { 185 case 0: 186 input_set_abs_params(input_dev, ABS_X, 0, 5000, 4, 0); 187 input_set_abs_params(input_dev, ABS_Y, 0, 3750, 4, 0); 188 input_set_abs_params(input_dev, ABS_PRESSURE, 0, 512, 0, 0); 189 if (!strlen(acecad->name)) 190 snprintf(acecad->name, sizeof(acecad->name), 191 "USB Acecad Flair Tablet %04x:%04x", 192 le16_to_cpu(dev->descriptor.idVendor), 193 le16_to_cpu(dev->descriptor.idProduct)); 194 break; 195 196 case 1: 197 input_set_abs_params(input_dev, ABS_X, 0, 53000, 4, 0); 198 input_set_abs_params(input_dev, ABS_Y, 0, 2250, 4, 0); 199 input_set_abs_params(input_dev, ABS_PRESSURE, 0, 1024, 0, 0); 200 if (!strlen(acecad->name)) 201 snprintf(acecad->name, sizeof(acecad->name), 202 "USB Acecad 302 Tablet %04x:%04x", 203 le16_to_cpu(dev->descriptor.idVendor), 204 le16_to_cpu(dev->descriptor.idProduct)); 205 break; 206 } 207 208 usb_fill_int_urb(acecad->irq, dev, pipe, 209 acecad->data, maxp > 8 ? 8 : maxp, 210 usb_acecad_irq, acecad, endpoint->bInterval); 211 acecad->irq->transfer_dma = acecad->data_dma; 212 acecad->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; 213 214 err = input_register_device(acecad->input); 215 if (err) 216 goto fail3; 217 218 usb_set_intfdata(intf, acecad); 219 220 return 0; 221 222 fail3: usb_free_urb(acecad->irq); 223 fail2: usb_free_coherent(dev, 8, acecad->data, acecad->data_dma); 224 fail1: input_free_device(input_dev); 225 kfree(acecad); 226 return err; 227 } 228 229 static void usb_acecad_disconnect(struct usb_interface *intf) 230 { 231 struct usb_acecad *acecad = usb_get_intfdata(intf); 232 struct usb_device *udev = interface_to_usbdev(intf); 233 234 usb_set_intfdata(intf, NULL); 235 236 input_unregister_device(acecad->input); 237 usb_free_urb(acecad->irq); 238 usb_free_coherent(udev, 8, acecad->data, acecad->data_dma); 239 kfree(acecad); 240 } 241 242 static const struct usb_device_id usb_acecad_id_table[] = { 243 { USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_FLAIR), .driver_info = 0 }, 244 { USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_302), .driver_info = 1 }, 245 { } 246 }; 247 248 MODULE_DEVICE_TABLE(usb, usb_acecad_id_table); 249 250 static struct usb_driver usb_acecad_driver = { 251 .name = "usb_acecad", 252 .probe = usb_acecad_probe, 253 .disconnect = usb_acecad_disconnect, 254 .id_table = usb_acecad_id_table, 255 }; 256 257 module_usb_driver(usb_acecad_driver); 258