xref: /linux/drivers/input/serio/maceps2.c (revision a1ff5a7d78a036d6c2178ee5acd6ba4946243800)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * SGI O2 MACE PS2 controller driver for linux
4  *
5  * Copyright (C) 2002 Vivien Chappelier
6  */
7 #include <linux/module.h>
8 #include <linux/init.h>
9 #include <linux/serio.h>
10 #include <linux/errno.h>
11 #include <linux/interrupt.h>
12 #include <linux/ioport.h>
13 #include <linux/delay.h>
14 #include <linux/platform_device.h>
15 #include <linux/slab.h>
16 #include <linux/spinlock.h>
17 #include <linux/err.h>
18 
19 #include <asm/io.h>
20 #include <asm/irq.h>
21 #include <asm/ip32/mace.h>
22 #include <asm/ip32/ip32_ints.h>
23 
24 MODULE_AUTHOR("Vivien Chappelier <vivien.chappelier@linux-mips.org");
25 MODULE_DESCRIPTION("SGI O2 MACE PS2 controller driver");
26 MODULE_LICENSE("GPL");
27 
28 #define MACE_PS2_TIMEOUT 10000 /* in 50us unit */
29 
30 #define PS2_STATUS_CLOCK_SIGNAL  BIT(0) /* external clock signal */
31 #define PS2_STATUS_CLOCK_INHIBIT BIT(1) /* clken output signal */
32 #define PS2_STATUS_TX_INPROGRESS BIT(2) /* transmission in progress */
33 #define PS2_STATUS_TX_EMPTY      BIT(3) /* empty transmit buffer */
34 #define PS2_STATUS_RX_FULL       BIT(4) /* full receive buffer */
35 #define PS2_STATUS_RX_INPROGRESS BIT(5) /* reception in progress */
36 #define PS2_STATUS_ERROR_PARITY  BIT(6) /* parity error */
37 #define PS2_STATUS_ERROR_FRAMING BIT(7) /* framing error */
38 
39 #define PS2_CONTROL_TX_CLOCK_DISABLE BIT(0) /* inhibit clock signal after TX */
40 #define PS2_CONTROL_TX_ENABLE        BIT(1) /* transmit enable */
41 #define PS2_CONTROL_TX_INT_ENABLE    BIT(2) /* enable transmit interrupt */
42 #define PS2_CONTROL_RX_INT_ENABLE    BIT(3) /* enable receive interrupt */
43 #define PS2_CONTROL_RX_CLOCK_ENABLE  BIT(4) /* pause reception if set to 0 */
44 #define PS2_CONTROL_RESET            BIT(5) /* reset */
45 
46 struct maceps2_data {
47 	struct mace_ps2port *port;
48 	int irq;
49 };
50 
51 static struct maceps2_data port_data[2];
52 static struct serio *maceps2_port[2];
53 static struct platform_device *maceps2_device;
54 
maceps2_write(struct serio * dev,unsigned char val)55 static int maceps2_write(struct serio *dev, unsigned char val)
56 {
57 	struct mace_ps2port *port = ((struct maceps2_data *)dev->port_data)->port;
58 	unsigned int timeout = MACE_PS2_TIMEOUT;
59 
60 	do {
61 		if (port->status & PS2_STATUS_TX_EMPTY) {
62 			port->tx = val;
63 			return 0;
64 		}
65 		udelay(50);
66 	} while (timeout--);
67 
68 	return -1;
69 }
70 
maceps2_interrupt(int irq,void * dev_id)71 static irqreturn_t maceps2_interrupt(int irq, void *dev_id)
72 {
73 	struct serio *dev = dev_id;
74 	struct mace_ps2port *port = ((struct maceps2_data *)dev->port_data)->port;
75 	unsigned long byte;
76 
77 	if (port->status & PS2_STATUS_RX_FULL) {
78 		byte = port->rx;
79 		serio_interrupt(dev, byte & 0xff, 0);
80         }
81 
82 	return IRQ_HANDLED;
83 }
84 
maceps2_open(struct serio * dev)85 static int maceps2_open(struct serio *dev)
86 {
87 	struct maceps2_data *data = (struct maceps2_data *)dev->port_data;
88 
89 	if (request_irq(data->irq, maceps2_interrupt, 0, "PS2 port", dev)) {
90 		printk(KERN_ERR "Could not allocate PS/2 IRQ\n");
91 		return -EBUSY;
92 	}
93 
94 	/* Reset port */
95 	data->port->control = PS2_CONTROL_TX_CLOCK_DISABLE | PS2_CONTROL_RESET;
96 	udelay(100);
97 
98         /* Enable interrupts */
99 	data->port->control = PS2_CONTROL_RX_CLOCK_ENABLE |
100 			      PS2_CONTROL_TX_ENABLE |
101 			      PS2_CONTROL_RX_INT_ENABLE;
102 
103 	return 0;
104 }
105 
maceps2_close(struct serio * dev)106 static void maceps2_close(struct serio *dev)
107 {
108 	struct maceps2_data *data = (struct maceps2_data *)dev->port_data;
109 
110 	data->port->control = PS2_CONTROL_TX_CLOCK_DISABLE | PS2_CONTROL_RESET;
111 	udelay(100);
112 	free_irq(data->irq, dev);
113 }
114 
115 
maceps2_allocate_port(int idx)116 static struct serio *maceps2_allocate_port(int idx)
117 {
118 	struct serio *serio;
119 
120 	serio = kzalloc(sizeof(*serio), GFP_KERNEL);
121 	if (serio) {
122 		serio->id.type		= SERIO_8042;
123 		serio->write		= maceps2_write;
124 		serio->open		= maceps2_open;
125 		serio->close		= maceps2_close;
126 		snprintf(serio->name, sizeof(serio->name), "MACE PS/2 port%d", idx);
127 		snprintf(serio->phys, sizeof(serio->phys), "mace/serio%d", idx);
128 		serio->port_data	= &port_data[idx];
129 		serio->dev.parent	= &maceps2_device->dev;
130 	}
131 
132 	return serio;
133 }
134 
maceps2_probe(struct platform_device * dev)135 static int maceps2_probe(struct platform_device *dev)
136 {
137 	maceps2_port[0] = maceps2_allocate_port(0);
138 	maceps2_port[1] = maceps2_allocate_port(1);
139 	if (!maceps2_port[0] || !maceps2_port[1]) {
140 		kfree(maceps2_port[0]);
141 		kfree(maceps2_port[1]);
142 		return -ENOMEM;
143 	}
144 
145 	serio_register_port(maceps2_port[0]);
146 	serio_register_port(maceps2_port[1]);
147 
148 	return 0;
149 }
150 
maceps2_remove(struct platform_device * dev)151 static void maceps2_remove(struct platform_device *dev)
152 {
153 	serio_unregister_port(maceps2_port[0]);
154 	serio_unregister_port(maceps2_port[1]);
155 }
156 
157 static struct platform_driver maceps2_driver = {
158 	.driver		= {
159 		.name	= "maceps2",
160 	},
161 	.probe		= maceps2_probe,
162 	.remove_new	= maceps2_remove,
163 };
164 
maceps2_init(void)165 static int __init maceps2_init(void)
166 {
167 	int error;
168 
169 	error = platform_driver_register(&maceps2_driver);
170 	if (error)
171 		return error;
172 
173 	maceps2_device = platform_device_alloc("maceps2", -1);
174 	if (!maceps2_device) {
175 		error = -ENOMEM;
176 		goto err_unregister_driver;
177 	}
178 
179 	port_data[0].port = &mace->perif.ps2.keyb;
180 	port_data[0].irq  = MACEISA_KEYB_IRQ;
181 	port_data[1].port = &mace->perif.ps2.mouse;
182 	port_data[1].irq  = MACEISA_MOUSE_IRQ;
183 
184 	error = platform_device_add(maceps2_device);
185 	if (error)
186 		goto err_free_device;
187 
188 	return 0;
189 
190  err_free_device:
191 	platform_device_put(maceps2_device);
192  err_unregister_driver:
193 	platform_driver_unregister(&maceps2_driver);
194 	return error;
195 }
196 
maceps2_exit(void)197 static void __exit maceps2_exit(void)
198 {
199 	platform_device_unregister(maceps2_device);
200 	platform_driver_unregister(&maceps2_driver);
201 }
202 
203 module_init(maceps2_init);
204 module_exit(maceps2_exit);
205